Do-it-yourself ottoman from a box. How to make a comfortable and original bean bag chair with your own hands. Pouf from an old stool

An ottoman, of course, is a necessary thing in the house. But there is no particular need to buy it, since it is really not difficult to make it yourself. For this procedure, you can use a variety of home materials and some tools. To find out how to make a round ottoman with your own hands, it is worth considering some practical recommendations from experienced specialists, studying which you can come to the conclusion that anyone can do it.

The network has a huge number of options for how you can make a pouf with your own hands. Thanks to independent actions, you can save a significant amount of money and use scrap materials. The most popular methods are as follows:

seat made of plastic bottles;
bucket ottoman;
from the coil from the cable.

Pouf made of plastic bottles

The option from plastic bottles is quite popular, since they are in almost every home, and there will be no problems with the source material. In addition, the bottles are quite strong and durable. To make such an ottoman in the hallway, you will also need scotch tape, foam rubber, thick cardboard or plywood, and upholstery fabric.

It is important that the bottles are the same in size and shape as well as in density. Their number depends on how voluminous the pouf you want to make. But remember that the larger the surface area of the top, the stronger the seat.

Fold the bottles upside down and tape them tightly with duct tape. Using the obtained diameter, cut four identical circles out of cardboard or plywood. Two will go to the lid and two will go to the bottom. This will make the structure more durable. They also need to be attached with tape. This is the blank.

Bottles are connected to cartons with tape

Now you need to make it soft. To do this, cut out a sheet of foam rubber of the required size and wrap the side of the ottoman. For the top, cut out a circle. Foam rubber can be replaced with padding polyester. The thicker the layer, the better. Glue the material to the workpiece.

The surface of the resulting frame is covered with padding polyester or foam rubber

The seat can be trimmed from fabric, leatherette, or decorated with ruffles and applique. The knitted cover will make the ottoman unique. By using your imagination, you can create what you like best.

Another option is 2 large 10 liter plastic bottles. At one (bottom), you need to cut off the neck and insert the other into it. In the same way, cover with soft material and put on a cover.

An ottoman from a plastic bottle Cut off one bottle and combine with the second For the base and seat, cut out circles from chipboard
Foam rubber for our ottoman We fix the foam rubber on the seat We fix the foam rubber on the side surface
A circle made of leatherette is suitable for the bottom.Make a cover from the material you like and pull it over the ottoman

Out of the bucket

Bucket ottoman

You can also make a pouf with your own hands from inventory that is no longer used for its intended purpose. This could be, for example, an old leaking bucket. The principle is the same. Turn the bucket upside down, wrap it on the sides with batting or padding polyester.

We glue the foam rubber to the sides

Place the matching round model on top. The soft material can be glued on for a more secure grip.

We glue the foam rubber to the lid

Remove the handles from the buckets in advance, otherwise they will get in the way.

We sew a cover

Sew a cover out of a soft-touch material and slide it over the seat.

Put on the cover

A similar design is obtained if you use a cable coil. In a word, if you want to make a round original ottoman with your own hands, you can take any blank and cover it with soft material. A piece of furniture made in this way will not only free your home from rubbish, but also save money.

Chipboard and plywood

Cylindrical ottoman

And below it is shown step by step how to make an ottoman from scratch, using only the right materials and your own craftsmanship. Such a product will look beautiful and noble in a city apartment. So, you will need:

Chipboard with a thickness of about 18 mm;
plywood (3 mm);
wooden blocks for legs;
self-tapping screws;
synthetic winterizer;
upholstery fabric;
staples, glue and thread.

First you need to cut two identical circles. They will serve as the base and top of the pouf.

We cut out circles of chipboard of the required size and timber details

Then put the bars of the required height between them and attach with self-tapping screws at the same distance.

We connect the circles and the timber with self-tapping screws into the frame

When the frame is ready, cut a sheet of plywood to sheathe the side of the product with it.

Along the perimeter, we fix the chipboard sheet to the frame, making the wall

Using a stapler, nail the strip at the top and bottom to the chipboard.

Fully anchored wall

Now you can glue the workpiece with soft material. The top layer should be thick in order to sit comfortably on the pouf. 5 centimeters will be enough.

Fastening foam rubber and padding polyester

Sew a cover from any upholstery material. It can be eco-leather, dense fabric.

Finished cover

You can attach it to the frame with staples or glue.

We put on the cover and fix it from below with a stapler or nails

If desired, make an ottoman with legs.

We fix the legs

As you can see, making such simple home furniture is not difficult at all.

Ready product

This requires only a little ingenuity, materials and tools at hand, and a suitable idea. Considering how much ready-made furniture costs in stores, you will understand how profitable it is to be able to do something with your own hands. In addition, you can be truly proud of your poufs, because you have invested not only work in them, but also your soul.

When there is a desire to add something new to the interior or update the style, additional furniture attributes will help you. For example, any person can make an ottoman with his own hands - both an experienced craftsman and a beginner in this field.

Poufs are popular for a reason, because they can be used as a chair, table or as a footrest.

Poufs are popular for a reason, because they can be used as a chair, table or as a footrest. Plus, they take up little space, which is a huge plus for homes with limited space.

You are not limited in the choice of shape, parameters and raw materials.

Handmade ottomans have many advantages: you are not limited in the choice of shape, parameters and raw materials. To create an ottoman, you can use any materials at hand and it will not require large expenses, or it will cost you free at all.

Handmade ottomans have many advantages

Anyone can make an ottoman with their own hands, regardless of the level of skill. Some of the available models will be plastic bottles or tires. With a little more effort, you can make a plank pouf. And if you have skills in the field of carpentry, you can easily make a wooden pouf with drawers. Having experience in cutting and sewing, you can create a unique product of any shape and model.

According to the instructions, you will receive a high-quality, original piece of furniture that will serve you for a long time.

A pouf bag that will delight children will be original and simple enough to make. To create it, you need to sew a bag with a lining and stuff it with polystyrene foam - it is sold in many building supermarkets.

Having experience in cutting and sewing, you can create a unique product of any shape and model.

In any case, the main thing is to patiently, slowly follow each step, according to the instructions, then you will receive a high-quality, original piece of furniture that will serve you for a long time.

Anyone can make an ottoman with their own hands, regardless of the level of skill.

Several master classes on creating poufs from improvised raw materials

A pouf made of plastic bottles.

Everyone can make it, for this take:

plastic bottles, with a volume of 1.5-2 liters;
thick cardboard (packaging from equipment is suitable);
foam rubber;
upholstery fabric;
scissors;
thread, needle;
Scotch;
glue.

When the ottoman is ready, the hole can be sewn up tightly or a zipper can be sewn in its place.

Note: on each bottle, the cap should be screwed tight. Secure the container with each other with tape, place it on the first circle so that it completely occupies its space. Place the second circle on top, make sure that the elements are securely, evenly fixed.

In any case, the main thing is to patiently, slowly carry out each step.

Next, start finishing the product - cut out two round and one rectangular parts from foam rubber, be sure to leave a margin for seam allowances. Use strong stitches to join them together. Instead of foam rubber, you can use a synthetic winterizer, insulation or dense fabric folded in several layers.

Anyone can make an ottoman with his own hands - both an experienced craftsman and a beginner in this field.

Some of the available models will be plastic bottles or tires.

DIY ottoman from an old bucket.

To create it, you will need the following materials and tools:

jute rope;
construction glue gun;
cardboard;
upholstery fabric;
microfiber;
stapler;
large button.

Remove the handle from the bucket, put it upside down and wind the rope tightly in a circle. In order for it to hold well, each stitch must be planted on glue.

Instead of foam rubber, you can use a synthetic winterizer, insulation or dense fabric folded in several layers.

When the whole bucket is wrapped in rope, proceed to making the pouf seat. Use thick cardboard to make a circle that matches the diameter of the bucket. Prepare a circle out of the fabric, but 10 centimeters larger. Connect the fabric and cardboard with the button in the center. Shape the microfiber into a tube, wind it around the button between the fabric and the cardboard, fixing it with a glue gun. Fill the cardboard base to the brim with straws. The top fabric with a stapler should be fixed to the back of the cardboard. Now glue the piece to the base and work on the ottoman is complete.

First, you need to cut out two equal round parts (or squares if you want to get a square ottoman) of a suitable size - this will be the top and bottom of the ottoman.

A tire pouf is a great idea for a summer cottage or a living room.

Prepare the following materials and tools:

old tire;
twine (at least 20 meters long);
self-tapping screws;
glue gun;
plywood sheet 3-5 millimeters thick;
jigsaw;
electric drill.

First, you should measure the inner diameter of the tire until it thickens, divide this value in half and add one and a half centimeters to the result - you got the radius of the desired circle.

You can also add a strap, thanks to which it becomes possible to easily move the product.

Draw it on a piece of plywood, cut it out with a jigsaw. You should make two circles - on the seat and the bottom of the ottoman. Then drill holes in the tire and plywood, fasten the parts together with self-tapping screws.

Now you can glue the rope to the tire. To give the piece a distinctive pattern, start at the center of the seat, laying the twine with a snail.

The top fabric with a stapler should be fixed to the back of the cardboard.

Use transparent, fast drying, high strength adhesive.

When the top of the pouf is completely pasted over - proceed to the sides of the tire. To make the string easier to attach, turn the product upside down. After the first round, let the glue dry well to avoid the rope slipping.

Make a case for an ottoman according to the above scheme.

Note: do not rush, apply a lot of glue, process the future pouf circle by circle. It is better if you work together - one will make sure that the rope falls without gaps, and the other will continue to glue. Working on such a pouf on your own, you can easily allow the formation of gaps, possibly displacement of the twine from the surface of the tire.

When the glue dries well, cover the finished pouf with clear varnish.

You can decorate the product with legs or wheels.

For decoration, attach buttons, rhinestones or a border to the seams.

How to make an ottoman quickly without patterns.

For work, prepare:

the cloth;
stuffing material;
scissors;
needle, thread;
centimeter tape.

Prepare two identical round elements from the fabric, the parameters of which are equal to the top and bottom of the product. Set aside a few extra centimeters for the seams.

First, you should measure the inner diameter of the tire until it thickens.

Then cut out two equal rectangles - their width is the height of the ottoman, the length is half the circumference of the upper and lower zones.

Seams can be decorated with ribbons, borders.

Place seams on the resulting rectangular elements from one edge so that they form a long ribbon.

Then you need to sweep the first circle to it, sew along the seam. Then also do with the next circle. Seams can be decorated with ribbons, borders.

You should not rush, apply a lot of glue, process the future pouf circle by circle.

So, without wasting time on patterns, you can make a cover for a pouf. A variety of materials can be used as a filler. To avoid eye-catching stuffing opening, place it at the bottom of the product. When the ottoman is ready, the hole can be sewn up tightly or a zipper can be sewn in its place.

Following this description, you can build an ottoman-cube.

Following this description, you can build an ottoman-cube. The only difference is that all the parts should be made square, and there are four of them in the side parts. In order for the product to keep its shape better, use dense fabrics, and choose a synthetic winterizer or foam rubber as a filler.

In order for the product to keep its shape better, use dense fabrics, and choose a synthetic winterizer or foam rubber as a filler.

There is a whole lot of available, unusual ideas on how to make an ottoman with your own hands, do not be afraid to fantasize and experiment.

VIDEO: How to make a round ottoman with your own hands

How to make an ottoman with your own hands without throwing money away? Of course, you can buy it in a furniture store, but looking at the cost of a simple chipboard product, there is a desire to do crafts at home. If we consider furniture sets in general, then most of them refer to rather complex structures.

Experienced craftsmen can do something from this list with their own hands, and only an ottoman is made without special skills and knowledge from improvised means. A practical thing will turn out when a durable and high-quality upholstery fabric is chosen that can be wiped, cleaned, washed.

Such materials include leather or upholstery fabrics sold in specialized stores. It remains only to look at the step-by-step instructions for making ottomans of various shapes.

So:

An ottoman for seating several people is comparable in height to an armchair and looks more like a soft bench... For the home, such a model is inconvenient, and is not needed, but in the fitting and waiting areas it is very relevant.
An ottoman in addition to something with a specific height... From the definition itself, it becomes clear that it does not act as an independent product, but serves as an application. Models barely raised above the floor are not intended for sitting on them, but are used as footrests for adults. Children love these things in miniature and are happy to use them in their games.
Complementing chairs, sofas, beds, moving under the table or being a component in a non-standard combination (a beach cabin with a pouf), ottomans firmly occupy a niche in furniture showrooms. We can say more, there is a fashion for designer items that make the interior fashionable, complementing it.
The video in this article introduces poufs with advanced features. Watching it, you recall the plot of the film, when “with a slight movement of the hand, the trousers turn into shorts”, and here the ottoman is transformed into a full-fledged chair with a table, a bed with a lamp stand and other necessary items, while taking up a minimum of space.

Before you start making an ottoman with your own hands, you need to have an idea of this seemingly unpretentious furniture family.

So, poufs are classified according to materials, design, functions and shapes:

Textiles, leather are used on soft products... It is pleasant to throw your legs on the ottoman knitted with your own hands, and when the dimensions allow, then fall apart on it.
Rigid ottoman structures are made of rattan, wood, often varnished, bark of cork trees... Hard ottomans, made by hand, are not very suitable for long-term sitting, but they bring liveliness and intrigue to the interior.

Attention: The ottoman unambiguously refers to the necessary thing, and its need is felt when entering the house, more precisely, into the hallway.

How to make, sew, knit and which design of an ottoman to choose is not an easy task. Ottomans can be with exposed frames of steel pipes or wood.
The ottoman can have a closed frame, and the legs are hidden under the ruffles of the decorative skirt. Such products are popular with the British and Americans.
Ottoman with barely visible legs when copying a chair without armrests and backrests.
DIY ottoman with a back- not only a comfortable chair for members of the whole family, regardless of body weight, but also an excellent support for a sore back.
What could be simpler than an inflatable ottoman consisting of a textile cover with a zipper and an inflatable chamber inside it? Ottomans differ not only in materials, designs, but also in shapes.
DIY square ottoman, round, triangular, combined from different geometric shapes, can be made from improvised means.

Handy tools in the house

How to make an ottoman yourself if you don't have the skills and desire to cut, cut, twist? Craftsmen offer a lot of ideas and suggestions brought to life. The work of making a nice ottoman is not difficult, but quite exciting, and a hand-made thing radiates special warmth and has an aura of home comfort.

Soft ottomans

The simplest scheme for making a soft ottoman with your own hands is as follows:

Two circles with a diameter equal to the diameter of the upper and lower parts of the product are cut out of the fabric.

Tip: When cutting out parts, do not forget to leave allowances on the seams.

Two rectangular pieces of the same size are cut:

width by height of the pouf;
length equal to half the circumference of the top and bottom of the pouf.

Rectangular parts are sewn together on one side across the width to obtain a long tape.
One of the circles is swept to it and cut off at the seam.
The same is done with the second circle.

Tip: If the seam is not too straight or neat, it is sheathed with a decorative border.

The resulting pouf cover is stuffed with any suitable material.
The zipper is sewn into the unstitched edges that remain in the rectangular tape.

The photo shows a diagram of making a pouf in the simplest way.

Similarly, you can make a cube-shaped ottoman. The difference is in the manufacture of parts that must be square, and for the manufacture of the sides, four parts will need to be made of fabric, not two.

Then:

Details are clasped together.
To more clearly define the edges of the cube, you can use a canvas with a different contrasting color.
Additional strength, elasticity will be given by a denser fabric.
The stuffing of such a pouf can be done with padding polyester and foam rubber. These materials hold their shape perfectly and do not deform.
The hole for stuffing the material is made at the bottom of the pouf so that it is not visible.
If desired, it can be stitched tightly after stuffing the pouf, or a zipper can be sewn in, so that the material can be replaced if necessary.

Sewing a ottoman

The video in this article demonstrates the order of sewing an 8-piece ottoman. To do this, a sheet of paper is folded in four, a template is drawn and cut out on it according to the diagram below.

The unfolded template is fixed on the fabric and cutting of 8 pieces of blanks begins.

Attention: It is not necessary to purchase new fabric for a pattern; you can use old deposits of knitted clothes, old sweaters.

The photo below shows that the sharp end of each hexagon is bent inward by about 5-6 cm and sewn on a typewriter, which allows you to get an octagonal hole for stuffing the finished product after assembling all the elements.

The workpieces are stitched in pairs to each other with an indent from the edge by about 1 cm. The pairs are folded with the front side so that the seams are on the wrong side, in a sewn form there are 4 segments from 2 workpieces.
In a similar way, they are sewn in 2 sections and you get 2 halves of the future ottoman.
The halves are connected to each other on a typewriter, the cover is turned onto the front side.
The ottoman is filled with prepared filler (holofiber, foam rubber, padding polyester), and the hole is closed with a lid of the appropriate size. The edges of the lid should already be finished and it is hand sewn neatly onto the top of the stuffing hole.
The instruction for beginners recommends stitching the ottoman with literally three seams. For this, 2 circles are cut out, the diameter of which is about 50 cm, or 2 squares, if you like clear lines more. Geometric shapes will serve as the top or bottom of the future product.
From the same material or from another, a strip is cut out with a size corresponding to the circumference or perimeter of the square, the width of the strip depends on the height of the ottoman. The height of the ottoman, in turn, is selected depending on the function that will be performed by the product, whether it is a footrest, a seat in the hallway, a toy for young children or a structure in the living room.

Attention: Cutting strips for the sidewall of the ottoman is made taking into account the seam allowances.

The work is carried out in such a way that the seams are on the wrong side, the strip is sewn first of all to the bottom of the product and only then to the top.
After covering all the seams, the ottoman unfolds on the front side and stuffed.
According to the same patterns that are presented above, for the first option and for the second, covers for the ottoman with a zipper are cut out. This will allow in the future to wash the cover or clean it without unnecessary problems and time-consuming, and not to solve the problem of how to sheathe an ottoman with a cloth, if it is already made of cloth.

Reliable base of plastic bottles

There are unlimited quantities of plastic bottles in every home. Take at least bottles of beer and water with a capacity of 1.5 - 2 liters, their color in the finished product does not matter, and they will help to unload the debris in the yard and at home.

To make a good, stable ottoman, you will need at least 16 bottles with a capacity of 1.5 liters or 9 pieces of 2 liters.
Cardboard packaging from household appliances also awaits its turn and is not thrown away for years, and what if the refrigerator breaks down, how to take it for repairs? The video in this article will show how cardboard is used in the manufacture of an ottoman from plastic bottles.

You need to stock up on tape, foam rubber and upholstery.

Hot glue gun, zip for case.

Attention: You can make an even larger circle, square or rectangle out of round bottles, that is, the shape of the product is chosen according to your preferences.

For convenience in work, if a very large ottoman is planned, the bottles are connected into separate sectors and sections with tape, and then the formation of a general structure begins.

If the future product is planned to be round, then the ottoman must be made starting from the middle.
For this, a bottle is taken and, with movements along a radius, new elements are attached to it, which are carefully fixed with tape to each other.
After completing the circle, a base is cut out of thick cardboard. It should be slightly larger than the bottle design.

Fastening of cardboard is also done with adhesive tape in several layers. Once again, dwell on the fact that the grounds must be prepared 2, there is no need, and so everything is clear.
It's the turn of the soft upholstery, for which two parts for the top and bottom are cut out of a dense foam rubber sheet, which are glued in place.
From the rest of the foam rubber, a rectangle is cut out according to the size of the circumference line of the side part, which is wrapped around the pouf.
There remains the final stage of sewing a cover made of upholstery fabric, preferably with a zipper. This operation will not only allow you to easily remove the cover for washing, but also make several options and from time to time update the appearance of your product.

An ottoman from a grandmother's rarity

How to make an ottoman out of a stool so that your grandmother's rarity will serve for more than one year?

Indeed, a stool made of solid wood, well-knit at one time, painted with oil paint, can please the owners for many years, but the appearance does not correspond to the modern environment. Alteration of an old stool into a stylish ottoman will help to balance the interior.

The design of the stool is pre-strengthened with self-tapping screws.
The legs are slightly shortened - do not forget to check the level so that the ottoman does not wobble afterwards.
The frame of the future ottoman is being assembled, for which 4 sheets of plywood are used. They are attached with self-tapping screws to the legs of the stool.
The fifth sheet of plywood is screwed on from the bottom and serves as the bottom of the future craft.
The foam rubber for the seat is cut out with an allowance of 5 cm.

Attention: The upper part of the ottoman is coated with glue, then the foam rubber will not get lost over time into an untidy ball.

The upholstery fabric on the seat is attached together with the foam rubber using staple staples.
The foam rubber can be attached from the sides with slats, which help to give the ottoman a round shape and make it more beautiful.
The rest of the structure is made out with the fabric, fixed with staples.
The wheels are screwed on or, as in the photo above, the pretty legs of the updated stool peep out from under the flirty upholstery.
The task of how to make an ottoman out of a stool was solved in a short time.

For those who like to knock

The rich Russian language raises many associations and questions. How to knock, where to knock, when to knock? For those who like to knock on a nail with a hammer, it is proposed to make an ottoman with your own hands from boards and chipboard.

Pre-prepared rectangular pieces 40x30 cm from chipboard in the amount of 4 pieces.
A circle with a diameter of 30 cm and 4 pieces of wood.
Wood glue.
Furniture casters with special fasteners.
Metal corners, self-tapping screws.
Foam rubber and upholstery fabric.

As you can see, the set of necessary materials does not differ much from each other when we make an ottoman with our own hands, even in different ways:

A box is assembled from rectangles. Metal corners, self-tapping screws are used, all corners of the structure are leveled, they must be straight.
On the lower part, the bars are fixed with glue, on which the wheels will be located in the future.
The base is attached to the top in an individually selected shape.
The finished frame is upholstered according to the same type of technology using foam rubber, fabric and a zipper on the cover.

For knitting and filling lovers

How to make a frameless ottoman with your own hands and therefore soft. Crochet needlewomen will be able to knit a soft ottoman much faster, but their appearance may not please everyone.

Lovers of working with knitting needles present interesting models of ottomans, connected specifically to them:

For work, you will need the thickest knitting needles available in stores.
A fairly thick wool is suitable for needles with a diameter of 9 mm.
The ordinary threads available in the shops are too thin. The price for them is not high, but due to the fact that you will have to make thicker ones from them, weaving them together, you will have to purchase a large enough amount, which will add to the cost of the product.
You can, of course, cut, dissolve, twist unnecessary jerseys, which takes a lot of time, and it is quite problematic to find at home the right amount of plain jersey clothes that have become unusable.
It seems that the solution to the problem of how to make an ottoman with your own hands has reached a dead end, but the clothes lines made of cotton caught my eye.

Attention: Linen synthetic ropes are not suitable for this job, and cotton ropes are problematic to buy in small towns.

For a soft ottoman of sufficient size, you will need 20-30 of these ropes, which are tied into a long rectangle.
The side is fastened with a rope to obtain a spacious, wide skirt.
The bottom is pulled together with a rope of the same color and a bag is obtained, which must be stuffed with something. There are 2 options here - to use the junk, neatly folded on the shelves in the closet, or go to the store and purchase foam rubber or holofiber.

From unnecessary old stuff, the ottoman turns out to be heavy and not as round and fluffy as from store materials, but it frees up space in the closet for new clothes.
The top of the ottoman is made out with the same rope and you can try your product.

Old bucket ottoman

Here's another interesting solution we'll need: an old plastic bucket, thick jute rope, hot glue gun, stapler, scissors, cabinet handle, Velcro tape, upholstery cloth, and some new microfiber rags. You will also need cardboard, but it will be better if you replace it with thin plywood.

The first step is to wash the bucket and remove the metal handle.

Next, use hot glue to glue the outside of the bucket with a string, starting from the bottom.

Cut the end of the rope and hide it carefully.

Place the bucket upside down on a piece of cardboard and circle it. Lay out the upholstery fabric according to the outlined template and cut off a round blank with a release of 5 centimeters.

We make a hole in the center of the cardboard and fabric. We pass the bolt from the furniture handle through them and screw the knob.

Next, we roll the fiber into tubes and radially wrap the bolt between the cardboard and paper, creating a kind of roll. To prevent the fiber from unwinding, we fix it securely with glue.

Then the fabric is stretched and secured from the back with a stapler.

Cover the back of the seat with another piece of fabric to cover up any traces of cardboard.

Cut the Velcro into four equal pieces and glue them crosswise to the bottom of the bucket and the base of the saddle - with the bristles to the bucket and the fluffy part to the seat. Connect the two pieces. Hooray! The ottoman is ready!

The result is such a useful piece of work that you can sit on with comfort.

Various options provide an opportunity to solve the problem of how to make an ottoman yourself from scrap materials that are abundant in any home. The only thing else I wanted to focus on was the floor in the room.

Laminate is quite sensitive to mechanical stress, so it is better to make an ottoman without wheels and legs, that is, with a solid bottom. On a soft surface, carpet, carpet ottomans on rollers are appropriate, but there are no restrictions for tiled covering, unless forged legs can be an exception.

Chipboard ottoman

In one toast, the hero of the "Caucasian Captive" expressed the very essence of being, so that "our desires coincide with our capabilities." If you have free time and a desire to make an ottoman with your own hands from chipboard, you need to prepare opportunities.

Tools and necessary materials are stocked in advance.

A good ottoman cannot be made without a solid base from a chipboard sheet. The optimal size of the structure is within 400x400x500 mm.
It is possible to make a wooden ottoman using a simplified technology, making a frame in the form of a mailbox from a bar and screwing it on with side cuts, but since the ottoman is made for yourself, you can try.

Work with pleasure

In a bad mood, you should not take on work: something will fall on your foot or you will not hit a nail with a hammer.

It is marked out, cut out from a chipboard sheet of 5 squares 400x400 mm for the manufacture of the walls of the structure and the bottom.

Attention: The bottom of the ottoman should not be made of plywood, small children like to hide in secluded corners, they can break through thin plywood and get injured.

The lid is made in any geometric shape: square, round, oval. Beginners can skip experimenting and settle for a square lid. It will have dimensions slightly larger than the main box 430x430 mm in order to protect it from falling inside.
The height of the finished product is made up of the constituent elements - the height of the structure is 400 mm, plus the rollers are 50 mm, the bottom and the tire are 32 mm thick, the upholstery is 50 mm, for a total of 532 mm.
From the prepared elements, the formation of the structure begins.
The sidewalls of the ottoman are held together by metal corners. The beams, which glue all the inner corners, will help to strengthen the rigidity and reliability.
From the front side of the ottoman, the cut itself is screwed into the beams, the caps of which must be sunk into the wood, so that later there will be no problems with the torn upholstery.
The lower part of the box around the perimeter is coated with wood glue, capturing the ends of the beams.
The bottom of the ottoman is attached, and the cuts are screwed into the ends of the beams again. The assembled structure should dry well.
The base of the ottoman is made, but there are still no wheels and a cover on which you can sit in the future.
The lid is fixed with 4 bars screwed from the inside. The work is done after you are sure that the lid closes without hindrance and that the stiffening bars on the side do not interfere with the closure of the lid.
The finished structure turns over, and the wheels are attached with cuts.

Attention: They are fixed through the bottom to the ends of the beams, for which small holes are drilled in the bottom.

Before continuing to work, you need to make sure that the resulting structure is stable enough, holds the person sitting on it well and there are no shortcomings that interfere with further work, otherwise there is no point in starting upholstery.

Ottoman gets dressed

An ottoman made of wood with your own hands, made of chipboard or generally soft needs clothes on top. This function is honorably performed by solid, upholstery fabric, neatly attached to the structure crate.

First, the cover of the ottoman is made, for which a soft lining is cut out of foam rubber, padding polyester, batting. The size of the pad should correspond to the parameters of the seat in order to be neatly glued into place without drooping.
From the fabric intended for upholstery, a workpiece is cut out somewhat larger than the cover. This is done so that the edges can be folded under the lid and fixed from the inside with a stapler or furniture studs.
The instruction further prescribes to design the sides of the ottoman.
A piece is cut out of an upholstery fabric 400 mm x 4 = 1600 mm with a margin for connection. Also, in height, the material should have an allowance at the top and bottom.

Attention: The fabric must be trimmed, stretched, tucked inward, the edges must be secured with furniture studs or a stapler.

The seat is decorated, a niche is upholstered, all edges are neatly closed and you can present the finished product for inspection to discerning family members.
A do-it-yourself plywood ottoman is made according to the same scheme if an option of this simple design is chosen.
The work becomes a little more complicated when an opening drawer is provided on the ottoman, then the stopper bars are replaced with door hinges.

Getting acquainted with the design of this simple piece of furniture, one detail catches the eye: despite the difference in the shapes of ottomans and their types, the base is a rigid frame, there is a seat and legs. They are decorated in different ways, but quilted leather or leatherette gives the products an elite, luxurious look and you cannot immediately determine that the price of the product is within reasonable limits.

Although, it should be noted that a neat ottoman, trimmed with a different material, is able to bring comfort and convenience to the room and looks no less elegant than leather.

The ottoman replaces the stool in the living rooms and reception rooms, because aesthetically, it harmonizes better with cabinet and upholstered furniture. He is of oriental origin, from harem effeminacy and laziness. The furniture makers of the sultans and caliphs invented a chaise longue for the odalisques, on the left in Fig. In a more energetic and cramped Europe, the backrest was removed from it and the seat was reduced, having received a banquet on the right. However, European grandees and cocottes certainly wanted at least a small, but one-man boudoir, and by compacting the banquette was transformed into a pouf - a soft seat without a back, in terms of a round, square or other shape, 40-60 cm high and the same in diameter.

Along the way, about the reasons for eastern ingenuity

Such a piece of furniture as a chaise longue could only be invented in the East. According to local concepts, a person is the more solid, the more he is idle, and business-like concern is the vanity of vanities. For example, here's a joke. Two “new” Uzbeks are talking: “You know, Rakhimbai, I have everything. There is wealth, there is a manor, there are servants-nukers, there is a harem. But, Rakhimbai, I would like to become a snake! " - “Wai, wai, wai, Pulat-bek! What are you saying? Such a respectable, worthy person - and wants to become some kind of disgusting reptile! Why do you need this, Pulat-bek? " - “But think about it yourself, Rakhimbai! After all, she walks lying down! "

What where to do?

Making a pouf with your own hands is not difficult; some types, see below, do not require woodwork at all; cutting and sewing are enough. And if carpentry is needed, but simple and in a small volume, quite feasible in a city apartment. It makes sense to take on work all the more since store prices, as they say, are two steps ahead of the actual labor, material consumption and technological complexity of products. The reason is simple: trade classifiers classify puffs, along with their aforementioned cousins, as luxury goods, for which there is no limit to the wrapping up.

Just don't immediately look for the sample you like and grab the tool. There are many types of poufs, but we need to make an ottoman for a specific room. In the course of their evolution, puffs have become highly specialized and almost every type of them is adapted to the conditions in a room for a specific purpose.

Classic frame pouf with legs, pos. 1 in Fig., Is placed in rooms with hard flooring. If the flooring is soft, then you need a soft ottoman, pos. 2. Its bottom will not rub against the carpet, rug or carpet, and the legs, which are not there, will not leave dents on it. Ottoman (by the way, couches are often also called ottmans), pos. 3, can be made for any gender, because if there are legs, they will be covered with a fringe. What, in fact, is the ottoman and differs from the pouf as such, excluding the oriental decor.

Very durable and comfortable Moroccan, or Moorish, pouf, pos. 4. It can also be made on a frame or one-piece, with or without legs. Unfortunately, it is beyond the scope of this publication to describe this highly aesthetic yet complex product. And in the bedroom with luxurious curtains, the last point of the interior design will be a soft ottoman with puffs, or pouf-pouf, pos. 5.

In service and reception rooms, the interior is usually laconic, but people go there in shoes from the street. In addition, hallways, halls and common areas are planned on a leftover basis and do not suffer from an excess of space, there are a lot of little things in everyday life. A square pouf-box on legs with wheels, pos. 6, or pouf-pedestal, pos. 7. The difference between them, in addition to the finishing of the sidewalls, is very significant, see below about the poufs for the hallway.

Note: lovers also make puffs sometimes from the most unexpected materials that do not fit into any classification. One of the most successful examples will be considered below.

Wireframe

The frames of classic poufs are complete and incomplete. Incomplete - just a wooden bottom with legs, on which a soft pouf is hoisted and attached to it; in fact, this is a soft stool with a thick seat on low legs .. Its disadvantage is an awkward landing and a not very overweight guest can rip off the entire top, so classic poufs are made more often on a volumetric frame of a pair of identical horizontal boards / slabs - pouf tsarg - serving as a support the seat and the entire pouf on the floor, connected by spacers made of timber, pipes, etc., or a solid sidewall - a shell made of a sufficiently strong material.

Note: if the soft padding of the pouf, see below, is made of foam rubber from 40 mm, then the gaps between the spacers should not be wider than its double thickness. If the foam is thinner, then a one-piece shell is desirable.

Lovers on the frames of poufs let anything strong enough: container boxes, coils from under an electric wire or rope, buckets, etc., etc. However, it turns out to be cheaper and easier, and with very high performance characteristics, an ottoman made of plastic bottles. It is elementary to make its base: a package (assembly) of bottles of the same height is wrapped with tape, and tsars, which can even be made of cardboard, are attached to it with tape, on the left in Fig.

Then - covering with soft, on the right, sheathing, etc., see below. There is only one trick: if the drawers are made of cardboard, in the finished pouf the bottles should be oriented with their necks downward, so the loads will more evenly fall on the weak material.

Step by step, the frame pouf is done as follows:

The frame is prepared in one way or another, see above and below;
They wrap it along the shell with foam rubber on PVA glue and with the same glue stick the foam rubber on the upper side. Thickness of upholstered casing on the side from 20 mm, on the seat - from 60 mm;
The sheathing is covered with padding polyester or batting, attaching it to the lower side with a furniture stapler;
The inner (holding) cover is sewn from a strong rigid technical fabric (tarpaulin, canvas, matting) with an allowance for processing at the bottom of 40-60 mm;
A holding cover is put on and attached with a roll-over for an allowance to the lower side, also with a stapler;
Check the patterns of the decorative cover patterns in place and, if necessary, adjust them;
A decorative cover is sewn with the same allowance at the bottom, but the allowance, tucked up, is sewn to form a sleeve-curtain, into which the cord is threaded;
Try on a decorative cover, pulling it down with a cord and, if everything is in order, remove it;
Attach the legs to the lower tsar;
Put on an outer cover, tighten it with a cord - the pouf is ready.

This method requires a slightly higher consumption of material and labor, but allows:

Sheathe the pouf according to patterns of dubious accuracy. all flaws will be revealed on the holding case.
Both covers are easy to put on, and the decorative cover can be removed for maintenance or replacement.
Covers are sewn upside down and turned inside out before putting on; in this case, there is no problem of the outer scar of the last suture, because the seam itself is simply not there.
The last seam does not need a zipper.
A pouf in a double cover will keep its shape better.

Note: The pouf pattern in this case consists of only 2 parts - a round insert on the seat and a strip on the textile shell (sidewall).

About kings

The drawers of a classic pouf are made of plywood, solid wood, textolite or other durable plastic. The metal ones should be dish-shaped, facing recesses towards each other, otherwise the sheathing will quickly rub against their edges. Chipboard for making poufs is quite suitable, see below, but not for drawers: this material in slabs with a completely free edge crumbles along the edges.

About foam rubber

As mentioned above, the soft padding of poufs is most often made of foam rubber. Furniture dense is suitable; on the sides 20-30 mm, on the seat 60-150. The foam rubber seat cushion can be glued with PVA from several thinner layers. The quality of the foam rubber when buying is checked for “snap off”: it is tightly squeezed with your fingers and abruptly released. Dents should straighten instantly, literally following the fingers. If the foam rubber spreads slowly, it is not furniture, but insulating and is not suitable for padding.

Sewn

The one-piece round pouf is already cut from at least 7 parts:

The same is added to the round seat insert on the bottom, however, made of cheap technical fabric;
The textile shell is divided along its length into at least 3 equal flaps, otherwise the seam (or two) will be overloaded and will soon begin to diverge;
The bottom insert is cut from 2 halves with a zipper or a finishing seam with a hem outward, because otherwise it cannot be put on the filler in any way, see below;
To the bottom, so that the lower annular seam does not rub quickly, a felt circle is glued with superglue or "Moment".

Nevertheless, the absence of the need for carpentry work with their shavings and sawdust in a city apartment means a lot, so you should figure it out in more detail with soft ottomans. Let's consider first their most important element - soft padding, and then some successful designs.

Padding

Most of all, padded stools are stuffed with foam rubber of density (brands) from 40. The simplest way to make padding is to roll a piece of foam rubber into a roll and wrap it in 3-4 places in height with tape. How much foam rubber is needed? No need to remember or look for how the length of an arithmetic spiral is calculated, shrinkage, tightening and crumpling of the material, pure mathematics will not take into account anyway. Let's make it simpler: the volume of the pouf, calculated by its outer dimensions, is divided by the thickness of the sheet and the height of the pouf, everything should be expressed in the same units. As a result, we get the length of the cut.

A roll standing upright, as you know, can be crumpled from the end or go to a break in the middle. Therefore, it is better to go for a higher consumption of material and cut circles from the foam rubber, adding 5-7% to the diameter relative to that of the pouf. The circles are cut until its height is obtained plus the same 5-7% or 1 circle. They are glued into a PVA filling block; it is highly desirable - with spacers made of thin cardboard, except for the upper circles to a thickness of 100-120 mm, so that the sitting person does not feel the cardboard.

In either case, the cover is put on the filler block. However, old rags are also suitable for filling the pouf; just clean rags. The best are woolen, woven or knitted. From tightly stuffed into a cover; in this case, the final seam can be very short.

Different ottomans

Now let's see how to sew an ottoman. In addition to round ones, patchwork multi-link poufs are also considered classic. Patterns of patterns for them are shown in fig. for 4, 6, and 8 wedges; Multi-link puffs from an odd number of flaps are less durable, because one of the sutures does not receive help in absorbing the loads from the opposite one and diverges over time. The height and diameter of the poufs are 50 cm; you can change them proportionally by changing the grid step.

Templates are given in quarters: a large sheet of paper is folded in four, mark the contour, cut, and, unfolding, get a template, as on the right in Fig. An allowance of 2x3 cm is there - on the drawstring under the cord, if the bottom is rigid. Cutting out the templates along the red lines, we get an angular pouf, at the top in the center. On green - a pouf-pumpkin (joke, pouf-pillow), in the center. In blue - a pouf with a wave-like profile, at the bottom in the same place.

And about how to sew a patchwork pouf - a detailed master class:

Video: sewing a pouf from rags

Note: Multi-link puffs of a relatively small, 4-6, number of wedges look much more advantageous if the outer cover is sewn on the outside with a decorative seam. A decorative stitch is not necessarily a simple zigzag-snake, there are many different types, but that's another topic. And you will have to sew by hand - machines capable of making a decorative seam are very expensive.

The pouf ball is also quite easy to cut. Because it, unlike, say, a chair-ball, is densely filled with filler, it is not necessary to sew it from many polygons over which an uneven load will spread, although it is filled, like a chair-bag, with foam or neoprene granules. A pattern of a pouf ball with a diameter of 60 cm is shown in Fig. on right. 8 extreme bands make up the equatorial belt, 2x4 middle bands make up middle latitudes, and round inserts make up the polar regions. The filler is the same, foam or neoprene. Poured through 1 of the bottom seams with a zipper and stuffed tightly.

To tailor an ottoman-bag, see next. fig., is already more complicated, because lateral edges det. 2 are formed by sinusoidal arcs. Most often, poufs-bags are made from old (or cheap from second-hand) sweaters: the sleeves are turned inside, the resulting openings are sewn up. Then a technical fabric insert is sewn into the bottom and stuffed with filler through the collar. Next, a decorative insert is sewn into the collar (the open seam on the knitted product is almost invisible); perhaps a carrying strap, and that's it, the pouf is ready.

Neither this nor that, but not bad

A very good pouf is made from a tire. It has long been known to users of the Russian Internet, but just in case we give more photos of the main stages of work in stages, see fig. It should only be noted that a good quality product comes out only when using a glue gun; with manual application of glue, the coils of the rope will never fall flat for anything.

A modification of this idea is relatively little known: a children's ottoman made of 2-3 small-sized scooter tires. It turns out to be softer and, for a child's weight, commensurately elastic. The tires are glued together and additionally fastened with a furniture stapler. Such an ottoman for a child allows him to have a full rage, without risking excessively making skoda and getting hacked for the destruction in the room.

Into the hallway

There is a problem in the hallway with poufs: they get dirty from below, scratched with the socks of street shoes, they are worn out by grains of sand brought in with dirt. An expensive, but by no means the best solution - a pouf with a washable upholstery, on the left in fig. The bad thing about it is not only the high cost, but also the fact that the wear-resistant plastics are slippery and uncomfortable to sit on.

The second way is a pouf stool in the center. Not necessarily a split, the main thing is that the legs are high and the seat is far from debris. However, at the same time, some volume disappears, which is never superfluous in the hallway. Warmer, as they say, is a pouf-box (pouf-box) with a lid on the right. But, firstly, it is difficult to make the outer cover of the box removable, and on high legs the useful volume is too small. Secondly, ergonomics. To get / put something, you need to get up and bend over, which is uncomfortable in the hallway, and unpleasant when chilled or wet.

The good thing about the pouf-box is that its body can be made of chipboard and wooden beams, see fig.:

The edges and edges of the chipboard slabs here are sufficiently strengthened, protected and do not crumble. But there is one important circumstance: it is impossible to shorten the top of the box rack so that the lid retaining bosses fit exactly on the corners, it is impossible, the hanging corners of the box will crumble. The clips should be offset away from the uprights.

The best option for a pouf in the hallway is a pouf-pedestal, see fig. on right. The wooden sides, double-coated with acrylic varnish, will withstand any onslaught of dust, and it is not difficult to renew the varnish. Ergonomics are generally great: if you put the pouf-bedside table with the door to the side, it is almost invisible, and you can get / put the contents without getting up, just stretching out your hand.

Puffs-puffs

The knitted pouf looks gorgeous, see fig. on the right, and it's generally easier to knit than a sweater. However, knitting stretches more easily than textiles and collects dust more readily. A pouf with puffs looks even more luxurious, but surprising at first glance, if the puffs are assembled correctly, it turns out to be no less resistant than the usual soft one and can be easily cleaned with a vacuum cleaner. You don't need to know how to knit to gather fabric in puffs, and all the work will take less time and will require less stress.

For example, the video below contains detailed instructions on how to assemble pouf buffets according to the "Scales" scheme.

Video: pouf-buff according to the "Scales" scheme

There are many other schemes for assembling puffs: leaves, braids, squares, etc. Having learned the Scales it is quite possible to understand them, and the ability to assemble puffs will come in handy, for example, when sewing curtains. 15 types of pouf buffets with diagrams are shown in the following video.

Video: 15 types of puffs

A fairly large number of owners of modern houses and apartments prefer minimalism in interior design. Surplus furniture and its huge size are now considered almost a sign of bad taste and old-fashionedness. That is why frameless furniture has entered our life with great success.

An upholstered armchair bag, being an excellent alternative to bulky armchairs and sofas, can decorate any room, organically fit into its interior. This embodiment of convenience, originality and coziness can rightfully be called a breakthrough in modern furniture design. A practical and functional ottoman bag will not only become a bright accent of the room, but will also help to relax, relieve stress after a long day at work.

A beanbag chair is the right option for almost any decor Red beanbag chair in an eclectic living room

One of the main advantages of this amazing piece of furniture is the ability to sew a bag chair with your own hands. And this can be done by almost everyone who owns even the smallest knowledge in the field of cutting and sewing. Today you have the opportunity to be convinced of this by reading in our article on how to make a bag chair with your own hands.

The modern market offers many models of frameless chairs, presented in a wide range of colors, different shapes and sizes. But among such a huge choice, it is not always possible to find exactly what you need for yourself. After all, everyone wants to equip their home in such a way that it is unlike anyone else - due to non-standard furniture, unusual decor elements and other things. In addition, making something with his own hands, the master puts his soul and positive emotions. Such a thing will not only add originality and comfort to your home, but also bring a favorable energy into its atmosphere. Our master class will show you a fairly simple way to sew an ottoman yourself without much effort and difficulty.

Armchair with fabric cover

Before you start making pears, you need to solve a number of questions for yourself:

Having decided for which room we are sewing a pouf, choose the most optimal sizes for it.
Depending on the design style of the room, decide on the texture and color scheme for the upholstery fabric.
Pick up your filler.
Prepare all the tools and supplies necessary for the job.

What should be the size

The dimensions of the future bag chair are selected depending on the availability of free space in the room and on the height of the person, whether it is an adult or a child:

for people up to 150 cm in height, a chair with a diameter of up to 70 cm is suitable;
for a person with a height of 150 to 170 centimeters, a pouf with dimensions of at least 80 cm in diameter will be optimal;
when the height is over 170 cm, the diameter of the chair must be over 90 cm.

The size is not the same

The size is just right!

We have given an example of approximate size correspondences that a bag chair should have, you yourself decide what is best for you. But, most importantly, remember - there is never too large an armchair for coziness and comfort. The more voluminous it is, the more accurately it takes the shape of the human body, thereby providing maximum comfort. Therefore, you should not save on fabrics and fillers, especially when the free area of the room allows it.

Making a frameless chair

If the sewing of the chair is intended for arranging a children's room, its design can be made in different bright and cheerful colors - with prints, polka dots, flowers, etc. A soft ottoman pear can also be decorated with decor in the form of your favorite characters of children's cartoons.

A hand-made chair bag will be an excellent and convenient accessory for a nursery, and thanks to its lightness and safety due to the absence of sharp corners, your child can easily move it around the room himself. Sewing an armchair made of vinyl or eco-leather for a nursery will make it much easier to care for it, since you can wipe the furniture with a sponge or soft brush.

Chair ball made of eco-leather

For a living room or bedroom, the pear armchair design should be chosen in accordance with the interior of the room. So, for example, armchairs are perfect for a country-style interior, the upholstery of which is made of natural fabrics - linen or cotton.

You can use chenille fabric for sewing a bag chair

If the interior of the room is made in the fusion style, you will have many ways to decorate the armchairs with bags - they can be bright accents of the room or, conversely, merge with the general palette of the interior.

Fusion bean bag chair

The cover is sewn in various colors and textures, it can be knitted from yarn, have a long pile or a plain, smooth surface - when you make ottoman bags with your own hands, there is no limit to the flight of imagination.

Whatever style the room is decorated in, the presence of a pouf bag will add sophistication, individuality and modernity to it, and will also emphasize the good taste of the owners of the house.

Filler - Secrets of the Right Choice

Despite the fact that at first glance, the choice of filling for armchairs may seem rather simple, in fact it is a little bit different. In the open spaces of the Russian Internet, you can find various videos in which you will be offered recycled polystyrene foam for filling a pear chair, obtained as a result of processing defective or used foam products. Such expanded polystyrene is categorically not suitable for filling poufs, as it has soft granules of a broken circle, which quickly shrink and grind.

For stuffing furniture, it is better to use primary polystyrene foam - its granules are ideally round and have greater resistance to stress and deformation. The size of the balls of primary polystyrene foam can be of different sizes, but in our case it is better to use a diameter of 2 to 6 mm.

Granules with a diameter of 5-6 mm

Styrofoam granules help the chair to hold its shape, adding stability to it. And in order not only to sew a bag to the chair, but also to provide it with the necessary softness, softening materials should be added to the filler - foam rubber crumbs or holofiber. Foam rubber has a low cost and availability, but, at the same time, it ages rather quickly and turns into dust.

Foam crumbs

As for the artificial down (holofiber) - its quality characteristics are much higher. It is air permeable, does not absorb odors, is hypoallergenic, does not accumulate dust, and is durable.

Furniture, the filler of which consists of a combined composition, including expanded polystyrene and holofiber, will be much softer, more practical and more comfortable.

Sagging chair without artificial fluff

This is what a chair looks like, complemented by artificial down.

Tools and other materials

So, to sew a comfortable and stylish ottoman bag for one adult, about 85 cm in diameter, we need:

Dense fabric (linen, tapestry, velor, eco-leather, artificial fur, etc.) for sewing an external removable cover 150 cm wide and 320 cm long.
Filler - minimum volume 0.5 - 1 cubic meter.
Smooth, sliding, plain synthetic fabric for an inner bag 150x300 cm.
Pattern paper - tracing paper is ideal.
Two zippers, 40 cm and 60 cm.
Sewing machine.
Reinforced threads.

Stages of work

The step-by-step step-by-step instructions presented by us with a photo will show you how to make an ottoman with your own hands at home. The proposed scheme contains all the exact dimensions of the patterns.

Cutting details

Before you start sewing a pear chair, you need to cut out the parts of the pouf (one small lower part for the base and six wedges for the chair itself) - draw them on paper, and then transfer them to the fabric for the inner bag and outer upholstery.

Arrangement of details on fabric

Do not forget to mark the seam allowance - about 1.5 cm. Before you start sewing the patterns, you should process their inner edges.

Bean bag chair pattern

Assembly

Sewing a frameless chair begins with sewing all the wedges of the inner bag one after another, leaving areas for the zipper. At first, the six main parts are folded alternately face to face and cleaved with pins so that the fabric does not slide in different directions, and the sewing is even, after which they are stitched on a sewing machine. The bottom of the bag is sewn last. A zipper is sewn into one of the wedges for easy filling of the filler and its renewal. We sew an outer cover by a similar principle.

Pattern for a large pear chair An example of a large pear chair
Pattern for a ball chair Ball chair example

Tip: sew the inner bag first, and then start sewing the outer one. Thus, you can, having made mistakes that are not so critical for the interior, avoid them when making the outer upholstery, because it must be perfect.

After the covers are ready, you can start filling them. In the inner bag, as if in a bag, two-thirds of the filler is poured, then the zipper is tightly closed and the outer cover is put on top.

Sizes for sewing pattern for adult and child seat