A metal wicket, like a gate, is a necessary part of any fence. Moreover, you can build the rest of the fence from another material. And the addition of forging elements will make the wicket more attractive, while not disturbing the aesthetic appearance.
They are intended for passage or passage beyond the perimeter of the fenced area. In this article we will show you how they are built.
Preparation for work
Before you start manufacturing, you need to decide which gate you want to put on your site. Beautiful metal wickets are obtained with forging elements. It is better to order them in a company that deals with such work, giving the dimensions of the future structure and having decided on the choice from the proposed sketches - place an order. Samples of wickets made of metal and gates with forging elements can be seen in the photo:
If you want either a profile pipe, then you can do it yourself. Instructions or step-by-step actions of the whole process are given below.
In order to, you need to be able to use a welding machine. If there is no such skill, then invite a knowledgeable person to help.
So, for work we need:
- welding machine or converter;
- a welder's mask and a canvas suit (it will protect against sparks during welding);
- grinder with discs for cutting and cleaning metal;
- locksmith's hammer;
- personal protective equipment (glasses, gloves, respirator).
Advice! Do not neglect the safety rules, use protective equipment, this will save you from injuries, burns and preserve your health.
Build process
First, let's talk about how to install the poles for the future wicket. If you have them made of brick, then metal mortgages are made in the masonry to weld loops to them, as shown in the photo:
For metal pillars, use or pour concrete for each pillar separately. Moreover, under metal gates and wickets, the installation is carried out with a more thorough tamping under the racks, so that subsequently there is no roll of the pillars and your disappointment from the work done.
Welding the gate
- A metal wicket is usually the same height as the fence itself. In some cases, fifty centimeters recede from the top of the fence - this distance depends on the height of the fence. We choose the width so that you can pass with a wheelbarrow or hold a walk-behind tractor, we will take ninety-eight centimeters, as shown in the photo:
- Then we cut off two pieces of a profile pipe of the required width with a grinder. They will go to the top and bottom of the future design. You will need another piece of pipe equal to ninety centimeters. Let's weld it in the middle.
- Then we cut off two more pipe segments with a grinder, equal to one meter forty two centimeters. They will go to the side of the structure.
- Let's start the welding process. We put the profile pipe on a flat surface and weld together, by means of electric welding (photo below).
After we welded all the parts, we got a rectangle with a crossbar in the middle measuring ninety-eight by one and a half meters.
The next step is to weld the hinges to the resulting frame. Hinges are easier to buy, their price is not high, and this will facilitate the work, which is important.
We will be using garage door hinges. Installation:
- separate them into two halves;
- weld the part with the pin to the metal gate;
- the second to the fence post;
Note! Do not confuse, the hinges without a pin are welded onto the gate.
- during welding, we make sure that the hinges are flush with the profile pipe and strictly parallel to the wicket;
- we beat off the slag with a hammer from welding to a clean seam;
- we clean the welded seams with a grinding disc with a grinder;
- paint the gate with anti-corrosion soil.
Now we begin to install our gate in the opening of the fence.
- First, you need to weld the second parts of the hinges to the post, making sure that they are located at the same distance as on the gate itself.
- We connect the hinges to each other and align the gate in the opening.
Thus, we have installed the wicket. It remains now to attach a profiled sheet or weld a profiled pipe, depending on what your fence is made of.
Today, in low-rise construction, sectional garage doors with a wicket are gaining more and more popularity; they have an aesthetic appearance. And also do not affect the local area during work, which gives you the opportunity to use it for a flower bed or lawn.
The figure clearly shows the principle of operation:
Making metal gates is a laborious job and requires certain knowledge and skills from the master. Our store offers a wide selection of models that will please even the most fastidious and demanding customer.
Metal fence gates are distinguished by their durability. The structure consists of a reinforced frame, 2mm thick sheet steel and forged fittings. Our models are distinguished by their sophistication. They will be able to adequately complement any interior and successfully highlight your home and plot.
Relevance of choice
For a garden or a plot, beautiful metal gates with a swing structure may be suitable. Such models are especially reliable and durable. The price of such products is low. The production of swing gates has been carried out by experienced craftsmen for many years. They never go out of style.
Installation of models provides for installation so that the wicket opens in a direction convenient for you. Installation of automation is also available. Metal fences will become reliable protection from ill-wishers, and the use of decorative forged elements will give it a touch of style and sophistication. On our site you can find many models of gates, gates and fences, which will be made in the same style. Such a decision will be beneficial in advance for you and your personal plot.
Why is metal preferred?
For many years, metal structures have been very popular. Such wickets have a number of advantages:
- metal is the most durable material;
- the frame is made of metal sheets 2 mm wide;
- forged elements are securely welded to the grid;
- you can choose any color scheme from the five we offer;
- a wide range of styles of ready-made designs.
The service of making wickets to order in Moscow is convenient, because such a solution allows you to satisfy all the whims of the client in terms of design design. The cost of the models can be confidently called democratic.
Our staff will help you with the choice and advise which model will look more interesting in the overall picture of your site.
Using metal fences
On our website, you can order an online product that will be of interest to you and will become a real decoration of your personal plot. Metal wickets are installed as an additional structure to the gate. Often they are installed together with a garage fence, this option provides additional access to the room.
An interesting solution would be to install wickets in sliding gates. It is economical and convenient. At the request of the client, a wicket can be made that combines several styles: make a solid fence, add interesting forged elements to it. This option will help you secure your home, hide it from prying eyes.
What is a gate for?
In any country house, forging will become a worthy part of the interior. Such elements are able to emphasize the sophistication of the owners' taste, will help to decorate the facade beautifully and interestingly. Forged products are also used for interior decoration.
The elements are widely used in the manufacture of gazebos, balconies, gates, stairways, etc.
In addition to aesthetic beauty, such products are popular due to their strength and reliability. The metal structure can withstand heavy loads, withstand changeable weather conditions.
High quality guaranteed!
If you have not yet decided where to order a metal gate online, check out our catalog. Only the best products from skilled craftsmen are presented in our store. Our employees will not only promptly deliver the product, but will help with its installation. Wickets, which will serve for many years, are presented on the site in a rich assortment. Delivery does not take more than three days. If you have any questions, please contact our consultant for help. He will help you make your choice and give detailed installation instructions.
Many people make a wicket separate from the gate. You can make a metal gate with your own hands so that it will decorate any building. When performing this process with your own hands, you can bring to life all your most daring ideas and unexpected decisions. Forged elements will help to add solidity to the product and decorate it. And thanks to the electric drive, you no longer need to go outside.
Before starting work on the production of this metal product with your own hands, you need to choose a place where the gate will be installed. You should also take measurements and arrange all this on paper in the form of a diagram.
Materials for the production of wickets
- metal blanks are selected with a high carbon content, since it is it that corrodes the least and, accordingly, will last much longer;
- metal sheet (thickness not less than 1.5 mm);
- pipe or profile for posts (diameter not less than 100 mm);
- profile pipe or corner (section not less than 25 mm);
- special liquid or gasoline, which will be necessary for anti-corrosion treatment;
- dye;
- mixture for priming the surface of the metal profile;
- electric drive or lock.
Tools for the production of wickets
In order to, it is imperative to prepare all the tools that will be needed during work:
- nylon thread - will be needed for marking;
- welding (power 220 W);
- hand drill or sledgehammer for driving posts;
- screwdriver with which the metal is attached;
- grinder - needed for cleaning and cutting metal;
- scissors for metal;
- shovel.
How is the installation of the wicket
Making a gate with your own hands at home is a fairly simple matter. And besides, it will save financial resources. After the materials and tools are purchased and prepared, the direct manufacturing process begins.
Columns on the sides. A wicket made of a metal profile with your own hands is fixed on posts that are mounted in the ground not less than m. The first step is to mark and mark the installation site. Then the grinder cuts off the length of the column blank with the addition of 1 meter. Next comes the turn of the surface treatment. For this purpose, corrosive traces are removed from the metal profile with the help of an anti-corrosion liquid and a grinder. After the pillar dries, a white bloom forms on it, which is removed with a rag.
Using a hand drill, a hole is drilled in the ground, which you can simply dig, in the places where the markings are made. The hole diameter should be 10 centimeters larger than the pipe diameter. After this, a liquid solution is prepared. Cement grade 300 is mixed with sand (1: 3). The mass should be homogeneous, it is necessary to bring it to a liquid state, gradually adding water. The installation of the pillars is carried out in prepared holes, which are covered with rubble. You can also use other stones from the site. As a result, the crushed stone is compacted.
Brick pillars. The gate can be fixed on brick pillars. To do this, metal products should be revetted with bricks. It will be both beautiful and reliable. The building will look more solid. The solution is prepared in the same way as above, but it should not be liquid. The laying of the first row begins with a whole brick, and the second row is laid with 3/4 of a brick, for a more rigid bond. After the solution dries up, join the rows. On top of the pillars, metal or decorative caps are installed at will. This will allow water to drain away from the product when it rains.
Frame. A hand-made metal gate consists of a corner or profile. The choice of frame material depends on the wishes of the owner. In general, this is not a fundamental issue, because the installation is carried out in the same way for everyone. This work requires special care.
In order not to disturb the configuration, you need to carefully measure the dimensions. For competently carrying out work with your own hands, a good place is required to place the structure. The channel is laid along the perimeter. Its size should be 15-20 centimeters less than the product. You should ideally maintain the plane using a level. The adjustment is done by means of shims placed under the channel. A corner / profile is cut in accordance with the indicated size. Burrs are removed with a grinder. The workpieces are laid out at the workplace and secured. Then the joints are welded by welding. Also, the bottom and top or side posts are welded together - this way the rigidity of the structure is achieved. Only spot welding is used, the seams of which are cleaned with a grinder with a grinding wheel. The final stage is processing with gasoline or anti-corrosion liquid.
Attachment to pillars. Do-it-yourself fastening of the wicket to the posts should be done only with the help of powerful fasteners. It is best to use a curtain with a built-in bearing.
Metal sheet fasteners. This is the final touch of installing a wicket with your own hands. It is necessary to carry out the following actions:
- cut a sheet from a metal profile of the required size;
- remove burrs on cuts;
- fix the sheet on the product frame;
- treat a metal surface with an anti-corrosion liquid;
- paint and hang on the hinges.
After the installation work has been done with your own hands, you need to install a lock or connect an electric drive. This is already done at the request of the owner.
For more than a thousand years, art forging has been considered a real art. Forged wickets, gates and fences are especially appreciated. Modern forging combines sophisticated style, incredible strength and durability. In addition, it is often used in architecture to emphasize the uniqueness of the building.
As is known in ancient times, forged gates were used to enter the territory of the castle. They served not only as decoration, but also as a reliable protection of private territory. Today you can also create a unique medieval atmosphere of your country "castle". It is enough to put a wrought-iron gate, fence or gate. Some even complement the street interior of the house with wrought iron bars on the windows, graceful railings at the entrance, or benches for relaxing in the garden. All this points to the refined taste of the owner of a country house.
Artistic forging is a rather laborious and complicated process. Therefore, a master must not only be physically strong, but also have great creative potential. After all, wrought-iron gates often indicate the social status of the owner of a country estate.
The undeniable advantages of forged fences
Wrought iron gates are often considered the hallmark of a country house. After all, before getting into the house, the guests are faced with them. Original forged products create a pleasant impression of the taste of the owner of the suburban area and his preferences. In addition, items for fencing, made with the help of artistic forging, are reliable protection from "uninvited" visitors.
The forged gates shown in the photo fully convince of the validity of these words. Powerful metal rods, made in the form of various patterns, amaze with their magnificence and style. Each copy is truly individual and unique. Is there something that can easily destroy them? It is impossible with bare hands. 
Mainly forged products have a number of advantages:
Live examples of photos of forged gates and wickets show the main advantages of such products. In general, their strength, a variety of options and a harmonious combination against the background of the main fence are visible. 
The image helps you choose the most suitable option for a summer residence.
An electric or mechanical lock can be installed on wrought-iron entrance fences with little effort. In addition, it is possible to install an automated system for opening a wicket or gate. And covert video surveillance will help fix unfriendly visitors.
Suitable material for the manufacture of forged products
Most often, ordinary steel is used to create beautiful wrought-iron gates or gates. To extend its service life, a protective coating is used, which is performed using a primer or nitro paint. After being thermally sprayed onto the surface, the original material takes on a vintage look.
To create an original pattern, the joints of the forged elements are covered with nitro paint. The finished product is treated with a special anti-corrosion solution. Thus, the product will serve as a kind of visiting card for its owner for a long time. 
Since the process of creating a forged gate with your own hands is quite complicated, you should pay tribute to the masters. Each operation is performed by hand, so in general the result depends on his talent, creativity and skill. Before starting work, you should decide on the choice of design, pattern and shape of the product. Various photos of sketches of forged gates help a lot in this. After examining the image, you can imagine in detail what the product will be in reality. Original patterns and laces made on a sketch are much easier to recreate than to keep them in your head.
Sketches of future gates: 
To make the wrought-iron gate look especially beautiful, metal lace is placed on corrugated board or metal sheet. This design looks rich and stylish.
When such a gate decorates the entrance to the peace house of a country house, one involuntarily wants to constantly return there. Especially in summer, if climbing plants grow nearby, which gracefully wrap around the structure.
A stunning tandem - gate with an internal wicket
Of course, the desire for the perfect design of the entrance to the summer cottage is good. But it is important to remember the main purpose of the gate and wicket. Interestingly, there are different types of gates:
Various pictures of wrought iron gates and photos of gates show the practicality of the product and its beauty. As you can see, they look quite solid and unique. They effectively ennoble the suburban area at any time of the year. And they serve as a reliable wall from ill-wishers. Behind such a fence, you feel completely safe. 
As you know, art forging products are harmoniously combined with wood, stone, concrete, metal and brickwork. The forged gate shown in the photo with a wicket inside the gate is a classic option for a country house. 
This design has a wonderful pattern that breaks as it moves. Thanks to the wide field for drawing, it is possible to create unique compositions.
We make forged gates and wickets ourselves - video
Errors in the manufacture of forged gates and wickets - video
Many owners of country houses prefer to make the wicket separately from the gate. Moreover, you can build it yourself from different materials, but most often they use wood or metal. Such a product will decorate any site, but before proceeding with its construction, you need to choose an installation site. You also need to take measurements and draw up a diagram.
Finding the installation location
The gate should be installed so that there is a free passage to the house. In addition, there should not be any pits next to it, otherwise dirt and water will accumulate in the recesses all the time.
You can do several gates with your own hands, for example, one will be input and the other will be rear to reduce the distance covered. Moreover, additional doors can be built from wood.
Design features of the wicket
To make metal gates with your own hands, you will need the following elements:
- The frame that serves as the base of the door in the fence;
- Sheathing;
- Sheds for fixing the product;
- Latches.
Particular attention should be paid to the cladding, since a variety of materials can be used for the construction of a metal wicket: profiled sheet, galvanized steel, mesh-netting or reinforcement. When choosing a cladding, it is better to first look at the photo of how the product will look with it, since there are many of them on the Internet today.
Installation of side posts
A metal gate is attached to posts, which are deepened one meter into the ground in order to prevent the product from sagging under its own weight. Then the markup is done and the place of installation is marked.
With the help of a grinder, you need to cut off the length of the post from the workpiece, adding one meter to it. Then the surface is processed: removes traces of rust with an anti-corrosion liquid and grinder. When everything is dry, a white bloom will appear, which should also be removed with a rag.
You will need a grout to fill the holes. To make it, you need cement mix with sand in a ratio of about 1: 3... You should get a homogeneous mixture. A little water is added to it, and the mass is brought to a liquid state.
The next step is to install the pillars. Crushed stone or any stones must be poured into the drilled holes - everything must be tamped. Then the supports are poured, but be careful about their exposure. The perpendicularity of the installation should be checked with a plumb line.
Do-it-yourself wicket frame creation
For the manufacture of the frame, as a rule, a metal corner is used. It gives the product durability and strength. Before proceeding to the construction of a door in the fence, you need to decide in advance on its size. By the way, the bottom of the gate should be slightly higher than its posts how it looks you can see the photo.
Several metal profiles will form the basis of the frame, one of which will be additional. The length of the last item should be the same as the width of the metal. This profile will create additional rigidity as it will be placed in the center. Such a frame will last for many years.
Product casing
For such purposes, any suitable material will do. In addition, the door in the fence can be made open with a pattern of bent reinforcement. But, if they make a blind gate, then they use:
- Edged board... It will go well with the corner base. Fix the boards to the additional profile and frame with screws.
- Fence netting... Most often, country gates are built from it. Fasten it with the ends of a wire or self-tapping screws with a wide head.
- Solid sheet metal... It is cut to the size of the frame, applied and secured by welding. It is also advisable to use rivets for fixing. It is not necessary to use sheets that are too thick - 2-3 mm will be enough.
It is better to sheathe the front side of the wicket made of metal with a galvanized sheet, since without galvanizing the material will quickly turn black.
Attachment of awnings and latches
The awnings consist of different parts. So, one side is attached to the door, the second should be fixed to the supporting pillars of the wicket, and the third should serve as a fastening part. True, such a gate will weigh a lot. For its installation, simple fasteners may not be enough. You need to fix the canopy with a weld, however, if the gate is not heavy, then you can use rivets, because with them the appearance of the product turns out to be more aesthetic.
The latch can be a metal plate. It will move out of the wicket, thereby holding the entire structure. Some also use a chain or a hook as a latch, but it's better to look at the photo, which looks prettier.
Metal wicket decoration
In order for this metal product to turn out not only beautiful, but also stylish, it is necessary to decorate it with forged details. They must be welded immediately after the wicket is assembled. Thus, it will be possible to accurately paint it. Decorative items are sold in any hardware store... In order to save money, you can make similar products with your own hands from a photo from a reinforcement or a thin profile.
If you plant climbing plants next to the gate, you will be able to create shading of the space. You can also decorate the gate with original handles, but they will have to be combined with other decorative elements.
After creating a wicket with your own hands, it is necessary to clean all welded seams and metal surfaces from traces of corrosion. Open everything with a rust converter, and remove the film that appears after the product dries with a piece of cloth. Metal elements must be well primed. On top of the primer layer, all that remains is to apply the paint in several layers. All metal wickets are ready!