How staples can be inserted into the stapler
Before answering this question, let's take a quick look at the features of the tool and consumable. In particular, there are 3 types of staplers:
- mechanical (manual);
- pneumatic;
- electric - network and battery.
It should be noted that this is the main classification, but there are others here. For example, this instrument is divided into 2 groups - professional and household. In addition, depending on the purpose, there are stationery, construction and furniture. Each type is designed to perform specific tasks. For homework, a household tool is quite enough, because you will only use it from time to time. Accordingly, buying a professional stapler will only be an unjustified waste of money. There is nothing to say about stationery staplers - these are very simple devices, probably familiar to everyone.
At the same time, it should be emphasized that the principle of charging for all staplers is approximately the same. Of course, there are, of course, some differences here, but by and large they are insignificant. Let's look at the simplest example of how to properly insert staples into a small stapler (also called a clerical stapler). Today, such a device is probably in every family, so many are fine 
know how to prepare the tool for work.
The first step is to pull up the back or front of the top cover. A clip will open in front of you. Now you should push the spring back, until it stops, and then insert the plate with brackets. Then all that remains is to return the lid to its reverse position, making sure that there is a click. That's it - the stapler is ready to go. It remains only to check it on some unnecessary sheet of paper, shooting off one or two staples.
The furniture stapler is charged in approximately the same way. Only here, first of all, it is imperative to put the tool on the fuse. This precaution will not be superfluous if you are loading the staples into a large stapler, regardless of its type. The fuse is a good protection against accidental shooting, and therefore we do not recommend neglecting basic safety rules. Do not forget that the professional tool is powerful enough, and the staple may well fit tightly into soft tissues.
However, let's get back to the main question. So, putting the tool on the fuse, we need to get access to the clip for the staples. There may be different options here. In some models, you just need to pull the box towards you, in others - press a special button or release the latch. The instruction manual supplied with the instrument will tell you how to do this. However, if there is none, that's okay. Even a person who has never held such a model in his hands can figure out what's what. Everything is really very simple here. Having gained access to the clip, we put a plate with brackets there and return the box to its original position. In many models, a characteristic click will indicate the correctness of the action.
When inserting staples into an electric or pneumatic stapler, it is recommended to disconnect the tool from the mains or the compressor. For a cordless tool, simply put it on the fuse. However, for reliability, you can disconnect the battery. Well, the sequence of actions here will be the same. That is, we first get access to the box, then fill it with consumables, and then return the clip to its place. Of course, there are minor differences depending on the model. However, they can hardly be called critical.
Separately, I would like to note the filling of the printer or copier with staples. Here it will already be necessary to act somewhat differently. The main difference is that in this office equipment the entire cartridge with consumables is changed at once. Accordingly, first of all, you will need to buy a new one. When buying, be sure to check if this type is suitable for your printer or copier. After all, there may be different options. Next, we find the finisher and remove the empty cartridge from it. Where exactly this compartment is located, you can find out from the instruction manual or ask the corresponding request in the Internet search engine. Typically, you press the release tabs to remove the cartridge from the finisher. Now all that remains is to install a new cartridge.
And in conclusion, I would like to say a few words about staple staples. They are different - primarily in size. Staples are also distinguished by the material of manufacture. Therefore, before buying, it is better to consult with the seller about which consumables are suitable, for example, for furniture. After all, the wrong choice may well have a negative impact on the quality of work. In addition, many staplers do not work with small staples. Therefore, for each model, you need to select consumables taking into account the size of the latter.
The material from which the staples are made is also important. For example, aluminum are the cheapest, but they are not reliable. Therefore, such staples can be used only if no physical impact will then be exerted on the fixation site or for fastening thin materials. Copper brackets are quite expensive, as are stainless steel consumables. They are used only in a rather limited way - mass use is simply unprofitable. The most popular option is regular steel braces. This is probably the best ratio between price and quality. By the way, you can simply take one of the staples with you to the store, or the paper box itself - in this case, it will be simply impossible to make a mistake with the choice.
A stapler (translated from the English "stapler") is a necessary thing in everyday life and at work. The stationery stapler is prepared for stapling sheets and files. There are five types of stapler: manual, manual office, desktop horizontal or vertical, stitching, typographic. They all differ, before each in the number of sheets that can be sewn at a time.
You will need
- - stapler;
- - staples.
Instructions
1. Determine what type of stapler you have. To do this, see how many sheets you can stitch at one time. The most primitive devices are pocket staplers. They are prepared for stapling up to 10 sheets. Manual office ones have a special indentation on the fingers and allow you to staple up to 30 sheets. Desktop horizontal or vertical have a rubber or plastic sole, they can sew up to 50 sheets. In stitching, it is allowed to staple up to 150 sheets, and typographic ones, having a maximum stitching depth, bind up to 250 sheets at a time. The specificity of stapling with a stapler is through fastening, which you carry out with a metal staple. The staple pierces the sheets to be stapled through, and its ends abut against the plate located at the end of the other side of the stapler.
2. Before loading the stapler, determine the size of the staples that suits it. Staples (which are also called staples) are of several types: No. 10, 26/8, 26/6, 24/8, 24/6. These numbers are written on the packaging. Staples must be packed in cardboard boxes of 500, 1000 or 2000 pieces. Which of the above is right for your stapler, you will find out by looking at its packaging.
3. In order to load the stapler with the selected staples, bend its cover. It is connected by a spring to a plastic element, the one that presses the staples against the opposite edge of the metal groove, in the one that holds the staples. Opening the lid will pull the spring and, consequently, the plastic element, thus freeing up space for new staples.
4. Take one section of staples and place them in the metal groove with the ends facing down. Close the lid and click to sample with the stapler once. If a staple with concave ends fell out of it, then you did everything right, if this did not happen, or the staple was bent abnormally, then repeat the procedure, or change the stapler.
Using a stapler without any nails, you can fasten materials of small width and density. It is an indispensable tool in the office, construction and furniture industries. In this article, we will figure out how to insert staples into the stapler.
Stationery staplers
These tools are very simple and are designed for the average layman who is not versed in technical "troubles". Everything is simple here. You flip the top cover - and the spring with the pressure mechanism moves back. You insert a clip of paper clips with the points down and close the lid. The clamping mechanism returns to its place, and the tool is again ready for work.
Those interested can watch a video in which the boy shows how to do this correctly.
Construction staplers
They are more massive and have a slightly different structure, although the principle of operation is the same. The spring clamping mechanism pushes the clip to the impact mechanism, after each actuation, the next clip takes its starting position and, as a result of pressing the spring key, the impact mechanism drives it into the right place, thereby pressing the next sheet of cardboard against the wall with a paper clip, the material against the wood from which the frame is made upholstered furniture, or only for the formwork of the future concrete foundation. Let's figure out how to insert paper clips into a construction stapler.
Wrong option
The mistake of many is that when the stapler runs out of staples, they, pulling back the double-sided lugs of the frame lock, open it and try to insert the next clip of staples through the front part from the side of the striking mechanism. As a result, with an awkward movement, the spring mechanism now and then throws the clip back, and it flies away for many meters, after which it is necessary to search for it for a long time. Often the clip can fly into the eye of the hapless "stapler operator". Here is a video showing how not to do it, although the operator himself does not know about it.
Correct option
The correct way to insert staples into a construction or furniture variety stapler is to press on the back of the spring-loaded staple holder to release its slot from the lock hole and pull it out completely. After that, you can even insert more than one clip into the frame and return the spring of the mechanism to its place, thereby ensuring its uninterrupted operation for a long time. Here's a video on how to do it right.
The frame should be opened as in the first, incorrect, case, only when one of the paper clips gets stuck in the exit slot.
We hope our article was useful to you. Enjoy your "recharge"!
Nailing a film, lining or vapor barrier to cladding, chipboard or upholstery to furniture - a construction stapler will help to carry out all these tasks. This device is also called a stapler, staple gun, staple gun, nailer or tacker. In this article we will talk about there, what types of staplers are, how to choose them correctly, and also how to insert staples into a furniture stapler.
Types of staplers
First you need to decide what type of stapler you need. By the type of driving force, these devices are.
Mechanical
They are powered by hand power, have a low performance, a small number of staples that can be “tucked in” into it. When working with hard materials, this tool is quite complicated and requires considerable effort.
However, mechanical tackers are relatively small and lightweight, which makes it possible to work in awkward positions. In addition, many are attracted by their low price, although there are models with a fairly high price tag.
Electrical
In such tools, the bracket flies out after the trigger is pressed, but the mechanism is powered by electricity. There are models that run on batteries, there are - from the mains.
Of course, the performance of such staplers is much higher than that of mechanical staplers, but their prices are also much higher, especially for battery types. The dimensions are also larger.
Important! For models that operate on the network, the cord may interfere with work, and for battery types, a bulky handle and weight are inconvenient. But physical effort is minimized.
Pneumatic
Here the driving force is compressed air, under the influence of which nails or staples fly out of the store. Such devices have high productivity and a fairly large store - you can immediately fill a furniture stapler with a large amount of consumables.
However, the disadvantage of pneumatic models is that they work from a compressor that makes a very loud noise. It is very difficult to move with such a unit, so this type of tackers is more appropriate for professional use in a certain place.
Important! If you only need a construction stapler for one-time work - only for the time of building or finishing a house, then it is better to choose a mechanical or electrical model.
Household and professional
Like all other tools, construction tackers are conventionally divided into household and professional ones. At the same time, the difference in cost is significant - several times. And this is justified, because the matter is in the functionality, the number of operating modes, settings and in the working resource:
- In household models, a small working resource, since they are mainly made of plastic.
- Professional tools are made of steel, often stainless steel. They contain plastic elements, but, as a rule, these are metal grips to soften the recoil.
Important! There is also an intermediate class - semi-professional. They fall between these two categories in terms of quality and price. Often it is in this group that it is better to look for a tool for use at home. It does not work badly and is relatively inexpensive.
Staples for a stapler: types and selection
Each stapler works with a specific fixture. Therefore, besides the fact that you need to know how to refuel a furniture stapler, you also need to have an idea of what consumables can be used for this. When heading to the store for staples, you need to know the type, or at least the dimensions.
Taker staples are made of the following materials:
- Aluminum is a good choice for soft surfaces such as pine, but will not work for tougher surfaces as they will wrinkle.
- Copper is a rather expensive option, which is used in rooms with high humidity. Also used for soft surfaces.
- Steel is a budget option that can be used for harder surfaces. However, their disadvantage is that they rust.
- Stainless steel and zinc plated are excellent choices, but quite expensive. But the fasteners are reliable, for any conditions.
Important! In addition to the dimensions (back width and leg length) and material, it is also necessary to pay attention to whether there is a sharpening or not. For softer surfaces this is not so important, but when working with tougher surfaces it can be a decisive moment: sharpened species are much easier to penetrate plastic and dense boards.
How to refuel?
A construction stapler store can be of two types. The tool is more convenient to use when the store opens. Then inserting the staples into a construction stapler is as easy as into a stationery:
- Pull back the spring.
- Place a block of staples in the store.
- Release the spring.
Important! In the process of work, the stuck bracket can be removed at any time, the unit corrected and continue to work.
In the event that the stapler model is with a retractable magazine, it is also easy to install the staples:
- Release the latch.
- Pull out the spring.
- Insert the staple block.
- Return the spring to its place by locking it into the flap.
Important! With such a structure, it can be quite difficult to remove the staple that is stuck. We'll have to pry it out of the striker, and this can be dangerous - the trigger must be locked in this case.