Have you tried and built a beautiful steam room? Now it is necessary to finish the bath from the inside, which requires no less attention than external work. High humidity and high temperatures put forward special demands on materials, because not all of them are able to withstand difficult operating conditions. The choice of cladding determines how long the structure will last, how comfortable the procedures will be. Different rooms in the bathhouse require their own approach to decoration, but the most difficult is the decoration of the steam room in the bathhouse.
Steam room design in the bath Source et.aviarydecor.com
What material is suitable for the steam room
There are a lot of finishing materials for interior work. To make it easier for you to choose what kind of finishing of the steam room in the bathhouse will be done, each designer has photos and pictures of ready-made solutions. It is worth recalling that even if you made your own choice, it is better to coordinate it with a specialist, because not all materials are suitable for installation inside the hottest room.
Taking into account the specific operating conditions, the corresponding requirements are imposed on the finishing:
moisture resistance;
heat resistance;
durability;
hygiene;
environmental friendliness.
Important! Natural materials should be chosen for the interior decoration of the bath.
When the temperature rises, plastic deforms, begins to emit an unpleasant odor, and ordinary tiles crack after heating. Therefore, the use of such a finish is unacceptable in the steam room.
The best option is wood. Finishing structure depends on financial capabilities. For example, lining is cheaper than a bar, it is chosen if it is necessary to meet a certain budget. Basically, the owners of the baths give preference to deciduous wood species. Below is an example of how the interior decoration of a bath can look like, a photo of the classic version.
Quality wood for interior decoration of the bath Source stroy-block.com.ua
There is an opinion that it is not necessary to sheathe the interior with paired coniferous wood, since when the temperature rises, it releases resin. But this statement is controversial, because the resin has a beneficial effect on health, cleans the respiratory tract, and strengthens the heart.
It is up to you to decide whether or not to sheathe the interior with coniferous wood - can any of the household have an unpleasant smell of pine needles or vice versa ...
If lining was nevertheless chosen for facing the bath, then it must be of high quality. Particular attention must be paid to the external processing of the material - there should be no chips, knots, or cracks on its surface. The lining should not deform: swell when heated or dry out at normal temperature.
If wood is not suitable for you for some reason as a material for interior decoration of the steam room, you can give preference to heat-resistant tiles, it has proven itself well with significant temperature drops.
Video description
How the ceiling insulation and wall decoration in the bath are performed is shown in the video:
Ceiling protection
Protect the ceiling from hot steam before finishing. To do this, use aluminum foil or a building membrane.
Important! Do not use foil with glued mineral wool or expanded polypropylene. When heated, these materials release toxic substances.
Protecting the ceiling in the bath with aluminum foil Source ko.aviarydecor.com
The use of lining is rational or not
Definitely - yes! Lining made of linden, aspen, cedar, abashi has become popular due to its properties. It tolerates temperature changes well, high humidity, aesthetic, does not absorb moisture. The lining of the lining has a low thermal conductivity - it does not heat up, but transfers heat to the air.
The lining for the bath is not covered with varnish, antiseptic, paint, it is used in its natural form.
On our website you can find contacts of construction companies that offer bath construction services. You can communicate directly with representatives by visiting the exhibition of houses "Low-rise Country".
Preparing the walls for decoration
Starting to decorate the walls, they decide the issue of insulation and waterproofing. Without such measures, the bathhouse will not last long, and healing procedures will be reduced to simple hygienic ones. For insulation, the walls are covered with mineral or basalt wool. The second is more resistant to high temperatures, so it lasts longer.
Thermal insulation of walls in the steam room with mineral wool Source hvylya.net
Craftsmen consider a cork to be the best thermal insulator for walls in a bath. This agglomerate does not burn, does not rot, and is resistant to fungi and mold.
Lathing - to do or not
Craftsmen prefer to install the lathing and attach the interior trim to it. The popular size of the base is 50x50, less often they make 70x70. The pitch is not a standard and varies depending on the size of the blocks being reinforced.
The lathing is made of wood, less often of metal. Given the operating conditions, the metal must be treated with moisture resistant compounds. The lining or logs are fastened with self-tapping screws, nails. They must be copper or brass. The base is installed perpendicular to the skin.
The lathing of the walls in the steam room under the lining Source seattlehelpers.org
Clapboard finishing stages
Along the perimeter of the wall and ceiling fix the beam... Fasteners should be every 80–100 cm.
Cut pieces of insulating wool placed between the treewithout tamping.
From above covered with a waterproofing agent... The joints are sealed with aluminum tape, paying special attention to the corners.
Equip ventilation... For this, a distance rail is stuffed. It will provide a small gap (2–3 cm) through which air can be vented.
Do separate upholstery doors and windows.
Fix the lining... You need to start from the corner, fixing each part vertically. This position will provide a free flow of water. If a horizontal arrangement of blocks is planned, make sure that the spikes are at the top. This will keep moisture out of the lock.
The lining, located in the corners or near the walls, cut to size... It is especially important to cut the corner block correctly. It is necessary to accurately calculate the angle of inclination so that the adjacent block is correctly fixed.
Furnace insulation with sheet metal Source interistroy.ru
metal - stainless steel or profile iron is attached to the wall behind the stove;
red brick - laid between the wall and the fire;
tileshigh temperature resistant (kaolinic);
minerite - heat-resistant slab made of cement and special components.
Video description
See the video for the phased installation of the lining in the steam room:
Making the floor in the steam room
Not only comfort, but also safety depends on the choice of raw materials for the floor. Moisture on smooth tiles or linoleum can lead to falls and injuries. Installing such materials will turn the floor into a skating rink. In addition, linoleum, when heated, emits an unpleasant odor containing substances harmful to health.
The optimal choice of floor for the steam room is wood. It does not require special coverage, and with such a design, the room will be designed in the same style. It should be noted that the wooden floor in the bath is not made of oak. This wood becomes stronger after getting wet, but at the same time its surface begins to slip.
Concrete works well. A floor made of such material will be strong and durable. Tiles are laid on top of it, but the surface structure of such a coating is important. It should not be glossy, a pronounced relief is needed. The floor is laid at a slight incline towards the water drain.
Laying tiles on the floor in the bath Source seattlehelpers.org
The tiles are laid from the corner, placing crosses between the blocks, tapping with an assembly hammer. After 2-3 days, the seams between the tiles are rubbed. Wooden grates are placed on top to avoid stepping on the cold floor and provide additional safety in case of possible slipping.
Now the shelves
A very important point is the shelves in the bath. Since constant tactile contact is assumed with them, increased requirements are put forward for these elements:
they should not get very hot;
better if cool slowly;
must be environmentally friendly;
do not slide and not be very rough;
not have external damage;
easy to wash.
Again, a tree is most suitable for this purpose. Thoroughly cleaned, without knots or chipping, it has served people in the bathhouse and steam room for centuries. The shelves should not have sharp corners that could cause injury. They are not made solid, leaving a small distance between the wooden planks.
We equip the dressing room
The main function of the dressing room is to keep warm. The temperature in the room is not high, so conifers are good for decorating walls in a traditional style.
Design of dressing room and rest room "under a tree" Source koon.ru
The interior decoration of the log sauna creates an atmosphere of antiquity, ancient fairy tales. A light aroma created by pine, fir, spruce is appropriate here. The wood of these species resists fungus and mold well. It does not crack after drying, it is durable. When heated, fir almost does not emit resin.
If hardwoods are preferred, experts advise finishing the room with birch. The lining can be laid out not only in even rows, but also with a pattern. It is important that the walls in the room are covered with the same type of wood.
Bathroom and washroom
These rooms do not have very high temperatures, although the humidity is as high as in the steam room. The choice of finishes in the bathroom and sink is more extensive. Lovers of bath procedures recommend using natural raw materials for such rooms - wood or stone. Among wood, pine is the leader - it is an affordable material, however, it darkens with prolonged use.
Example of a washroom design Source profstroiplotnik.ru
Plastic is acceptable, since there is no high temperature, and it tolerates humid air well. You can use regular tiles for the shower.
What is better to use for decorating a rest room
The rest room should be beautiful and cozy, so the design of the room comes out on top. It is not necessary to install heat and moisture resistant materials here. The relaxation room should be:
easy to care for;
hygienic;
environmentally friendlym;
comfortable;
aesthetic.
Video description
For interesting ideas for interior decoration of the bath, see the video:
The decoration of the relaxation room in the bathhouse, in addition to traditional wood, can be done:
fiberglass;
porcelain stoneware;
natural stone;
decorative plaster.
Important! The tree is not assembled immediately after delivery to the construction site. He is brought into the room and allowed to stand for a couple of days, so that it “gets used to” in the bath. After this procedure, the tree does not undergo deformation when heated and high humidity.
Conclusion
Decorating a bath from the inside requires effort and imagination. But, if you do everything correctly and entrust this work to professionals, the bath will last a long time to restore strength and health. You just have to choose what kind of finishing the bath will be inside: a photo of the steam rooms will help you find the best option for style and materials.
When designing suburban housing, you should pay special attention to the design of the sauna in the house. And if it is located in a separate building, you will also have to think about the exterior decoration, and the design of the adjacent territory.
Styles and directions
Previously, the design of a bath or sauna was not given much importance - it was a room used exclusively for hygiene procedures. Today it has taken on several more functions, and first of all - places for rest, relaxation, communication with friends.
If you care about where and in what environment to relax, where to invite loved ones, you will definitely think about making the interior of the sauna beautiful and comfortable, cozy and functional with your own hands.
Steam room decoration
Regardless of whether the sauna is built into the house or is located independently, it consists of several rooms. At the very least, this is a steam room and a relaxation room.
If the latter can be finished in any style, then the purpose and use of the steam room limits our choice.
And yet there are options.
- There is an unspoken instruction to make the interior of the steam room as simple and discreet as possible.... This is due to the fact that the human body at high temperatures already experiences a certain stress, which should not be enhanced with bright accents.
In addition, this room is intended for very specific purposes, so all that is required from the environment is to help a person relax and relieve fatigue, and not get a portion of additional irritants.
- Young and energetic people may disagree with the above opinion.... If, when visiting a bathhouse, you expect to tune in to the positive and get a boost of energy for further entertainment, it is deliberately bright and unusual. To do this, you can play with light, details, use materials contrasting in color and texture.
Rest room decoration
In this room, there is a wider scope for imagination.
Of course, it is desirable to keep the design of the sauna and relaxation room in the same style, but you can also experiment using the following styles:
- Classic. Minimalistic interior with discreet details, simple.
- Modern. Comfortable soft sofas and armchairs, a large screen on the wall, glass tables.
- Eclecticism. A mixture of different styles, where the emphasis is on decorative elements.
- Country. A rustic, rustic feel with solid furnishings, beamed ceilings, wide floorboards and matching decor.
- Ethno. The design direction is chosen taking into account the style of the selected country - Russian, Japanese, African, etc.
Whichever style you choose, the main thing is to make the interior comfortable, comfortable, conducive to the type of relaxation that you prefer. It can be a quiet tea party, watching movies, playing billiards or gambling card games - to each his own.
Finishing materials
High temperature and humidity, as well as changes in these parameters in the working and non-working state of the sauna - these are the factors that limit our choice of finishing materials. There are not many options left.
Basic finishing
In the design of baths and saunas, predominantly deciduous wood is used - aspen, linden, abashi.
Wooden panels are natural materials, they have low thermal conductivity and are incapable of causing burns, and do not emit harmful substances when heated.
- Aspen and linden are considered the most suitable for decorating walls and ceilings in a sauna, creating shelves and benches. This is facilitated not only by the low price, but also by the special properties of wood. It is easy to process, has a beautiful texture and color, exudes a pleasant odor and resists moisture well.
- Abashi is a rather expensive exotic material imported from African countries. Its advantages are the absolute absence of knots, the ability to retain the original color for a long time, extremely low thermal conductivity and durability.
Abashi is an expensive product, but high quality!
Floors and doors
The floors in the sauna are also preferably wooden. Moreover, in the double room it is better to use ladders that can be raised and dried to prevent rapid decay.
Ceramic or tile tiles are often used, especially if the sauna has a pool. Its advantages are that the tiles are not afraid of the effects of water, they have a wide choice of designs, and they can be used for heated floors.
Council. For damp rooms, tiles should be rough, non-slip.
Doors, in addition to traditional wooden doors, can be glass. This will solve two problems at once: visually expand the tight space and ensure the safety of the person in the steam room.
Lighting
The design of saunas in homes should bring a sense of comfort and joy to a person. Proper lighting helps to achieve this.
In the rest room, it is designed in accordance with the chosen style, but in the steam room, the general rule applies: the light should be dim, muffled, diffused. To do this, use special shades or wooden lampshades that fit perfectly into the interior.
The options for the location of the lamps can be very different: on the walls or on the ceiling, compactly or pointwise in different places. The illumination of the shelves, performed by moisture-resistant LED strips or spotlights, looks very unexpected and impressive.
Conclusion
The design project of a sauna can be entrusted to professionals, or you can do it yourself, taking as an example a picture or photo you like. Such work will bring a lot of pleasant emotions to creative people.
The video in this article will help you determine the direction in which you need to start taking action.
The bustle of a densely populated city makes us forget how useful it is to take a steam bath at least occasionally. However, not every steam room in the private sector can boast of the aesthetics of the interior and exterior. And this is an important factor. It is unlikely that you will be able to rest your body and soul in a gray, dull building. Today we will talk about the interior decoration of the bath. We will figure out which material is better to use for a particular room, consider the stages of work that need to be done. It makes sense to familiarize yourself with the photo of the interior decoration of the bath, which will be presented in today's article.
The interior decoration of the bath starts from the floor. It is poured with a concrete screed, on which logs, a rough coating are subsequently laid, and only after that the finishing floors are laid. The next step is wall decoration. The ceiling is finished last. But in order to complete the finishing work, you should choose and purchase material, the range of which is huge in the construction markets today.
After completion of construction, the first thing you need to think about is what is done from the inside. Although no one bothers to lay a heat-insulating layer of foam or other foam outside.
Materials used for finishing the steam room
The materials for such work are quite diverse. Among them:
- lining;
- block house;
- imitation of a bar;
- oriented strand board (OSB).
If we talk about the benefits, aesthetics and compare the complexity of the installation of various materials, then the lining wins in all respects. However, its cost, if we take into account quality products, is quite high. Let's try to consider all of the listed finishing materials. This is the only way to understand which of them to give preference to.
Lining: the pros and cons of finishing material
The algorithm for working with the clapboard is as follows. Guides are fixed on the wall - or a narrow thick board, with a step of 80-100 cm. Their location coincides with the planned direction of the lining.
Important! It is better to arrange the lining vertically - this will not allow the dripping drops of moisture to linger in the connecting joints. If, nevertheless, it is decided to place the boards horizontally, then the joint spike is directed upward, and the groove, respectively, downward. This will prevent moisture from getting inside.
Having fixed the guides, we put layers of mineral wool between them (there is no need to ram it) and fasten the vapor barrier material, the seams of which are glued with aluminum tape.
Good to know! When installing thermal insulation, special attention is paid to the corners. They are the "weak link" for drafts, cold from the street, and hence heat leakage from the steam room.
We suggest that you familiarize yourself with the photo of the arrangement of the baths inside with your own hands:
The nuances of finishing the bath with clapboard inside with your own hands
Like any work, clapboarding of a bath has its own nuances. The main one is the fastening of the finishing material to the crate. To do this, you can use nails (preferably "Germanic" with a corrugated surface). However, it is more optimal to use.
The microclimate in the steam room changes periodically, which leads to the expansion and drying of the wood. Over time, this will lead to the fact that the nails will cease to fulfill their function - to keep the lining on the crate. In this sense, the screw auger is more reliable.
Important! Before starting finishing work, you need to treat the lining with an antiseptic and a fire retardant and wait until it dries completely. This processing is only needed once.
Block house: what is this material and how to work with it
A block house (from the English block house) is a kind of lining (by the way of connecting parts). However, the appearance of the block house is different. The finished wall looks like it is made of logs. The material is used for facades and interior finishing works.
The installation of a block house does not differ from a lining, but there is one nuance in its application. The coating requires treatment with antiseptics and fire retardants at least once every 2-3 years.
Important! When choosing such a finishing material, pay attention to the type of wood from which the blockhouse is made. Only deciduous trees are suitable for the inner lining of the bath (linden is the best option). For the dressing room, cheaper ash or acacia wood is chosen. Exterior decoration is performed with coniferous trees - pine or spruce (aspen is allowed).
The photos of the baths outside and inside presented below will allow you to draw up a general concept of the future project:
Timber imitation: features, advantages, disadvantages
Again, the wall cladding technology is similar to the clapboard. However, panels imitating timber are wider. In addition, they have a serious advantage - they do not crack in case of temperature and humidity changes. This is achieved by grooves on the inside to relieve stress on the wood.
The choice of material is subject to the same rules as when choosing a block house. Speaking about the cons, we note only unscrupulous manufacturers, violations of the drying technology. In addition to the "human factor" imitation of a bar has no drawbacks. The average service life of such a finishing material is 10-20 years.
Useful information! If there is no desire, time or opportunity to sheathe the bathhouse inside yourself, you can turn to the professionals. But such services can make a significant dent in the family budget. According to the most conservative estimates, the cost of finishing 1 m 2 will be 2000-2500 rubles.
Laying tiles - do it yourself or contact a professional?
Tiles are used for flooring. Less commonly, it is used for walls. Inexperienced home craftsmen are afraid that such work cannot be done on their own, but this is a delusion. In order to dispel doubts, we suggest that you familiarize yourself with the step-by-step instructions for laying tiles using the example of the flooring of a kitchen or hallway. The work algorithm is identical. The only difference is in the composition of the tile glue - for the bath, you need to choose a composition that is not afraid of high temperatures.
Related article:
Photo examples of layout options, advantages and disadvantages of the coating, technical characteristics and dimensions of tiles, selection criteria, subtleties of laying, expert recommendations - read the publication.
There are some nuances in the choice of tiles. You should pay attention to the surface - glazed will not work here, the surface should not be smooth, preventing slipping. In general, the flooring in the steam room requires a special approach. Let's try to analyze it in more detail.
Rules for laying the floor covering of the washing room or steam room
The first thing to look out for is the screed. It is performed in 3 stages. The first layer is poured first. After complete drying, thermal insulation is laid, after which the finishing layer is poured. In this case, the floor covering should be 5-20 cm higher than the poured concrete.
When installing wooden floors, a "leaky" option is often used, when water seeps through the cracks in the floor without hindrance. Installation outside will be necessary here. This method of drainage is simpler and does not require a lot of time, effort and money.
The second option is non-leaking, sealed floors. Most often used for flooring. In this case, the floor is sloped in a certain direction, and a ladder is mounted at the bottom point - a drain hole. Under the floor from the ladder there is a sewer or.
However, in addition to drainage, the flooring in the bath has another nuance - the use of tiles requires heating. Ceramics is a cold material. Considering that the temperature at the bottom is always lower than at the top, you should consider the system.
Installation options for underfloor heating in the bath
Underfloor heating systems are quite useful not only in an apartment, but also in a bath. The main task here is the correct choice of the species. They may be:
- electric (using a heating cable);
- water - using a heating medium heated by a boiler;
- - a relatively new type of heating with infrared radiation.
If we talk about wooden floors, then the optimal (albeit quite labor-intensive) solution would be to use water heating. Tiled flooring is more compatible with electric underfloor heating using a cable. Installation of infrared devices in systems "warm floor" in a bath is rarely used due to the high cost. Although the energy savings for this type of device are significant, in comparison with a cord.
Interior options for a bath inside: photos of various rooms
As you know, the bathhouse can be divided into several rooms, each of which is designed based on the preferences of the master. It may be one style, or perhaps each of the rooms will be decorated in its own way. Now we will consider in detail how the interior decoration of the bath can be done with your own hands, depending on the purpose of the room. But first, you should familiarize yourself with the ideas of home craftsmen. Below are the design projects of baths, created not by professionals, but by ordinary people:
Steam room design in a bath: several photo examples
The steam room is the heart of the bath. It should be light and comfortable. Here, like in no other room, special attention is required to be paid to the choice of finishing material. It must withstand changes in temperature, humidity, and not swell from steam. At the same time, the appearance is of great importance. For example, if you decorate the steam room inside with coniferous wood (pine or spruce), then after several washes the walls will darken, acquire a gray, unsightly shade. Moreover, regardless of what protective compounds they were treated with. We suggest that you familiarize yourself with the photo of the finish of the steam room inside the bath. Perhaps they will give the reader some thoughts:
The interior of the bath in the bath: decoration features
A washing room in a bath is a room where splashes or even jets of water constantly fall on the walls, which means that you need to attend to the choice of material, taking into account this nuance. If we are talking about wood, then larch or linden is used - these varieties are the best suited for such operating conditions. However, the best option would be to finish the floor and walls with tiles. In order to make it clearer how the washroom is finished, pay attention to photo examples of finished premises of this type:
The best photos of the interior decoration of the bath: shower room or cabin
Today, home craftsmen prefer showers, which is not surprising. They can be installed in the washing room, their installation is simple, such devices will not take up much space. Finishing is done in the style of a washroom, or it is not required at all if the shower stall was purchased in a store, in the factory version. Below you can see what a shower room might look like in the interior of a bath:
Rest room in the bathhouse - interior design of the necessary premises
Such rooms are designed to take a break from hot steam. The temperature in them is kept cool, which is facilitated by the good thermal insulation of the steam room and the location between it and the washroom dressing room.
The decoration of the rest room provides for the use of various materials - strict requirements, as in the decoration of the steam room or the washing room, are not imposed on them, but the aesthetic appearance is even more important here. Darker tones are used. The ideal wood for finishing the dressing room is stained oak. For example, you can pay attention to the photo of the design of the dressing rooms, the decoration of which was carried out by home craftsmen:
And a few more photos of the interiors of the bath and the rest room:
Looking at these photos of the interior design of baths with rest rooms, it is hard to believe that the decoration was carried out by craftsmen without any experience and education of a designer, but this is a fact.
Dressing room in the bathhouse and its features
The locker room is the driest room, which means that there are no high requirements for finishing materials. Even the use of pine or spruce is allowed - after all, the microclimate here will be similar to the living quarters.
Important information! If coniferous wood is chosen for finishing the locker room, you should take care of the outer covering of the lining, block house or imitation of timber. Protection is needed here not so much for wood as for clothing that will come into contact with the walls. Coniferous boards can give off drops of resin, which is quite problematic to clean from things. Below are photos of the interior decoration of the sauna, namely the ideas for the changing room in the bath.
DIY outdoor decoration: photos of beautiful baths
Bath facade decoration is equally important. In addition to aesthetic, it also performs protective functions. Consider examples of the design of the appearance of baths in the photo examples:
Conclusion
Summarizing the information presented, we note that with the correct and thoughtful approach to finishing the bath, you can do it on your own, without the involvement of professional craftsmen. Additional savings are achieved by a thoughtful approach to the choice of material.
If all actions are performed in compliance with simple rules, the steam room will last for many years, will delight with an aesthetic appearance for a relatively low cost. But the main thing is the incomparable feeling of relaxation, which is given by the country sauna, heated by birch logs.
And finally, we suggest watching an informative video clip on the topic of bath ceiling insulation.
There is no better place where one could simultaneously relieve fatigue after a busy week of work, find peace of mind and give the body purity than a bathhouse. For many, visiting it is an integral part of life, so everyone would like to have such a building for relaxation and recovery. And if you plan to build this room in your own yard, you should make sure that the interior of the bath is at its best.
High-quality and comfortable interior decoration of the bathhouse will never give you any trouble, and in addition to the pleasure you get, it will pay off in speed and, if you wish, will begin to bring additional income. Today "Dream House" will tell its readers how to equip the interior of a sauna or bathhouse. These ideas can be used both for your own home bath and for business.
What materials are used for the design of the bath room
After the construction and insulation of the bath complex, the turn is suitable for interior finishing activities. In this regard, there are certain rules that have significant differences compared to work in other buildings.
The impeccability of the interior of the bath lies not only in its comfortable appearance, but also in taking care of the health of its visitors. The level of stylization and practicality should complement each other, and this largely depends on the choice of materials for finishing inside the bathhouse, which should have the following properties:
- durability;
- strength;
- ecological cleanliness;
- the ability to keep warm;
- low thermal conductivity, which prevents burns;
- resistance to temperature extremes;
- resistance to high humidity.
The traditional material that fully meets all the requirements for work inside the bath space is wood. In addition, wood looks aesthetically pleasing, pleasant to the touch and emits a delicate and healthy aroma, which is used as aromatherapy and has a beneficial effect on the entire body.
The interior, where such natural material as wood reigns, is beautiful in itself. It breathes with pleasant warmth and tranquility, which creates a peaceful atmosphere. Bathrooms can be clad with one or several types of wood, depending on the purpose of the rooms.
Of course, the interior of a modern bathhouse is equipped with other materials. Rounded logs, or block houses, perfectly coexist with stone, brick or tiled masonry. The combination of various textures will highlight each of the rooms of the bath space in a special way.
You should know that paints and varnishes are not applied to the materials for the interior decoration of the bath. When heated, such coatings emit harmful substances and are not able to withstand temperature extremes.
Bath interior inside photo
Bath design inside photo decoration
Bath room interior decoration
A modern bath is a multifunctional enterprise designed not only for bath procedures, but also for relaxation. The standard bath rooms are a dressing room, a steam room and a shower room, which require individual improvement. The saunas of our time can also have an entrance vestibule, a mini-kitchen, a pool, a toilet and playrooms.
Dressing room
The dressing room acts as a dressing room and rest room. This room, which protects the entrance to the steam room from the penetration of dirt and cold, sets you in a calm mood and serves as a rest after significant stress on the body.
Now a bathhouse without a meeting room is practically not found. After the steam room, no one will refuse to relax and have a nice time with family or friends.
Unlike a steam room and a shower, when creating a design for a rest room, imagination can be expanded by delighting guests with an extraordinary approach.
Coniferous wood, such as pine and Scandinavian spruce, is suitable for finishing the dressing room. In addition to wood, you can transform the interior with stone, brick, tile or plastic. Fashionable notes in such stylistic directions as English, or furniture, paintings, mirrors, chandeliers, fabrics and various accessories will help to add.
Bath interior and rest room photo
Bath design with relaxation room inside photo
Bath interior photo
A relaxation room in a bathhouse can be considered a guest bedroom if it is equipped with a full bed and supplied with bedding, slippers and bathrobes.
Rest room in the bath interior design
Steam room
The high temperatures and humidity of the room for the main procedures dictate special rules when choosing a material for its decoration.
For covering the steam room, only deciduous woods are suitable, which do not lose their qualities for years, such as linden, alder, aspen, larch and African abasha tree. The floors of the premises are made using both boards and tiles with a non-slip surface. It is advisable to give preference in favor of tiles, since the wooden floor will deteriorate over time.
We advise you to design the steam room in tone, because the texture of the wood itself serves as a wonderful decoration. Therefore, it will be enough to restrict ourselves to such basic attributes as benches, multi-level sun beds, dousing buckets, buckets, etc. A great option for placing sun loungers is a corner space, which will embellish the room and save space. Inside the steam room, you can use a window that perfectly dilutes the interior and is useful for ventilation.
Bath interior with steam room inside photo
Steam bath design
Bathhouse and sauna interior design
Interior of a wooden bath photo
Shower room
The washing block is a separate element of a modern bath, which provides an opportunity to retire from prying eyes.
For cladding the shower room, it is most advisable to use tiles, complementing the design with elements such as and. The only requirement is that the surface of the floors must be rough or covered with wooden gratings. The choice of equipment for equipping a washing room is quite large. You can install a font, a shower stall, or in it.
Beautiful interiors of a bath photo
Design of a small bath inside the photo
The interior design of the bath is an important point for a favorable atmosphere
It is believed that for true vapers, a bath is, first of all, just a process, and what surrounds in blissful moments is a secondary matter. But this is not at all the case. A modern bath is a place for a pleasant pastime, enjoying relaxation and beauty of the interior. Its internal arrangement should be conducive to relaxation, calmness and good mood.
No matter how you decorate the interior of the bath, the main task is to achieve full pleasure from being in its "embrace".