How to glue liquid wallpaper. How to glue liquid wallpaper on a wall to get a beautiful and original surface. Why is this choice the best

Most developers do not know how to glue liquid wallpaper and find the process very difficult. In fact, the process is quite simple, and with knowledge of the technology, anyone can handle the job. In this article, we will figure out how to properly prepare the surface and apply the coating, you just need to repeat all the steps to ensure you get an excellent result.

This is also liquid wallpaper - how to glue them to get a real picture, we will figure it out below

Workflow steps

The technology can be divided into 3 stages:

Surface preparation;
Preparation of the composition;
Application of liquid wallpaper.

Remember that the coating is recommended only in dry rooms. The disadvantages of liquid wallpaper are few, and the most important of them is its poor resistance to moisture. But there is one way to protect the finish, which allows it to be used even in bathrooms and on, which I will discuss below.

Stage 1 - surface preparation

For work, you will need a certain set of materials, the list of which is indicated in the table.

Material	Description
The liquid wallpaper	One package is enough for 2.5-5 square meters, depending on the layer thickness and surface texture. All information is indicated on the label, so it is not difficult to calculate the required amount. As practice shows, the actual consumption is always slightly higher, so purchase the composition with a margin of 20%. Packing price ranges from 500 to 2000 rubles
Putty	It is best to take "Vetonit", as it retains its plasticity for a long time, is easy to apply and quickly rubbed out. The cost of the bag is about 550 rubles
Primer	With its help, the surface is strengthened. Also, the primer serves as a moisture barrier and improves the adhesion of the decorative coating. Use acrylic-based deep penetration formulations, their cost is about 50-100 rubles per liter, depending on the manufacturer. For wet rooms, it is best to use formulations with antiseptic additives.

If your walls are not white, then it is better to additionally purchase an inexpensive water-based paint to make the base light. You can even paint the walls to match the liquid wallpaper used.

From the tool you need the following:

Two spatulas - wide and narrow, for applying putty;
Brush or roller for priming surfaces;
Capacity for preparation of the composition;
Special trowel for applying liquid wallpaper. It is made of plastic, it is better to choose a transparent version, so you will see how the composition is leveled.

Preparing walls and ceilings is not difficult.

Just select the items that suit your case and follow the steps described in them:

If there are old coatings on the surface, then they must be removed. Wallpaper is removed using special compounds, whitewash is removed with a spatula. If the plaster or putty layer is cracked in places, then all unreliable areas must be removed. The work is done with an ordinary chisel and hammer;

The plane of the cleaned surface is checked with a level or rule. If there are many irregularities and significant drops on it, then the easiest way is to putty the wall completely. If the level drops do not exceed a few millimeters, then individual areas are putty, plus all the places where the old finish was removed are sealed. The composition is distributed in a layer of no more than 3 mm, if the irregularities are large, then the application is carried out in several stages;

The putty dries for about a day, after which it is necessary to finally level the surface using a sanding bar with sandpaper or mesh (grain size 150 or less). There is no need for a perfect result, minor scratches will be repaired with liquid wallpaper, the main thing is to display the main plane. To control the work, a light bulb or flashlight is used, the light shows all the flaws;

After sanding, you need to clean the walls from dust. For this, a vacuum cleaner or brush is used, it is important to remove the bulk of the dirt, which is formed a lot during grinding;
The prepared base is treated with a primer. Everything is simple here: the composition is applied to the surface in a uniform layer without smudges, special attention is paid to corners and other difficult areas. The second coat can be applied after the first coat has dried, usually taking several hours. If the finish is porous, then it is better to process it with a third layer for maximum effect;

You don't need to paint the white surface of the putty, as it is a good base for liquid wallpaper. If the walls are gray, then it is better to paint them either in white or in the color of the decorative coating that will be applied. This preparation allows you to achieve the best effect, because the dark base will not show through from under the coating.

Stage 2 - preparation of decorative coating

The use of this finishing material assumes its own preparation. The ease of application and the strength of the coating depend on how correctly the process is carried out.

The instructions for carrying out the work look like this:

First of all, you need to familiarize yourself with the information on the label. There are always recommendations from the manufacturer, which must be taken into account;
For work, it is best to use a large plastic container. First, the required amount of water is poured into it (the volume is indicated on the package) with a temperature of 30-40 degrees. It is impossible to take too hot liquid, from this the glue in the composition may simply curl up;
If glitter or other additives are used during work, then they must be added to the water immediately and mixed thoroughly. So you can achieve an even distribution of these elements throughout the mass;

The contents of one or more bags are poured into the water. Stirring is done by hand; do not use a power tool, as it will damage the fibers and crush the mass. It is necessary to stir the composition until the mass becomes homogeneous, the lumps are simply crushed by hands;

The mixed mass should be left for a certain period, most often it is 12 hours. But some formulations gain the required properties faster. Again, all information is indicated on the packaging;

If you need to use a lot of composition, then after preparing the mass, it can be folded back into the bag and left to settle. This will allow you to do with a small capacity.

After the required time has elapsed, the composition is mixed again. If it has settled in several containers, then you need to mix everything together, this will exclude changes in shade on the surface. Naturally, if the colors are different, then they must be prepared separately. It is important to mix the mass well and check again if there are any lumps in it.

Stage 3 - surface coating

Now I will explain how easy it is to glue liquid wallpaper. Compared to other coating options, this type of compound is the easiest to apply. This is why I recommend it to those who have no experience in construction.

You do not need special skills, it is enough to be careful and follow all the recommendations outlined below:

If a drawing will be applied to the wall, then first of all, its contours should be applied to the surface.... You can make patterns or draw by hand, it all depends on what you want to depict. The main thing is that the markup should be clear and clearly visible, since it is on it that you will be guided in the future;

To prevent the composition from falling off the surface, you need to check its adhesion in advance. To do this, the mass is distributed over a small area, if it does not hold, then it is worth adding water. Water is added at the rate of 500-700 grams per package. After thorough mixing, you can start working;

If the composition turned out to be very liquid, then it should be left for about half a day in a dry, warm place, the excess moisture will evaporate.

Work begins from any section of the wall. If the coating is monochromatic, then the easiest way is to go from the corner, if you have a drawing, then first of all you need to apply the background. Everything is simple here: with the help of a float, the mass is distributed in a layer of about 2 mm, the tool is kept at an angle of 15 degrees to the surface. You do not need to press down on the ironer, as you can damage the fibers, and the texture will not turn out very attractive;

If a drawing is applied, then liquid wallpaper is applied to the wall along the contours. For lines to be clear, they must be trimmed and compacted with a rubber trowel. With it, you simply pull the mass along the line and press. Naturally, the second color is applied after the first color has completely dried, that is, the more complex the composition, the longer it will take to implement;

Remember an important rule - the composition must be applied to the surface in one go. That is, if you have a monochromatic coating, then each wall is finished from beginning to end. There is no need to leave a piece of the surface and finish it later, the joint may become noticeable.

When smoothing, you should drive the tool in different directions so that the fibers are not in one direction;
After application, no longer than an hour and a half, you need to finally level the surface. To do this, use a wide spatula or trowel. The tool is moistened in water and the surface is smoothed. This allows you to achieve maximum uniformity of the coating;

If the composition was applied in a room with high humidity, then you need to treat the surface with acrylic varnish. It strengthens the finish and makes it moisture resistant. It is not difficult to apply varnish with your own hands, a brush is used for work, since you need to very carefully process all the irregularities. The only disadvantage of this treatment is that it will not work to repair the coating if it is damaged.

If you have damaged a separate area of the decorative coating, then it will not be difficult to fix the problem. Liquid wallpaper can be removed from the wall in the damaged area, soaked with water and reapplied, everything is very simple.

Output

After reading this review, you can easily figure out how to glue liquid wallpaper and how to properly prepare the base and the composition itself. It's very simple if you know all the nuances of the technology and follow clear recommendations. The video in this article will help you understand the topic even better, and if you still have questions, write them in the comments below.

Modern realities are forcing more and more people to think that it is quite possible to carry out finishing work on their own. One of the most important questions is how to glue liquid wallpaper to various materials. Indeed, this variety is significantly different from their paper or non-woven counterparts and requires a special approach.

First of all, you need to understand that working with liquid wallpaper is significantly different from the sticker roll-up options. The process is much more like wall cladding with plaster or putty. There is a simple explanation for this: the material is a set of components, including shredded fibers of cellulose, cotton and silk. Various environmentally friendly additives serve as binding elements. Distinctive decorative effects are achieved through all kinds of inclusions.

Thus, a mixture of amazing properties is obtained, which makes it very popular. The only significant drawback is the high price, which is largely due to the complexity of production.

Sticker or application

Currently, there is a lot of controversy about whether it is worth doing the work completely yourself. Many masters insist that only professionals who are well acquainted with the application technique can perform this work with high quality. This leads to the fact that many turn to specialists for gluing liquid wallpaper.

In reality, there are no restrictions, you can stick such wallpaper yourself. The technological features of the product do not require special experience and the use of special tools. The main thing is to clearly follow the required order of work, which includes several interrelated stages.

The technology for applying liquid wallpaper is quite simple and with proper skill, you can do the work yourself

It is also worth making a reservation that the term "stick" is more understandable for perception, but does not characterize this procedure at all, the concept of "application" or "styling" will be more accurate.

On a note! These products are sold as dry mix packed in polyethylene bags. Each of them contains instructions for use, which you must definitely familiarize yourself with in order to understand what conditions must be observed in the process of work.

The feasibility of high-quality wall preparation

Of course, this material can be glued to any surface, but it looks more advantageous on the walls. With a little time and effort, you can get an effect that will surpass all expectations, because there are many options for the manifestation of imagination.

But gluing liquid wallpaper requires careful preparation, which depends on the base material. It will be a mistake to take into account the frequently encountered advice that the prepared solution will hide all existing defects.

It is best to apply decorative material on pre-prepared walls.

Working with old or plastered walls

This option is found in most cases. A wall is a surface that has already been finished many times. Therefore, you should follow these steps:

Completely remove the previous decorative coating. Particular attention must be paid to the painted areas, they cannot be left, therefore the only correct solution is a complete cleaning.
Check the quality of the plaster or putty. Due to the fact that defects and shedding are unacceptable, all defects are eliminated. If required, complete finishing is carried out.
It is obligatory to impregnate the surfaces with a primer. She must have deep penetration.

GKL surfaces

Plasterboard is increasingly used for leveling walls, so it is not surprising that it will serve as the basis for decorative cladding. But you need to take into account some of the nuances:

Much attention is paid to the joints. This is the most problematic area. The fact is that liquid wallpaper creates a solid canvas, so cracks will immediately be reflected on the front side of the coating. To avoid such troubles, all seams must be reinforced with reinforced tape.
Difficulties can arise with an untreated cardboard surface. This will lead to two problems. Firstly, the water will be absorbed too quickly, which will cause unevenness and compression. Secondly, if it is necessary to remove the decorative layer, then the plate itself will suffer. Therefore, it is advisable to cover the boards with a putty.
We must not forget about the use of a primer, this is a mandatory procedure.

A similar scenario for working with wooden surfaces that have been pre-faced with plywood or OSB.

Technology for applying liquid wallpaper

First of all, it is worth clarifying how to work with liquid wallpaper while preparing the mixture. It is this stage that can have a significant impact on the final result. It is important to remember the basic rule: stirring must be very gentle, so it is carried out by hand, this will avoid damage to the base.

Kneading silk plaster by hand

Required tools:

A set of spatulas. This tool must be flexible enough.
Trowel. It will be needed to distribute the mixture in a given area.
Grater. With its help, it is possible to form the necessary texture, so it is better to choose transparent options.

On a note! In view of the fact that some tool may have been previously used, it is advisable to make sure that its working surfaces are completely clean.

Although the work itself is not difficult, applying the composition will require concentration and care. This will avoid oversights.

VIDEO: how to glue liquid wallpaper on the wall

Step-by-step instruction:

Summarizing the above, it becomes clear how to glue the liquid wallpaper yourself and get the desired texture. The main thing is to practice a little to understand the basic principles. And then unforeseen difficulties will not arise in the process of work.

The simplest wall decoration material is liquid wallpaper. How to glue them, because they have little in common with ordinary rolls? Read about the advantages of finishing and the correct work with the material below.

Characteristic

What is liquid wallpaper? It is a modern wall decoration material. In appearance, such wallpaper resembles sawdust or plaster. They consist of cellulose, silk or cotton fibers with the addition of acrylic, dye, fungicide and adhesive components. Sometimes they are supplemented with decorative elements: sparkles, stone chips. They are sold in two versions: in the form of a dry mixture (in plastic bags of 1 kg), which must be diluted with water, or a ready-made solution.

Why is liquid wallpaper so attractive? The way they are applied differs from the laborious gluing of rolls. This reduces the repair time, which is good news. A layer of liquid plaster, just applied to the wall, resembles paint, but when it dries, it turns out to be embossed, does not collect dust, serves for a long time and can be easily removed when tired.

You can experiment with the coating. From a white mixture without additives, original compositions are prepared with the inclusion of various dyes and decorative elements. But this method is more accessible to professionals.

Advantages and disadvantages

They are flexible, easy to prepare and apply to walls. Installation does not require special skills, expensive tools. They are convenient for pasting corners and relief surfaces (arches).
It is an environmentally friendly material that is safe for health. Such wallpaper can be glued in the children's room.
Liquid wallpaper allows you to form patterns.
They look attractive and neat. No seams.
Wallpaper regulates the humidity in the room, absorbing or releasing moisture, depending on its excess or lack.
The coating is soft and warm to the touch.
Wallpaper has anti-static properties.
Do not absorb foreign odors.
They repel fungus and prevent mold growth.
They have sound and heat insulation properties due to their porous structure.
They do not cause allergic reactions.
They are not afraid of shrinkage.
Suitable for any premises.
Easily restored in case of mechanical damage.
They are mounted on many types of surfaces: concrete, wood, metal, drywall and even painted surfaces.

Of the minuses, it is worth noting the rather high cost and non-standard rules of care (you cannot wet it). Such a coating does not withstand mechanical stress poorly. Otherwise, liquid plaster is trustworthy.

Advice! Since liquid wallpaper is afraid of moisture, when finishing it is worth covering them with a colorless varnish. Protected in this way, the coating is suitable for all types of premises, including bathrooms and kitchens.

Preparatory stage: walls

Another advantage of liquid wallpaper: it can be applied to an uneven wall, as it smooths out small surface defects. Nevertheless, a little preparation will be needed:

The old finish is removed first. The plaster and paint are removed with a spatula, the old wallpaper is soaked with water and peeled off.
The coating is applied only to a clean wall. The surface gets rid of dust and other dirt, as well as small particles of the old finish. Cleaning is done with sandpaper.
If there are nails in the wall, it is recommended to cover the caps with white enamel.
Then all cracks and chips are repaired. You need to putty the wall depending on its condition. If it is more or less even, then partially putty. Small defects will hide under the embossed liquid wallpaper.
After the putty has dried, the base must be primed. On sale there are special primers for walls for gluing liquid wallpaper.

Advice! If the walls are made of plasterboard, then they must be putty and covered with an aqueous emulsion. This will help to avoid wetting the surface when applying the liquid layer. To increase moisture resistance, PVA glue (3: 1) is added to the putty mixture.

Mix preparation

Most often, wallpaper is bought in dry bags. To stick liquid wallpaper on the wall, you need to prepare a mixture:

Pour warm water into a deep container.
Add dry mixture in small portions, stirring with a whisk. And it is best to stir the composition with your hands to avoid damaging it.
Add and stir until a thick, creamy mass is obtained.
Decorative components are added if desired.
The mixture must be left for 15-20 minutes for the wallpaper to swell.
Stir again, remove large lumps.
The mixture is ready.

It is recommended to prepare a solution of liquid wallpaper for the entire room at once, so that the finish is uniform in color. Follow the directions on the dry mix packaging for the most accurate wallpaper mixing results.

How to stick

Wallpaper is applied in two ways: by spraying with a special pistol or by spreading with a wide spatula. Since it is not always possible to get special equipment, consider the second method.

To glue, or rather apply liquid wallpaper, you will need:

putty knife;
knurling roller;
colorless varnish.

How to apply the mixture correctly:

We scoop up a little mortar with a spatula and apply it to the wall so that no bulges and voids are formed under the coating. Better to apply layers in a specific way: horizontal or vertical stripes, herringbone, zigzag or spiral. This will create a beautiful finish and a random application will not create an aesthetically pleasing finish.
We level the first portion.
Now we distribute the next part of the finish in the same way.
Each layer of wallpaper should blend into the other. Pay attention to the uniformity of the coating.
Each square meter is leveled with a roller.
If defects are found, then we correct them in hot pursuit: slightly moisten the place with water, remove the unsuccessful coating with a spatula, apply a fresh portion and level. Be careful: the wallpaper does not tolerate contact with water, so adjust it no more than three times.
The recommended layer thickness is from 1 to 3 mm.
Wait until it is completely dry. This will take from 1 to 3 days, depending on the temperature and humidity. The warmer and drier in the room, the faster the liquid wallpaper dries.
If necessary, the dried finish is coated with a colorless varnish. These wallpapers can be washed, and they also become more attractive in appearance.

Advice! You should not press the wallpaper too hard, otherwise you will not be able to achieve a textured surface. But undershooting is also not recommended: this way the wallpaper layer can come off under its own weight.

You can create a relief pattern on liquid wallpaper. This will require a roller or brush. You need to wet the object and paint something on the wet surface. Drawings of different colors are created from liquid wallpaper.

You will need a stencil. Place it on the wall and fill with one type of wallpaper, smooth the edges. The next layer is applied after the previous one has dried. In this case, it is not necessary to observe the same thickness of the parts of the drawing - individual elements can be thicker or thinner than the main layer, creating the effect of a bas-relief or high-relief, creating a volumetric composition.

To keep the repair for a long time, follow these recommendations:

Work is carried out in a room with an air temperature of at least +10 degrees.
Tools should be clean and free of grease as well as surfaces.
Pasting the walls with one color of wallpaper is done in one step. Don't leave unfinished finishes.
If the solution does not stick, then add a little water to it.
When applying the mixture with a spatula, you can help yourself with your hands, since the composition is safe.
After finishing work, ventilate the room well, as the final appearance of the coating takes on after complete drying. Avoid drafts, however.
Do not use hard brushes or detergents to care for liquid wallpaper. They damage the coating, which is not resistant to mechanical stress.
Do not discard leftover solution. It is useful for adjusting the finished coating. Store it in an airtight container in a cool place. You can wait for the mixture to dry and pour it into a bag.

Liquid wallpaper is an alternative finish that does not require much time and effort. There is no need to make tedious measurements and be afraid that the wallpaper sheet will become covered with bubbles. Although the liquid version of the wallpaper has its drawbacks, the merits still exceed them. The end result of the installation will delight the owners with beauty, reliability and practicality, if everything is done correctly.

Date: 26.06.2017

Covering walls with a pasty base has many advantages over conventional roll wallpaper. The complete absence of seams and ease of application have earned the material popularity and positive reviews. You can make repairs using liquid wallpaper with your own hands. Figuring out how to apply them to the wall is not at all difficult. In many ways, coating is similar to filling or painting. Let's take a closer look at how to glue liquid wallpaper!

Choosing a wall covering

Different brands of dry base for preparing wall coverings differ little in quality. The products of French enterprises are considered the best. A wide range of colors is presented, allowing you to embody any design ideas. The price of the product is correspondingly high. Turkey offers a cheaper dry base, while the quality of the product remains high. The most affordable in terms of price are Russian-made products.

Liquid wallpaper design

Drawings on the walls using liquid wallpaper

Wall decoration with liquid wallpaper

The choice of building material is carried out taking into account the personal preferences of the buyer and the general interior of the room. Products vary in color and texture. Some manufacturers add glitters, golden or silvery fibers, and other elements of the customer's choice to the original product.

Preparing the room for renovation

Careful processing and preparation of the room for renovation is the key to a good result. First of all, the old coating should be removed. The whole room is processed with sandpaper, dust, mold are removed, small irregularities are smoothed out. Cracks and defects in the walls must be repaired.

A well-prepared plane should be relatively flat and uniform and free from stains. It should be remembered that a wet solution can damage the putty layer. The walls are covered with white water-based paint. The heads of nails and screws are also painted over with white paint. Wooden surfaces are treated with oil paint: believe me, we know how to glue liquid wallpaper

Sealing cracks in the walls with a trowel

Smoothing irregularities before applying liquid wallpaper

Sanding the surface with sandpaper before gluing with liquid wallpaper

Preparation of the mixture

Before preparing the mortar, carefully read the manufacturer's instructions. Some types of wallpaper are prepared in advance, 5-15 hours before the start of the renovation work. The product consists of shredded pieces of cellulose, silk fibers and dry glue. Manufacturers often add various decorative elements to the dry base. If desired, you can add a small amount of decor yourself.

All items can be packaged in separate bags or in one package. If the components are packed separately, they should be thoroughly dry mixed. Mixing is carried out on a flat surface by hand. At this stage, you can control the number of decorative elements.

Before preparing a mixture of liquid wallpaper, you should carefully study the instructions for use. In some cases, the dry material is poured with water, in others, the dry base is poured into the water.

To prepare the construction mixture, you will need a plastic container (bucket, basin, etc.) with a volume of 7 liters and a diameter of 50 cm. The future mixture is easily soaked in water and the container is completely cleaned after use.

Dilution of liquid wallpaper

Water for liquid wallpaper

The process of preparing liquid wallpaper

The water is used clean, filtered, without sediment. Depending on the manufacturer, the label indicates the temperature of the water and the mixing ratio of the solution. Even if there are no temperature requirements, it is better to heat the water up to 25-30 degrees. Hands should be comfortable when stirring the solution. At the same time, one packet of dry base is kneaded in a container. In one batch, it is necessary to prepare a sufficient amount of mortar to finish the entire room. Stirring is carried out in several containers. Stages of preparation of the mixture:

Put the contents of the wallpaper bag into the prepared container.
Pour the required amount of clean water into a measuring container according to the instructions on the package.
Add water to a container with a dry base.
Stir the building mixture by hand until smooth. For mixing, you can use special mechanical devices (stirrers, etc.).
If necessary, bring the mixture to the consistency of heavy cream, gradually adding a small amount of water. Too thick and dense paste is difficult to apply, and the consumption of building components increases. Liquid mixture can drip off vertical surfaces.

Liquid wallpaper before gluing

Mixing liquid wallpaper with your hands

Instructions for preparing liquid wallpaper

Material application

In fact, liquid wallpaper is a type of plaster and is applied to the surface to be treated with a spatula. To apply the building base, you will need the following tools:

Spatula 20 to 70 cm wide
Trowel (trowel)
Spray gun (spray gun)
Special grater made of plastic or metal

The ready-made solution is collected in small portions with a trowel or by hand and applied to the wall or with a spatula. With a slight movement of the spatula, the substance is distributed over the surface. The tool is placed at a slight angle to the wall so that the mortar is forced out from under the trowel. The layer thickness is determined by the manufacturer's recommendations and is usually 2-3 mm. One package of wallpaper is enough for 4-6 square meters.

A construction trowel can be used from metal, glass or plastic, but always with a flat surface.

During work, the material is applied at eye level. Stretching on toes or bending over is not recommended in order to avoid unevenness and defects. For convenience, a ladder or chair is used.

Applying liquid wallpaper with a spatula

Applying liquid wallpaper to the wall with a trowel

Applying liquid wallpaper to a clean surface

The distribution of the liquid mixture is carried out in small areas. Each subsequent portion of the solution joins the previous one. After processing 1-1.5 square meters, the site is leveled with a special construction float. The tool is moistened with water from a spray bottle and the wallpaper is additionally smoothed. The grater is placed at an angle of 10-15 degrees relative to the wall and with little effort is carried over the surface. After leveling, continue wallpapering.

The laying of the fibers of the pasty solution directly depends on the direction of movement of the spatula and trowel. If you plan to create a homogeneous interior in the room, the movements of the spatula should always be directed in one direction. Short movements with a float are made several times in different directions on the same area. Thus, the fibers in the building product will be evenly and evenly distributed. It is possible to create background shapes and patterns using fibers located in different directions on some parts of the wall.

Additional processing

Low moisture resistance of the building composition is both an advantage and a disadvantage of liquid wallpaper. If a part of the wall covering is defective, the damaged part can be easily replaced. When using wallpaper in the bathroom or kitchen, additional processing is required. Common colorless varnish is often used. Some manufacturers give their recommendations for choosing a moisture-resistant treatment. Certain types of varnish can be mixed into the solution at the stage of preparing the glue mass. The use of a protective coating can significantly increase repair costs.

Protective coating on liquid wallpaper

Moisture-resistant protective coating for green liquid wallpaper

Protective colorless varnish on liquid wallpaper

The moisture-resistant coating must be an environmentally friendly substance, free of solvents and impurities. After drying, the varnish increases the moisture resistance and durability of liquid wallpaper. The protected surface can be wet cleaned with mild cleaning agents, without accidental drops. Repairing and replacing damaged parts with new ones becomes difficult.

Replacing part of the wallpaper

In some cases, the wall covering is damaged as a result of mechanical action, the ingress of various liquids or technical work on laying cables, etc. Unlike conventional roll wallpaper, any part of the liquid base can be replaced. As a rule, after repair, a small amount of a dry base is left for such an occasion.

Replacing the damaged area of liquid wallpaper

Removing old liquid wallpaper

Tools for removing liquid wallpaper and applying new

The damaged area is moistened with water from a spray bottle or a wet rag. With a metal tool (spatula, etc.), remove the soaked wallpaper. If the material has not been damaged and is removed for technical work, it is removed in a clean glass jar and used later. The defective wallpaper is discarded and replaced with new ones. After carrying out the planned maintenance work, the surface is covered with a primer.
The edges of the coating adjacent to the repaired area are moisturized and softened. To embed a small area, a new batch of dry base is carried out in sufficient quantity. If the removed material has not been damaged, it is diluted with clean water to a homogeneous pasty mass and applied back to the wall. The site is processed with a construction float.

Benefits of a liquid mixture

The material does not require a perfectly flat surface for high-quality application. A pasty solution allows you to smooth out small defects.
The product does not have an unpleasant odor, unlike paint.
A layer of paper of a few millimeters is a good additional wall insulation. This quality is especially true in cold climates.
The pasty mass provides additional sound insulation, which is appreciated in urban apartments.
The coating is free of seams and joints, any unsealed gaps are filled with a pasty base.
The spreadable mixture can be spread vertically or horizontally, at any angle.
There is no need for the correct selection of the pattern and cutting of the paper roll, there are no unnecessary scraps left.
The application of the solution can be carried out independently, without resorting to the services of professional repairmen.

Repair work is significantly accelerated when using liquid wallpaper. The paste is easily applied to any surface. If desired, the room is decorated with different colors and patterns or pictures are created in frames. Even a non-professional builder will cope with home repairs. Rooms in an apartment or private house acquire a fresh, well-groomed look, and the variety of shades and fillers presented allows you to choose wallpaper for any interior.

Technoplex has very good technical characteristics. Extrusion TechnoNICOL has low thermal conductivity, resistance to mechanical stress. Let's take a closer look at the properties, use and installation methods of thermal insulation boards, what is the difference between extruded polystyrene and technoplex, we will talk about in the next article.