Pliers sizes. Photo of the difference between pliers and passats. Passatia - Universal Tool

Passed and pliers are common and demanded tools, both in everyday life and professional masters.

Meanwhile, many confuse PASSATIA with pliers, without seeing a big difference in them. Below is explained by the difference between the passages and pliers and which of these tools is most in demand and universal.

Pliers by type

According to its appointments, pliers are different:

with short sponges for durable and strong grip
with elongated sponges
with narrow (or thin) sponges
with curved - when working in hard-to-reach places
with internal plastic overlays so as not to damage the details
specialized, to work with wire

The working (internal) surface of sponges is smooth or with small shallow notches - for better capture of the subject. "Sponges" is called the part of the tool that the details capture.

Differences of Pasal Freaks from Pliers

Passatia is a plumbing tool, outwardly similar to pliers. In some versions - they are no longer confused with pliers - an overdue hinge mechanism is used. Sponges of standard passation usually shorter sponges of pliers.

The name "Passed" is French, literally "clamp the rod". And to clamp it tightly, on the inside of the edges, always corrugated - with notches, there is an oval or round recess, often two.

Passatia more serious tools

Passatia, unlike pliers, are designed for more serious works. Therefore, according to part of the strength, the requirements for them is high. If the level of hardening the pliers does not exceed 45 units, then the passage is hardened to 53 units. And cutting parts are booths and cutters - hardened 60 units.

Metal they are also good

Higher quality and metal from which the passatati is made. If the carbon steel of a certain brand is used for the production of pliers, then for the release of the Passage take chrome in combination with molybdenum or vanadium.

GOST Sizes

The size of the passation is different. There are categories "miniature" - for thin and accurate works, such as stand models or beadwork - 10 centimeters.

The dimensions of the tools for assembly, plumbing, automotive and other works are listed in GOST 17 438-72. For the passage of the first group, it determines the length of 160, 180 and 200 mm.

In the second group, intended for industrial work, fit into three types of length - 200, 250 and 300 mm.

Import products, EU, USA and China, are sized 10; 11.5 and 14 cm.

What are the passatizhi

The production and everyday life uses different types of passage:

Universal
Dielectric
Combined
Elongated
* Adjustable, sometimes they are called pipe
For luphertov

If you compare the photo of the passage of all these species, the differences immediately rush into the eyes. The following are their main functions and destination.

Passatia for all occasions

Passatages are universal, or as they are also called - plumbing, often incorrectly called pliers. They, after small lips, there is necessarily a gear excavation. It follows the side by side - to cut the wire, and next to the hinge cutter for snacking more durable wires, nails and even grids chain.

To work under voltage

Dielectric Passatages are designed for electric work. They are produced with insulating handles, usually rubber or rubber combinations with various types of dielectric plastics.

Network voltage is divided into two types - in everyday life 220 V. At the production of the same 220 V and extra in 380 V. In order to avoid trouble, the insulating handles of the Passatizes are able to protect against the stress of 1000 V.

Note: This parameter is defined on the passatives themselves, and not on its packaging. Since it is about human life, the dielectric passage is better to buy proven manufacturers.

Passatia for luberov

Plastic refover or metal designed to strengthen holes in shoe, leather goods and other industries and workshops.

Based on this, "lumens" passasati - a highly specialized and narrow-professional tool. They differ from other passage with a specific type and easily recognizable.

The longest of the passage

Extra long passatati are distinguished by long sponges. In some embodiments, the length of the sponges comes to 20 centimeters. Outwardly, they resemble tweezers to which fell pens of the passage. They are designed to work in narrow clips or holes.

On the principle of a perico knife

This species is exactly opposite to narrowly specialized "lumens". It is called "Combined Passatsii". This tool is intended for different homework. But they also enjoy professionals as universal - for all occasions. But in this case, the tool must be from a high-quality manufacturer, otherwise it quickly fails.

Combined Passatages are made according to the principle of a peer or Swiss knife and are equipped with a mass of functions and opportunities.

Usually combined pasatati only part of a multifunctional kit, which includes a number of necessary tools, such as screwdrivers with nozzles.

Pasteati for sanitary ware

Plumbing are the largest among the passage. Use them exclusively for sanitary work. To capture gas or water pipes of a large diameter in the design of these tools, a stop-blank hinge mechanism is applied. Due to this, it is possible to change - increase or decrease the diameter of the toothed excavation.

Photo differences between pliers and priests

Content:

There are many varieties of the articulated tool. These include familiar nippers, ticks, round-rolls, as well as passas and pliers. Each listed tool is intended for certain purposes, has its own sizes and form of the working surface. The design includes three main parts: a head in the form of sponges or cutters, axial moving hinge and handles. However, they are all distinguished by their own individual qualities. In the article, we consider how the pliers differ from the passatate.

Pliers: Appointment and design features

Pliers belong to the category of hand tools used in electrical installations and operations with metal products. The working surface has a pyramidal form, notches are applied on the inside of the flat sponges.

The design consists of two parts that are connected to the letter x and are fixed on the hinge, providing their mobility. Each item consists of a working part, turning into a handle and the component with it a single whole. Thanks to the flat surface of the sponges, it becomes possible to be reliable capture, bend, confident retention and twisting of the wiring, as well as various parts from wire and soft metals. In addition to its main purpose, pliers can be used as a wrench, the dimensions of which are limited to spreading sponges.

Types of pliers:

The tool for which the narrow sponges are elongated, has a smaller compression force and is used in working with small items.
In other structures of pliers, the sponges are bend at a certain angle. This makes it possible to work with the details when access to them is significantly limited. This type of pliers are especially relevant for electronic devices, where parts are hidden under the boards.
For working with stress details, there are special dielectric pliers. Isolated handles allow you to freely work with an electric current. Their handles are marked with an indication of the allowable maximum voltage at which you can work.

Passatia - Universal Tool

The basis of the passage is the pliers that appeared significantly earlier and were intended to perform the simplest functions. As a result of modernization, the pliers turned into Passed and became a popular multifunctional tool. Passatias are equipped with small sidebasins, two small cutters located on the sides. In the middle there is a round corrugated hole, with which small bolts and nuts can be spinning.

Without passports, assembly and plumbing work do not cost. They perform the functions of the pliers and can carry out many additional operations. Thanks to numerous devices, Passatias work successfully with various details, regardless of their configuration. Thus, the Passatias acquired universal qualities at once many tools. They have become simultaneously pliers, windows and cutters capable of cutting the wire of the widest range of sizes and diameters. In some samples, the ends of the shib and screwdriver are covered.

To perform installation and fitter work, mainly dielectric and combined passes are used. The first option relates to, whose knobs are exhibited by a special dielectric plastic. The second design is considered a more versatile, combining various tools. This allows you to perform a lot of plumbing work of the widest spectrum and orientation.

What is the difference in pliers and passage

Based on the previous description of each instrument, it can be concluded that the main difference between the pliers from the pliers is their multifunctionality. This is due to the fact that the pliers have only one function - capture, and only some models can peroxide the metal wire.

Initially, only pliers were used for all work, which there was no alternative. Gradually, their modernization and improvement was carried out to the technological level of the passage, which were mediated in a separate tool. Passatii can snack almost any wire, while pliers this ability is significantly limited. Passatages securely capture any detail, thanks to the existing recesses, and the pliers it is impossible to do it. Before you choose one or another tool, you need to decide in advance with the list of those work that you have to perform.

What tool to choose

From how correctly the instrument is selected, the quality of work performed with its participation depends. Therefore, despite the fact that Passatii have significant differences from the pliers, the choice of each of them should be approached responsibly.

More attention in the selection requires passage due to a large number of different functions. Currently, a large range of these products is offered, therefore the probability of error becomes high enough. It is advisable to gather all the necessary information about the necessary tool in advance and only then go for the purchase.

First of all, you need to pay attention to the material from which the passatats or pliers are made. It is best to acquire a product from well-known manufacturers, and not cheap Chinese goods. The material surface must be homogeneous in all places, and all parts are equally strong. Passatia is usually covered with anti-corrosion materials. It is recommended to hold them in advance in your hand, trying to how much they will be convenient when performing work.

Pliers are an integral part of any wizard, whether it is a professional locksmith, installer, plumber or electrician.

They can be captured, retain, bend and twisted various objects, including those under voltage (when using dielectric models).

How to choose pliers

The first thing you need to consider when choosing a tool is for what purposes it is needed. If the product is required as a working manual master tool, then their professional types should be considered.

Varieties intended for domestic purposes are not suitable for continuous use and increased loads.

The second criterion is the manufacturer. High-quality tool, subject to proper operation, can be served for many years.
You need to pay attention to the performance and functionality of the pliers. Electricians need to choose electrically insulated model. Professionals It is advisable to have several types of products for various types of operations.
Tool knobs It is advisable to choose ergonomic, repeating the anatomical shape of the hands. In the case of long-term use during the working shift, the wizard is less installed.
When choosing manual tools, their color is important because, for example, black pliers are difficult to find in dark rooms.

Therefore, it is desirable to give preference to models with a bright coating of the handles. Currently, you can even purchase pliers with a fluorescent coating of the handles that will shine in the dark.

When choosing a product, you need to check it, compress the handle. At the same time, the tool sponge must be tight and smoothly closed.
The desire to save on the hand tool and the purchase of goods is not official dealers may entail the acquisition of non-original products.

It will be an excessive waste of money, as they will not serve for a long time. The fake will not meet the security requirements.

It does not matter which decorative coating at the body of the product (chromium, nickel, etc.), that is, the external beauty of the tool. It absolutely does not affect the functionality and other essential characteristics of the product.
The presence of additional functions in highly specialized models (most likely they will not use).

The best combined pliers are Knipex. Their manufacturer is a German firm producing high-quality hand tools according to VDE standards.

Passatias of this company can touch the solid wire. They are the most expensive, but at the same time durable, ergonomic and high-performance.

Passatias for professionals under the brand Bahco. (Sweden) are one of the best and produced at factories in Western Europe and the United States.

Products complies with ISO standard. All Bahco combined products are electrically insulated.

Tools under brand Irwin. (USA) are also professional and distinguished by high quality.

The electrically insulated combined pliers of this manufacturer comply with VDE standards, but they have a smaller service life than the above models.

The combined product has a wire cutter in the middle and sides (side slots in the hinge area). In addition, there is a removal with teeth to capture round items of small diameter in the passage.

This model is intended primarily for capturing and manipulation with wire and cylindrical objects. Modern pasatati can be equipped with a return spring or a stop-up hinge to regulate under pipes of different sizes.

Pros:

multifunctionality
universality.

Minus: Most often household orientation.

Relevant products firm Beadsmith. It is high quality with a silicone coating of the handles, which does not slip and sits well in his hand.

They are ideal for aligning wire and work with a fragile material, but have a rather high price.

HTP-18 model with nylon nozzles firms Micron. It is the most popular in Russia due to the excellent combination of price and quality. It has high functionality, despite the budget value.
Tools with nylon nozzles production Beadalon(USA) are functional and easy to use, but their quality is no better than the cheaper model of MICRON.

Pliers intended for the manufacture of jewelry and other similar works are made with nylon nozzles (tips).

This is a tool with non-slip coating of the handles and soft protection on sponges, which allows not scratching fragile parts. They can be used for domestic purposes.

Since this model is not intended to work with electrical installations under voltage, its handles are not isolated properly from the effects of electric current.

In addition, such tools are not reinforced and have a big margin of safety. They cannot be used for other purposes, since they will quickly come into disrepair.

Pliers for stripping wires Bahco. 2223 S-150 made of high-quality alloy steel with plastic coating of the handles are treated with the use of oxidation and anti-corrosion treatment; Clear wires up to 5 mm.
Electropassati to remove insulation Kraftool. Made of high-quality carbon steel with plastic handles and have an anti-corrosion coating.

These products have a good quality at an average price, but can only clean the wires up to 2.5 mm.

Passatii to remove insulation " Bison electrician", High-voltage from high-quality instrumental steel, have a resistant chromonicel coating.

Pliers for stripping wires have electrical insulation. They are suitable for working on electrical equipment under voltage up to 1000 V (alternating current) and 1500 V (permanent current).

Using such tools, you can clean the wires with a maximum of up to 5 mm. Their mechanism allows you to remove isolation without damage to current-carrying livers.

Such products are safe and functional, but they cannot be used for other purposes.

Bahco. 2713 A from vanadium steel with chromonichel coating and anti-corrosion processing.
Adjustable pliers Usag (Italy) from chromo-vanadium special steel with 7 provisions and enamel finish.
Proskit. PN-P010N (254 mm) made of steel S45C with insulated handles.

Adjustable pliers are a type of a hinged-glued tool that allows you to change the width of the opening of sponges depending on the size of the item you want to clamp.

Such models have retainers to establish a certain opening width. They can capture both flat and round items.

When compressing the arms of the sponge of such a manual tool should be tightly converged.

The regulatory mechanism is performed with the permutation of the hinge:

in holes;
in semi-silence;
with the fixation of the protrusions in the grooves.

The ability to change the position of the sponges is the unconditional advantage of this species, but the disadvantage is certain bulky.

Electrical models of the company Knipex. There are combined (ordinary and special power), as well as in the form of elongated passage.
All pliers Bahco. They are electrically insulated (booths, pliers, pliers, roundheads, bologtes). The quality of these products is practically not inferior to Knipex, but the price is slightly lower.
Electricalized combined models, climbing, plugs for stripping wires, booths and ospogubers under the brand Irwin. (USA) are high quality and secure.

Such a kind allows you to maintain electrical installations with alternating voltage up to 1000 V or permanent to 1500 V.

The dielectric pliers are equipped with well-insulated handles that ensure the safety of the wizard from the leakage of the current. Electric insulation of good tools consists of several layers. They are easy to learn about the thicker coating of the handles.

Dielectric can be different models of hinged and glued tools. This increases their functionality and safety. However, some manufacturers do not have limiters.

Pliers stopped - wrench Knipex. From chromovanadium steel, wrought iron, tempered in oil. Quickly rearranged by pressing one button.
Realcate ticks Bahco. With 11-12 positions, switching 1 button.
Pliers stopped Irwin.from wrought iron carbon steel with pinching protection.

Sliding models allow you to quickly capture rounded, hexagon, square and flat objects. Sponges in such a tool have bending.

The dimensions of the sliding pliers are more than the simple species. The width of the opening of the sponges is adjustable in some cases by pressing the button and can be configured by one hand. The capture width is up to 45 and 65 mm.

Side muffins Knipex. From vanadium steel splashed in an electric furnace, tempered in oil, with precision processing for a long period of operation.
Sideboards Bahco. (High-quality alloy steel with anti-corrosion processing) with progressive geometry of cutting edges.
Diagonal bustard Irwin.from chromic nickel steel with hardened cutting edge.

The side pliers have a cutter on one side of sponges. In fact, these are nipples intended for overcoming (snacking) objects from various materials.

Sideboards can be used in working with wire of different stiffness, plastic, sheet metal, cardboard, etc.

When operating this model, it is necessary to take into account that a variety intended for pumping copper will not cope with elements of solid materials (iron, steel). This will be damaged to the tool cutter.

Long Hubbles Knipex..
Products with long sponges Bahco..
Long Hubbles Irwin..

Models with extended sponges are called long gunners, water-linked or oxigubs. They are intended for capturing and manipulating objects (first of all, wires) at a greater distance than ordinary models.

Such tools can be equipped with cutter cutters.

Most often, such a model is used to establish wiring in distribution box, when laying wires, as well as when connecting electrical installations. They are also widely used by jewelers to secure stones in jewelry.

Kruglogs Knipex. From forged chromovanadium steel, hardened in oil, withstanding heavy loads.
Model with round sponges Bahco. From high-quality alloy steel with anti-corrosion treatment.
Kruglogs. Irwin.from chromic nickel steel.

Tools with semicircular sponges are designed to work with wire. They are without cutting edges or with them. If there are cutters, such products besides capturing and manipulating the wire, they can also snack it.

Semicircular sponges are specially designed to capture uneven surfaces. They are made of hardened steel. The tool is in demand during fitting and installation and repair work.

Advantages of the form: You can work in hard-to-reach places with round holes. At the same time, their weak place can be called a small area of \u200b\u200bthe working surface.

Pliers recycling firms AIST. from chromovanadium steel.
Shock-mechanical tools Matrix. from chromovanadium steel.
Multifunctional fishing products FRICHY FPN 02. From polished stainless steel, equipped with secure socks.

Multifunctional (shock-mechanical) pliers can be used in basic purposes, as well as as a hammer.

This model is equipped with long handles and a metal brought for impact on various items (nails, etc.). Such products have a sufficiently large weight and increased dimensions.

There is also a multifunctional (recycling) model. In addition, there is a foldable model on the market, which is equipped with a knife, opener and a screwdriver set. This product is best suited as part of the hiking inventory.

Perhaps it is impossible to imagine a more popular hand tool in everyday life and professional activity than Pasali and pliers. The difference between them is quite significant. And at least some people confuse these two types of tools because of their appearance, but the quality and even manufacturing standards in both cases are not the same. The difference in passage and pliers must take into account all the masters when choosing them. For each, a specific type of tool is suitable.

The general concept of a hinged-gloomy tool

To understand the differences between the passages and pliers, you should be inserted into their device. Both of these varieties belong to the class of hinged and glued tools. Similar type of primary means used still ancient masters.

This class of the tool includes various pliers, round-rolls, nippers, passas, ticks. Each of these species have its own purpose. Passatias and pliers, the difference (photo is submitted below) between which each master should understand, have their subspecies.

Basically, they differ in the sizes of sponges, which makes it possible to apply such remedies for the work of any complexity. Each type of hinged-tool is designed to perform a specific type of operations.

For electrical work, you need to choose a special type of equipment. Its handles are isolated by a special material, which most often maintains the voltage of 1 square. Plumbing and locksmiths can choose simple varieties of passatizes and pliers.

Characteristics of pliers

The difference between Pazatias and Pliers (photo presented to your attention Next) it is easier to understand, considering the characteristics of each of these technicians.

Separate attention deserves their appearance and application of masters. The length of the passage is in the range from 12.5 to 20 cm.

Types of pliers

Considering such varieties of a hinged and glued tool, like Pasal and Pliers, what they differ, it will understand easy. In order not to confuse these two hand tools, you should describe their subspecies. Pliers include several varieties of fixtures. They differ in the working surface.

If the sponges are elongated, it will allow working in hard-to-reach places, reach the desired wires or parts. If they are not only elongated, but also curved, it is most likely a tool for electricians. Such devices are used in operation when it is extremely difficult to get to the object. Bending radius can be 40 or 60 degrees.

"ILKONOS" is similar to tweezers, only have a greater force of compression. Passatia and pliers, the difference between which in some respects affects the work of the master, can have various nozzles. This will skillfully treat fragile materials.

Characteristic of Passatizhey

Passati and pliers are a similar tool and can be small, medium or large. The scope of their use is similar. They are used in plumbing, assembly, electric, sanitary work, etc.

The surface of the sponges of the Passatizhey has a recess. This allows you to hold round smooth details. Most often, the surface in them is combined. There is a flat section, as well as recesses of different diameters.

Pasal and pliers, the difference between which is not only in the shape of the surface of sponges, are also features. This increases the range of operations master performed.

Passati allows you to regulate the power of compression, as well as the distance between the surfaces of the sponges. Therefore, such a tool is suitable for details of various diameters.

Additional facilities of Passatizhey

Passatias and pliers, the difference between which is in functionality, must be seamless in accordance with the type of activity of the Master. Electric and plumbing must choose the appropriate type of manual tool.

Based on the needs of a specialist who enjoys passatships, the latter may have different additional features. Many manufacturers provide their products with rapid products. This device allows you to remove isolation from the cable, cut the wire.

Sometimes there is a special edge on the front side of the passage, which allows you to cut a very durable wire.

In other cases, the work area of \u200b\u200bthe Passatizes is distributed by the hinge compound. There are serifs on the handles of such models, allowing to keep the workpiece not only with sponges. Not every master is convenient, but it depends on personal preferences.

Characteristic differences

There are a lot of similar features of Passatias and pliers. What the difference between these two similar tools should be considered more.

The very first thing that can be noted when studying these products is the difference in the shape of sponges. The inner surface of them in the passage has a removal to hold the parts of the round shape. Pliers and possess a flat surface with notches for better clutch with the surface of the part.

Passatias have the same sponge width over the entire length. Pliers can also have a different length and width. The choice depends on the instrument assignment.

Main differences

Passatias and pliers are small, medium or large possess three main differences.

Form of the surface of sponges. The pliers it is smooth, and in the passage - with a notch. In the second case, the tool is designed for more durable types of steels when working.
Ability to adjust. Choose the required clearance of the working surface and the compression force is possible only in the case of passatives. Therefore, it should be taken into account such a feature when choosing tools.
Universality and additional functions (sidecards, special edges) are inherent only in passage. However, in the case of completion of simple work for ease of management, you need to stop your choice on ordinary pliers.

How to choose a tool

Passed and pliers, the difference between each other, determines and the sphere of their use, it is better to choose professional. These are the most durable products that will serve their owner for many years. Cheap models sometimes lose their functionality quickly or generally fail. Therefore, when choosing a tool, it is better not to save.

High-quality product can be determined by looking at the hinge department. Here should not be the backlash, and the course of the handles must be smooth. When connecting sponges there should be no gaps, distortions. In a high-quality tool, they are closed evenly.

It is extremely important, especially for conducting electrical work, so that the handles sat tightly on the base, did not eat. This will allow working with undergraduate tools. Safe, without fear of shock.

Having read the distinctive features of such products as Pasali and Pliers, the difference from each other will understand any master. In accordance with the required type of work, a manual tool is selected. It is distinguished by dimensions, forms, additional features and functionality. Each specialist should take into account the features of the hand tool and acquire high-quality instances. This will be the guarantees of the long life of the passage and pliers of any configuration.

In each house, regardless of its inhabitants, there is a specific set of tools that will always come in handy. One of these tools are pliers or passage. Despite the external similarity, these two tools have some differences. Both belong to a large group of hinged and glued tools.

The history of this kind began long before our era: it is enough to recall the ancient Greek God-Kuznez Hephetz, who was portrayed with blacksmith ticks and hammer for forging.

This group includes pliers, passage, ticks, nippers, round-rolls. Each of the tools has its own production standards and is needed for various works.

In contact with

Odnoklassniki.

What is pliers

Their name is pretty eloquently shows the peculiarity of the instrument: it consists of flat sponges on which notches, handles and a special connection are applied. Thanks to the notches, the pliers easily hold the details of any form, as well as bent the wire, cable veins or metal sheets.

Also, the tool is often used instead of a screwdriver when you need to unscrew or spin the nut. You can use pliers as a tool for flexion only in some cases, since the lip width does not exceed 20 cm.

There are several types of pliers that differ in lip types.

The last happens:

Extended narrow: They are suitable for work with minor objects or in hard-to-reach places. Have a small strength of compression.
Narrow curved: mainly used in electronics to access the most "impregnable" places, for example, under the fee.
"Airplaes": these are pliers with strongly elongated sponges. According to functional features, it is similar to tweezers, but allow you to harm it stronger.

For works with fragile materials, special nozzles with surface protection are used or without screws. For work with electricity, pliers are used with insulation on the handles: the maximum current value should be indicated. Most often, such tools are withstanding to 1000 V.

Note: Use conventional pliers when working with electricity is prohibited, since the handles are not protected.

What is Passatizhi

They are often referred to as the "younger brother" or even a multifunctional pliers model, but with this statement you can argue. The name comes from the French "PINCE" and "TIGE" - "clamp" and "rod".

In contrast to the pliers, the sponge of the Passatizes also have a flat part, and a small remission, which allows you to grasp the part with an overlooking surface. It makes the tool more in demand and universal. In some models, two recesses are provided immediately to work with different sizes.

Tools are used for:

clamp of parts in the process of working with them;
taking hot metals;
connector crimp in the absence of special tools.

Should be taken into account: Passatii can also be used to twist the nuts, but it is worth it only in extreme cases, as you can disrupt the face.

All varieties have their own characteristics that are easy to see in the photo:

What is the difference

Despite the fact that the tools look like pliers and passasi have a number of important differences, prominent on descriptions:

The main difference lies in the surface of the sponges: the pliers it is straight, in the passage - with recesses for some details;
Specialization of pliers is narrower: they are intended for the detail only, all other functions (snacking, bolt twist) are not their "relatives", which can lead to problems. Passatias are more functional: they can cut wire and metal, more firmly hold the part;
For the manufacture of passage uses more durable steel, as the tool is designed for greater compression force;
Passes have a larger capture range due to the presence of a mobile connecting hinge. It helps to expand the use of the tool;
Often there are more expensive, since they are more functional.

When choosing tools, the main thing is not how much they cost, but their quality and strength. At first you need to decide on the functionality: if the passage or pliers will be used in working with electricity, they must be protected. If the tools are supposed to take with them and use for small household work, it is worth choosing a combined passage - it will save place and money.

Note: Do not save on purchase: it is better to choose high-quality models that will serve for several years than to change them regularly.

To make the right choice, you should pay attention to the following:

sponges must be integer, feel tight to each other, do not hang out, do not have gaps or cracks;
the handle must be well lying in the hand, do not slide and be comfortable;
the connecting hinge must be strong, well tightened, but not tight, with smooth, pleasant move.

Choosing a tool, it is desirable to be able to try it out, hold and adapt.

Many believe that pliers and passage are one and the same, but it is not so, although in some situations they can replace each other. Both instruments, although they perform similar functions, have a number of differences that it is worth remembering. When choosing a model, it is important to clearly represent their purpose so as not to buy a useless thing, it is also recommended to consider the model in the pictures in advance.

Watch a video in which a specialist tells in detail what the Pasal Frames differ from the Pliers:

In contact with

See inaccuracies, incomplete or wrong information? Do you know how to make an article better?

Want to offer photos on the topic?

Please help us make the site better! Leave the message and your contacts in the comments - we will contact you and make a publication better together!