Do-it-yourself flower stand diagram. Original do-it-yourself flower stands - the choice of material, type, good advice and photo ideas. High floor stands

The easiest way is to go to the store and buy a ready-made flower stand / rack. Today, manufacturers offer many different models of planters, shelves and wall structures. Moreover, such products can be quite different in appearance, design and shape.

It is more exciting to do the manufacture of flower shelves with your own hands. The Internet is full of detailed instructions and master classes that describe this process in detail. As for the materials, you can use any available tools of your choice or purchase "raw materials" from a specialty store.

The advantage of creating a stand for indoor plants on your own is the uniqueness of the end result. You can decide on the design configuration, color scheme, texture. And you will not have any doubts about its exclusivity. Such a thing will be the subject of your pride and the envy of others.

A product made with trepidation can become one of the brightest accents in the interior. As a result, all actions for its manufacture must be done carefully, without haste and fuss.

Thanks to homemade flower stands, you can emphasize the design features of the room, for example, create the atmosphere of a French province or an Alpine chalet.

An example of the original rack

You can make a stylish flower shelf using the simplest things, such as twigs and planks. Pots must be placed on planks one above the other. And if you replace plant pots with glass jars, this will add originality to such a craft.

This design looks very interesting and allows you to quickly arrange indoor flowers. She takes up minimal space.

Are calculations necessary?

Simple variations of flower stands do not require calculations. However, for more complex designs, it may be necessary to sketch. The more complex the idea, the more calculations will be needed. They are necessary to avoid instability and unsteadiness of the stand. In addition, thinking about the nuances allows you to achieve ease of use.

Advantages of making your own hands

Now there are a lot of outlets that sell materials that can be used to create flower shelves with your own hands.
Any creativity allows you to make a thing so that it fits exactly into the existing interior.
The rack can be made to any size you need.

Design for pots on the windowsill

The flower stand on the window must meet the following requirements:

compactness;
high light transmittance;
aesthetics.

It is best to place violets on it.

When deciding on the design, it is necessary to pay attention to lightweight suspension-type systems. Most often they are designed to be placed on the sides of the windows. Such a solution has many advantages, the main of which is that they give a minimum of shadow.

Most often, multi-tiered whatnots are made of wood, choosing breeds that are easy to process. There is nothing difficult in creating coasters from wood. The process itself is very exciting.

The cost of flower shelves will tend to zero if you use the materials left after the repair, for example, cutting chipboard.

Wrought iron stands/stands for flowers

Making a metal stand at home is not easy, but it is possible if you put enough effort. In addition, forging skills are needed here. But, before starting work, you need to make sure that such a thing would be appropriate in relation to the chosen interior style.

Forged structures for plants can be both floor and wall. Both solutions are quite elegant and convenient. The choice depends on your preferences. But remember that metal coasters are more expensive than wood ones.

Other materials

A popular material for creating flower shelves is plastic. It can be of different colors and textures. It's easy to work with him. No special skills or special tools are required. Shelves and racks made of plastic for placing plants can be made even by a beginner in needlework, if he has such a desire.

It will not be possible to list all the products that are offered in stores for designing flower stands - they are too diverse. You can easily choose any option suitable for your case. Yes, and such “raw materials” are quite acceptable.

A bookcase or stand for indoor plants can be a good gift for an amateur florist. Especially if it's handmade. After all, by creating a thing on your own, you put a particle of your soul into it.

Home flower stands are a must if there are a lot of plants in the apartment. Thanks to design solutions, these devices are functional and beautiful. You can make them yourself, having at hand a minimum set of tools.

In order for the stands for indoor plants to be convenient, fit into the design of the room, and not interfere with free access to the windows, it is important to consider a number of criteria when choosing in an online store or when making it yourself. Take into account:

how many indoor plants are in the room;
lighting level - how far the window is, configurations and sizes;
weight and diameter of the flower pots themselves;
the direction of plant growth - some of them grow in breadth, while others increase only vertically, to the sides or hang down in lashes.

It is important to make such a plan for placing stands so that not a single plant is left without a sunny color. This takes into account that some plants are photophilous, that is, the sun's rays fall at a right angle, while others can grow in the shade of others.

There are also security requirements. No matter how modern the stand is, it is important that it gives reliable support to the flower. It is better to give preference to options whose ends are rounded, not sharp. This is especially true if there are small children or pets in the house.

Manufacturing rules

Manufacturing rules depend on the type of flower. Large stands are made for single flowers that do not like neighborhoods with other plants. Single stands are made in a round or oval form, stable or mobile (equipped with wheels to move around the apartment).

The manufacture of whatnots will take more time, however, in this case, the plants will be placed depending on the light-loving and craving for watering. Convenient for a small apartment, as they save space.

Table tops are also easy to make, they are suitable if there are 2-3 plants in the house that are not with a dense crown and are not prone to strong growth.

By placing plants at different levels on the countertop, you can ensure that each of them receives the necessary amount of light, it will be convenient to water them.

Vertical stands with planes of various sizes, popularly called towers, will also allow you to conveniently place your favorite flowers and save space. The advantage of such options is that you can additionally install rings under the pots. But proportionality is required, otherwise the tower will collapse under the weight of one side.

The slides resemble towers, but the pots are located here on vertical stripes. The slide can be easily pulled over if more light is needed. However, the design is unstable, so it is not suitable for families with small children.

DIY options

As an example, you can take one of the following options.

A-shaped

The shelf, in which the two sides are connected at the base, and below form a wide angle, is very popular both in the city and in summer cottages. The advantage of this option is that with the help of several racks you can put at least five flowers on one stand.

This model moves, so if the plants do not have enough light or winter has come and they need warming, then they are simply rearranged. The shelf is made quite simply, and you can use it not only to store flowers, but also to place shoes, like a stand during summer work.

For seedlings

Window flower stands for seedlings are convenient because of the large free space inside them. Directly the shelves are located inside the stand by levels. This makes it possible to store many plants, but small ones.

From pipes

Pipes are often used as a material for creating shelving. You can take the usual ones that remained after the repair, or those that were already in use, but only if there are no requirements for appearance. If the shelves are at home, then, of course, they choose beautiful, textured pipes, they can even be painted to decorate the room.

Simple

Such a rack can be made even by a person who is little familiar with the construction business. The peculiarity of the stand is that the shelves are located directly on the pipes, no cutouts are required.

dense shelf

The thick stand is stable and roomy. Pipes surround the shelves, they are inserted through special cuts. If you place the wheels at the bottom, then the shelf will become mobile.

With flying shelves

This type of shelf looks aesthetically pleasing, so it will fit into the design of the hallway, hall, children's room. The peculiarity of the stand is that the shelves are not located directly on the pipes, do not lie on them, but are attached through special supports. It seems that they literally fly over the structure. This type of stand goes well with flowers that have creepers.

Plug

It looks pretty simple, but it's not easy to make. The advantage is that only two types of metal elements are used to attach the frame. The shelves themselves are arranged either in a standard way, or as for a flying model.

wall

Four types of metal structures are used. The shelf is mounted on the wall. But in any case, you should not load it with heavy colors, no matter how high-quality the metal parts are.

wooden for bathroom flowers

A wooden shelf is suitable for a bathroom, but in order for it to last longer and not become a breeding ground for harmful bacteria in the room, you need to varnish it.

To create, you need self-tapping screws and any wooden plates that can support the weight of flower pots. Hooks are attached to the bottom of the shelves, on which you can hang beautiful accessories, or small flower pots.

From the stairs

In its usual form, it will be awkward to put a ladder shelf, in no case will the solution fit into the design of the home.

But if the stairs are ennobled, then it completely becomes a stylish stand for several flower pots.

First you need to sand it, and then remove the planks intended for walking. They are fixed inside the structure.

Sliding rack

It is quite difficult to create a sliding rack with your own hands. To do this, you need to cut out various square elements, connect them in the form of a snake. It is important that the structure does not settle after assembly (this happens when using wooden elements).

Corner semicircle

A corner stand in a semicircle, which is fixed on the wall, will save the usable space of the room. It will take several meters of MDF and a milling machine. Three elements are cut out: two sidewalls and a bottom, and shelves after. If you stick a tape on the ends of the product, then the stand will become more beautiful.

On belts

Shelf on the wall on the straps does not have much endurance. But it can become a stylish decoration of the interior of the room. To make it, you only need two boards and two belts. The shelf is simply placed on the belts, and they are fixed with self-tapping screws on the wall.

glass

The glass shelf will fit into the interior of any room. Glass strips are attached with wooden bars, you can make a flying version.

Combined

Combinations can be very different. Often made of snags and metal, wood and pipes. There are even options from glass bottles and ice cream sticks. The main thing is to take into account the requirements for sustainability.

driftwood theme

With the help of a stand made of snags, real works of art are made. The snags are fastened with four supports, using wooden shelves.

Floor stand on wheels

Making multi-tiered floor racks is not difficult. Standard option - as for stairs. Wheels make the shelf mobile. A high stand can also reach the ceiling, in which case all plants will be evenly lit by the sun's rays.

Hinged

The hinged shelf is made using ordinary wooden beams and several brackets. If you add chains, you get a stylish designer item to decorate the living room.

metal

Metal stands will withstand the heaviest plants. But for their manufacture, you will need special tools, which are not always available. Metal stands are made free-standing, as their large weight does not allow them to be hung from the wall.

Forged coasters

Forged are a real work of art. Usually they are also performed standing alone in order to draw attention to the flower as much as possible.

Whatnot

The flower rack resembles an ordinary staircase, only smaller. It is done using several building parts and shelves of various widths.

Decorative

Original and beautiful shelves are obtained using a variety of materials. It can be a dense fabric, pieces of plywood or MDF, glass bottles and much more. Decorative coasters are not always functional, but they will be just right to support one plant.

Spacer

Spacer requires a minimum of elements. Several shelves are attached to one metal line. Decorate the bathroom, suburban area.

Examples of the work of craftsmen

Popular are simple shelves made of wood, which are attached to ropes. A distinctive feature is the recesses for the size of each pot. Perfectly fit into eco or country design. In order to make a stand, you will need:

take three wooden shelves of the same size;
drill identical holes in them;
make beams or brackets;
fix the knots of the rope after leveling the boards.

Often, small shelves are used to decorate the house. The plus is that the length of the ropes can be adjusted, so put after as many wooden shelves as you like. You will need:

pick up several shelves and make 4 different holes in them;
pull with ropes and make knots for support;
connect the ropes at the top and fasten them.

You can decorate such an unusual piece of furniture with different details. For example, choose a thick beautiful rope, learn how to weave it in the macrame style. Or shade the brushes below, paint the planks themselves in different colors.

Garland coasters are in demand for decorating small modern rooms. They look great with high ceilings. The peculiarity is that the shelf is narrow, for one pot. Each board is made square, a circle is cut in the middle, four holes on the sides. Ropes are passed through them, fixed with knots. From above they are tied and fastened to the ceiling.

But the simplest option that will decorate any room is a floor stand for a single flower. It consists of a base, legs, thrust bearing and the rack itself. Any self-made shelf will cost significantly less than bought in a store.

In addition, the process is simple, so even a person who is little familiar with the nuances will cope with it.

pay attention to where the window sill is located - the shelves will increase its functionality, since you can put them directly on it;
take into account the amount of incoming light - if its minimum or illumination level varies greatly from the time of day, then vertically arranged variations of flower stands will do;
if they are assembled from improvised materials, then their quality is carefully evaluated - decrepit wooden planks, already used cables and ropes will not withstand the weight of the flowers and can collapse, thereby destroying expensive furniture or the floor;
choose the material of manufacture depending on the weight of the pots - they can be wooden, metal, from pipes, glass and others;
complete with interior items - decorate with laces, beads, paint shelves.

DIY flower stands will add charm to the room. And if you take into account the nuances, they will help reduce the time it takes the hostess to care for her favorite plants.

Flowers are an integral part of the interior in many apartments. Beautiful, interesting racks and pots for home plants help create an atmosphere of comfort. In stores, pots and coasters are often standard, if not tasteless, and at the same time expensive, but this accessory is a must for flower lovers. A beautiful do-it-yourself flower stand can make the interior more original and unusual.

In most cases, various metals, plastics or wood are used as the main materials. Do-it-yourself flower stand is easiest to make from wood. To process or trim a tree, you will need a minimum of tools, each of which is in almost every home. However, with prolonged contact with water, which is inevitable when caring for flowers, the tree may begin to rot or become moldy. To prevent this from happening, wooden surfaces can be coated with a waterproof varnish that serves as a protection against moisture. In addition, such surfaces are much easier to repaint if necessary.

The simplest option would be a floor wooden stand with square, rectangular or round wheels. The wheels are attached to the screws, thanks to them it will be easy to transport a heavy flower.

A multi-tiered structure is created using thin, securely fixed boards or metal rods. They are fixed vertically, roughly speaking, threading through several wooden shelves. Shelves on wooden slats are fastened with small metal corners. For metal, a different type of fastening is suitable - through holes are made under the shelf in the rails, always at the same height. A screw or screw is tightly screwed through the holes, which is tightened with a nut on the reverse side.

Metal is a rather demanding material; only welding is suitable for creating products from it, which makes it difficult to manufacture at home. Making a metal stand with your own hands is possible if you have a welding machine and the ability to use it. To do this, you need to create a drawing and calculate the attachment points. Most often, metal racks are made from thin rails. Pots are inserted from above into a rounded holder, they are fixed due to the fact that the holder has a smaller diameter. The mount should be on the top of the pot. Untreated metal is easily corroded.

To create small coasters, you can use thick metal wire. Wire products look very attractive and original in any interior, especially since today this material can be found in almost any color. Wire flower stands will withstand small planters, from which long stems will hang beautifully. The advantages are ease of manufacture, low weight, and, consequently, easy transportability. There will be no difficulty in moving flowers around the room. In addition, such flower stands are made hinged, suspended from walls or ceilings.

Plastic is much easier to mechanical impact than metal, it does not deteriorate from water and is easily transported. But there are also a number of significant drawbacks, such as insufficient strength and the inability to withstand too heavy pots. Some people are dismissive of this material because of its non-environmental friendliness. When heated in the sun, plastic can release small amounts of harmful substances.

It is not difficult to create an interior item from plastic parts. Often in unusual interiors ordinary PVC pipes are used, they can be fastened and directed in any direction with the help of special fasteners and corners, also in the form of a curved pipe. They are used to create a variety of coasters that serve for clothes, books, pencils, shoes, including flowers.

Wooden

metal

PVC pipes

We decide on the design and location

The design is selected completely individually depending on personal preferences. Most often, the choice of the shape and material of the stand directly depends on the style of the interior:

In a traditional interior, in Provence style, wooden products will look better.
Absolutely any material can be used in a loft or grunge design.
Modern style, eclecticism or minimalism will be ideally combined with metal details.

A flower stand is often used to save space and convenience, because when the entire window sill is filled with flower pots, it is simply inconvenient to use it. There are two main types of stands, depending on the location: floor, wall. Wall-mounted ones are more convenient in terms of saving space, hanging plants like vines, wild grapes or hops look beautiful on them. Also, sometimes the stands are attached to the ceiling, but such structures are extremely non-functional in terms of movement.

In a boring, monophonic interior, colored, decorated coasters with various patterns will look interesting. In addition, the flower stand can be additionally decorated with coarse craft ropes or multi-colored threads, pendants. The flowers themselves are also an integral, and, perhaps, the main decoration of the stand.

The location of floor stands for flowers depends on several factors. First of all, comfortable climatic conditions for plants are important. A sufficient amount of sunlight should fall on them, you should not place the flowers too close to the battery, they will be uncomfortable at high temperatures. The best solution would be small stands that can be placed on the windowsill. This will save space and add zest. However, this option will not work if it blows from the windows in winter. In this case, for the cold season, the flowers should be removed from the window. Do-it-yourself flower stand on the windowsill can be done quite quickly due to the small amount of work. In addition, it becomes possible to choose the ideal size and width (depending on the window sill). With a compact size and light weight, it will be easy to move it to another part of the room during frosts.

Large-sized structures in a relatively small room are best placed in the corners or along the walls, so they will take up less functional space. Well, mounted ones do not require a lot of space at all. The main thing is to hang them not over the bed and closer to the window.

Preparing the necessary tools

When making a flower stand from any material, you will need basic drawing tools, such as a pencil, a ruler (preferably a tape measure). To check the evenness of a surface, such as a shelf, a level is used horizontally, and a plumb line is used vertically. Depending on the material used for the manufacture of stands, a set of tools is selected:

Wood. To create the simplest wooden flower stand with your own hands, you will need a minimum of tools: a hammer with nails or a drill. A circular (circular) saw is used to shape, most often rounded. Using a circular saw, you can cut a hole into which the planter will be inserted. A planer will be required exclusively for grinding, in the event that the tree was unprocessed. The jigsaw allows you to cut out small details, decorations, but this will take a lot of time and patience. To get the job done quickly and effortlessly, it is better to use electrical appliances. Their disadvantage is that they are not always available at home, and buying them at a time is quite expensive. At home, it is easiest to work with wood.
Metal. Working with metal requires serious training, including the availability of specialized tools. The fastening of parts is carried out using a welding machine. To cut the necessary parts, a cutter, jigsaw or file is used, sometimes scissors for cutting metal. Drills and an electric drill will be needed to secure the structural parts. All tools must be made of durable stainless steel. When processing metal, it is important to observe safety precautions; welding is carried out only in a helmet. Working with wire is quite simple, if desired, it can be bent with bare hands. However, it is much easier, especially when working with a large diameter, to use pliers, you will also need wire cutters or scissors for cutting metal.
Plastic is a fairly easy-to-deform material. Nippers, scissors or a hacksaw, a drill - this is the minimum required. To soften the plastic, you need to heat it, which can be done with a conventional hair dryer or gas burner. If the option of creating a stand from PVC pipes is chosen, then other tools may not be needed with super-strong glue.

To work with metal, you need a welding machine

Manufacturing process depending on the type of flower stand

corner

Corner flower stands have a triangular base shape. It is important to fix the parts clearly at an angle of 90 °, otherwise the back wall will not stand up straight. The design may have back walls on which everything else will be attached, or it may simply be in the form of shelves mounted on the wall. Shelves for the stand are almost always made of wood, regardless of the main material of construction. Shelves can be semicircular, have the shape of a square with a protruding corner, a triangle, or consist of two interlocking boards forming a concave corner. Cut lines are drawn on the workpiece, the required shape is cut out with a circular saw. The back of the wooden product is fastened with corners. Further, the parts are fastened with nails or screws, while it is necessary to accurately check the level.

Whatnot

The essence of the bookcase is multi-tiered, in most cases the shelves are mounted exactly one above the other. For this, the construction of PVC pipes or metal rails is ideal. Below they can be supplemented with wheels.

There are also more original designs of flower stands: the product does not have to have two walls or symmetrical supports. You can take a wooden beam, after fixing it on a heavy base for balance. And it is asymmetrical to attach shelves of different lengths at different heights to it.

Hinged

A hinged whatnot can be created using ordinary coarse ropes. 4 holes are made in the boards, located in the corners. From top to bottom, two ropes are threaded through them, on the lower rail the rope is inserted into the adjacent hole (on the short side) and is also threaded up. From above, each rope is tightly tied and fixed on hooks twisting into the ceiling or wall. Often, light structures made of wires or ropes with a flower are attached to the ceiling or wall.

Large-sized hinged stands are made flat and have a mesh structure (the design is crosswise). It is recommended to fix each detail of the back wall in several places on the wall. Shelves or pots with metal fasteners are already hung on top of this base.

Decor methods

There are many ways to decorate self-made flower stands:

The easiest way to decorate is to add color, you can decorate both the design and the pots themselves. Painting is recommended to be done using stencils, so the drawing will turn out more accurately. With a high degree of skill, wood and metal carving is carried out, metal slats are made in an interesting curved shape, decorated with curls and other small details. It is easy to make the interior visually richer by covering metal and plastic with gold or other paint with a metallic tint. This is especially true for plastic, which in its original form is not particularly attractive and may look trite sloppy.
The details of the coaster will look more interesting if they are tied with coarse thread or upholstered with canvas. A similar design is suitable for an unusual ethnic interior, loft, boho or country style.
Stands look amazing, in which ordinary wooden boxes for vegetables are used instead of shelves. You just need to go through them with a planer, paint and the original piece of decor from unnecessary trash is ready.
On any materials, the effect of antiquity, which is created by two layers of paints, looks amazing. The base color is usually chosen darker; all elements are thoroughly painted over with it. After drying, a light paint is applied with a coarse brush, most often white or gray. Smears should be light (it is recommended to dilute the paint a little with water) so that not the entire surface is stained. To create this effect on metal or plastic, a porous sponge is used instead of a brush. It should feel like the top layer of paint has come off over time.
An easy way to create accents on rails is to install additional lighting. Neon, LED strips, miniature paper lanterns, multi-colored light bulbs, garlands - the choice is huge. In winter, in conditions of poor natural light, it is recommended to install special fluorescent lamps or phytolamps for plants.
Small elements of the stand (wooden shelves, flower pots) are often decorated using the decoupage technique. A picture or pattern is cut out of napkins: roses, cupids, retro-style images, bright inscriptions - it can be anything. With the help of glue (even PVA or a glue stick will do), the napkin is slightly soaked and applied to the surface. A small amount of glue should also be applied to the surface, the napkin should be smoothed and left to dry. Literally after 10 minutes, the surface can be varnished, so the pattern will remain for many years.

A home plant or flower always looks beautiful in the interior, pleasing to the eye all year round. But often they take up too much useful space. To avoid such a problem, many install flower stands on which you can install from a couple to several dozen flower pots. But in stores you can rarely find beautiful models of coasters that match the interior in style and dimensions. But making a flower stand with your own hands is quite simple. Moreover, to create wooden structures, you will need tools that everyone has at home. At the end of the work comes the most interesting stage - painting and decorating.

Video

General issues

Indoor plants are those living interior decorations, without which it is difficult to create a really cozy apartment or house. Enthusiastic flower growers, accustomed to replenishing their collection with new, unusual specimens, soon begin to notice that for some reason there is a catastrophic lack of space for their beloved green friends. However, these pets require a well-lit, cozy, comfortable place, and in this case, a practical do-it-yourself flower stand from improvised material saves the situation. An unusual item that cannot be found in any store can itself become a decoration of a room or garden, and will allow you to successfully “house” a large green “army”.

Varieties of flower stands

Such a design is able to solve several problems at the same time: provide indoor plants with sufficient lighting, but at the same time not take away a lot of “precious” space from the room, enliven, transform the interior. Stands can be made floor, wall, table, located on the windowsills, but only the owners can choose the ideal model based on their preferences, the features of the rooms. Availability of free space is another criterion.

Floor structures

In this case, there are no restrictions on fantasy. Stands can be high, low, narrow or wide. Popular places for flowers are multi-tiered shelves, original ladders, single racks designed for large plants. Multi-level designs are convenient because they allow different plants to feel perfect: the most light-loving ones are placed at the very top, those that are used to partial shade are placed lower.

The same floor stands include the original high, but narrow, mini-racks, attached to the floor and ceiling at the same time. This solution is now very popular, as it makes it possible to place many flowers in a space, but save space in small apartments. Each plant will not lack freedom.

Wall, desktop

This kind of objects allows you to "fill" the empty part of the wall with flowers. You can make a stand that is attached to another surface - to a section of the ceiling located near the wall. This type of product is optimal for ampelous plants. Thickets such structures can be seen on terraces or balconies.

Long and narrow stand-boxes will be a salvation for the same window sills. Small tabletop items placed on furniture in close proximity to the window opening are another way to successfully accommodate a large number of plants that prefer light.

improvised materials

There is quite a lot of room for activity, since these furnishings are often still compact and do not differ in large dimensions. Do-it-yourself racks are usually made from:

gypsum;
wood, chipboard, plywood;
metal profile;
plastic (and the same containers);
wires;
glass;
bamboo, vines, rattan.

Often materials are combined. The most popular combination of metal with wood or glass, although the latter is much more difficult to process. Frames for large plants require the use of durable metal, small light flowers can withstand even thick wire without problems.

What can you do yourself?

Do-it-yourself flower stand from improvised material is an operation that can be "cranked" in a few hours. The main condition is the availability of a tool and emergency supplies, where something useful for such an activity can be found. There are completely simple designs, for the manufacture of which you do not have to empty either your wallet or card.

Construction from boxes

In this case, you don't have to do anything. Several boxes of any size (same or different) are painted in the appropriate color. After the composition dries, the objects are placed on top of each other in a random order (large ones from below, smaller ones from above).

For greater reliability, all elements are fastened with self-tapping screws. Pots of flowers are placed in the resulting niches and at the very top of the structure. Such a wall-floor stand will take a minimum of time, but it will look quite interesting.

Pallet flower stand

This version of the stand is more suitable for giving, however, after careful processing of pallets, it can become “fit” for an apartment. Even one pallet is suitable here, which is placed vertically, with the help of self-tapping screws, cross-shelves for flowers are screwed to it.

The wood is treated with antiseptic impregnation, sanded with sandpaper, covered with stain or paint, and several layers of varnish are applied. Such structures can not only be placed on the floor, but also hung on the wall.

Elementary wooden stand

This is the easiest way to get a single potted flower stand. For the manufacture you will need a drill, screwdriver, chisel. And materials:

wood (timber, boards, chipboard);
PVA glue;
edge.

First, three parts are cut out - the base of the structure, the leg and the shelf for the flower pot. In order for the stand to stand securely on the floor, the minimum diameter of the base of the stand must be at least 30 cm.

A groove is made in it and a shelf for a vertical element. The leg and the hole are smeared with glue, connected, and the bottom of the product is fixed with self-tapping screws. The shelf is fixed in the same way. The final stages are sanding, gluing the edges and applying several layers of varnish, each of which must dry completely.

Stand-well or woodpile

The easiest option, for its manufacture, the following materials are needed:

bushings left over from paper towels (12-16 pieces);
PVA glue;
paint: acrylic or oil.

A “woodpile” is folded from the bushings: the rows of elements alternate, each of them is attached to each other with glue. After the composition dries, the resulting well is covered with paint.

Tree trunk for the benefit of flowers

Those who have become an adherent of eco-style will love this natural coaster, made from a tree trunk. Its length is 100-150 cm, but the final decision is up to the owners of the future model.

All branches are cut off from the trunk with a grinder, getting a cylinder.
15-20 cm recede from its ends, then cut down to half the diameter of the tree.
A hole is drilled between them. After processing the wood, pots with indoor flowers are placed in the resulting stand.

Such a "flowering tree" will look spectacular in any room - both in the country and in a city apartment.

Large wooden candlestick

In this case, you will have to look for two blanks - one wide for cuts, the other for the candlestick itself. For a stand, that section (or several) of the tree where the branching begins will be ideal.

The bottom of the second workpiece is sawn off so that a flat and stable surface is obtained.
Several cuts are made from a wide log - according to the number of branches, the width of these disks is 2, 3 or 4 cm.
The top of the branches is cut parallel to the base of the candlestick, then discs are attached to it with self-tapping screws.

For a longer service life, the wood is pre-treated with an antiseptic. The finished product can be painted, varnished or left without any protective and decorative coating.

Suspended plywood structure

Instead of plywood, you can take ordinary boards, trimming a chipboard sheet. You will also need a strong rope - two identical segments.

Several shelves are cut out of a sheet of plywood. Several holes are cut out in each blank - wide for fixing flower pots, and small (at the corners) for threading a rope, so their diameters must match. The last should be four - one for each corner.
Ropes are threaded through the corner holes, on which knots are tied for secure fixation at the bottom of the shelves.
A hole is drilled in the wall for a hook. The stand is fixed on it with the help of a reliable knot assembled from 4 rope ends, its horizontalness is checked.

A large number of "floors" will make the structure very heavy, so an overly complex stand may not be very reliable.

Rack of plastic bottles

For this masterpiece you will need a large set consisting of:

14 milk plastic bottles;
golden spray paint;
decor - jewelry, beads, beads;
PVA glue;
adhesive tape;
building cord;
toilet paper roll;
napkin packaging.

The process itself looks like this:

First, the washed and dried bottles (directly with labels) are glued together in pairs with adhesive tape.
Put one double element in the center. Others fasten around him.
The whole figure is wrapped with adhesive tape until all visible defects disappear - bumps, folds.
After applying glue, wrap the future stand with napkins, then with several layers (2-3 - at least) of toilet paper. Each of them is given time to dry.
For decoration use a cord. Beads and any other decorations are glued to the resulting pattern. A cheap alternative is cereals (millet, buckwheat, rice) or peas.
Paint is applied to the resulting pattern from a spray can.

Do-it-yourself flower stand from improvised material can be made from familiar things. Bicycles, chairs and stools often act as such a piece of furniture.

The following video will tell you how to make a ladder stand:

Fresh flowers decorate houses and yards, bring joy to housewives. Flower stands will help to place the pots in the right place. Make a useful thing with your own hands and surprise guests with originality. Such a stand is more budgetary than a store-bought one, and the appearance can be anything.

Types of stands

You can make a stand for any flowers yourself. Products differ in functionality and method of application. Before starting work, you should decide on the type of stand.

floor standing

Designed for large flowerpots and pots. Usually made from durable materials. Such structures can be used as an original screen for zoning a room.

The design can be multi-tiered or designed for one flower.

wall

The best solution for freeing up space. Small or medium flower pots are usually placed on such a stand. Designs allow you to hide wall defects. For manufacturing, metal or wire is often used. Can be placed in a corner for extra space.

Mounted

They are a variation of the previous version. The pot looks spectacular and stylish. The main disadvantage is that it is problematic to move the stand from place to place; holes are made for mounting in the wall.

Most often, the design is used on a balcony or terrace.

The structures are presented in the form of slides, whatnots and racks, they are stationary. Used for ampelous flowers with large, hanging leaves. They can be used in an apartment, but more often they serve as a garden decoration. Using such a stand, you can create an additional shadow or compensate for the small area of \u200b\u200bthe flower bed.

Custom designs

These coasters are made by hand. Outwardly, they can resemble some interior items, transport, benches and much more. Decorated with brilliant colors of gold, copper, silver. Forged products or stands made of welding wire look very impressive and expensive.

Can be installed both indoors and in the garden. Usually coasters are used for small pots.

Outdoor coasters must meet special requirements. The material must be strong, durable and wear resistant. Usually, original forms or multi-tiered structures made of metal, wire, forging are used. Home stands can be of any kind. Usually used when growing light-loving plants. Such designs are designed for small and medium pots. Install home coasters on the windowsill, balcony or hang on the wall. If the size of the room allows, then floor views can be used.

Tools and materials

The stand can be made from completely different materials. They use metal and wire, wood, glass, plaster, plastic bottles and much more. Metal structures are durable and can withstand heavy loads. The stand requires special care, otherwise it may begin to rust.

Wooden products are very popular. It is better to cover the stand with varnish. Frequent water ingress when watering plants can lead to swelling and rotting. Working with glass at home is quite difficult, so it is often used as an additional material.

Glass shelves on a metal or wooden frame look great.

The combination of materials is used in order to combine practicality and beauty. The frame and shelves for large flowers are made from the most durable materials. Shelves for large pots can be made from the same. Places for small and light pots can be made from thinner glass or wire.

The required set of tools directly depends on the selected material. For metal or wire products, cold welding is required. When working with plywood, take a screwdriver, drill and saw. If you use improvised materials (plastic bottles), then construction tools will not be needed at all.

Manufacturing methods

With your own hands, you can make a functional and attractive stand for your favorite flowers. With the help of the design, you can decorate a window or wall. If a homemade stand will stand on the windowsill, then be sure to make preliminary measurements. Manufacturing options depend on the selected material. Some coasters will require improvised materials and a small amount of time. For the manufacture of complex structures, you will need special skills in working with tools.

metal

A simple and convenient option looks like several parallelepipeds with 2 common faces. The work is laborious and requires special skills. It is better if a man is engaged in manufacturing. Pre-draw the drawing and mark all dimensions. For vertical supports, you need to make 4 equal segments, and for horizontal edges - 8. From short parts, you need to make squares or rhombuses by welding. It is important that they are the same, otherwise the stand will warp. Long racks need to connect geometric shapes. Then proceed like this.

Weld a transverse metal bar between the uprights. It should be at the height of the next shelf.
Make a metal rectangle. Dimensions are easy to calculate. The width should correspond to the distance between the vertical parts of the high stand, and the length is calculated from the previous measurement.
Cut 8 more small and 4 large parts. Repeat procedure. Connect 2 tiers together by welding.
Depending on the needs, you can make as many blanks as you want.

From plastic pipes

The flower stand is quite attractive and easy to make. You can make crafts with your kids. The product is appropriate not only in the apartment, but also in the garden. It is necessary to take plastic pipes, lining trim, 2 pieces of a regular hose, self-tapping screws (6 pcs.) And a screwdriver. Act like this.

You need to make rings. Twist the pipe in the form of a spiral so that 2 hoops are formed. To facilitate the task, you can use an empty barrel.
Remove the spiral from the mold and cut. You should get 2 rings.
Connect the ends with a hose.
On one ring, make 3 marks at an angle of 120 °. Insert self-tapping screws into the holes.
Make similar marks on the other ring.
The legs are made from pipes. Cut it into 3 pieces of 40 cm in length.
From scraps, make 3 corks and insert them into the legs.
At the final stage, you need to collect all the details. Bend the first ring under the legs and screw with a screwdriver to each of them. On the back of the pipes, put on the second ring and screw it to the legs with self-tapping screws.

From plywood

The classic stand is well suited for apartments and houses. You need to take a chipboard or PVC shelf, plywood, a thick rope, screws, plugs, paints and varnish for decoration, a screwdriver, a drill, a saw, a hammer and a screwdriver. For comfortable work, a level, tape measure, ruler and pencil are useful. Make a product like this.

Prepare material. Calculate the size based on the free space. The width should match the size of the pot. Additional bars in the middle will help make the distance between the shelves the same.
Drill 2 holes in each shelf with a drill. They need to be placed in parallel. The size of the hole must be such that a thick rope can pass freely.
Pass the rope through all the holes. Form a hanging loop at the top, and make a secure knot at the bottom.
Install the stand. Drill a hole in the wall at the desired location, install the mount. Fasten the stand firmly. The wall design is ideal for indoor flowers.

From wire

Even a woman can make a structure, the main thing is to have experience in handling cold welding. For work, use a welding wire with a diameter of 1 cm. Stock up on cold forging tools and a hammer (800 g).

Draw a sketch, break it down into simple details. Calculate all sizes. Be sure to consider the diameter of round blanks for pots.
First of all, make a rack and stands. Duplicate the drawn details with wire and fix with cold welding.
Make decorative items. It can be various curls, spirals, leaves and flowers. If desired, you can use ready-made metal molds to create these parts. It is enough just to drive the wire with a hammer into the template and get the desired element.
Attach all decorative details to the main homemade structure using cold welding.

from driftwood

Lovers of natural materials can make a stand out of wood. You can use a felled trunk or branch, depending on the desired size. Act like this.

Cut off the extra knots from the driftwood to make a cylinder. It is convenient to perform the procedure with a grinder.
Step back from the ends somewhere ¼ of the total diameter of the deck. Make deep cuts to the depth of the flower pot.
Saw or gouge a piece of wood between cuts. Set up the pot. This floor stand looks great in the interior.

plaster

It is easy to make a product from such material, it does not take much time. Gypsum is durable and versatile. The main thing is to purchase or make a form for the stand. It is better to put the product indoors and handle it with care. As a form, you can use a suitable flower pot. Pour the gypsum mixture into the container, and place another pot on top. Inside you will get a hole into which you can insert a flower. Work with the solution like this.

Pour water into the container and add gypsum in a ratio of 10: 6, respectively.
To all components, add 1 part of slaked lime. The mixture will be more elastic in the liquid state and more durable after drying. The component can be found at any hardware store.
Pour the solution into the mold and wait for it to dry. The exact time is indicated in the instructions, on average it will take 24-48 hours.
Decorate the stand. If desired, you can make gypsum already colored. To do this, add gouache to the water while mixing.

From bottles

Such a stand can be placed even in the garden, it is not afraid of bad weather. A product from improvised materials can be made with children. Take scotch tape, PVA glue, a roll of toilet paper and a package of paper napkins, 14 plastic milk bottles, a skein of medium-thick twisted lace. You also need to take thick cardboard, spray paint with gilding and beads or beads. Make a stand like this.

Tape 12 bottles in 6 pairs.
Use 3 pairs to make the bottom. Fold the bottles in the form of a flower and fix with tape. Place 1 bottle in the middle so that the neck is 5 cm higher than all the bottles.
Make another flower from 3 pairs of bottles, but without filling the middle.
Put the second flower on the bottom of the neck of the bottle so that the middle wide part acts as a rod.
Wrap the structure with toilet paper, pre-lubricating it with PVA.
Lay several layers of napkins in the same way. After each layer, you need to wait for the glue to dry.
Leave the design for 24 hours.
Make an ornament in the form of flowers or something similar on the surface.
Make leaves from a sheet of cardboard, glue to the product.
Decorate the flower stand to your liking. Finally, cover everything with a layer of gold paint.