Multifunctional SBS (polymer) -modified, weldable roofing and waterproofing material of increased reliability.
Flexibility on a bar R \u003d 25 mm, not more than - 25 0 C, heat resistance + 100 0 C
intended for the device of a roofing carpet of buildings and structures, waterproofing of foundations and other structures with increased reliability requirements in all climatic regions. The element of Technoelast is the cold of the polar night and the constant pressure of technogenic groundwater. It is used where other materials are unlikely to provide the required level of protection against water. Technoelast is always where serious construction projects are implemented. It is where only the highest reliability is needed. Technoelast overview
Technoelast is intended for installation of roofing carpet of buildings and structures, waterproofing of foundations and other structures with increased reliability requirements in all climatic regions. The element of Technoelast is the cold of the polar night and the constant pressure of technogenic groundwater. It is used where other materials are unlikely to provide the required level of protection against water. Technoelast is always where serious construction projects are implemented. It is where only the highest reliability is needed. Technoelast is produced by applying a bitumen-polymer binder containing bitumen, SBS thermoplastic and fillers on a fiberglass or polyester base. Coarse-grained K, fine-grained dressing M and polymer film P are used as a protective layer. Technoelast is fused with a propane torch.
Features of Technoelast
Technoelast is biostable.
Application area
Designed for the device of the roofing carpet of buildings and structures and waterproofing of building structures.
Technoelast structure
Technoelast is obtained by double-sided application on a glass or polyester base of a bitumen-polymer binder consisting of bitumen, styrene-butadiene thermoplastic elastomer and a filler. Coarse and fine-grained dressing and polymer films are used as a protective layer.
Technoelst brands
Depending on the type of protective layers and the field of application, Technoelast is produced in the following grades:
TOWith coarse-grained dressing on the front side and polymer film or fine-grained dressing on the weld-on side of the web; used for the device of the upper layer of roofing carpet;
P
With fine-grained dressing or polymer film, or their combination on both sides of the canvas; It is used for the device of the lower layer of roofing and waterproofing of building structures (foundations, tunnels, etc.).
Technoelast Characteristics Table
| Parameter name | TO | P | |
| Coating type: | top | film | film |
| bottom | slate | film | |
| Weight, kg / sq.m. not less | 5.0 | 4.6 | |
| Breaking force in tension in longitudinal / transverse direction, N, not less | on polyester | 600/400 | 600/400 |
| on fiberglass | 800/900 | 800/900 | |
| on fiberglass | 294 | 294 | |
| Thickness, mm | 4.2 | 4 | |
| Water absorption for 24 hours,% by weight, no more | 1 | 1 | |
| Binder weight from the side to be welded, kg / sq.m., Not less | 2 | 2 | |
| Loss of dressing, g / sample, no more | 1 | ||
| Flexibility temperature on a bar R \u003d 25mm, оС, not higher | -25 | -25 | |
| Flexibility temperature on a bar R \u003d 10 mm, оС, not higher | -25 | -25 | |
| Brittleness temperature of binder, оС, not higher | -35 | -35 | |
| Waterproof for 72 hours at a pressure of not less than 0.001 MPa | absolute | ||
| Water resistance at a pressure not less than 0.2 MPa, for 2 hours | absolute | ||
| Length \\ width, m | 10x1 | 10x1 | |
| Heat resistance, ° С, not less | 100 | 100 |
Manufacturing jobs
according to the "Guidelines for the design and construction of roofs made of bitumen materials of the Corporation" TechnoNIKOL "", can be used in all climatic regions according to SNiP 23-01.
Technoelast from TechnoNICOL is always there, where large construction projects are implemented. It is produced by applying a bitumen-polymer binder to a base made of polyester, fiberglass or fiberglass. The material contains an SBS modifier; a coarse-grained dressing is applied to the upper layers of the material.
The composition and production technology provide the following material advantages:
- 100% waterproof
- high strength (15% more than other analogues)
- resistance to UV radiation
- universality of application
- speed and ease of installation
It is beneficial to use Technoelast for waterproofing. On average, it is 5 times more durable than other analogues. This guarantees the possibility of its use for waterproofing underground tanks, trunk systems, basement structures, etc.
How to place an order?
Buy Technoelast offers the Ant-Snab online store. We have presented various grades of material: EKP, EPP, TKP, HPP. All products have certificates of conformity and quality certificates. There are favorable offers when purchasing large quantities (wholesale).
To place an order, follow 5 simple steps:
- Select material grade
- Fill out the order form
- Select a method of payment and delivery in Moscow and the Moscow region
- Confirm order details to manager
- Get your stuff
Reading time ≈ 3 minutes
Technoelast is a weldable roofing material for arranging a flat roof, protecting building structures from the negative effects of water. It has high strength, elasticity: it retains flexibility at a temperature of minus 25 degrees, plasticity - at -40 degrees. Thanks to such properties, positive customer reviews, it is popular in different regions, but is widely used in the northern regions, areas with high ground pressure.
The basis of this material is fiberglass, fiberglass, polyester. A bitumen-polymer binder, coarse / fine dusting (red, green, gray) or a polymer film are applied to them.
Technoelast technical characteristics
Technical characteristics of technoelast grades: EKP, TKP, EPP, HPP:
The main varieties of technoelast
According to the scope of application of technoelast, the type of protective level, the following modifications are distinguished:
- Technoelast EPP - polyester-based material with a high-strength protective film. It is very sturdy and has a stretchable underlay. They are used for the lower layer of flexible roofing, its waterproofing, waterproofing of the floor, foundation, basement, utility rooms;
- E - polyester
- P - film
- P - film
- Technoelast EKP - polyester base with coarse-grained powder, a layer of polymer film. Due to its increased reliability, it is used for the upper level of a flat roof, shed roof, garage;
- E - polyester
- K - crumb
- P - film
- Technoelast HPP - fiberglass base with a protective polymer layer. They are used for waterproofing floors, basements, foundations, flat roofs, for vapor barrier, garage roofs, utility rooms, pipe insulation;
- X - canvas
- P - film
- P - film
- Technoelast TKP - the basis is fiberglass with a polymer film, coarse-grained dressing. Suitable for the upper level of flat roofs, garage roofs, summer cottages, sheds.
- T - fabric
- K - crumb
- P - film
By appointment, there are 2 groups:
- Technoelast K - for arranging the upper level of the roof. For its production, mainly shale dressing is used, which protects against solar ultraviolet radiation;
- Technoelast P - when installing the lower roof layer. Fine-grained dressing, protective film prevents material sticking.
Benefits
- durability - the material is designed to last 30 years;
- elasticity - retains plasticity during severe temperature fluctuations, it can lengthen, stretch, it is allowed to fuse it on building structures of various shapes;
- high quality - high quality bitumen is used for the manufacture;
- reliability - successfully resists mechanical, air, biological effects;
- the ability to use on any surfaces;
- technoelast has good waterproofing, excellent sound absorption and heat retention;
- ecological purity - does not have a harmful effect on nature, people;
- good adhesion - the artificial rubber in the composition provides strong adhesion to various surfaces;
- ease of installation, installation.
Technoelast TKP gray slate is a premium waterproofing roofing material with excellent performance characteristics. It is a fabric with a base of reinforced fiberglass, which is covered with a bitumen-polymer binder on both sides. The bituminous layer contains various additives and modifiers, which improves the properties of the material. To protect against mechanical stress, ultraviolet radiation and increase heat resistance, a coarse-grained gray shale dressing is applied to the upper side of Technoelast TKP. The lower part of the panel is protected by a polymer film with the manufacturer's logo.
Rolled roofing Technoelast TKP gray slate is produced by TechnoNIKOL. It has quality certificates and is highly reliable and durable. The material can be used as roofing and waterproofing of foundations, basements, bridge spans, swimming pools and other engineering structures. The service life is at least 25 - 30 years.
Advantages and features of Technoelasta TKP
Rolled waterproofing Technoelast has remarkable performance characteristics. It can be installed at any time of the year, even in winter down to -30 ° C.
The main advantages of the material:
- withstands heavy mechanical loads;
- absolute waterproofness;
- high heat resistance and biostability;
- large margin of safety and durability;
- resistance to decay and ultraviolet light;
- simplicity and high speed of laying;
- versatility - a wide scope of use;
- preservation of consumer properties in a wide temperature range.
It should be noted that the base price of Technoelast TKP gray shale will not be very low - it is at the average level among the welded materials of its class. However, its purchase justifies itself due to the long service life and lower costs for the operation of the roof. After all, the degree of material wear after five years of operation will be only 22%. And if you use it as the top layer of a roofing carpet, then the first leaks due to wear may appear no earlier than 18 years after installation.
Scope of application and installation features of rolled roofing Technoelast TKP
The material is distinguished by its high tensile strength and excellent waterproofing characteristics. It is recommended to use it for the installation of the top layer of a soft roof on concrete substrates or strong cement-sand screeds. Shale dressing on the outside of the roll reliably protects it from the negative influence of various factors: sunlight, precipitation, mechanical damage. It can also be used for repair work and for moisture protection of foundations, swimming pools, basements, tunnels and other structures with increased reliability requirements.
Technoelast is laid by fusion with a gas burner. The canvases are overlapped on a previously cleaned and primed base. By the way, the logo, which is applied to the protective film from the bottom side - to the deposited layer, serves as a kind of indicator during the installation process. When exposed to high temperatures, it changes color and indicates whether the cover bitumen is heated enough to ensure reliable fixation of the panels to the base.
The online store "Roof and Isolation" offers to buy Technoelast TKP gray slate at an economically justified and competitive price. A flexible system of discounts will allow our customers to purchase this popular material from the TechnoNICOL concern at an even more attractive price, even without leaving their office or home. Call, ask questions to managers or place an order directly on the website!
The main area of \u200b\u200bapplication of Technoelast TKP waterproofing is the arrangement of the upper layer of the roof covering. Also, quite often this material is used as a protective substrate for the lower layers of the roof.
Technoelast (waterproofing lining material for TKP marking) effectively protects the roofing carpet from mechanical damage and moisture penetration. It is actively used in conjunction with other bitumen-based polymer coatings.
The basis is made of fiberglass, impregnated with special modified SBS bitumen. The outer side has a protective layer of stone chips and slate in gray, blue, red or green.
Benefits of waterproofing
- Long service life - from 30 years and more. A non-decaying fiberglass base and modified SBS bitumen significantly extend the life of the roofing
- High strength providing resistance to mechanical damage
- Insensitivity to precipitation, temperature changes
- The cost pays off with unique characteristics:
- heat resistance - not less than + 100–120 ° С;
- bituminous layer flexibility temperature - up to -25 ° С;
- fragility of the bituminous layer - up to -35 ° С;
- breaking strength of waterproofing - 800-900 N (in the longitudinal and transverse directions).
- Environmentally friendly material for living quarters. Technoelast TKP complies with the established sanitary and hygienic standards.