Russia, Moscow region, Moscow +79041000555

How to effectively and easily descale an electric kettle?

It takes ~ 2 minutes to read

Among the electrical appliances working in the kitchen, the electric kettle occupies an important place. One day there comes a moment when plaque appears in the teapot. After that, the operation of the heating element is disrupted, a smell appears. In order to prevent this phenomenon, the inside of the electric kettle is regularly cleaned. How to descale an electric kettle using available methods, we will discuss in more detail.

Save

What is limescale?

Usually, tap water is boiled in an electric kettle, which has a high hardness due to salts. When the water boils, carbon dioxide and a calcified mixture are formed. It creates plaque on the interior surfaces. Even the water that has passed through the filter forms a sediment, because it is impossible to remove the salts 100%.

Save

If the deposits are not removed in a timely manner, then the following consequences are possible:

• The heat output of the heating element is reduced - the water will heat up longer, the energy costs will increase;
• Drinking water with sediment leads to exacerbation of chronic diseases.

Housewives use methods known for a long time. However, there are some peculiarities for electric kettles. It is important to remember that if you use an untested method, the effect will be the opposite, and the kettle will have to be disposed of. Before proceeding with the removal of limescale deposits, the internal condition of the kettle is inspected. Models made of plastic are not treated with chemical solutions. An open spiral will lose its protective layer during cleaning and begin to rust.

Save

• Family members are warned about cleaning up;
• Before cleaning, water is poured, and then a cleaning composition is added;
• Cleaning is completed by thorough rinsing with running water;
• Deposits must not be removed with sharp objects or abrasive powders;
• For heavy precipitation, several cleaning methods are used.

Helpful hints:

1. Cleaning is carried out regularly, since it is impossible to get rid of deposits once and for all, because this is a natural process of heating water.
2. The limescale will be less if you soften the tap water, for example, filter it before filling the kettle.
3. For cleaning, formulations are selected that have fewer side effects, for example, citric acid.

How to clean an electric kettle with folk remedies (including glass)

Typically, deposits appear on the bottom and walls of an electric kettle. Experienced housewives know how to reduce their appearance, and if they appear, then how to get rid of them (glass models are no exception). First of all, it is not recommended to use sharp objects for scraping. Here are some of the ways to clean your kettle from limescale deposits at home.

How to clean an electric kettle with lemon and citric acid

A crystalline white powder intended for culinary purposes is known as citric acid. The powder comes on sale in the form of packages weighing up to 50 grams. It is known that calcium deposits are destroyed in an acidic environment. This is the principle behind the cleaning of an electric kettle.

Save

It is produced in this way:

• The container is thoroughly washed to remove delamination;
• Water is poured in 2/3 of the volume, a bag of powder is added;
• The solution begins to boil. After boiling, the water boils, large particles of sediment exfoliate. With a small layer, 15 minutes is enough to clean the inner surfaces;
• The boiled solution is drained, the surfaces are wiped with a soft sponge;
• At the final stage, the water is boiled twice without powder.

Advice:

1. Do not pour the powder into boiling water, as foam is formed due to the reaction.
2. The cleaning performance will improve if the solution is left overnight.

If citric acid powder is not available, then freshly squeezed juice will do. In this case, the removal of the sediment is carried out in the manner described earlier.

Save

Cleaning with lemon slices is easier:

• The lemon is cut into wedges that fit into the bottom of the teapot;
• The water should boil for up to half an hour and then cool;
• The cooled water is drained, and the removed scale is removed with a soft sponge.

Disadvantage this method is that it is effective only for light scale.

Baking soda

Baking soda or baking soda is found in every housewife's kitchen cupboard. It is used not only as a food additive for cooking, but also as a medicine. Its special property is related to its effect on the sediment.

Cleaning is performed in the following sequence:

• A liter of water is poured, soda is poured. Three tablespoons are enough;
• The solution is boiled for half an hour, and then it cools down;
• The cooled water is removed, the inner surfaces are wiped with a sponge;
• The kettle is washed, filled with water, heated.

Vinegar and essence

Fermented raw materials are distilled into acetic acid. After dilution with water, acetic essence is obtained from the acid with a concentration of up to 80%. Table vinegar of the desired concentration is obtained after diluting the essence.

Removal of precipitation with solutions is carried out in the following sequence:

• A filled teapot is poured into half a glass of table 6% vinegar or 2 tablespoons of essence;
• After boiling, the solution cools down for 4 hours. If the scale is very large, then it is better to leave the solution overnight;
• The vinegar solution is removed and the kettle is rinsed thoroughly. The unpleasant smell goes away after long airing.

Can i wash my electric kettle with carbonated drinks?

Most carbonated drinks contain acid. For example, lemonade contains phosphoric acid. To use it, you must choose a colorless drink, otherwise the inner surfaces will be colored.

To wash in this way, do the following:

• A liter of soda is poured into the kettle;
• Lemonade is brought to a boil, cooled;
• After a while, the drink is drained and rinsed with clean water.

Advice!In case of light contamination, it is enough to pour lemonade for several hours, and then clean the surfaces with a sponge.

Oxalic acid

Some plants (spinach, sorrel) contain an acid called oxalic acid. It is a colorless crystalline powder, almost completely soluble. It is sold at hardware stores. High efficiency of the powder for cleaning deposits is noted. Care must be taken when working.

Cleaning is done by the following method:

• A little powder is poured, water is poured;
• The solution is boiled, settled for several minutes;
• Dissolved deposits are removed with a sponge, followed by a thorough rinsing.

Advice!Light limescale can be washed off with fresh sorrel leaves. Due to the low percentage of oxalic acid, the solution is boiled several times.

How to clean limescale in an electric kettle with household chemicals

When folk remedies fail or it is necessary to achieve a quick effect, household chemicals come to the rescue. Usually, the rules for using chemical compositions are indicated on the packages.

The resulting solution is boiled for up to half an hour;

After a short settling, the dissolved scale is drained;

The inner surface is thoroughly washed, after which water is boiled several times.

The most common household chemicals are Antinakipin and Cinderella. As a rule, during the first use of chemicals, the scale flakes off and falls off in pieces. Cleaning ends after several rinsing of the inner container.

Save

Advice:

1. Cleaning agents can be harmful to health, so it is better to avoid large deposits in order to cope with folk methods.
2. It is necessary to use household chemicals after carefully studying the instructions. Adherence to the dosage of the drug requires special attention.

Prevention of limescale

An electric kettle can be protected from scale formation for a long time if simple rules are followed.

1. A model with a closed spiral or with a disc is purchased, since in this version the cleaning is simpler and more efficient.
2. Running water, which has a high hardness, is not poured. Only settled, melt or spring water is boiled. In addition, the installed filter reliably protects against all impurities.
3. The minimum required amount of water is boiled. Unused boiling water is drained, fresh water is collected.
4. Rinsing is performed before and after boiling.
5. Surfaces are daily wiped with a sponge.
6. Cleaning is carried out regularly (regardless of the amount of limescale).

So, an electric kettle can be protected from scale in different ways. Each method has advantages and disadvantages.

An enamel teapot is a very beautiful, convenient and most common type of kitchenware. Even if the kitchen has a home water filtration system, it is completely impossible to avoid solid deposits on the walls and bottom inside the kettle.

The filter significantly reduces the concentration of impurities and calcium and magnesium salts, but over time, in the process of heating the water, an insoluble precipitate is still formed, causing the quite expected question - how to remove scale in an enamel kettle.

When heated for the first time in a vessel, the salts contained in the water precipitate and first form a loose base. With each further boiling, it thickens more and more, creating a strong layer of plaque.

The most important argument is taking care of your own health. The smallest particles of sediment, falling into the cup, and then into the body, clog the intestines and lead to many unpleasant diseases.

How to descale an enamel teapot

The problem is quite common and was relevant many years ago, when there was no question of filters designed to purify water.

Today there are three answers to the question of how to descale an enamel teapot:

• Mechanical method;
• The use of special tools for cleaning devices;
• Use of valuable knowledge for cleaning at home.

Mechanical - at first glance, the easiest way to remove formations using a metal brush and cleaning pastes. With sufficient intensity, mechanical action will remove even the most stagnant layer of solid deposits.

This method is not without its disadvantages:

• The process of exposure takes a lot of time and requires a lot of effort;
• Together with the plaque, the coating is also removed, forming cracks;
• In the future, the scale in these defects will be fixed more firmly, and it will be more difficult to remove it.

The household chemistry departments are full of a variety of cleaning agents, the instructions of which clearly describe how to descale an enamel teapot. As a rule, the names speak for themselves - "Anti-scale", "Anti-scale" and others. In the composition of these powders - acids, by means of which the solid sediment is removed. Using them is simple by following the instructions on the packaging.

Homemade recipes

Lime deposits are successfully removed with natural remedies that can be found in the kitchen of every housewife:

1. Lemon acid;
2. Vinegar essence, table vinegar, apple cider vinegar;
3. Baking soda.

Citric acid is an amazing assistant in how to descale an enamel teapot. Excellent solubility, lack of toxicity and effective removal of hard deposits makes the crystalline powder the leader in home remedies for descaling. You can use the same products to descale your electric kettle.

To do this, dissolve five tablespoons of citric acid in two liters of water, and bring the solution to a boil. It is not necessary to boil, and after 15-20 minutes you should make sure that the process of detaching the plaque is successfully completed.

If the desired result is not achieved, it is necessary to clean again with citric acid. Before draining the old solution and rinsing the kettle, it is necessary to cool the vessel, otherwise the enamel will crack.

After all solid deposits have moved away from the walls and bottom, it is required to wash the vessel with a soft sponge and the loosened particles (if any) are easily removed. In order to remove the remains of citric acid, you need to boil clean water 2-3 times.

Vinegar - works in a similar way. Acetic acid actively breaks down solid deposits.

• For 2 liters of cold water, you will need a glass of 9% vinegar;
• Leave the mixture for half an hour;
• Then bring to a boil and boil for 5-10 minutes;
• Rinse the kettle thoroughly under a strong stream;
• Boil fresh water several times "empty".

The only drawback of vinegar is its strong specific smell. But at the same time, you can also clean the stainless steel kettle

Vegetable peel

The potato peel contains a large amount of organic acids, even more than the tuber itself. It is the peel that helps to solve the problem of how to remove scale in an enamel teapot.

To do this, cleaning from two fruits is put into a vessel, poured with water and boiled over low heat for 1-1.5 hours. It should be noted that the deep layer of solids will only soften slightly, but will not completely dissolve.

Apple and lemon peels are used for the same purpose.

Some people recommend using carbonated drinks (Coca-Cola, Sprite, etc.) instead of these funds. They are really able to cope with a small layer of gray plaque, and all because carbon dioxide is added to the composition to form weak carbonic acid.

The concentration is low, so this method is irrational, due to the high cost of drinks.

Cleaning an enamel teapot from scale using any selected method is carried out in several stages and continues until a satisfactory result is achieved.

The cleaning procedure should not be delayed - this will be a good preventive measure.

It is more expedient to wash the kettle every two weeks and spend 5 minutes on it, rather than then deal with old, deeply ingrained scale.

How to deal with old limescale?

Let's figure out how to descale with soda. Soda in this case will become one of the stages in the fight against outdated plaque. She will not completely remove it, but will only soften the stubborn areas.

• Pour water into a kettle and bring to a boil;
• Add 2-3 tablespoons of baking soda;
• Stir and let cool;
• Bring to a boil again and drain off the water;
• Without rinsing, pour in a new portion of water and add two teaspoons of vinegar essence or a bag of citric acid;
• Let stand for 30 minutes.

After such a procedure, solid deposits easily move away from the walls and bottom. To achieve maximum effect, wash the kettle with a soft sponge, rinse well and boil clean water 2-3 times in it.

Video on how to descale an enamel kettle

All my greetings. Every housewife dreams of having a clean teapot that pleases with a pleasant tea party. But scale is often deposited on its walls. Today we will learn how to descale the kettle.

Why scale is dangerous and why you need to get rid of it

Scale is dangerous because penetrating into our body, it harms it, although we may not immediately notice it. Scale in a teapot is salts, harmful impurities and insoluble metals.

If over the years they enter the body, then a person may develop osteochondrosis, gout, kidney stones and other misfortunes. Even if you pass water through a filter, salts will still remain. The best water for boiling is spring or bottled water.

Purification methods

Plaque on the sides of the kettle can be removed. Many housewives try to buy the most expensive products in the store, even realizing that they are causing great harm to their health. Wouldn't it be better to find ways to make any dishes shine at home?

Cleaning won't take long. It is enough to clean the dishes once a month so that the plaque recedes for a long time. If the water is very hard, you will have to do this twice a month. If the layer is small, then the easiest way is to cleanse with citric acid:

• Fill the kettle with cold water, 2/3 full.
• Add 1 tbsp. l. acid per 1 liter.
• Boil for 5 minutes.
• Wait until it cools, then drain the water.
• If the plaque has not disappeared, try again.

But citric acid is only suitable for electrical products, as well as stainless steel or glass. The coating of enamelled and metal products can deteriorate.

For simple and electric kettles made of stainless steel or glass lemon peel is suitable. Lemon can remove plaque of any thickness:

• Cut the lemon into small slices, put in a container.
• Pour water 2/3 of the container, put on fire.
• Reduce heat after boiling.
• "Boil" the lemon for 30 minutes, then let cool.
• Drain the water, remove the remaining layers with a soft sponge.

Metal kettle can be cleaned with vinegar, but it is better not to touch the electric one:

• Pour in water as well.
• Pour in vinegar - 0.5 cups per 1 liter of water (essences - 3 tsp per 1 liter of water).
• Boil, let it brew for 1 hour, then drain.
• Before boiling water for tea, boil and drain twice to remove the vinegar smell.

This method will quickly and efficiently remove any layer, but you need to rub it with a sponge, achieving a perfect shine.

Scrubbing with vinegar will spread an unpleasant odor around the room. Do not forget to open the window or turn on the hood.

A delicious drink will help in the household: Coca-Cola for descaling

This is a Coca-Cola drink that contains the acid we need. To clean with Coca-Cola, you need to take enough liquid so that it covers the bottom with a sufficiently large layer. Then boil and leave for 1 hour for the acid to eat away at the precipitate. After this procedure, wipe the bottom and walls with a sponge. Sprite and Pepsi will do.

If the kettle has been in disrepair for a long time, then this procedure must be repeated 2-3 times. This drink cleans up an electrical appliance well.

Almighty Soda

Wherever soda is not used! It heals and makes baked goods fluffier and tastier. It will also come in handy for descaling. This powder can be used to clean both electric and enamelled vessels.

The advantages of cleaning with soda include its cheapness and safety. There are also disadvantages. Soda can scratch the surface of the product.

Procedure:

• Pour water up to half of the container.
• Pour in 2 tbsp. soda.
• Boil for half an hour, let cool.
• Wash the inside with a sponge.

Vinegar and soda... With these ingredients, you can bring an enamel and metal kettle to shine, it is better not to touch the electric one.

1. First, boil water and baking soda for 25-30 minutes, 1 tbsp. l. for 1 liter of water.
2. Pour out the liquid, fill in a new one.
3. Pour in 0.5 cups of vinegar per liter. water, boil again for 30 minutes.
4. Wipe inside with a sponge to remove any lingering plaque.

Method for all types of dishes, except for electric ones. Baking soda, vinegar, and citric acid will help get rid of old limescale. You will have to boil the dishes three times, first with soda, then with citric acid, then with vinegar. Proportions as above.

Cleaning up

Hard salts will help clean up apple or potato peels. It turns out that they also contain acids that can cope with plaque. You can put potato, apple and pear peelings together.

If you notice salt deposits inside the new dishes, then put cleaners in it, fill it with water, put on fire for half an hour. But this remedy will not help with thick scale.

For all types of tea utensils, you can use pickle from cucumbers, where there is vinegar or citric acid. Just fill the container with brine, keep it on fire for 30 minutes. This is a simple way our grandmothers used.

A glass teapot will work well with lemon juice and soda. Pour in water, pour in 2 tbsp. lemon juice and 2 tbsp. l. soda, boil for 15 minutes. Pour out the water, wipe the inside with a soft sponge. Citric acid is suitable instead of juice.

The best cleaning products for a thermos kettle

Thermos kettle will take more electricity if it is not periodically descaled. In addition, you will feel a salty taste of water, the device will make a lot of noise during operation. If cleaning is neglected, the device may simply burn out.

Soda and citric acid are best.

1. First add 1 tbsp. soda, boil, wait for the liquid to cool.
2. Drain the solution, refill with new water.
3. Put 1 sachet of citric acid, boil again, leave to cool, then drain the solution.
4. Pour in clean water, bring to a boil, then pour. The device is now ready for use.

Can be cleaned with vinegar essence. Take 1 liter. water 50 ml of essence, bring to a boil, leave to cool. A good method is to cleanse with a colorless Sprite as described above.

Ceramic appliance can also be cleaned with the above described means.

Simple ascorbic acid will also help to achieve a shiny interior. For 1 liter of water, 1 tbsp is enough. l. ascorbic acid. This is a safe but effective method, especially if the inside is heavily contaminated.

With slight contamination, you can simply pour soda into the water and hold it for several hours. After each cleaning, the first boiled water must be poured out in order to remove the remaining lime. This applies to all types of tea ware.

Plastic teapot best cleaned with ascorbic acid and baking soda. The technique is described above.
Try using citric acid to polish an aluminum appliance. Pour in water, add 1 tbsp. citric acid, bring to a boil, let cool.

External surface cleaning

Stainless steel dishes can be easily brought to a shine from the outside using folk remedies.

The simplest remedy is toothpaste.

1. Take an old toothbrush that has lost its hardness.
2. Squeeze toothpaste onto it.
3. Wipe the entire surface of the appliance.
4. Rinse first with warm, then cold water.
5. Pat dry with a towel.
6. Pour water into the kettle, warm it up a little, polish the warm appliance with a soft towel.

If the contamination is large, squeeze the toothpaste onto the hard side of the sponge and gently rub the surface. Do not apply strong pressure to avoid scratching. With scratches, dishes will become dirty more often and more difficult to clean. If the kettle is burnt on the stove, it will most likely have to be thrown away.

Another way to achieve shine is to boil in water for 30 minutes, add salt and soda - 1 liter, 1 tbsp. spoon. It is important that the kettle is completely submerged in water. Then wipe it off with a soft sponge.

Another way:

• Pour 3 tbsp into the heated water. spoons of baking soda and;
• Dip the dishes into the solution;
• Boil for 5 minutes, leave to cool;
• Rinse with water, buff with a towel.

It is better not to bring a stainless steel device to pollution. Polish it after each boil. If there is no time for cleansing procedures, it is better not to buy such dishes.

Enamel teapot can be cleaned with regular baking soda, but do not rub hard so that there are no scratches. Simple soap is the best remedy. Lather the sponge with soap and go well over the surface, then rinse with warm water. If the dishes are not started, this method will prevent your dishes from getting very dirty.

The aluminum kettle can be cleaned with. Rub 15 charcoal tablets into powder, moisten the walls of the container, apply the powder, hold for 1 hour, then rinse with water, dry with a towel.

Detergents for descaling

There are enough detergents in stores to help clean any kettle on the outside. The main thing is that they do not fall into the dishes.

When working with detergents, it is better to wear gloves, do not touch your eyes.

Dear friends, you have learned many ways to clean dishes, use them and drink pure delicious tea!

Limescale always appears on the inner walls of the kettle, regardless of whether it is electric, metal, or covered with special enamel. Even if you use special filters for water, or use only purified water, scale still appears on the inside of the kettle. Its presence reduces the quality of the water that is boiled in it.

If we are talking about an electrical device, then it accumulates directly on the heating element, which leads to a rapid breakdown of the equipment. If the container is made of metal, not only scale, but also rust will get into the water.

Today, most of the kettles in use run on electricity, so it is important to know how to descale an electric kettle.

Water is one of the most essential products for a person, without it we cannot live even weeks, but it can also contain many harmful substances and harmful organisms. To fight the latter, people began to boil water long ago, but this process does not allow removing salts and other impurities. And the water that comes from the water supply contains a lot of such substances, and the more there are, the more "hard" the liquid will be.

Excessive amounts of salt are harmful to the body, so the fact that they remain on the walls and / or the heating element can be beneficial for a person, but over time they become too much. To prevent scale formation in the electric kettle, filters can be used, but they cannot completely eliminate the salt content in the water.

Negative effects of limescale in the kettle:

• breaking;
• water pollution;
• harm to the body, in particular to the organs of the urinary system.

That is why it is important to know how to descale an electric kettle and not neglect its cleanliness.

Prevention

Certain measures allow, if not completely eliminate the formation of scale on the surface of the heating element, then at least significantly reduce the rate of formation. There are several simplest ways to prevent:

• wash the kettle daily, a thin plaque is easy enough to remove using an ordinary sponge, while a thick one will have to be removed with difficulty;
• use filtered water, you can also buy pre-purified water;
• drain excess water after each boil, leave the kettle empty at night;
• notice the need for cleaning in time, the thicker the layer is, the more efforts will have to be made to clean it.

You can simplify maintenance already at the purchase stage by making a choice in favor of an electric kettle, in which the heating coil is closed from contact with water, or a disc is used for heating.

Descale the electric kettle with home remedies

Scale is susceptible to various substances, and the practice of cleaning electric kettles implies both the use of special products and folk recipes. Active substances dissolve and remove scale, some of which are readily available and are sold even in regular grocery stores. These include:

• vinegar;
• lemon acid;
• soda.

Descaling can be done in different ways, and the most harmful to technology will be mechanical. Do not attempt to remove plaque using hard or sharp instruments as this will further ruin the device. Damage to the case or heating element will be irreversible, and after they appear, all that remains is to get rid of your electric kettle. You should not resort to the mechanical method, when the layer has become very thick, only preliminary processing of the hard (but not metal) inner surface with a washcloth is allowed.

Citric acid

Of the acceptable descaling agents for an electric kettle, citric acid is one of the mildest. When preparing the composition for processing, it is necessary to dissolve 10 grams of citric acid in a liter of water. It is sold in regular grocery stores, usually in 25 grams.

To make the calculations simpler, it will be enough to pour the contents of one sachet into one full teapot. After the finished solution is in the electric kettle, you must turn it on.

Do not leave the device unattended, as soon as the liquid is brought to a boil, it must be turned off, otherwise the boiling water will begin to foam and splash out through the top.

After completing this simple procedure, the hot solution must be left inside for 15 minutes. This time will be enough for the acid to dissolve the scale, or reduce its thickness.

After the procedure, the solution is poured out, it cannot be used for other purposes, and the kettle itself is rinsed so that the residues of active substances do not get into tea or coffee in the future. If the layer was too thick, you can repeat the descaling procedure with citric acid.

Under the influence of citric acid, the scale is converted into a loose gray precipitate, in addition, the liquid will contain small pieces of lime in the form of plates. Alternatively, you can use the lemons themselves instead of the powder in the store.

For effective processing, it will be enough to place 1-2 lemons inside the device, cutting them into circles. The effectiveness of this method is no less high; at the same time, a strong lemon scent will burst into the room along with the steam.

Vinegar

The second way to remove scale from an electric kettle involves the use of vinegar, popularly called the "grandmother's" method, if only because it has been used for a very long time.

Initially, vinegar was used against scale on copper kettles, however, it may be quite enough for modern electric kettles. The procedure requires the usual 10% solution, which is available in every kitchen.

Mode of application:

1. The kettle fills two-thirds with water and the last third needs to be filled with vinegar.
2. The resulting mixture must be boiled, and then leave the device and wait until it cools down. During this time, the scale layer should dissolve, or significantly decrease.
3. After the procedure, it must either be repeated, or the kettle must be thoroughly rinsed several times with hot water so that no vinegar remains on its walls, which can spoil the taste of any drink.

Acetic acid is an effective reagent for removing scale, due to a chemical reaction in which it enters with salts, the latter are decomposed into the simplest substances. For an ordinary electric kettle with a volume of one and a half to two liters, you will need two glasses of vinegar. This method also has a significant drawback - the smell.

After the procedure, a stable vinegar aroma will reign in the kitchen, which will not seem pleasant to anyone, so you should take care of airing in advance.

Soda

If you need to remove very serious dirt, the effect of acetic acid can be supplemented with soda. First, a concentrated soda solution is boiled in an electric kettle, and after that we immediately fill the technique with vinegar and water (1: 2) in such a volume that the active liquid completely covers the heating element. As a result, a very violent chemical reaction will appear, accompanied by the release of carbon dioxide. Bubbles will begin to form and break down the thick layers of limescale.

The method of cleaning an electric kettle with soda from scale, in fact, is not independent, it is used so that soda particles eaten into plaque when boiling water, so that then, after violently reacting with acid, to provide mechanical removal on the surface of the heating element by means of emitted bubbles of carbon dioxide ... Two tablespoons of baking soda will be enough for one liter of water.

Other ways

In addition to the three "kitchen" substances, other rather unusual methods can be used for cleaning:

• Brine. The brine left after pickled cucumbers or tomatoes can also be used for this purpose, because it contains citric acid. By boiling an electric kettle with brine, you can also successfully clean it of plaque, the procedure is exactly the same - pour the brine, boil, wait until it cools, pour it out, and wash the container. Cucumber pickle can also remove rust.
• Soda. Quite an unexpected way to descale kettles. Coca-Cola, Pepsi-Cola, and other similar drinks also help to cope with scale, since they contain phosphoric acid, which can cope even with a fairly thick layer of scale. It is not necessary to boil the water at all, you just need to leave the electric kettle with soda for several hours. It is important to use only high quality drinks, as they contain persistent colorants that do not remain on the walls. If the teapot is white, then the drink used should not have a dye, otherwise the paint will still have to be removed.
• Oxalic acid. This substance is not often found on the farm, but it is no less effective than the aforementioned remedies. If it is not in its pure form, you can use a fresh bunch of freshly cut sorrel. The method of rinsing the kettle is standard, however, if you are using a fresh plant, you need to wait longer due to the reduced acid concentration.

How to descale an electric kettle with household chemicals

Naturally, you can use not only folk remedies, but also special household chemicals. Manufacturers of various compositions for use in everyday life could not ignore such a problem as the formation of scale in an electric kettle, therefore, on the market for chemical products, you can always find several means suitable for this purpose. They can be in liquid, powder, and tablet form.

The manufacturer, of course, can supplement them with his own instructions, but on average, the way of using chemicals comes down to boiling water for 40 minutes, in which a given dose of the agent is dissolved.

Compositions can contain different types of acids (sulfamic, adipic), including those that can be found in your own kitchen.

As a rule, after the first use of special means, the sediment will begin to exfoliate and fall off in pieces from the inner surface. However, it is important to wash the inner container as thoroughly as possible, and the more active the substance, the more times you need to repeat the washing.

This should not be neglected, if citric and acetic acids are used in the food industry, then other acids can harm the body.

The use of strong chemicals is used only if the contamination in the kettle is too great, and the scale layer is so thick that it does not lend itself to standard methods.

Sometimes the owner of the device makes a choice in their favor, because he wants to achieve the fastest possible effect, however, if the scale layer has increased over the years, and the kettle is still functioning and there is no desire to throw it away, even "Anti-scale" and other similar means will not cope with it with the first same attempts.

In addition, cleaning agents are unnecessary harm to your health. It is much better to remember this problem in time, and use "light" types of acids that can be found in the kitchen, than then poison the air in the room with chemicals.

You can prevent limescale build-up even if you just regularly wash the inside of the kettle with a relatively soft washcloth and ordinary dishwashing detergent.

But if the kettle is nevertheless contaminated, chemistry will be the most effective solution, only powerful active substances can quickly cope with an old and thick layer of plaque.

The modern variety of teapots is amazing. You can't keep up with innovations: manufacturers experiment with materials, technologies, shapes and colors. To make the kettle last a long time, it is advised to use spring, filtered or bottled water. And if this is not possible, settle the tap water throughout the day.

Why does plaque appear

Over time, scale will appear in any kettle. But the increased hardness of the water will greatly reduce these periods and will cause many problems. Firstly, scale is dangerous for the heating element. A spiral or a metal disc coated with a deposit quickly overheats, loses heat transfer and, as a result, burns out. Secondly, additional electricity costs will be required for boiling. Well, it is clear that water only from clean dishes will give coffee or tea a good taste.

Hard water contains excess amounts of calcium and magnesium salts. A hardness of 3 to 6 mEq / L is considered normal. White and dark spots on faucets, sink or toilet, clogged holes in the shower pipe, whitish spots on washed dishes, persistent lime deposits in the kettle are sure signs of high water hardness (from 6 to 9 meq / l).

Many people believe that installing a filter (jug, flow or reverse osmosis) will completely eliminate the problem of scale. In fact, it will reduce plaque build-up, but only slightly. The action of most filters is not aimed at softening water, but at its mechanical cleaning from heavy metals and bleach.

How to descale a kettle: special chemicals

How to wash an aluminum kettle and remove rust? Before you remove the scale in the teapot, you need to remember: it is impossible to mechanically remove the plaque that has already formed. If you start scrubbing or scrubbing it with your own hands, you will ruin the device. Therefore, in our time, many chemical agents have been created to combat scale. Basically, these are liquid or powder preparations based on soda ash.

They all have an identical principle of operation: according to the indicated dosage, we put it into a kettle, fill the device with water up to the maximum mark and boil it. After that, rinse thoroughly, boil fresh water again and drain.

Do not use cleaning gels or powders with coarse abrasive granules. They will scratch the surface, and the scale will adhere even more firmly to the bottom and sides of the kettle.

The main disadvantage of industrial products is that chemicals can enter the stomach. So it is not harmless. Yes, and not all formulations give the desired effect.

Old-fashioned methods

You can rest assured: time-tested folk recipes guarantee a 100% positive result. Ordinary soda, vinegar and "lemon" are recognized leaders among the remedies for descaling in a teapot. To successfully get rid of solid deposits, you will need knowledge of dosages, cleaning steps and rules for use in different types of devices. You can also boil it off to eliminate pollution.

For a regular enamel teapot

Such specimens are less and less common in modern kitchen interiors. But, of course, they continue to buy, because they are much cheaper than their electric counterpart. It is quite easy to care for an enamel teapot. The main thing is to do everything in a timely manner.

Vinegar

1. Fill the kettle with a solution of two parts water and one part vinegar. Bring to a boil and cool naturally.
2. Then drain the water, rinse the dishes abundantly.
3. If the sediment has not completely disappeared, repeat the procedure.

In order to boil the kettle from limescale with vinegar and not get poisoned by caustic steam, you need to open the windows during operation and put on a protective gauze mask. And before using the kettle, you should once again boil clean water "empty" to eliminate the specific vinegar aroma.

Lemon acid

1. Fill the kettle with lemon water at the rate of 10 g of "lemon" per liter of water.
2. Boil.
3. Leave the hot solution for several hours.
4. Pour, thoroughly rinse off the lime grains.

A store-bought product can be replaced with lemon: cut into pieces and boil for ten minutes.

Soda

1. Boil a soda solution diluted in the following proportion in a kettle: two tablespoons of baking soda to one liter of water.
2. Wait until it has cooled down and remove soft deposits with a sponge.
3. If the descaling quality is not satisfactory, repeat twice.
4. This procedure can also precede the vinegar cleaning.

For electrical appliance

The electric kettle is very easy to use. Heats water quickly and almost silently, looks very aesthetically pleasing and modern. The impeccable appearance of such a kettle also requires internal cleanliness. Heating elements are especially important for regular maintenance. It is more convenient to clean a kettle with a disc heater than with a spiral one, reminiscent of a Soviet-era boiler. In addition, the first is more durable and heats the water faster. How to effectively descale an electric kettle? What methods are suitable for devices made of different materials?

From glass

1. Boil water with a couple of tablespoons of citric acid and the same amount of soda powder.
2. Let it stand for up to 20 minutes.
3. Wash off the natural acid-base composition.

Vinegar will help you to successfully remove scale in an electric kettle made of glass. Everything is extremely simple: open the window, boil the water and only after turning off the electrical appliance, pour two or three tablespoons of food vinegar into boiling water, cover with a kitchen towel until it cools completely. Make sure that the shiny metal surface of the heater does not darken. Rinse with plenty of running water.

Stainless steel

1. Pour a full kettle of water (standard capacity 1.7 liters).
2. Add a couple tablespoons of baking soda and bring to a boil.
3. After cooling, remove the white flakes with a soft washcloth.
4. Rinse thoroughly.

A stainless steel kettle is less prone to lime build-up. Nevertheless, a few more tips will be useful on how to quickly get rid of scale in a kettle made of such material. So, in a container, you can boil a pickle from pickled cucumbers or tomatoes. Cleaning with apple or grape vinegar is also recommended - a glass of the product is poured into a boiled liter of water and left for half an hour.

Ceramic

Beautiful painted ceramic teapots, although very durable, require careful and careful handling. There are no specific recommendations for cleaning plaque, so choose one of the recipes above.

Remember the safety measures while working with boiling water and folk remedies. This is important, because, according to reviews, ceramic teapots are quite weighty, keep warm for a very long time and have rather uncomfortable, very hot handles.

Made of plastic

Such an electrical appliance is the cheapest, lightest and most unpretentious. It will be as good as new if you clean it with any product you have on hand. You can also try and evaluate a peculiar way: boil water with apple peelings in a saucepan, let it brew a little and pour into an electric kettle. After a couple of hours, pour the "compote" into the sink and rinse the cleaned dishes with water.

Neglected cases, if the plaque does not go away

Don't know how to remove heavy limescale deposits in your kettle? Running cases will be "cured" by the following method, which consists of six simple steps.

1. Add three tablespoons of baking soda to a kettle with boiling water.
2. After half an hour, boil again and pour out immediately.
3. Collect fresh water and now add a couple of tablespoons of vinegar.
4. Boil the solution again and pour out half an hour later.
5. Remove the resulting loose mass with a soft sponge.
6. Rinse well so that no vinegar smell remains.

Does the Coca-Cola method work?

Salt deposits of calcium and magnesium dissolve under the influence of citric, acetic, orthophosphoric acids. The latter, H3PO4, is part of the popular Coca-Cola drink. To descale the kettle with Coca-Cola, you just need to pour 0.5 liters of the drink into the appliance (this is enough to completely cover the heater). In 15 minutes, soda will remove light deposits without boiling. You can consolidate the effect by boiling this sweet flavored liquid in a kettle and simply rinsing well with water at the end.

This unusual method is suitable for a glass teapot. And for plastic, stainless steel and ceramics, exclude drinks with dyes, they can pigment the walls of the electrical appliance. Try boiling plain sparkling water.

Practice shows that the best way to remove lime deposits is to descale the kettle with citric acid by boiling water with a couple of tablespoons of "lemon". It turns out cleaner and cheaper than using Coca-Cola, and also without the pungent smell, as in the case of using vinegar.

"Options" for descaling

Interestingly, there are ways to not only descale your kettle, but also how to prevent it from forming. To do this, you just need to select a device with additional "options". Inside some models (although they are more expensive), cleaning cartridges are installed that filter and heat the water at the same time. There are also teapots with gilding on a spiral, the function of which is to protect the part from hard deposits and corrosion. But the most "advanced" users recommend installing an electromagnetic water converter at home. So in one fell swoop you can solve all the problems with increased water hardness and protect not only the kettle from scale, but also the washing machine along with the water heating tank.