What can be seen toilet in the apartment. Finishing of the toilet: types and ideas of design. The acquisition of the main and consumable material - what is taken into account

Reading time ≈ 3 minutes

To date, plastic panels are widely used for different types of repair. Their main advantage is the principle of the constructor, which allows you to disassemble the panels if necessary. Thanks to the design of plastic panels, improved walls will be able to "breathe", and this is important in conditions of enlarged humidity. Huge popularity of such material ensured its economy compared to the cafeter, wallpaper, stone.

Preparation for repair

Repair toilet plastic panels takes 1-2 days. First, you need to decide on plastic panels, with a thickness of 8 mm, which are much practical 5 millimeters. After all, the thickness of the PVC panel is less, the probability of the locking of the castle increases during the assembly, which contributes to the appearance of cracks at the joints. The amount of the desired plastic will depend on the perimeters of the room, but it will be necessary to add 10-15% of the material, as there will be many ramps during operation. When working, you need to pay attention to the water supply, which should remain open or to it should be unimpeded access.

When the toilet is trimmed, metal profiles UD and CD are used. In addition, a dowel-nail-nails of 6x40, suspended brackets for fastening profile, white silicone glue, press-washers with dimensions of 3.9x16.

From the tools will be involved: Bulgarian, water level, hammer, perforator, cutter.

Installing the panels on the ceiling

Toilet repair with plastic panels with their own hands is quite simple. You just need to consistently carry out such actions:

1. collect the frame consisting of a metal profile for fastening plastic panels on it;
2. beat the ceiling level line using water level;
3. uD profile fix over the ceiling line using a dowel-nail. Further to the UD profile, thanks to the press washers, fix the CD profile. Each CD strip must be attached to a distance of 60-70 cm and shoot them in two places so that the ceiling does not be down with time;
4. the set of panels is recommended to start from the side with the best overview, because with a large share of the probability, the last band will need to cut.

First we attach the starting strip, from which and start the installation of plastic. Each plastic strip is attaching a press washer to the CD profile.

You need to be very careful with plastic, which is fragile and with careless movement you can break the lock. You can view the video and photo repair photo by plastic panels in this article.

Repair of walls

The principle of operation with the walls is a similar process on the ceiling. Initially, we recruit a metal frame from profiles, taking into account all levels. And do not forget to make a vertical partition, so that the stiffness of the structure will increase. For dusting bands on the corners, an internal angle is used. As in the case of the ceiling, the set of plastic is starting from the side with the best overview. The outer angle is used in the process of plastic dusting, when repairing a toilet with plastic panels to close the sewage pipes. The fastening of the upper plinths or baguettes is carried out by silicone glue, but the lower can be targeted by a dowel-nail.

August 4, 2016
Specialization: Professional in the field of construction and repair (full cycle of finishing works, both internal and external, from sewage to electrician and finishing), installation of window structures. Hobbies: Watch Column "Specialization and Skills"

To understand how to shelter toilet panels, I had to be called, in the "Avralian order": there was a need for the shortest possible time to bring the bathroom to the condition suitable for operation, while the budget was minimal.

After studying the literature and consulted with the specialists, I began to work. The result was quite acceptable, so in this article I will talk about those nuances to which the beginning to the master would have to pay attention to.

Material for finishing

Plastic lining and other consumables

If the task is to perform the finish quickly and inexpensively, then the optimal option will be the sheathing of walls by plastic panels. This technology does not contain so-called "wet" stages, because in the process of work it is not necessary to wait until the solution or glue dry.

1. The material for the trim is the polymer panels, the standard length of which is 2.5 - 3 m.
2. Inside the panel make hollows, which reduces their weight, increasing the heat and sound insulation characteristics.

Most of the plastic lining models are still difficult to call a good heat insulator, because in cold rooms I would recommend to mount a layer of moisture-proof insulation under the trim.

1. The long sides of each panel are drawn up in the form of the castles "Schip - groove". The presence of these locks makes it possible to firmly fit the details to each other, avoiding the appearance of the gaps, but while saving the mobility required to compensate for the temperature expansion.
2. Special adapters are used to connect their products to capital surfaces and to connect them at an angle. Their assortment is quite extensive, therefore on sale you can easily find the item you need.

1. The surface of the panels can be smooth or textured. The products with the applied texture look more attractive, but require more careful care: dirt accumulates in the deepends on the surface, therefore it will have to wash the bathing of the bathroom and more often.
2. The color of the products may also be the most different. A cheap segment is represented by monophonic plastic, but I still like panels with imitation of stone or wood. Yes, they are more expensive, but such a finish looks expressive.

In addition to the plastic itself and additional elements, we will also need other materials. The approximate cost of raw materials to perform a toilet cover is provided in the table:

As you can see, consumables are not very expensive, therefore it is advisable to purchase them with a slight margin. I usually take 15-20% more than it is obtained by calculations.

Pluses panel plating

In plastic panels, like finishing material for bathrooms, there are a number of objective advantages:

1. The finish price will be really very low.. It would be cheaper, perhaps, only paint the walls, but it is possible only if they are perfectly smooth. Otherwise, we will spend a lot of time and money on plastering and putty.
2. The technique of finishing does not involve the use of expensive components and complex tools. Yes, and to the skills of the plastic masters are not very demanding: it is quite enough of the usual skill, but to figure out how to install the panel more correctly, and it is possible in the process of work. Fortunately, installation technology allows you to correct the mistakes made.

1. The plastic surface is obtained by a fairly effective protection against moisture, since the trim is characterized by high tightness. At the same time, the panels themselves do not swell and do not deform in a humid environment.
2. Finally plastic can be washed regularlythat the toilet is a prerequisite for maintaining a sanitary condition.

By minuses, I would be attributed to the most presentable look: after all, the panels are better to use the bathroom to cover either in a typical apartment or in the country, but for a home with good repair it is worth picking up more expensive finish. The strength of the material is also relatively low, but to compensate for this shortage it is enough to know several tricks that I will tell below.

Technology of work

Preparation of the room

If the walls in the toilet are smooth enough, the panels can simply stick non-bearing surfaces. But this situation is found very rare, because a significant part of the time, which will be required to repair the bathroom, will take preparation for the trim.

We do this:

1. Old decoration knock down, exposing a concrete or brick base. The removal is also subject to facing from a tile: if this is not done, then sooner or later the tile will begin to fall off under the trim.

Firmly holding paint and plaster, which is not going to crumble, I usually leave solely for the purpose of saving time. Even if under the plastic they will begin to get out and disappear, it will not be visible anyway, it will not affect the functionality of the finish.

1. Check the wall for cracks. Detected defects will be expanding, we clean from the garbage and fill in the repair makeup. Cement mortar or cheap tiled.
2. In order for the plastic panels, fungi and bacteria do not develop, process all the surfaces of antiseptic primer. I usually make two impregnation with an interval of 6 to 12 hours: this time is just enough to dry out the material.

1. If the ceiling is assumed to be assumed, stretch the wiring in advance to connect the built-in luminaires. The wires are placed in special housings protecting moisture, and secure to the ceiling on plastic clamps or suspensions from the wire.

Frame

Next, the instruction involves the installation of the frame to which the plastic lining will be attached. To make the carrier crate, you can use either wooden bars (cheaper, but need to impregnate with antiseptic), or metal profiles (more expensive, but they are not subject to corrosion and allow you to form a significant gap between the trim and walls).

I prefer an option with a tree. Perform work according to such a scheme:

1. Wooden bars process with antiseptic impregnation, drying for 12 hours and cut into size.
2. We put a bar to the wall, drill holes in it with a drill, then a label on the wall holes on the wall and the perforator with a brought on a concrete I do the nests under fasteners.
3. Since the panels are mounted vertically, the framework details I have horizontally, with a step of about 50 cm. The optimal solution is the laying of crawling belts at the height of the knee, hips and shoulder: so we precisely guarantee that plastic will not be damaged with an awkward movement.
4. After drilling holes, I score plastic dowels in them. I apply the bars and fixes their locking screws, slightly bleaks their caps in the wood.
5. Separately fix a few thick boards to the wall, securely installing them with several anchors. I note on the drawing the position of these parts with an accuracy of a centimeter - it is later to them subsequently and the hinged elements will be fastened (the handicraft, a shelf, mirror, fastening for the herox, etc.).

1. Just make the crate on the ceiling. For laying cables with cables, cut into the bars of the grooves of this size so that the wires are not cordial.
2. Sometimes there is a question - how to sheathe in the toilet pipe with plastic panels. If the riser is located in a niche, then there are no problems - we simply close it with the crate. But the sewer pipes, standing along the wall, you need to mask a separate box - for this I install a vertical bar, which fixes on the floor and on the ceiling with metal corners, and then make a crate under the panel.

To provide access to pipelines, a square from a thin bar is sure to be laid at the bottom of the box, to which the revision hatch will then be mounted.

In principle, the framework of the steel profile is also made on the same scheme - with the only difference that it's more complicated with the metal with the metal than with a tree. However, if you were dealing with plasterboard, then no difficulties for you are foreseen.

Cleaning and finishing

When the frame will be ready, you can proceed to the toilet trim. The room is small, because the work will not take much time:

1. At the corners, we set starting profiles, carefully aligning them in terms of the level and fixing with glue, screws or brackets to the crate.
2. On the perimeter of the room in the upper part fix the ceiling profile, which will serve to connect the vertical and horizontal plating.
3. The first panel is cut in height (the item must be about 5 mm less than the height of the room - this gap will provide unhindered temperature deformation). Insert the panel of the castle spike to the starting profile in the far corner and thoroughly align vertically.

1. Fix the free edge of the panel to the frame, using either self-tapping screws or glue, or steppeler. I consider the last method preferred: and quickly, and simply, and if necessary, you can disassemble the design with minimal damage to the material. The top edge of the lining at the same time starts in the groove of the ceiling plinth.

1. The next panel insert a spike in the groove already installed. We repeat the alignment and fixation. We continue to dial the panels until we do before the corner.
2. The last panel is cut along (soft plastic cutting with a painted knife, a hard - saw with small teeth) and insert into the starting profile without fastening, just bending along the length.

1. By the same principle we are wearing the walls, ceiling and box, masking sewer pipe. In the ceiling panels on the markup we make holes for installing built-in.
2. A revision hatch is installed on the pipe box.
3. Bottom fix the plinths, masking the lower edge of the panels. All cracks sealing moisture-resistant silicone.

Conclusion

Relaxing than to sew the toilet in the apartment is primarily considering the possibility of using plastic lining. You can learn how to work with this material after the minimum practice, accompanied by reading recommendations and watching the video in this article. And for consultations on complex and controversial issues, please contact the comments!

Toilet repair by plastic panels is the best option for those who wish to make budget repairs in the apartment. This method has several advantages. First, you can acquire a sufficient amount of inexpensive material. Secondly, it is very easy to establish independently, which will save considerable funds to pay to the masters.

Plastic panels - Features of the choice of reliable material

Before separating the toilet, you need to select high-quality panels. The market has a huge range of these products, but not all products meet the requirements of modern quality standards. The buyer is quite difficult to visually determine the reliability and safety of the products offered. So that you do not "run out" for defective panels, we will open you a few secrets. They will make it possible to choose a really high-quality material that will serve for a long time.

PVC panels should include additives intended to improve material elasticity. Due to the presence of these components, the products are easily bend and are seriously soluble by random mechanical damage. If you are offered plastic on which there are dents from pressing a finger, it is necessary to abandon such products. This material is not able to serve for a long time. In addition, he will lose his initial appearance in a year.

To easily check the quality of the material, it is worth doing the following. To begin with, take two fingers over the edge of the panel and squeeze the product. As a result of the ribs that are inside, do not deform or get bend. In addition, dents are not allowed in the upper and lower part of the panel. Then try to start the assembly strip of the material. It is on the edge of the product and forms a docking lock. As a result, this part of the material should not break or crack. In high-quality materials, it quickly returns to the previous position, and no traces remain on the bending lines.

To check, attach the panel to the nose. The product should not make any unpleasant odors. If you felt a sharp chemical smell, it is better not to use such a material for. Most likely, this plastic is created from cheap raw materials or with impaired technological standards of production. If you buy these panels, then the toilet will be an unpleasant smell dangerous for the health of evaporation.

In stores you can find panels of various widths. In small rooms it is worth using too wide products, since after work there will remain a large number of unsuitable waste. Therefore, in order not to guess the finishing with the desired partition, before, it is necessary to measure them and calculate the required amount of material. Another important nuance when choosing a product is the availability of a certificate from the seller. The document should contain a manufacturing country and product compliance with all sanitary and technical standards.

How to buy material and carry out the necessary measurements?

In order for the finishing of the toilet with plastic panels with their own hands, it should be prepared for work. First, do all measurements and buy materials. A mandatory measure will also prepare tools and surface treatment. The purpose of the measurement is to find out how many panels will be needed for work. It is also important to calculate the number of profiles that will be useful for the design of outer and internal angles. In addition, profiles will be necessary for mounting panels to floor lines and ceiling. Often these elements of the finish are needed to install the door, windows and cabinets, if such works are also included in the planned repairs.

The choice of profiles directly depends on the designer idea, the size of the toilet and the installation techniques of the panels in some areas of the room. As for the main material, its quantity must be 15% more than the result of measurements. A certain part will go on trimming. Do not exclude and incorrect cutting or random panel damage.

Remember that you will also need material to install the crate. In most cases, housing owners need to save every centimeter of the apartment, so the toilet has a small area. In this regard, wooden rails or metal photographs with a cross section of 50x20 mm are suitable as a frame. To calculate the number of regards, you need to take into account that the guide crates will be located at a distance of 50-60 cm. From each other. In addition, calculate the number of parts of the ceiling frame and decorative box, which will hide the pipes. But this is only if you are planning to finish and in these sections of the toilet.

In order to secure the frame on the wall surface, you need to purchase a dowel of such a length so that they can be screwed into the wall by 40-50 mm. To find out the number of fasteners, take into account that their step during installation will be 40-45 cm. To fix the panels on the frame, you must purchase a self-tapping screw with a length of no more than 20 mm. If wooden slats are used as a crate, then it is better to use a 10 mm long brackets for fixing. If you are perfectly smooth walls in your toilet, then you can not do the crate. In such situations, plastic panels are glued directly to the walls of liquid nails or tile glue.

Preparation of the room - how to level the walls before finishing?

As in the case of other types of repair work, the lamination of the bathroom with plastic panels requires the presence of the necessary tools. Having them at hand, you will not be distracted in search of the desired equipment. For work it will be necessary:

• screwdriver and a set of bits to it;
• electric drill or perforator;
• drills of different diameters;
• manual or electric jigsaw;
• scissors for working with metal, if used metal profile;
• stationery knife;
• a hammer;
• square and roulette;
• marker or pencil;
• stapler and construction level.

To prepare the surfaces of the walls, you will also need a construction hairdryer, spatulas, brush and roller for primer. Particular attention should be paid to the building level. It must have a horizontal and vertical pointer. This tool will help achieve the most smooth surface of the walls in the toilet. If you are going to specifically buy a drill, and a perforator, then you can do only one drill. It is important that it has a perforation function. Such a tool will cost a little more expensive, however, you will save funds to buy a separate perforator.

To level the walls in the toilet, first need to remove the entire old finish. This will help to exclude the appearance in space between mold and fungus. To remove the old wallpaper or finishing of another type, use the metal spatula. If you need to clean the walls from worn wallpaper, but they have already managed to grasp firmly with the surface, then for cleaning you can apply a hot water to the old finish, using a roller for this. It is necessary to remove the material in those places where it began to separate from the wall. If earlier the walls in the toilet were painted painted, then before repairing it is not necessarily completely removed from the surface. The main thing is to remove the dried composition where he began to peel.

After cleaning the surfaces on the walls, make marking. This is necessary in order to determine the size and number of decks for the crate. If you chose wooden slats as the latter, then at the next stage, prepare them for installation. At first they are cut in size, after which they are impregnated with antiseptic composition. It is best to do it on a balcony or in any other room where there is draft. While the rails were not dried, the walls and ceiling of the toilet can be applied to the toilet. It is best to apply 2 layers of this composition. If you use a white primer, then the marking of the walls must be made only after drying the material on the surface.

Production of crates - option for uneven surfaces

The finishing of the toilet panels PVC is one of the last steps of repair indoors. First of all, you will need to consolidate guide crates. It is necessary to do this only on dry smooth walls. Before installing, drill in the holes of the hole, the diameter of which will correspond to the diameters of the dowels. After that, the rails are applied to the markup. In each of the holes in the rail, you need to push the drill and mark the places of drilling in the wall. Then the rake is postponed to the side, and the place marked in the wall is drilled on the length of the dowel.

To secure the rail, it must be applied to the markup again so that the holes in it and the wall coincide. After that, we take a dowel with screwed screws and take turns into the walls through wooden guides. Similarly, all the elements of the crates are installed.

Before you sew walls in the toilet with plastic panels, you need to make a decorative box. It is made from the metal profile and serves as a place where the pipes and other communications will be hidden. To make a design, install vertical racks under the ceiling so that they are located on the sides of the sewer rim. After that, the vertical elements are bonded by horizontal guides. To hide all the pipes, the box frame must pass on the sides of the communications so that after installing the panels it was not visible.

Installation of panels - how to solve the walls of plastic yourself?

Next, proceed to the walls of the walls. Start best of all out of the far corner. All vertical panels that are installed to repair the toilet must be aligned using a level. Only after that they can be screwed. Remember that the right position of the first panel depends on how even other products will be screwed!

In the event that one or more walls in your toilet are perfectly smooth, then it makes sense to mount the crate on them. In such a situation, the panels are better glued directly to the surface. To do this, we take liquid nails and apply to their thin layer on the wall cover. After that, we apply plastic lining and until the glue is dry, align each of the panels. After you finish the walls, carefully install the material on the decorative box. To do this, take the first panel and apply it to the frame. We note the place of circumcision and shocked the product according to the specified lines.

Next, we screw the lining with screws and repeat the procedure with the rest of the material. In the corners and joints, use special, which will make the finish more accurate. If the finishing of your toilet plastic implies the installation of the material and on the ceiling, in which case do not forget to do in the holes in the holes under the illuminators. If you use spotlights, then you need to cut circles, the diameter of which will be the same with the diameter of the lamps. If you have a small ceiling, the hole must be sizes so that you can turn it into it necessary to connect the wire bulb.

No family in our country and abroad did without such an important event as repairs. In any case, it is inevitable that it is necessary to carry out repair and finishing work, both in the bathroom and in the toilet. And there is no such big scatter in the techniques and materials, such as in the living room or bedroom, but even a small separate toilet can be turned into a stylish and cozy place.

Plastic panels for walls of the bathroom and toilet

Many have heard of wonderful and beautiful PVC panels that can be used for both the walls of a bathroom or bathroom and the ceiling, and some types of such panels can be laid on the floor surface. It all depends on the personal wishes of the person and its material opportunities.

On today's rich building material market, you can find a large range of types of plastic panels, which are able to harmoniously decorate any bathroom and join the concept of almost any design.

Types of material:

• Plastic wall panels decorated with decorative frieze;
• Sheet plastic sheets of sheet type;
• PVC panels, imitating wood;
• Photo panels;
• Plastic panels with a pattern, applied laser way;
• PVC panels with thermal printing.

Photo-panels - decorative panels with photo printing applied to them. Allowed to create design panels for walls with almost any image, whether it is a view of the fantastic world, a magnificent waterfall or the face of the unloved superiors.

It all depends on the wishes of the customer and the ideas of a specialist in design.

Each of these types of panels for the finishing of the toilet or bathroom can be used in the interior of any complexity and theme, whether it is a hint of a Victorian house, or imitation of the style of Provence or Modern.

Preparation option PVC panels: Examples and photos

Despite the fact that many people have already seen how beauty can be done with plastic panels for walls, what the most interesting and exclusive ideas can be realized, they still do not understand why familiar or relatives have given their repairs Preference precisely this type of panels, if there are many other materials, for example, the MDF panel.

The whole secret is the advantages of PVC panels in front of another decorative finishing material for walls:

1. In the case of finishing the walls of the toilet with plastic panels, the person does not arise such a question as special preparation of the work surface of the walls. Panels can be mounted even on not the smoother surface. This, as practice shows, allows you to save material tools that usually leave for additional work on the leveling of walls. In addition, the panels allow to hide defects and irregularities of the walls.
2. Light plastic panels can install one person, it is also a big plus, because in the bathroom or, moreover, the toilet, not so much space so that you can turn around to several masters.
3. PVC panels are an exceptionally environmentally friendly finishing material. For all the time of its service, plastic under any temperature conditions remains safe for people and animals. The trimmed toilet with such wall panels is not subjected to rotting, it does not form mold or fungus even with the highest humidity, which makes the plastic material ideal for use in the bathroom.
4. Finishing with such slabs gives a guarantee of light cleaning. Any hostess will confirm that this is a big plus when you do not need to think about how to better hold a wet cleaning in a particular room.
5. Ease of installation allows you to install even a novice master.
6. Excellent appearance of the material. Any pictures can be depicted on the panels. It looks all this beautiful and effectively.
7. Large service life. With proper care, plastic panels can serve as many decades.
8. The covering of the walls of PVC panels is rather cheap due to the availability of prices for the material itself.

All these pluses of plastic panels allow them to become increasingly popular and chassis for use in the interior of the toilet or bathroom. And yet, as practice shows, there can be no one advantages. Wall panels PVC has a minus - they can be rather fragile, and break out if they are having free or throw in the wall with something heavy or sharp.

Application of panels in the toilet: photo and methods of decor

Designer solutions of specialists may imply the use of plastic panels for different surfaces and planes. By themselves panels from plastic, depending on the thickness and maximum load, can be installed on different surfaces.

Namely:

1. On the walls. Classic application of plastic panels. Here, the choice of the type and quality of the material depends only on the wishes of the person himself, the ideas of the designer or the volume of disposable funds.
2. On the ceiling. It is often used for a visual increase in space. For example, with the help of panels, you can turn the ceiling into the solar clear sky, or the star night sky. Thus, the ceiling in a large toilet is capable of making a person's brain to perceive the bathroom at a larger scale.
3. On the floor. Outdoor panels are used not so often, but also quite popular. With the help of panels, you can make from the usual boring toilet floor the bottom of the ocean or cosmic simply, that is, everything that the soul wishes.

In addition, it is worth mentioning that at this stage in the construction and finishing materials market there is an extensive selection of coloring panels for any destination. You can meet red, black, white panels, motley or pictures.

The panels using photo printing are very popular.

For example, this method can allow to recreate in a bathroom or toilet room atmosphere of stay on the paradise island or in the open space or the ocean, where the complete feeling will be created that the owner among exotic fish, especially if the walls, and the floor, and the ceiling will be Made in one style.

Repair in the toilet with plastic panels: photos and examples

When a choice is made at the place of installation of panels, their mind, colors and all the nuances are clarified, the question arises in front of a person "But how does the installation of plastic panels?". There are following options - contact a specialist finishing work, pay him a certain amount and enjoy the work done or do everything yourself. The last option is more economical, besides, if you make repair with your own hands, it will be much more pleasant.

If you decide to carry out an extensive installation yourself, then you must first determine the type and features of the installation work with plastic tiles. If the self-adhesive PVC tile is used, then the work will not take a lot of time. It will be necessary to remove the protective layer and glue the finishing material to the surface. It is worth understanding that in this case it is better to make a sticking on a flat surface. Installation using glue - the rear surface of the tile is processed by a thin layer of glue. Next is glued on the surface of the wall of the bathroom or toilet. Installation work using the crate - in this case, it is not necessary for the perfectly smooth surface. The plastic or metal crate system is attached to the wall, to which the plastic panels are subsequent. Tile and panels are fastened with glue solutions.

Toilet finishing with plastic panels: design (video)

Someone prefers to make repairs at once in the whole house or apartment at the same time, someone prefers to leisurely gradual repairs, when they are tightly engaged in one room in his home, then another, and gradually the whole house is renovated, but making everything in their ideas, It turns out very beautiful.

Any room in which some time people are, should look neat and clean. At the same time, not only living rooms can be comfortable, but also a bathroom with a toilet. If the renovation of the bathroom does not cause questions, and they always try to do everything carefully and beautifully, the toilet often remains finally. It is possible to make a bathroom comfortable and possible with the help of various ways: some of them are labor-intensive and expensive, and some, such as the use of plastic panels, allows you to quickly, inexpensively and without any special problems achieve the desired result.

Features and advantages

PVC panels are a modern material that is convenient to use for different premises, but especially well, he showed himself in the bathroom and toilet. You can use them not only for walls, there are special varieties for the ceiling, and even for the floor.

With a limited budget, the use of such a material will allow to obtain a well-finished room with minimal cost.

PVC panels have such varieties:

• wall variant with decorative frieze as decoration;
• sheet variety;
• with imitation under the tree;
• photophalles;
• with a pattern that is applied using a laser;
• with thermal printing.

Toilet finishing with such plastic panels can help create some specific coloring in this room, the atmosphere, a pleasant environment in which any visitor will feel at home.

If there is no clear confidence that PVC panels are exactly what is needed for good and inexpensive repair, the listing of all the benefits of the material should not leave any doubt.

We list the positive features of this cladding material.

• Convenience and simplicity of installation, with which even a beginner can easily cope, having no experience in this business.
• Significant budget savings on the entire repair. In comparison with the same cafeter, the finish will be cheaper several times.
• It is possible to bring the bathroom in order without additional events to equalize the walls and so on that save strength, time and money.
• Panels have good waterproofing, therefore you should not be afraid of moisture from entering them. To fully protect yourself from problems with dampness on the walls, you only need to use waterproofing.
• It is very easy to care for the walls that are decorated with this material is very simple - enough simple washcloths.
• Long service life, therefore the repair will last for a long time.

Panels are not afraid of household chemicals, therefore they can be used to quickly wash themselves to maintain the full cleanliness of the bathroom.

Positive qualities speak for themselves, but do not forget about a number of deficiencies with which you need to get acquainted before the repair process will be started.

So, the minuses include:

• the combustibility of plastic panels, which in the combustion process allocate harmful compounds;
• to carry out repair work, it is important to correctly select a model of facing material and it is necessary to correctly apply it relative to a particular room;
• the size of the room after repair becomes smaller for several centimeters, which must be considered if there is a need to hang the shelves or install equipment.

The use of PVC panels in the repair of the bathroom and the toilet is very convenient, as the result is very good with small spending on materials, and the process itself can be carried out independently, without causing specialists, which will also affect the final value.

Selection of material

In order for the repair of the bathroom to be crowned with success, it is important to choose the materials for him correctly. Whatever panels are needed: on the ceiling, for walls or on the floor, it is important to know the main selection criteria that will help you find exactly what you need. A variety of such materials is very large, manufacturers actively replenish the model range, releasing options with prints, drawings, photos and pictures that will like to any consumer.

Any products must have a proper quality level, whether it is high-class expensive samples or economy-class materials.

Choosing PVC panels, it is worth paying attention to several nuances.

• The composition must be additives that improve product elasticity indicators. Subcase options for pressing are losing the form and can be deformed, or even break at all. If you press the panel from two sides with your fingers, then the material should not bend or squeeze.
• When filling the panel lock in high-quality products, this part will return to the place without any changes, and in poor quality will be bludging or broken.

• The surface layer of high-quality panels should be perfectly smooth, it should not be seen to the ribs of stiffness and any other irregularities. If they are, it means that low quality material.
• Taking the panel into the hands of PVC, it is worth paying attention to the smell that comes from it. If there are obvious signs of chemical and unpleasant compositions, then the product refers to cheap. The presence of such a smell may indicate that in the production of materials used unsuitable raw materials, which can threaten the health of people.

• Manufacturers took care of the variety of product options, including width. If it is necessary to separate a small toilet, the widest panels are inappropriate, since they remain a lot of cropping, but if the dimensions are exactly suitable for some of the size of the finishing material, it can be safely acquired.
• If the repair is planned for conscience, then when buying products, it is worth asking for quality certificates for all the options to make sure the manufacturer's conscientiousness and protect yourself from the risk of poisoning or unplanned repairs in the near future.

Wall panels for the toilet can be any coloring, widths, have a drawing or be one-photon color, only the design of the room changes from this.

It is most important to find high-quality materials with the necessary dimensions to quickly repair and use the updated bathroom with pleasure.

Decor options

Deciding with the material that the toilet will be finished, it is important to find not only high-quality panels, but also those that will answer the design of the entire room. The bathroom should be a logical continuation of the common idea, not stand out and cannot be contrasted with it. In order for any repair work in residential rooms in the toilet, it was always cozy and beautiful, it is important to choose neutral design solutions.

First of all, it is necessary to decide whether there will be a panel with a pattern, or their color will be monophonic.Each owner itself solves this issue, taking into account personal preferences, the size of the bathroom and the overall concept of repair. The next step will be the choice of the color scheme of the finishing coating, which is also selected taking into account various factors. For those who do not set themselves the task of creating something particularly beautiful and intricate in the toilet, it is best to choose one-photon light panels that will always look good, decorated with a room. Most often white color is used for those rooms that have small dimensions, or in them are interesting sites of plumbing or household appliances who want to emphasize without distracting attention from the main goal.

If the bathroom is combined, or simply has large dimensions, then dark or contrasting shades can be replaced by light tones, which will not visually reduce the space, but will give it an interesting look. If you want to add something interesting in the design of the room, then the presence of a pattern on the panels will become the very highlight. Most often in the toilets use abstractions or geometric shapes, as well as unobtrusive flowers look good.

Combined bathroom is best decorated with panels with the image of the sea, the beach, seashells and any other marine theme.

If there is a desire to make the room with elegant and stylishly looking, then it is best to use a material with a wood imitation, marble or other stone. It is important that the drawing is shifted clearly and efficiently, otherwise the entire effect will be lost. You can use the PVC panels both around the perimeter of the room and on some sites, combining with a tile, painted by a wall or wallpaper. If you need to close the communications in the toilet, then plumbing rollers are perfect for this, which look aesthetic and provide free access to all pipes.

As for the color of the panels, then, besides white, beige and yellowish shades, you can successfully use and darker options: blue, blue, lightning, green, red, purple. In order for the room does not seem oversaturated colors, it is best to dilute saturated shades with lighter and calm. Such a technique will help make the design of the toilet interesting and attractive, besides, he will always fit into the overall concept of the entire apartment.

Actual trends in registration

Plastic panels are cheaper than all materials for finishing the bathroom and toilet, therefore many consider them a not suitable option for creating a beautiful, strong and cozy room. If you choose the right PVC coating, you can achieve results not only no worse, but is largely even better than when using a tile or other trimming methods. To the advantage of such a material, you can attribute the opportunity to try and experiment in search of an ideal color solution or design idea, because to install and dismantle the coating is very simply unlike other options.

To make the interior beautiful and interesting, you can alternate colors in the toilet or use the whole color series at all, the so-called reference to Ombrov, where one shade goes from the very dark to the darkest, from the strip to the strip, which looks very effectively. If it is impossible to make the bathroom cozy, it's best to handcap the wood texture with the task.

If you need to give the room lightness and space, then the texture of the marble or other stone is best coping with this.

Modern trends require new and fresh solutions, one of which is a combination of two different options for the panels from the bottom of the room and on the rest of it. Most often, such zoning is carried out at a level of one meter from the floor level, highlighting in other color, which is usually darker main. Fresh and originally a combination of not only colors, but also a picture. It can be small polka dots and large flowers, abstraction and monophonic panels, a bright pattern on one wall and monophonic materials on others.

For a small toilet will be appropriate to use white panels with salad leaves or gentle small colors, which visually expands the space, making it easy and picturesque. To create a unique design, you can select one wall for PVC materials, while others are painted in white. It is important that the panels have bright, accent color and alternated through one with white. This technique will help expand the room using the color spot. Any design selection should be selected taking into account current trends, wishes of the owners and the size of the toilet.

Combining all the indicators and give the desired result.

Planning orientation

The layout of the bathroom has every different, in the panel house it will differ from the brick size, height and even the thick walls. There are apartments in which there is no possibility to make two separate rooms, it requires the construction of a combined bathroom. Repair of a large or small room in the apartment is always time-consuming and costly lesson, but if you choose the correct materials correctly, then the procedure can be accelerated and made the most inexpensive.

The use of PVC panels in the toilet is convenient for many reasons, therefore the demand for them grows constantly. In order to update the interior of the room, you need to find high-quality materials and install them correctly. The correctness of the installation process is to, draw on the layout, choose the most logical option. In the event that there is low ceilings in the room, it is better to mount the stripes vertically, which visually makes the toilet above, if the room is very small, then it is necessary to install the parts horizontally to pull the walls in length.

In addition to changing the number of materials on the walls, it is worth calculating the cost of frameworkwhich for each case will be built in different ways. With vertical laying of panels, the frame is mounted horizontally and vice versa. An important stage will be the installation of the crate, which should be clearly adjusted by the level. The evenness of the walls will depend on this process, the correctness of the angles and joints. The layout of each toilet is unique in its own way, so it is important to navigate the measurements of the room, to spend everything clearly on them, and not according to otherwise recommendations.

The technical compartment in the room can also be in various places, go beyond the walls or be organically included in them, which, in turn, requires a framework of a frame or a special door or rollers for convenient access. In addition, the guidance of the convenience of using the repaired toilet and that there are niches and shelves in it, where all the things needed for this room will be located. This should be foreseen at the frame assembly stage so that you can immediately mount the shelf, the protrusion, where the locker is or another version of the storage location of hygiene.

Almost every toilet is now equipped with a water meter, which one also should not forget, because it will need to either leave in sight or gently hide with the possibility of easy access. If this item remains on the ferris, the corresponding holes are cut out in the panels that are suitable for the diameter of water pipes, if it turns out a box, it is preferred to equip it with a special door that easily opens and closes.

All items are now easily found in building stores, most importantly, know how and what to use.

Combined bathrooms often contain in itself, besides the toilet and bath, also washbasin, household appliances, can be ventilation window and ventilation itself. Holding the number of materials, it is important to choose the width of the panels correctly, from which the ease of installation and waste depends largely. You can select products of different widths for each of the walls, if they have significant differences and features. The main thing is to purchase the same coloring or drawing of the panel, or think about some kind of original idea that will be dictated by the need to adhere to the planning, but will help in creating a unique appearance of the bathroom.

Self-trimming: Step by step guide

To seize the toilet with your own hands using PVC panels, you need to properly build a workflow, without forgetting about all important points. First of all, it is necessary to correctly conduct measurements of the room, accurately writing all the measurements. This will help you buy the required amount of materials, having previously calculated their width. Proper preparation for repairs is the key to its successful conduct, therefore it is worth taking care of the availability of all tools that will be needed during the work.

Planning a trip to the construction store for materials, it is worth remembering about the accessories, without which it is unlikely to do high-quality and beautiful repairs.

The fitting profile in the decoration is needed:

• for use in external and internal angles;
• to mask the junction between the panel and the floor or the ceiling;
• for accurate mounting of lockers, doors, windows, which were thought out in advance.

Such finishing elements are quite a lot, it is molding connecting, ceiling, end, for the inner angle, for the outer corner and starting, as well as many other necessary parts. Therefore, you need to accurately determine the repair plan to select the desired option. As for the panels themselves, they are taken with a reserve at least 15%, taking into account the trimming or unforeseen circumstances. Next is the purchase of material for the crate: it can be a metal profile or a wooden bar. It is important to choose the most subtle options, for example, a section 20 by 50 mm to minimally reduce the size of the room.

If any additional facilities are planned, you need to buy a profile with regard to these buildings.

The lamp is fixed on the wall of the dowels, which must reliably hold the whole design, which means to enter the wall at least 5-6 cm. For a wooden bar, you can use a building stapler with special brackets. If the room was decorated earlier, and the walls in it are smooth, you can install the panels directly on them without a frame, the seasy material using glue or liquid nails, which are important in the desired quantity.

Building a wooden crate in a bathroom, especially general, it is worth taking care of the composition of the compositionwhich will protect the tree from moisture, microorganisms and decay processes. In addition to such a fund, it is important to purchase and primer for the processing of the walls on which the PVC panel will be put.

Any repairs do not cost without tools that should always be at hand.

If we are talking about installing plastic panels, then you need to cook:

• screwdriver and bits to it;
• perforator or drill, which can perform the same functions;
• drills that can be operated on both concrete and wood;
• lobzik, electrical or manual;

• in the case of using metal profile, we need scissors for metal;
• ordinary hammer;
• stationery knife;

• roulette, level and corner;
• pencil or marker for marking;
• roller or tassel.

As additional tools can be needed: spatulas, construction hairdryer, if necessary to work with walls.

Before separating the walls with a new material, you need to remove the wallpaper from them if they are, and the paint, which was peeling. After that, it is necessary to mark the placement of the room, it will give information about the number of material for the crate. Length and height will differ depending on the vertical or horizontal installation of the panels.

If the fence is from a tree, then after it cuts it to handle every detail with a special tool and leave until complete drying. While the boards will be filled, you can work on the preparation of walls and the ceiling, namely: priming. It is best to apply two layers of this composition at once for a better result.

Drying each of them will be no more than two hours, it is enough before the crate can be mounted.