How to make a corner computer desk. How to design and assemble a computer desk with your own hands. Steampunk furniture

It is difficult to imagine the life of a modern person without a computer, which requires a specially designated place in one of the rooms. A laptop or monoblock can be placed on any convenient plane, while stationary “smart” devices require computer tables. Due to the high cost in the retail network and structural simplicity, many are wondering - how to assemble a computer desk? And there is nothing complicated in this, if you build intelligently and in stages.

Types of computer tables

A computer desk is a multifunctional kind of cabinet furniture. People who constantly work at a computer at home cannot do without it. Without a convenient table, there is nowhere to place in one place:

system unit and monitor;
mouse and keyboard;
speakers and router;
folders and documents;
printer and copier paper;
stationery and discs for the accumulation of information.

All this is important to consider when thinking about how to assemble a computer desk with your own hands. An approximate diagram of a classic computer desk:

Designers and technologists have developed many types of cabinet furniture, including multi-seat computer tables. Even if the PC is used occasionally, you need a simple table where everything is at hand - with a place for a "system unit" and a sliding shelf for the keyboard. Or you will have to allocate a niche in the rack with shelves, providing a folding working plane. The choice of the shape of the tabletop depends on how you work for the PC:

"riveted" look to the monitor;
a lot of typing or playing games;
often print documents;
refer to a laptop or tablet standing on the side.

Look at examples and drawings of computer tables, the shape of the tabletop varies:

simple rectangular;
with a rounded cutout centered above the keyboard;
with an arbitrarily curved line;
L-shaped;
U-shaped;
U-shaped.
curly.

It is not necessary to use wood, plywood or chipboard. Sometimes it’s enough to limit yourself to a high-tech frame structure - this is a tube frame plus a fixed table top made of any suitable material:

plastic;
thick plywood;
laminated chipboard;
thick display glass;
veneered chipboard or thick plywood;
finished worktop made of solid wood (natural wood).

You can also use parts of old furniture, designed as a table top on a computer desk with your own hands. But these are not all varieties of a table for a PC, since they are conditionally classified into subgroups according to their configuration:

1. A rectangular computer desk with a cabinet for a system unit is a classic version that came in the form of a desk transformation. But an ordinary desk is not very convenient for working at the keyboard, so the roll-out shelf turns it into a convenient functional place for working with a PC. When there is no need to use powerful speakers and various office equipment, this option is enough without an additional cabinet.

2. Corner computer desk, small, compact, takes up minimal space, very functional and ergonomic. One free corner in the room is enough to install a small product with great benefits of a work surface. It’s even convenient to have lunch here if you can’t leave your computer. It can be equipped in height with various hanging shelves along the entire height of the corner. The corner design makes it possible to use both planes of the wall and the corner to accommodate:

auxiliary devices and office equipment;
paper and stationery;
collectible items;
indoor plants.

For example, computer tables - photo:

3. Modular computer desk is a great invention for those who like to re-arrange the workspace. The set should have a basic set of modular elements:

tabletop and sliding keyboard;
pedestal under the "system unit";
additional blocks;
hanging shelves;
corner sectors.

4. If it is not possible to allocate a permanent place for a stationary PC or laptop, it makes sense to opt for a compact mobile version. This is a folding table-transformer, where there is no table in the traditional sense, but there is a portable table top. This option has minimal dimensions and weight, but all planes are easily laid out. This workstation is easy to carry and transport so you can keep working:

in the country;
on a picnic;
on the beach in the shade, etc.

5. Table-rack in the form of a rack with a folding top and multi-tiered shelves. Very handy when the room is very small but there is plenty of vertical space along the wall. In this design, it is recommended to fold everything after work, completing it with a folding chair. At the bottom, it is convenient to install a turntable under the system unit in order to deploy it after work to the place where the feet are usually. A monitor is placed on the main stationary shelf of the rack, and a keyboard and mouse are placed on a folding table top. Shelves up to the ceiling - for the rest of the equipment.

6. A multi-seat computer desk is convenient in a family where there are several PC users and office equipment. Behind a common tabletop, 2-4 people can sit behind 1-2 monitors. If there is no suitable table for sale, it is difficult to find, ask how to make a computer table for several people. To do this, it is important to consider where the main units and PC users will be located.

Selecting the color of the table surfaces

The advantage of self-assembly of a computer table is the absence of restrictions when choosing:

model and countertop configurations;
dimensions (the dimensions of the computer desk are limited by the space of the room);
complete with additional shelves and cabinets;
countertop material and color.

Ideally, a computer desk should be in harmony with other furniture in the interior and match the style. The classic table has a natural wood veneer, regardless of the base, but can be plain, matching one of the leading shades of the room.

1. If the room is decorated in a modern style, there is a lot of equipment around, then a black lacquered computer desk is suitable, in harmony with a large plasma monitor.

2. A small table should match in color with other cabinet furniture.

3. for a dark room on the northern stolon, it is better to choose light surfaces of MDF, laminated chipboard or other wood-like finishes.

4. White or other plain type of surface should be in harmony with other items in the interior.

5. It will also be original if you choose any unusual color of the tabletop, cover the base with fabric, make an original print and varnish the image.

Computer desk made of prefabricated parts

Due to the fact that prices for computer tables are increasing all the time, it is advisable to make them yourself. A table that is bought in a store without assembly and delivery will be much cheaper than a finished one. It is sold in the form of separate packages for each block, but there is an instruction on any computer table that shows the assembly steps. It is not difficult to assemble it, but it is tedious to be careful not to confuse the structural and fasteners. For assembly you will need:

trays for sorting accessories and small parts;
a set of screwdrivers (flat, Phillips) or a screwdriver with different nozzles;
assembly diagram (instruction) and a drawing of the finished table.

Self-assembly according to the scheme is a simple matter, but unhurried and painstaking, and requires attention and perseverance. When buying a table, it is worth clarifying who you can call back if clarification is needed.

Attention: Large furniture companies engaged in wholesale and retail trade have specialized consulting centers that work with consumers. It is beneficial for them to deal with buyers who decide to self-assemble. When buying from the manufacturer, you can also ask the managers whose phone numbers are listed on the official website - how to assemble a computer desk? Help and advice can be obtained at any stage.

Stages of assembling a computer desk for individual modules

Stage number 1. Lay out in a conspicuous place:

tool;
assembly details and accessories;
scheme (instruction);
the main structural details according to the marking packages.

Stage number 2. Wooden parts (or chipboard) are laid out with the inside towards themselves so that there are visible holes for assembly. Next to each block lay out the corresponding parts for fastening. Check the completeness - if there are enough parts, you can assemble each block separately. The tabletop is fixed last, if there are no reservations in the instructions, diagram or drawing. After the general assembly, all the screws are firmly tightened or the fasteners are screwed deeper and closed with plugs.

Stage number 3. The greatest care is shown when assembling the rotary modules and the sliding shelf for the keyboard. The guides must be strictly parallel and horizontal to the floor, the shelf movement limiters are placed behind. The assembly sequence is carried out strictly according to the instructions so that there are no defects. When the pull-out unit is ready, the side racks are assembled to prepare the base for the countertop.

Stage number 4. Connect all the blocks according to the scheme with a working surface (table top), put a sliding shelf with rollers on the guides. Install decorative caps. Fasten the back plywood on the back wall. Check again if the table is wobbly. If everything is fine - reinstall and arrange all the parts of the desktop computer in their places, connect and work.

Worth considering:

1. Most models of computer desks are shipped unassembled from the warehouse, and you should ask about this when buying. It is important to immediately check the complete set, fittings and assembly scheme.

2. Materials that may delaminate during assembly are assembled carefully, especially when using a multi-purpose power tool, since it is difficult to adjust the pressing force or drilling speed. Be especially careful that the nozzle does not make a through hole if there should not be one.

3. The easiest way is to assemble a cabinet, so it’s worth starting with it in order to master the process. It is more difficult to mount moving parts and guides for their movement.

4. It is obligatory to fix the rear wall of the cabinet - it serves as an additional component of reliable fastening. Handles and other fittings are fixed last, as they can interfere with assembly.

5. Table supports - cabinet, sidewall or metal pipe. The stability of the computer desk depends on the reliability of their fastening to the table top.

6. Some parts of modular structures can be stacked on top of each other or hung on the wall. However, modules cannot be stacked on top of each other without securing with pins - one awkward movement, and parts of the case will fall along with office equipment.

Features of making a table for a computer with your own hands

If there is no desire to buy a ready-made computer desk, but you want to make it yourself, according to some special needs, then you will have to do all the details yourself. If we return to the beginning of the description, drawings of computer tables were outlined there, which are recommended to be used as an example. As a rule, in such drawings you have to make your own adjustments. With a creative approach, it is possible to borrow ideas and the best design details from each variety. For example, combine the advantages of a rack, a transformer and a corner computer desk.

After the final version is selected, sketches and drawings are made, it's time to move on to translating the meta into reality. In a building supermarket, we select material for the manufacture of our table and specify whether they provide services for cutting materials. Please note that you cannot do without precise cutting by a machine, especially when it is not an array, but pressed materials:

finished worktop with trimming;
MDF board;
veneered plywood;
laminated chipboard, etc.

When the store does not provide such services, cutting can be entrusted to any carpentry shop where there are special machines. Without drawings, no one will undertake to do according to a photo or drawing. Sometimes experienced craftsmen can take over the development of a drawing, but for a fee. But a good sketch with detailed dimensions can also serve as a basis for them to realize your desires. Don't forget to remind them to prepare the holes for mounting, and at the same time check what kind of fasteners to buy in the store. It remains to assemble your universal computer desk at home with your own hands. The quality of the assembly directly depends on a good tool and accuracy, especially when trimming.

Our life is no longer easy to imagine without a computer. Although some prefer laptops and all-in-ones for their compactness and mobility, a familiar desktop computer is by far the most convenient solution. But equipment of this kind should be placed in a place specially equipped for this, but often buyers do not quite understand how to assemble a computer desk, and whether it is worth doing it yourself.

Before Assembly

Before directly placing home-made or purchased furniture, you need to decide exactly where it will be located. This is an extremely important step, because the location of the equipment must comply with all safety rules and proper operation.

The basic rules are:

The presence of outlets nearby and the ability to easily connect devices.
It is better to arrange the structure so that it does not take up much space in the room.
To avoid vision problems, the computer room should be well lit with natural light.
The wall to which the computer table will be attached should be flat, and pictures and other decorations should not hang on it.
Do not place the equipment near heaters or radiators, otherwise the devices may overheat.

By following these rules, you can eliminate most of the problems that may arise when working on a personal computer in the future.

Assembling a computer table according to the instructions

Ordering a finished table without assembly and delivery will save a significant amount, and the process itself, although it requires accuracy and painstaking work, is quite simple. Even if there are difficulties with the table assembly scheme or in the process, there is always the opportunity to contact the support center of the store that sold this product.

Before assembly, check the presence of each necessary part and the circuit itself. The cabinet is the fastest and easiest to assemble, and the most difficult stage is the installation of moving parts, so it is recommended to start with the cabinet.

Carefully fasten the supporting components to the countertop so that the finished structure does not stagger.

Sequencing

Unpack each package and distribute the parts. Put the small ones in some tray or box, arrange individual modules: legs, table top, etc. The countertop, as a rule, will be assembled at the very end according to the instructions.

Prepare a screwdriver, 2 screwdrivers (flat and Phillips). According to the diagram, lay the parts you need according to the instructions on the floor with the inside up, put the metal fasteners so that the holes match, and connect them with mounting screws and plugs. Each part is connected exactly according to the assembly instructions for this table.

Under the work surface, mount the guides for the keyboard drawer, horizontally and parallel to the floor in the places indicated for this purpose. Make sure the shelf slides in smoothly and without interference, and secure the rails with a screwdriver. Install the end caps and insert the caster shelf.

Check all connected parts according to the instructions, the structure itself must be tightly fixed and not wobble. You can install and connect a computer.

This algorithm is applicable to almost any type of furniture. Even such a difficult process as assembling a transformer table will not be unnecessarily complicated if you arrange the parts in the order of the diagram and carefully read the instructions.

Making your own computer desk

Design

Sometimes assembling a computer table with your own hands can be a cheaper way than buying or assembling costs. But in this case, you yourself will have to think over the design, material, color, make instructions, drawings, diagrams and details.

The first step in manufacturing is to design and plan your structure. As a rule, this is done using chipboard. It should be remembered that this approach will require much more attention and care than the connection of ready-made parts according to pre-written instructions.

The main parameters by which you can design a computer table:

Type: corner or straight, rectangular, modular, multi-seat, stand table or transforming table;
Length: for the extension and countertop (space for the user) they recommend 60-70 cm, for corner options this parameter will be no more than 60 cm, since the turning space, space for the system unit, for the cabinet (30-40 cm) are taken into account
Depth: 60-70 cm (including the extension) or 45 cm (without it), for the corner model 85 cm;
Height: depends on the height of the user, the average value is 75 cm. There is a formula for calculating the optimal height: height * 75: 175. For a child, it is recommended to plan a seat height regulation system.
Cabinet planning

It is also possible to find ready-made options, diagrams, drawings, instructions and photos of assembling any table on the network. This can slightly simplify the design and speed up its manufacture.

Part preparation and assembly

When the final version has already been selected, all the parameters suit the user and are well thought out, it is time to turn the idea into reality. In order to assemble a computer table according to the scheme, you will need:

Material: furniture sheet of the desired size, it is allowed to use MDF boards, plywood or chipboard;
Machine tool, hacksaw, chisel;
Sandpaper;
Any lacquer to cover;
Self-tapping screws, fixing screws, drawer handles, pull-out shelf rollers and other parts provided in advance.
Pencil, tape measure, square;
Screwdriver and drill with drills.

Once all the tools are ready to work, you can start cutting:

First of all, you need to cut out the countertop, sides, top and bottom of the cabinet. Take the dimensions exactly as shown on the drawing.

Cut the corners of the vertical panels, the back corners can be left as they are, as they will be directed towards the wall. Using sandpaper, round off any cut irregularities, sand sharp corners.

Cut out a shelf for the keyboard and a stand on which the system unit will be located. If the drawing includes additional shelves, cut them out as well. Round the front corners, near the back bottom corner, cut a small area for the baseboard so that the shelves and stands are flush with the wall.

Using a drill, make holes in the places marked in advance (with a pencil). Check if the holes will match perfectly.

If a cabinet is provided, then cut out all the remaining walls and drawers, mark with a pencil where the drawer guides should be located, and attach them with mounting screws. Connect the bezel to the lower part, and then to the body walls themselves. Assemble the box, not forgetting the back wall, drawers, and check the movement of the drawers along the guides.

Similarly, an extension is made, if it is provided according to the plan. To do this, use a drill to cut holes in the tabletop and on the vertical walls of the structure, where they will be attached to the tabletop to be attached to it. Take a square and set the sides so that they are perpendicular to the plane of the table, and secure them.

Screw the screws into the underside of the countertop, you may need to find someone to help hold the panels. All other walls parallel to the plane of the floor are attached in the same way as the side strips. The main thing is to check with the help of the level their location relative to the floor.

The assembled table must be completely disassembled. Mark the details in advance so that you can immediately understand what is attached to what. Sand every detail of the structure and varnish to ensure the smoothness and long life of your structure.

Connect the modules to each other according to the diagram and check the design for looseness.

If the table stands firmly and does not tilt from side to side during operation, then it is ready for use. You can safely put it in a pre-designated place and connect equipment.

The quality and durability of the structure depend on the accuracy of the installation and cutting of parts, as well as on the quality of the fasteners themselves. By choosing each component of your table model yourself, you can prevent breakage and other inconveniences that may arise in the future.

Thus, in addition to buying a ready-made table, you can save quite a tidy sum by assembling a computer table with your own hands. But such a method will require extreme accuracy, painstaking work and more time than assembling ready-made parts.

A homemade table can look exactly the way the user personally wants it, the main thing is to handle the tools correctly and pay more attention to assembling and polishing the wood panels.

Photo of the table assembly process

Almost every home today has a personal computer. And a special table for him, comfortable, equipped with the necessary shelves for each device, is also not uncommon for a long time. It would seem that the easiest way is to buy such a table in a store, since the choice is wide and allows you to find a suitable option.

But in the store, such a table can cost a lot of money. In addition, the dimensions of the finished product that you like may not match the area and layout of the room. Yes, and sometimes you want to choose a color scheme to your liking, and not from the catalog.

There is a good opportunity to make a computer desk with your own hands. In this article, we will walk you through this process in detail.

How to make drawings of computer tables

Of course, as a computer desk, you can use a student desk or a standard office desk, one of those that were in the classrooms 15-20 years ago. But given the many additional devices, such as a printer, MFP, and many gadgets that connect to the system unit or laptop, you will quickly realize that it is very difficult to sit in such a space for full-fledged work. In addition, the child will need to do homework at the same table, that is, draw, read, write.

It is necessary to make such a table that it has as much useful surface as possible, not occupied by appliances. And all devices - a monitor, a system unit, etc. - will be in their places, and at the same time they will not interfere at all.

We will consider the option of a fully functional computer desk that you can make yourself at no extra cost.

First of all, you need to create a drawing, which will take into account the dimensions of the entire structure. You can see a detailed drawing of a computer desk in the picture:

As you can see, this is the simplest, classic form of the table. Straight lines, conciseness, and at the same time full functionality. Such a table consists of a tabletop, a stand for the system unit, a sliding keyboard, cabinets and shelves.

Please note: the dimensions of the table indicated in the drawing will help you orient the product in the space of the room. If you need a larger or smaller table, just keep the proportions in a suitable scale.

After you have decided on the required dimensions of your computer desk, using the drawing, make a list of everything you need and start shopping.

Materials and tools that you will need in your work

Having studied the scheme of the computer desk that we offer you, you probably noticed that for the manufacture of such a piece of furniture you will need many components. The materials that will be required are indicated specifically for the dimensions in the drawing:

Board size 12 X 120 mm - 6.2 m;
Sandpaper of various grain sizes;
½ sheet of plywood measuring 6 X 1525 X 1525 mm;
Furniture board 18 X 600 X 2000 mm, pine - 2.5 pcs;
Furniture shield 18 X 400 X 2000 mm - 3 pcs;
Furniture shield 18 X 200 X 2000 mm - 2 pcs;
Lacquer matte or glossy.
1 set of rails for drawers, 400 mm long;
50 self-tapping screws 5 X 60 mm;
dowels;
Drawer handles.

You will also need 3 sets of ball or roller guides for drawers, 500 mm long. It is these details that determine the quality, durability and strength of the original, so their choice should be taken responsibly.

For your information: the main advantage of roller guides over ball guides is their low cost. But the rest of the parameters are much lower: the roller guides do not extend completely, they are fragile and they do not have a reliable limiter. In ball telescopic guides, these shortcomings are absent.

In addition to materials, immediately stock up on all the necessary tools:

Meter ruler or tape measure;
Square;
Pencil;
Chisel;
Hacksaw;
Screwdriver;
Drill and drill to it;
Sander;
You may need a dust collector if you are going to work indoors.

After you have stocked up with everything you need to make a computer desk with your own hands, it's time to get to work.

We make blanks for a computer table and assemble the lower frame

At this stage, you need to pay special attention to which you make this piece of furniture.

First of all, mark the details of the computer desk on the surface: vertical walls in the amount of 3 pieces, the bottom of the table, the table top, the cover for the bedside table. Cut them according to the diagram, observing the dimensions.
On the vertical walls, you will need to make cuts of the front upper corners, about 2 X 2 cm in size. Clean the saw cuts with an emery cloth.
It is desirable that the table can be moved close to the wall. To do this, cut off the lower rear corners of the walls so that the resulting slot corresponds to the size of the plinth. According to our scheme, the distance will be 4.5 X 5.5 mm.
On the back side of the vertical wall, located in the center, make a selection at a height of 265 mm above the floor. Its width will be 200 mm, and the depth - 18 mm. At this point you will attach a transverse panel, cut from a 18 x 200 mm board, connecting the vertical sides. Screw it with self-tapping screws to the side walls back to back.
The rear wall of the table will be replaced by a transverse panel, which will provide the structure with the necessary stability and rigidity.
After all the parts are prepared, drill holes in the right places. This must be done in advance, otherwise the workpieces may crack during screwing. Assemble the frame and secure with screws.

Now you need to make a niche in which the system unit will be placed. If you are not an enthusiastic gamer, programmer or system administrator, and you do not need constant access to the components of the system unit, then the best option would be a standard stable niche with self-tapping screws.

Saw out a small side wall and a horizontal shelf. Cut off the front upper corner of the sidewall and clean it with sandpaper. Process the bottom rear corner to fit the plinth. Screw the small sidewall to the shelf and back panel, attach to the large side wall. Close the openings under the bedside table and shelf with plinth panels. Use dowels without as fasteners.

We make a superstructure of a computer table

In order to make a full-fledged multifunctional computer desk, the instruction provides for the presence of not only a tabletop and shelves for additional devices, but also an add-on that will also perform a function.

Mark and saw out the side elements of the structure, round off the front upper sections with sandpaper. To ensure that the sidewalls are evenly fixed on the countertop, first make a template, the thickness of which will be 18 mm. Drill holes in its ends. Attach the finished ends to the countertop and make markings for fasteners.
The marked holes should be drilled according to the following scheme: through - in the countertop, deaf - in the lower ends of the side walls. At this stage, you will need a square, it will help you keep the angles correct. Install the side pieces on the countertop using a leveling square.
Screw the screws under the tabletop, aligning the holes in the lid with the slots in the ends of the sidewalls. After that, take a shield 400 X 2000 mm, and cut it in width along. Thus, you will get a top shelf 315 mm wide and a fixing transverse ledge.
The average vertical wall must be cut out of a shield measuring 200 X 2000 mm. Attach it to the countertop in the same way as the large side walls, controlling the joints with a square. Screw the back side to the sides and lay the top shelf on the end of the central wall. Align and fasten with self-tapping screws.
Now you need to make the left shelf. She needs a shield 200 mm wide. This shelf is designed for a printer or MFP, which means that it must be strong enough and voluminous.

Computer Desk Drawers and Keyboard Drawer

A computer desk with drawers is a very comfortable piece of furniture and a functional element of the interior. This is the table we are currently making. Consider how to make it right.

Saw out the bottoms for the drawers from the plywood, and the side walls from the 12 X 120 mm board. Twist the blanks by 4 pieces with self-tapping screws and sew the bottom. Adjust the width and depth of the drawer relative to the thickness of the rails and the internal dimensions of the nightstand.
The guides must be fixed from below. Step back from the front edge of the side elements by 18 mm and screw the guides onto the walls. At the same time, observe symmetry and the desired distance. An indent will be needed in order to attach the front panels to the front walls of the drawers.
The keyboard shelf must be cut out taking into account the thickness of the guides of the sliding mechanism.
Now disassemble the design of the table into its constituent elements, sand them and varnish them. After the coating is completely dry, assemble the table again.

Tip: do not tighten the screws several times. This will greatly weaken the nests. If you feel that the fasteners are not strong enough, use wood glue to strengthen the connection.

The drawers and drawer for the keyboard are ready, the design of the computer desk is assembled. The finishing touch remains: install facade panels on the boxes.

Saw out the front parts in the amount of three pieces, mark and drill holes for the handles. The screws fixing the handles will secure the sides of the drawers and the cladding.
Place the cladding panels in the opening of the front side of the pedestal. Use wedges to fix gaps between drawers. Drill holes for handles.
Install the handles and secure them with self-tapping screws, tightening the lining and front walls. On the inside of the drawers, screw in a few more screws to provide additional security.

Your computer desk is completely ready.

Video about making a computer desk with your own hands

As you can see, making a computer desk on your own is not at all difficult. You will not only get a comfortable place to work and relax, which will look good in the room, but also gain experience in carpentry for the manufacture of furniture. Perhaps some of our readers have already dealt with the design and creation of computer tables. Please share your experience in the comments, ask questions that you have while reading this article. We will be happy to discuss the workflow with you and learn something new.

We wish you easy work and comfort in your home!

The computer has become a part of modern life. Portable devices with small dimensions do not require separate space for use and storage. But the owners of stationary models have to face the question of where and how to make a computer desk in order to conveniently organize a special place in the house. Sometimes it is difficult to find such a table with a convenient add-on that would ideally satisfy all requirements (design, functionality), and be affordable. Therefore, another formulation of the problem becomes more rational - how to make a computer desk with your own hands, using drawings and master classes.

The structure and size of the computer table

Plan a homemade desk for your computer, taking into account all the elements of the system that you use. The standard package includes: system unit, monitor, keyboard, mouse. Complete the list, if necessary, with a printer, scanner, sound system, etc. Consider the ready-made drawings and table diagrams, they will tell you where this or that object can be placed. Be sure to provide additional places with lockers, drawers, shelves for papers, textbooks, notes, so that everything is at hand.

A table with a superstructure should be compact, but at the same time comfortable and not too small. When determining the location of the structure at home, be sure to consider the possibility of access to the mains, natural light, sufficient distance from parts of the heating system.

A computer desk can be: straight, angular, combined, transformer. Direct designs are the most common. They can be installed in almost any room. Making a corner computer desk with your own hands means making the most of the corner of the room, while creating a convenient place for using office equipment. The transforming table occupies a special place. It can fit perfectly into any interior. The product can be a cabinet, a chest of drawers, a pencil case in which a computer is hidden. There is even a transforming table with small cabinets, which, if necessary, turns into a bed.

Universal desk for computer

If you do not have experience in furniture production, choose not a transformer, but a simple but comfortable classic design of a computer desk with an add-on. It will provide enough space for equipment and the necessary materials. And in order for the new furniture to become organic in the finished interior, use a furniture board or chipboard that matches in color with other furnishings.

Materials and tools

For a computer desk with an add-on you will need:

2.5 pine furniture panels 2000x600x18 mm.

3 furniture panels 2000x400x18 mm.
2 furniture panels 2000x200x18 mm.
6.2 m boards 120x12 mm.
Half a sheet of plywood 1525x1525x6 mm.
3 sets of ball (or roller) guides for drawers - 500 mm.
A set of guides for a sliding shelf - 400 mm.
Dowels.
3 drawer handles.

At work you will use:

Electric hacksaw.
Drill with drills.
50 self-tapping screws 5x60 mm.
Screwdriver.
Sander or sandpaper (different grits).
Square, tape measure, ruler, pencil.

Operating procedure

Making the base:

Carefully study the drawing of the table with the superstructure. According to the indicated dimensions, it is necessary to prepare structural parts: a tabletop, 3 racks that will be placed vertically, a bottom, a bedside table cover.
Select parts to be placed vertically. Cut off the front top corners 20x20mm. Also remove the lower rear corners of the walls (4.5x5.5 mm) so that the table can be installed close to the wall, despite the existing plinth. Carefully sand the cut points, and make the front corners rounded.
To install a 200x18 mm transverse panel, on the rear end of the vertical central panel at a distance of 265 mm from the floor surface, make a recess 18 deep, 200 mm wide. This panel is needed to connect 3 vertical racks, it will be attached to them with self-tapping screws. In addition, the transverse part will serve as a stiffening rib for the base of the entire design of the computer desk, since the back wall of this product is not provided.
After preparing the parts with a drill, pre-drill holes so that the structure of the workpieces is not damaged during bonding. Assemble the frame with self-tapping screws.
Let's start creating a stationary niche for the system unit. Cut out the parts (small side wall and horizontal shelf) according to the indicated dimensions. Cut off the front upper corner of the side part (20x20), round the cut, grind all the ends of the parts. Connect the sidewall and shelf, then - the entire structure with the side wall of the table with self-tapping screws. Gamers and advanced computer scientists, who often update the package of the system unit, prefer to place it on a separate stand with wheels. In this case, use drawings and diagrams from the Internet.
In the openings under the shelf and bedside tables, drill holes for dowels. Attach the plinth panels to them.

Let's get started with the table add-on:

Cut out the side parts of the superstructure, immediately round off their front upper corners. Prepare an 18 mm thick template so that the sides on the tabletop are fixed evenly. Drill holes in the ends of the template with a drill. Then attach the ends to the countertop, make precise markings for fastening.
Prepare through holes in the countertop, and blind holes in the lower ends of the sidewalls. Using a square, control the correct connection. From under the table, screw the self-tapping screws through the countertop into the sidewalls.
Make a markup on the shield 2000x400 mm so that you get a shelf 2000x315 and a transverse side bar, which will be fixed at the top of the structure. In addition to the main function, these parts will increase the rigidity of the superstructure.
Cut out the middle wall from the 2000x200 shield, attach it to the tabletop in the same way as the large side pieces. Check with a square that the connection is correct.
We install a vertical central partition. Screw on the back bar that serves as a side. Align the position of the shelf on the square, fasten it with self-tapping screws.
We make a shelf with a jumper. Choose the dimensions of the shelf arbitrarily. Make details from a shield 2000x200x18. Fasten the parts with self-tapping screws. Computer desk with add-on - ready.

Additional details, finishing:

For the manufacture of boxes, take a board 120x12 mm. Adjust the drawer parameters to the dimensions of the side cabinet and pre-prepared guides. Connect 4 boards with self-tapping screws in the back and front. Use plywood for the bottom.
Fasten guides. It is better to start from the bottom, gradually making marks for the following, control the symmetry of the location of the paired rails. Please note: roller guides should not be installed flush with the edge of the cabinet, but a little deeper. Indent to the width of the front of the furniture board.
From the pieces of shields, cut out the front parts for the boxes. Install wood chips between drawers to determine the size of each panel.
From the furniture board 400x18 we cut out the tabletop, subtracting the width of 2 roller guides along which it will move.
Disassemble the table into components. Carefully grind the parts with a grinder. Cover them with 2 coats of varnish. Then reassemble the frame.
Attach a handle to the center of each drawer front.

Compact desk for computer

Our homemade transforming table will be hidden in the closet. Shelves in the upper part will serve as a convenient superstructure. A design feature will be a swivel table top, with its help it will be more convenient to use a transforming table.

To make your own transformer table for your computer, you will need:

Finished cabinet size 1100x640x2080 mm.
Furniture board or chipboard sheet.
Screwdriver.
Screws.
Electric jigsaw.
Bolts with nuts.
Furniture varnish.

Work description

Cut out the details for the table, carefully studying the drawings. Mark the connection points.
Make holes for connections.
Sand the edges, eliminate all irregularities, cut off the excess with a jigsaw.
In the part of the tabletop that will move, make a blind hole 35mm in diameter (pivot center).
Drill a through hole through both countertops.
Drive the fixing bolt into the pivot hole, secure from below with a nut. The transformer is ready.
We cut out the shelves and fasten them with shelf holders.