DIY plexiglass lamp. Plexiglas table with LED lighting. Step-by-step instructions for creating local lighting

Plexiglas for backlighting is a beautiful and practical solution for home, apartment, office. Light is evenly distributed and refracted through the canvas.

Thus, a cozy atmosphere is created in the room.

The drawing on the wall looks organic, not only performing a decorative function, but also illuminating the space at any time of the day.

End lighting is used in interiors for several reasons. First, it looks unusual, creating a diffused light flux. Secondly, such a solution is practical: it is possible to organize high-quality backlighting that consumes a minimum of electricity. And the final argument is a combination of aesthetics and functionality.

Edge lighting is able to provide a pleasant atmosphere in the home

Illumination of canvases is used in tandem with the following designs:

• ceiling panels;
• false windows or framelights;
• kitchen apron panels;
• shelves;
• handrails of stairs, etc.

In fact, any idea can be realized.

: "Profile for end lighting"

This video will show you how to make a profile for an endlight.

Today, the design of end lighting in combination with a false window is popular. Framelight - a panel where a poster with an illustration is placed. Any landscape, photo or painting takes on a new look. In addition to the decorative function, the unique panel creates additional lighting.

The design is delivered ready-made, the user needs to insert a poster with the image. Often, an imitation of a view from a window, different landscapes, a photo is used as a picture.

The poster can be easily replaced at any time. The summer street can easily be replaced by an autumn park or winter forest. Framelights are convenient to use, as they are equipped with a click-profile.

As a result, the upper part is snapped off and the protective module is removed. The variant with the "Magnetic" design is also used. Its system uses magnets to secure the web.

With the help of a false window, you can simulate any view from the window that you want

Step-by-step instruction

Making glass for backlighting is within the power of any homeowner. On the features of the process in order:

1. We cut out a light panel of the required size and shape from plexiglass. For this we use a hacksaw, jigsaw, etc.
2. We process the edges, make a recess at the end for the LED components.
3. We apply the drawing on self-adhesive paper and glue it to the canvas.
4. Using a scalpel, cut out the outline.
5. With an electric drill, we engrave glass along the marked line.

: engraving on plexiglass with your own hands.

Now we need to assemble the circuit. We take the LEDs and solder them to their positive terminals via a resistor. We insulate the contacts with heat shrinkage. Using acrylic glue, we attach the LEDs to the end holes of the canvas. To check the health of the system, we connect the pros and cons along the veins, attach it to the battery holder.

The result is an excellent self-assembled night lamp.

You can make a beautiful plexiglass lamp if you follow the instructions

Materials and tools

Have you decided to do the edge lighting yourself? Make sure that everything you need is at hand:

• acrylic canvas;
• aluminum profile;
• lED Strip Light;
• small power supply for 12V.

If the panel is to be located in a room with high humidity, a special tape is needed. Considering a false window as an auxiliary light source? Then you need an LED strip with increased performance.

Of the tools, they usually use a hacksaw, an electric jigsaw, a drill, fasteners, etc.

To operate a plexiglass lamp, you need a 12V power supply

Acrylic preparation

It is important to provide uniform illumination of the panel. We need high quality acrylic. A balanced, rich glow is guaranteed by diffuse components.

They appear in acrylic sheets during special preparation. At home, such processing is impossible, so you need to purchase a ready-made canvas that meets all the parameters.

The thickness of the plexiglass is determined taking into account the dimensions of the light panel.

The ends in the acrylic sheet must be polished. In a piece where there are no LED components, we apply a reflective material. During production, acrylic is covered with a protective film. It prevents damage to the canvas, redistribution of light. Remove the film before installing the structure in the profile.

Profile assembly

Aluminum profile components are at your disposal. We cut them to the required size at an angle of 45 °. Then we connect the parts using corners.

Three sides are ready, now we install LED components throughout the inside. We connect the wires in advance to ensure contact with the power supply. The 12V adapter is capable of supplying energy to a tape up to 5 m long.

We screw at least 4 fasteners to the upper part of the profile for further wall mounting.

Aluminum profiles for false windows must be fixed at an angle of 95 °

Work with the light panel

The three sides of the profile are assembled and the LED components are fixed, we begin the installation of the light panel We need a reflector - a sheet that reflects light. We start it in profile.

We also add an acrylic sheet, a film with an image, a protective coating to the structure. Place the canvas over the LED components. This promotes good light diffusion.

At the end we attach the last side of the profile.

An important nuance: the poster must be printed on backlit film - this is how good light transmission is achieved. To make the structure more rigid, a backdrop with sufficient thickness is inserted into it.

Wall mounting

The lightbar is ready, now you need to secure it. Hooks are mounted to the wall using dowels. It remains to hang a false window and connect the power supply.

Using simple technologies, you will be able to arrange a modern design in any room on your own. Acrylic edge lighting will create an atmosphere of comfort, if necessary, perform a practical function.

Source: https://polikarbonat.guru/orgsteklo/orgsteklo-dlya-tortsevoj-podsvetki.html

Plexiglass engraving: process description

Laser engraving on plexiglass is the application of an inscription or drawing and is considered one of the most popular technologies today. Images obtained by engraving are interesting, attractive and unique.

Beautiful engraving on plexiglass

Laser technology makes it possible to inscribe even small and very fragile items. Today the new technology is capable of creating vector drawings, raster photographs in any resolution on the surface of plexiglass.

This element of decoration is used in advertising signs.

Engraving technology

Images on plexiglass will look different on artificial glass, it all depends on the technology with which the glass was produced.

If glass is made of plastic by casting, the engraving surface is soft, similar to velvet, but on the surface of extruded acrylic the image will be rough and grainy in structure.

By using the engraving depth and beam tilt, you can get quite different and delightful effects in your decoration. For example, images appear with shadows or images with a mirror image.

All this is successfully used when creating signs with three-dimensional letters or backlit plates.

Laser engraving process

Plexiglass engraving is always applied from the back of the acrylic plate, since it is more convenient to view the entire front side, where the carved image is obtained.

The process begins with removing the protective layer from the side of the surface on which the image is planned to be applied. On the front side, the engraver leaves the protective layer intact so as not to accidentally damage the surface.

The layer is removed from the workpiece material with a focused laser beam at the highest power.

This process is the reason for the appearance of the planned image; it is based on raster technology, when the laser beam burns not lines, but points.

The image on the surface is obtained by correct control of all parameters of the laser radiation. The quality of the image depends on the property of the substance in the material on which the drawing is applied.

On organic glass, engraving should take place at low power, but at high speed. The quality of the image depends on the power. For example, to create notches on the surface, you need to select a small power, if you increase it, the product may deform.

Hand engraved organic glass

Engraving can not always be carried out on a machine, if there is a special tool, then engraving can be done at home. For do-it-yourself engraving, you need an engraver machine.

Before starting the DIY engraving process, watch the video on the engraving machine. The process itself will be easier if you follow it in stages according to the instructions:

1. Prepare a sketch, if you do not have the talent of an artist, then look at the pictures in the photo, maybe this will help your imagination.
2. The prepared drawing will need to be copied onto the plexiglass surface. With this, everything is simple: plexiglass is placed on the image and a picture is drawn using a felt-tip pen.
3. Work on the device is carried out using a flexible shaft, it adjusts the cutting part of the mechanism.
4. The engraving is carried out by the cutting part of the nozzle, which can be different, depending on the pattern.
5. To make the process go well, you need to "rehearse" a little on the remains of plexiglass. Thus, you can choose the right attachment for your drawing.
6. Just as with machine engraving, you do not need to work at high power, you can damage the surface of the product.
7. The whole process boils down to the fact that the nozzle is drowned to the planned depth.
8. Of course, an experienced craftsman will be able to keep the nozzle at the same level, but a beginner will have to make a limiter using a plaster or electrical tape.
9. During the engraving process, dust will accumulate on the surface, you should not clean it with a rag, you can scratch the surface, so use a vacuum cleaner.

All decorative images obtained on glass can be decorated with edge lighting. Plexiglas for backlighting must be of considerable thickness. The design with LEDs is easy to make, you just need to connect the wires to the crossbars of the bracket, and fix it all on the back of the plexiglass.

Source: http://propolikarbonat.ru/gravirovka-na-orgstekle

DIY angel eyes. Plexiglas, LED strip

Each owner secretly dreams of improving the appearance of his iron horse. It's nice when the car looks more expensive than it really is.

Tuning headlights is one of the most common ways to change your appearance.

It is very popular to install glowing rings in the optical elements, popularly called do-it-yourself angel eyes.

There are three ways to get a fashion accessory:

• buy ready-to-install;
• made of transparent plexiglass and individual LEDs;
• make on the basis of LED strip.

We dismiss the first method right away - it's boring, and there is practically nothing to describe. But let's dwell on the rest.

Angel eyes based on plexiglass rings

In order to make glowing rings for headlights or foglights using the first method, we need:

• Bent plexiglass blank; transparent plexiglass rod;
• lEDs: 2 pcs. on the ring;
• resistors: one for each pair of LEDs;
• soldering iron and solder;
• wires;
• heat shrink insulating tube;
• construction hair dryer;
• cylinder suitable in diameter to the headlight reflectors;
• drill and drill;
• file;
• transparent glue.

A transparent bar can be purchased at a building supermarket - these are used in blinds. Any jar that matches the diameter of the reflector is suitable as a cylinder. If the headlights are not round, then the process of bending the bar will be more difficult - you will have to make a template of a complex shape yourself from the material at hand.

To begin with, the circumference of the future ring is measured. Then a piece of a bar of the required size is cut off, and holes for LEDs are drilled in its ends. The bar can now be bent.

To make the plexiglass soft, it is heated with a building hair dryer. To make a ring, the softened bar is wrapped around the template and waited until it becomes solid again.

Now you can install the LEDs in the pre-drilled grooves at the ends. You can fix it with transparent glue. It is dripped into the recess and the LED is inserted.

For better dispersion on the resulting product, it is necessary to make notches with a depth of 0.5 mm at equal distances (the easiest way is with a hacksaw blade or file). In order not to suffer with painstaking work, you can cut a thread on a still straight bar using a die of a suitable diameter.

Rings with two LEDs have significant disadvantages. First, they are open circuit. Secondly, they are not bright enough to be used as daytime running lights. Angel eyes made of LED strip are devoid of such disadvantages. To make them you will need:

• plexiglass sheet 5-7 mm thick;
• a cloth from a hacksaw for metal;
• devices for cutting out round holes of large diameter (ballerina);
• tape with a large number of LEDs per meter of length;
• scattering film;
• transparent glue;
• heat-resistant adhesive tape. Aluminum;
• soldering iron, solder;
• wires with terminals;
• heat-shrink tubing.

To begin with, mark future rings on a sheet of plexiglass. Then they are cut out, first along the outer diameter. They should be cut only with a hand jigsaw or a ballerina. If you use a jigsaw, the plexiglass will melt at the cut.

The resulting circle is checked in place on the headlamp, if necessary, the size is corrected. After checking, you can cut out the inside.

For a better glow from the outside, the rings are pasted over with a special diffusing film. If it is not there, then you can make notches with a hacksaw blade or simply wrap it with fine sandpaper.

Now you can install the ribbon. Before gluing, you need to carefully attach small cubes - six pieces will be enough - made of plexiglass between the LEDs so that the distance between the diodes and the ring surface is about two mm. The tape is attached to the finished ring by gluing these cubes.

Before fixing the tape on the rings, you need to solder the wires to it and fill the soldering points with silicone sealant.

The finished rings can already be tested by connecting them to a 12 volt power source.

Power connection

Ready-made angel eyes are usually connected to the power supply of the car's side lights.

This is the simplest and most effective way, since you do not need to lay additional wiring and make a separate switch.

It is imperative to observe the polarity - unlike a conventional incandescent foot, you cannot connect an LED at random. If you confuse plus and minus, it will not burn.

It is required to carefully drill a small hole in the reflector of the headlight or fog lamp, only so that the wires pass through it. After the final installation of the ring and the assembly of the headlight, it will need to be filled with sealant.

The power supply of the tape is connected to the on-board network using standard wiring to the side lights, observing the polarity.

In a similar way, you can make and install angel eyes with your own hands, not only in the headlights of a car. Fog lights can also be decorated with LED rings. The headlights of motorcycles and scooters will also look great if you install your own LED lights in them.

Source: http://AutoLirika.ru/tuning/angelskie-glazki-svoimi-rukami.html

How to make an LED advertising sign?

LED sign advertising is the best way to attract customers or future buyers, as well as ordinary passers-by. At the moment, so-called lightboxes or volumetric inscriptions are used. Success will be achieved by following three rules:

1. The quality of the construction must be high.
2. The design should stand out from the gray mass.
3. The backlight is made from bright, colorful LEDs.

A lightbox is often a rectangular design with built-in lighting inside. Such signs are used everywhere. This DIY ad is very effective. Illuminated boxes have different shapes, heights and widths, but they are classified according to their design features:

1. One-sided.
2. Bilateral.

1. Indoor advertising.
2. Outdoor advertising.

Front part of the box

Translucent banners are the cheapest, but require a more expensive tensioning system or have to use a rigid structure.

The most commonly used material is milky acrylic. Its main property is the diffusion of light, thereby visually making the backlight even.

DIY illuminated sign

An alternative to acrylic is polystyrene. It is used because of its cheapness, but it is more fragile and susceptible to environmental influences.

Drawing an image on a box

On the front of the box, a film or application of vinyl films is applied. Printing on film is outdated for a long time, as it quickly fades in the sun and loses its ink.

The same cannot be said about vinyl applique. It is much more colorful, more practical and almost does not deteriorate.

There is, of course, a drawback - it is very expensive, and installation requires certain knowledge.

Side surface of the box

If we are talking about a small box, then you can use aluminum or plastic as a profile. This part comes in completely different sizes and shapes. But it is best to make boxes no wider than 180 mm, since lighting costs will increase significantly.

Back of the box

The best choice for the rear is galvanized steel as it is non-corrosive and very durable. It is also important that it has a low cost. Also, the back part can be made of other opaque materials - plastic, composite panel.

Box illumination

To illuminate the box, fluorescent lamps are often used. They are very cheap and practical, at the same time they give out a good luminous flux, but they get very hot. They were replaced by LED strips, since they are better in all respects.

Neon sign glows brightly at night

Neon lamps are used to illuminate curly signs.

Box making

Probably every man dreamed of making a glowing sign with his own hands. And each asked a question - how to do it? Let's consider this process in stages.

1. On a computer, you need to make a layout of the future product 1: 1. There is a special program - Corel Draw.
2. Then we cut out the resulting image using a plotter.
3. Now you need to apply the mounting tape from the center to the edges and cut off the excess.
4. Then you need to cut out the aluminum profile and do not forget to take into account the length of the lamps.
5. We mount the third part of the box (only the profile and corners).
6. Now you need to make the back cover and insert it into the box.
7. It's time to prepare the right tool for installation.
8. We make lamp holders. They are attached to the back of the box with self-tapping screws.
9. Next, we mount the lamps to the holders and connect the wiring. Then it needs to be isolated.

When using LED strips, the task is simplified to a minimum, since installation is extremely simple. You need to remove the protective film and properly attach the tape to the panel.

1. After that, the front part should be cut out of plexiglass and processed from burrs.
2. After removing the protective film, you can start placing the text.
3. We drill holes for moisture drainage in the bottom shelf.

Based on the above, you can also make a neon sign and glowing signs.

It turns out that you can make a wonderful billboard or sign on your own. You just need to choose the right material and lighting device. At the moment, it is best to use LED strips.

Source: https://LampaGid.ru/osveshchenie/proizvodstvo/svetodiodnaya-vyveska

How to make a beautiful backlighting of glass shelves from LED strip with your own hands

Glass is one of the most common home furnishings. A variety of shelves are made of glass today, both in cabinets and in a separate form, as well as doors for a headset.

Wall-mounted glass shelves already have an excellent appearance in the interior.

But LED lighting, which can be easily installed on such shelves with your own hands, will help them to play with unique colors.

But in order for the wall shelves to sparkle in the interior, you need to know both the features of glass products and the stages of installing the LED strip. Our today's article will tell you how to make LED backlighting with your own hands.

Features of glass shelves

In the modern interior, glassware has become an integral part of the interior decoration of a house or apartment. The following products are made of glass today, which are especially popular among the population:

• wall shelves;
• whatnots;
• glass sections of cabinets;
• regular shelves.

Note! Glass is also often used as an element of interior doors, lighting fixtures (wall or ceiling lamps), and also as a variety of decorative elements in the interior.

Glass in the interior

The use of glass elements is allowed in almost all households.

But the use of LED backlighting for such glass products will allow you to achieve the following positive points:

• visual expansion of the space of the room. This design solution is relevant for small spaces. It allows you to look at the room in a completely different way;
• allows you to make the room brighter;
• gives the room sophistication and originality, as well as airiness and festive atmosphere;

Lighting on glass shelves to create the right atmosphere

• creates local and decorative lighting in the room;
• allows you to visually delimit the space;
• makes it possible to create a certain atmosphere in any room of the house.

It is worth noting that LED lighting, due to a number of its features, especially when using an LED strip, makes it possible for absolutely anyone to make such a lighting with their own hands.

Features of creating local lighting

Illumination of glass products (for example, shelves) using an LED strip has a lot of advantages, among which the following points should be highlighted:

• suitable for lighting any shelves;
• each shelf can be equipped with a tape of a different color, which will add color to any interior;

Multi-colored backlight

• led can be installed on any surface, including glass;
• simple installation, which is easily done by hand;
• illumination, when used simultaneously with the multi-color LED strip (RGB-products) of the controller, can be multi-colored and controlled by the remote control.

Note! Today, all rainbow colors and shades are available for LED lighting. To do this, you need to connect a controller to the operation of the LED strip with your own hands. Such illumination of the shelves in the interior will have a particularly attractive appearance.

Using a controller in the circuit will allow you to perform the following manipulations:

• change the colors of the backlight glow;
• change the brightness of the glow;
• add shimmer.

Such modes will allow you to create the most suitable atmosphere in the evening and will bring brightness and colors to your life. At the same time, the most effective glow of the LED strip will be typical for glass shelves.

Lighting shelves with flowers

Especially useful and effective will be the lighting of those glass shelves on which the flower pots are placed. For them, additional lighting, especially for tropical varieties, will be very useful, as it is an integral part of successful plant cultivation at home.

Variants and methods of installing local lighting

End light

There are several ways to make your own lighting with led for glass shelves. Glass wall shelves can be illuminated in the following ways:

• end lighting. In order to create such illumination of the shelf, led must be installed on the back of the shelf support. Fastening to the plane of the shelf support is allowed. As a result of this arrangement of the lighting device, the light is uniform;

• classic or traditional lighting. Here the wall shelves will be illuminated from below or from above.

Note! Whichever method you choose to mount led with your own hands on a glass shelf, the light from it should not shine into your eyes.

Traditional shelf lighting

Very often glass wall shelves are made of frosted glass instead of transparent glass. If there are matte shelves in the interior, the led can be placed using any of the above methods.

Step-by-step instructions for creating local lighting

You can install LED lighting on wall shelves in several stages:

• connecting the product to circuit components;
• installation on the shelf surface.

Let's consider each stage in more detail.

Connecting circuit components

Before proceeding with the installation of led, it must be said that this is a low-voltage product. Therefore, in order for it to work from a standard 220 volt power supply, you need to connect a power supply unit of the appropriate power to it. The diagram for connecting the product to such a converter is shown below.

Diagram of connecting the tape to the power supply

In addition to the power supply, a controller can be connected to this circuit (when using multi-color products). Its connection is carried out as follows.

Connection diagram of the tape with the controller

The main thing here is to connect the wires correctly, observing their polarity. If this is not done, the backlight will not work.

Placing a light source on the surface of products

Very often, a special anodized aluminum profile is used to illuminate glass shelves with led.

Anodized aluminum profile

This profile is inserted into the glass. The best solution would be to use a profile with a width of 8 mm. At the same time, the light source itself will remain invisible, which is the main requirement for this kind of work.

Note! Using a special profile will help create the effect of light bouncing off the edges of the shelves.

When installing a profile, work is carried out according to the following algorithm:

• first you need to cut the profile to the length of the shelf;
• all protrusions should be removed from the cut section of the profile. Otherwise, further installation of the light source will be carried out with significant difficulties;
• after that, we drill holes in the profile for its fastening;
• the profile can be attached to the glass surface using plastic dowels and self-tapping screws.

Note! When attaching the profile, its evenness must be checked using a level. Otherwise, the lighting will look crooked in the interior.

If the profile has open ends, then it will be quite easy to install led in it.

Tape inserted into the profile

In addition, you should know that since the LED strip itself is equipped with a self-adhesive surface, its installation on the surface of the glass shelf can be carried out without a special profile.

But, in such a situation, the luminous flux emitted by the light source can hit the eyes. To avoid this, a decorative applique can be glued on top of the edges of the shelves.

Installation of led without a profile is carried out as follows:

• the surface on which the product will be attached should be well cleaned of dust and dirt, as well as degreased. For this, it is best to use cleaners specially formulated for glass surfaces;
• after that, carefully remove the strip from the base of the product that protects the self-adhesive layer from pollution;
• install led on the underside of the shelf. Moreover, we only lightly attach it to the surface in order to be able to adjust its position if necessary;
• after that, when you are sure that the tape is placed correctly, press it firmly.

Installed backlight

Now it remains only to mask the wires and elements of the electrical circuit, after which the illumination of the glass shelves will be completed.

Conclusion

It takes a minimum of materials and time to create LED lighting for glass shelves with your own hands. Such work will be within the power of everyone who wants to decorate the interior of their home with such unusual decorative local lighting.

On sale now you can find not so many options for original lamps. And if they are, then they are not at all what we would like. However, it’s not so difficult, with a little imagination, to bring some great ideas to life and let even more light into your room.

Of course, we didn’t invent, but we figured out how to make them original items for interior decoration. We would like to bring to your attention three completely different ideas - plexiglass lamps.

What is plexiglass?

Plexiglas is a very convenient material for processing at home. It can be sawed with a table saw, or drilled with conventional drills. When cutting, choose a medium speed: if you cut at too high a speed, the plexiglass can melt from overheating. You can buy plexiglass at almost any building materials store.

A glass-like material made from acrylic, polystyrene or polycarbonate. Polystyrene is intended exclusively for indoor use, it is not resistant to UV radiation or atmospheric precipitation (for example, snow pellets). Withstands temperatures from -20 to + 60 ° C. Polycarbonate is resistant to ultraviolet radiation, tolerates significant temperature drops (from -40 to + 120 ° C) very well, and can be used outdoors. It is not afraid of high temperatures and can be used for cladding heating devices.

Acrylic glass is similar in properties to polycarbonate, it can withstand temperatures from -20 to + 70 ° C. You will need sanding paper and a sanding block to get perfectly flat edges or sand down scratches.

We make original lamps with the correct shapes

And now a few words about the manufacture of such a lamp:

	1. When cutting plexiglass using a circular saw, the cutting blade is set with a minimum overhang under the thickness of the material. When cutting, the pendulum stroke control should be at the "zero" mark
	2. The transparent plexiglass is easy to paint. The choice of clear color varnish or waterproof paint - we leave it to your taste
	3. The effect of a soft transition of lines occurs when you apply an ordinary colored varnish on an acrylic basis, smoothly brushing over the plexiglass parts. Do not touch the varnished surface with your hands, even if it is dry
	4. Clamps for fastening. Both ordinary plastic or wooden clothespins and special carpentry clamps are suitable.

In building materials stores, you can purchase multi-colored sheets of plexiglass and immediately cut into parts of the required shape and size. You can buy standard plexiglass sheets and cut them yourself. In any case, additional grinding of the edges is required. Use sanding paper and a sanding block for this.

To suspend each luminaire, screw two hook screws into the wall and hang it on them. To prevent the luminaire from tilting towards the wall, a distance block must be attached to its back using double-sided adhesive tape. That's all.

	1. Plexiglass sheets cut into square-shaped parts are pasted over from the back side with a matte or satin film through which soft light seeps through
	2. To prevent the plexiglass sheet from bursting or cracking when drilling holes, it is necessary to put plywood on both sides. The top sheet of plywood, which is the same size as the plexiglass sheet, will also serve as a template for drilling
	3. The edges of the painted surfaces must be pasted over with masking tape, which is removed after painting.
	4. In addition to small S-shaped hooks, you will also need a lamp with a fluorescent lamp.

Backlit Vacation Photos

Only you have such wonderful photos! Why not use them for interior decoration. Of course, it can be not only some beautiful landscapes or streets of old cities. When implementing this idea, you can use both children's photographs and photographs depicting, for example, family celebrations, sports successes.

This lamp will be a wonderful gift for your friends and family. For example, what could be better than a beautiful grandchild photo for grandparents! You will probably agree that in this case your imagination is not limited by anything.

	1. Print your favorite photos on special printer paper. Do not use too thick paper for this, as it will not transmit enough light
	2. Use the drilling template and drill the holes. Then cut out pictures of the required format and fix them on a colorless transparent film.
	3. First, attach a sheet of plexiglass to the luminaire frame, then a film with a photograph, then another sheet of plexiglass. Firmly fasten all elements with screws, then cut off the protruding edges of the film
	4. Such interesting lamps are available in different colors.

It seems that no matter the number of lamps and fixtures in the room, the corners on the ceiling always remain dark. This fact did not give me rest during the renovation in one of the rooms. After a quick look at the pictures on the Internet, I realized that my favorite was Peter Bristol's designer corner lamp ( Peter bristol). It was made for Established & Sons and cost a whopping $ 900!

After searching a little more, I found attempts to make a similar lamp on my own, but the information was not complete, without any instructions.
I decided to take matters into my own hands and make my own corner lamp.

This lamp consists of 3 main components: a plywood triangular frame, an inexpensive lamp with a cord, and a piece of clear acrylic (plexiglass). This lamp is easy to make, although it will take some skill. You will need a hand held power tool, and if you have a table saw, this will make everything much easier.

Ready? Let's make it!

Step 1: drawing the triangle

You need to draw an equilateral triangle on a piece of plywood. As you can see in the photo, I used a digital protractor, but this can be done using a regular protractor (each angle should be 60 °).
The size of the triangle should be large enough to fit the lamp with the base.
I have 61cm each side of the triangle.

After I drew the triangles, I drew another one with an inward indent of 2 cm (inner contour).

Step 2: cut along the outer office

Using the outer contour as a guide, cut a triangle out of the plywood. I made 45 ° cuts with a table saw. You can do exactly the same with a hand-held power tool, although it will take more time and the quality of the cut will suffer, you will have to modify it with a file.

Step 3: cut with a jigsaw

At this point, you need to remove the inner section of the triangle.

Use a large diameter drill bit to make the entry holes for the jigsaw. I drilled holes near each corner.

Use one of the drilled holes to start cutting. Saw as close to the pencil line as possible until you reach the next hole. Then repeat the same for the other 2 sides of the triangle.

Step 4: remove the inner corners

Step 5: mounting holes

To fix the corner lamp frame to the wall, you need to prepare the mounting holes.

I found some long screws and fitted a drill to match their diameter. The frame was fixed with the beveled side down, as it would be on the wall and drilled holes (outside).

I made a countersink so that the screw heads would hide in the frame during installation.

Step 6: clear acrylic

A piece of clear acrylic was used to hide the light bulb and diffuse the light. Why didn't I use milk acrylic, you ask? The fact is that its surface will be glossy and it will be "too" not transparent, but it's a matter of taste.
We cut a triangle out of acrylic so that it fits on the frame by 10-15mm from all sides.

The plexiglass you find will most likely be covered with a protective film, which must be removed. Don't be afraid to scratch the acrylic. In the next step, it will become clear why.

Step 7: sanding the acrylic

In order to diffuse light, transparent acrylic must be made matte. I used a sander with 120 sandpaper (you can sand it with your hands). Evenly processed plexiglass on both sides.

Finished with 180 sandpaper.

Step 8: attaching the magnets

To fix the plexiglass to the wooden frame and make it removable, because sometimes you have to change the lamp, I used 5mmx1.5mm neodymium magnets (they are much stronger than ordinary ones).

Lay the acrylic on the frame as it needs to be placed. Make small corner marks on the frame, along the side of the acrylic.

Then make a NOT through hole in the acrylic to prepare the magnet holder. The hole diameter is slightly larger than that of the magnet.

Use instant glue or epoxy to glue the magnets into place on the acrylic.

Step 9: counterpart

To give the magnets something to grip on, I screwed in metal flat head screws.

To do this, I put our piece of acrylic on the frame and marked the locations for the magnets on the frame. To make the plexiglass fit snugly against the frame, I made holes so that the screw head will be hidden in the frame.

Tighten the screws gently as the light frame is quite delicate.

Step 10: electrical

Before you mount the luminaire to the wall, prepare a cavity for the power cord at the back of the frame. I used a decorative fabric braid cable. I found it pretty cute and was cheap at the local store.

Mark where the cord will go, then carefully cut the cavity with any tool you like.

Step 11: fix the frame to the wall

Position the frame so that all sides are snug against the walls. The design of the luminaire is such that it fits into the corner only in a certain way, so that you will not confuse anything.

The lamp holder must also be attached to the wall as it will hold the weight of the cord. Since we have a small enclosed space in the corner on the ceiling, it is preferable to use an LED lamp rather than an incandescent lamp.

Step 12: Enjoy!

With the help of magnets, acrylic will practically snap into place by itself.
When you turn on the lamp, the corners will be beautifully highlighted!

P.S. I made two of these lamps, one with a red cord and the other with a white one. I thought that white would stand out less against the background of the wall. In the end, I liked more that the red cord stands out on the wall.

Plexiglas has recently found wide application in various branches of life. Partitions in offices, advertising products, aquariums and other decorative items are made from it. It is easy to work with this material at home. You can buy it in any trade department of building materials.

Good lighting in the home plays an important role in any design decision. An original decoration of your apartment can be a lamp made of plexiglass with your own hands. A little imagination, perseverance - and your room will sparkle with new colors.

How to make an original lamp yourself?

If you have decided on the idea of \u200b\u200bmanufacturing, then it's time to get to work. The product requires a container made of organic glass. You will need tools: circular saw, scissors, pencil. Stock up on copy paper, stencil, paint. You also need a socket and a wire with a switch.

Expert opinion

Ivan Zaitsev

Lighting specialist, consultant in the building materials department of a large chain of stores

Ask an expert

You can buy a stencil, or you can make it yourself. There are a lot of different options on the network, you should choose the one you like and print. You need to copy the stencil onto vinyl paper using carbon paper. Cut the stencil according to the applied pattern, remove the protective film and glue it to the plexiglass. Bonding requires care, the surface must be clean and dry.

The next stage in the work is painting the plexiglass. It is better to apply paint from a spray: layer by layer. The number of layers is determined visually, depending on the quality of the application. It is better to choose the paint to match the home interior.

The paint should dry well, a day is enough. Remove the stencil carefully, without scratching the painted surface. It is possible to use plexiglass as a material for the lamp, which can be both transparent and of various colors. Then painting at home is not required.

It remains to connect the socket and the wire with the switch, check how the lamp works.

A table lamp or floor lamp, in addition to decorating with a stencil, can also be decorated with photographs. Beautiful landscapes, city streets will create a unique look of the product. And children's photos, family vacations and celebrations will remind of happy moments. Such a plexiglass lamp will not leave anyone indifferent. And how nice it is to receive it as a gift! Photos of friends, parents, grandchildren with grandparents - whatever you want!

Little tricks in making

• Favorite photos must be printed on a printer using special paper. The paper should not be very thick, as it should transmit enough light.
• Cut out the resulting images and fix them on a transparent film.
• Attach a cut-out sheet of organic glass to the lamp frame, fix a film with a photo on it, then put another plexiglass on top.
• Fasten all elements with screws, cut off the protruding edges of the film.

In addition to floor and table lamps, you can also make a ceiling chandelier with your own hands. In addition, you just need to provide special fasteners. For decoration, a decorative thread is suitable, preferably linen. Choose the appropriate color to match the luminaire or interior. It will look original in weaving.

Plexiglas for lighting fixtures can be purchased at building materials stores. It is convenient to handle it at home. The material is easily cut with a circular saw. It is better to cut at medium speed, so as not to melt from overheating. You can drill it with ordinary drills. It is recommended to put plywood under the glass when drilling to prevent cracking.

In the absence of the necessary tool at home, you can cut it in the store into the necessary parts in shape and size.

The DIY light source is ready. It remains to admire the results of the work. The original decor product will not leave anyone indifferent.

Hello to all brainworms... In today's project we will do it ourselves 3D lamp.

For this project you will need:

- Wooden board with a thickness of 6.5 mm
- 6.5mm thick acrylic plate
- LED strip length 10 cm
- Battery
- Soldering iron
- Switch
- Solder
- Glue

Step 1: laser cutting

Start by laser cutting your workpieces.
We used the FSL Hobby Laser.

The "base" file has two parts. This allows solid and hollow parts to be stacked on top of each other. Cut along the red line and engrave along the blue line. Only one part will require a blue line to engrave.

Use 6.5mm material, cut through the row 8 times. This will give you 8 solid pieces and 8 hollow pieces. Keep one of the centers of the "hollow" part. This will close the base and act as a guide for installing the LEDs.

For the acrylic plate, engrave the black sections. Cut along the red line.

Step 2: gluing

Stack the slotted pieces on top of each other to create a one-piece design. The slots will fit snugly for the acrylic plate. Use an acrylic plate to make sure all slots are aligned while gluing. If you plan to make the lamp interchangeable, then be careful not to glue the acrylic plate onto the seat.

Once all the solid pieces are in place, start peeling off the discs to make a hollow cylinder. Glue this cylinder underneath the slotted parts. This will create a recess for the electronic components.

Step 3: Wiring

Make the circuit according to the attached diagram. We used a 9V battery and two sections of 12V LED strips. Other combinations are possible, but this will require recalculating some circuit components.

Attach your LED strip to one additional piece of "hollow" circles. Align the circle with the engraved rectangle to align with the base of the acrylic plate. Attach the battery and wires to the base. When using a breaker, you can drill a section of the base to install the breaker so that it is accessible from the outside.

Step 4: Completion

Sand the base to smooth out uneven surfaces. Varnish or paint if desired.
Insert the acrylic plate into the stand. Add the bottom circle with electronic components to the base.

Step 5: glow

The video of laser cutting is shown below

Good luck with your projects!