Wooden doors bring a special charm to the interior, but only if they look decent, and the paint is applied neatly.
Cracks on paintwork, faded shade and losing paint on the doors, are able to spoil all the impression of the room.
There is a need to remove the old paint. For this, proven chemical, thermal and mechanical methods are taken into service.
For details on how to remove the old with a wooden door, we will tell in the article.
Choosing a way to remove old paint, a question may arise, whether it is necessary to delete it at all? The answer to this question and the choice of the coating removal method depends on the following factors:
- type of door surface;
- coating condition;
- type of paint used;
- coating strength with wood;
- thickness and number of layers.
The most harder will remove the laying of a paintwork, which has a good grip with the material, and the door itself with a complex surface relief and a mass of decorative elements.
If the door is designed for subsequent painting, then depending on the state of the coating, you can do sweep by sandpaper. This is possible when the paint was applied neatly into one layer and does not contain detachals and chips. The old coating is simply processed by sandpaper, and you can apply a new layer.
Old paint layers, which, under the action of atmospheric influences and time, have significant defects (chips, cracks, bloating), have to be removed. It is also necessary to remove a too thick layer of paintwork, which has frozen drips and other results of non-accurant door processing in the past.
It happens that the new door paint is incompatible with the old one. This is also a reason to completely remove the paint with wooden doors.
Preparatory work
Pre-training doors requires purification from dust and dirt. Also it is necessary to consider the swollen layers.defined from the foundation. If one of the parties in the future will be hidden, for example, by the upholstery of the dermatitin, the paint can be carefully not removed - just consider the detachment.
Deciding with the character and scope of work, you should choose tools for removing the paintwork.
Be sure to:
- rag;
- putty knife;
- individual protective equipment (respirator, special glasses, gloves).
For a chemical method, we will need reagents, a bucket with water, a tassel for applying a special composition. Mechanical and thermal method will require the presence of a special tool (grinding device, drill with nozzles, industrial hair dryers).
How to remove at home?
To remove old paint with wooden doors one of three ways is used:
- Mechanical impact.
- The use of chemical reagents.
- Exposure to high temperatures.
Each option has its own strengths and weaknesses. Depending on the specific situation, a suitable method is selected, the appropriate tool and drugs.
Thermal methods
The thermal method of cleaning the wooden door from paint involves the use of industrial hair dryer and spatula.
Order of work:
- Turn on the hair dryer in the power grid.
- Direct the stream of hot air to the door section.
- When heating, the paint will begin to swell and fall behind, and it will be easier to consider the spatula.
- The processing process is repeated in the following zone.
After the entire door is processed, you need to modify the missed fragments. The surface is impeded by sandpaper.
If there is no industrial hair dryer, you can use the iron, pre-laying between the sole device and the foil door.
The advantages of the method:
- environmental friendliness;
- not needed extensive experience.
Disadvantages:
- it is necessary to apply a special tool;
- it is not always possible to use on complex surfaces;
- there is a possibility of damage to the tree with incorrect setting of temperature regime;
- release may be required.
How to clean the surface with a mechanical way?
A mechanical method involves removing the paint layer using tools: from a conventional spatula to a drill with nozzles and other special equipment. The use of an electrical tool speeds up the process, but may not cope with complex places.
Method disadvantages:
- dust formation;
- high probability of physical surface damage;
- need a tool;
- the need to apply protection tools.
Advantages:
- environmental friendliness;
- the presence of a good tool speeds up the process.
As a suitable tool for removing paint coating, you can use:
Removing a multilayer coating with the use of only emery paper or a spatula is time consuming and inefficient.
The best solution solution is the choice of a chemical method or the use of power tools.
How to rain chemicals?
Washing in a chemical method is carried out using solvents. The technology is based on the destruction of chemicals of the structure of the dye itself:
- The solution is applied to the surface with a brush.
- Withstand the desired time, which depends on the composition and type of paint.
- Acting a spatula or scraper, coverage swollen under the influence of reagents.
- Choose paint residues.
If the inspection instructions state that the surface needs additional wi-alcohol ratio or other solvent, it must be done.
The advantages of the method:
- the speed of the chemical composition;
- simplicity;
- no appropriate application is required;
- no special skills are required.
Disadvantages:
- toxicity of chemicals;
- an allergic reaction is possible;
- mandatory availability of personal protective equipment;
- the need to organize good ventilation in the process of applying funds;
- caustic odor
- solvents require special disposal.
Despite its high efficiency, the use of chemicals often requires surface finalization by mechanical manner.
Before using the solvent, it is important to clarify whether it is suitable for a specific type of paint, and whether the state of wood allows this method of cleaning.
Selection of reagent must take into account the tree breed and material condition. Digging wood may not withstand intensive chemical impact.
How not to damage the door leaf?
The wooden surface has a characteristic texture, is distinguished by susceptibility to hard mechanical exposure.
When working with natural material, such moments should be taken into account:
In addition to refreshing paint, attention should be paid to the condition of the fittings. If necessary, replace or renovate elements from metal.
Cleaning Tips:
- Works must be carried out using personal protective equipment.
- Removable parts of wooden fittings, such as door handles, convenient to process separately.
- If the door is removed, then it is desirable to remove it before cleaning and putting horizontally - it will be more convenient to carry out work.
- For heat treatment it is impossible to use open fire - only hot air.
- After cleaning, the defects of the wooden surface, to the coating of the new paint, should be eliminated - grinding, putty.
- Before the new painting, the tree should be projected.
- The use of stacks for paint and sanding can be recommended only with a thin layer of wood coating.
- Grinding work on the tree with electric tool is recommended on the street. This will reduce the likelihood of touching the working part of the equipment a foreign object.
- When used for cleaning chemicals, you should not use the plastic packaging - the solvent can "Dange".
A hurry when removing paint is inappropriate, as it can lead to damage to wood and injury.
Video on the topic
How to remove old paint with wooden door, video instructions:
Conclusion
Cleaning the wooden door from the old paint is the process of time consuming, requiring time and thoughtful approach to achieve the goal. But even those who have no experience and special training have done to cope with the task.
Wooden doors not only look solid, but also has high thermal insulation, protect against noise. Models from expensive wood are pleasing to strength, serve for a long time, do not require special care. As it is exploited, the appearance of a wooden door is worse, how to remove the old paint, you are interested in the owners of apartments and houses that they want to update the interior slightly, because there are not enough money to the overhaul, the purchase of expensive products.
Before cleaning the door leaf, it is necessary to determine which composition used to be applied to the surface, but there are layers. In paints, chemicals are contained. In case of incompatibility of materials, the new coating will be uneven, appears, chips appear. Finding out all moments, you can correctly choose a reagent that can easily remove the old paint.
There are several methods for removing the coating, sometimes you have to combine them with each other. After removing the varnish, it is necessary to walk on the surface of the sandpaper, shock cracks.
How to clean the door from old paint
Having determined the type of means applied to the door cloth, choose the method of removing it, given the number of layers. Before starting to work, reserves tools in the form:
- scraper;
- spatula;
- drill;
- hair dryer.
To remove dust, the vehicle will be required, the door is covered with a film or wrapped with scotch.
To make the smallest wood or varnish particles, do not get into the eyes, put on glasses. The respiratory tract is protected by a respirator.
Chemical method
The easiest option that allows you to remove the old paint, does not require special equipment, electricity costs. The solvent is treated with a cracked coating. The chemical substance destroys the paint molecules, and it is easily lagging behind the surface of the canvas. When choosing a reagent, it is necessary to take into account the wood breed from which the door is made.
Mechanical method
Clean the cracked coating can be used without chemicals. The old paint is facilitated by the staple, when she will drop, remove the scraper. With a mechanical method, the surface of the door leaf does not need to wet water, and you need to perform sharp movements, trying to avoid the appearance of traces on the tree from the acute spatula.
The paint that keeps firmly remove the drill or a grinder, and deposited in several layers by grinding. The brushes are not recommended as an electrical tool tool, the wire scratches wood, and after cleaning the coating, the surface of the canvas has to be used. The mechanical method is not suitable for removing paint on the uneven door, the material cannot be removed from the joints and recesses, it will remain there.
Thermal method
Sealing paint can be heated, but the effect of exposure must be selected, taking into account the type of wood, so as not to destroy the structure of the material. The thermal method allows you to cope with the solar coating that is not cleaned by the scraper. For heating use:
- construction hairdryer;
- soldering or infrared lamp;
- gas burner.
Sandblasting, in which the paint under the pressure of air and the use of sand is divided into small particles, and the canvas is not damaged, it is not performed at home. Expensive equipment applied only by specialists.
Warms of washes
The best paint is removed by the special compositions that come into reaction with it. The canvas softened, but on the structure of the tree neither universal nor specialty washings act. The first tools are suitable for removing different materials, the basis of which is water or solvent. For cleaning certain varnishes and paints, special washes are produced. They contain substances affecting the structure of a particular coating.
Powder
Means for removing paints and varnishes are available in different form. Under the consistency of the washes are liquid, which are well cleans the surfaces decorated with thread. Lucky cope with several layers of cracked old material. Dry flush acts more efficiently, suitable for cleaning a large area, evenly lies with the addition of water.
Paste
In order not to dilute the powder with a liquid to obtain the desired consistency, you can purchase a ready-made tool in the construction store. Work is performed in stages:
- The composition is applied to the surface with a conventional tassel.
- The door is wrapped with a polyethylene film for 3 or 4 hours.
- The paint is cleaned with a dotted spatula, without pressing the tool.
- Water is connected to a vinegar in proportion to 5 to 1 and remove the remains of the paste.
With the help of washes, 8-10 layers of varnish or paint are removed. The paste can be independently made from caustic soda. The means is dissolved in water, oatmeal is added.
Gel
On horizontal and vertical surfaces of different thickness to remove paint, it is convenient to apply funds with a jelly-like consistency. One of the inexpensive but efficient "Prestige" gels does not require mixing or blasting before applying. The washes is applied to the paint with a layer of 3 mm. After 3-5 minutes, the material is considered a spatula.
Removes polyurethane, acrylic, epoxy coatings SYNTILOR LIGHT gel, acts very quickly, flushes enamel from wooden surfaces, water-mounted paint. The tool penetrates into the deep layers of varnish, softening them. In the gel there are no acids, the composition is applied using a roller or brushes with a layer of 1 mm.
Special fluids
To remove paint on wooden surfaces, on which there are many small parts or elements of the thread, instead of pasta or powdered washts, advise the use of liquid reagents.
The substances purify wood from varnishes and paints on a polyurethane, oil, epoxy basis.
Before applying the composition, dust and pollution wipe on the door, metal parts are closed and cleaning:
- The reagent is gaining to the brush and distribute over the surface.
- Waters are wrapped with polyethylene and leave for the time specified in the instructions for the liquid.
- The paint is fitted with a spatula and take carefully removed.
When using washes, it is impossible to ignore safety equipment, since they contain jet substances. After removal of the old coating, wood is wiping with vinegar with vinegar, soaked, treated with varnish, color.
Features of the cleaning of the metal door
Wasters and reagents allow you to remove cracked enamel, oil, acrylic, epoxy paint not only from wooden surfaces, but also clean the metal doors from different materials. The design must first be removed from the loops, unscrew the decorative lining and accessories, pull the glass inserts. Proceed with reagents better in air. In order for the paint lagging behind without the use of force, it is heated by a construction hairdryer, lubricate kerosene, and only then remove the spatula, grind the sandpaper.
With cracked old layers, the grinding machine copes well. The tool is installed a nozzle on which the average spraying. Applying a construction hairdryer, a fusing coating by the effect of hot air, you need to follow the metal to overheat. When bubbles are formed on the material, purified by a spatula. Thermopystole or solder lamp quickly melts the paint, the remains of the substance are removed with a metal brush. Cracks or chips formed after removing the old coating are close to putty.
Before applying a new composition, the canvas are grinding.
Metal doors are purified by any of three ways, with a mechanical method, the product is sometimes damaged, the thermal option is hazardous to human health. The use of washes and solvents allows you to quickly remove the coating without applying special efforts.
Possible problems
Often it is often unable to remove all the layers of the old coating and the cleaning has to start repeatedly. When using a mechanical method on a wooden canvase, cracks are formed. They need to be smeared with putty, handle the primer. Paint poorly behind, if dust on the surface of the dawn, there are dirty stains. Before cleaning the door must be wiped. When heating with a hairdryer at temperatures above the maximum possible values, the tree darkens, dries and cracks.
It is possible to remove the thin layer of material on a small surface without tools, you just need to lose the web with a metal brush, sanding sandpaper. You can not keep a wash in the plastic packaging, the composition corps the container. When the open fire is heated, bubbles are quickly formed on the paint, but the tree often dries, and even burns. Builders do not recommend using chemical reactivities, hairdryer, when there are elements from plastic, which cannot be removed.
They do not advise heating the surface in places where the wiring is laid, it is fraught with short circuit. In some cases, there is no need to clean the coating, and a new layer is applied to the old layer. Before this, the coating is grinning, smoothed the tubercles, washed with an alkaline solution, soaked. Both enamel, and oil, and acrylic paint must be removed if they want to get the effect of translucent wood.
Sometimes, after repair work, you need to replace or update interior doors, but some people have no opportunity to purchase new or do not want to throw out old ones. Constructions can be performed from a solid array, be carved, present value. Then the question rises how to remove the old paint from the door to further update and enter it into the interior of the room.
Cleaning door cavulsions from the old coating will require effort, especially if several layers of paints and varnishes were applied. After performing this time-consuming task, the result of the application of the new coating will surely please the owners - give the design updated view.
If you neglect this stage of updates, the result may be unpleasant to surprise. A new coating will be blown unevenly, repeat all the leaks, cracks. All paints and varnish materials consist of chemicals, therefore it is not known which reaction to expect when the interaction of two dyes in the composition of different products. The layers can appear, and the color will not be as expected.
Deciding on an independent removal of an old painted layer, you need to determine the most appropriate method of working. The choice of the method directly depends on the material of the door canvase. Tree, plywood, pressed sawdust or metal require different approach. Methods applicable when removing the painted layer from the metal, are not at all suitable for wood.
Getting Started to remove the paintwork, take into account such parameters:
- frame material;
- the number of dry layers;
- the view of the previously used paints and varnishes.
Given all these moments, it will be possible to determine the most appropriate reagent or tool to remove the painting base with less effort. In addition to the work on the removal of old paint with wooden doors, the surface stripping is carried out, cloth close up. Before holding any manipulation, it is desirable to remove the design with loops.
Only after the preparatory work, you can proceed to apply new paint.
Methods for removing paint with doors depending on the material
To decide how to remove the old paint from the door at home, you need to determine the most appropriate cleaning method.
Three types are distinguished:
- chemical - the use of chemicals;
- mechanical (instrumental);
- thermal - exposure to high temperature.
Sometimes, two ways must be combined for better work.
Chemical method
The chemical removal method is the most convenient and takes little time. This is the method without the use of special equipment, electricity. Suitable for removing heat-resistant coatings that are not heated.
To select the correct type of chemical reagent, you need to know which material was previously used. Pick a special "washout" will help the consultant of the construction supermarket. Before its use, it is necessary to study the instructions, as well as secure the means of individual protection. When working with toxic solvents, you will need a respirator - be sure to use gloves, safety glasses.
What solvents are used?
For convenience, "washes" are produced in different forms. This allows them to apply them on any surface:
- liquid reagents;
- paste;
- jelly;
- dry mixes for the preparation of solutions.
The following types of solvents are used to dissolve the paints and varnish coatings:
- based on White Spirit for dissolving oil, nitrocellulose, pentafaline paints and varnishes with a board surface;
- tools based on caustic soda or alkali eating (dissolve acrylic and water-emulsion paints).
Before processing with a reagent, the surface should be cleaned of contamination. The substance is applied for about 30 minutes, then the softened layer is removed by an iron spatula. If necessary, the procedure is repeated until the dyed layer is completely removed.
Mechanical method
Before deciding how it is better to clean the wooden door from the old paint mechanically, you need to get the necessary equipment. Mechanical processing and DVP will require great effort than using "washing".
Delete dry layers can be manually: sandpaper, spatula, brushed metal. A lot of time and strength is spent on such work. It is easier to do this with the help of electrical tools that can be rented in a construction store, familiar.
With the help of a knife with a spatula, paint is well removed in hard-to-reach places. Then, the canvas is treated with coarse emery paper.
Precautions
Delete paint from the door leaf with a mechanical way better on the street. When processing with tools, dust is formed, so the surface is recommended to clean a little, moisten with ordinary water. In order not to breathe dust, you need to stock up with a respirator or a mask.
For mechanical cleaning, you can use a piece of glass. You need to be very careful not to hurt and damage the wooden surface (it is recommended to wear thick protective gloves). Remove unnecessary layers follows wooden fibers.
Thermal method
The thermal method of removing the old dye is the heating of the layers to their softening. Since there are high temperatures when working, this method is not suitable for flammable materials by type of plywood. Working with a wooden door, you need to choose the appropriate temperature mode.
Expensive accessories, decorations, glass before carrying out all the works are removed so that they do not melt or damaged in another way. The surface is purified from dirt, dust, garbage. Take paint at that moment when she softens and go bubbles
Important! Using the heating method, you need to be careful not to burn about the hot surface, especially if the metal door is processed.
The thermal heating is better to carry out outdoors, in order to avoid the appearance of the caustic chemical smell and toxic volatile substances.
Tools for work
The following tools are used to heat the painted surface:
- thermopystole (melts paint - it is easier to remove with a knife, brush);
- hair dryer (construction) - used for wood, can be used indoors, the temperature regime is adjustable;
- burner on gas;
- blowtorch;
- iron with foil.
The mechanical method of purification, except sanding, spatula, knife, metal brushes, provides for the use of such power tools:
- bulgarian equipped with a grinding nozzle;
- sander;
- drill with metal brushed.
When chemical cleaning will need a spatula.
Having understood how to effectively clean the wooden door from the paint, you can proceed to the processing process. These methods will help to save on the acquisition of a new design and put the old one.
The simplest way to return an attractiveness to the old doors is to paint the cloth. The work is simple, but requires compliance with technology. Incorrectly prepared surface or bought inappropriate paintwork material will lead to the worst result. When painting wooden doors, it is desirable to lay the sash horizontally, which will avoid the formation of flutters.
The choice of compositions is huge. Traditional opaque Enamels and paints with oil base prefer if you need to hide the unsightly surface of the old door.
Coating transparent The composition allows you to save a textural tree pattern on a new web. Morilka refresh the color, give a suitable shade. An attractive look acquires wood covered with oil impregnation. To achieve the maximum effect, the processing of the door leaf blast is combined with staining with transparent varnish.
Paintwork materials are manufactured on aquatic and chemical basis. The composition has an aggressive solvent. In order not to poison toxic evaporation, work is performed in a well-ventilated room. Alkyd paints and varnishes have reinforced water repellent properties. It is better to apply them for staining of wooden entrance doors, as well as a bathroom, bathrooms and economic premises.
Based on water is manufactured. The consistency of the paint and varnish material is great for applying with a brush. The water base is not toxic. The compositions are ideal for staining interroom door blocks.
Instruments
The list of necessary tools depends on the type of work performed:
- For mechanical removal of the old paint, the scraper and sandpaper will be needed. You can accelerate the process with a grinder or drill with shlicking nozzles.
- With a chemical method of removal of an old coating, enamel washes are used. Additionally, there will be a lot of vet and personal protective equipment: glasses, gloves, gauze bandage or respirator.
- If the thermal method is selected, an electric thermal gun is used to remove the residues of dry paint.
- To cover the shield doors it is better to use the roller. The fillety doors apply paint paint perform by painting brush.
- The spatula will be needed if the shtlotka of the door leaf is assumed, and the grinders are used for final grinding.
After the preparation of the entire instrument and materials proceed to restoration work.
How to remove old paint with a wooden surface?
In order to paint the old wooden doors to paintively, first consider the coating that has come into disrete. Do clean it delicately so as not to break the surface of the door canvase. Special accuracy will need if you need to repaint a veneered wooden door. Veneer is very thin and afraid of mechanical impacts. For the removal of old paint from wooden surfaces there are four common methods.
Mechanical
The most time-consuming and aggressive mechanical method is used when other ways to remove the paint from the wooden surface did not bring a positive result. Veneered doors are not subjected to such cleaning. Mechanically usually remove strong nitrocracies and alkyd enamels. Solded places are cleaned with a scraper or spatula. The paint appeared to remove the grinding, grinder or drill with grinding nozzles. Sand papers are difficult to rub. It is usually used if there is no power tool.
Applications sandblasting
The mechanical method of cleaning includes the use of sandblasting. A high pressure air from the compressor is mixed with dry particles of sand and strengthened the jet breaks the old paint. Sandblast is easy to remove lacquer or enamel with a wooden door in a few minutes, but it is important not to overdo it. Heat strokes are crushed together with paint wood. If you stay in one place for a long time, the surface will be corrupted. For removing the thin layer of paint use fine abrasive: river sand or soda.
Heat treatment
Shield and Filöncutoy door are subject to heat treatment. For a safe method of paint removal, a heat gun or a construction hairdryer operating from electricity is used. An old coating when heated acquires a soft structure, an easy scraping scraper. Professionals use gas burners, but with such a tool work carefully. Open source of fire along with paint can burn wood.
Chemical method
To remove paint with the doors with a chemical method, solutions are used, softening most of the types of enamel and varnishes. Work is performed in a well-ventilated room using personal protective equipment. The method is suitable for a veneered door canvase, but first need to be found in the instructions, whether the solution is safe for veneer.
To clean the wooden door from the old paint, it is enough to lubricate it with a chemical preparation. After 5-10 minutes, the coating will rise by bubbles, easily removed by the scraper.
Surface preparation
The quality of painting depends on the proper preparation of the product. The process is from the following actions:
How to paint a wooden door right?
Deciding to paint the wooden doors with your own hands, you must not forget about the box. It will be strange to look a design, which has a different color of the frame and sash. Prepare the wooden door to painting in two ways:
- The door canvas are removed from the loops and laid horizontally on a flat table or stools. Cleaning, as well as staining of the sash and the box is performed separately.
- The door leaf remains hanging on the hinges. After cleaning the sash and the box, it is fixed by wedges in the open state at the time of painting.
Of the two options, paint on the home wooden door is better with a removed sash. On the horizontally laid canvase, the flows will not appear, and to clean the old coating is much easier. If the fittings are non-removable, use the second option.
Coloring in the usual way
Under the usual method of staining is meant to paint the wooden door into white or give any other shade without an artificial effect. For operation use opaque enamel. Roller and painting brush are pre-prepared, removing pouring bristles with vile.
The process of staining in the usual way depends on the design of the door block:
- Shield The wooden door is painted with roller. First, the paint is applied to the ends of the sash. Next, the roller is rolled from the left corner of the top of the canvas to the right, and so along the entire surface. After drying the first layer, the flap is painted in the longitudinal direction. The second layer is given time to dry. In the final repeat the color of the ends and the canvas from the top corner from left to right.
- Wooden Filöncatoy The door is painted by a painting brush. First cover the ends of the sash, curly protrusions and depressions. Further painting of the surface of the web occurs according to the scheme used for the panel door.
If the door block must be done with effect under ancient Apply a concentrated simulator without coloring enzymes. The solution during the impregnation burns wood, giving it a gray brown color. Shades are changed by adjusting the concentration of the veil.
With ordinary staining with aqueous vehicle, the door canvas first moisturize. Sash can not even shoot. So that there are no waste, dye begin upwards. The first layer of the verse goes along the fibers, the second is across, the third is again along the fibers.
Morilka staining on water base slightly lifts wood fibers. After drying the third layer, the surface of the sash is grinding, remove dust and again paint once. Alcohol Morilka does not raise fibers. The need for grinding the canvas disappears.
Wood imitation
To beautifully paint the wooden or MDF door, two opaque enamels are used on the same basis, but with a light and dark tint. It is optimally combined yellow, beige or gray with brown. First, the door leaf is painted with a light tone. After drying, the product is treated with soap. From above apply a layer of brown paint. In the final, soap wash off with water until the canvas acquire an old look.
To decorate a wooden or veneered door, the surface pass the brush. After the advent of soft fibers of the veneer, the imitation of wood texture is evoked. One or two layers of paint are applied to the door, and after drying there are grinders.
How to cover lacquer wooden door?
Opaque enamel completely hide the color and texture of wood. To preserve the natural texture, you can paint the door with varnishes on an alkyd, acrylic or other basis.
Transparent coating is optimally suitable for the new web. Hide defects on old wood will help the verse. After impregnation of the surface, two layers of transparent varnish are applied in different directions. Dissolia is removed more time than enamel requires. Moreover, each layer must dry.
With the help of the veil, you can paint the wooden doors in the color of Wenge, and to open them with a varnish. Sometimes practicing firing. Gas burner will help to achieve the color of Wenge. Open flaming wood burns to a dark brown shade. After grinding, even a pine board on a texture from wenge is not distinguished. The finished canvas is treated with a protective impregnation, and after drying it is covered with transparent varnish.
Staining a wooden door with any paintwork available at home. It is only necessary to accurately comply with technology.
Objects with age have a special charm. If you have an old door of a tree, but it has gotten paint, It is very easy to give her a new life. It seems to be digging, if you can easily purchase a new one: at the points of sale of building and finishing goods it is proposed a wide range. But is it necessary to change the goodwood wood door to a modern product from thin wood fiber panels of medium density, hollow in the middle and trimmed with a laminate coating, even under Milan Walnut? The existing product can be renovated with your own hands. First you need to remove paint with wood doors.
Remove the paint kakya already outdated
Why repair the door?
Before viewing how to remove paint with doors and select the best option, let's understand, but for what to spend time and strength.
- Old wood doors Have high quality. They are made of an array, quite often the material for production served oak, even if the sash is covered with paint.
- Original old door canvas. In the old planning apartments often stand old doors, High, bipoly, viper. In the store there are not purchased, and the manufacture of under the order will cost expensive.
- The door is beautiful. If you are fortunate enough - and you are the owner of a richly decorated carving of the door of the door, throw it on the garbage will be blasphemy.
- Art object. If you are a creative person who can create the creation of decorative and applied arts, then the wood sash is a wonderful field for art.
Of the items described above, it is clear that there are many reasons for reconstruction and repair, and you can have your own.
Materials
In theory there are three ways to free from outdated paint:
- Thermal. Thermal method is built on heating outdated paint Before softening.
- Mechanical. The coating is removed using different scrapers, sandwich. You can do work in manual or using an electrical tool.
- Chemical. Paint Recorded with chemicals, softened and cleaned.
In theory, everything is simple, but here, as the practice has shown, it is very often necessary to use all three ways, due to the fact that chemistry dissolves not all variations of paintwork coatings, heating is not possible to remove the layer in the depressions, and the mechanical method, even with the help of an electrical tool, is very Complex and dusty process. Due to this, you do not need to hope for any one option. It is better to stock up as much as much as much as possible the number of devices and means.
To perform a plan for onowing the doors, you will need to stock by some devices and patience, due to the fact that, faster, quickly remove the paint, which is already outdated with wood doorsEven after looking at the video detailed instructions, it will not work out.
Instruments
Room Hairdryer - Very necessary thing for shooting outdated paint. It looks and functions, it is practically as traditional for drying hair. But the air temperature produces from 100 to 600 ° C. Thanks to this, please contact him in order not to get burns, and in no case apply instead of the hairdresser's hair dryer. Conversely: if there is no construction dryer, then try to use ordinary, to lay the hair, is not worth it. Results will not achieve.
Apart from the hair dryer, you can also apply other processing options in a thermal method: a lamp for a soldering or atmospheric burner. These tools insist on special caution in circulation. You can easily overload the plot, and damage not only paint, but also the tree itself. In addition, these devices have an open fire, due to this, follow the safety regulations. Even for heating the coating use infrared lamp.
The cycle is a scraper having a metal blade and a handle. If a specialized scraper failed to acquire a spatula, or any other identical tool.
It will take grinding paper with a wide variety of grain. Apart from paper, most practical specialized abrasive sponges, especially if there are reliefs on the surface, for example, thread. Perfectly, if you have a machine for grinding work - the use of its essential process makes it faster.
It can be manual or in the form of a drill nozzle. You may also need one another option. Drill nozzles are in the form of a disc or cup.
- brushes and brushes;
- paint removal tool;
- means of protection;
Apron or clothing, which is not sorry to damage, gloves are ordinary, fabric and rubber, respirator, glasses. You do not need to neglect the use of protective equipment: You wish to remove paint from iron or wood doors, not the skin from your own hands.
Consumables
Rafting for removing dust, polymer ethylene to protect furniture and other items, tape - it is immediately difficult to say, for which it can come in handy, but what is useful for something is a fact.
There are different washes for sale for outdated paint. Try to determine the type of paintwork material and select the appropriate chemistry.
We start to work
The work is to be quite contaminated, and in the process, no matter how the method is not cleaned the coating, quite bad smells occur. If you plan to make the room in the room, close the room with a film to protect and need to check whether there is a chance to air the room.
Start the recovery process outdated paint With the use of a construction dryer. In many models there is a temperature adjustment - it must be selected by an experimental way. Hair dryer is often completed by additional nozzles. Among them there is a scraper nozzle, it allows not only to send a jet of hot air, but at the same time scrape the softened paint.
Where the coating with a hair dryer is unrealistic to delete, use other options.
When the coating for the most part is removed, the surface of the door of the door is additionally discharged with a skin to remove the preserved areas of the coating and the scraper jackets.
Remove dust and view the surface. Perhaps in certain places you need to put shortcomings. Before filling the chips and dents, browse the door to decide - paint a new paint, or in case of a good preservation of a tree, maybe decide that the lacquer coating will add a bigger charm.
Now you know how to remove the paint Kotraya is already outdated with doors. The coating that is already outdated is removed and proceed to the planned facing.