How to quickly pump up a pvc boat with a car compressor. How to choose a pump for an inflatable boat. Advantages and disadvantages of electric pumps

Summer ... So you want to rush somewhere into nature, enjoy the open air by the reservoir, fry barbecue, sunbathe, play volleyball or just go fishing with friends. There would be cars, there would be a desire, but there will always be a place to rest. But, one way or another, today it is difficult to imagine outdoor recreation without an inflatable mattress (a very popular product for a beach holiday), an inflatable boat, an inflatable pool for children, etc. All this should be in the arsenal of a modern summer resident or tourist.

An inflatable boat, for example, today is perhaps the best watercraft for those who love fishing. However, such a boat is required: a) to assemble and b) to inflate. Alas, if an inflatable boat has low pressure, then it naturally loses its qualities. Therefore, there should always be a booster pump at hand. As a rule, pumps are included in the set for inflatable products, but they are very simple, it will not be easy to pump up a boat or a mattress with them and will take a lot of time. There are, of course, a large number of different pumps on the market: hand, foot, electric. However, choosing a durable pump that is convenient and, moreover, inflates a boat of any size quickly enough is not a trivial task. Or maybe there is a way to pump up the boat without buying a pump for it at all? It turns out there is - you can use a car compressor!

Agree, it is difficult to imagine the owner of an inflatable boat without a car. So why not take advantage of this already available powerful enough pump? Of course, this device is designed to inflate car tires - it just won't work to adapt it to a boat (at least for purely geometric reasons). We need some kind of adapter, adapter. You can, of course, try to make it yourself (there are such craftsmen), but it is still more correct when there is (and is successfully used) a special nozzle for pumping inflatable products. Not only boats, but, of course, any other inflatable products.

The BERKUT brand, known for its legendary car compressors, has presented a unique adapter under the VT-300 article number. This device is based on the Venturi tube technology, named after the Italian scientist. The principle of operation is simple - the pressure of the air flow from the compressor decreases due to the passage of the narrowed section of the pipe. And productivity (volume of supplied air) is increased due to a special coupled air duct. The BERKUT VT-300 adapter is connected to the compressor hose by means of a threaded connection and can be used together with nozzles designed for inflating and, of course, pumping out air from inflatable boats, mattresses, swimming pools and all other products that require a sufficiently large volume of air.

BERKUT brand adapter easy to use. First, you need to select a nozzle (one of three in the kit) for pumping air, then connect it to the desired inlet, insert it into the desired product (for example, into the air valve of an inflatable boat) and start pumping.

If the inflatable product, by means of the VT-300 nozzle, is not inflated to the required pressure level, then you can close the air duct (pumping outlet) with your finger in order to increase the air pressure. Keep in mind, however, that holding (plugging) the outlet for a long time may cause pumping. So you need to take precautions!

The boat pump is a very useful device that greatly facilitates the process of inflating the product. In some cases, people prefer general purpose models or car pumps. But there are a number of advantages in using a device assembled specifically for a boat.

Specialized equipment always has a number of advantages over conventional equipment, whether it is an electric pump for a boat or something else. The main criterion is device performance... The compressor power is calculated taking into account the parameter of the rubber product, so there should be no problems during operation.

Many people ask the question, why buy a specialized device if you can pump up a PVC boat with a car compressor with your own hands? Of course, it is possible to pump up the boat, but this will pose a number of difficulties. A car pump is not designed to pump such volumes of air, therefore, it will take a very long time to completely fill the PVC product with air. Not everyone is ready to spend so much time waiting, sitting on the banks of the river. In addition, in most cases an adapter may be required to inflate the boat with an automobile compressor.

Types of pumps

PVC boat pumps are divided into two categories. Models capable of creating low pressure, as well as medium and high.

Low pressure type provides a relatively rapid inflation of air, but this pressure is kept for a relatively short time, and it is not enough to bring the boat into an operational state. Most often, for pumping it is necessary to resort to using a foot pump.
Medium and high pressure... Models that pump medium and high pressure are able to pump up the boat as quickly as possible. They do not require additional swapping devices. Another significant advantage is the complete autonomy of the process without human intervention. It is enough to plug the device into an outlet and turn on the button.

Also pumps are divided into hand, foot and electric... The latter are capable of providing high pressure in the shortest possible time. Basically, the pumps are selected depending on the size of the boat. Each manufacturer of PVC products equips its model with the simplest frog pump. But in order to pump up a boat with such an apparatus, you will have to make a lot of efforts. That is why many fishermen prefer to initially purchase a more productive model.

Foot and hand pumps

Everything is relatively simple here. If the method of inflating with the foot is the most preferable, then it remains to choose the model, suitable for the characteristics of the existing boat.

For a PVC boat no more than three meters, with a chamber volume of 5 liters and a pressure of 300 mbar.
For a boat with a length of three to four meters, chamber volume up to 6.5 liters and pressure up to 400 mbar.
For any PVC boat, whose length is from four meters, the allowable volume is 6.5 liters, and the pressure is 500 mbar.

Hand pumps for inflatable boats are usually distinguished only in two main parameters.

For boats of small length (up to 4 meters), double-acting, with a cylinder volume of 1.5 liters. The pressure is 500 mbar and the cylinder length is 410 mm.
For all other boats with a length of more than 4 meters, with a double action and a volume of 2.5 liters. The pressure in this case is 600 mbar, the cylinder is 510 mm long.

Manual pump

The convenience of using hand and foot pumps for pumping up a boat is rather dubious, but they do not need power supply, and they can be used in any, even the most remote places. In addition, they are lightweight and compact.

Electric pumps

An electric boat pump is the most convenient and functional solution. To use it, you only need a power supply. There are two options here.

Also, electric pumps are divided according to the principle of operation into centrifugal and piston... The first of them provide a pressure level of up to 200 mbar, and models with a piston principle of operation - up to 800 mbar.

There are several simple rules, adhering to which, it will be possible to purchase a model that will fit exactly the existing PVC boat.

It is necessary to choose models with the highest degree of protection of the case... This is very important if the device will be used in extreme conditions.
When choosing a model, it is necessary to be guided by reasonable principles; you should not choose what is obviously cheaper or more expensive. Often, the question does not depend on the price, but on the parameters of the existing PVC product. In the case of an electric pump, it is necessary to take into account that its performance strictly corresponds to the parameters of the boat.
It is not worth buying a "no-name" model, which does not even have the name of the manufacturer, but only the index. The best thing give preference to well-known brands well-established in the market.
It is important that the diaphragm pump is dominated by metal elements- this will significantly extend its service life.
A significant advantage will be the availability of the pump pressure sensor, as well as a regulator.

Review of the best pump models for a boat

Here are 5 models that have earned positive reviews from many fishing enthusiasts. The mini-rating includes both manual and electric models (mains and battery) - everyone can choose a product to their liking.

The fifth line is hand pump from the well-known manufacturer Intex. This model is intended primarily for those who prefer to travel light. It is simple and convenient to work with such a pump, and most importantly, after prolonged pumping, the palms do not hurt at all. The body is made in black, with no choice. Manufacturing material strong and durable plastic... For hand pumps, the last point is not a minus, because they lack an automated blower. On the contrary, the plastic case is much lighter and, therefore, more convenient to transport.

The device perfectly copes with the pumping of any PVC products. The set includes a set of various nipples and nozzles for connecting to various objects. The cost of the device is 528 rubles. In addition to a set of nozzles, the pump comes with a durable corrugated hose.

inexpensive;
easy to use;
reliable;
takes up little space;
proven manufacturer;
various attachments included;
stylish appearance.

low productivity;
it will not be possible to pump up a large boat without a low pressure supercharger;
short corrugated hose included.

4. Bestway

When looking for which pump to buy, you should pay attention to the model from Bestway. This is a wonderful device from a Chinese brand. The company has been present on the market for a long time and has positive feedback on its products. The device is offered in large retail chains at a price of 1299 rubles. Very competitive price for an electric pump considering competing models. A distinctive feature of this device is work from a 220 V network. You just need to plug it into an outlet and wait for the result. The pump will handle any PVC product: boat, pool, mattress. The device is small and easy to transport.

Electric pump Bestway 62097

Important! The scope of delivery contains only the unit itself and the hose. The adapter kit is available for purchase separately.

A great solution for those who have in stock big boat requiring a powerful compressor at hand. The model weighs only 441 grams. A pump proven by time and users.

high performance;
long warranty period;
famous brand;
reliability;
sturdy body;
small size;
convenient to transport;
light.

works only from the network;
no adapters included;
noisy.

3. STERMAY

The three leaders are opened by the well-known manufacturer "Stermey". This PVC boat pump is widely popular with fishermen. First of all, the model is purchased for a good combination of cost and performance. You can buy a model for only 4940 rubles. The main advantage of this unit is battery operation... In the kit you can find special tweezers (crocodiles), with which the device is connected to the battery. This is very convenient when there is no place to plug into an outlet.

Electric high pressure STERMAY pump with crocodiles, 12 V

The device is capable of pumping up to 230 liters per minute. The maximum working pressure is 1.37 bar. Time of continuous work no more than 15 minutes.

Advice! For the indicated period, the device is able to drain the battery, so you should take care of the replaceable one.

Device made of plastic and operates from a voltage of 12 V. The number of stages of the intensity of the pumping is equal to two. A very good device that can be used far from civilization. Indispensable for everyone who is fond of fishing on the water.

high performance;
battery operation;
optimal pressure in the system;
two stages of injection;
famous manufacturer;
15 minutes of continuous work;
the voltage is 12V.

no pressure sensor;
plastic case;
strong vibration and hum.

2.GP-80

One of the most popular boat pumps today. The GP-80 is rarely found on the market just because it is bought very often. The average cost is 6362 rubles. This is a battery supercharger, which comes with special "crocodiles" for connecting to the "plus" and "minus" of the battery. Also supplied with the pump durable corrugated hose and as many as eight nozzles for different types of boat nipples. The weight of the device is 3 kg. The model is made of impact-resistant plastic in a bright yellow color. A feature of the device, like the model above, is battery operation... This makes exploitation in nature possible.

reliability;
high performance;
sturdy body;
small size;
battery operation;
operating voltage 12 V;
light weight.

drains the battery quickly;
loud noise during work;
missing sensor.

The best pump of today's top 5, the Bravo bp12 model, the best choice in the middle price category. The cost of the device is only 4195 rubles. It is a robust and reliable unit capable of build up pressure up to 1000 mbar... This indicator is a decisive criterion, because for most modern boats, this pressure is enough in excess. Importantly, the device is equipped with air evacuation function... The weight of the device is only 1.7 kg, it is very convenient to take it with you on the boat. Thanks to the "crocodiles" included in the kit, the pump can be powered from almost any 12 V battery. The maximum current consumption is 20A, which is quite a standard figure for most electric pumps.

pumps up the boat in 12-15 minutes;
the set includes an air hose;
detailed operating instructions;
light weight;
convenient dimensions;
very productive;
Italian production.

the battery runs out quickly;
hum when working;
the cost of the device.

Conclusion

It can be simple to choose a pump for a PVC boat, but for this it is necessary to take into account the parameters and criteria that were described above. To purchase the required model, you should know well the characteristics of the boat itself, as well as familiarize yourself with the nuances of operating the selected type of pump.

The purchase of an inflatable boat requires the purchase of a high-performance pump. This is due to the fact that it takes a lot of time to pump it up with a frog-type pump, which is included with the boat. As a rule, preference is given to an electric pump, which is powered by a car battery. Despite this, not every PVC boat owner is ready to buy an expensive item.

The choice of pump depends on various factors that can influence the selection process. First you need to decide on the purpose of the pump and its price. Before buying, it will not be superfluous to pay attention to the following characteristics of the model:

Acceptance of battery or car cigarette lighter operation. As a rule, centrifugal pumps are powered by a 12V vehicle electrical system. Higher performance designs connect to both the battery and the cigarette lighter. At the same time, there are models that work from a 220V network.
Boats up to 4 m long require an electric pump with a capacity of 300-400 liters per minute. Boats with a length of more than 4 meters require a pump with a capacity of up to 1000 liters per minute. The pump should provide a force of 300-400 mbar so that you do not have to pump up the floating craft with a hand pump, such as a "frog".
The presence of a check valve for pumping out air from cylinders. This function makes it possible to perfectly evacuate air from the boat, which makes it possible to fold the boat more tightly for transport.
The presence of a built-in pressure sensor, which allows the pump to operate in an autonomous mode. At the same time, there is no need to control the air pressure.
Built-in battery.

5 best electric pumps for pvc boats

Differs in the presence of a built-in power regulator, which expands its functionality. With the help of a pump, it is possible to pump not only boats, but also other structures. In eight minutes, he can inflate a four-meter boat to optimal pressure.

The user can independently select the working pressure. After pumping up the structure, the device itself is able to shut down, which will save, for example, the boat from excessive pressure. With its help, it is possible not only to pump, but also to pump out air. The pump kit is supplied with connectors for various valve designs, which allows pumping of various designs.

Device Specifications:

Supply voltage - 12 V.
Consumption current - up to 9 A.
Productivity - 150 l / min.
Working pressure - 300 mbar.
The weight of the structure is 1100g.

It is designed to obtain optimum pressure in air cylinders.

The package includes:

Hose for connection to the pump.
Electric cable with crocodile terminals.
A set of adapters for various valve designs.
The fitting that connects the air hose to the compressor.
Built-in pressure control regulator.
Transport bag with the required number of compartments.

To pump up the structure you need:

Connect the air hose to the compressor and the pumped object.
Connect the electric pump to the battery by means of alligator clips, observing the polarity.
Turn on the device by pressing the "ON" button.
Set the required pressure on the sensor.
After completing all the preparatory operations, the "START" button is pressed.

To evacuate air from the boat, you must switch the air supply hose to another pipe labeled "IN". All subsequent actions are the same as when inflating the boat. The body of the device is not protected against moisture penetration, therefore, being near a pond, you need to be careful enough so that moisture does not get on the device.

Technical characteristics of the electric pump:

The maximum generated pressure is 250 mbar.
Productivity - 1000 liters.
The consumed current is 45-60 A.
Supply voltage - 12 V.
Weight - 3.5 kg.

The pump model is designed for inflating large PVC inflatable boats.

The package includes:

Air tube
Alligator clip cable
Valve adapter kit
Housing-mounted pressure control indicator
Buttons for switching on and off the pump.
Transport bag.

The design consists of two separate blocks. The operation of the device begins with the launch of the first module. When the first module reaches the maximum working pressure, the second, more powerful module is activated. When the second unit is turned on, the pump becomes noisier.

If the device has not switched, then you should pay attention to the completeness of the battery charge and, if necessary, charge it. However, other reasons are also possible.

The boat is inflated as a result of the following steps:

Connect the air connection appropriately.
Connect the pump to the power supply.
Connect the pipe to the boat using the appropriate adapter.
The pressure regulator is set to the desired position, after which the "ON" button is pressed.

To evacuate air from the boat:

It is necessary to switch the air hose to the air evacuation branch.
Pumping is not carried out autonomously, so this process will have to be monitored.

Main technical characteristics:

The maximum working pressure is 800 mbar.
Supply voltage - 12 V.
Consumption current - 15-20 A.
The device weighs 1.9 kg.

This pump is suitable for inflating watercraft, with a working pressure of cylinders not exceeding 300 mbar. This is always noted in the boat's passport. The BRAVO BST 12 electric pump is designed on the basis of a two-stage compressor, which allows pumping other inflatable structures.

The set of the device includes:

Electric wire, up to 3 meters long, which can be connected to both the battery and the cigarette lighter, as well as a set of connectors for various valve designs.
Built-in pressure regulator.
Air hose.

Device characteristic:

Supply voltage - 12 V.
Consumption current - 15 A.
The maximum pressure is 300 mbar.
Productivity - 500 l / min.
The mass of the device is 1.5 kg.

With this model, you can quickly both pump up the boat and pump out the air from the cylinders. Able to work both from a 220 V network, and from a car's on-board network, with a voltage of 12 V.

The kit includes:

Pump.
Air tube with adapters.
Converter 220/12 V, as well as a socket for connecting to a cigarette lighter.
Warranty certificate.

The main characteristics of the model:

Manufacturer - Intex (China).
Power supply - 220/12 V.
Productivity - 600 l / min.
The maximum pressure is 800 mbar.
Weight - 3.5 kg.
Sizes - 260/160/110.

In order for the pump to please its owner with reliable and confident operation, the following recommendations should be observed:

Switch on the pump only after thoroughly checking all connections for reliability.
Work only with a fully charged battery.
The device must be installed on the same plane with the pumped object.
Do not leave the device in direct sunlight or frost.
Do not allow water to enter and avoid mechanical damage to the housing.
Do not bend the hose during operation.
It is not recommended to work continuously for 20 minutes or more.
Transport only in the case that comes with the device.

Depending on the pressure delivered at the outlet, electric pumps are divided into 3 categories:

Low pressure pumps (40 mbar). Suitable for pumping small boats. After preliminary inflation, the boat is pumped up with a mechanical pump (frog).
Medium pressure pumps (500 mbar). With their help, it is possible to pump air into boats up to 4 meters long, inclusive, without additional pumping.
High pressure pumps (800 mbar). They are used for inflating large inflatable watercraft, as well as for inflating boats with an Air deck.

Why do you need a high pressure pump (up to 800-1000 mbar)?

As mentioned above, such a pump serves to inflate more dimensional devices. Moreover, it has an impressive cost. It is better to choose a pump depending on the type of boat and its characteristics.

The advantage of the pumps is that a medium-sized boat can be pumped up in 10-15 minutes without much effort.

Plus to all of the above:

The presence of a pressure indicator allows you to keep under control the process of its work.
The presence of the reverse function makes it possible not only to quickly and efficiently pump the device, but also to quickly and efficiently pump out the air from it.
Models with a 220/12 V power supply allow you to save the battery and use it when it is not possible to connect to a 220 V.

Along with the advantages, disadvantages should be noted, which include:

The need for a power source.
The device is expensive.

For those who have not yet purchased an electric pump, it will be interesting to know:

It is recommended to purchase such devices only from well-known and trusted manufacturers.
A pump is selected based on the volume of its floating craft.
It is not bad if the design is equipped with a turbine piston supercharger.

In other words, the choice of a pump is preceded by various factors that, in one way or another, influence this process. The main factor that can be decisive is the financial factor. The more opportunities the angler has in terms of the availability of funds, the better the model can be purchased.

Moreover, the dependence on capabilities can be traced by the presence of a PVC boat, and most importantly, its size. Accordingly, the pump will also be purchased. Although many anglers still use the "frog" and only dream of an electric pump.

An adapter for a car pump for pumping a boat and other things.

It's a great idea to replace an expensive electric pump for boats with a car compressor, which most people always have in their cars. No more hauling two pumps, you just need a pump adapter adapter. One side fits most PVC boat valves, the other side fits the compressor.

Our online store site will help you choose all the accessories you need for your PVC inflatable boat

0 reviews for Car pump adapter for pumping a boat

Delivery

Dear customer!
The delivery service of our online store Tocamp is open seven days a week. And we are glad that you have chosen our store. We will deliver the goods within 1-3 working days from the moment the order is formed. Our managers will be happy to provide you with more detailed information about the delivery time.

The minimum order amount is 500 rubles.

Delivery in Moscow

Delivery cost within Moscow within the Moscow Ring Road 350 rubles.

When ordering for an amount over 10,000 rubles and weighing less than 10 kilograms, delivery will be free, within the Moscow Ring Road

If the order value is less than 1000 rubles, the delivery cost is 500 rubles.

Delivery across Russia

If you need to deliver goods to other cities in Russia, then there are several options.

1. You make an order, We confirm the availability of the product you have chosen, you make an advance payment from 20% to 100% of the order value, using the Sberbank BLITS transfer, transfer to our Sberbank card or in another agreed way, and we send the product you have chosen after receiving the funds By Russian post or EMS by Russian post. Upon receipt of the order, you will only have to pay the cost of postage, which you can calculate on the Russian Post website.
Our company guarantees that after receiving the money for the postage and the ordered product, we will send it to you within 1-3 days.
Our company guarantees that all ordered goods will be packed properly to ensure its integrity and safety. In the event that we are unable to send you the ordered goods, we undertake to send you the money back as soon as possible.

Sending oversized parcels is carried out only after prepayment!

You can track your parcel on the Russian Post website.

2. Delivery of goods by a transport company is carried out on condition of 100% prepayment.

Delivery to the Russian Post and to the transport company costs 200 rubles.

Delivery to the suburbs

Shipping cost is calculated according to the scheme 350 rub. + 30 rub. per kilometer.

Remember that the time spent on your visit to us can be much more expensive than shipping costs.

Pickup is possible.For pickup, you must be sure to make an order through the site where you indicate the required product, after which our manager will contact you and specify the pick-up time. The pick-up point is located at: Moscow, Pyatnitskoe highway 24 s 1

The presence of a water vehicle not only gives freedom of movement, but also allows you to create comfortable conditions for high-quality fishing. Today, there is a huge selection of floating aids on the fishing market, but the most popular are boats made of polyvinyl chloride (PVC).

Water vehicles made of PVC material have good performance characteristics: high strength, lightness, ease of use, high resistance to water.

To bring the boat into working condition, it is necessary to fill it with air, inflate it. As an aid, the manufacturers provided special devices - pumps. Among all the variety of devices, PVC electric pumps for boats have proven themselves well.

Contents

Advantages and disadvantages of electric pumps

The positive qualities of special devices operating from an electric power source include:

Speed. Unlike mechanical pumps, electrical devices make it possible to bring a two-seater floating craft into readiness in just 10 - 15 minutes.
Practicality. With the help of the device, you can not only fill the cylinders of the boat with air, but also inflate car tires, air mattresses and other rubber products.
Doesn't require physical effort, it is enough to connect the valves and the device is ready for operation.
The presence of a pressure gauge and reverse, which allows you to control the density of the air and not let it out back.
The ability to reverse cycle.
Built-in adapter. The electric motor can be powered from the mains, conserving the energy of the battery.

The negative aspects include:

Requirements for the electrical power supply. Typically, the requirements are for a car or stationary battery with a sufficient charge.
The cost of the appliance.

Given the wide range of models, it is quite possible to purchase a high-quality device at the best price.

Types of pumps

Electric units for inflatable boats made of PVC material are classified as follows, according to the pressure provision:

Low type, where in a relatively short period of time the PVC boat is inflated with air, but in most cases this pressure is not enough to bring the vessel into working condition. Additionally, foot pumps are used.
Medium and high type. Electrical devices providing medium and high pressure are able to pump up the boat as quickly and efficiently as possible without the use of auxiliary means. Another advantage of such a solution is the fully automated process of filling the cylinders of a floating craft; a person does not need to be constantly present and monitor the device. The main thing is to set up the unit to pump the required pressure and connect it to a power source.

Electric pumps for water products made of PVC - material can be of two types, depending on the type of power source:

Mains powered, which frees the owner from having control over the state of charge of the battery. But, at the same time, the use of a pump requires a power source;
Battery powered. Distinguish between external (removable) and internal batteries. Removable models have a spare battery. There are devices on the market for inflating inflatable boats powered by a car battery, which is very convenient.

Pump selection

When choosing a product with electric drives, you should pay attention to the following parameters:

Body material. Pumps are produced in a plastic case, but the inner metal filling is of priority importance.
The presence of two cameras. High-pressure electrical appliances are equipped with two chambers, since their design contains a diaphragm and a piston mechanism.
Pressure regulator (RD). The presence of the taxiway makes it possible to prevent the pumping of cylinders and to preserve the integrity of the walls of the vessel. Depending on the settings of the pressure regulator, the compress stops its work, reaching a certain point, without the participation of the owner.
Appliance performance. The best option for a reliable device is a model up to 450 mbar and a performance indicator of up to 500 l / min.
Reverse and non-return valve, which will significantly simplify the injection of air when inflating the boat, and its release from the compartments when assembling the vessel.
Power supply. Effectively purchase models with the ability to power from a network or mobile source.

Output: it is not advisable to use low-pressure units, it will not work to pump up a water vehicle of PVC material with high quality. And a poorly pumped water device is a danger to everyone on board.

Pump rating

To choose a high-quality electric pump for PVC boats, it is recommended that you familiarize yourself with the most popular models today:

This is a standard compact device with a removable 12 V battery, with a capacity of 150 l / min. The injection time of an inflatable boat 3.5 m long is 20 minutes. The advantage of the pump is the built-in pressure sensor. Cons: high noise figure, high the cost of the device is 4,000 rubles.

High pressure model, characterized by sufficient capacity of 1000 l / min, quiet operation. The compressor is capable of filling the compartments of a 4-meter boat in 4 minutes. The unit can be powered both from the electrical network and from an external battery. The device has a reverse and a taxiway. The price is fully justified by the quality - 10,000 rubles.

This is a standard two-piece model, equipped with a pressure regulator, removable accumulator, reverse. Advantages of the electric pump: light weight (1.5 kg), special storage case. Sufficiently good performance of the device allows you to pump up a floating craft with a length of 3.8 m in 4 minutes, 7.5 m in 15 minutes. The 800 mbar power is more suitable for large watercraft with inflatable bottom. The price of the product is 12,000 rubles.

The electric device is ideal for recreational fishing. Its working characteristics: productivity of 450 l / min, pressure regulator up to 300 mbar, autonomous operation of a removable battery is 15 minutes. Price RUB 7500

The pump from a Chinese manufacturer, adequately copes with the tasks of pumping and releasing air, differs in power of 195 W, capacity of 750 l / min. Excellent value for money and quality. The price of the model is 4000 rubles.

Pump operation

The operational life of the boat device can be extended by observing the following rules:

The device must be turned on after attaching to the boat valve and while the car engine is running. This setting will prevent uneven air distribution within the compartments.
The special device for inflating the boat must be installed exclusively on a level surface., and be protected from ultraviolet radiation.
During transportation and at the time of use you should take good care of the device case.
Keep the compressor clean and avoid kinking the hose. You should be aware that the pump casing is afraid of low temperatures, the likelihood of damage to the plastic is high.
To protect the unit from mechanical damage during transportation and storage, it is recommended to use a special cover, bag.
It is periodically necessary to inspect the device, to clean it from various contaminants. Taking into account the specifics of fishing, there is a high probability of moisture getting on the device, it is recommended to thoroughly dry the compressor.

It is recommended to purchase an electric air blower from trusted manufacturers and in specialized retail outlets, where you can get a warranty for the device.
The choice of a boat pump is necessary in accordance with the size of the boat.
It is recommended to pay special attention to the technical characteristics of the device (power, performance, etc.).
Observe the rules of operation and storage of the device.