Wallpaper silk-screen printing how to glue. We save the family budget: how to glue wallpaper silk-screen printing independently. How to glue wallpaper in hard to reach places

Silk screen wallpaper is a common trend in the interior of modern apartments. They are chosen both for living rooms and for walk-through rooms (hallways and front). Silkscreen printing is referred to as vinyl wallpaper and put on one of the highest levels in terms of quality of properties and variety of drawings. A distinctive feature of their appearance is an iridescent silky luster on the surface, emitting silk fabric or its patterns.

Silk-screen wallpaper is one of the highest quality materials for wall decoration.

Gluing wallpaper silk-screen printing is not particularly difficult. But it is worth considering some of the nuances of the manufacturer in order to perform the work of gluing in a quality manner and without misses. Because it will no longer be possible to remake the incorrectly pasted canvas.

Quality mark of silk on the walls

Silk screen wallpaper is known for its high price compared to other types of wallpaper coatings. This is due to the fact that they are produced in an expensive way of applying a hot stamping pattern on paper. It is the squeezed vinyl on the top layer of wallpaper that creates the effect of the applied silk. However, some manufacturers save on production processes and apply a top coat artisanally and roughly, due to which the latter loses its elasticity. Such poor-quality products when glued to the walls will be poorly moistened.

If you glue the wallpaper with unfairly made vinyl silk-screen printing, then when applying glue, their edges will turn out, preventing good adhesion to the walls.

If you glue silk-screen printing with a qualitatively made top layer, then both he and the paper base of the wallpaper will equally show their adhesive properties.
As mentioned above, silk-screen printing wallpapers are classified as vinyl, which are based on vinyl paper. During the production process, it is painted, heated and passes the embossing stage. Due to this, the paper at the output is the thinnest, but very strong. However, even thin silk vinyl wallpapers come in different thicknesses of vinyl.

Back to the table of contents

Properties and advantages of silk screen printing

Despite its high price, silk vinyl fully justifies it. Thanks to the qualities of vinyl, you can not only professionally decorate your home, but also enjoy working with it. After all, it is not for nothing that people say that if you need to check a person, you can paste wallpaper with him. So, silk screen printing has the following properties:
lack of smell and substances hazardous to health;

has a long service life (up to 15 years);

easy to wash, wet and dry clean, maintaining the original appearance;

resistant to light, therefore, does not fade in the sun;

has a huge number of different variations of drawings, ornaments and patterns;

easily combined in the interior with other types of paper wallpaper and various drawings, if required by the design idea.

If you have a question about how to properly wallpaper, then know that the next step in the process is working with silkscreen printing. Professionals advise to start gluing the walls from the window opening to the left and further along the entire perimeter of the room. This also applies to screen printing.

Thus, in the sunlight pouring from the window, the seams-joints of wallpaper sheets will not stand out. Due to this, the glued room looks neat, creating the effect of printed material on the walls.

Back to the table of contents

Preparing the walls for gluing

Silk vinyl is glued exclusively to smooth walls. If we are talking about previously aligned wall blocks, then you can start silk-screening wallpapering without first preparing the walls. However, if they require elaboration, then the following inventory will be needed:

putty for walls (start and end);

spatulas;

sandpaper;

primer.

The wall is completely freed from old wallpaper, dirt, mold and dust. All surface irregularities are worked out by starting putty. Using a spatula, neat brush strokes with a layer of 3 mm smooth out all the flaws of the walls. The result is fixed with a final putty, which is applied similarly to the starting one. The finished walls dry during the day, and then polished with sandpaper. The soil layer is applied at the end of the grinding process. Such manipulations will improve the adhesion of silk-screen printing to the walls.

It is very important to work out all the irregularities on the surface of the walls, since unplotted places will stand out strongly through the glued wallpaper.

Screen printing is a very beautiful option for decorating a room. Wall-paper combines a certain highlight of luxury and gloss. In addition, the material has gorgeous durability options. Probably for this reason, many modern designers are trying to use screen printing in the arrangement of modern apartments and houses.

The material is quite refined and beautiful, but has a number of features, therefore, it is very important to correctly carry out all the gluing processes. You can use the query - how to paste silk-screen printing wallpapers and find many interesting answers, or you can use our recommendations and make the process of pasting simple, fast and high-quality.

To get a qualitative effect, you need to do this:

We dismantle the old coating;
We clean the walls of dust and debris;
We make the process of wall restoration - we eliminate cracks and crevices;
Primed surface;
Use a deep penetration primer;
We make the gluing process

In principle, there is nothing complicated, but at the same time, if you have a question how to paste silk-screen printing wallpapers, you should immediately note that in this matter, the most important thing is to properly prepare the surface.

To complete all the work quickly and correctly, you will need certain tools:

roller;
brush;
dry, clean cloth;
bucket;
putty knife;
pencil and centimeter;
level;
scissors.

All these tools are the indisputable basis for the pasting process. They are inexpensive, but are necessary, they should be purchased in advance.

So we come to the answer to the question of how to paste silk-screen wallpaper. We begin the preparation process.

Dismantling of the old coating is carried out in a well-ventilated area. If the wallpaper is poorly removed, use a spray gun, apply warm water to the surface and after 10 minutes the wallpaper will be perfectly removed.
We begin the process of cleaning the surface. In this case, use a damp sponge to remove dust deposits on the walls.
Now carefully inspect the walls. If there are cracks, they need to be expanded and eliminated. We recommend that you use Portland cement-based dry mixes. Such mixtures are supplemented with mineral additives, plasticizers and modifiers, which allows you to get the perfect result.
Remember that the wall should be perfectly flat. Therefore, we use putty for leveling.
When the putty has dried, we proceed to the priming process, in this case, you will need a material that is used exclusively for silkscreen printing. After again, primer the surface with penetrating materials.

That's all, the surface is prepared, it remains only to cut and begin the process of pasting.

Before starting work, it is best to ventilate the room well, but you need to glue the wallpaper indoors.

Be sure to buy a quality glue that is created specifically for this type of wallpaper.

Before application, the adhesive is prepared in 15 minutes.

Apply glue to the wallpaper 15 minutes before pasting, so that it deeply impregnates the material.

Also, the adhesive is applied to the walls, a sufficiently thick and thick layer.

Wallpaper should be cut before pasting. Immediately make all necessary measurements and cut the material into convenient strips. To do this, use a centimeter, knife and scissors.

All tools must be ready in advance. Floors are best covered with plastic wrap so as not to cover up. In principle, that’s all, we glue the wallpaper in the traditional way.

Silkscreen wallpaper is a common decoration material. Silk screen printing belongs to the class, characterized by high quality, a variety of colors and patterns. Compared to other wallpapers, the price of silk-screen printing is quite high.

Preparation of walls for pasting by silk-screen printing

It’s possible to glue wallpaper with silk-screen printing only on smooth and well-prepared walls. If a walls require preparation, then for this you need a set of tools and materials:

spatulas;
putty mixes (starting, finishing);
deep penetration primers;
fine sandpaper.

The surface of the walls is cleaned of dirty deposits, grease stains, mold, fragile exfoliating fragments, old wallpaper and putty. The wall is primed then a putty layer of the starting putty is applied with a spatula, when it dries, it is cleaned from sand with roughness and primed again. After drying, the primer is applied with a thin layer of finishing putty. After drying, cleaning with fine sandpaper is done and dust is removed. After sequentially carrying out the above operations, the wall surface is ready for silk-screening.

How to glue silk-screen printing wallpaper

Before gluing the wallpaper silk screen, the walls of the room are measured for vertical and horizontal deviations. In the room, on the advice of professionals, the start strip of wallpaper is glued to the left of the window. With the help of a plumb line, a vertical line is drawn, which serves as a kind of standard by which the canvas is leveled. Subsequent strips of wallpaper are glued further counterclockwise. When wallpapering silk-screen printing it is very important to prevent drafts, the room closes doors, windows.

The process of wallpapering will require the preparation and availability of such materials:

ruler or tape measure;
Wallpaper glue especially for heavy wallpaper or screen printing;
scissors;
pencil;
brush;
pieces of clean and dry cloth;

rubber roller.

How to start the process of gluing the first strip of wallpaper silk-screen printing

Follow the instructions for wallpapering the walls, if they are attached to the rolls. and its preparation for work guarantee half the success in the process of pasting silk-screened walls of the room. A roll of wallpaper is rolled out on a clean, dry and even surface, usually on the floor. The height of the wall measures the length of the first sheet and cuts off with a margin along the upper and lower edges and spreads with prepared glue. Screen printing glue is distributed evenly over the entire length of the cut wallpaper and left for 10 minutes to soak. The surface of the wall is also covered with a thin layer of glue.

The prepared segment of wallpaper is applied to the wall and from top to bottom, a leisurely pressing of the canvas begins and its smoothing, taking into account the drawn vertical line, it will help to stick the wallpaper evenly. Smoothing movements are performed from the center to the edges, and a rubber roller will help to “expel” air bubbles and even out folds. Try not to tear the wallpaper. Stripes of wallpaper are glued only end-to-end, overlapping wallpaper will visually be visible, which will spoil the entire interior. In the process of gluing silk-screen printing, it is very important to combine the strips and prevent them from sprawling. Actively, but carefully work with a rubber roller for a good joining of strips.

How to glue wallpaper silk-screen printing in difficult and inaccessible places

The space behind the heating radiators is better to simply paint in the tone of the wallpaper or to cover with a heat-reflecting screen. It’s impractical, inconvenient and expensive to glue wallpaper on silk-screen printing in these places, all the more so under the influence of high temperatures they will fall off, and it will not be easy to plaster the wall in such an inaccessible place. The ideal wall surface behind the batteries can be prepared only by removing the heaters and then sticking the wallpaper, only after that it will be necessary to put the batteries in place, which is very troublesome.

In the corners of the room, the wallpaper is glued so that the strip comes on two walls.

Wallpaper pattern should be carefully adjusted when pasting. The joints of the wallpaper should not be visible. Work is done with clean hands.

Each subsequent sheet of wallpaper is glued according to the described technology. When the wallpaper is almost dry, you need to carefully trim the excess that protrudes to the ceiling and floor.

How to glue wallpaper silk-screen printing to get a single complete picture? Hurry should not be. Careful adjustment of patterns, strips are joined very tightly, there should be no traces of glue on the surface.

If you want to do the repair yourself, then cheaper and more beautifully designed walls can be wallpaper. Today you can buy any product you want, but it is best to choose a wallpaper made by silk-screen printing. In addition, before buying you will need to learn how to glue such wallpapers.

Silk-screen wallpapers combine well with any interior and create a universal design.

Quality materials to do the job

To properly glue silk-screen printing, you will need:

wallpaper;
special glue;
scissors;
roller;
bucket;
pencil.

Wallpaper, glue, knife, brush, roller, tape measure and pencil.

Given the diverse design and texture, silk-screen printing wallpapers are vinyl. They include paper and non-woven fabrics impregnated with polyvinyl chloride. In addition, the impregnation is saturated with silk threads. Next, the product is heated to a certain temperature and embossed. That is why the coating is very smooth.

Why are silkscreen wallpapers so popular today? Due to the fact that threads are woven into the products, silk-screen printing is very durable. As a rule, such products are shiny, but matte is also sold. They practically do not fade, are wear-resistant and durable. And if the vinyl layer is thick, then the parameters can be even better. In addition, the canvases of this species have no odors and are not afraid of exposure to the sun.

Modern silk-screen printing wallpapers look very beautiful and are presented in a wide range on the market. They have a special quality, thickness, texture and, of course, a variety of colors. When you purchase the material, then consider for which particular room you choose it. For example, if you plan to glue the linens in the kitchen, then they should be dense, moisture resistant. In addition, their surface should be glossy and even. In this case, you can easily remove any dirt from the surface without damaging anything. If you plan to paste the walls in the bathroom, then use two-layer paintings.

The combination of silkscreen with the interior

Screen printing looks very beautiful and exquisite in the interior.

How to glue silk-screen printing so that the coating is combined with the interior? The walls in the living rooms can be pasted over with less demanding wallpapers, although in this case the walls are also cleaned. With the help of silk-screen printing, the interior of the house will look elegant and beautiful. It is worth noting that such furniture can easily pick up any furniture.

You can also paste on the wall with a silk screen and the hallway, while on the walls you can create a bright flicker. Thanks to this, the corridor looks original and well-groomed.

How to glue silk-screen printing wallpaper? It should be noted that the sheets are glued in the same way as other types of products. Just before gluing, the walls should be well prepared and aligned so that the glossy wallpaper does not have any defects. Remove dirt, mold, dust from the walls in advance.

In addition, it is necessary to carefully ventilate the room, since the sheets are glued in a closed room.

Before cutting the rolls into pieces, measure the height of the room where you will stick them. If the products have a sufficiently clear image that needs to be combined, then leave an allowance of 8 cm during cutting. Next, write a number on the other side of the strip so as not to confuse them during gluing.

Sticking such segments is possible with the help of special glue for silk-screen printing or any other that is suitable for heavy products. The glue is diluted according to the instructions. After that, the pieces are cut. When performing the process, you need to take into account the height of the room, and also add 2 cm on each side. Also, follow the image pitch on all pieces of canvas.

As a rule, such cloths are glued butt. Apply the adhesive mixture on the walls and on the material. After that, glue the canvas and smooth the folds. A special roller will help you with this. It should be noted that for drying two-layer paintings a lot of time is not required. And they do not emit any compounds that are harmful to people. Using this method to glue wallpaper is very easy. If you stick the canvas at least once, then in the future you will definitely not have any problems.

Silkscreen wallpaper is a common decoration material. Silk screen printing belongs to the class of vinyl wallpapers, characterized by high quality, a variety of colors and patterns. Compared to other wallpapers, the price of silk-screen printing is quite high.

It’s possible to glue wallpaper with silk-screen printing only on smooth and well-prepared walls. If a walls require preparation, then for this you need a set of tools and materials:

spatulas;
putty mixes (starting, finishing);
deep penetration primers;
fine sandpaper.

How to glue silk-screen printing wallpaper

The process of wallpapering will require the preparation and availability of such materials:

ruler or tape measure;
wallpaper glue especially for heavy wallpaper or screen printing;
scissors;
pencil;
brush;
pieces of clean and dry cloth;

How to start the process of gluing the first strip of wallpaper silk-screen printing

Follow the instructions for wallpapering the walls, if they are attached to the rolls. The correct choice of glue and its preparation for work guarantee half the success in gluing silk-screened walls of the room. A roll of wallpaper is rolled out on a clean, dry and even surface, usually on the floor. The height of the wall measures the length of the first sheet and cuts off with a margin along the upper and lower edges and spreads with prepared glue. Screen printing glue is distributed evenly over the entire length of the cut wallpaper and left for 10 minutes to soak. The surface of the wall is also covered with a thin layer of glue.

How to glue wallpaper silk-screen printing in difficult and inaccessible places

In the corners of the room, the wallpaper is glued so that the strip comes on two walls.

Wallpaper pattern should be carefully adjusted when pasting. The joints of the wallpaper should not be visible. Work is done with clean hands.

Each subsequent sheet of wallpaper is glued according to the described technology. When the wallpaper is almost dry, you need to carefully trim the excess that protrudes to the ceiling and floor.

How to make the interior richer - silk screen wallpaper

If you are doing, or planning to make repairs, and have not yet decided on the design of the walls, pay attention to the silk-screened wallpaper. This is a very interesting way to decorate the interior of any room.

After pasting with such wallpaper, the room looks bright, beautiful, richly - worthy of royalty.

Made according to the principle of "hot stamping" - this is a separate type of vinyl wallpaper. Basis - paper or non-woven, less often - fabric.

A bit of history

The term silk-screen printing itself means painting on silk. In the middle of the XVIII century, Jean Patillon began to produce wallpaper, using silk-screen printing, for rich houses. Patented at the beginning of the 20th century, the technology of silk-screen printing was put on stream by United Wallpapers in the 30-40s, producing vinyl wallpapers using the “hot stamping” method.

What rooms is suitable for?

Surprisingly, silk-screen printing is suitable for almost any room.

Bedroom

The main thing here is the pattern and color. Indeed, the bedroom is a relaxation room, and there should not be any irritants. Light pastel colors, floral patterns will do.

You can experiment, and wallpaper with darker tones (if the room size allows) - green, blue, red.

There are options for silk-screen wallpaper made on thick paper or fabric. They “breathe”, are more natural, that’s what it means for a bedroom.

Living room

This is the perfect option for this room. Suitable wallpaper in bright colors, floral motifs. Silk-screen wallpapers flicker and shimmer, which means that the room will have a truly “royal” look.

Kitchen

This room is specific, so you need to take into account such moments as heat, smell, splashes of fat, humidity. For the kitchen, silk-screened wallpaper of increased density, moisture resistant, with a stable outer layer is suitable. They should have a smoother (or even glossy) surface, since they will have to be washed more often. The patterns for this room can be very diverse: from geometric, abstract, to floral. But all of them must be combined with furniture, be bright, clear, so as not to merge with it.

Here, contrast is also appropriate.

Play with space

Silk-screen wallpapers come in many different colors and patterns. Therefore, with their help, you can play a little with space, and visually increase / decrease the space.

1. If the room is small and plus dark, then it should be pasted over with wallpaper of bright colors. And silkscreen wallpapers also reflect light well, and the patterns have a certain "bulk".

2. With a narrow long room, it is appropriate to lose the contrast option. On long walls, stick wallpaper with a darker background and a lighter pattern (colors), and on smaller walls - a bright light background with a lighter or darker pattern.

You can beat patterns with stripes.

The main thing is that these species are combined with color and pattern.

3. In a large bright room, in order to “reduce” it a little, you can use wallpaper with a dark saturated background (dark blue, emerald, dark red).

Or with a bright pattern (golden, silver, white, etc.).

Combination with styles and interior items

Silk screen printing has such a chic look that you can get confused, with what to combine it. Nevertheless, such wallpapers fit almost any style.

Silk screen wallpaper: what and how to glue?

Of course, the combination of “royal walls” with worn-out old furniture will be ridiculous. If you care about your grandmother’s table, chest of drawers, or sofa, you can restore them and give them an antique look.

It will look great.

An interesting combination of silk-screen printing with interior items in the style of high-tech.

The main thing is not to overload with details and not to combine non-compatible styles.

Advantages and disadvantages

Of all the above, it is easy to note the advantages of silk-screen printing wallpapers:
- decorate any premises;
- do not emit harmful substances;
- have no smell;
- can be washed even with detergents;
- with normal care, a service life of 10-15 years;
- A huge number of colors and patterns, sometimes the craziest.

There are few shortcomings, but they nevertheless are:
- the most important - cost - quite expensive;
- when pasting the walls should be perfectly even - this wallpaper is thin and all the flaws are visible;
- the presence of a vinyl layer does not allow the wall to breathe;
- during combustion they can emit harmful substances - but such situations must be avoided with walls without wallpaper.

How to glue wallpaper in the corners correctly: sticking video, silkscreen

Inside corners
Outside corners

It would, of course, be very convenient if all the rooms in the apartment had smooth strictly vertical walls, then there would be no problems with gluing. Take glue and continuous, bending the lines in the corners and moving on to the next wall. But the bulk of our houses are not built in the best, but not in the most even way. And what to do if there are problems with pasting corners? To understand how to glue wallpaper in the corners - you can watch the video or read our material, which will certainly help you.

Inside corners

We will perform this process four times, if not more, in any room where you need to re-paste the wallpaper. In order to then have no difficulties with this process, you need to remember once how to properly glue the wallpaper in the corners.

If your corner is already very uneven, then before gluing vinyl wallpaper you should well level it with special plaster. Now that all the corners are ready, you can proceed.

On one of the adjacent walls we glue the canvas in such a way that it wraps a little on the adjacent wall of a centimeter by 3-4. Then, we press down this corner well with a special or simply dry sponge.

Overlapping corner

The second stage of wallpapering is gluing a strip of wallpaper on a second adjacent wall. Carefully measure with the help of a tape measure or a ruler the point of location of the farthest end of the wallpaper so that the edge closest to the corner is 2-3 centimeters overlapped with the glued canvas.

var begun_auto_pad \u003d 321883614;

var begun_block_id \u003d 321883628;

But during this, it is worth checking the contour with a plumb line, which was defined for gluing the edge of the wallpaper farthest from the corner. When the marking is already done, glue the strip to the second adjacent wall.

Again press firmly with a sponge. It will help you learn how to glue corners with wallpaper on this topic

After that, using a ruler and a building level with a knife, we cut two layers of wallpaper at the same time close to the corner. The excess that we cut off from the upper canvas will fall to the floor.

But we remove a narrow strip of the lower canvas, turning the upper one a little.

Screen printing on the walls

After that, the bent end is re-coated with glue and pressed to the wall. Our joint gluing vinyl wallpaper will turn out to be smooth and beautiful.

Now that you understand how to stick wallpaper in the corner, you can safely proceed with the repair. The advantage of this method is that it can be used for both thin and heavy wallpapers.

Outside corners

Oddly enough, similar protrusions are found in many rooms and rooms (for example, slopes). If you are lucky and they turned out to be even, it is better to glue them just tightly wrapping the canvas.

But to figure out how to glue the wallpaper in the corners after all, if there are still bumps on them, is it rather difficult? In this case, we need a little overlap.

We paste on one of the walls, which are united by one protruding corner, a wallpaper so that one end is wrapped at an angle of 3-4 centimeters.

Room with outside and outside corners

We squeeze this edge to the surface, but strive to ensure that it lies evenly. If difficulties arise with this, several incisions can be made. Now cut the wrapped end vertically, while leaving only a thin edge behind the corner, not visible through the second canvas.

Using a tape measure and a plumb line, we determine and outline the line of gluing the edge that is farthest from the corner, we do this all before gluing the second canvas.

The distance from this contour to the bent edge of the first canvas should be 5-6 mm less than the width of the strip of wallpaper that we plan to stick.

We should get a little overlap. In that case, if we glue thick wallpaper (for example, vinyl), then in places where there will be overlapping, you need to use transparent glue.

Of course, the issue of pasting corners in a room is not the most popular.

Quite often, people are interested in: wallpaper silk-screen printing how to glue, as well as on the process of choosing a material for wallpaper. Finding answers to these questions will allow you to make your apartment irresistible.

According to the materials of the site: http://ag-kovrov.ru

Silk-screen wallpapers combine well with any interior and create a universal design.

Quality materials to do the job

To properly glue silk-screen printing, you will need:

wallpaper;
special glue;
scissors;
roller;
bucket;
pencil.

Tools and materials:
Wallpaper, glue, knife, brush, roller, tape measure and pencil.

Given the diverse design and texture, silk-screen printing wallpapers are vinyl.

They include paper and non-woven fabrics impregnated with polyvinyl chloride. In addition, the impregnation is saturated with silk threads. Next, the product is heated to a certain temperature and embossed. That is why the coating is very smooth.