How to sheathe doorways. How to decorate a doorway beautifully - an overview of materials and options. Decoration of doorways

A lot of people want to diversify their interior. In addition to transforming the room itself, many are trying to highlight the doorway, while using a variety of methods. The design of the doorway is the first thing guests will see when they enter the room. It will definitely get attention. Therefore, it is important to know how to highlight this part of the interior.

Finishing Features

The doorway is very often trimmed without installing a door leaf. In this case, you can save a large amount of money on the purchase of a door structure and its installation. This finish is different in that it is very diverse and original. In most of the apartments, ordinary doors are installed, and in this way you can diversify the interior. A special doorway can be a highlight of any interior.

The doorway is able to blur the boundaries between rooms but also separate them. This design can make the room visually wider and more spacious. The finish is also distinguished by the fact that in this case the doorway is not necessarily drawn up in a classic rectangular shape, as is the case with door structures, but other forms are preferred. For example, you can make a domed, rounded, diamond-shaped, trapezoidal passage.

Also, the doorway is made out according to the principle of a closed type. In this case, it is filled with screens and partitions. This solution is perfect for zoning rooms and highlighting different functional areas. A feature of the doorway decoration is that it always initially has the shape of a rectangle.

You can change its shape with intricate patterns without having to carry out complex installation, which is a big advantage of this design.

Finishing the doorway can complement the interior design. So, strict standard forms are more suitable for classical styles, while newer and more unusual solutions are used for modern interiors. Such a design can have any complex geometric shape.

Another feature of the finish is that it is carried out in one stage. After that, you do not have to take care of the structure, as is the case with doors. When decorating and finishing, you can use absolutely any materials, there are no restrictions on this. In addition, the finish is different in that it is quite simple, anyone can do it on their own.

The doorway can have doors, an arch, curtains.

The principle of its design is divided into two large groups:

with doors;
without doors.

Options for framing the opening with and without doors in the apartment

Framing a traditional opening involves the installation of a door frame and a door leaf. At the same time, the size and appearance of the door can be absolutely any. This is the most common design of the passage to the room. The door is used to separate rooms, it performs the function of sound insulation and thermal insulation.

But many decide to design a doorway without a door. The door structure is abandoned in the case when the entrance does not lead to a bedroom, nursery or other room, but to a more public room, such as a dining room, living room, hall, kitchen.

Thus, all these rooms unite and make the atmosphere in the house more comfortable.

Cashing the opening of interior products

A variety of methods are used to frame the doorway, it can be both natural materials and their artificial counterparts.

Often used:

Plastic materials (PVC);
MDF panels;
chipboard;
Tree;
Polyurethane.

As a rule, this part of the room is framed with a tree. Very often, wooden architraves are made from finger-jointed wood. Moreover, pine very often acts as a source of wood, since it is durable. Wooden platbands are usually varnished, it looks very noble. Telescopic cashing is also very popular.

Carved cashing looks beautiful. As a rule, carvings are made by craftsmen with their own hands, and each such pattern can be very elegant and unique. More budgetary are platbands from MDF. But at the same time, they are not considered less high-quality and durable. They are absolutely not subject to rotting and many external influences.

The only negative feature of such a material is that it does not withstand moisture well. The easiest way to care for plastic platbands. They retain their original appearance for many years. As a rule, plastic platbands have the most interesting and bright design.

They are able to keep their color for a long time.

Plastic is absolutely not susceptible to the effects of humidity and temperature changes. In case you want to pass electrical wires and cables through the doorway, a PVC frame is an excellent solution. Such a platband has a special cable channel that simplifies this process. Some models look very luxurious due to the fact that they outwardly imitate a wood pattern. In general, PVC completely repeats the qualitative characteristics of plastic.

Platbands also share in appearance. Their width can be any, as well as thickness.

All of them are divided into:

flat;
rounded;
curly.

As a rule, these types of platbands are mass-produced in factories.

But carved platbands are a separate type, which is a product of the hands of a master, distinguished by originality.

Decoration with decorative stone

Decorative stone can decorate any doorway. Very often it is used after installing an iron door. He is able to hide any flaws and transform the appearance of the opening. Decorative stone is quite durable and looks very elegant.

It is resistant to external influences and looks great in any light. During the day it will sparkle in the sun, and in the evening it will shine luxuriously in dimmed light. Decorative stone is now decorating the passage by adhesive installation.

The decorative analogue of natural stone is lighter and more affordable in terms of cost. You can choose a model of absolutely any color and texture. So, you can decorate the passage with a wide variety of pebbles, while creating a unique pattern. The design of the corners with a decorative stone in the Roman style looks beautiful.

Also, many decorate the opening using the torn edge technique. It involves laying out a stone in a chaotic, not perfectly even order.

In this way, you can even create the effect of old masonry and lay out any bizarre shape.

Plaster

Plaster is now very often used to emphasize the bizarre shape of the arched partition. In this case, decorative relief plaster is used. It is combined with other finishing materials, such as artificial stone and tiles. Venetian and microcement plaster are also used as finishes, since such a lining looks very elegant.

But not everyone can finish the doorway in this way, for this you need to have special skills.

Wallpapering

With the help of wallpaper, not only the doorway itself is trimmed, but also the door leaf. Moreover, in the second case, the most resistant to external influences wallpaper is used for this, since the door is very often touched by hands. The simplest wallpapers can get dirty very easily, so it is important to use only high-quality and durable coatings. Wallpaper allows you to completely disguise the door, thus hiding the opening.

You can paste over the canvas with wallpaper of the same color and pattern., as well as all the walls adjacent to it. This finishing option is very often used to decorate the passage to the office. If you have a relief door installed, you can only partially steal it with wallpaper. With the help of wallpaper, you can even create drawings on the door leaf. In this case, you can cut out geometric shapes and other fragments from them.

Also, with the help of wallpaper, you can highlight the door leaf, pasting it with contrasting bright wallpaper that differs from the color of the walls. Moreover, such a coating can be partially painted to make it more unusual and interesting.

Arched structures are also trimmed with wallpaper.

Upgrading slopes with siding

Siding is a finishing material that has an interesting textured surface. It is distinguished by its frizziness. In this case, vinyl siding and even steel sheets are used. Such a finishing material is perfect for facing slopes and is quite durable. Moreover, as a rule, it is selected for the decoration of windows and window frames are framed in the same way.

Siding can be easily installed by hand and will be fairly easy to care for. Moreover, manufacturers present a wide variety of models from various materials, decorated in unusual colors. The desired coating can be chosen for any interior design.

Stucco decoration

Polyurethane stucco molding is often used to finish the doorway. For narrow doorways, smoother and not too embossed stucco molding is most often chosen. It is believed that too voluminous textures can visually narrow the aisles and make the room less spacious. Volumetric stucco molding is most often used to decorate high spacious doorways.

Stucco is fixed with a special glue. It is also often covered with varnish or paint.

This design looks very unusual and diverse due to the combination of interesting textures.

tiling

Now very popular is the edging of the passage with ceramic tiles. In this case, gypsum tiles or clinker are often used. Clinker imitates bricks and is perfect for finishing not only doorways, but also window openings.

Usually such tiles are laid out by analogy with brickwork. Such an analogue looks quite unusual and believable. Also, smooth tiles are used to finish the doorway. In this case, it is laid out with a mosaic. This design looks very bright and impressive.

Sheathing with plasterboard or clapboard

Lining and drywall are one of the most inexpensive finishing materials. That is why they are often used to finish the doorway. Both of these materials can be easily processed with your own hands using standard tools. You do not have to carry out long preparatory work.

As for drywall, it has a smooth surface, which is usually decorated with bright coatings. You can choose any decor option for decorating such material.

It is easy to install and lasts long enough.

stencil decoration

Now, murals and unusual drawings are very often used to decorate the entrance to the room. But not everyone can create a beautiful and unique pattern with their own hands. In this case, a stencil is used. So you can very quickly correctly and evenly apply images to the door leaf or to the edging of arched structures.

The only drawback of this finishing option is that it is rather boring, because the patterns will not be a picturesque picture, but only patterns of the same type. So you can decorate the doorway with vine leaves, branches, flowers and other images.

Textile

This finish is quite popular. As a rule, various curtains and tulle are hung between rooms, which fill the room with lightness and create an invisible barrier. They fill the design with air, making it more elegant. Curtains are usually chosen from silk, cotton, linen. Dense velvet models are quite popular.

Magnetic curtains are also installed, which are great for protecting against insects. There are also beautiful filament curtains in the form of rain. You can hang a translucent tulle, which will create a light veil between different rooms.

Facing arches between rooms

As a rule, the room is made more spacious by creating an arch at the entrance. In this case, such structures are often installed at the entrance to the room from a narrow corridor. The arch fills it with space and comfort. Arches can have the most unusual and intricate shapes.

In this case, the choice of the shape of the doorway depends on the taste of the owner of the house and on the style of the interior.

Most arched structures are symmetrical. For their decoration use the same materials on both sides. But in some cases, arches can be asymmetrical in shape and design. For rooms in a classic style, only symmetrical models are selected. In this case, they are often lined with decorative stone, wood and other natural or imitating natural materials.

Arches with vertical slopes in the form of columns look very nice. This solution is perfect for those who adhere to the classic interior design. For a more artsy style, they choose the design of arches with a wide variety of decorative elements. To do this, use an unusual stucco molding. The upper part can be decorated with a plaster bas-relief.

More modern arches have a fairly simple design, but can have bizarre shapes.

In this case, they are distinguished by unusual lines and intricate patterns.

Some nuances

When choosing a design, you need to consider some rules. The decor of a wide and narrow doorway should be different. For a wide one, more embossed and large decorative elements are usually selected, and narrow openings are decorated with simple finishing materials. It is better to use light decorative elements for this.

A high doorway is often designed in the form of an arch. She is able to add luxury and grace to the interior of the house. It is not customary to decorate a deep doorway with arches, because then the design will look very massive. But in this case, an arch model with large columns is suitable.

If your goal is not to unite different rooms, but to delimit them, then compartment doors are perfect for this. They well separate different functional areas and look very stylish. Most often they are used to decorate rooms in modern styles.

When choosing a material for cladding, attention must be paid to the quality of finishing materials. Many inexpensive plastic panels are very unsustainable and can even release harmful substances. Therefore, try to give preference to only high-quality materials.

Polyurethane finishing materials should not be installed at the entrance to the kitchen. This is due to the fact that they are characterized by low thermal stability. To design such a doorway, you should choose materials that are more resistant to elevated temperatures.

If you want to dismantle the door frame for finishing, you should take into account that this can lead to cracks in the wall. That is why, before dismantling it, it is necessary to install a power frame.

Thus, you can carry out the correct design and, after that, decorate the doorway.

The appearance of the doors depends not only on the door itself, but also on the finish of its opening. Often, when installing it, homeowners do not take this into account. Installation and finishing of the front door opening are different things that are performed by different craftsmen. These processes can be carried out without outside help using various special materials used for these types of work.

What to do with slopes

Facing the opening is carried out directly at the initiative of the owner of the property. During the installation and installation process, this is rarely thought about and remembered, but after it they realize how important it is. And this is not only the aesthetic side of the issue. It means its practical purpose.

The door is not only a necessary household item or addition to the design. It performs many different functions. Equally important is its decoration. With her help:

The right color will complement the overall interior of the room.
You can increase the level of heat and sound insulation of housing.
With proper installation and finishing, the level of security of the apartment increases.

Make it, perhaps, with your own hands. It does not require special knowledge and skills. The process takes little time and effort. Depending on what kind of cladding will be done: inside or outside, it is necessary to choose the material. To date, there is a huge number of variations of choice for the implementation of this process, designed for all types of finishes.

The most popular of them are:

Plastering. It is a classic option, does not require much effort, but has a not quite aesthetic appearance. Therefore, after facing with such a tool, it will be necessary to decorate the opening.
Plasterboard sheets. Very popular in residential and commercial structures, it has a very attractive appearance. The disadvantage can be called low strength, so its choice should be approached very carefully.
Laminated panels. This is the most durable method, it is considered universal, suitable for both entrance and interior slopes.
A rock. It is used mainly for arches. Serves more as a decor for the room.
If we are talking about an opening without doors, the most optimal way is to add. It looks very elegant and luxurious. Usually used in Greek or Byzantine styles, with columns and carved appliqués.
Veneer. It is considered to be a universal tool, ideal for any kind.

Plasterboard cladding

Finishing the entrance door opening from the inside and outside can be carried out using drywall. This material has a number of advantages, such as:

Does not harm health, as it is environmentally friendly.
It is odorless and does not emit toxic substances.
The result is a perfectly flat surface that can be subsequently decorated in various ways.

Facing is called not only giving the opening an attractive appearance, but also insulation. Its implementation must be approached with responsibility and patience. You will need to accurately measure all dimensions. Despite its high quality, drywall is quite affordable.

Immediately before execution, it is necessary to prepare all the tools that may be needed in the process. The main ones are:

The drywall itself.
Mounting foam.
Glue designed specifically for this.
Putty.
Primer.
Dye.
Profile.
Spatulas of various sizes.
Perforator.
Level.
Plumb.

The process technology includes the following steps:

Cleaning the surface from the previous coating. You can use a spatula or sandpaper.
Taking measurements.
Formation of the necessary elements from drywall.
Fasten them to the slopes using special glue or a drill.
The remaining gaps should be blown out with mounting foam.
Treat with a solution to prevent the spread of mold and mildew.
After the foam has dried, cover the sheets with finishing putty. You can also use plastic corners.

Drywall can be painted or decorated in any other way if desired. It is possible to glue wallpaper, plastic panels or tiles on it. With its use, you can make an opening of the arch. It is also possible to mount the arched structure itself from it.

Application of plaster

Finishing the front door opening is most often done using plaster. This is one of the cheapest and most durable ways. This material is quite strong, little damaged even when exposed to mechanical means. With its use, it is possible to completely level the surface of the slopes. It does not require special skills, even people who do not have any experience in construction are familiar with it. The solution is easy to prepare and fairly easy to apply.

The instruction includes the following work steps:

Surface cleaning.
Slope degreasing.

Finishing with such means is convenient in ease of use. The price for it is not very high, which makes it affordable for the population. The process itself does not take much time. The only drawback in it is the time allotted for the complete drying of the first layer.

The plaster on top can be painted in any color. It remarkably tolerates any temperature, does not lend itself to dissolution and is not afraid of moisture. Excellent for exterior cladding where the material is exposed to the weather.

Wood and laminate finish

Very often, slopes are finished with laminate or wood. It looks quite nice and neat. But the difference between laminate and wood is not only the price, but the material itself. Laminate only in appearance is similar to wood.

It has a fairly low cost. It is easy to work with, it attaches quickly and lasts a long time. You can make the lining yourself, without the involvement of outside help. It is easy to give to a laminate any form necessary under a slope of a door. On average, one opening takes eleven sheets of standard size.

Laminate is divided into three types. All of them are characterized by numbers from 21 to 23. They mean the power load that this type is able to withstand. The strongest is laminate number 23. But a less weak one is also suitable for facing slopes.

Finishing with a laminate is carried out by applying it to the wall and fixing it with dowels or self-tapping screws. In this case, the size of the laminate sheet should be clearly calculated, and if it is larger in size, then the desired one should be cut. Internal corners can be decorated with special rails.

Finishing the doorway of the front door with wood is one of the most expensive due to the material used for it. The advantage is the uniqueness and originality of such a cladding. There are many types of wood with which you can carry out this process. It is not difficult to process, it can be given any shape.

Among the shortcomings, one can single out the fact that the tree does not like moisture. Therefore, it is not recommended to use it from the outside. It requires special care and handling. Otherwise, the tree may lose its attractive appearance. For a longer service life, it is necessary to open it with varnish or wax.

Finishing with decorative stone and veneer

Stone trim can be used both from the outside and from the inside. It looks great and serves not only as a lining, but also as a stylish design solution. It will give the room a unique look and originality.

The range of stone is quite large, which allows you to choose the one you need based on the financial situation and the wishes of the person. You can lay out the stone in any order. It all depends on the requirements and desires. The laying of the stone is carried out directly on the cement mortar. Basically, the decoration with decorative stone is carried out by arched openings. There it looks not only original, but has a refined and unique appearance. The stone is not afraid of moisture, so it can be safely used even on the street. This will not affect its appearance or quality in any way.

Veneer is a versatile material suitable for any interior. Veneer finishing has many advantages and disadvantages, such as:

A rich selection of colors and shades. This will save a lot of time and money in the future on decorating it. There is an opportunity to choose immediately the desired color.
Durable enough. But do not use it in places with direct exposure to ultraviolet rays. It is afraid of the sun and quickly enough collapses and deteriorates under its influence.
Doesn't like moisture.
Ideal for finishing slopes. Excellent adherence to the surface due to its unique composition.

Finishing should be given special attention, since the opening is a passageway. It can be done independently and without much money. Everything will depend on the material with which it is carried out.

Finishing the front door opening: slopes, options for cladding, instructions for use and decor

You probably want the corridor to look harmonious with the door. This article will tell you how to finish the front door opening.

How can you decorate the doorway of the front door

How to arrange a doorway? Indeed, such a question is no less important than the development of a general interior design. If you do the work correctly and efficiently, you get a reliable and beautiful coating, which will be the highlight of the room. An important aspect is the fact that there are many different materials that are perfect for this event.

Nuances that require attention

Finishing the front door opening is a process that has some rules. They must be followed in order to get the desired result. Pay attention to the following nuances:

Safety. For work, materials that will not be dangerous to humans should be used. This also applies to installation methods. That is, all parts are installed with the utmost reliability and in accordance with the technology.
Harmony. It is advisable to use such options that will be more consistent with the door structure. Of course, the situation is considered ideal when the material of the door and the opening are completely the same, but this is not always possible.
Sound and heat insulation. These are necessary parameters that deserve due attention.

For finishing the doorway, high-quality and safe materials should be used.

To perform the work of the highest quality, it is necessary to take into account all the nuances. If you ignore them, you get a coating that can be quite beautiful, but have many hidden defects.

On a note! It is erroneously considered that the finishing of the doorway consists only in facing the slopes. In fact, it is required to provide for the decoration of the outer perimeter. Many masters advise limiting themselves to installing platbands. This is a great solution, but rather trivial. Much better to show imagination and individuality.

The use of various materials and their features

Finishing the doorway of the front door can be done using different materials. Each of them has its own characteristics, they must be taken into account in order to choose the appropriate option for a particular situation.

Plaster. This is the most accessible and simple method of opening an opening. The technology requires applying the prepared composition to the surface. After drying, additional decoration is necessary. Often this option is the starting point for laying another material.

Stucco doorway - the most affordable and cheapest finishing option

Drywall. This method is similar to the previous one, but the work is carried out much faster. This is due to the fact that the gypsum boards are cut into the desired strips, which are placed on the trimmed areas. It should be borne in mind that this option allows you to get a flat surface, but needs further finishing.

Plasterboard sheathing is the fastest way to finish the front door opening

PVC, MDF, wood or veneer panels. This method can be considered the most popular. The fact is that such products do not need further processing. They can be made in different colors and textures. It should be understood that many of the products perform more decorative functions, so it is necessary to foresee additional heat and sound insulation in advance.

Finishing the doorway with MDF panels allows you to create a spectacular decorative coating

The stone is natural or artificial. A great option that allows you to get a very unusual surface. But there are some nuances that lie in the rules of laying.

Making a doorway with artificial stone

So, how to finish the doorway? To obtain a more harmonious coverage, many factors must be taken into account. Often, a technology that allows you to combine different types of materials is considered a good solution.

The specifics of working with different materials

It must be borne in mind that each finishing option is performed according to certain rules. They must be fully observed in order to achieve the desired quality.

Plaster

This classic version. Plastering is used because of its undeniable advantages:

Durability. The service life of the coating is calculated in tens of years.
Strength. If you use high-quality mixtures and do everything according to the rules, then the surface will be resistant to various influences.
Maintainability. This is an important factor, which lies in the fact that, if necessary, the damaged area is subject to restoration.
Low cost. The material is much cheaper than other options.

Plaster is a very strong, durable and cheap material.

But in order to do the job well, you need to be careful.

The general application technology is as follows:

It all starts with preparation. It consists in the fact that the surface is cleaned of all defects, dust and dirt. Cracks and crevices are well covered.
Two coats of primer are applied. The first will penetrate well into the pores, and the second will fix the result.
Beacons are installed on the sites, they are fixed on a small amount of solution. If required, a wooden lath is laid along the outer perimeter. It will serve as a guide and determine the thickness of the layer.

A wooden lath laid along the perimeter of the slope acts as a guide

For greater reliability, a reinforced mesh is used, it is fixed with dowels.
Areas that will not participate in the decoration are covered with cardboard and masking tape.
The mixture is prepared in the right amount. It is applied with a spatula, spreading around the entire perimeter. Evenness is checked by level.

On a note! When it is supposed to apply a layer with a thickness of more than 10 mm, the work is carried out in several stages. In this case, the reinforcing mesh is laid after the first or second layer.

Drywall is an option that is most successfully used when general wall cladding is performed with this product. Of course, you can also use it on your own. But it is important to consider that the material is quite fragile, so installation must be done with care.

Finishing the entrance opening is done like this:

Preliminary preparations are being made. It does not have to be as thorough as when using plaster, but it is necessary to correct all defects.
Next, the dimensions are taken. They are transferred to a separate sheet. This allows you to create detail. It is important to make repeated measurements, which will exclude the possibility of error.
In accordance with the data obtained, the cutting of the plates is done. This is easily done with a sharp utility knife.

As already mentioned, plasterboard finishing needs subsequent decoration. Paint can be used as a material.

Panel products

How to finish the front door opening with panels? This method is quite simple. According to its technology, it repeats the installation of drywall. But another option can be used. It lies in the fact that a preliminary crate is performed. It is necessary in order to carry out additional insulation.

The following actions are performed:

A wooden beam is installed around the perimeter. It is fixed vertically. Dowels are used as fasteners.

On a note! The slats must first be treated with antiseptics. This will help prevent mold or mildew.

It is believed that MDF or thick plastic panels will be the most preferable. Cheap PVC wall panels look very unrespectable.

Artificial and natural stone

This option looks very original. It allows you to get a beautiful surface, which is distinguished by originality. Of course, certain conditions must be met in order to achieve the desired result.

On a note! The material should be located in a small amount, especially if the hallway is small. The largest number of elements should be located at the bottom, decreasing upwards.

Finishing the opening with a decorative stone looks very impressive, but the main thing is not to overdo it.

How to trim the doorway of the front door with stone:

Preliminary marking of the surface is carried out. A scheme is being drawn up. For greater effect - the material is laid out on the floor. This will allow you to create the desired pattern.
The surface is well prepared. Small distortions are acceptable, but any defects are immediately eliminated.
The stone is fixed with glue. Laying starts from the bottom. Two technologies can be used: one is that the seams of the required thickness are formed, the other assumes their absence.
Particular attention is paid to the corners. They are formed by cutting and grinding.

Making a doorway with stone is a method that requires a combination with the overall interior design. The result can be a great visual effect.

How to decorate the doorway of the front door: finishing options (photo)

How to decorate the doorway of the front door? This question is very important. There are many different materials that are great for this finish.

Front door trim. Features of materials. plaster mixes. Plasterboard sheets. Laminated panels

The manufacture and installation of the front door is not an easy task, moreover, in most cases it requires the use of metalworking and welding equipment, so it is better to entrust such work to professionals.

However, as a rule, their responsibilities include only manufacturing and installation, so many apartment owners are worried about how to finish the doorway of the front door after it is installed?

Entrance door after installation.

Decoration of doorways

In this article, the reader will be offered all sorts of options for finishing the doorway of the front door using various finishing materials.

Here you will find detailed instructions that will help you do this simple work with your own hands, spending some free time on it.

Finishing with a special profile.

Materials for finishing doorways

Before finishing the doorway of the front door, you need to decide on the choice of materials used.

Depending on the location of the door and the aesthetic requirements for the decorative qualities of the finish, the following materials are best suited for this work:

Plastering with cement-sand mixtures is the most durable classic type of finish, however, due to its low aesthetic qualities, it requires additional decoration with decorative finishing materials. In its pure form, it can be used for finishing entrance doors in a garage, bathhouse, barn or other household buildings.
Finishing with plasterboard sheets is less durable, but in its finished form it has a more attractive appearance. Most often used in the design of the entrance group in residential and commercial premises.
Sheathing with laminated MDF panels is a fairly strong and durable finishing method that does not require additional design. It is used as a finishing finishing material for decorating entrance and interior door openings in apartments and residential buildings.

Plaster mixtures

It should be noted right away that working with plaster is quite laborious and dirty, so it is better to do it when the repair work has not yet been completed in the room.

In addition, it requires certain skills in the use of this building material.

The first step is to remove the old plaster and clean the doorway from construction debris.
A brick or concrete surface should be coated with a primer, and after it dries, install and fix the guide beacons with cement mortar, leveling them with a building level. (See also the article How to make a primer for putty.)
The door frame and the walls around the opening must be pasted over with paper masking tape, and a fiberglass reinforcing mesh should be fixed to the surface to be treated.
Dilute the plaster mixture in accordance with the instructions and fill first of all large potholes and voids in the wall. After that, using the rule, pressing it to the beacon profiles, evenly apply the plaster solution to the entire surface.
After the mortar has hardened, the resulting cracks and irregularities should be puttied with a finishing putty, and then painted with interior paint of the desired color.

Applying plaster.

Plasterboard sheets

Finishing the opening with drywall sheets can be considered the easiest way, which does not even require any experience with drywall.

In addition, to perform this work, you need to use a minimum set of materials.

The most important thing in this work, before finishing the front door opening, is to correctly measure the height and depth of all sides of the doorway.
Based on the dimensions obtained, it is necessary to cut out the necessary details from the drywall sheet so that they are tightly inserted into the doorway and cover the slopes from all sides.
Large potholes in the wall must be blown out with mounting foam, and then evenly applied with a snake to one side of the slope.
After that, press the appropriate piece of drywall to it and leave it until the foam polymerizes. Thus, it is necessary to sew up the doorway with plasterboard from all sides, and blow out the cracks with mounting foam.
At the end of the polymerization, you need to cut off the excess foam and drywall, and fill all the cracks with finishing putty or close with decorative plastic corners.

Further finishing of the front door opening can be done at the discretion of the owner: the surface can be painted, wallpapered, tiles or decorative plastic panels can be glued.

Application of mounting foam for gluing drywall to the wall.

In order to quickly and reliably glue drywall after applying the foam, it must be pressed against the wall for a short time and then immediately removed.

After that, let the foam dry for 8-10 minutes, install it in place and press it firmly against the wall.

Laminated panels

A large assortment and relatively low price of laminated MDF panels allows you to choose the color and texture of the material that will most closely match the overall design style of the entrance group.

Along the inner and outer edges of the opening, install wooden rails of the required section, securing them to the wall with dowels and self-tapping screws.

Schematic representation of MDF paneling. View from above.

Cut out the top part from the MDF sheet and fasten it to the rails with small self-tapping screws or finishing nails so that it covers the entire width of the slope.
Having selected the necessary angles, cut out and fasten the details of the side panels to the guides by analogy with the top panel.
In order to hide the visible fasteners on the outer corners with liquid nails or other similar glue, you need to fix the bending corner and glue a decorative rail of a suitable color into the inner corners.

As a final operation around the perimeter of the entrance, it is necessary to fix the door frames, however, it is recommended to install them only after the complete completion of the repair work in the apartment.

Materials for sheathing MDF panels.

In order to accurately select the corners and prevent the formation of cracks, it is recommended that you first make a template from thick cardboard, and after fine-tuning to its shape, cut out the panels.

Conclusion

From the presented article, we can conclude that almost every owner of his own home can perform independent design of a doorway. At the same time, it should be remembered that the front door is the most accessible place, therefore, when designing it, due attention should be paid to the reliability and strength of the materials used.

Finishing the doorway of the front door: what and how best to decorate, options, photos and videos

Finishing the doorway with laminate and other materials is very simple.

Doorway of the front door before and after finishing

Finishing Requirements

Before you start finishing the front door opening with your own hands, you should study the requirements for work.

They must be followed if you want to get decorative and durable slopes that will not lose their visual appeal for many years.

The installation of suitable door and opening fasteners is an important step in the work to increase the safety, strength and aesthetic appeal of the structure.
It is advisable to choose the same material from which the door is made. In any case, it should be in harmony with the situation and contribute to the creation of a single image.
It is important to determine the appropriate mounting method. So, a decorative stone is attached by gluing to the wall, and it is possible to sheathe it with MDF panels only after installing the crate.
Pay attention to sound insulation and the ability to save heat.
Finishing the doorway ends with the installation of platbands.
Sometimes different materials are used for interior and exterior decoration.

What materials are used?

Finishing the doorway after installing the iron door is carried out with the following materials:

cement-sand mortars;
drywall, acting as an independent option or the basis for subsequent finishing (for example, you can use wallpaper);
plastic, wood panels, laminate, veneer;
decorative stone, natural or artificial.

If you decide not to call the master, select the material and get to work.

However, it is important to learn in advance about the nuances of finishing and correctly assess your strengths.

Stucco doorway

Plaster is considered a classic option. This method is used in non-residential premises or where additional finishing is expected in the future. Plastering should be done with care and attention, and then carefully handle the doorway, because it will become difficult to care for it. But the method also has advantages: strength, durability, resistance to adverse environmental factors, the ability to easily repair in case of damage, cost-effectiveness (30 kg of plaster mixture costs 200-300 r).

The finishing process looks like this:

The surface is cleaned and then primed.
After drying, guide beacons are installed. The evenness of the position is determined by the building level, and fixation is carried out with a solution.
A reinforced mesh is attached to the surface. The door frame and walls that are not to be lined are covered with masking tape.
Holes and voids are filled with the solution, after which it is applied to the entire surface.
The resulting cracks are eliminated with putty.

The doorway is ready for painting or installing other facing materials.

Drywall finishing

It can also become the basis for the subsequent transformation or an independent option. Drywall is not as durable as plaster, but it looks attractive, strict and stylish, and it is also easy to install. Another important advantage of drywall sheets is the cost, which is in the range of 200-400 rubles.

Finishing the front door openings is carried out as follows:

Measurements are being taken.
Plasterboard sheets are cut into fragments. The resulting parts must completely cover the slopes and fit snugly against each other.
Damage to the surface is repaired with mounting foam.
Foam is also used to fix the finishing material. To do this, it is applied in a zigzag pattern to the wall, after which the drywall is pressed for a few minutes. It remains to wait 10 minutes and press the material again. In this way, fast and strong bonding is achieved.
The gaps remaining after the end of the work are sealed, excess drywall and foam are cut off.
The voids along the edges are closed with corners or putty.

Finishing with MDF panels

MDF is used for interior cladding of entrance doors in residential buildings and office premises. The material is characterized by durability, hygiene and aesthetics, provides good sound and heat insulation, and tolerates moisture well. Panels cost 150-250 rubles. per square meter. The tree will cost more: 300-700 r. Serious disadvantages of the material include its easy flammability and the fact that cladding is possible only after the installation of the frame.

An expensive purchase also includes the purchase of veneer - a wood material characterized by high strength and aesthetic appeal. True, direct sunlight is fatal for him. The price per square meter is up to 5,000 rubles.

To decorate a doorway with wood, veneer or MDF panels, you need:

Using self-tapping screws and dowels, install guides from wooden slats. The frame slats are treated with an antiseptic before starting work.
Adjust the panels to the desired size.
Attach the first part with screws or nails to the guides, continue cladding, completely covering the slope in width.
Mount corners and side panels to the guides.
Mask the fasteners with adhesive, install a decorative rail.
Attach platbands around the perimeter of the door.

plastic finish

A popular material, environmentally friendly, budget and unpretentious in care. Manufacturers offer a wide color palette, which makes it easy to match the plastic to the texture of the door leaf. A square meter costs no more than 200 rubles. But the material does not differ in special strength and is not suitable for every door.

The front door opening is lined with plastic according to the same principle as MDF: first, the surface is prepared, then the crate of the rails is attached, and plastic panels are already attached to it.

Sheathing with laminate

Such a finish usually does not raise questions even among inexperienced builders. This is due to the special flexibility of the laminate, its ability to take various forms. The material looks advantageous, does not harm the environment, but it does not tolerate high humidity well, so you should not use it from the outside of the opening. The price of sheets is 300-3000 rubles.

Finishing a doorway with a laminate differs little from facing with MDF panels. But it is not necessary to mount the frame: another finishing method, suitable for smooth walls without flaws, involves gluing the material with mounting foam immediately to the surface.

Finishing with decorative stone

Ideal for public places, although it is easy to decorate a cottage with stone. But this option is not cheap: the price of a natural or artificial decorative stone is set in the range of 200-1500 rubles. per square meter. The material is reliable, durable, tolerates temperature extremes and high humidity, and is suitable for both external and internal work.

Finishing is done like this:

The material is laid out on the floor, forming a pattern. If necessary, the edges are trimmed and sanded.
The opening under the door is cleaned, the damage is rubbed and eliminated with putty. After that, the surface is primed. Platbands and plinths are removed.
With the help of glue or “liquid nails”, the stone is attached to the walls, starting from the bottom from the corner. Gaps are either not left or filled with a sealing compound.
After drying, the adhesive that has fallen on the front side of the stone is removed. The composition that gives shine is applied.
The details of the opening are put in place.

It is important to know that a rectangular structure is lined with stone according to this principle: there is always more material at the bottom than at the top. The pattern is located symmetrically, taking into account vertical and horizontal seams, a good solution is the “torn” edges of the finish. Arched openings are made strictly along the contour.

Having understood the peculiarities of working with various materials, you can ennoble the doorway of the front door to your liking.

Finishing the doorway of the front door in 1 hour: methods and materials

It is not enough to install the front door - you still need to make a high-quality finish of the openings. This task is not so difficult as to not cope with it on your own.

The front door forms the first impression of the home, so it must be both reliable and aesthetically attractive, and well-mounted. At the same time, the complete editing cycle includes stages that are often neglected due to ignorance. These include finishing the slopes of the front door, which is necessary not only for the beauty of the structure, but also for high-quality operation for a long time.

What it is?

As practice shows, slopes are often confused with platbands, since platbands are their external, decorative part. By themselves, they have only an aesthetic function. But the slopes are involved in ensuring tightness, sound insulation and thermal insulation, increase the resistance of the front door to breaking.

By definition, slopes are the inner and outer portions of a wall that “surround” a door frame. Slopes are also considered to be the left, right and upper sides of the doorway in which the door is supposed, but not installed. Not all types of doorways have slopes on both sides. Sometimes they may be absent on the outside, but on the inside they are in most cases.

The device of the door slope is quite complicated. High-quality slopes are not just parts of the wall that protrude beyond the frame, it is the optimal combination of materials, each of which is necessary to perform a separate function. Materials are superimposed on the principle of "layer cake".

The first layer is rough. To create it are used:

Primer. It is applied to the cleaned wall surface as a pre-finish coating. Priming compositions are necessary to level the absorbent properties of the surface, as well as to improve the “adhesion” of the following materials to it.

Styrofoam. This layer is optional, but desirable in cases where the wall needs to be insulated. This is true for apartments on the lower floors and private houses.

Plaster. The primer improves the adhesion of materials to the wall, but does not level the surface. Plastering is necessary to fill in irregularities, recesses or cracks in the wall. This process is the most time-consuming and long and requires certain skills and abilities.

Alternatively, you can use an easier-to-use material - drywall. This option allows you to quickly prepare the surface for further types of finishes, but it is not suitable in all cases. In the conditions of the Russian climate, it is more often used for interior decoration or in warm regions with high humidity.

Reinforcing corners. These thin but strong metal corners are essential for protecting plaster at the corners of slopes. The front door is a place with a lot of traffic, and the corners of the opening are often hit, hit, scratched. Without proper protection, plastered corners will quickly begin to crumble and lose their presentable appearance.

Putty. With its help, all the shortcomings are leveled after the installation of the corners. Putty compositions lie in an uneven layer, therefore, after they dry, the surfaces of the slopes must be cleaned. For this purpose, fine-grained sheets of sandpaper or small power grinders are used. Furniture is also suitable if it reaches hard-to-reach places.

Re-priming before applying the decorative coating.

The second layer is the finishing, or front. There are no strict rules in choosing finishes. It depends only on individual preferences and financial capabilities. The only condition that must be met is to choose a finish that is in harmony with the door leaf and wall decoration.

What to decorate inside the apartment?

The slopes protrude both from the outside and from the inside of the door. Accordingly, there are two types of finishes - external and internal. External, as a rule, is less variable. The main focus is on the design of the door leaf, and the slopes echo either with it or with the wall decoration. More often these are practical and concise options that do not attract attention.

Inside an apartment or house, the slope decoration becomes part of the interior. She is assigned a decorative role, so the types of materials and methods of decoration are of great importance.

Finishing with facing materials from the inside is of the following types:

Surface plastering.
Bonding finishing materials.
Frame cladding.
Coloring.

For the first type, plaster, primer, water and all the necessary tools are used. This process takes a lot of time, but it makes it possible to putty all the irregularities, insulate the structure, and make a layer of the desired thickness. Decor from other materials is often superimposed on top of the plaster, but in itself it is already considered a finished finish, therefore it belongs to the basic repair techniques.

“Clean” slopes after plastering are easy to paint in any suitable color, while they are polished to smoothness or, on the contrary, left embossed.

For decoration, you can use the following materials:

Ceramic tile (tile). Differs in rigidity, moisture resistance, hygiene, low price and a wide range of colors, shapes and textures. It is easy to care for the ceramic surface, however, the tile can crack or chip off due to mechanical damage, and during the replacement process you will have to work hard so as not to damage neighboring elements.

The undeniable advantage of tiles is the many possibilities for design. The mosaic looks especially original. It can be made from whole tiles of small size or from small pieces. Mosaic fragments are obtained artificially from tiles by cutting them into pieces of the desired size, and jacks of all trades can use broken tiles for this purpose, which are considered unsuitable. The result is original and unique, and the cost of materials is minimal.

Any construction adhesive is suitable for gluing tiles. It is applied evenly with a plastic spatula, and the seams are rubbed in a day with a rubber spatula.

Porcelain tile. This material is often confused with ceramic tiles. Indeed, in the manufacture of porcelain stoneware, the same composition of the substance is used as for tiles, but the production technology is very different. As a result, the tile has a color coating only on top and becomes ugly when chipped, while porcelain stoneware has a uniform color throughout the entire thickness of the slab and damage is less noticeable on it. Also, its structure is denser, so it is more resistant to damage. In addition to being moisture resistant, environmentally friendly and durable, it also has frost resistance. In appearance, this material is more noble, but the color spectrum is very limited and its cost is higher than for ceramic tiles.

Decorative rock. It is truly an interior decoration, although it is far from always appropriate and is expensive. A feature of this material is that it can be used to simulate real masonry. It has an attractive appearance, gives zest to the interior, and is impeccable in terms of performance. The stone is not prickly, easy to clean, refers to durable and safe materials. To fix it on the surface of the slopes, construction glue is used, but there are also ways to “sheath” the surface with decorative stone.

Wallpaper. Wallpapering is perhaps the easiest and most budgetary way to decorate. It is most convenient to stick wallpaper on slopes with plasterboard trim. The glue will also “grab” on the plaster, but for this the surface will have to be leveled especially carefully so that “bubbles” do not form on the wallpaper.

Given the high traffic at the entrance to the room, it is better to choose a washable wallpaper and in dark colors.

Sheathe openings with the following materials:

MDF. Finely dispersed fraction panels are very popular in all types of finishes. They are universal for any interiors, they look aesthetically pleasing and have a number of other advantages: durability, a variety of coatings that imitate different types of wood, ease of installation, improved sound insulation and thermal insulation in the room.

Chipboard. Finishing chipboard is the easiest way to tidy up part of the doorway if, after installing the door, it looks deplorable. In this case, even a primer and putty are not needed. It is enough to sheathe the surface with even sheets, matching in tone and pattern to the door leaf.

Laminate. Laminate sheathing is widespread for two reasons: it is inexpensive and looks an order of magnitude more solid than non-laminated recycled wood materials. The basis of the coating is fiberboard or chipboard (therefore, “sew up the slopes of chipboard” means the same as laminate), and on top it is decorated with a polymer film. The most common option is the stylization of precious wood, but there are other shades in a dark and light palette. It has a number of advantages inherent in all wood-based materials, as well as certain disadvantages. So, among the most common disadvantages are hydrophobia (the material can exfoliate and swell from water) and average wear resistance.

Dobory. Sheathing of internal slopes from dobor is rather a necessity than an element of decor. Dobors are narrow plates made of different materials, which are necessary to mask slopes, the width of which is more than 7 cm. As a rule, they are used when the door and slopes must be sheathed in the same style and with the same materials.

Drywall. The choice of drywall is relevant when you need a high-quality and budget result, which is convenient to work with with your own hands. In addition, drywall perfectly levels the surface for decorative finishes in the future and enhances the insulating properties of the front door.

Plastic. No matter how versatile MDF, laminate and similar materials are, a plastic door requires the design of the adjacent space with PVC-based materials. The use of sandwich panels is especially popular. They have a variable width - from 5 to 150 cm, which allows you to cover each side of the slope with just one piece.

The performance characteristics of the product are also on top: an aesthetic appearance that persists for a long time, biostability, resistance to humidity and temperature extremes, the presence of air sections inside the panels that ensure the preservation of heat in the house, and hygiene.

Modern plastic manufacturing technologies guarantee its environmental safety and non-toxicity.

Siding. The characteristics of siding panels are very diverse, because they are made from various materials - from aluminum to plastic. Slopes are finished with aluminum, copper, wood, plinth and vinyl siding.

The best option is vinyl. It is a monolithic PVC panel, the main feature of which is flexibility. It can be given absolutely any shape, ideally adjusted to angles without joints and gaps. Vinyl is not subject to the processes of rotting and burning, is not afraid of water, does not crack at temperature extremes, is easily cleaned of contaminants, and is not of interest to fungi and insects. The front side of the panels can be plain, with a pattern, stylized as stone, wood or brick.

Frame sheathing involves the preliminary installation of a metal (aluminum) or wooden profile around the perimeter of the doorway, to which any material is subsequently attached using self-tapping screws. This method is considered the most time-consuming, since before attaching the profile, it is necessary to prime and level the slopes with cement mortar.

Some types of materials (plaster, chipboard, MDF and drywall without a decorative coating) need to be painted to harmoniously blend with the interior of the room.

For these purposes are used:

Acrylic paints. They are convenient to add to the composition for plastering the surface. This simultaneously reduces the number of finishing steps, since surface leveling and painting take place simultaneously, and makes damage less noticeable, since the entire layer of plaster is painted over;
Water emulsion. Such paints can be added to the plaster or painted on the wall over the leveling layer. When using acrylic and water-based paints, it is important to remember that they must be primed on top, otherwise the surface will get dirty. You can dilute the primer yourself from PVA and water in a ratio of 1: 5;
Latex based paints can also be used in two ways, but their advantage is that the final primer is not needed. Latex compounds are not hydrophobic and easy to clean;
Alkyd and oil. These compounds are indispensable in conditions of high humidity. They are more wear-resistant and dense, but they are more difficult to work with due to the thick consistency and toxic smell.

How to insulate?

Thermal insulation and sound insulation are functions of the front door, which partially depend on the type of slope finish. To warm the room, it is not necessary to run to the store for a heater. First you need to take care of maximum tightness, and you should start with the front door. This will not only increase the level of comfort in the house, but also help save money on utility bills in the future.

Insulation of slopes from the inside is carried out step by step:

Choice of materials. The leading positions are occupied by sandwich panels, drywall, polystyrene foam, mineral wool, polystyrene. Experts recommend choosing polystyrene, which is superior to other materials in many ways. At a relatively low cost, it is capable of thermoforming and vacuum forming, is resistant to moisture and chemical processing, does not smell, is environmentally friendly, and can be processed in various ways. If polystyrene is not available, it can be replaced with a mineral slab (wool).

Preparatory work. They include all measures to clean the work surface. It is necessary to cut off the mounting foam, remove the old coating, if any, and eliminate irregularities as much as possible. After removing the old plaster, the surface must be dusted with a vacuum cleaner and a damp sponge.

Primer and putty. It is imperative to prime the surface of the slopes. This will ensure a good adhesion of subsequent layers to the wall, as well as minimize the likelihood of fungi and bacteria on the wall. Suitable for this purpose any soil of deep action. After applying it, the surface must be allowed to dry for 3-4 hours. Reapplying primer to plaster is acceptable.

It is not necessary to putty the slopes, but it is desirable, especially if the surface has many defects, chips and depressions. All these minor gaps greatly affect the insulating qualities of the front door.

Heater installation. At this stage, it is the turn of the insulating material. Polystyrene boards and mineral wool are glued with specialized adhesives. The glue is applied with a spatula to the slab, then it is applied to the surface of the slope and adjusted to the level. The drying time of the glue is at least a day. After that, the plates are fixed with dowels.

Fixing the heater. Ideally, polystyrene or mineral boards should be covered with a plastic mesh for interior finishing. This will protect against cracks and bumps in the future. The glue is applied to the mesh in layers, each layer dries to hardness in 6-12 hours.

Surface leveling. Here again, putty is needed. You can level the surface up to 2-3 layers. Then you need to let it dry for the time indicated in the instructions on the container, and process it with fine-grained sandpaper. The grain number on the sandpaper package is at least 100.

Final finishing. It includes the application of a colorless primer, followed by painting or any other decoration method.

It is important to consider that finishing materials have not only their own characteristics that affect thermal insulation, but also their own weight. It is necessary to calculate in advance whether the insulated slope will withstand, for example, the weight of porcelain stoneware or wall paneling, or whether paint, plastic, wallpaper should be preferred.

How to make a slope on the front door from MDF panels with your own hands, see the next video.

Colors

Slopes are a small detail that can both support the style in the interior and completely break out of it. The inappropriate color of the finish will become an element that violates the integrity of the overall picture, so it is important to choose the right color in accordance with the design of the door and the decoration of the walls, floor and ceiling in the room.

To increase the space, as well as just for aesthetic purposes, door blocks are removed on interior partitions. During the redevelopment of the apartment, most often they equip a free passage between the hallway and the hall. No less popular is an opening without a door, which combines the kitchen with the living room. The expansion of space occurs due to getting rid of the dead zone reserved for opening the sash. However, redevelopment creates a new problem associated with the design of a doorway without a door, which is sometimes difficult for the owner to solve.

In the house, not every opening can be left without a door. The open passage of the bathroom or pantry will look ridiculous. The secluded area is considered to be the kitchen, bedroom and office, but there is an exception to the rule for these rooms. To organize intimacy, the openings are finished with curtains, sliding screens and other similar devices. As a result, a visual illusion of separation of rooms is created, while the space remains without a dead zone.

Open passages emphasize the integrity of the living space. All openings are made of the same shape and decorated with material similar in structure to form a single ensemble.

They get rid of the door leaf when making an opening between the kitchen and the living room, or when one of these rooms is connected to the hallway. However, it is desirable to provide visual separation at least with curtains.

If a gas stove is installed in the kitchen, for safety reasons the room will have to be fenced off with at least a sliding system.

Free passage is arranged when combining a hall or kitchen with a balcony. The process involves the simultaneous removal of the door and window frames. If an office or a small bedroom is set up on the balcony, the rooms are separated by curtains or a screen.

When we are not talking about fencing off a kitchen with a gas stove, the passage is often decorated with shelves. Curly flowers, figurines and other elements are placed on decorative shelving.

Getting rid of the door not only expands the space. Air circulates freely through open passages. Even in a small apartment in the summer it becomes fresher.

When making an opening, doors are not required in the following cases:

A modern solution for redevelopment is an interior portal that allows you to save the rectangular shape of the opening. Without a door, the passage becomes freer, and the decoration of massive decorative elements gives aesthetics.

Arched passages are popular. In an apartment with high ceilings, they prefer the classics, equipping the opening with a semicircular configuration. For a building with low ceilings, it is desirable to visually raise the walls with an elliptical arch.

The door block is abandoned by owners who like irregularly configured aisles. When decorating, asymmetric arches, triangles, trapeziums are in demand. A rectangular portal looks beautiful, the corners of which are rounded at different radii. The only negative is the limitation of the passage size. It will not work to make an opening if its width is less than 80 cm.

Doors are abandoned when decorating the passage with a bar counter, stained glass elements, and mosaic fragments. Often such techniques are appropriate for studio apartments.

Advantages and disadvantages

If you compare a beautifully designed open opening with a door block, you will be able to identify a number of advantages:

The integrity of the space of the combined rooms is created. The apartment becomes free, bright, while maintaining the functionality of each zone. The kitchen remains the kitchen, the living room remains the living room.
When framing the doorway, materials that do not require complex maintenance are used. The absence of a sash eliminates the loosening of the box, the formation of a dead zone.
Without a door leaf, the opening can be given an original configuration that allows you to emphasize the style of the interior of the entire room.
Making an interior portal even with the most expensive materials will turn out to be more cost-effective than installing a high-quality door block.

The disadvantage of an open passage is the impossibility of using it for and a pantry. With any type of design, a passage without a door is not able to provide the intimacy of a specific purpose area.

Free ventilation through open openings will bring great inconvenience when combining the kitchen with living rooms. Smells during cooking, along with fat vapors, will spread throughout the apartment.

Forms

You can design the opening while maintaining the original configuration or modify the passage. Often the shape of the structure depends on the materials used for finishing. An important role is played by the skill of the master.

Of all types of doorways, the simplest option is the classic rectangular shape. To assemble such a structure is within the power of an inexperienced person. To design the opening, the entire door block is removed along with the frame. The ends of the walls along the contour are trimmed with decorative cladding. If it is difficult to dismantle the boat, only one leaf can be removed. Sheathe the remaining elements of the frame with MDF or plastic. The disadvantage of this method is the narrowing of the doorway due to the remaining elements of the box.

In the case of arched openings choice of forms huge:

Considered a classic semicircular arch. The transition is suitable for combining any rooms. If the apartment has low ceilings, it is better to refuse a semicircular arch or expand the passage.

arches trapezoidal forms are easier to manufacture, suitable for apartments with low ceilings, often installed when combining a kitchen with a living room. However, designers rarely use a trapezoid due to its association with the shape of ritual accessories.

Fans of unusual configurations prefer triangular arches. The design has many subspecies, more suitable for spacious rooms with high ceilings.

Modern apartments are increasingly equipped with doorways asymmetric forms. The design is easier to make from drywall. For decoration, LED lighting is used, niches, shelves and other decorative elements are equipped. Asymmetric designs allow you to hide large defects in the passage and the interior partition itself.

How to decorate a doorway?

When making an opening without a door, almost any material used for wall decoration is suitable. A budget option is a drywall construction, followed by painting or wallpapering. It is optimal to choose a GKL in the manufacture of an asymmetric device. Plastic or MDF will be cheap.

Of the more expensive materials for decorating the doorway, artificial stone, tile, and precious woods are used. The pinnacle of art is the decoration of the passage with stucco.

When choosing the option of finishing a doorway without a door, one must take into account the style of the entire room. The design should harmoniously fit the passage into the interior, and not highlight it as a separate design.

The portal in the apartment is equipped with two types: full - with a top and side elements, two-sided - only side faces without a top. Similarly, they provide for the installation of a threshold and platbands or refuse these elements.

Installation of slopes and plasterboard arches

If you decide to arrange a doorway without a door with your own hands in the form of an arch, it is better to use drywall for decoration. Sheets are inexpensive, easy to cut and install. In the manufacture of the arch, a frame is assembled from a galvanized profile. The structures give the shape of the future opening. The frame is sheathed with fragments cut from GKL sheets. Fixation takes place with self-tapping screws. The finished arch is treated with a primer, a perforated corner is glued, puttied, and after drying it is sanded.

If there is no desire to build an arch, the slopes are simply lined with drywall. To further refine the doorway, water-based paint is used or wallpaper is glued.

How to trim a doorway with stone?

The decoration of the portal with a decorative stone looks stylish. The material is made of natural crumbs with the addition of coloring pigments and polymers. When framing an opening, they rarely adhere to even boundaries. Most often, preference is given to torn edges. To aesthetically decorate the doorway inside the room, use a stone with a small, almost smooth relief pattern. Elements with a deep texture create a bulky design. They are used to finish the openings of the entrance doors from the side of the street.

Decorative stone cuts well, but for corners it is better to use ready-made corner elements. Installation is carried out with an adhesive solution for tiles or liquid nails.

Finishing with dobors and platbands

Simply and tastefully, it will turn out to finish the rectangular doorway and made in the form of planks. Elements are made of wood, MDF or plastic. The latter look less aesthetically pleasing.

From MDF there are ordinary ones, with an edge at the end and telescopic ones. In the first version, the edge of the plank is without a decorative coating. Joints need to be tight. Edge trims have a finished look. The end is sealed with a decorative film and in case of flaws, the joints look presentable.

They produce flat, rounded and other shapes. Wooden planks can be decorated with carvings. Installation of elements is carried out on glue, nails or self-tapping screws. Telescopic architraves are fixed with a lock to a pre-fixed bar.

Finishing the interior opening MDF

MDF panels will turn out to be a beautiful and inexpensive finish of the portal, only platbands are still selected from a similar material. The disadvantage of facing is the fear of dampness. It is better not to use MDF for decorating the passage connecting the kitchen with the living room. If a good exhaust system is organized above the oven, then dampness does not threaten the material.

To sheathe an MDF doorway, first a frame is constructed from wooden slats. The panels are cut to size and fixed with special metal clips. Between themselves, the planks are joined with a tongue-and-groove locking connection.

MDF panels without locks are planted on adhesive solutions. The frame is not built. For gluing the planks, a perfectly flat surface is prepared. The joints are closed with a decorative strip, and the edges of the passage are framed with platbands.

Decorating a doorway with plastic

The principle of ennobling the opening with plastic is reminiscent of finishing with MDF panels. Only the material is different. PVC plastic panels are fixed to the frame with fastening clips or glued. The frame is completed by a trim made of a similar material, which is attached to the guide bar.

PVC panels trim the doorway of a rectangular, semicircular and other configuration. Ready-made kits for lining arches are sold in stores, you just need to choose the product according to the size of the passage.

Advantages of polyurethane stucco

Gypsum stucco is rarely used because of its fragility and heavy weight. If the apartment has high ceilings, and a Venetian or other similar style is chosen for decoration, then the decoration of doorways is carried out with polyurethane elements. The material is not fragile, light, can be painted.

For the installation of such stucco, a flat, durable surface is prepared. Pre-treatment with a deep penetration primer. The elements are fixed with an adhesive mixture. After the glue has hardened, the joints are puttied and then sanded with sandpaper.

wood finish

Lovers of natural materials prefer a wooden portal lined with trims and platbands. When making a door portal with your own hands, you can even use cheap pine wood. After good polishing, treatment with protective impregnations and varnishing, the material will be difficult to distinguish from valuable wood. You can decorate the wooden portal of the doorway with a carved ornament.

The elements are being installed on the frame. First, flat planks are fixed to the slopes, then trims are installed. The facing of the doorway is fixed with self-tapping screws. Hats are recessed in drilled secret holes, and rubbed with putty on top. I glue the platbands, fix them with nails or self-tapping screws.

curtain decoration

A simple option to decorate doorways without a door is to hang curtains. The whole process consists in fixing the cornice over the passage. Curtains will hide the opening without a door from the field of view, divert attention, do not clutter up the space. The main requirement is not to use curtains with horizontal opening. They will become an obstacle in the free passage. It is optimal to use curtains for doorways with vertical closing. When open, the curtains are tied to the wall.

If you make every effort, decorating a free interior passage will turn out better than a door block. If expensive materials are used, it is advisable to take the advice of specialists so that the costs are not in vain.

When repairing small apartments with narrow corridors, the door to the kitchen is increasingly being abandoned. An open entrance allows you to visually increase the space and save space. At the same time, there remains a partition that performs the functions of zoning.

In large private houses, a beautifully finished entrance to the kitchen from the hall or living room can be a work of art and interior decoration.

A wide span can be so functional.

After dismantling the door frame, the entrance from the corridor and other adjacent rooms, such as the dining room or living room, can be decorated with various materials and different shapes. But at the same time, you need to remember a few important points.

It is forbidden:

Dismantle the door in the gasified kitchen. In this case, the claim for a fine may be from the gas service. Here the door is necessary for your own safety. Gas stoves in the kitchen were common in old-built houses; in modern apartment buildings, mostly electric ones are installed.
The expansion of the opening is a redevelopment, which entails changes in the technical documentation. Be sure to coordinate such work with the BTI and other authorized services.

It should also be taken into account that the expansion of the entrance will require the installation of a more powerful hood. Especially if the kitchen opens into the living room. Otherwise, odors will freely spread throughout the apartment.

An open doorway is a better idea if there is a corridor between the kitchen and other rooms.

Entrance to the kitchen in Khrushchev

When entering the living room, you may need not only a powerful, but also a quieter hood so as not to interfere with the rest of the guests.

Examples of the most successful design options

In the decoration of an open opening, there are practically no restrictions on the choice of materials.

It can be a design under a stone, a brick.

You can finish the span with the same materials as the walls.

You can use gypsum plaster to create a semblance of stucco.

It is necessary to take into account the possibility of caring for the surface, especially if the entrance is located next to the stove or sink.

Here are a few solutions on how to design a doorway without a door to the kitchen.

Trimmed rectangular opening

The most versatile and easiest option. After dismantling the door frame, the span to the kitchen is left the same shape.

Or they can be highlighted with plastic or wood panels, lined with wallpaper or decorative plaster. The choice of materials depends on the style of the interior.