ETEK LLC is an authorized service center for the repair of gas boilers. We are an official dealer of most manufacturers of heating equipment, such as: Baxi, Bosch, Buderus, De Dietrich, Ferroli, Viessmann, Wolf, etc. All personnel of our Service Center are regularly certified by these manufacturers.
We provide round-the-clock urgent repairs of gas boilers, heating systems and utilities in Moscow and the Moscow region, as well as in other regions. We have our own warehouse, where a wide range of spare parts is presented.
Service cost
Price list for the departure of the service team and basic diagnostic work:
The detailed cost of all measures for repair, service, expansion and installation of your heating system can be found in the price section.
The main causes of breakdown
Incorrect piping can cause serious damage to the entire system. Water treatment also has a great influence - if the water used is not filtered, then the heat exchanger and pipes of the heating system can become clogged. But the most dangerous thing is bad wiring, which can provoke automatic failures and even cause the boiler to explode at the slightest gas leak.
Details of our work:
As a rule, minor breakdowns and equipment failures are typical cases that are well known to our specialists. Usually, everything can be corrected by proper calibration of automation or by replacing worn out units. All this is done at the first visit of specialists right on the spot, the teams always have with them a set of in-demand spare parts for repairing gas boilers at home.
Sometimes it is not possible to cope with the problem on its own: for example, Wolf gas boilers of the GU series are turned off with the display of an error about the output of flue gases - i.e. the normal part of the boiler cycle is indicated as an error. Therefore, it is important to read the user manual. The occurrence of malfunctions is signaled by the built-in security system, which displays the number of the corresponding error on the display. Equipment manufacturers recommend contacting the service center if, after restarting the boiler, it stops again. In cases where it is not possible to solve the problem on your own, we recommend that you contact us for help. We will help you repair a gas boiler quickly and efficiently, right at your home.
Our Service Center offers a full range of services for the maintenance and repair of gas boilers directly at the facilities:
- Regular maintenance of gas boilers at home anywhere in Moscow and the Moscow region. During the operation of boiler equipment, a number of malfunctions arise, many of which can only be identified by boiler maintenance specialists.
- Checking the connection and installation diagram of the gas boiler for compliance with the manufacturer's recommendations and technical standards.
- Diagnostics of boiler malfunctions and elimination of their causes.
- Repair and / or replacement of faulty parts.
- Cleaning the boiler, burner, magnesium anode and other working surfaces if necessary.
- Gas boiler control board repair.
- Boiler commissioning after repair, conservation or maintenance.
- Setting up the boiler automation and balancing the gas flow to achieve optimal performance.
- Control measurements of the air composition in the boiler room and in the exhaust gases using a high-precision gas analyzer (expert analysis of the content of CO, CO2, methane, propane-butane).
- Any other work that may be required to ensure trouble-free and efficient operation of your boiler room at a convenient time for you at home.
It is also important to remember:
The main element of a gas boiler is the burner, which ensures the efficiency of fuel combustion. During the operation of the equipment, deposits of combustion products accumulate on the working surfaces, which leads to a decrease in the efficiency of the burner. Ignition reliability and combustion stability are reduced. Fuel consumption increases and carbon monoxide production increases. Cleaning during service of gas boilers and timely replacement of spare parts helps to avoid this. If this is not done, the working surfaces of the boiler fail - cracks and ruptures appear, which, as a result, will lead to a serious accident.
After repairing the gas boiler, it is necessary to adjust the equipment so that the technician does not start work unbalanced and does not receive an emergency load. Further service support, which is the guarantee of the stability of any boiler house, we are ready to undertake in full.
Our service center works around the clock and seven days a week, for your convenience, you can fill out an online application for the repair of gas boilers - on our website or by calling the indicated numbers at any time convenient for you 24/7. Departure of the master on the day of treatment!
Service and repair center ETEK carries out any repairs of boilers and heating systems of various manufacturers. We have become one of the largest Authorized Centers for Buderus, Wolf, Oilon and Viessmann. We repair boilers Ferroli, Baxi, Bosch, De Dietrich, Protherm, Vaillant and other brands.
Repair of boilers in Moscow and other regions
Round-the-clock repair of any boilers in 1 day with a guarantee. We have been repairing heating for over 18 years. We work in Moscow and the Moscow region, as well as in the nearby regions: Vladimir, Kaluga, Ryazan, Smolensk, Tver, Tula and Yaroslavl regions.
Our advantages
We leave for repairs within 2-3 hours. For this, we have our own fleet of company vehicles, fully equipped with everything necessary to eliminate the accident.
Experience of our specialists from 8 years. All of them are regularly certified by heating equipment manufacturers and refresher courses. Each engineer always has a set of the most demanded spare parts and consumables with him. All this allows us to eliminate the breakdown of your equipment in one trip.
A 24-hour warehouse for spare parts and consumables in the center of Moscow. This allows you to quickly deliver the necessary parts to objects if the engineer does not have them with him. The spare parts catalog is constantly updated, and even includes rarely requested items. The convenience of our warehouse has been appreciated by other service departments and they regularly purchase components there.
A complex approach
Elimination of accidents in heating systems implies an integrated approach to diagnostics. Our experts necessarily conduct a detailed audit of all engineering systems, including air analysis and check the chimney for leakage of combustion products.
We pay special attention to water treatment and power supply systems, on which the stability and reliability of the heating system depends. Pumping groups, additional storage boilers and expansion tanks, thermal insulation of the supply and transport circuits - each of these factors affects the efficiency of your boiler room.
Exit and diagnostics prices
Price list for a visit of a service engineer and diagnostic work:
Right now you can call our phone or leave an online application. The engineer on duty will contact you and calculate the price of the repair. The detailed cost of all measures for repair, service, expansion and installation of the heating system can be found in the section
The specialists of the "Complex of Ideas" company provide a wide range of heating equipment services. Wall-mounted boilers are compact and reliable units capable of heating indoor air and water for domestic needs. The main cause of problems with this system is improper operation or installation. That is why we advise you to start cooperation at the initial stages, i.e. even at the stage of buying a boiler. We will advise you on the best option for the heating system and tell you how to use it correctly in order to prevent breakdowns.
Floor standing boiler repair
Floor standing gas boilers are ideal for heating large rooms. But even with proper operation, sometimes difficulties arise. The reasons for the breakdown are internal and external. Not always the owner of a country house can determine why the heater stopped working. Only a professional technician can return the system to its normal working condition.
Repair of a double-circuit boiler
Double-circuit gas boilers are considered the most reliable and convenient option for country cottages. It is they who provide the owners with hot water and heated air in the room. Proper handling of gas equipment and strict adherence to the operating instructions can extend its life. But sometimes you have to resort to the services of repair specialists. Entrust the solution of this important issue to the specialists of the Complex of Ideas company. We have all the specialized knowledge and sufficient experience to carry out the repair of gas units.
Repair of a single-circuit boiler
Single-circuit gas boilers are very popular with owners of private suburban real estate. These units are considered inexpensive, economical and profitable options for maintaining optimal temperature conditions in residential premises. If you suddenly notice the unstable operation of a single-circuit boiler, you need to urgently seek professional help. Our engineers are ready to help and carry out all types of repair work.
We turn to specialists for repairs
The engineering and technical personnel of the Complex of Ideas company consists of highly qualified specialists who have been trained in the training structures of Mosoblgaz, who regularly undergo retraining at seminars of the leading manufacturers of gas equipment: Viessmann, Vaillant, Baxi, etc. that there are corresponding certificates.
The advantages of contacting our company
- Excellent service level.
- Decent quality of gas boiler repair.
- Availability of quality assurance.
- Affordable rates.
You can call a specialist to solve your problem. Fill out the form, briefly describe your problem and we will call you back for consultation.
We repair all gas boilers, including
Prices for Gas boiler repair
- Service Price
- Departure of the engineer during working hours from 8:00 to 22:00
- Within a small concrete ring 2000 RUB
- Tariff when going to the facility outside the small concrete ring, per km. round trip RUB 30
- Departure on holidays× 1.5
- Departure outside of working hours from 22:00 to 8:00 in the morning× 2
- Diagnostics
- Fault diagnosis (up to 2 working hours) 2000 RUB
- Fault diagnosis (more than 2 working hours) RUB 1,500 in hour
- Replacement / installation of gas and fuel fittings and devices
- Cleaning, replacing the electrode with setting gaps 1000-2000 rub.
- Cleaning, replacing the photocell 1000-2000 rub.
- Replacing the control box, combustion manager 1000-2000 rub.
- Fan replacement RUB 1500-3000
- Replacing the burner actuator (without adjustment) 3000-5000 rub.
- Replacing the transformer 3000-4000 rub.
- Replacing the nozzle from 3000 rubles.
- Replacing the fuel filter from 5000 rub.
- Replacing the diesel burner fuel pump from 5000 rub.
- Installing the fuel level sensor
- Bleeding the fuel line
- Replacement / installation of water fittings and devices
- Circulation pump from 3000 rub.
- Pumping group from 3000 rubles.
- Heating system make-up with a pump from 1500 rubles.
- Security groups from 3000 rub.
- Automatic air vent from 2000 rub.
- Mixer servo RUB 3000
- Distributor comb from 5000 rub.
- Installing a coarse filter from 4000 rub.
- Cleaning the coarse filter from 600 rubles.
- Repackaging the engineering system for 1 point from 3500 rub.
- Replacing the wall-mounted boiler pump from 3000 rub.
- Replacing the primary heat exchanger of the wall-hung boiler from 4000 rub.
- Replacing the wall-mounted boiler secondary heat exchanger from 4000 rub.
- General
- Repair, replacement, installation and commissioning of automation
- Replacing the electronic board RUB 3000
- Replacing the control panel from 3000 rub.
- Replacing the thermostat 3000-5000 rub.
- Replacing the thermocouple from 3000-5000 rub.
- Replacing the thermostat 2000 RUB
- Installation, commissioning of weather-independent automation from 7500 rub.
- Installation, commissioning of weather-dependent automation up to 3 heating circuits from 7500 rub.
- Installation, commissioning of weather-dependent automation up to 5 heating circuits from 8500 rub.
- Assembling the controller from 6000 rub.
- Setting weather-independent automation from 5000 rub.
- Setting weather-dependent automation from 5000 rub.
- Connecting an additional boiler automation module from 3500 rub.
- Installation of outside temperature sensor, room regulator (not including cable installation) 2000 RUB
- Installing the line temperature sensor RUB 1000
- Installing the flue gas temperature sensor RUB 1000
- Installing the overturning draft sensor from 1000 rubles.
- Installing the boiler body temperature sensor from 1000 rubles.
- Installing the boiler sensor from 2500 rub.
- Installing and configuring the servo from 2500 rub.
- Installation and connection of the relay contactor from 2500 rub.
- Installation of an additional automation module from 3500 rub.
- Replacing an additional automation module similar to the one installed from 2000 rub.
- Replacing an additional automation module that is not the same as the one installed from 2500 rub.
|
A specialized heating service center of an engineering company has technical departments throughout the Moscow region. We have been carrying out qualified repair and maintenance of a gas boiler, boiler equipment at facilities in Moscow and the Moscow region for more than 20 years! Maintenance and repair of gas heating boilers in private houses is always carried out professionally, with high quality with a guarantee for work and replaced spare parts. The emergency service on duty works around the clock and every day to eliminate accidents of boiler equipment at serviced facilities in the Moscow region. Polite specialists are always ready for technical support of gas boiler houses in emergency situations when heating in a cottage and a gas boiler house of an enterprise is stopped during the heating season. Urgent repairs of heating boilers are carried out at uniform prices, which also refer to a one-time visit of a service foreman to the house for repairing gas equipment in the boiler room of a residential building. |
We carry out the repair of gas equipment professionally, quickly and efficiently. Service engineers have vast experience, they constantly undergo training and refresher courses in special plants. The availability of professional diagnostic and repair equipment for servicing gas boilers of any capacity allows us to perform repairs at the highest level. This is our daily work, which must be 100% implemented.
Within a few minutes after submitting an application to the engineer on duty, a free service engineer working in the subdivision of the service center of your area will contact you to clarify the nuances of arriving at the house and repairing the gas boiler.
The cost of the departure of a removal specialist (payment for mileage) is estimated at 15 rubles / km from the Moscow Ring Road in December 2014 (the price per mileage is constantly being adjusted, please check the cost of work with the engineer on duty). When replacing a boiler, finances paid for a set of measures for diagnosing heating equipment in a residential building are then included in the total payment for work, equipment, spare parts when replacing a gas apparatus at home. To replace the gas boiler AOGV, a full range of organizational and technical measures is carried out, and if necessary, all documents are drawn up according to the list of the local branch of Mosoblgaz (gas trust).
All questions of interest to you about the repair of a gas boiler, the cost of repair work, please specify at the time of the current time by calling the engineering service on duty
A service engineer accepts information to identify a malfunction of a gas heater and organize urgent repairs of equipment in a private house or a gas boiler house of a commercial enterprise.
Data for your application for the repair of a gas boiler in a cottage:
- manufacturer and model of gas boiler (abbreviation in letters and numbers);
- gas apparatus power;
- if there is a blower burner, indicate its model;
- about a malfunction (if there is a self-diagnosis, indicate the error code);
- photographs and video materials upon the request of a service engineer;
- serial number of the gas boiler (desirable);
- postal address (location of the object is required);
- free telephone line number for contacting the user.
In an emergency, pay close attention to the recommendations of the technical service engineer on duty. Urgent emergency repairs of gas boilers are carried out according to the accelerated organization of service. The polite specialists of our company work to provide technical support in winter and summer around the clock, paying attention to each customer.
We wish everyone peace and warmth in your homes!
- The right start is the guarantee of the efficiency of boiler repair in a private house.
- What malfunctions are addressed by the owners of heaters in the Moscow region.
- Calling a service center master for urgent repair of a gas boiler.
- Emergency repair of the wall-mounted gas apparatus Buderus.
Maintenance of a gas boiler in a residential building under an annual contract
gas floor (wall) boilers after gasification of the facility, when the contract is concluded for the commissioning of your gas facilities, is carried out with commissioning according to the plan of the contractual terms of both parties. After the conclusion of the contract for the commissioning and maintenance of the gas boiler, the validity period is one year, during which the owner of the gas boiler counts on maintenance, if a master is needed to adjust the heating.
When organizing installation work for heating equipment in your residential building, a comprehensive contract is drawn up for the installation and commissioning of heating devices, at the same time, commissioning and maintenance of the gas boiler are performed subject to the service guarantee for the entrusted equipment. Preventive work for gas boilers and heating systems is best carried out by prior request, coordinating all types of maintenance in the summer, which is always convenient and cheap for the customer.
Service center for the repair of gas boilers
Our company has been performing the first start-up of the gas apparatus, installation and maintenance work for any heating equipment on a professional basis for more than 20 years!
Specialized technical divisions of the center work with many foreign manufacturers of gas heating equipment, such as Protherm and Thermona, Vaillant and De Dietrich, AEG and ACV, BAXI, Beretta and Bosch, as well as the German Buderus plant, which is setting up the production of diesel and gas boilers in Russia.
The excellent quality of maintenance and post-warranty service of gas boilers CTC and Dakon, Demrad (discontinued) and Duval, Electrolux and Ferroli, Junkers, Lamborghini and Mora make our company one of the leaders in this industry. The team of specialists is proud and loves their work. We constantly take into account the requests and wishes of the owners of South Korean double-circuit heaters Kiturami and Rinnai, Arderia and Navien, as well as high-quality German heating equipment Wolf and Viessmann (we note the excellent supply of spare parts and components).
Russian gas boilers Don, Siberia, KChM, Ishma, AOGV, AKGV (ZhMZ), Neva Lux and Thermotekhnik (special offer) have technical support since the entry into the market of climatic equipment for everyday life. Today, Russian gas boilers have once again proved their advantages in reliability and the best performance for uninterrupted operation in the harsh winter, when heating must be comfortable and without stopping for repairs.
Service repair applies to the heat exchangers of floor and wall gas boilers of the specified manufacturers, due to the fault of the production. If the warranty card is correctly drawn up and commissioned by the company's service engineer, then a free replacement of the spare part is guaranteed. Be sure to order the first start-up of a gas boiler in a private house from an authorized service company, a representative of the manufacturer of the brand of your device.
Repair of imported heat exchangers can be accompanied by the ordering of the required equipment and its long-term delivery from abroad. Winged - “abroad will help us” may not be entirely relevant for many reasons on the way of spare parts to Russia, in particular to Moscow and the region. In this simple competition, the domestic heating equipment (Zhukovsky, Borinsky, Rostov Heating Boiler Plant) has been constantly winning over the past 20 years, which introduce both Russian and European control and safety automation (Honeywell, SIT 820 NOVA, etc.) the supply of which is difficult to disrupt and stop. These are not cast-iron heat exchangers of floor-standing boilers, gas valves and automation units - these are highly intelligent parts of heating boilers dozens, hundreds of times smaller than metal heat exchangers of heating units.
If the heat exchanger has not been exposed to freezing with a water coolant, then chemical flushing of the internal body of the heat exchanger will bring it into working condition and leave the ideal formula for flow and heat exchange. Heat exchangers for the repair of gas boilers of domestic production, such as Neva Lux, ISHMA, AOGV, AKGV, DON, SIBERIA, KChM, ZOTA are always available, the repair of such gas boilers is carried out promptly and efficiently.
In order to avoid unpleasant situations associated with the repair of a gas boiler heat exchanger, we recommend that you do annual chemical flushing of steel heat exchangers and the entire heating system in a private house, which leads not only to the safety of the heat exchange unit, but also to an increase in heat transfer in the heating system and, as a consequence, saving finances and resources boiler. With high-quality maintenance and proper organization (boiler piping) of heating, gas appliances provide the desired heat exchange and are operated for decades without overhaul.
Repair of boiler control boards
for wall and floor gas (diesel) heating boilers, both double-circuit and single-circuit devices, is carried out after diagnostics of heating equipment at home. A detailed analysis of the operating conditions of the boiler and the examination of external signs of a board malfunction is sufficient for a clear identification of malfunctions and further troubleshooting. We service electronic control and units of gas boilers of imported and Russian production.
The owners of European wall-mounted double-circuit heaters are increasingly proposing to repair and restore the control board, rather than install a new electronic unit on their boiler. Why is this initiative taking place?
- Repairing an old board of any boiler unit is always cheap relative to replacing a faulty one with a new control board.
- In the course of diagnostics, obvious causes and sources of failure of the control unit of the heater are identified.
- Correcting faults in the boiler boards brings a clear understanding of a qualified repair during the working condition of the heating boiler and maintaining the warranty for the work performed, as well as replaced spare parts.
The presence of an electric current voltage stabilizer (safety devices) for a gas hinged boiler (other types of boilers) - there is a special condition for the operation of devices with a correct electrical connection. The electrical characteristics recommended by the manufacturer of hot water equipment during commissioning (first start-up) of the apparatus, of course, must be constant and controlled.
The absence of a stabilizing device makes it more likely that a voltage drop in the power supply network will render the electronics unusable. The presence of a stabilizer does not always mean a stable voltage at the input to the automatic control of a gas boiler, since the technique of this kind of stabilization is different in its technical parameters and quality purpose.
During the diagnosis of the boiler, it is worth checking the stabilizer under load, identifying its limits (lower and upper) of performance for the gas control board. But in any case, diagnostics and repair of the gas boiler control board is inexpensive, if you compare such a repair of the unit with the replacement with a new electronic board, the money saving is very significant here!
Many workshops for the repair of gas boilers of well-known manufacturers, such as Wisman, Buderus, Vailant, Proterm, Baksi, Ferroli and Thermona (Term) offer replacement of electronic control boards, automation. In this case, the maintainability of electronic boards is an issue under discussion in the direction of the official replacement of the board. New spare parts are always available in the warehouse from the firms of official dealers for the maintenance of this heating equipment.
And what should users do if the model is discontinued, for example, some models of wall-mounted boilers SAUNIER DUVAL, HERMAN, JUNKERS, UNITHERM. The supply of parts, including boards to the Russian market for these boilers has ceased, but they are in excellent condition and the owners do not want to part with them? So what if you need a boiler electronics, heat exchanger or 3-way valve?
We repair any electronic control boards for gas boilers, restore heat exchangers and duct parts by chemical washing. With these questions, please contact our service center, we will certainly help you in solving these problems, the repair of gas boilers of this kind is difficult, but quite feasible.
Repair of Russian gas boilers
The main direction of our company's practice is the repair and maintenance of gas boilers of domestic production, that is, gas heating and water heating equipment of Russian manufacturers and factories of the EurAsEC countries. These include factories with extensive experience in the production of gas heating devices, as well as original spare parts for the assembly and repair of these heating devices.
ISHMA of the Lipetsk Borinsky manufacturer is well supplied with parts and spare parts for the repair of this gas equipment. For example, a heat exchanger for replacement in a gas boiler ISHMA-40 is produced at the plant within two working days, the heat exchanger is made to order.
Zhukovsky machine-building plant ZhMZ produces high-quality gas boilers today with Italian and German automatic control systems, which has an excellent effect on the operation of the units and are presented at a real price in Moscow and throughout Russia. Zhukovsky gas boilers AOGV-11.6-3; AKGV-11.6-3; AOGV-17.4-3; AKGV-17.4-3; AOGV-29-3; AKGV-29-3; KOV-SG-43; KOV-SG-50; KOV-G-68, which for many decades have been in great demand among the population of the Russian Federation, both among the owners of private houses and for gas boiler houses of small enterprises.
The Siberian manufacturer of equipment Zota is among the best offers of boilers operating on gaseous and other fuels in country houses. Rostov gas boilers Don have always been maintainable and easy to operate, spare parts for these boilers have not been changed for several decades. The old model of universal combined boilers Don of the Konord plant in Rostov-on-Don was discontinued, but it was replaced by a new modification of the heater with a cast-iron heat exchanger.
In recent years, wall-mounted gas boilers Neva Lux of the St. Petersburg supplier of modern heating equipment have been in great demand among owners of apartments, private houses, boiler enterprises. Repair of gas wall-hung boilers Neva Lux is always carried out at a high professional level, taking into account the excellent service provision with spare parts, components for the repair of Russian boilers Neva Lux. Carefully follow the information on the Neva Lux boilers, you will learn about all changes and supplies of equipment in your region in the office of the company in real time.
In 2018, the list of serviced domestic gas-fired heating equipment is as follows:
EuroTherm (Kursk)
NevaLux (St. Petersburg)
Ishma AOGV (Borinskoe)
AOGV (AKGV) ZhMZ (Zhukovsky)
Siberia plant Rostovgazoapparat
Don Conord (Rostov-on-Don)
Thermotechnician (Moscow)
Taiga (Moscow)
Hearth (Ulyanovsk)
ZOTA (Krasnoyarsk)
KCHM (Kirovsk)
Pechkin KSG (Taganrog)
and other gas boilers from Russian manufacturing plants.
Russian gas boilers - repair and maintenance in the Moscow region and Moscow:
- Repair and maintenance of wall-mounted boilers Neva Lux is the specialization of our service center in the Moscow region and Moscow. We offer installation, commissioning of a wall-mounted gas-fired device, its connection to a gas supply system, a coaxial chimney, as well as pipes of the heating system and hot water supply in a private house.
Gas settings for safety automation, adjustment of heating circuits in a country house are performed by masters after a call from the company's dispatch service. Repair of electronic control boards for gas boilers Neva Lux, testing of the electrical and electronic circuit of wall-mounted heating units Neva Lux in the Moscow region can be ordered by any resident, even from remote areas of the Moscow region. Repair and annual maintenance, as well as one-time visits of specialists from a single service center for repair and commissioning work for heating equipment in New Moscow and the Moscow region.
- Repair and maintenance of gas boilers ISHMA. Diagnostics, repair and service of Ishma heat exchangers, not excluding the order of a new part and its replacement. Ishma gas boiler leaking? Is the pressure in the heating system with Borinsky heater falling? Ishma unit shuts down on its own, knocks and clicks inside when heated? Contact our Moscow service for the repair of household gas boilers, our masters are always ready to provide technical support to every resident of the near and distant Moscow region.
Repair and replacement of Ishma gas boilers are carried out at a high professional level to the working condition of the equipment in the cottage. Spare parts and components for Ishma devices are always in stock and provided as part of maintenance with a guarantee. We eliminate complex malfunctions of non-volatile boilers Ishma, when the heater does not start for a long time or goes out for no apparent reason.
Foreign gas boilers - maintenance and repair in Moscow and the Moscow region:
* The presented brands of heaters are serviced subject to the actual availability of spare parts in the Russian Federation!
- Repair of German gas boilers VAILLANT Vailant
- Repair and maintenance of a gas boiler from Slovakia PROTHERM Proterm
- Repair and adjustment of Slovak boilers ALPHATHERM Alfatherm
- Repair of gas boilers using German technology BUDERUS Buderus
- Repair of gas boilers ARISTON Ariston
- Repair of gas boilers BERETTA Beretta
- Repair of gas boilers AEG AEG
- Repair of gas boilers JUNKERS Junkers
- Repair of gas boilers MORA Mora
- Repair of gas boilers ARDERIA Arderia
- Repair of gas boilers HERMAN Herman Spare parts for the boiler are available in stock!
- Repair of gas boilers KITURAMI Kiturami
- Repair of the gas boiler ROCA Roca out of production!
- Repair of gas boilers DEMRAD Demrad out of production!
- Repair of gas boilers LAMBORGHINI Lamborghini
- Repair of gas boilers CHAFFOTEAUX Shafoto Shafote
- Repair of gas boilers WOLF Wolf
- Repair of gas boilers from France FRISQUET Friske
- Repair of the gas model HERMANN HABITAT Herman Habitat 2 is out of production!
- Repair of gas boiler VIADRUS Viadrus
- Repair of the Polish gas boiler TERMET Termet
- Repair of the French boiler SAUNIER DUVAL Senor Duval Spare parts available and on order!
- Repair of gas boilers IMMERGAS Imergaz
- Repair of gas boilers technology Germany-Japan KENTATSU FURST
- Repair of gas floor boilers RAPIDO
- Repair of gas floor boilers SIME (Syme) Italy
- Repair of gas boilers ATTACK
*** For spare parts for boilers discontinued in Europe, please call
emergency dispatch service of an engineering company at the current time! Many original spare parts on order with a realistic delivery possibility.
Gas boiler repair Neva Lux
We repair the gas boiler Neva Lux at the request of the user of this gas appliance. A request to call a Neva Lux gas equipment repair specialist is carried out through the company's office or by calling the technical duty shift outside of working hours. As representatives of the Gazbalt company, which produces gas wall-mounted boilers and gas water heaters Neva Lux, we carry out a clear and well-functioning mechanism of actions for the repair of gas equipment Neva Lux.
We respond to every customer request on the day of contact, we repair the gas boiler, minimize the cost of additional spare parts, parts, equipment. Today our company offers repair services for gas wall-mounted boilers Neva Lux of the following models: Nevalux-8230, Nevalux-8230-1, Nevalux-8624, Nevalux-7211, Nevalux-7218, Nevalux-7224, Nevalux-8618, Nevalux-8224, Nevalux -8224-1. The list of works on the repair of the gas boiler Neva Lux includes the following technical measures:
- repair of the fan operation control system - replacement of the air pressure switch of Neva Lux gas boilers;
- replacement (repair) of the fan of the Neva Lux boiler to ensure the forced removal of exhaust gases;
- replacement of the heating temperature sensor, correction of faults in the heating circuit of the wall-mounted boiler Neva Lux;
- replacement of the flow sensor of the DHW circuit of the Neva Lux boilers;
- replacement of the water overheating sensor for double-circuit boilers Neva Lux;
- checking and replacing the temperature sensor of the DHW circuit to maintain the set temperature and correct operation of the Neva Lux household boiler for preparing hot water;
- repair of the ignition system in the Neva Lux boiler, replacement of the electrode, transformer and other spare parts;
- repair of the flame control system on the burner; replacement of the ionization plug for all models of Neva Lux boilers;
- diagnostics, setting the operation of the gas modulator valve, setting the factory settings for the gas supply to the burner block of the Neva Lux boiler;
- flushing, replacement, repair of the heat exchanger of the Neva Lux hinged boiler on the recommendation of a service engineer;
- repair (replacement) of the circulation pump of the Neva Lux heating boiler;
- replacement (repair) of consumable parts of the Neva Lux boiler: safety relief valve, valve for automatic venting of air from the heating system,
- preventive maintenance, check and repair of the burner device of the Neva Lux boilers.
Repair of gas boilers ISHMA
Repair of gas floor boilers ISHMA is always carried out at a high professional level. It is not enough to know these Russian-made boilers, these gas boilers need to be understood and felt what they lack, what is the cause of the malfunction. Our customers of the repair service are constantly convinced of this, when dealing with the specialists of our company.
Today we repair all models of the ISHMA gas boiler, taking into account new heating equipment and old models of gas appliances. Urgent, emergency, routine repairs for floor and wall models of Ishma boilers are carried out according to the following names indicated in the list below.
Ishma wall-mounted boilers of low power:
- Wall-mounted combined water-heating boiler ISHMA 12.5 BSK IS-143.00.00-1. Installation and commissioning, repair and annual maintenance, a maintenance agreement and the entire package of documents from a specialized organization for a gas trust in the cities of Podolsk, Serpukhov, Stupino, Kashira, Domodedovo, Vidnoye and Klimovsk.
- Combined gas wall boiler ISHMA 12.5 BS IS 142.00.00. Repair and maintenance, adjustment of gas, heating system and chimney in the area of the city of Mytishchi, Khimki, Pushkino, Klin and Solnechnogorsk.
Floor-standing boilers Ishma with a capacity of 25, 31.5, 40, 50 kW:
- ISHMA 25 NOVA SIT IS -150.00.00 RE, foreign automation. Maintenance and chemical flushing of the heat exchanger gas. Ishma boiler in the area of the city of Shchelkovo, Elektrostal, Yubileiny.
- ISHMA 25 U IS 9901,00,00-U RE, automation made by the plant in Ulyanovsk. Diagnostics and repair of the Ishma heater, cleaning of a steel heat exchanger in the city of Mytishchi, the settlements of Boltino, Belyaninovo, Zhestovo.
- ISHMA 31.5 U IS 9901.00.00-U RE, automatic equipment produced by the Ulyanovsk plant. Installation and commissioning works for boilers Ishma in the area of the cities of Pushkino, Ivanteevka, Fryazino.
- ISHMA 31.5 NOVA SIT IS -150.00.00 RE, imported automatic boiler control. Contract for annual maintenance of the Ishma gas boiler house in Khimki, Dolgoprudny, Lobnya.
- ISHMA 40 NOVA SIT IS -150.00.00 RE, imported automation unit. Maintenance and repair of the Ishma heating boiler in the area of the cities of Klin, Zelenograd, Solnechnogorsk.
- ISHMA 40 U IS 9901,00,00-U RE, Ulyanovsk automation unit (Russian production). Elimination of a leak in the heat exchanger of the Ishma boiler in the city of Istra, repair or replacement of the Ishma boiler, the Arbat gas automatics in the Istra district, as well as in the cities of Dedovsk, Nakhabino, Krasnogorsk.
- ISHMA 50 NOVA SIT IS -150.00.00 RE, imported automation unit, 1 year warranty period according to the coupon. Repairmen of the Ishma gas heating boiler in the area of the cities of Lytkarino, Mozhaisk, Odintsovo, Volokolamsk, Sergiev-Posad, Podolsk, Naro-Fominsk, Mytishchi. The service center operates on duty, servicing the contracted owners of Ishma floor boilers in the Moscow and Tula regions.
- ISHMA 50 U IS 9901,00,00-U RE, domestic gas automatics. Service of boilers Ishma in the cities of Balashikha, Kuravskoe, Zhukovsky, Ramenskoe and Voskresensk. The repair department of the service center works according to the production instructions and recommendations of the Ishma heating equipment manufacturer.
Boilers with forced circulation of the heat carrier, power 63, 80, 100 kW:
- ISHMA 63 UE IS -9902.00.00 UE RE, electrically dependent, UE
- ISHMA 80 UE IS 9902,00,00 UE, volatile, UE
- ISHMA 100 UE Is - 9902,00,00 UE, RE, UE series
- ISHMA 100 Elletrosit IS-225.00.00, automation made in Italy
- ISHMA 100 U2 IS-9902.00.00 U2, Russian automatics
- ISHMA 80 Elletrosit IS-225.00.00, foreign automation
- ISHMA80 U2 IS-9902.00.00 U2, Ulyanovsk automation unit
- ISHMA63 U2 IS-9902.00.00 U2, Ulyanovsk automation assembly
- ISHMA 63 Elletrosit IS-225.00.00, imported automation
The high-quality repair of boilers is guaranteed by the manufacturer of this equipment with its stable supply of spare parts and components for the uninterrupted repair of ISHMA heating boilers. The simple design, taking into account the modern technical characteristics of ISHMA gas boilers, at the same time reliability and safety during operation, puts these Russian heating boilers on a par with the world leaders in heating technology. This is not a simple comparison is confirmed by the minimization of repairs of ISHMA gas boilers.
Every year, improving the quality indicators of ISHMA heating boilers, manufacturers have achieved superiority in the repair of their boilers in comparison with other factories, and the cost of spare parts for boilers and repair work differs at times, the earth and the sky are involuntarily remembered. Repair of non-volatile gas boilers ISHMA is an indicator of the perfection and professionalism of service engineers when solving urgent repairs in the winter. You will find practical advice and feedback on the repair of ISHMA gas boilers in the "Articles" section of our portal, where you will highlight a lot of new and useful things.
Repair of gas boilers AOGV in the Moscow region
Repair work with floor-standing gas boilers AOGV, AKGV, AOGVK is mainly associated with minor problems of a domestic nature. When using low-quality water in the heating system, the AOGV heat exchanger flowed; AKGV does not start or does not produce hot water; the gas heating device is water-heating according to the description, but does not want to heat and cannot. The classic Russian question “What is to be done?” Arises.
Repair of Russian gas boilers of the AOGV type begins from the entrance to the furnace room. If the boiler room is clean, there is no dirt and dust, this is already 30% of the fact that the AOGV boiler will last a long time without serious breakdowns. All hot water boilers of this type are produced with an open combustion chamber, that is, the chimney with good draft works great as a vacuum cleaner, drawing in not only dust, but also small debris, which impairs the heat exchange of the heater.
It is difficult for the automation unit to put up with this and often domestic AOGV are faulty due to such an incorrect attitude of users of this heating technique in their home. The cheapness of the outdoor AOGV has always attracted the Russian consumer. The low cost of repairs and original spare parts for the gas unit, the real availability of each AOGV owner to a “painless” replacement of the boiler with a new similar water heating device - there is a great advantage for the owners of this heating equipment in a private house. But there is one "but".
If AOGV is an inexpensive household heating boiler, and the reviews about this device are excellent, the appearance of the AGV gas boiler, to put it mildly, is not the same as that of modern French gas equipment, this does not mean that annual maintenance, planned replacement of spare parts and parts, chemical washing of the steel heat exchanger and other preventive measures provided for by the norms, rules of warranty and operation of heating equipment from the manufacturer.
AOGV and its varieties are an excellent high-quality Russian-made gas boiler. The repair base of this water heating device is provided by the manufacturer much better than for similar imported heating boilers. With conscientious and timely service, AOGV can serve for several decades. Our company has been servicing this kind of boilers for more than 20 years without replacing the heat exchanger, prolongation of the maintenance contract is always welcomed by our specialists. Replacing a domestic heater is the most extreme measure during maintenance!
Repair of the AOGV control unit is accompanied by replacement after 7-10 years due to mechanical wear of the gas automation parts. Frequent repairs of gas boilers AOGV are associated with the cessation of gas supply to the main burner. These moments are found both in electrically dependent and in boilers that are not dependent on electric current (non-volatile). Here you need to take into account the repair of automatic equipment for traction, repair of automatic equipment for overheating and other nuances that experienced specialists in the repair of gas equipment AOGV will always find out.
Repair of the VS8620S automation unit in AOGV electrically dependent boilers is practically impossible. The manufacturer of automatics for gas equipment Honeywell provides for the safety and correct operation of the gas valve setting by means of pressure measurement fittings, the ignition flame adjustment. Careful handling of the rotating parts of the unit, such as the thermostat, the automatic start button, ensures long-term comfortable operation of the VS8620C automation unit and the boiler as a whole.
The repair of the SIT 820 NOVA control unit initially takes into account the subtle points of tuning the piezo ignition and the design of the igniter. During planned repairs, the high-quality operation of the thermocouple must not be overlooked and it is imperative to check the internal current - the basis of the device's performance. In many cases, the automatic safety shutdown of the gas supply to the main burner provides not only the circuit of the automation unit, but also the so-called floating errors that qualified craftsmen are aware of, and specialists of the "general" always offer replacement of any part.
If you decide to save money - make the right investment in a quality repair of the Russian gas boiler AOGV with our service engineers from the technical support center in the Moscow region. Find out more when contacting the company's emergency dispatch service for the implementation of free diagnostics by phone. The on-duty engineer will discard everything unnecessary in the past and issue a qualified resume for your heater.
Repair of gas boilers Protherm (Proterm)
Gas boilers Proterm produced in Slovakia have established themselves as high-quality heating equipment at relatively low prices, given the cost of similar heating boilers from well-known foreign companies.
Repair of gas wall and floor gas boilers Proterm is inexpensive, given the quality of the equipment itself and spare parts for boilers. Parts for replacement are analogs of spare parts for other manufacturers, which emphasizes the authority of Proterm on the world market of heating equipment and in the Russian Federation.
Our company carries out repair and maintenance of gas boilers Proterm for the following models of floor-standing gas boilers: Wolf KSO, Bear TLO, Bear PLO, Bear KLOM, Bear KLZ, Grizzly KLO. Boilers of this type differ in the design of use, the type of cast-iron heat exchanger and, if possible, the use of natural circulation in the heating system.
Non-volatile gas boilers Proterm operate smoothly, like Russian boilers that do not depend on electricity. The most common malfunctions in floor-standing gas boilers Proterm occur from the lack of basic maintenance for several years, here you can observe: overheating of the gas boiler Proterm at minimum operating power modes; microcracks in the sections of the cast iron heat exchanger; with high-quality operation of the Proterm floor gas boiler, heating radiators in a private house do not warm up; the atmospheric burner of the gas boiler Proterm does not start or after starting it goes out; faulty piezo ignition and many other breakdowns of gas equipment Proterm.
Repair of gas boilers Siberia
Repair of gas wall-mounted and floor-standing boilers of JSC "Rostovgazoapparat" does not happen often according to the reviews of our company's experts. In this regard, I would like to note the high level of supply of spare parts and components for hot water gas boilers Siberia, one of the best examples of gas equipment for home heating.
Repair of Siberia boilers is carried out on the territory of the Russian Federation, in almost all regions. The availability of parts always and everywhere is due to their low cost, simple production and professional supply. Siberia boilers are being repaired due to untimely maintenance or due to a service life that can be calculated in decades. If many manufacturers made the same high-quality gas heating equipment as the Rostov plant, then many service and repair organizations for the maintenance of boilers in private houses would be idle without work.
So, let's turn to possible repair situations for Siberia gas boilers. These include the option of loss of boiler power during the heating period during severe frosts, when the drop in gas pressure in the mainline is determined by the huge analysis of gaseous fuel by local consumers. In this situation, this kind of "malfunction" is possible in almost all gas boilers.
Malfunctions and the corresponding repair of wall-mounted gas boilers Siberia is practically similar to the repair of all wall-mounted heating boilers of this type from various manufacturers. This is due to the safety control system and the design of the wall heater.
There may be errors in the operation of the boiler in terms of shutting off the gas supply by the modulator valve. Single-circuit and double-circuit heating boilers have similar malfunctions, but in boilers using a circuit for preparing hot water, breakdowns are added associated with the operability of the hot water supply of a double-circuit wall-mounted Siberia boiler.
As we have already said, our employees are trained by the manufacturers of gas equipment and are able to work with any technique. Our company carries out repair of gas boilers of any brands: German Vaillant and Buderus, Italian Ferroli, Ariston, Baxi and Beretta, Slovak Proterm, French De Dietrich, South Korean Navien, Japanese Rinnai, Bosch, as well as Russian manufacturers, the best of which and not inferior to imported samples are Zhukovsky Machine-Building Plant, Taganrog Association Lemax and St. Petersburg Neva.When setting up, we use imported devices, which are rarely found in the hands of other engineers.
Repair of wall and floor gas heating boilers
If you suspect a deviation from the normal operation of the equipment or it simply does not turn on, you can easily call a repairman for gas boilers at home in a short time by calling our company or leaving a request on the website. Original spare parts that you may need will always be with you, so that assistance can be provided immediately on the spot and not delayed for a long time. Indeed, sometimes even a few days without heat in winter can become a global problem.Our masters will cope with any problem and make the operation of your heating system reliable and safe. The company "Victoria" has been repairing wall and floor gas boilers at home in the Moscow region for more than 10 years. We can also identify any malfunctions of the system as a whole and eliminate them, from radiators to chimneys. The range of the company's services allows us to cooperate with us in several areas at once with favorable prices, without wasting time looking for other performers.
We have a wide geographical coverage of our presence. Calling a gas boiler repair technician at home is possible not only in the Lyubertsy and Ramensky districts, the urban districts of Bronnitsy, Kolomna and Zhukovsky, where our offices are located, but also in other cities and towns in the Moscow region. We can consider other nearby territories on request.
Please note that urgent repairs of gas heating boilers are most often required for equipment that has not undergone regular maintenance. Periodic maintenance is much cheaper than expensive parts, plus you have nothing to worry about.
Prices for the repair of gas boilers in the Moscow region
The cost depends on the availability of an agreement with our company for the maintenance of VDGO or VKGO. We offer high quality and the lowest prices for the repair of gas boilers at home in the Moscow region. The price list below will help you find out the exact cost.If you have entered into a contract with us for the maintenance of VDGO, then 1 repair and 1 emergency free trips are included in its terms, which is very convenient for you.
| N / a | Name of works | Unit. | Price, rub. | ||||||||
| Under contract* | Without an agreement | ||||||||||
| LEAVING THE MASTER WITHOUT AGREEMENT | VDGO | VKGO | VDGO | VKGO | |||||||
| 1 | Weekday | departure | is free | is free | 2500 | 2500 | |||||
| 2 | Weekdays night | departure | is free | is free | 3500 | 3500 | |||||
| 3 | Day off | departure | is free | is free | 3500 | 3500 | |||||
| 4 | Weekend night | departure | is free | is free | 4500 | 4500 | |||||
| Repair / adjustment of wall and floor gas boilers | |||||||||||
| 1 | PCS | 1500 | 1500 | 1500 | 1500 | ||||||
| 2 | Setting up a gas multiblock | PCS | 2000 | 2000 | 2000 | 2000 | |||||
| 3 | PCS | 1500 | 1500 | 1500 | 1500 | ||||||
| 4 | PCS | 3000 | 3000 | 3000 | 3000 | ||||||
| 5 | PCS | 500 | 500 | 500 | 500 | ||||||
| 6 | Circulation pump revision | PCS | 700 | 700 | 700 | 700 | |||||
| 7 | PCS | 2000 | 2000 | 2000 | 2000 | ||||||
| 8 | Cleaning the built-in filters | PCS | 500 | 500 | 500 | 500 | |||||
| 9 | PCS | 3500 | 3500 | 3500 | 3500 | ||||||
| Repair / adjustment of gas atmospheric boilers | |||||||||||
| 11 | Replacement of a spare part / functional unit | PCS | 1500 | 1500 | 1500 | 1500 | |||||
| 12 | PCS | 2000 | 2000 | 2000 | 2000 | ||||||
| 13 | Cleaning, setting the gaps of the ionization and ignition electrodes | PCS | 2500 | 2500 | 2500 | 2500 | |||||
| 14 | Conversion to liquefied gas | PCS | 3500 | 3500 | 3500 | 3500 | |||||
| 15 | Cleaning (flushing) the boiler body | PCS | 3500 | 3500 | 3500 | 3500 | |||||
|
Repair / adjustment of gas pressurized boilers (low temperature / condensing) |
|||||||||||
| 16 | Replacement of a spare part / functional unit | PCS | 1500 | 1500 | 1500 | 1500 | |||||
| 17 | Air damper setting | PCS | 2000 | 2000 | 2000 | 2000 | |||||
| 18 | Gas throttle setting | PCS | 1500 | 1500 | 1500 | 1500 | |||||
| 19 | Gas multiblock setting (per stage) | PCS | 2500 | 2500 | 2500 | 2500 | |||||
| 20 | Checking the chimney draft (injection / discharge) | PCS | 500 | 500 | 500 | 500 | |||||
| 21 | Adjusting the air-fuel ratio | PCS | 6500 | 6500 | 6500 | 6500 | |||||
| 22 | Setting the working pressure in the expansion vessel | PCS | 1500 | 1500 | 1500 | 1500 | |||||
| 23 | Condensing mode setting | PCS | 1500 | 1500 | 1500 | 1500 | |||||
| 24 | Air pressure switch setting | PCS | 1500 | 1500 | 1500 | 1500 | |||||
| 25 | Gas pressure switch setting | PCS | 1500 | 1500 | 1500 | 1500 | |||||
| 26 | Cleaning, setting the gaps of the ionization and ignition electrodes | PCS | 2500 | 2500 | 2500 | 2500 | |||||
| 27 | Boiler body cleaning up to 72 kW | PCS | 4500 | 4500 | 4500 | 4500 | |||||
| 28 | Boiler body cleaning from 72 kW to 140 kW | PCS | 5500 | 5500 | 5500 | 5500 | |||||
| 29 | Boiler body cleaning over 140 kW | PCS | 7500 | 7500 | 7500 | 7500 | |||||