To clean the toilet from urinary stone plaque, you can use not only purchased products, but also folk recipes. For example, housewives often use soda ash, citric acid, Whiteness, vinegar, and even some of the carbonated drinks for this. If the plumbing has not been cleaned for a long time, then more powerful reagents are used - chemical acids and even electrolyte for batteries. This article will give specific instructions and recommendations on how to use these and other toilet stone cleansers.
Reasons for the formation of pollution
Urinary stone - this is how we used to call plaque that appears over time on the inner walls of the toilet bowl. Plumbing that has not changed for a long time is especially prone to its accumulation, in a very rough surface, which holds a large amount of lime. Even worse, if the toilet bowl is made of metal, and the pipes have been preserved since Soviet times - all this forms a lot of rust, which also contributes to the formation of urinary stone. If you can’t change this rarity for modern plumbing equipment in any way, you will have to clean it at least once a week.
What is the ill-fated urinary stone made of? Most of it is ordinary lime deposits, and microparticles of human waste and rust, retained by lime pores, endow them with a specific smell and shade. This whole mixture is an excellent environment for the life and rapid reproduction of billions of microorganisms that make the smell even stronger and more unpleasant.
To clean the walls of the toilet from the deposits that have formed, you will have to use the help of strong and rather caustic liquids, so be sure to purchase thick rubber gloves before work to protect your skin. The effect directly depends on the time of exposure of the cleaning agent used to the surface of the plumbing, therefore it is advisable to carry out the treatment late in the evening, and the cleaning itself in the morning.
First turn off the water supply, then remove the liquid from the drain tank and the toilet itself. To scoop it out, you can use a syringe or a small jar.
Folk cleaning methods
Of course, many would like to quickly get rid of a urinary stone in the toilet using the available tools at hand. And there are such means. Basically, housewives use for this purpose various acids and liquids containing them, as well as alkaline compounds, which include caustic soda or chlorine.
This can be soda (both baking and soda) or common commercial products such as "Belizna" and "Domestos". It is advisable to refuse to use dry powders to clean the toilet, as their particles scratch its walls strongly, which further contributes to the formation of urinary stone. The following are ways to use these tools.
Lemon acid
It is usually used to remove scale from kettles, but it also copes well with urinary stone deposits. Prepare about 150 grams of citric acid and a sponge slightly moistened with water. With this sponge, apply the powder to the inside walls of the toilet, especially thickly on the area under the rim. No need to rub, the product will corrode everything.
Now leave everything for at least 5 hours, and preferably all night, then clean the toilet with the hard side of a sponge or a regular brush. If the plaque is not completely wiped off, which happens when the toilet has not been cleaned for a very long time, you can repeat the procedure several times until a 100% effect is achieved.
To prevent damage to the drain system due to its contamination, it is possible to treat the inside of the drain tank with citric acid. To do this, fill it with water and pour in a solution of citric acid (100 g of powder per 200 ml of water). Leave to act overnight, and in the morning just drain the water.
Citric acid perfectly breaks down lime deposits, which very often cause failure of the moving parts of the drain system.
Technical oxalic acid
It is usually treated with surfaces before enamel is applied to them. Externally, oxalic acid is a substance consisting of small translucent granules. To get rid of urinary stone from plumbing, it must be used in the same way as citric acid (in its usual form or after diluting it to a liquid paste with plain water or alcohol). Don't forget to protect your hands, as the product can damage the skin.
Vinegar
For processing, an ordinary dining room is perfect. First, the entire inside of the toilet must be dried well. Prepare vinegar and a few scraps of unnecessary fabric. Dip tissue patches in vinegar and apply to the surface covered with urinary stone. Having processed it completely, close the toilet with a lid and wait at least 5 hours.
After that, remove the flaps and use an unnecessary knife to separate the urinary stone from the walls. Soaked in vinegar, it should practically fall off on its own, revealing a brilliant white enamel. If the lower part of it is still quite tight to the surface, repeat the procedure.
To enhance the effect of vinegar, it can be heated, mixed with soda (1 tablespoon per glass) or iodine (1: 1).
Soda
There are two ways to remove a urinary stone with baking soda. It’s worth mentioning right away that the second method is unsafe, so it can be used only in case of urgent need (if it is impossible to cope with the problem by other methods), as well as if there is ventilation in the toilet hood and a tight toilet lid. In both cases, we will use mixed in equal proportions soda ash and baking soda.
In the first (completely safe) you will need a soda mixture and a spray bottle with 9% vinegar. Soda must be combined with a small amount of water and the resulting paste should be applied to the walls affected by the stone, rubbed a little. After half an hour, spray vinegar on top and wait until the reaction between them has passed. Then flush the toilet.
The second method, in addition to the previously listed ingredients, also involves the use of chlorine-containing liquid bleach, which also needs to be poured into a spray bottle. First, wipe the toilet with baking soda with a damp cloth. After 30 minutes, spray vinegar over the baking soda. After all the carbon dioxide is released (characteristic foaming of the mixture), apply a layer of bleach from the sprayer.
During the last stage of treatment, it is advisable not to breathe, you can tie your mouth and nose with a scarf.
The fact is that the reaction of acetic acid and chlorine-containing liquid at the outlet releases a lot of chloride gas, which, when inhaled, causes bronchospasm, intoxication and burns of the mucous membranes, so the fan in the hood should already be working. After finishing the procedure, close the toilet lid as soon as possible and leave the room immediately. After 30 minutes, drain the water and wash the surface with running water.
Carbonated drinks
This is a fairly expensive option for cleaning the toilet, but there are people who prefer it. In fact, the effect of softening the urinary stone with the help of soda is due to the presence in the drink of a large amount of citric acid, which is easy to buy and by itself for an incomparably lower price.
But you need to mess around with the powder, and here it’s enough just to pour about 4 liters of soda into the toilet in the evening and put rags soaked in it on the walls. In the morning, the entire urinary stone can be easily scraped off with a sharp object or rubbed off with a stiff brush.
Use of special tools
Today in stores there is no shortage of products for emergency and regular cleaning of the toilet. Most often they are applied under the rim, from where they flow down the walls. For a complete cleansing, it is enough to wait no more than an hour, then walk along the treated surface with a brush and rinse everything off with water. In especially neglected cases, one such procedure may not be enough.
Since the choice is really very large, try to get the product in the form of a paste, gel or cream. It is worth saying that almost all of them contain hydrochloric acid, which explains their high efficiency. If you feel sorry for spending money on expensive commercial products, you can simply buy pure hydrochloric acid and clean the toilet with it (instructions below).
It is advisable to use powerful chemical agents only if all the others have not helped, because they involve manipulations with strong and rather dangerous acids. Be sure to wear rubber gloves before handling.
Battery electrolyte
The active substance here is sulfuric acid. Pour 200 ml of liquid into the toilet bowl and spread it along the walls with a brush, apply under the rim. Don't forget to lower the lid. After 15 minutes, drain the water from the tank and rub the walls with a brush. Rinse everything again with water.
Hydrochloric acid
Its concentration should be 33%. When using hydrochloric acid to cleanse a urinary stone, caustic fumes are released from it, which in no case should be inhaled. If possible, provide good ventilation in the room. Use the product in the same way as battery electrolyte.
Phosphoric acid (up to 7%)
Pour 100 ml of acid into the tank and the toilet itself, treat the walls with it with a brush. Wait a quarter of an hour and drain the water, rub the surface with a brush to separate the urinary stone from it. Drain the contents of the tank again. During this procedure, the inner walls of not only the toilet itself, but also the cistern are cleaned, which is especially useful if they have already begun to rust. In addition, phosphoric acid does not corrode rubber and plastic, so it can be used in houses with metal-plastic pipes.
Whether you moved to an apartment where the previous owners were sluts, whether you rented a room in a hostel - this piquant problem will be relevant for you.
So - how to clean the toilet from urinary stone?
Reasons for the appearance
Before deciding how to remove a urinary stone in the toilet, let's analyze the reasons for its appearance.
Contrary to the name, the stone is not traces of visiting the toilet dried on the walls. Rather, it consists not only of them.
First of all, these are lime deposits, inevitable where water is taken from artesian wells or from river intakes. That is, in fact, everywhere. Dried, sorry, urine serves only as a spicy seasoning for lime.
So why does a urinary stone begin to grow?
Why do we have to look for how to clean the toilet from the stone?
- A fixed volume of water contains a very specific amount of dissolved minerals.. The more water passes through the toilet, the more lime settles on its walls.
And often most of the water flows through the toilet not during the inevitable visits, but due to an unregulated tank. The water in it goes for free, and the contents of the toilet are constantly updated. - Accelerates the formation of deposits porous or rough surface of the toilet bowl. The smaller the bumps, the less dirt collects on the surface.
This applies to rust, and to limescale, and to urinary stone.
Please note: Glazed sanitary ware toilets have a smoother surface and require less cleaning.
The ideal option is porcelain, it is even smoother. But this is already a slightly different price category.
Stone Prevention Methods
Are there any preventive measures? How to prevent the formation of plaque with an unpleasant odor?
What to do in order not to look for how to dissolve thick deposits?
- Eliminate . Often just adjusting the float is enough to keep the toilet from overflowing. Less commonly, it may be necessary to repair the armature or even replace it completely.
- Purchase cistern tablets. They prevent the formation of deposits and, albeit slowly, but help to dissolve existing ones. In addition, they give the water a pleasant color and smell.
- Remember to clean your toilet at least once a week. Apply any cleanser and wash off after half an hour easily.
Looking for how to remove a stone in the toilet if it has been accumulating for years is tiring. No tool will remove a centimeter-thick stone in five minutes.
Getting rid of existing deposits
Let's go to the store
How to remove a urinary stone in the toilet if it has already grown over several years of use?
What can modern household chemicals offer us?
- Abrasive scouring powders. For example, Pemolux. The principle is clear: we put on gloves, scoop out all the water from the toilet, pour the product and three rags until a snow-white surface appears from under the layer of dirt.
Extremely tiring; unpleasant; in addition, the inner surface of the toilet bowl will become rough after cleaning. The abrasive will leave micro-scratches on the glaze or earthenware surface. If so, it will collect pollution faster. - Alkaline cleaners. From imported - "Domestos", from domestic - "Belizna". As a rule, the basis of the product is a solution of caustic soda.
It dissolves the urinary stone, after which the remaining deposits are washed off with a brush and water.
How to clean the toilet from stone with alkali? Again, scoop out the water and apply it to the pollution. Wash off after half an hour, repeat several times if necessary. “Whiteness”, however, can be simply poured instead of water - its cost is ridiculously small.
Tip: if the tank goes through even a little - before cleaning, turn off the water on the tank, rinse and let the remaining water drain.
Otherwise, the alkali will be quickly washed away, not having time to dissolve at least part of the deposits.
- Acidic cleaners. For example, "Sillit". The principle of operation of such is the same as that of alkalis, it is applied in exactly the same way.
However, acids are noticeably more effective in dissolving stone and other deposits.
Folk remedies
Something tells us that grandmothers and mothers had to deal with long before imported household chemicals appeared in stores. How to clean the toilet from a urinary stone if the store with cleaning products is far away?
Let's think: what acts on the urinary stone in the most effective preparations? Acid, right?
Once we understand this, we just need to find in any accessible place a sufficiently concentrated solution of any acid.
- Dry oxalic acid is used in the chemical industry to etch surfaces before applying enamels.
If you have some of this white matter, you will need it.
How to remove a urinary stone in the toilet with dry oxalic acid? Either apply it to a damp cloth and wipe off the dirt, or dissolve a fair amount of it right in the toilet bowl.
After application, rinse it off and clean the surface with a brush. Don't forget the gloves.
If yours is for sale, you can buy it. This package will last for several years. - Battery electrolyte is also an acid. Apply and wash off after 15 minutes, repeat if necessary.
- In almost any refrigerator there are vinegar essence or bags of citric acid. In this case, of course, the toilet will have to be drained. Do not forget about the pungent smell of vinegar, do not inhale its fumes.
- Another folk recipe was born recently. A bottle is simply poured into the toilet - another Coca-Cola or Sprite.
Citric acid in them quickly corrodes deposits. Which, by the way, makes you think - is it worth drinking these drinks without worrying about your teeth.
Conclusion
As you can see, there are a lot of ways, and you will find some means to fight the stone at home. Good luck cleaning!
Clean plumbing is an indicator that it is regularly looked after. The toilet is used frequently, so a variety of dirt accumulates in it. If small deposits are not removed in a timely manner, they will harden and it will not be so easy to get rid of. The main problems encountered when cleaning the toilet are limescale and urinary stone.
Causes of plaque
Limescale (or water stone) is formed from calcium and magnesium salts found in water. These are plaque and stains of yellow-orange color that appear in the flush areas, on the bottom of the toilet bowl, under the rim and even on the lid. The more time passes between scheduled cleanings, the thicker the layer of deposits and the more difficult it is to clean them. Lime deposits also need to be cleaned regularly or
A urinary stone is the result of sedimentation of minerals contained in the urine. If you periodically forget to wash off the water, ugly streaks form on the walls, and then a gray-yellow stone.
The appearance of deposits is also facilitated by:
- hard water,
- cracks and irregularities on the surface
- leaking tank
Attention! In addition to its unsightly appearance, a stone in the toilet is a source of unpleasant odor and a favorable environment for bacteria.
You can clean the toilet from limescale and urinary stone with the help of improvised means that can be found in any home. In especially advanced cases, if the toilet is old or has not been cleaned for a long time, you will have to resort to aggressive chemicals.
Toilet cleaning rules
- Take care of protective measures. Be sure to wear gloves on your hands, and if using caustic substances, wear a protective mask so as not to inhale the fumes.
- Remove the water from the toilet, scoop it out with a ladle or use a plunger. Soak up the rest with a rag. This must be done for the best effectiveness of the applied funds.
- Apply the selected product for several hours.
- Remove deposits with a stiff brush or brush.
Removal of thin and medium plaque
Cleaning with baking soda and vinegar
This is a fairly strong tool to help remove the middle layer of limescale and urinary stone.
- Heat the vinegar to 40 degrees. This emits a pungent odor, be careful!
- Add baking soda: 1 tablespoon per 200 ml of vinegar.
- For greater effectiveness, add iodine.
- Pour the sizzling mixture into the toilet so that it covers the deposits. Under the rim of the toilet, where the stone also accumulates, lay toilet paper soaked in vinegar.
- Leave for 8 hours or overnight.
- Clean off the plaque with a brush. Hard-to-reach places can be cleaned with a toothbrush.
- Rinse off with water several times.
Citric acid can dissolve a thin layer of urinary stone and limescale.
- For this method, it is not necessary to remove water from the drain.
- Pour 2-3 sachets of acid into the toilet and close the lid.
- Wait 2-3 hours.
- Scrub thoroughly and rinse with warm water.
If in one application the entire plaque has not dissolved, repeat the method 2-3 times and there will be no trace of pollution.
White
The application is simple:
- Pour the bottle into the toilet without water.
- Close the lid and leave overnight.
- Rinse with warm water and then apply the brush.
Soda
Soda will help clean the toilet bowl with slight dirt. It is better to use calcined.
- Sprinkle Baking Soda on Contaminated Areas
- Leave to act all night
- Wash off with warm water in the morning
Coca Cola
You can also remove yellow plaque and rusty stains with the help of Coca-Cola.
- Pour a large bottle of soda into the drain
- Leave for the night
- Scrub with brush and rinse with water
Household chemicals
- Powders. The most popular: "Komet", "Pemolux", "Chistin", "Biolan". Their action is based on the abrasive effect. Some contain chlorine. Applying them is simple, but you need to remember that mechanical action leaves micro-scratches on faience. Over time, dirt will clog in them, so in order to extend the life of plumbing, it is better not to use powders.
- Liquids. For example, "Whiteness", "Sanoks". They are poured into the place of contamination and left for some time to act, then washed off.
- Gels. This form is most convenient for cleaning: due to the thicker consistency, they slowly flow down the walls of the toilet bowl, corroding plaque. Gels are applied under the rim of the toilet bowl, the exposure time is about 30 minutes. Then a brush is applied and the product is washed off. Gels contain strong acids and alkalis. For example, "Toilet Duck" contains 15% hydrochloric acid, so it will do a great job with a stone in the toilet. "Domestos" is mainly used for disinfection.
- Creams. It acts like a gel, but has an even thicker consistency. The cream is applied with a sponge or brush on the contaminated surface, time is given for exposure, then washed off. The most famous is "Cif". Creams are more economical consumption and gentle effect on the surface.
- Tank tablets. They are used for the prevention of lime and urinary stone, and also provide a pleasant smell and cleanliness with each flush. The tablet is placed directly into the tank, and with each flush, it turns the water into a bright color. Clear water is a signal that a new pill is needed.
Removal of thick plaque with strong acids
If no folk and cleaning products help, strong acids can be used. These are extreme measures that you should rarely resort to and strictly observe the exposure time, since such chemistry can corrode the enamel and harm pipes and plastic parts.
Oxalic acid
Medium toxic organic acid. A popular plumbing cleaner in the days of our grandmothers. Provides perfect whiteness and effectively removes stone. Nowadays, it can be purchased at hardware stores. Before use, carefully read the instructions and put on thick rubber gloves.
Mode of application:
- Sprinkle powdered acid on a damp cloth.
- Apply to contaminated areas. If you need to clean the drain, dissolve it in water.
- Wait 1 hour, during which time the plaque will dissolve.
- Rinse thoroughly with water using a brush.
It is an inorganic acid of medium strength. With it, you can not only clean the toilet from the stone, but remove rust from the internal parts of the tank. The main advantage of this acid is that it does not damage rubber and plastic elements. Mode of application:
- Pour 100-150 ml of acid into the tank and into the drain hole
- Wait 15 minutes
- Rinse with plenty of water and scrub with a brush.
Hydrochloric acid
This is a very strong toxic agent. Will instantly remove the stone, but should be used with extreme caution. Before use, put on goggles, a respirator and thick rubber gloves. Vapors of this acid are also dangerous!
Mode of application:
- Apply the liquid to the walls and pour half a glass into the drain hole.
- The exposure time is 10 minutes.
- Rinse with plenty of water
Attention! This method is not suitable if you have plastic pipes installed, they will leak from acid damage.
Electrolyte
The battery electrolyte is produced on the basis of sulfuric acid, you can find it in any store for motorists. This strong and very dangerous remedy perfectly dissolves limescale and urinary stone. It can only be used in rare cases. The method of application is similar to the method with hydrochloric acid: apply, leave for 10-15 minutes and rinse with water. When applying, follow all safety measures, avoid splashing the product, as you can get chemical burns.
Preventive measures against limescale and urinary stone
- Clean the toilet bowl at least once a week with special cleaning products. The frequency of washing depends on the number of people who use the plumbing.
- After each use, drain the water and use a brush if necessary.
- Don't let the tank leak. To do this, timely make minor repairs or replacement of drain fittings.
- Use soap products that are placed in a tank or attached to the walls of the toilet. They will help maintain cleanliness between cleanings and provide a pleasant smell.
- Don't flush greasy food down the toilet.
- If you are buying a new toilet, choose the smoothest possible product, preferably made of porcelain. Plumbing porcelain is more expensive than faience, but due to its dense structure it is smoother. Accordingly, it will become less and less polluted. It is also worth buying a product with a two-button drain, which will reduce water consumption.
As you can see, the rules are simple. It is much easier to take care of plumbing in a timely manner than to remove the “thickets” of stone and plaque on a running product.
Lime deposits form on the surface of any plumbing fixtures, with which you constantly have to fight. The toilet bowl, in addition to limescale, also pleases us with the appearance of urinary stone on the walls over time. And the hostess is faced with the question: how to clean the toilet from limescale and urinary stone? The task, it would seem, is not an easy one. But in our age of scientific progress, there are many ways to get rid of these malignant misfortunes. Let's take a closer look at the ways in which you can return our toilet bowl to its former whiteness.
Causes of urinary stone formation
We all know that limescale appears as a result of the deposition of minerals contained in our water. But not everyone knows what a urinary stone is and where this attack comes from. Such plaque is essentially the interaction of the same minerals from the water with minerals that are excreted in the urine. As a result of their interaction, a dense gray-yellow coating is formed, which housewives do not like so much.
Let's look at the reasons why it begins to grow rapidly and bring inexperienced housewives to nervous spasms:
- Very often this can be seen in a house where there are small children who do not remember what needs to be drained behind them. That is, the main reason for the occurrence of urinary stone is untimely or insufficient draining. In this case, mineral deposits from the urine settle on the walls of the toilet and remain there.
- Such a problem can occur if the drain tank is malfunctioning.
- If you have a toilet bowl with a rough surface or an old toilet bowl at home, then the likelihood of a raid increases many times over.
Important! The urinary stone grows and increases over time, therefore, at the first signs of its appearance, you need to “take the bull by the horns”, or rather, begin to fight it immediately.
How to wash the toilet from urinary stone at home? How to do this - we will tell you now.
Dealing with urinary stone
How to clean the toilet from urinary stone at home? The easiest way to get rid of this scourge is to use household chemicals.
Special household chemicals
Find the right toilet cleaner. This can be done by examining the labels or by consulting with the seller.
Important! Don't forget that you will also need gloves and a respirator. But children and allergy sufferers need to be evacuated at this time.
Operating procedure:
- For the best effect, you need to drain the water from the toilet. This can be done with a mug or in any other way convenient for you.
- Now you need to put on uniforms - gloves and a respirator.
Important! You don't have to, of course, but most chemicals are very aggressive and can cause a lot of trouble later on when working in a small space with bare hands.
- The remedy of your choice should be applied to the places where the urinary stone appeared and left for several hours.
Important! During this time, you can not use the toilet.
- When enough time has passed, rub the treated areas with a brush.
Important! Do not use metal brushes. They can scratch the surface of plumbing, as a result, plaque will form even faster.
If the layer of plaque was thick, then you are unlikely to be able to get rid of it on the first try, but several repeated procedures will do their job and help to cope with the problem.
In addition to various popular toilet cleaners, there are other ways to clean the toilet from lime deposits and urinary stone using chemistry.
How else can you remove a urinary stone in the toilet?
Bleach
You can buy a bag of bleach, pour it down the toilet and leave it overnight. This will destroy the stone and kill the bacteria. And yes, it will cost you less.
Anticalc
This tool will cope with any plaque. Pour it into the toilet and leave it overnight, and in the morning remove the remaining dirt with a brush.
Oxalic acid
Oxalic acid copes very well with similar problems. It is crystals. They can simply be poured dry on problem areas or diluted with water or alcohol.
Hydrochloric acid
A very good remedy is a 33% hydrochloric acid solution. But this requires great care - the product is toxic, it is necessary to protect hands, respiratory organs.
Wipe the walls, pour a glass of product into the toilet bowl, and you will quickly get rid of all kinds of dirt in 15 minutes. At this time, the toilet lid must be closed.
Important! Do not use this tool if the toilet is connected with plastic pipes.
Liquid battery electrolyte
This method can be used in rare cases - this powerful tool will perfectly clean your toilet from any plaque, because sulfuric acid is included in the composition.
Tank tablets
How to wash the toilet from stone and plaque? On sale there are special tablets for the tank, which are suitable both for the fight against urinary stone and limescale, and for prevention. It is enough just to put one tablet in the tank. The water will turn into any color.
Important! This tool disinfects and disinfects the surface of the toilet bowl, extending its service life. In addition, it usually has a pleasant aroma.
Cleaning folk methods
In the fight against urinary stone, all means are good, and especially folk methods, because they have been tested for more than one year. Remember to protect your hands and respiratory organs and protect your eyes from splashes when using any of the following:
- In the fight against urinary stone, table vinegar will help you. It will soften any deposits on your plumbing. Before applying it to problem areas, pump out the water from the toilet and wipe the inside with a dry cloth. Leave for 2-6 hours and then brush with a brush, not a metal one. This cleaning can be repeated several times until the toilet is completely clean.
- If just vinegar did not help, then mix it with baking soda - one tablespoon of soda goes to 200 grams of vinegar, or with iodine in a ratio of 1 to 1, and heat it up to 50 degrees.
- How to remove a urinary stone in the toilet? One of the simplest and most affordable remedies is citric acid. A few sachets of this remedy per night can dissolve any plaque. Moreover, the procedure can be repeated several times until the problem is completely solved.
- Help to cope with the problem and baking soda, generously sprinkled on places with deposits. They also fall asleep at night and leave it, and in the morning they clean it along with the remnants of plaque. For greater efficiency, any cleaning agent can be added to soda.
- As a last resort, you can try the power of Sprite or Coca-Cola. They contain a lot of citric acid, which will dissolve plaque. You will need 2-3 liter bottles, which will have to be poured into the toilet.
Prevention measures
To avoid such serious problems, you need to take preventive measures and not bring your toilet to the point where it has to be cleaned with hydrochloric or sulfuric acid. Urinary stone appears gradually and grows on running plumbing. Therefore, we take preventive measures:
- Periodically clean the toilet bowl with special means. Any product, especially chlorine-containing, will cope with small pollution.
- Make sure your tank is not leaking. If it is faulty and flows all the time, this leads to the formation of plaque. Especially in areas with hard water.
- An excellent prevention will be special plates that are attached to the walls of the toilet. They clean the surface with every flush.
- Urinary stone forms faster on rough surfaces, so do not pour hot waste into the toilet so that microcracks do not form.
- If you have a very old damaged toilet, then the problem will not be solved so simply, you need to buy a new one with a glossy surface.
The appearance of urinary stone and limescale is not a one-day process. It is unlikely to harm health, but it is quite likely to harm sanitary ceramics. In addition, the sight of a dirty toilet or sink can spoil the whole picture of your immaculate bathroom. Today we will tell you how to deal with the worst enemies of sanitary ware and earthenware in ordinary, home conditions.
Causes of deposits
In order to choose an effective way to deal with deposits on sanitary ceramics (faience), you first need to find out the reasons for their appearance, composition, etc. The proverb “You need to know the enemy by sight” is also appropriate in our difficult task.
Plaque not only spoils the appearance, but also destroys the enamel of the plumbing device
Limescale is a deposit of minerals, which are found in excess in tap water, on the surface of ceramic and chrome products. Basically, pollution is formed in the places of flushing in the form of yellow-orange smudges. Moreover, the more often the water in the toilet is flushed, the faster the plaque forms.
Important! If plaque is not removed from the water supply nozzles in time, deposits can cause them to become clogged. Keep track of the status of each of your "home assistants".
A urinary stone is a deposit of minerals found in the human body. They are excreted along with the urine and settle on the walls of the ceramic product. Combining with the minerals contained in the water, they form a dense and very unaesthetic layer of gray-yellow color. Irregularities in the ceramic coating exacerbate and accelerate this process.
If ceramics are initially of poor quality, then plaque forms on it faster due to the porosity of the material
When choosing sanitary ceramics, check the smoothness of the inside surface of the bowl. The ideal option is to purchase a product made of sanitary porcelain, unlike cheaper faience, it has a dense structure. This is achieved due to the elevated temperature at which the product is fired. And it is the density that makes porcelain toilet bowls smoother, and plaque and stone do not so quickly eat into the structure of porcelain, so it is much easier to clean it with your hands.
It should be understood that sanitary china is a material for the manufacture of elite sanitary ware, therefore its price is much higher than that of faience models. Whether to attribute this feature to the minuses is up to each user to decide independently.
Porcelain product
The main reason for the appearance of deposits of any kind is the neglect of preventive methods for cleaning ceramics. It should be remembered that the more often the scheduled cleaning of the toilet room and the cleaning of plumbing is carried out, the longer the toilet remains in its original form.
Cleaning with improvised and folk remedies
To clean the toilet, sink or shower tray from plaque, it is not necessary to run to the store and spend money on expensive chemicals. In addition, effective substances are expensive, and you don’t want to spend money on ineffective ones. In order to save yourself from unnecessary waste, and the toilet from limescale and urinary stone, you can use improvised means that any housewife always has in her arsenal. So, several ways to clean plumbing, borrowed from the people.
Lemon acid
The main enemy of lime deposits is citric acid. It very effectively fights deposits that have not reached their critical point.
Citric acid is an excellent plaque remover
For this you need:
- purchase 3-4 sachets of the substance;
- apply to contaminated places;
- close the toilet lid;
- wait 4-5 hours (better until morning);
- rinse off the water, carefully treating with a brush.
For greater efficiency, you can repeat the procedure several times.
Acetic acid
Works the same way as lemon. But for its use, vinegar essence must be prepared:
- measure 250 g of vinegar essence or food vinegar 9%;
- heat the liquid to 45-50 ° C (be sure to cover the container with a lid to avoid a pungent vinegar smell);
- pour warm vinegar into the toilet;
When working with acetic acid, do not forget to protect the airways with a bandage.
- for efficiency, you can add a little baking soda (2-3 tsp);
- be sure to close the toilet bowl with a lid;
- leave for 2-3 hours or overnight.
In the morning, rinse the bowl thoroughly with water and rub it with a brush or other brush.
Oxalic acid
This tool is now receding into the background and comes across on store shelves less and less. But if you met it on the modern market, feel free to buy it, because it is a cheap and effective way to restore the original whiteness of your ceramics. It is necessary to apply the product on a slightly damp soft cloth or sprinkle on the places where the urinary stone and plaque are deposited. Feel sorry for the substance is not worth it. After treating mineral accumulations, clean with a brush and rinse thoroughly with clean water.
Oxalic acid will clean the surface of the toilet in a short time
Baking soda
This drug is in the kitchen of everyone. With the help of soda, you can enhance the effect of acid, acetic or citric. Soda that has fallen on contaminated areas destroys the structure of minerals and completely removes plaque from the surface of ceramic products. To clean the toilet, you will need at least 200 g (1 pack). For greater effectiveness, it is better to leave the drug to work all night. In the morning, all that remains is to brush the bowl with a brush, cleaning off the remnants of mineral deposits.
Coca Cola
No matter how strange it may sound, this wonderful drink can not only quench your thirst, but also remove old limescale. To do this, pour 1-2 liters of liquid into the bowl and leave overnight. How the cleaning properties of Cola were revealed is unknown, we can only assume that the drink was poured into the toilet by a caring mother, who later discovered that he "ate" all the deposits.
Important! Although improvised means do not have a high concentration of acids or alkalis, it is necessary to work with them with gloves. And when using vinegar, you need to take care of the respiratory tract.
Some housewives even use Cola to remove plaque.
Chemistry on guard of purity
Improvised substances can clean non-critical pollution. When lime deposits look more like a toilet bowl coating, and the formation of a urinary stone has acquired a dark brown hue, folk remedies are useless. Only heavy artillery in the form of powerful chemical cleaners can cope here.
Very important! With caustic chemicals it is necessary to work only with rubber gloves! Do not neglect safety when using!
It is best to use specialized detergents that are designed only for toilets. Be sure to read the product label before use.
After keeping the product, be sure to brush the bullshit
With critical and extremely abundant growths of mineral deposits, you can use a liquid electrolyte, which is used in car batteries. Use it only as a last resort, when other means have not brought results. It contains sulfuric acid in its composition, so do not forget to take care of your own safety.
Preventive control measures
Everyone knows that it is much easier to prevent the appearance of pollution than to look for means to combat it. In order to prevent the spread of deposits of lime and urinary stone, you need to use a few tips:
If the toilet is kept clean, there will be no need to use caustic chemicals. With proper care, your ceramics will shine clean for a long time.
How to wash the toilet from plaque and rust: video
How to remove plaque: photo
