How to choose a greasy roller - views, sizes and tips how to choose the touch tool for painting. Paint rollers: varieties and features of the price of acrylic paint

A professional painting brush can be applied paintwork no worse, and in some cases even better than a roller. But the area of \u200b\u200bceilings is always at least several square meters, so to accelerate the finishes paint them in most cases by painting rollers - the tool "by squares", using brushes only on problem areas. The significance of the rollers in the decoration says that the requirements for them are set out in GOST 10831-87 "Parking rollers", which are taken into account by domestic producers of the painting tool.

The painting roller - the device is simple and effective that it does not interfere with manufacturers constantly improve it, and there are many models of this tool on sale. Even having some experience in performing painting works, in such a variety is difficult to navigate and decide what type of roller give preference in the existing situation with the repair. And the lack of an idea of \u200b\u200bthis tool is fraught with critical errors - when painting, you can turn the paint coating during painting, after which it will have to read it, and prepare the surface to finish again.

Consider how to choose the right roller for painting the ceiling - the base on which any type of work is more complicated.

Device, types and characteristics of the painting roller

The classic paint roller consists of the following parts:

1. The handle - from its characteristics (sizes, configuration, material of execution) depends on the convenience of performing the work;
2. Metal rod-axis - the strength of this part determines the reliability and durability of the instrument;
3. Rotating cylinder-roller - in the form of a sleeve or frame, for equipping a fur coat (cover, plush);
4. Fur coat - from natural fur or synthetic, replaceable or glued;
5. Telescopic or collapsible handle - optional.

Painting rollers are produced by four designs - global, double, frame and universal, differing from each other, but having a general principle of operation.

For painting ceilings, all four modifications of the instrument are suitable, but homemade masters are popular, the assortment of such devices in the trading network is wide, and the roller replacement procedure is most simple.

Despite the simplicity of design, painting rollers have many characteristics, but the main criteria for choosing when buying this tool are:

• fur coat material;
• wavelength length;
• diameter and length of the roller (strip width with painting).

How to choose a rairy roller

Each characteristic of the selected roller is responsible for the specific parameter and must comply with the specific application conditions. At the same time, there is a situation that any tool of this group will suit for painting the ceiling. But in such cases, the results of the use of various types of rollers will still differ - the consumption of material, thickness and texture of the coating, the degree of concomitant pollution of the room.

Therefore, the choice of painting roller is produced by each of the listed characteristics, allowing or excluding deviations - depending on the categorization of the requirements of a particular parameter.

How to choose a paint type roller

The choice of roller, or rather, the fur coats under the species of paintwork is the main criterion, it is necessary to consider it first, since the cost of the error can be a defective coating. Consider compatible combination of plush and paints.

Water based paints

These compositions include water-dispersion and water-emulsion paints (ICT and EEC), acrylic and polyurethane varnishes. All these LKMs are suitable for use in residential premises, but when finishing the ceilings in apartments with concrete inter-storey floors, it is more commonly bypassed with paints, without a varnish coating.

To work with an ACC and EEC, the optimal equipment of the roller will be a coat of polyamide-maker-produced with oil synthesis. The threads made of polyamide fiber are durable, the wint of the fur coat from this material when the LKM is not sticking out with the roller, the material effectively absorbs, holds and gives the paint, without leaving the fibrous fragments in the surface of the surface.

At the end of the work, the polyamide fur coat is easily messed up, which contributes to the durability of such a equipment - the possibilities of multiple application.

Professionals highly appreciate the products of the German company Storm, specializing in the production of tools for painting work. Polyamide rollers of this manufacturer in the Russian market are represented by several rules that are most in demand from which are Multicolor and Expert.

Painting rollers storch multicolor Designed for coloring smooth and slightly rough surfaces by any type of water-based paint, so their polyamide coats have a middle-length pile (12-21 mm). At the manufacturer of the fur coat of this model are subject to special pre-processing - for an hour are washed in a special car with water of a certain temperature, which ensures high performance in the future.

Storch multicolor painting rollers before use must be soaked in clean water for half an hour.

Polyamide skins Expert rollers storch Also have a pile of medium length and are designed to work not only with any kind of paints on water based, but also acrylic, polyurethane varnishes. Fur covers of this model are connected by another technology - "endless thread", which ensures the creation of paintwork not smooth, but slightly embossed texture.

There are many other polyamide rollers in the Russian market, but when choosing a tool, not such well-known brands it is better to use the advice of professionals who have already used them.

In addition to the tool with polyamide coats, water-based paints can be applied by other rollers - fur, foam, polyester or polyacryl nuts. The cheapest option will be a foam tool (VP marking), but it is quickly wearing and is good for working with water-dispersion compositions, and when applying water-radiation paints leaves air bubbles.

In the group of foam rollers, there are more expensive types - with flock spraying, they create good coatings and are more durable than ordinary models, but still suitable only for working with LKM water-based.

Solvent-based paints

This LKM group for finishing the ceilings in the apartment is used much less frequent than water-based compositions. But if necessary, such paints are applied with rollers with fur coats from natural fur (sheepskin, cygiaki), since most covers from synthetic materials are not rack (in different degrees) to the effects of active chemicals contained in them. The fur coats from the natural sheepskin is good to use well when working with alkyd varnishes.

The disadvantages of such a tool are its relatively high price and the need for a fair amount of solvent when washing at the end of work. It is necessary to rinse a roller carefully, with a change of detergent, otherwise the dried residues of paint will make it unsuitable for further use.
For thick two-component varnishes and paints used to cover art elements on the ceilings, special coats are used from the following materials:

1. Stabilized and compacted nylon;
2. High density polyurethane foam or flock coating;
3. Monofilament polyester;
4. Velours;
5. Microfiber.

Selection of roller on the surface of the ceiling surface

Painting ceilings with a smooth and textured surface requires the use of various tools.

Smooth ceilings paint rollers with a short or medium length of the pile - the flow rate of the LKM on painting such grounds is several times less than the textured, so there is no need to gain a coat a lot of paint. But the short pile is not suitable for water-based compositions, but it is perfect for oil paint or varnish.

For painting ceilings with decorative texture, a long pile roller will be required (more than 20 mm) - such fibers when you press the roller will penetrate into the deepening of the relief and paint the base completely. In addition, a long pile allows you to score more than LKM on the fur coat - taking into account more paint consumption on such a surface texture.

In this situation, rollers with polyacryl or polyester coat are suitable. It should be noted that polyacryl coats have thicker fibers absorbing more paints than polyester, and therefore creating coatings of greater thickness.

For coloring of embossed surfaces, rollers are made with a lining under the coat. Such a lining is completely covered with a roller and contributes to the best fit of the moss of the fur coat to the surface of a complex texture, while not absorbing the paint in order not to lose the tool.

Select roller sizes

The tool sizes are an important group of parameters, which includes the width of the working part (L) and the diameter (D) of the rotating cylinder.

The working part of the tool depends on the performance of the work and the possibility of coloring problem areas - niches, boxes.

The diameter of the cylinder is determined by the speed of its rotation: larger diameter - less speed and, accordingly, when the roller moves, the paint is less sprinkled.

According to these indicators, rollers for painting all surfaces can be divided into 3 groups:

1. Mini is a small-sized tool with L to 150 mm at D 50 mm;
2. Midi - l from 150 to 250 mm with a range of 50-80 mm diameters;
3. Maxi is the so-called facade, with l more than 250 mm with D from 80 mm.

The dimensions of modern global rollers are in the following ranges: L - from 50 to 250 mm, D - from 50 to 150 mm. Under the painting of the ceilings most convenient models of the midi group, the appeal with which does not require high professionalism and physical effort.

Conclusion

Knowing the main criteria for choosing a painting roller, to acquire the necessary tool in today's saturation of the tool market is not difficult. It is better to navigate when choosing in a variety of models will help view this video:

It should be borne in mind that the cheap roller is unlikely to meet your expectations when performing a high-end finish. But when choosing a more expensive tool, it should be attentive - timely detection of the coat defect will help to avoid a situation where in the process of painting it will suddenly need to replace the defective roller.

Calculate the cost of painting the ceiling!
Make a list of work and get the calculation of the cost in 10 minutes from the brigades and masters!

Repair is a long-term event and requires solidary preparation, financial and temporary costs, as well as the acquisition of theoretical and practical knowledge. Staining is one of the most common and spectacular tricks when decorating surfaces. A huge variety of colors and shades, apparent techniques and textures give plenty of fantasy. However, many nuances are hidden for the seeming simplicity of this finishing option: what kind of paint to choose how to properly treat the surface in which the kel is to be applied to the color to lay exactly, and the annoying drifts and non-replete places did not spoil the general view of the project and the nerves of the grief-malaria.

For coloring walls, you can use a different tool, for example, brushes, airbrush or roller.

Roller - Golden Middle Between Nei. It has a large number of modifications and options for rollers. Prococracy guarantees almost perfect, moderate paint consumption. Ease of use, ease of care and the optimal cost create the perfect combination of "price-quality". In addition, with this device, you can apply a decorative pattern, screen pattern and even add texture.

Features of the device

The malarious roller is a device of a simple design consisting of a handle and frame of the curved shape, which is mounted in coloring cylinders with different surfaces. The principle of its action lies in absorption of various substances when the drum immerses in them and the transfer of these compositions to the painted surface.

The advantages of the roller:

• surface treatment speed;
• quality of performance of work on applying;
• ability to add additional effects on the plane processed;
• reduction of the amount of consumed materials;
• large model range.

Progress does not stand still, and today you can easily find such versions of the execution of this tool, like a roller for the procession of angles or a roller with an elongated handle for staining the ceiling and high facades. Special attention should be given rollers with an automatic or piston feed of the coloring substance. This tool is ideal for processing large flat surfaces. It is applied not only if necessary to apply paint, but also for other substances - adhesives, varnishing, liquid wallpaper, soil. The selection of the roller modification will be almost entirely based on the characteristic of the applied fluid.

When changing the substance only to change the surface of the roller, and the roller is ready to work again. But it is important to take it into account that the roller fur coat can be produced from various materials: fur, foam rubber, polyester, polyacryl, felt, rubber, wool, nylon.

To explore all the tricks during the selection of fur coats, it is necessary to take into account the features of various types of coatings, as well as recommendations for their use.

Views

Since the types of rollers in the store presented a great set, it is worth understanding the criteria for their selection.

Determine with the principle of work of the roller.

• The usual submersible.
• With a piston paint feed system - its handle is produced with a reservoir accommodating immediately half liters of substance. The substance is uniformly wetting the rotating surface of the roller.
• With automatic transmission of the coloring agent. The device pays for its high cost solely on a large space. It is characterized by high productivity and efficiency of consumable materials, as this device is a device with a dispenser.

There are two principles of his work:

• the substance comes through the hose when using the pump;
• the roller is placed in the cavity, and already from it there is wetting the working surface of the drum.

By the nature of the works of the rollers are:

• for exterior (tougher and reinforced);
• for interior work (smaller).

The tool is distinguished by the type of roller coating:

• Fur- Universal tool for painting walls. Saves paint, it evenly inflicts layers, processes uneven and rough surfaces well, neat in operation (from him at least splashes). It may be made of natural fur or from synthetic analogs (polyacryl, polyamide), which also differ also along the length of the villi. There is a rule: the more irregularities, the longer the pile. One "but" - the pork remains on the surface being processed.
• Poropolon - Apply for a very limited set of paints. It has the lowest cost, but is short-lived, neakkurata (too much splashes), badly cries irregularities, uncomfortable on large areas. It is not recommended to paint the walls - too many drowshes. The higher its density, the durable will be roller.

• Vellar- Used for painting, applying varnishes. Dense string, but this is a tool for professionals. Working with it is neakkurat, characterized by a large number of splashes. The consumption of substances is slightly increased by absorbing the surface of the roller. The cost is comparable low.
• Nutty or rag - You can use in working with any paints, durable, but splash a lot of material, therefore it is worth abide by caution.
• Flock and others with a smooth surface - Used only for smooth, well-prepared planes. Durable and durable, have low cost.

Painting of the walls can be carried out not only by the method of painting, but also by applying a pattern or texture to decorating to decorate with protruding on their surface pattern.

The rollers are divided into the height of the Village:

• High pile. Hair height 18-22 mm. Ideal for working with brick masonry, plastered, concrete surfaces.
• Medium pile. Hair height 11-12 mm. Use when working with plasterboard, wooden areas, as well as concrete and plaster. Can absorb paint well. You can carry out work at high humidity of the surrounding space.
• Short pile. Hair height 5-6 mm. Apply when lacquering and painting wooden and metal surfaces. Paint spend economically.

It is worth correctly picking up the width of the roller.They are three sizes.

• Short. Size - 8-10 cm., Diameter - 10-15 mm. Suitable for processing small areas of landfills, hard-to-reach places.
• Middle. Size - 15-20 cm., Diameter - up to 20-90mm. Convenient when processing outdoor, wall, ceiling surfaces.
• Long. Size - from 25 cm., Diameter - from 80 mm. It is characterized by enhanced fasteners, improved materials of nozzles. Positioned as a tool of professionals.

The rollers are distinguished by the method of the arrangement of the roller on the handle. There are models with a heel, replaced by a fur coat, frame shock-absorbing.

If there are no works in your plans for staining a huge number of square meters, the roller design of the role will not play - you can safely take anyone.

Which to choose?

If you started painting work, it is necessary to correctly choose not only paints, but also a certain type of fixtures. When choosing a roller, you should read the recommendations of manufacturers and sellers about the optimality of a particular option. The most sold rollers for interior work are foam. Porolon is a material that is absolutely not resistant to aggressive compositions, oil and alkyd paints. The only thing for which it fits perfectly - paints and water-based adhesives, primer.

But for working with oil, latex paint and enamels, silicate paints and varnishes perfectly adapted fur rollers. The smaller the length of the villi, the even if the surface should be processed.

Also those who are not afraid of aggressive substances will suit universal velor rollers. They can be used not only for water-dispersion, but also oil, alkyd, two-component paints. To apply these compositions, you can use nozzles from synthetics, natural wool, threads with polyacryl. To give texture it is worth taking a coating tool from silicone, a long pile or rubber overlay.

Another important factor when choosing this tool is the quality of the manufacture of the fur coat: the firmware must be smooth, it is important to have a locking rings. The main thing is to pay attention to when choosing a roller is the quality of manufacture. From the fur coat should not stick into the threads, the firmware must be smooth, and there are stop rings. It is still worth checking the availability of the manufacturer labeling.

Surface preparation

Preparation of the surface to paint - the process, often, longer, rather than itself, but very important. It is worth keeping all the technology, without the exception of any stages.

• Remove the previous surface coating. The detachment of fragile parts of the old paint will lead to a deterioration in the overall type of work and peeling the new painting. The whots or paint on a water-based is removed without much difficulty - inhabitantly flush the plane processed, after which go through the spatula. Removes remove a wet rag. The waterproof paint is a capricious, for its removal will have to work with a metal brush.
• Next, you should wet the surface and, a little waiting, open windows for drafts. The coating should be compressed and you can remove it with a spatula. Another way to be applied to the old paint the wallpaper glue or hubbean, glue the newspapers on it, give dry. Removing the paper layer, you can remove with it and the previous coating. Third way - removal with a drill, but then a huge layer of dust on the surface will not be able to avoid.

• Sharpen the surface if necessary. When removing the upper layer, you can estimate the state of the base of the working surface, check the presence of cracks, voids and irregularities that should be smeared with putty.
• It's good to open with sandpaper all irregularities. There is a nuance with oil-glue putty - it blews the water-making paint.
• Protect the starting and finishing primer. To work in a residential room, you can only use the primer alkyd, acrylic and mineral, the remaining formulations are prohibited. The alkyd mixture is absolutely contraindicated with plasterboard and plaster surfaces.
• Clean the surface from traces of dust, dirt, oily spots. The simplest method is washing the water-soap makeup without abrasive. The plastered surfaces are tested for the possibility of challenge - if the traces of chalk are visible when holding a hand, it is necessary to re-process this section of universal primer.

Works on the preparation of surfaces should be carried out carefully so that the paint lay down better and smoothly.

Coloring

• An order of work on staining is established. First of all, the painting of the ceiling is carried out, then walls and gender.
• Paint scotch mark the boundaries of painting.
• When painting the ceiling it is worth starting with the application of a border of about 5 centimeters without transitions to the wall. If there are ceiling eaves, they paint in the second line. When painting the walls of Kaima are applied in the corners, near the windows and doors. The surface area from one of these places is painted vertically width to one meter. Then, overlapping it, paint the adjacent site. Apply paint needed towards the light.

Flat surfaces of a large area are conveniently painted using a hand tool - roller. The products are a plastic or wooden cylinder, which recorded the fur coat from a certain material. In the cylinder there is a pass-through hole in which the handle is inserted.

The modern building market offers a huge amount of painting rollers of various types and sizes. Products are distinguished by materials from which the fur coat is made. To choose the right tool correctly, you need to know some subtleties.

The cheapest option is the rollers for painting with a fur coat of foam rubber. With their help, you can apply water-based paints. The tool can be used for the priming and sticking wallpaper. As for the emulsion compositions, this roller will not fit. Poropolone products are not recommended for staining the ceiling, because the applied layer will be uneven. The only advantage of the foam roller is low cost. Of the disadvantages, it is possible to note the formation of a large amount of spray during operation and a short life.

Fur rollers can be used with any kind of paint. Products do not absorb too much, so do not splash during work. Due to this feature, the layer is uniform and without bubbles. In addition, fur options fill the paint small cracks, chips and other recesses. The only drawback is the property of the material from the fur coat. This is especially true of cheap products that leave a plurality of fibers on the painted surface.

Roller with fur coat

Vellar in quality coloring is not inferior to fur, and in terms of uniformity of the layer even exceed them. The surface painted by such a tool after drying becomes perfect smooth. But at the same time use the velor product is recommended only to experienced masters, which know all the subtleties of working with such a type of tool. This fur coat is perfect for lacquer coatings.

A native roller for painting walls is used in cases where the speed of work is a fundamental factor. In terms of indicators, the product is practically no different from the two previous species, but it costs a little cheaper. When working with such a tool, it is not necessary to spend too quickly on the wall so as not to spat everything around the paint. It should be noted that a good embossed pattern on the fur coat is imprinted on the walls.

Polyamide roller is used to paint any type, including materials that contain synthetic solvents or conventional water. Polyamide absorbs well and gives paint, it is easy to clean it after use. In addition, this material is resistant to different aggressive environments, so last time. The length of the pile and texture allow not only painting the surface, but also mask small defects and create a relief coating.

The color of the walls and the ceiling can be carried out by means of a roller with polyacryl coat. It is recommended to use the tool only with water-based paints, since components from other materials may be premature to spoil the fur coat. Polyacryl is a cheap analogue of polyamide, and the quality of the material is noticeably worse. The rollers are suitable for staining smooth surfaces or coatings with small defects.

Another inexpensive tool based on synthetic fibers is a roller with a coat of polyester. The product quickly fails, but it costs cheaply, so it is recommended to buy it for one-time work.

Vallekov size

There are types of rollers for painting surfaces that differ in dimensions. In this case, only the dimensions of the cylinder itself are taken into account, and the handle may be any. For this feature, the tools are:

• Mini. In this case, we are talking about a cylinder with a diameter of no more than 9 cm and a maximum of 15 cm. Most often, the product is used to finish hard-to-reach surfaces or coatings with a small area.
• Midi. The diameter remains the same - 9 cm, and the height is slightly more - up to 20 cm. Such tools are considered universal and recommended for finishing at home. With their help, you can quickly paint the walls in the fact that the rollers themselves weigh a little.
• Maxi. How it is clear from the name, such products are distinguished by large dimensions. Their length reaches 30 cm, and the diameter is 8 cm. This type of roller refers to a professional tool, so the cost is appropriate. Most often, the product is used for facade works.

Some masters immediately buy a maxi size roller to speed up the indoor finish, but this is not the best solution. The fact is that such a tool absorbs a significant amount of paint, so it becomes very difficult. At the same time, the area of \u200b\u200bthe inner walls is not enough, which is to transfer all the absorbable paint to the surface, and the tool will remain heavy throughout the work. It is better not to hurry, but to paint all the Midi and mini rollers.

For staining outside, on the contrary, it is not recommended to use the first two options. The fact is that their diameters are greater than that of Maxi, so the paint is better sprayed, because of which it is impossible to work quickly. Outside the paint dries very quickly, so the speed of its application is very important.

On this basis, the tools are divided into the following groups:

1. For internal work. Present small light products.
2. Facade. They have a large size and equipped with a bearing that stops the roller at too much speed.
3. Textual. Can be made of various materials: rubber, plastic, metal, fur, and so on. With it, it creates relief drawings when using decorative plasters.
4. Clamps. These are rubber products, with the help of which glue compositions are applied to the surface and remove air bubbles from under wallpaper.
5. Needle. Used for perforation of drywall and remove old wallpaper.
6. Pilencated. Used for decorative painting without the use of the stencil. To date, such a tool is almost impossible.

Features of the choice of roller for walls and ceiling

Now about what roller is better to paint the walls. It is better to choose medium rollers, with a large handle handle. The length of the pile and the fur coat material depend only on the type of paint used, but as such does not play. If you need high quality coverage, it is recommended to purchase a roller with a coat from velor. If ordinary cosmetic repairs are planned, and the tool is no longer useful, it is better to purchase a foam roller.

As for the staining of the ceiling, then in this case it is better to buy a product with a short and medium in size to handle. The length of the pile should be medium so that the roller can absorb the working material, but did not splash it. Additionally, it is necessary to purchase a special raner tray or prepare a sheet of material that does not absorb the coloring composition. The fact is that the paint can not roll over the surface of the ceiling, therefore, these products are needed.

Now the question of how to paint the wall or ceiling, will not arise. When selecting the tool, follow the recommendations above. Remember that excessive savings can lead to poor quality surfaces and need to redo work.

Painting is one of the simplest ways to update the ceiling surface. Such a simple, but very effective home repairs is available to almost everyone who knows how to keep the roller in the hands and the can with paint. However, sometimes there are multiple pitfalls for the obvious elementality of a process, and the final result directly depends on how you overcome this barrier. What roller paint the ceiling? A simple and difficult question simultaneously, the price to which is your satisfaction from the work done. We offer the most useful tips on choosing and some secrets of painting.

1. From which the choice depends
2. What rollers are there
3. Useful tips for choosing
4. Conclusion

From which the choice depends

"Do not think about the tools down" - Periprase by the order of the quotes of the quotation from a well-known song here, as if it is impossible. Most people who have settled repairs are very frivolously approaches the choice of the necessary toolkit. Especially when it comes to painting. Here, the whole philistine fantasy comes down to acquiring the first roller in the construction store.

Well still, if before buying a person he will hold him in his hands, checking on the convenience of grip. However, often and this moment is safely soluble in a hurry desire to procure everything necessary and start-up (finish) repairs.

• type of surfaces of the surface;
• the quality of the paint used;
• the nature of the prepared surface.

The perfect type of surface for uniform staining it with roller - plasterboard. It perfectly absorbs any kind of paint, stably keeping the selected color. True, in front of the immediate painting it will be worth it to walk throughout the ceiling surface of the primer based on acrylic, which will slightly reduce the inductance of the cardboard sheet. And in this article you can get acquainted in more detail with the peculiarities of the painting of the ceiling by water-level paint.

Most often, the ceilings are painted with water-emulsion or water-dispersion paint, which brilliantly retains the color, is not afraid of moisture and is generally absolute safe for humans.

Depending on the type of ingredients used, it can be acrylic, silicate, latex. The answer to the question of which roller is better to use for painting the ceiling, in each individual case will be directly dependent on the choice of paint type. Thus, water-dispersion paint is great for staining plastered surfaces, which means that the tool we will pick up, taking into account this fact.

In addition, the choice of roller also affects the overall quality of the prepared surface. How ready she is to staining? Are all cracks chosen? What are the gaps between sheets, if we are talking about Ceilings from GLC? What primer was used to finish the ceiling surface? All this is only a small part of the questions, knowledge of answers to which allows you to properly decide on the instrument in each individual case.

What rollers are there

Trying to decompose all the rollers presented on sale on the shelves - the more adventure. The fact is that a variety of criteria can act as a starting point for classification. Starting from the type of coat used and ending the size of the drum. All this ultimately affects not only the speed of performance, but also on the convenience of it. Let's try to systematize the accumulated experience and consistently go through each of them.

Handle size

As a rule, in the rollers of domestic production, this indicator fluctuates within 30-50 centimeters . Experts note that these sizes allow you to confidently keep the roller in your hands and exercise a uniform painting. If the task is to paint individual elements, and not the ceiling as a whole, then you can choose a roller and with a smaller handle - 15 centimeters . As a rule, the manufacturer of such products are foreign companies.

An excellent option is a tool with replaceable handles, one of which is short, and the other is the opposite, long. Such a roller can be successfully used to perform a number of completely different tasks.

Baraban size

Standard drum size in modern rollers - from 20 to 40 centimeters . Of course, you can always find options both less and more, but universal such tools will not be called in any way, since they are not too comfortable for general painting and are more suitable for use in solving a local task associated with the coloring of visible decorative ceiling surface elements. .

Baraban design

The drum can be attached on the body of the roller both on the one hand and on the other. For all items, the first option is preferable, since it allows you to change the drum coat over time, making a tool suitable for solving other tasks.

Double-sided design, alas, significantly limits your "user interface" and change the fur coat you can not.

Type of fur coat

Probably one of the most important indicators that should be taken into account by defining with the tool.

• fur;
• foam;
• polyacryl;
• polyamide.

The advantage of the fur coat is in paint saving and its uniform distribution over the entire surface. Natural fibers used for the manufacture of such fur coats have reference absorbability, but easily pressed during painting. Of course, the final ease of use is correlated by the length of the pile.

A longer pile allows you to absorb more paint and apply a much thicker and solid layer. It uses durable and thick thread. In rollers with a short either medium pile thread, much thinner, and the surface of the ceiling after roller processing will be covered with a thin and uniform paint layer.

And now relate the received information with what you want to see the ceiling surface in the end - and accept the right decision.

The foam rollers are best used when you pursue the goal to create some kind of texture, relief on the ceiling. They are perfectly "friends" with oil paint having the most dense high-quality structure.

As for polyacryl and polyamide rollers for painting, the main sphere of their use is decorative work. To emphasize some kinda item on the ceiling, refresh the color mood, diversify the fragment - it is such a roller and should be used to paint the ceiling if your goal lies in this plane.

Current prices for ceiling rollers

The most popular rollers for painting ceilings and their cost is reflected in our table.

Name	Price per pc.
Creek from artificial fur assembly with handle 250mm Sibrth 80114	93 rubles
Roller from natural fur 200mm Sibrth 80128	53 rubles
Foam roller with structural handle, Matrix Master, 80221	288 rubles
Polyacryl roller Fit mini 02693	102 ruble
Roller with plastic handle, 250 mm, pile 18 mm, D 40 mm, Matrix 80887	128 rubles
Roller Anza Platinum Antex 250/38 mm 580025	379 rubles

1. avoid using rollers with a plastic handle - as a rule, it does not differ in particular strength and does not withstand increased pressure;
2. sophisticated embossed patterns can be issued by velor roller - for this you need to perform intermittent and sharp movements during painting;
3. also, for decorative design, the ceiling surface can be used by special rollers with already finished patterns on the surface of the drum;
4. making a purchase of a roller in the store, buy several replaceable elements immediately - this will allow you to save time later, when the roller comes into disrepair and you will rapidly pick a handle or a fur coat under the undeformed parts;
5. ceiling painting rollers are often equipped with a special capacity, which is fixed on the tool axis - it is where all the surplus paint flocks, which makes it possible to make the process of painting as convenient and indispensable.

masterpotolok.com.

Design of painting roller

There are paint rollers with different buildings. In total, there are three main types of forms:

1. The simplest and cheap rod pen. You can put a ready roller on it.
2. Rod handle with side holders that serve to be able to replace the roller fur coat.
3. Frame handle equipped with a special shock absorbing holder.

What are the types of rollers for painting surfaces

At home, you can use different rollers. First of all, they can serve for walls, gender and ceiling. For purpose and form, the following painting rollers are noted:

• foam;
• polyacryl (velor);
• fur;
• polyamide from twisted threads;
• textured;
• wallpaper rollers;
• framework;
• facade.

To understand all their differences, you should familiarize yourself with each type separately.

Foam rollers

These inexpensive rollers from synthetic polyurethane serve not long and are not suitable for active formulations. In particular, they are used for primer and painting surfaces with dispersion paints. But they are easy to operate and affordable. You can wash them and quickly dry. The fur coats are easily changed, so this option is quite practical and helps to save money. Thanks to the foam rollers, paint is applied evenly and neatly. It can be easily painted on the sides and in hard-to-reach places if the roller dimensions allow.

Polyacryl (velor) rollers

This type is ideal for paints and varnishes, water-level and oil paints. Despite the light face texture on the surface there are no villus from roller. The paint is applied neatly and smoothly due to the velor roller. It can be used for ceiling, walls and other smooth surfaces.

Fur rollers

They are made of genuine sheepskin or polyester-based artificial fur. The roller has a rigid darous surface, so it is perfectly used for enamels and oil paints. The length of the pile should be chosen depending on the type of surface. If the wall is not smooth, but rather porous or rough, then you should pay attention to the roller with a long pile. They can paint the walls, gender and other surfaces.

Polyamide rollers

There are different pile rollers, and polyamide are among this category. It is for them the longest pile, so they are suitable for painting such rough surfaces like putty, drywall and the like. They are relevant for enamel paints with a water basis.

Textured rollers

If you do not like a smooth surface, but I don't want to use wallpaper, then you should pay attention to the embossed rollers for decorative plaster, wet putty and the like. They have a design similar to all ordinary rollers, but they do not have a soft fur coat, but only a rubber base with any pattern. There are many different options that you can choose to your liking and preferences.

Valleys for wallpaper

This type of rollers is used to stick wallpaper. During sticking wallpaper, air can delay air, as a result, it is necessary to remove it from there. For this, a special roller with a fairly rigid surface is wonderful. Wallpaper smoothing with him will not take a long time. After using it, it can be easily flushed and dried quickly.

Frame rollers

These rollers are called frame, because they are made not as everyone else. They do not just dress the finished coat. There is a fully prepared framework on which a soft coating is attached. When using them, the roller is absorbed less paint. Their cost is low, but at the same time they are good to use.

Facade rollers

They are distinguished by a long pile and the presence of a special intermediate packing, which slows the rotation speed of the roller. This contributes to better staining and absence of splashes during painting.

What to pay attention to, choosing a malarious roller

Come to the store, it is difficult to analyze the quality of the roller solely by its appearance. Not all sellers have personal experience in the use of painting rollers, so they can only advise on producers, price and similar characteristics. The malarious roller should be chosen correctly in order for them to use it conveniently, and the result obtained fully satisfied the expectations.

Here are some tips to help you choose the perfect roller for painting:

1. When painting the ceiling should be chosen not a hard tool, so that the hands were not tired for the first few minutes. Ideally, rollers are suitable for the ceiling, so that you can paint standing on the floor, but they weigh a lot and rather suitable for professional painters.
2. For wall weight, the tool is also essential. Take, for example, fur roller. After soaking paint, it becomes even harder, and it is very difficult to use it for a long time without good physical training.
3. The colors of the fur coat can also be different. It is much more convenient to work with a white coat or any other. Rollers with a dark pile have the ability to lift with time, and a long pile of poor-quality rollers can stay on the wall with paint.
4. Pay attention to the fur coat there are no seams, because it will deliver discomfort during painting. Traces remain from such rollers on the surface. Of course, they can be removed, but for this you have to apply another layer of paint, and maybe not one.
5. Do not be flawed to try each handle for strength. You can press on the roller, in order to understand how hard it is, whether it bends during use. Also, the handle itself should be comfortable, for this you need to hold it in your hand.

The most important thing when using the painting roller - so that the process of painting was simple, and the surface was well painted even after the first layer. At the same time, I want the value of the tool to be low. A huge selection of options in building stores quite fulfills all customer requirements, so feel free to go on finding your roller, armed with our advice.

www.domechti.ru.

What roller paint walls

Before proceeding with the choice of painting roller for painting walls, you should decide on the type of paint. It depends in many ways the type of roller itself. For example, with water-based paints you can work poropolone roller. It is also suitable for applying various water-glue compositions (primer, sticking wallpaper). Not recommended such a roller to apply emulsion paints. Foam rollers are the most inexpensive of all existing. Their main disadvantage can be considered a briefness. In addition, there are many splashes from them if you work energetically.

What roller is better? We make a choice

To work with various types of paints, including those that have an organic basis, rollers are well suited with fur, velor, threaded surfaces. These materials absorb a relatively small amount of paint, it is more uniformly applied to the painted surface, do not spray and do not create divorces (heights).

When painting the walls it is important that the paint layer is uniform. They coped with this well fur rollers. In addition, they perfectly blame various wall surface defects (small irregularities, cracks, deepening, chips). The minus of fur rollers can be considered their property to climb, leaving "hairs" on the surface in the surface. This is mainly related to cheap instruments.

What roller paint walls and ceiling? Fur tested time

Vellar rollers They have characteristics similar to fur. But they create an even more uniform paint layer. After their application, the painted surface looks completely smooth. This type of roller is used for responsible works on painting walls. It is said that this is a roller for real professionals. If a velor roller enjoys a newcomer, any marriage is noticeable on the walls. By the way, this tool is optimal for applying varnishes.

Velor roller

In the case when quality is not so important as the speed of work (for example, if the surfaces have a very large area), it is convenient to use natural roller. When working with it, it should be remembered that too much the speed of rotation of the cylinder can lead to splashing of paint. Therefore, it is better not to rush. The filament roller gives a painted wall a pleasant texture.

Thread roller for walls

We choose a roller for painting walls: pile length

There is a rule: The roughness of the walls of the walls, the longer there should be a "fur coat". The long-tested should be a roller, which is planned to paint a relief surface (for example, textured plaster or wallpaper with a simulation of such). Long pile is well crossed by various excavations, dirting, deepening. For smooth walls need a short pile roller! This is important: if you use a long-zero roller on a smooth surface, fewer, divorces and non-uniformity of color may occur.

What roller paint the ceiling

Roller for ceilings need to be selected according to the same criteria as for walls. Typically, the cake roller, unlike the tool for staining walls, has a relatively short or medium size knob. Ceiling painting requirements are usually higher, so the roller needs to choose carefully. Most often for painting ceilings, rollers are used with a slightly elongated soft pile. It is very good if such a pile is from natural materials, for example, from wool. Too short pile is gaining insufficient paint. You can use the foam roller for the ceiling, but this is not the best choice: it forms "bubbles".

The paint applied to the roller cannot be rolled directly on the ceiling, as this will lead to the non-uniformity of the layer. Previously, it must be rolled on a sheet specifically prepared for this, organic or other similar material. It can be a special lalar tray if the roller size is small.

www.domfront.ru.

Paint roller: types

In the modern market there are painting rollers suitable for different types of repair work and paintwork products. To properly choose a roller for staining precisely with water-level paint, it is better to first pay attention to the material from which the product is made.

To cover the surface of the water-level paint, we need a roller consisting of the following materials:

• pile;
• velours;
• porolon.

Rollers from different materials are within the same price category, so in an inexperienced buyer choose quite difficult. Feel free to ask sellers and consultants, what roller is better and what features of operation are characteristic of each of them. The material from which the roller is made is directly affecting what the end result will be painted.

The final result of painting depends on the material from which the roller is made

From foam rubber

The main advantage of the use of foam rollers for applying water-resistant paint is the low cost, as well as the ability to purchase them in any, even the smallest, repair shop. One roller can be made from several types of foam rubber.

Pay attention to the percentage ratio of the high density foam rubber, it is it that provides a resistance to mechanical effects.

However, the products from the foam rubber have their drawbacks:

• the roller absorbs greater than necessary, the amount of paint, which is unprofitable in terms of the rational consumption of materials;
• due to the excessive impregnation of the foam rubber, a large number of bubbles can be formed during operation on the surface and the coating will be uneven.

The main advantage of the foam rollers is their low cost

From Velory

Select such a roller is suitable for staining with smooth, smooth surface. Velur - synthetic material and items from it are much cheaper than, for example, rollers from mohair. Also, the undoubted advantage of velor rollers is resistance to aggressive effects of solvents.

However, the inconvenience in the use of this type of product is that the velor does not absorb the water-emulsion paint. In order to achieve an even, one-photographic coating, it will have to dip a tool into the staining solution too often, which provides many inconvenience to the Malar.

Darous

Best of all, rollers from a pile are suitable for staining with water-emulsion paint. In order to determine which length of the pile should choose, it is necessary to clearly know the characteristics of the surface in the surface. For hard surfaces it is better to stay on the purchase of long-pile products.

If you are poorly dealt in the subtleties of painting, then the win-win version will be the purchase of a product from the average length of the pile.

The material directly affects the cost. Rollers from natural fur or felt will cost more than artificial substitutes. The quality of the fur coat determines how painting will be the result, therefore it should not save.

Pile rollers - the perfect option for staining with water-level paint

Advantages of pile rollers:

• the ability to absorb paint absorption using different lengths of the pile: by choosing a long pile roller, you will immediately be able to cover the surface with a water-level paint with a thick layer, and in order for the layer to be thin, you can purchase a short pile product;
• implementation of decorative painting works: For such purposes, rollers with a short pile are best suited;
• natural coat material provides long-term operation;
• roller with a long pile is irreplaceable to ensure a uniform coating of rough and porous surfaces.

Other selection criteria

Deciding with the view and material of the fur coat, should not be at rushing at the box office. The quality of paintwork works also affects what the size of the paint rollers will be. If you expect a fairly significant amount of work and there are several types of surfaces, it is unlikely to satisfy you one roller of a certain size.

Even before buying you need to check:

1. Quality of seams on the fur coat. From the accuracy and smoothness of the seam depends on how the uniform layer will be distributed in the surface on the surface. Rough seams indicate low quality product and will leave traces on the painted surface.
2. For naval products, it is advisable to carry out such a check: squeeze the pile of your fingers and pull on yourself. If the material is high quality, then the villi will not fall out. If after checking you noticed that the pile is easy to pull out, then it is better to choose another product.

1. For convenience, a handle has a huge value. It should be comfortable, easy to shrink and not slide in your hand. For painting walls or ceiling, it is desirable that the handle can lengthen.
2. Some manufacturers offer a set of replaceable fur coat. It is very convenient for practical use. If the tool was damaged in the process of paintwork, its fur coat can be replaced immediately. The cost of the product is much higher than that of goods with glued coats, but the handle is not required when wear.
3. There are also rollers with limiters and regulators. The presence and quality of the auxiliary parts affects the price category of the product.

When choosing a size, it is better to be guided by the principle of conformity - the more the surface, the greater the tool and vice versa. Consider the fact that when impregnating the paint roller will become much harder. It is important to understand to ensure the convenience of upcoming work.

kraska.Guru.

Comfortable design

The roller device is sufficient: it consists of a light metal or plastic cylinder, which is put on a special coating (the so-called fur coat). A handle is attached to the cylinder, which can be of different lengths. This simple and time-tested design allows the roller to remain the most popular painting tool for applying paints of any type on the most different surfaces (except for figured). The tool is used to work with oil, reservoir, acrylic, acrylate and latex paints.

The universality of the instrument is also in the fact that with it can be applied glue, antiseptic, primer and other liquid mortars.

What is more convenient - roller or brush?

A paint brush has its advantages in repair work and remains an indispensable tool when painting a variety of surfaces. Using the brush allows us to paint the most hard-to-reach places, covering elements of any shape.

However, when it comes to the ceiling, which is a flat plane, the use of the brush is not appropriate: the roller provides a smoother coating, speeds up work, makes it simpler and more efficient. The performer is less tired and in general performs work on the color of the ceiling much faster.

A brush can only come in handy if the ceiling is a curly design and it is necessary to high quality corners and hard-to-reach places.

What should be paid attention to when buying a roller?

There are several parameters to pay special attention when buying a roller; This refers to:

• vault length;
• fur coat material;
• cylinder diameter;
• rolling width;
• pen length.

The type of coating and the length of the pile (if we are talking about darous materials) are especially important when choosing a roller.

What material is better?

If you paint the ceiling with waterproof paint (which is observed most often due to the suitable characteristics of this type of building material), it is preferable to choose a roller with a long pile. Such a tool has good absorbent properties and can provide a smooth surface and a dense proscure. A short pile absorbs less solution, as a result, it turns out this is not such a dense layer, which makes the performer more often to dip a paint roller.

However, with all the advantages of a long pile roller, such a tool does not give a perfectly smooth surface, so it is worth using it for the lower layers. The final layer is better to perform a new roller with a medium pile length.

Poropolone and velor rollers have their shortcomings when painting the ceiling: the foam rubbing absorbs a small amount of paint, it makes it uncomfortable. Velor can leave air bubbles.

Table number 1. Types of rollers in accordance with the type of coating material.

Type of roller coating material	Dignity	disadvantages
Sheepskin	Natural wool is suitable for any surface and any type of paint. Allows you to get smooth coating, it makes a fairly thick layer (you will need to apply two layers of paint).	High price. Big weight of the product (hand tired faster). Loss of Village.
Nylon plush	Lightweight tool. Gives high-quality, smooth coating. Lower cost compared to sheepskin roller.	Divorces may remain. Requires certain skills when used.
Porolon	Allows saving paint. Suitable for many paint options (water-olive, oil, acrylic). Easy by weight (hand does not get tired). Great for oil paint.	It does not always give a perfectly smooth surface, there are often divorces. Provides the application of too thin layer of paint. Requires experience. Briefly. Not suitable for paint based on synthetic resins.
"Golden thread" (pile, strengthened with metal thread)	Durable. Resistant to paint. Not deformed when working.	High price.
Decorative skar	It gives a beautiful pattern, the unique surface of the ceiling. Used for final coating.	The roller is designed exclusively for creating a decorative surface. Has a high cost.

Valik size

The ceiling area can be very significant, so the use of a small diameter roller and a minor cylinder width may be inappropriate. Therefore, it is usually recommended to purchase a large roller size. There is one "but" here: such a paint tool may be heavy. Consider work for a long time, holding a weight roller. And after absorbing paint becomes even harder. Therefore, we recommend preferred to the average roller (up to 30 cm in width), which is more convenient to use, since it is easier to keep on weight.

Another point is the form of the ceiling. It can be figured, multistage. Such a form is difficult to cry with the help of a large roller - you will need a medium-sized tool. Perhaps arsenal will have to add small rollers and painting brushes of different sizes.

Modern manufacturers offer the most advanced roller designs: you can find in the construction goods of rollers with a special telescopic handle (advanced), as well as tools designed specifically for painting the ceiling and having a special bodied (tray) to flow out paint surplus.

Also, in order to save savings, manufacturers offer customers replaceable elements to roller handles. This is a reasonable choice, because the roller handle serves much longer than the skin itself, and buying replaceable skins, we save on a metal-based tool.

Video - Choosing a painting roller: species, sizes, features

How to choose a high-quality tool?

In order not to make a mistake with the quality of the tool, test the roller right in the store. So you can protect yourself from acquiring poor-quality things. Of course, the price is already talking about many. A more expensive roller will serve longer, will provide a more smooth painting, whereas an inexpensive tool may be short-lived and will require more time and effort to create an attractive ceiling coating.

The necessary actions are shown below.

Step 1. Try to check how strong the tool you choose. Squeeze the roller himself: will he deform? If so, it is better to pay attention to another model.

Step 2. Look how efficiently the roller is made. If seam is allocated on the coat, then such and the tool will not be able to provide high-quality coating on the surface of the ceiling (traces may remain).

Step 3. If you choose a roller with a long pile, try to just twist it for the pile and understand how much the material itself is strong. Is there no vain in your hand? If yes, this is a reason for doubt. Perhaps you should pay attention to a more expensive option.

Instructions for coloring the ceiling with roller

The process of staining the ceiling with a roller does not constitute anything difficult, you only need to use high-quality materials and act in accordance with the instructions.

Table number 2. How to paint the ceiling with a roller.

Steps, illustration	Description of action
	Prepare a surface. Remove the layers of old paint. You may need to wash the ceiling with special means and wait for a complete burden. Also, if necessary, the ceiling is aligned (with a putty) and sealing cracks.
	Remove plates of mold (if any). Process surface with special antiseptic agents. Wait for graze.
	Apply a primer. This stage will improve the quality of the surface and extend its life.
	Prepare paint (dilute it or simply mix depending on the manufacturer's recommendations - look for them on the package). Mixing is best carried out with a drill equipped with a special mixer nozzle.
	Prepare tray for rolling paint roll (or fragment of old wallpaper, linoleum, boxes).
	To dip the roller in the paint. It is recommended to completely lower the roller in the paint, so that the entire working surface of the instrument is commercially.
	Roll out the roller on the tray (or piece of wallpaper). It is not recommended to roll it on the ceiling, since this can lead to the appearance of spots and uneven painting.
	Paint the ceiling site. In order not to be noticeable irregularities and joints on the borders of the plots, it is necessary to paint the ceiling in one right.
	It is recommended to perform smooth movements when painted, it is not necessary to rush and act too sharply, as it will have an impact on the quality of painting - the layer may look in an inhomogeneous. In order to achieve surface homogeneity, it is required to perform a minimum of recovered movements.
	It is not recommended to take breaks. You can not sneak the drying layer, it is better to perform another full painting.
	If there are influx, it is recommended to remove them with a dry sponge. Wait for complete drying. Apply paint another layer.
	Painting the ceiling is carried out in two layers (this is minimum, 3-4 layers are recommended). To transition to the next layer, it is necessary to wait until the bottom layer is completely dry. It is recommended to install a heater in the room to accelerate the process.
	The direction of painting the second and subsequent layers should be perpendicular to the underlying layer.
	For painting corners, as well as decorative items you will need a brush.

The final layer is necessarily applied in the direction from the window.

Detailed instructions for painting the ceiling roller you will find in this article! We also advise you to read about what roller paint the ceiling with water-level paint.

potolok-exp.ru.

Types of rollers

When it comes to a painting roller, first of all refers to the nozzle-roller and the material from which its fur coat is made, because it is the composition and the structure of the absorbent material affects the final result and quality of paint and varnish coatings. So at the end of the work not to be disappointed from the remaining divorces, non-crushed sites, splashes or bubbles, it is worth understanding the intricacies of the tool selection.

Working surface roller - fur coat

The working surface of the roller, referred to as the fur coat, is attached to the cylindrical framework and is made from different materials. When the tool is dipped into the tank with the paint, the substance absorbs and transfers it to the surface being processed. Depending on the type of work and coloring materials, rollers with different kraes studies are chosen and, accordingly, by different coat:

Rolls with foam fur coat suitable for water-based paints and water-glue compositionsused for the primer and shook wallpaper. The foam rollers are cheaper than the rest, but it is necessary to change them more often - the fur coat is quickly wearing. The porolon is afraid of paintwork materials, which includes acetone. When exposed to the destructive components, the foam rubber swells, deformed and practically dissolves. In addition, the foam roller creates a spray at rapid operation and leaves small air bubbles on the painted surface.

Fur Valik

Fur coat quality paints irregularities, recesses and cracks, providing uniform applying paint to the surface. The working surface of the fur absorbs the sufficient amount of paint, does not create inclusions, divorces and splashes. Fur is used mainly synthetic, less often - natural sheepskin. The main minus of rollers with a fur coat is the caring porcelies that remain on the painted surface.

Velor roller

Velur is a fabric basis with a pile imitating a plush. It does not roll, does not splash the paint and ensures uniform applying the coloring or adhesive composition. The wall painted with such a roller will look absolutely smooth. Velours great for applying oil, alkyd, water-dispersive paints and varnishes And not afraid of solvents. But this tool will not suit a newcomer in a construction business, because the slightest marriage will be noticeable.

Veliki rollers apply mostly professional painters for finishing works. In addition, due to the small length of the Velor's pile absorbs a small amount of paint, so the tool has often dipped into it.

Nietary roller

The coat of the filament roller is made of a large amount of threads fixed on woven base. Such a roller it is convenient when painting large areas and is suitable for any kind of paints and varnishes.. It is convenient and durable, provided if it is well ringed after each use. The filament coat leaves a pleasant texture on the painted surface, but when working, such a tool should not be hurry - the rapid rotation of the nozzle contributes to splashing paint.

Tip: Whatever the roller you choose, be sure to check the quality of the fixators and the fur coat - it should be a whole, carefully fixed on the basis. The roller is considered poorly, when the pile climbs or sticks the threads of different lengths.

Method of fastening the fur coat

The working surface is attached to a cylindrical roller in three ways, depending on which the rollers are divided into glued, thermoelectricand with a fur coat.

IN glued rollers The fur coat is a narrow strip, wound and glued at the corner on the cylindrical roller. The fur coat forms a kind of spiral, the edges of which are connected by the "butt into the joint". The glued rollers evenly paint the walls due to the lack of seams. But they have a disadvantage - short-life. During operation, the paint destroys the glue and the fur coat "falls off" from the base.

The most progressive technology is applied to manufacture thermoclane roliks. In this case, the fur coat is soldered into the plastic base, the tool's wear resistance increases.

Rollers with a fur coat The cylinder is based on the coat having the shape of the sleeve. In most models from the sides of the cylinder, the work surface is clamped with end plugs, and only foam coats of small sizes are kept based on the force of elasticity.

Thanks to the removable end plug, the fur coat can be replaced with a new one if necessary. Removable fur coats are longer than glued, but have their drawback. For their manufacture, the material is stitched, and when applying the coloring composition on a wall or seam ceiling can prevent uniform paint distribution.

Tip: By purchasing changeable nozzles for rollers, buy several pieces at once. It will be a shame to stop painting, if the fur coat suddenly will dug or break the end clamps of the roller.

Vallekov dimensions

The choice of roller affects the size of the surface being treated - for larger areas, the tool is chosen tool for greater length and diameter. Depending on the size, painting rollers can be divided into three groups:

Universal (Standard)

The length of universal rollers is 140-250 mm. Professionals consider a 180 mm molding nozzle with the optimal option, so the tools with standard sizes are used for painting work most often.

Facade

Facade rollers usually have a large diameter and a length of 180 to 270 mm. When impregnating wood, the painting of the foundation or floor covering of a large area does not require high quality finishes, therefore it is more expedient to use the rollers of increased size.

Little rollers

Length of small rollers fluctuates from 50 to 150 mm. They are convenient to paint the corners, narrow surfaces and hard-to-reach places.

Valik's pile length

Replaceable rollers are released with a pile length from 4 to 25 mm. The selection of the length of the pile depends on the quality of the surface being processed - the larger on the wall of irregularities, the greater the length of the pile must be applied. For smooth walls, short-circuits are used (4-9 mm), which will evenly distribute the paint along the prepared wall. If for a smooth surface to use a long pile roller, excess paint will form incomplete and divorces.

For relief wallpapers, textured plaster and coarse surfaces, rollers with a length of a pile of 12-25 mm are used. Due to the sufficient length of the pile, the paint penetrates all the depressions, deepening and protrusions on the wall. A short pile with such a task will not cope and leave non-crushed plots.

Construction of rollers

Depending on the type of roller fastening to the handle, the design of the tool is burealed or frame. Consider each of them.

Burel roller

Burel fastening system is popular and loved due to its versatility and simplicity. The bureel tool consists of a handle with a holder in the form of a metal rod, called a burealed, and a roller equipped with a device for fixing and rotation. Build the Burel roller comes easily and quickly - the roller is satisfied with the BEBEL, and the tool is ready for operation.

The global system allows you to use the same pen and change the tips on the type of work and paints and varnishes. At the same time, there are no problems with the selection of the diameter of the inner opening: the bureau for rollers of standard sizes has a diameter of 8 mm, and for small-sized - 6 mm.

Frame roller

The frame roller consists of a paper knob and a roller in the form of a hollow cylinder frame, on which the fur coat is fixed. Such a system fixes the frame on the metal rod using plastic bearings, non-consolidated in the regional. In building materials stores you can buy a frame roller, whose fur coat is hoping for a plastic or wire "skeleton". Such rollers are convenient to cross the structural surfaces - the paint penetrates in the depressions, cracks and notches.

Frame rollers do not enjoy so popular as glukel. The leader in the production of rollers on the frames is the Swedish firm "ANZA". The tools manufactured by it are high-quality, but expensive, therefore, not every professional will spend on the branded roller, which is already talking about ordinary ordinary people. Chinese "clones" albeit in price, but come into disrepair after 2-3 hours of work.

Pen rolling

The handles are made of plastic and give them an ergonomic shape so that the master is easier to work for a long time. The instrument handles are two-component - from plastic and elastomer, which has anti-slip properties. Due to the shape of the handle, the paint does not fall into the hands of the malaria during the runoff. Roller handles are easy to store in suspended due to the holes that they are equipped.

The handles are of different sizes, but the most convenient for standard work is the length of 25 cm.

Such length is recommended when painting the ceiling in case of work is made from a stepladder or building goat. The universal shape of the handle allows you to use telescopic rods capable of increasing the length of the handle by 0.8-4.0 m. With the help of such extension, you can paint the ceiling or walls of any height right from the floor.

In addition, the same handle is used repeatedly, and if the replaceable rollers wear out, it is enough to buy new and fasten them on the holder.

Rolls for decorative painting

The peak of its popularity in our country of our country, rollers for decorative painting survived in the 70s of the last century, when, due to the lack of wallpaper, the inhabitants tried to make at least some kind of diversity in a boring interior of monochromically painted or brown rooms. Now the tasks and quality of materials have changed, but the drawing technology has remained the same.

A modern paint roller with all its apparent simplicity is a designer tool and is widely used for decoration - patterned rollers equally convenient to apply a pattern on the walls and ceiling, furniture and wallpaper under painting, fabric, and even paper. With the help of such tools on the surface in the surface, you can create any drawing, be it abstraction, imitation of stone or wood, geometric or floral pattern. Rollers for decorative painting depending on the material of the roller are rubber or foam.

On the surface of rubber textured rollers there is a convex pattern, which remains on the surface of the surface. Fact roller consists of two rollers - patterned and feed, adjacent to each other and fixed on one handle. The feed roller can be fur, foam or velor, its task is to absorb paint and give it to the patterned one. Fact rubber roller can be selected with any ornament and replace if necessary.

Textured rubber rollers are an order of magnitude more expensive than usual, but by purchasing a tool once, they can be used for quite a long time. For long-term use, a patterned roller is enough each time after performing work thoroughly rinse it.

Textured rollers with foam coat are capable of creating a geometric ornament or a drawing that simulates the structure of natural materials. The foam rollers are short-lived, but also the price of them is small. The property of the painting roller is difficult to overestimate: this simple and universal tool helps reduce the flow of coloring materials, covering the surface with a thin uniform layer; reduces the duration of time for finishing work; Provides high quality coating compared to tassels and macloves.

Rollers - an indispensable thing when painting surfaces. They have different sizes and types, each of them is intended for a specific work. A variety of options in the store makes it possible to purchase the most appropriate tool.

Malyary roller: how to choose a tool for the embodiment of the designer idea

It is impossible to introduce repairs without a painting roller, if it comes to staining the walls. Thanks to the variety of products in the store, choose such a tool easier. Meeting the needs of the buyer, the roller for applying a smooth layer of paint or creating a ribbed surface is considered an indispensable assistant.

Indispensable Assistant in Painting Walls - Roller: Purpose

During the repair, or a smooth layer of paint on the overall area is applied. This invaluable help can offer not so long invented the device - roller. With it, it is sufficient to simply and quickly paint the surface, and this can be both a monophonic coating and a decorative stuffing patterns.

How to choose

The main part of the device is a cylinder of different types:

1. 1. mini - having a diameter of 3-9 cm and a length of up to 15 cm. The tool with such a cylinder is used for staining surfaces with a small area;
   2. midi are practical medium-sized rollers. The diameter of the cylinder is 9 cm, and the length is up to 20 cm. This is a view for finishing the inner surface of the house;
   3. maxi - used for the exterior finish at home. The diameter of such cylinder is 8 cm, the length is 30 cm.

The size of the tool is chosen according to the surface area of \u200b\u200bthe surface. For minor work, mini is used, and for extensive - midi and maxi.

Sometimes it seems that the use of large rollers to finish the walls of the rooms is better because they are overall. But, during internal work, the base is becoming severe due to absorption, and the paint splashes or leaks. Another thing is at home: in the fresh air, the coating will dry faster, so the speed plays a decisive role. For such works, use tools with a cylinder of the maximum size.

How to determine the length of the pile

The quality of the work produced depends on the correctly selected pile of a pile of fur coat. Depending on the surface structure for staining, rollers with different pile length are used.

1. Up to 5 mm. - for staining smooth surfaces (mostly varnishing).
2. 5-10 mm. - for painting ceilings and spacious walls.
3. 5-20 mm. It is mainly used for staining of the concrete surface, not polished wood or stucco with roughness.
4. 20-30 mm. Cubes with a large pile length paint brick, concrete surfaces, walls with embossed plaster, strong porosity and roughness.

Smooth, do not require special efforts to color, a short pile will be quite enough. Another thing is a surface with many irregularities and roughness, for their finishing it is advisable to choose a roller with a long pile. A variety of combinations of options for these components makes it possible to choose a suitable tool for its use in painting.

Parts of the roller

The tool has two components: the machine and the main working surface of the cylinder is a fur coat. The machine consists of handle and bohels.

Variety of handles

The handle has a convenient shape, it happens from wood or plastic. There are no special standards for handles. When choosing a tool, you need to take into account the size and weight combination: the handle should be comfortable to be covered with hand, and the fur coat does not outweigh the handle, otherwise it will work hard.

Fastening the nozzle

The cylinder has three types of fastening.

1. Hard mount. Such a tool cannot be disassembled, after wearing the fur coat, the roller comes into disrepair.
2. The presence of a coupling. If necessary, the fur coat is replaced with a new one.
3. Frame system. This species suggests the multiple use of the tool without the kernel.

Rollers with a specific mount design are selected based on the buyer's preferences.

Materials varieties

A variety of materials makes it possible to choose a suitable tool for a specific type of work. Forms a lot of fur coat:

• foam;
• fur;
• velory
• dense
• polyamide;
• polyacryl;
• polyester.

Each species has certain properties and, accordingly, the price.

Fur coat colors evenly, does not leave bubbles, it absorbs a small amount of paint, which is why there is almost no spray. The only minus - the separation of the fibers, which remain on the surface of the surface.

If there are many cracks that you need to pour paint, it is desirable to choose a tool with a longer pile. Roller with velor coat has the same qualities as fur, but does not leave VILLIN. The painted surface remains perfectly smooth.

Polyamide cleans perfectly after use. Due to the resistance to aggressive media, the fur coat does not deteriorate, easily absorbs and gives the paint of any type (even those in which there are water or synthetic solvents). Polyacryl is considered less qualitative analogue of polyamide, but colors is also good. However, if different types of paint are applied by a polyamide fur coat, then for polyacryl coats are recommended only on water based.

The easiest tool for staining, which can be found in building stores - foam. It is perfectly coping with smooth surfaces, but irregularities paint with difficulty. It has a low cost, because if it is bought only at a time, the option is quite suitable.

Roller with a filament coat work quite quickly. Thanks to its relief, he leaves beautiful patterns on the wall.

Separate for coloring: textured rollers

When I want to create an unusual texture on the wall surface, texture rollers use. For the granulation effect, a fur roller will be required and a special texture paint that unevenly falls on the surface. The drawing drawing is done using a special textured roller - screen.

What better to choose

The working tool must be selected in accordance with the expected result. Some kinds of textured rollers are convenient to create beautiful patterns, and others - to completely cry the wall with the effect of ribbies. Considate the aggressiveness of the paint used, picking up a fur coat from a suitable material.

Stencil with drawing

An interesting option for staining the surface of the room is screen rollers. Such coats are a cylinder on which the drawing appears.

The size of stencils from small (for staining small sections) to large (they are used to apply the drawing on). The lines are smoothly connected, so you can cut the whole wall without any problems so that there will not be noticeable joints.

Use does not require skills or great efforts. The main thing, adhere to some rules:

• conduct on the wall with a roller is not very pressing, the pace is slow;
• a new paint is gained when the former is completely over.

Wide with drawing

The main plus in wide screen rollers is fast staining of the area. A stencil roller is easy to docile with a pattern, applied earlier, which visually creates a sensation of a holistic pattern.

Relief roller for decorative painting

The embossed roller is painted with a certain patterned pattern. They are also used to decorate the surface by selling raw powders. This technique will allow the textured surface of the wall after drying it.

How to choose from the material used

Under the definite, the corresponding fur coat material is selected. The foam coat is used once, after which it becomes unsuitable. But to more expensive rollers, which are planned to be used in the future, you need to pick up paint in accordance with the stability of the fur coat.

How to paint water-emulsion paint

For staining with water-level paint on smooth surfaces, 3 types of rollers are used:

• foam;
• nietary;
• nappy.

The most commonly used is a native. The foam fur coat absorbs a large amount of paint, which is reflected on the quality of work. The filament coat absorbs her smaller, because of which the paint falls more smoothly. The selection of the desired pile length also matters: the smaller the surface, the shorter it is.

How to paint acrylic paint

Thanks to its special texture, acrylic paint is often used in painting works, but requires a suitable tool. The most suitable option is velor. Also suitable foam, provided it is good quality.

For facade, exterior works are recommended to use a roller with polyacryl coat. Polyester fur coats are also suitable for such work if the pile is up to 6 mm, although it is recommended a pile of 18 mm for the rough and uneven surface.

When choosing a roller in a construction store, pay attention to some features.

1. The roller must have a coat suitable for the selected paint type. It is worth ensuring that the material from which the roller coat is made, suitable and will not deteriorate after the first use.
2. You need to decide, after which it is necessary to choose the size of the roller.
3. If you need to act on the wall - you need to select it from the manifold of the premises of the drawings. When painting the walls are entirely offered rollers with different coatings.

What kind of roller choose - to the reasoning of the buyer. The conscious choice of the working tool simplifies the creation of the desired effect.

How to make a roller with your own hands

It is not necessary to buy a roller for painting works, because you can always do it yourself. First, it is not necessary to spend money, secondly - if it concerns the decorative roller, you can create an unusual, unique pattern on the wall.

Decorative

Decorative roller is easy to do at home from the remedies. For this house there must be an old unnecessary roller. To create decorative painting on the wall or ceiling, household items are used attached to the roller.

For example, a roller and a plastic bag will be required, they fasten them together with scotch. It is important that there are as many folds as possible, it is they will create a unique embossed pattern on the surface. Instead of a package, also use hair gums, a grid for vegetables, fabric trimming, and so on.

An interesting embodiment at home is a unique decorative roller using foil and acrylic putty. It will take a dense foil (such as from under the packages of dairy products) and the subject to be squeezed with the pattern.

With the help of the selected item on the foil, the liked Figure, geometric shapes, stars, chamomiles, birds, straight lines, cells, interlacing bending strips.

If the drawing should not have junctions, but to merge into a single picture. It is necessary to begin to measure the foil length, which will be overlooked around the roller, it is also necessary to take into account the layer of putty between the roller and the foil.

It is advisable to apply the line before squeezing, they must have a distance of at least 5 mm each other, then the drawing will not merge.

A layer is applied to the rear wall of the minted foil, and turns around the roller coat to give a cylindrical shape. The main thing is to make it quickly that the putty does not have time to frozen ahead of time. At the last stage, the foil is glued to the roller.

Factory

Production of factor roller does not require great effort. The old roller with a foam fur coat will give the texture of the ropes pasted on it. Watching them the cylinder many times, the roller will leave behind the complex pattern. You can also use the threads to allocate individual parts of the foam coat.

In the manufacture of homemade decorative roller, a stationery knife is often used. First, the desired pattern is applied to the foam coat with a marker, after which unnecessary parts are cut with a knife. The pattern may be the most diverse: cage, stripes, brick imitation, etc. So it turns out a homemade decorative roller.

With the help of a knife and copy paper, the same can be done with rubber coat. The pattern is made on the basis of the desired thickness of the picture texture.

Universal

Make a universal roller just. Initially, a cylinder is taken, for example, from under toilet paper, adhesive tape for removing a pile from clothes or tin beer. It is covered with a woolen cloth or a thin foam rubber, 1 cm thick, which will absorb paint. Fat rigid wire, curved by the letter "g", will become a bugle.

Splashes that will remain the ceiling, you can paint when processing walls. But, first should be prepared to prepare paint. The paint tray in which the paint is poured, helps adjust the amount of paint. The roller picks up the mixture into itself, and the surplus is extruded on the inclined wall, the splashing of paint is reduced to a minimum.

To date, the roller has become an indispensable tool in repair. Due to its species, you can make repairs as possible to expectations. The tool is easy to buy in a construction store, and the old spoiled roller can give a "second life" using certain methods.

Useful video