How to make a slime for the keyboard. How to make a "slime" for cleaning the keyboard and other hard-to-reach places. How to make a jelly rag

A slime for cleaning the keyboard is an indisputably useful thing, you can order it on Aliexpress and wait for the purchase for two weeks or make it yourself from scrap materials. For this you need: sodium tetraborate, PVA glue and any dye that you have.

Everyone knows how sometimes it is difficult to remove dust and crumbs accumulated between the keys, to clean the grilles of a hair dryer or radiator, and such complex surfaces can be cleaned with a slime in a few minutes. It turns out that making a sticky assistant at home is very easy!

There are several recipes, depending on the choice of ingredients, you can make the slime transparent or not, if you want to make a toy for a child, then give the substance any color using an available dye, it can be: watercolors, ink, gouache or food coloring. A transparent gel will turn out if you use silicate glue as a base, not transparent - when PVA is at hand.

We need:

Sodium tetraborate (sold at the pharmacy) - 1 bottle
Silicate glue or PVA - 250 ml.
Dye
Any container of a suitable size and spoon.

By the way! Sodium tetraborate (borax) in this case acts as a thickener, but in addition it has a number of useful properties. Borax is an antiseptic; it is used to remove unpleasant odors and wash bins. You can cook. In horticulture, sodium tetraborate is used to protect plants from fungal and bacterial infections. So that cockroaches and other insects are prepared with the addition of borax.

How to make keyboard cleaning gel at home:

Shake the glue well. Experiments have shown that not every PVA glue is good for making slimes; Luch brand glue showed itself best.
Pour glue into a container and add a dye, the intensity of the color depends on its amount, in addition to the dyes listed above, you can use greenery, ink from pens, etc. Stir thoroughly so that the glue is evenly colored.
Now add sodium tetraborate while continuing to stir, it is on this ingredient that the viscosity of the mass depends, adjust the consistency by mixing the borax gradually.
When the gel becomes so viscous that it sticks to the spoon, we take it out of the container and begin to knead it with our hands like plasticine.
The result should be an elastic mass that easily stretches and returns to its original shape. If you put a lump on the table, then it will gradually spread. Slime should not be too hard, if it behaves like a rubber ball - this means that you "overdone" with sodium tertaborate, just give it to the children.
Our slime is ready, use it to your health. The finished cleaner is good at picking up dust, dirt, cat hair and crumbs from all surfaces.

General cleaning is a process that we always prefer to leave "for dessert". Simply put, avoid at all costs. What can we say about cleaning things that are much less global. Admit it honestly: do you, too, never get to clean the keyboard? Then entrust this business to a funny sticky substance. It is done one-two-three, and cleans dirt even in the most inaccessible places. Almost without your participation.

The childhood of everyone who grew up in the 90s and early 00s was not without a toy "slime": a moderately nasty sticky substance that painfully resembled snot. Apparently, it was for this similarity and cool consistency that the toy was adored by all the children in the yards and schools. It turns out that the star of "slimes" has not sunk even today. They just matured too and got a job. And now they successfully clean the laptop keyboard, smartphone screen and any small hard-to-reach places from dust, debris and dirt. And, best of all, such an assistant in the household is very easy to make yourself. Or for a company with children.

To make a "slime" for cleaning the keyboard, you will need:

1. Half a glass of liquid starch;
2. Packing of PVA glue (on average, a tube of 120 ml);
3. Half a glass of water;
4. Food coloring or glitter for decorating (optional)

Step 1: prepare the liquid starch

Dissolve 1 cup cornstarch in a quarter cup cold water. Make sure to mix the mixture well, without lumps. After that, set the mixture aside and boil almost 4 more cups of water in a saucepan. When the water comes to a boil, add the cornstarch. Stir the contents. Continue stirring for about a minute before removing the pan from the stove. Cool it down.

Step 2: mix

Mix PVA glue, half a glass of water and 8 drops of food coloring (optional) in a separate container. Stir until completely homogeneous.

Step 3: add half a cup of liquid starch

Step 4: mix

Like dough with your hands. It is desirable to wear transparent gloves (the dye can "shed" from contact with the heat of the skin). When the mixture begins to resemble plasticine as much as possible and stops sticking too obtrusively to your hands, drain the small remainder of the liquid.

The AliExpress Keyboard Cleaning Slime removes all types of dirt from keyboard and other hard-to-reach areas.

Thanks to its helium structure and plasticity, it penetrates deeply between the keys.

Disinfects and adds shine.

During cleaning, we often encounter the fact that we cannot wash some places with a regular rag or we need to clean a surface that cannot be wetted with water. In such a situation, a Chinese keyboard slime comes in handy. This is a gel-like substance that easily penetrates into the smallest cracks, depressions, pores and, due to its stickiness, removes dirt particles from any nooks and crannies.

What is it.

Slime has a gel-like consistency, soft to the touch and easily smears on the surface of objects. After cleansing, it does not leave marks on things, and the slime should not stick to your hands. Slime will help get rid of dust, dirt, crumbs, and also remove pet hair from hard-to-reach places

What can be cleaned.

Due to its helium consistency and the absence of abrasive particles, slime allows you to gently clean even the most fragile surfaces, such as the leaves of indoor plants. Slime is used to care for the keyboards of laptops, mobile phones, they are used to clean ventilation holes that are not so easy to clean with a rag.

The gel can also be used to clean the inner pockets of bags, clothes, small interior details and any hard-to-reach places. The slime is also useful for cleaning the car. The main advantage of this tool is that you can clean the equipment without fear that water gets into contact, and the thing will be irretrievably damaged.

Slime not only cleans any surface from pollution, but also has bactericidal properties. This is especially important in the case of keyboards, as a huge number of germs accumulate on the buttons, especially if several people use the technology, for example in a crowded office. It is very easy and convenient to use the slime, you can use the whole piece, or you can tear off a small piece, depending on the size of the surface to be cleaned. Less dust settles on cleaned surfaces.

Storage.

After use, the gel is washed with water; it must be stored in its original packaging so that it does not dry out and deteriorate. Slime can be used several times until it loses its stickiness. It must be stored at low temperatures so that it does not lose its properties and does not spread.

You can clean the keyboard in just a few minutes, it's done like this:

Take the slime out of the bag;
Put on the surface to be cleaned, let it spread as much as possible over the surface, if necessary, spread with your fingers until the slime penetrates into all the recesses;
You can roll the slime on the keyboard, pressing lightly;
Carefully, starting from the edges, peel off the slime from the keyboard and wash it under running water.
Put on paper and wait for all the moisture to evaporate;
At the end of the work, put the slime back in the package and close the fastener.

Super Clean Keyboard Cleansing Gel is made in China. Most often, there are sealed packages weighing 80 grams. with Zip-Lock fastener. The colors are different, but most often they come across green and blue, there are transparent or matte. The instructions on the package are only in Chinese, but the description is replete with pictures, so everything is understandable without translation.

The cost of slime usually does not exceed 150 rubles.

We need:

Sodium tetraborate (sold at the pharmacy) - 1 bottle
Silicate glue or PVA - 250 ml.
Dye
Any container of a suitable size and spoon.

By the way! Sodium tetraborate (borax) in this case acts as a thickener, but in addition it has a number of useful properties. Borax is an antiseptic, it is used to get rid of mold in the bathroom, to remove unpleasant odors and wash trash bins. You can make a homemade laundry gel using borax, soda ash, and laundry soap. In horticulture, sodium tetraborate is used to protect plants from fungal and bacterial infections. To get rid of ants, cockroaches and other insects, a bait is prepared with the addition of borax.

How to make keyboard cleaning gel at home:

Shake the glue well. Experiments have shown that not every PVA glue is good for making slimes; Luch brand glue showed itself best.
Pour glue into a container and add a dye, the intensity of the color depends on its amount, in addition to the dyes listed above, you can use greenery, ink from pens, etc. Stir thoroughly so that the glue is evenly colored.
Now add sodium tetraborate while continuing to stir, it is on this ingredient that the viscosity of the mass depends, adjust the consistency by mixing the borax gradually.
When the gel becomes so viscous that it sticks to the spoon, we take it out of the container and begin to knead it with our hands like plasticine.
The result should be an elastic mass that easily stretches and returns to its original shape. If you put a lump on the table, then it will gradually spread. Slime should not be too hard, if it behaves like a rubber ball - this means that you "overdone" with sodium tertaborate, just give it to the children.
Our slime is ready, use it to your health. The finished cleaner is good at picking up dust, dirt, cat hair and crumbs from all surfaces.

You can store it by putting it in a plastic bag in a cool place.

Subscribe and like!
The toy slime appeared in the last century. After the movie "Ghostbusters" people immediately paid close attention to the slimer's ghost. It could stretch in different directions, spread easily and quickly change its shape. After that, this toy was born with which not only small children, but also quite adult people play.
Slime can naturally be bought at any store, but I will tell you how to make a slime with your own hands.
In this video I will show you how to make a slime with your own hands and improvised means.
For this we need
1. We buy PVA glue in the store, only white, preferably the freshest, 100 grams is required.
2. We also need borax or sodium tetraborate, which is not known to many. You must use a solution of 4% or you can use ordinary powder. Borax (usually sold in any pharmacies and there are no various restrictions on it). Sodium tetraborate (very often used by jewelers, you can still buy it in a store with chemical reagents, as well as in radio goods).
3. To make the slime more visual, you need to choose a color, I usually prefer green, so we take brilliant green or any other food coloring, for example, gouache.
4. You will need a mixing container (glass) and a stick.
Let's get started.
We take PVA glue (100 ml) - Stirring the glue homogeneous mass, gradually pour in a little sodium tetraborate solution there, stir and add dye (brilliant green paint or any other food coloring)
- All! Now we know how to make a slime at home.
Lizun toy appeared in the last century. After the movie "Ghostbusters" people immediately drew attention to bringing Slimer. He could pull in different directions, it is easy to spread and quickly change their shape. After which came to light this toy which is played not only young children, but rather adults.
Slimer of course you can buy in any store, but I will tell you how to do licks his hands.
In this vidio I "ll show you how to make licks her hands and improvised means.
For this we will need in
1. Buy in the store PVA glue, white only, it is desirable that was very fresh, it takes 100 grams.
2.Esche we need a drill or do not know many sodium tetraborate. It is necessary to use a solution of 4% or may be a conventional powder. Borax (usually sold in all pharmacies and various restrictions on it is not). Sodium tetraborate (very often it is used by jewelers, you can still buy in the store with chemical reagents, as well as in radio and electronics).
3. What would make a great visual Slimer, you need to choose the color, I usually prefer green, so take Zelenka or any other food coloring, you can for example gouache.
4 . Will need mixing vessel (glass) and stick.
Proceed.
Take PVA glue (100 ml) - Stir adhesive homogeneous mass, gradually pour in there for a little bit of sodium tetraborate solution, stir and add the color (paint or any other brilliant green food coloring)
- Everything! Now we know how to make home licks.

Video How to make Lizuna, Cleaning for the keyboard of the Football vine show channel

Today I will tell you how to make a slime that cleans the keyboard. This is a very useful invention, as with its help you can effectively clean the keyboard from various dirt, debris, as well as ordinary dust. Slime is made very quickly and from fairly simple and available materials.

Materials required to create a slime:

medium jar of PVA glue;
sodium tetraborate;
mixing container;
gouache;
pencil;
plastic bag.

Step-by-step instructions for quick preparation of slime:

Take a suitable container and pour all the PVA glue from the jar into it.
Now let's add color to the future slime. Take the prepared gouache and add it to the glue. The color may vary according to your taste, but you should know that the more gouache you add, the more intense the color of the finished product will be. Take a pencil - it will be more convenient to add.
Now mix the gouache and glue well with a pencil. The mass should become homogeneous (in color and consistency) - the gouache must be completely dissolved in the glue.
Now it's the turn of sodium tetraborate. Add about one tablespoon to the mixture and mix well again with a pencil. If added correctly at this stage, the mixture should thicken.
Now add another third of a tablespoon to the container and do not forget to mix everything. The mixture becomes even more compact, it becomes like a viscous dough. The pencil must be stirred until it can stand in it.
Now take a suitable bag and put it on your hand. Remove the mass from the container and turn the bag inside so that it is inside. Knead the slime with your hands. The result of such work will be a mass that easily stretches, stretches, crumples and does not break. This slime remarkably attracts debris, dust and dirt, and after strong stretching, it returns to its original position.

Now that you know how to make a slime that cleans the keyboard, you don't have to be afraid of dirt and dust on grid-type surfaces (mobile phones, calculators, in car dealerships, etc.). The slime made in this way has good sticky properties, which makes it an excellent aid in penetrating hard-to-reach places. You can use it until it gets very dirty, then it is better to prepare a new one.