How to remove plastic doors from hinges: step by step instructions. How to remove a plastic door from its hinges yourself How to remove a metal-plastic door from its hinges

Plastic doors are attractive and affordable elements that have, today, a wide range of uses. Entrance doors made of PVC can be seen in public institutions, private offices, production workshops. In private construction, plastic doors are used as balcony doors, doors to the loggia, garage, summer kitchen. Often, in order to repair the plastic sheet, replace glass or hinges, the plastic door has to be dismantled. How to remove the canvas without professional help - look below.

Plastic doors are attached to two door hinges located on one side of the door frame pillar. Door hinges for PVC structures differ in the way they are attached to overhead and applied ones. For balcony doors, overhead hinges are used, which allow you to adjust the door. For pendulum entrance and interior plastic doors, applied hinges are used, which look like a door closer.

To easily and quickly remove a PVC door, you need to know the arrangement of door hinges.

A set of hinges for plastic doors consists of a leaf part with a metal insert, an aluminum frame part with pins for fastening, a metal alloy spacer for connecting the frame and leaf, and fasteners.

The components of the hinge allow you to adjust the door without removing it.

So, in order to adjust the door horizontally, you need to use a hinged template (metal tab), vertically - adjusting screws that are located under the decorative caps.

In order to choose a new loop to replace the old one, you must consider:

Door size and weight;
The design of the door frame and sashes;
profile wall thickness;
Way to open the door.

It is possible to replace the hinge only after removing the plastic sheet. To replace the door hinge, you will need pliers or a side cutter, a punch and a hammer.

Dismantling the entrance plastic door: how to remove it from the hinges

Removing the plastic front door from the hinges may be necessary if one of the hinges has been damaged or the door has failed and needs to be repaired. In addition, the door will have to be removed in order to lubricate the hinges with oil.

Specialists in metal-plastic structures advise lubricating door hinges at least once a year: this allows you to extend the life of the structure.

The procedure for removing the entrance PVC door from the hinges has certain nuances, because the entrance door, unlike interior and balcony doors, is equipped with reinforced hinges and anti-burglary mechanisms. Due to the heavy weight of the structure, it can be quite difficult to work alone. In addition, the entrance metal-plastic door is usually hung on three hinges.

In order to dismantle the entrance metal-plastic door, you must:

Disassemble all three boxes: remove the protective decorative trims by prying them with a screwdriver.
Press on the pin of the upper loop with a punch and pull it out of the groove at the lower end with the help of pliers.
Do the same with the middle loop.
Raise the doors up by 50 mm, and tilt the leaf towards you. If the canvas is heavy, then this can be done by moving a lever under the door.
Rotate the doors to actuate the bottom leaf rotary lever and remove the door from the bottom hinge.

After dismantling, you can lubricate or change the hinges, carry out work to repair the web. After the completion of the repair work, the main thing is to install the door evenly so that the canvas opens and closes freely. You can adjust the position of the door after it has been installed.

Instructions: how to remove a plastic balcony door from its hinges

The design of balcony doors does not differ much from the arrangement of ordinary interior doors: a balcony door also consists of a door frame and a hinged leaf. You can dismantle the balcony door from the hinges on your own: due to the small size and weight of the door, you can work without outside help. In addition, the balcony door is often installed with only two hinges, which allows you to work quickly.

In order to remove the PVC balcony door from the hinges, you must:

Remove protective caps from hinges.
Close the door, but don't block it.
Press the pin of the upper hinge so as to squeeze its end out of the groove.
Grab the pin from the bottom of the loop and use the pliers to pull it out of the groove.
Tilt the door towards you and gently pull it by the handle towards the ceiling so that the lower one releases the lower pin.
Remove door from hinges.

After that, further repairs can be carried out. The balcony door is installed in the reverse order: first, the canvas is put on the bottom hinge, and then leans against the plane of the door frame. Next, the upper loop is assembled: an axial cylinder is inserted into the loop mechanism from below. At the final stage, protective caps are put on the hinges.

How to disassemble a plastic door

Repair of a plastic door, in some cases, can be carried out without removing the canvas from the hinges. So, for example, without removing the door, you can replace the glass in the frame, the plastic sash in the leaf. The door consists of a frame, a double-glazed window and a PVC panel. The elements are held in the frame by glazing beads.

In order to disassemble the plastic door you need:

Prepare the instrument. For work, a flat-blade screwdriver, a sharp knife for a planer are suitable.
Insert a screwdriver into the groove between the bead and the door frame and pry off the bead.
Dismantle the top and bottom bead, then the side ones.

After that, the glass or plastic panel can be easily removed and replaced with a new element. Beads are inserted back without additional fasteners.

How to remove a plastic door from its hinges (video)

Plastic doors, today, can be seen on almost any construction site: they can serve as entrance, balcony, interior doors. In order to replace the plastic door or hinges, if necessary, it must be dismantled. You can remove the doors from the hinges without professional help. This is done quite simply. The main thing is to strictly follow the instructions, and you will be able to dismantle quickly and efficiently!

During repairs in an apartment, office, private house, it often becomes necessary to dismantle complex structures, such as a door and a door frame. Proper execution of this task will not only save the structure for reuse or repair, but also not damage the wall, which has a weak spot near the doorway. How to remove a wooden or metal-plastic balcony door will be discussed in this article.

Disassembly is a matter of minutes. However, this step must be justified. It makes sense to remove the balcony door only if:

the door is partially damaged and does not ensure the tightness of the room;
the canvas has a curvature, the double-glazed window is damaged or completely broken;
the lock does not provide a snug fit of the canvas to the box;
door curtains have exhausted their durability and should be replaced;
the room is being renovated, replacement is necessary to comply with the design.

The reasons may be different, but it is worth remembering the generally accepted rules that will help to complete this stage with minimal losses:

Replacement of a plastic balcony door is made in the winter only as a last resort.
If a complete replacement of a plastic or wooden balcony door is implied, then you should take care of a new box in advance and start installing a new canvas immediately after dismantling the old one.
For dismantling, the participation of at least two people is necessary, where the first person performs removal manipulations, and the second holds the canvas, insures the first.

Necessary tool for the job

For quick dismantling, you need to have the right tool at hand. For wooden and PVC panels, this set will be different due to the difference in the method of fastening and the material of manufacture.

Tool for dismantling the wooden frame structure:

Phillips screwdrivers, straight slot.
Powerful mount or large curved crowbar.
Ax with a wide blade (flat blade).
Good hammer.
Fine-toothed hacksaw (better back saw).

This basic set allows you to quickly remove the door and disassemble the box without damaging the wall. Of course, experienced craftsmen can add to the list a screwdriver, a drill with a hammer, a crowbar for dismantling platbands, but we offer a set that is sure to be found in the workshop of every man.

Plastic box removal tool:

Powerful pliers or wire cutters.
Pry bar, crowbar or solid board to create a lever.
A set of hex screwdrivers of the right size.
Powerful Phillips screwdriver.
Thin drift or blunt nail.
Sharp knife, chisel.

The set of tools differs markedly due to the characteristics of the material, different weights of the leaf, the features of dismantling standard curtains, and the complex mechanism for the balcony door.

Removing the plastic door

When all the necessary tools are found, it's time to study the algorithm of how to remove an unnecessary plastic door to the balcony.

The order of work is as follows:

It is necessary to fully open the mechanisms of the lower and upper hinges. To do this, the plastic plugs that close the mechanism are hooked with a knife. After that, you need to open the door a little. By inserting a drift into the upper loop, knock out the axial cylinder with a light tap. If it does not fall out freely, you need to pick it up from below with pliers, turning it and pulling it down. In this case, the punch should be pulled out of the groove. At this moment, the assistant master must hold the canvas in a strictly vertical position so that it does not lean towards the ground, does not begin to “pull out” the fasteners from the fragile frame.

After that, the door is opened at 90 °, lifted up. The lower pin cannot be pulled down - it is built into the fastener and cannot be disassembled. This operation should be done together, using a lever: scrap or board must be wrapped with a thick cloth (so as not to damage the lower edge of the canvas). The lever must rest against the lower plane and the floor. A little effort will be enough to rip the door off the bottom hinge. Having slightly tilted it towards himself, the assistant master must hold the door after it jumps off the axial cylinder of the lower hinge. Now the plastic balcony door has been dismantled. Can be repaired or replaced.

If there is a problem in the box itself under the plastic door, it is dismantled:

It’s worth starting with the dismantling of decorative platbands. This is done with a screwdriver, spatula or knife. The platband simply comes off the box itself, like a designer part.
After that, the slope panels (inner box) are removed. The process is similar to the previous point.
Then it is necessary to remove all mounting foam. A spatula or a thin-bladed knife works well for this.
The next step is to unscrew the fasteners of the box from the wall. To do this, you need a screwdriver or screwdriver.
Now you can start dismantling the frame. A mount is inserted into the gap between the box and the wall, the frame breaks out into the room.
The last step is to clean the wall from the remnants of mounting foam, fasteners.

Removing a wooden door

The process of dismantling a wooden structure is different from dismantling plastic. The sequence of execution of work differs in fewer actions, but takes much more time.

It is necessary to open the balcony door, insert the crowbar between the floor and the lower plane. Usually the canvas is removed from the curtains without much difficulty. Problems begin if the door hinges are rusted and there is no way to easily remove them from the hinges. In this case, there are two options:

Lubricate the hinges with liquid oil. By opening and closing the door, you can achieve almost complete impregnation of the curtain and then try to remove them. If this method does not help, you need to spray a solvent on the rusty curtain. Powerful chemicals will corrode the rust in a few minutes and the door will succumb.
If the cause is a curved curtain, there is no way to remove the door from the hinges; you must remove it together with the hinges. In this case, it is necessary to break the paint that covers the fastening of the air curtain to the box, try to unscrew the screws with a screwdriver. At this time, the partner must hold the door so that it does not tear out of the box during the dismantling of the last screws. This step is justified by the fact that the damaged curtains will still have to be replaced - even if you manage to remove the door, you cannot put it back on the damaged curtains.

Dismantling a wooden box is carried out in several steps:

With the help of an ax, the outer casings are removed. The ax blade is inserted under the platband, driven to the maximum depth with a hammer. Using the ax as a lever, you can quickly tear off the casing from the box.

There are two ways to remove a wooden box from the opening:

If it is possible to remove the fixing nails that fasten the box to the wall from the inside, then you need to pull out all the fasteners, then remove the whole box. This can be done by tapping with a hammer or an ax along the perimeter of the structure. In order not to damage the tree, you can use a board that will distribute kinetic energy over a large area and prevent damage to the wood.
Otherwise, the box is cut with a hacksaw at the corners, the sides are taken out separately.

After dismantling, the walls must be cleaned of dirt, residues of fasteners.

Door installation process

This step depends on whether the box has been dismantled. If it is necessary to replace only the canvas, then the installation process repeats the dismantling algorithm in reverse order. The main thing is not to damage the new canvas with the box, because all the work is done by two masters, where the second number insures the master, firmly holds the canvas from accidental falling or damage.

It is easier to change a wooden door - it is simply put on hinges and then adjusted to the frame with rubber gaskets (provided that the dimensions of the opening are taken into account when assembling a new leaf.

Plastic involves a more complex process, where it is important to raise the pins in time and achieve maximum fastener strength.

Harder to set up the box. Installation must begin with the processing of the walls: drilling new holes for fasteners (it is not recommended to use the old ones). PVC and a wooden box are inserted in a similar way: in the already assembled state, it is mounted in the opening, tacked by the installation. For a wooden frame, it is better to use powerful self-tapping screws with a dowel (quick installation). Less commonly, special nails for concrete or liquid adhesives are used. PVC panels are mounted on a mounting frame - thin metal plates.

Metal-plastic are now gaining more and more popularity, so it would be useful to learn the basic rules for servicing its individual elements. In this article, we will consider how to remove the plastic door from the hinges on the balcony in case of repair or replacement.

Fastens to the opening with metal loops. There are usually two or three of them to evenly distribute the load. They are equidistant from each other, and are closed from the outside with special plastic caps. Each hinge, in turn, consists of two metal elements: fastening the frame of the double-glazed window and directly to the door frame.

The redistribution of weight and load is carried out by a remote sleeve. If necessary, it is best to dismantle the balcony door leaf with the help of an assistant, because the design is quite heavy. Careful actions without unnecessary jerks and efforts will ensure the desired result and the integrity of the structure.

Why you may need to dismantle:

Repair of individual elements of the door structure.
Moving large furniture.
Temporary measures in case of repair in the main or balcony room.
Door leaf replacement.
Expansion of the doorway.
The annual lubrication procedure for the door hinges will also require the removal of the door leaf.

Door fittings, despite serious loads, can easily be damaged during careless operation. That is why, if it is necessary to remove, you should be extremely careful and first study the instructions below.

How to remove a balcony plastic door

The dismantling process consists of several stages. In the design of plastic doors, the most vulnerable point is the glass panel, which is why additional help is needed to hold the canvas and prevent it from being damaged.

Before work, it is necessary to prepare tools: a screwdriver, a set of hexagons, pliers and any lever in order to lift the door from its hinges (mount, crowbar, wooden beam).

Work sequence:

Reverse installation

Instructions on how to remove the door leaf would be incomplete without the reverse sequence - installation. To do this, you will need about the same set of tools and an assistant with whom the process will be easier and less traumatic.

How the doors are installed:

The door leaf is installed opposite the hinges. Initially, it is necessary to align the position of the lower hinge, from which the installation will begin.
Bring the hole in the lower loop onto the support rod, in parallel adjusting the location of the web relative to the rest of the loops.
Close the door leaf without pressing the handle.
Start alternately the axis of the middle and upper mechanism. The correctness of the action is determined by the click that the pin makes when it hits the desired position.
Using a hexagon, fasten the hinge fasteners.
Check the opening/closing process.
Install decorative and protective plastic lining.

The balcony door is not very heavy, but during its installation it is important to avoid any distortions. That is why it is better to mount the structure together.

How to care for loops

After dismantling the balcony door, it is better to revise the hinges, as well as lubricate the mechanism. This will help extend the useful life and prevent jamming.

What needs to be done for this:

Clean hinges and all connecting elements from possible dust and dirt. It is better to do this with a piece of rag soaked in gasoline.
After treatment, thoroughly wipe the contaminated areas dry.
Lubricate the rubbing structural elements with special mineral oil. If lubricants are used in the oiler packaging, periodic maintenance can be carried out without removing the door from its hinges.

Important: The use of unsuitable substances for lubricating door hinges is not permitted. There should be no solid particles in the lubricant, this can lead to failure of the entire mechanism. It is better to purchase a special oil, which can also be used for periodic maintenance of metal-plastic windows.

Plastic doors are gradually replacing other types of door models and do not have a simple design mechanism. The plastic sheet is connected to the box with the help of special hinges, which are one of the main parts of the door block. During the operation of a plastic door, some problems may arise in the form of mechanical damage or force majeure. In this case, repairs are required, for which you need to know how to remove the plastic door, and the removal process is different from performing the procedure with a wooden sheet. Before proceeding with this work, it is advisable to read the instructions.

The plastic door block is slightly different from the usual ones. The main elements are the box and the canvas, fixed on special hinges. They usually use from three to four pieces of fittings, this makes it possible to distribute the entire load evenly.

Loop fittings are placed at the same distance between them, the upper and lower products are fixed in the direction of the box. Fasteners are hidden under special linings with plastic caps, which makes the door block integral and aesthetic. Blocks often include an insulating glass insert, which requires extreme care when dismantling and installing the leaf.

The main reasons for the dismantling of plastic structures

The main reasons for removing the canvas can be:

malfunctions, to troubleshoot when the mount is displaced to the side or it breaks, adjustment is required, for this it is necessary to remove it from the mounting hardware;
replacement of a damaged part or product, when it is necessary to replace the hinges or the canvas itself;
repair of the premises, in order to preserve the appearance of the door unit, it is necessary to remove the canvas and pack it in a protective material;
an increase in the size of the doorway, the canvas is removed to expand the opening, for example, for transporting bulky items.

Removal of a plastic door can be carried out when replacing it, in the event of repairs in the room, or if its structure needs to be repaired.

Regardless of the reason for the removal of the product, the work requires the utmost care, both during dismantling and reinstallation.

The main types of hinge fittings

Plastic door blocks are attached to the box with various types of hinges, which have their own technical features.

The main types of accessories include:

Card. This fitting differs from the standard conventional fasteners only in external design. When removing, it is enough to unscrew the screws, which are clearly visible and distinguishable.
Mortise. They are rare on plastic door blocks, when dismantling, the fasteners are turned out in full, simple pulling off the pin is not possible.
Screwable. One of the more common options on the balcony door, the fastener structure is similar to the card type.
Invisible fixture. Aesthetically attractive door block, which is laborious to remove, all fasteners are hidden in a special box, so a complete dismantling of the leaf will be required.

The type of hinges is quite easy to install with the help of visual inspection and then proceed with dismantling.

Balcony construction made of plastic

A plastic construction with a double-glazed window is in most cases used as a balcony. Loops for them are mainly used in two types: card and screwed. To repair or replace the door, if necessary, you will need tools such as: screwdrivers of all kinds, a set of hexagons, pliers, a knocker, a mount.

When removing the balcony door from the mounting fittings, it should be slightly opened, i.e. Position the door handle parallel to the floor surface. Remove the decorative caps from the hinges. After that, it is necessary to insert a doboy into the upper hinge fittings and carefully, without much effort, knock out the axial element, otherwise, the hinge mechanism can be harmed. When the edge of the connecting pin appears, it should be picked up with pliers and carefully removed from the slot.

The canvas must be opened at about ninety degrees, otherwise, when removing the lower loop, it may bend. The door leaf tilts to its side, and it is desirable to have an assistant, since the double-glazed balcony door is heavy and if it falls, the lower fixing mechanism can be damaged. The open canvas rises up by about 5 cm, for this a lever is inserted into the location of the lower flaps, rests against the floor surface and is fed to the ceiling. As a result of this, the canvas jumps off the pin where the lower loop is located. There are no fasteners in this place, there is only a rotation rod, which will make it easy to remove the door.

In a similar way, plastic interior doors are removed from the hinges. But before starting dismantling, you should examine the type of loops and then determine your actions.

Upon completion of the dismantling of the door to the balcony, you can begin to repair its body, fittings or replace the double-glazed window. After completing the repair work, you can proceed with the installation in its original place. To return the canvas to the opening, you must perform all the steps in reverse order.

If the canvas clings, then at the end of its installation it is necessary to carry out adjustment using special bolts. At the end of the installation and adjustment work, decorative caps are put on and the function of the door is checked.

Let's imagine a situation: your new acquisition, your pride - a plastic door - has stopped closing. After the installation, carried out by the company's employees, there were some doubts about the correctness of the installation. The design was closed with some distortion, the lock was broken or closed only if force was applied. What to do? Again to call the same "workers"? No, you need to do it once and conscientiously.

How to remove the door?

During the repair process, you may need to remove the canvas from the hinges, but how to do this? Let's tell now! Let's start with a little theory.

General device

The material used for the manufacture of doors is polyvinyl chloride. Plastic is an indispensable material in terms of water resistance. Moisture threatens both exterior and interior doors. With external doors, it is clear that this is direct contact with the humidity of the atmospheric air, and condensate from internal evaporation.

Interior doors face particularly damp conditions in kitchens and bathrooms. Of course, plastic is only a coating; steel plates are attached inside the structure. In addition to the canvas itself, the kit includes a non-separable door frame. (photo) In order for the door to fulfill the functional requirements, it is necessary to have a special type of parts in the door structure called fittings.

Entrance plastic structures are quite heavy, because they have a multi-chamber structure and burglary protection. In connection with this and with other features of this type of device, special loops are used to connect the web to the box. This is the main part of the fittings, the main part of the design of the plastic door. Loops are divided into:

removable;
fixed;
screw;
card;
invisible.

The very name screw hinges, along with overhead and applied ones, speaks of the method of attaching the hinges to the door.

Hinges for plastic doors are made of highly durable materials based on Teflon. In addition to the fact that the hinges carry the load from the door leaf, they must ensure easy walking of the door and a snug fit of the leaf to the frame.