Technoelast- SBS-modified * rolled roofing and waterproofing material of increased reliability.
The Technoelast fabric consists of a synthetic non-woven base (polyester or fiberglass) coated on both sides with a bitumen-polymer binder containing a polymer modifier.
Appointment. Installation of a waterproofing membrane of concrete and reinforced concrete foundations (foundation, basement, tunnels, garage) and waterproofing of a flat roof to protect against the negative effects of moisture.
Waterproofing Technoelast retains its consumer properties during operation in a wide range of temperature fluctuations, withstands high mechanical loads.
The use of this roofing and waterproofing material will make it possible to form a reliable, biostable and durable waterproofing carpet with a large margin of safety.
The inclusion of polymer additives in the production of roll waterproofing materials increases their flexibility and heat resistance, protects the top layer of bitumen from aging, destruction and roof leaks.
On roll materials produced with the use of polymer additives, protective dressing adheres much better, which gives additional protection to the waterproofing carpet from overheating and the destructive effects of UV rays during the operation of a flat roof.
Therefore, a roofing waterproofing carpet based on bitumen-polymer materials has a significantly longer service life than materials based on oxidized bitumen.
The logo printed on the protective film on the inner side of the roll web is used as an additional indicator indicating the sufficient heating of the cover bitumen.
Technoelast roofing material can be used in all climatic zones of Russia.
Two main types of Technoelast have been developed depending on the scope of application of the roll waterproofing material:
- Technoelast P - it is used as the bottom layer of roofing carpet and waterproofing of building structures. The upper and lower (welded) layer of the web is covered with a polymer film that prevents it from sticking when stored in a roll. This type includes: technoelast HPP, technoelast EPP.
- Technoelast K - used for the device of the upper layer of waterproofing roofing carpet. The outer side of the web of the roll is covered with a protective dressing to protect the coating layer from the negative effects of various atmospheric phenomena and exposure to UV rays. Internal - with a protective film. This type includes: technoelast TKP, technoelast EKP.
Technical characteristics of Technoelast
| Indicator name | Technoelast | |||
| HPP | EPP | TCH | ECP | |
| The basis | glass canvas | polyester | fiberglass | polyester |
| Thickness, mm (± 0.1 mm) | 3,0 | 4,0 | 4,2 | 4,2 |
| Weight of 1 m2, kg, (± 0.25 kg) | 3,9 | 4,95 | 5,2 | 5,2 |
| Potential durability of the material, confirmed by the test report, years | 25-30 | 25-30 | ||
| Roof overhaul life up to, years (based on expert estimates) | 22 | 22 | ||
| Breaking force in longitudinal / transverse direction, H, not less | 294/- | 600/400 | 800/900 | 600/400 |
| Flexibility temperature on a bar R \u003d 25 mm and R \u003d 10 mm, ° C, not higher | -25 | -25 | -25 | -25 |
| Heat resistance, ° C, not less | 100 | 100 | 100 | 100 |
| Water absorption for 24 hours,% by weight, no more | 1 | 1 | 1 | 1 |
| Brittleness temperature of the binder, ° C, not higher | -35 | -35 | -35 | -35 |
| Protective coating type: | ||||
| upper side | ||||
| down side | film without logo | slate | ||
| film with logo |
Film with logo |
|||
| Length / width, m | 10x1 | 10x1 | 10x1 | 10x1 |
| Roll weight | Calculated based on the weight of 1m2 | |||
| Number of rolls on a pallet, pcs | 25 | 20 | 20 | 20 |
Technoelast laying. Cloths of material are fused on a pre-prepared and primed base of a flat roof, foundation, basement, concrete building structures using a gas burner. Read more about laying bituminous surfacing materials.
For a quick guide to preparing the base of a flat roof for installing roll waterproofing, read.
Below is a description of the installation of roof waterproofing from the TechnoNICOL company, which shows the main stages of the installation of a waterproofing carpet made of fusion materials.
Potential material life. The potential durability of the material, according to the test report, is 25-30 years. The degree of material wear after five years of operation is only 22%, and the appearance of the first leaks due to material wear is only after 18 years of operation.
The main area of \u200b\u200bapplication of the roll-on waterproofing material Technoelast:
- waterproofing of the foundation, basement, building structures, reinforced concrete floors and other concrete bases (Technoelast HPP, EPP);
- the bottom layer when installing a two-layer roof covering for a flat roof, including the base made of a prefabricated screed (Technoelast HPP, EPP);
- top layer when installing a new or repairing an operating waterproofing carpet of a flat roof (Technoelast TKP, EKP);
- an additional reinforcing layer when installing abutments to vertical surfaces: parapets, walls, technical structures (Technoelast HPP, EPP).
Advantages of using Technoelast material:
- high reliability;
- long service life - 30 years;
- multifunctionality - the ability to use on various operational bases and temperature conditions;
- elasticity of the material at low temperatures - convenient for laying in the winter. Allows to carry out waterproofing works in different seasons of the year. Application temperature up to -30 ° С;
- low operating costs of the roof. Despite the high basic cost of the roofing device, the cost of refurbishing a roof made of bitumen-polymer materials will cost almost two times cheaper (53%) than repairing a roof made of bituminous materials on oxidized bitumen;
- high production standards and advanced technologies of the leading manufacturer of roll waterproofing in Russia.
Price.You can find out the current prices for the material and buy Technoelast by calling the contact phone. The price for Technoelast material per 1 m2 depends on the scope of delivery.
The development of technologies makes it possible to improve the characteristics of traditional materials for construction, including for roofing. TechnoNICOL Technoelast EPP and other types of waterproofing deposited material are among the popular new products on the construction market.
Technoelast in a roll
Description
Technoelast is a roll material that is resistant to biological degradation and has high waterproofing properties. Manufacturing technology consists in double-sided application on a durable, flexible base made of polyester fiber or glass fabric, a special waterproof composition. They are modified bitumen, to which SBS thermoplastic is added.
SBS is a polymer material (artificial rubber) with high functional characteristics. It allows the bitumen to remain elastic at low temperatures, so that the waterproofing coating does not crack in frost.
Fillers are included in the polymer-bitumen composition - dolomite, talc, etc. The outer layer on the back side is a polymer film that prevents the material from sticking when stored in a roll. The film is melted during the installation of the flooring. The top layer can also be a film (this allows you to create a durable multi-layer waterproofing carpet) or a protective mineral dressing is used - fine or coarse-grained, for which sand, shale, etc. are used. with the addition of a binder.
Technoelast structure Purpose
The use of the material is associated with the protection of structures from the destructive effects of moisture. Technoelastom waterproof:
- building structures of various types (walls, floors, assembly joints);
- surfaces in direct contact with moisture (basements, foundations, swimming pools);
- all types of roofing systems (pitched, flat, including operated, "green", etc.).
Reliable and easy-to-install material allows you to build a waterproofing carpet, which protects structures 100% from moisture, water vapor, condensate, and gas penetration. The device of such waterproofing is allowed in any regions with any climate, taking into account the current norms of SNiP 23-01-99.
Main advantages
The technical characteristics of the rolled deposited material Technoelast meet not only Russian but also world requirements. Technoelast waterproofing and roofing coverings are designed for operation in regions with any climate, including areas with severe weather conditions. The production of multifunctional material is carried out on modern equipment using advanced technology, using high quality raw materials.
Technoelast ensures absolute waterproofness of the structure, regardless of the place where it is installed - as part of the roofing system, during the construction of hydraulic structures, arrangement of foundation protection, etc. Technoelast is used both on the surface and inside structures, therefore it is considered universal.
Brands and technical parameters
Technoelast waterproofing is available in several versions for various applications and operating conditions. Abbreviations that designate types of material, are decrypted according to the following principle:
- The first letter is the base material. E - ether (polyester), T - fabric, X - canvas.
- The second letter is the top sheeting. P - film or fine-grained dressing, K - crumb.
- The third letter is the bottom protective layer. P - film or fine-grained dressing, K - crumb.
EPP
Technoelast EPP is used for moisture protection of building structures, including foundation foundations, as well as for laying underlayment when arranging roofing on roofs of any type. It has absolute waterproofness, due to its high elasticity, it is convenient to work.
The basis of the material is polyester fiber, it is coated with SBS-modified bitumen with a filler. The lower protective layer is made of film, the upper one is made of fine-grained dusting.
The thickness of the material is 4.0 mm, the weight of 1 m 2 is 4.95 kg, the weight of the roll is 50 kg, the service life is 20-25 years.
HPP
Technoelast HPP is designed to create the first backing layer when installing a roofing cake, it is used in the field of waterproofing various building elements. It is characterized by frost resistance and heat resistance.
The basis is fiberglass with purified bitumen with a polymer additive (SBS) and filler applied on both sides. The protective coating of the top and back sides is a film that prevents the web from sticking together after being rolled into a roll.
HPP technoelast is distinguished by its minimum thickness, since it does not include polyester and mineral chips of the outer coating. The material is designed for light loads.
The thickness is 3 mm, the weight of 1 m 2 is 3.88 kg, the weight of one roll is 39 kg, the service life is 20-25 years.
ECP
Technoelast EKP is a roofing waterproofing material designed for installation of the upper layer of roofing. Together, Technoelast EPP and EKP make it possible to mount a reliable roof designed for high loads. EKP roll material is also suitable for basement waterproofing. The advantages include resistance to cracking in severe frost.
The base is made of polyester, bitumen with the addition of thermoplastic and filler performs the waterproofing function. The back side of the material is covered with a protective polymer film, the top coating is made of coarse mineral chips, due to which the roofing material is resistant to mechanical damage, ultraviolet radiation and other influences.
Thickness - 4.2 mm, weight of 1 m 2 - 5.25 kg, roll weight - 53 kg, service life - 20-25 years.
TCH
Technoelast TKP is a material designed for high loads. Suitable for installation of waterproofing protection of underground structures (basements, foundations). When arranging roofs on pitched and flat roofs, it can be used without additional lining materials. Differs in strength and durability, vapor-tight, fits perfectly with a flat cloth.
TECHNOELAST is a roll roofing material of "PREMIUM" class
TECHNOELAST belongs to polymer-bitumen materials. In the production of this material, modifier polymers are used, which make the material more elastic and resistant to both low and high temperatures. SBS-modifier (styrene-butadiene-styrene), which is sometimes called "synthetic rubber", is used in the production of technoelast. This polymer additive makes the material frost-resistant (it can be laid at temperatures up to -250C) and heat-resistant (the material does not "drain" from the roof, that is, it retains its shape during prolonged heat even on a small slope).
TECHNOELAST is used both for waterproofing and for the installation of the lower and upper layers of the roof carpet of buildings and structures. Due to its excellent physical and mechanical characteristics, it meets all the requirements of increased reliability and can be used in all climatic regions. TECHNOELAST is used where only the highest reliability is needed. As a rule, these are business centers, underground parking lots, hotels and other premium facilities.
For the production of the upper layer of technoelast, coarse-grained dressing (slate) is used, which protects the material from ultraviolet rays.
Technoelast is laid by fusing with a gas burner. The surface must first be primed with a primer for better adhesion to the surface. The top layer of the material (with dusting), as a rule, is laid on the previously laid bottom layer of the roofing carpet (when installing a two-layer roof).
TECHNOELAST is produced on two types of bases: polyester canvas (EKP-5.0 / EPP-4.0) and fiberglass (TKP-5.0).
Specifications
| Basic physical and mechanical characteristics | EKP-5.0 |
TKP-5.0 |
Technoelast EPP-4.5 |
|---|---|---|---|
| Indicator name: |
|
|
|
| Thickness, mm (± 0.1mm) | 4,2 | 4,2 | 4,0 |
| Weight 1m2, kg (± 0.25kg) | 5,2 | 5,2 | 4,95 |
| Breaking strength in tension, N, not less | 600/400 | 800/900 | 600/400 |
| Flexibility temperature on a bar with R \u003d 25 ± 0.2 mm, ºС, not higher | -25 | -25 | -25 |
| Heat resistance, ºС, not less | 100 | 100 | 100 |
| Type of protective coating |
|
|
|
| upper protective layer | coarse dressing | coarse dressing | film with logo |
| bottom protective layer | film | film | film |
| Service life, years | 25 | 25 | 25 |
| Fire-technical indicators: |
|
|
|
| flame spread over the surface | RP1 | RP1 | RP1 |
| flammability | AT 2 | AT 2 | AT 2 |
| flammability group | G4 | G4 | G4 |
|
SBS-modified roofing and waterproofing material (service life 25 ... 30 years). Flexibility on a bar (R \u003d 10/25 mm) -25 o С, Heat resistance +100 o С. Basis - polyester Density: 4 kg / m2 |
Price: 177.98 rubles * Minimum order quantity for waterproofing: 500 m 2! |
| Cover type, top / bottom | film / film |
| Weight, kg / m 2, not less | 4,95 |
| Breaking force in tension in longitudinal / transverse direction, N, not less | 600/400 |
| Thickness, mm | 4 |
| Water absorption for 24 hours,% by weight, no more | 1 |
| Binder weight from the side to be welded, kg / m 2, not less | 2 |
| Flexibility temperature on the bar R \u003d 25mm, о С, not higher | -25 |
| Flexibility temperature on a bar R \u003d 10 mm, о С, not higher | -25 |
| Brittleness temperature of the binder, о С, not higher | -35 |
| Water resistance at a pressure not less than 0.2 MPa, for 2 hours | absolute |
| Length, m | 10 |
| Width, m | 1 |
| Heat resistance, ° С, not less | 100 |
| A type | lining |
| The basis | polyester |
| Roll weight, kg | 45 |
Purpose, scope of waterproofing Technoelast EPP
Technoelast EPP is used for organizing the roofing of structures and buildings, waterproofing foundations, basements and other structures, the functionality of which is associated with constant pressure and the danger of deformation. Technoelast EPP is a SBS-modified multifunctional waterproofing and roofing material with the highest degree of reliability. Its installation is carried out by the fusion method.
Technoelast EPP is a lining material that requires the use of a top covering layer for a properly arranged roof or waterproofing. It is characterized as extremely practical in use and installation, since in the process of pressure and loads this material does not deform, but simply stretches without destroying the integrity of its structure.
Technoelast EPP is resistant to temperature extremes and decay processes, therefore it is successfully used for waterproofing such objects:
- Underground garages
- Loadable roofs
- Metro vaults
- Industrial roofing
- Foundations
- Pools
- Boiler rooms
Technoelast EPP is ideally combined with the material for organizing the upper roof layer Technoelast EKP.
Composition of waterproofing Technoelast EPP
Technoelast EPP is a bituminous material that consists of a polyester base, a bitumen-polymer binder and a protective fusible film. The method of organizing the web can be called duplicated, since a composition of styrene-butadiene thermoplastic elastomer, bitumen and filler is applied to the base bilaterally, which, in turn, is also protected on both sides by a polymeric protective film.
Technoelast EPP is based on polyester, consisting of individual synthetic fibers. Outwardly, it looks like white polyethylene foam, the use of which guarantees the roofing material such qualities as excellent strength and resistance to atmospheric precipitation. In addition, polyester has another extremely important property - good ductility, and therefore, compared to glass fabric, which can stretch by only 2%, polyester is much more effective for use in conditions of high loads and deformations. Technoelast EPP is a biostable material.
On the lower and upper sides, the web is limited by a layer of polyethylene film, which protects the material from sticking to each other during storage and transportation in the form of rolls.
Tips for installing waterproofing Technoelast EPP
Technoelast EPP is laid by fusion with a propane torch. It is recommended to carry out the work in accordance with the "TechnoNikol Corporation's Guidelines for the Design and Installation of Roofs Made of Bitumen-Polymer Materials. For a properly organized installation of roofing and waterproofing material, it is necessary to follow the sequence of actions.
The first thing to do is to prepare the base - to clear it of debris, fill up all the pits and cracks with cement or mastic, and prime with a primer or a solution of gasoline and bitumen in a 3: 1 ratio. After the surface is completely dry, Technoelast EPP is tried on, that is, the rolls with the material are unrolled, the material is laid out on the surface, the required amount for laying is estimated, cut off with a roofing knife and rolled back into rolls. And the last stages of installation is fusing the already prepared material onto the prepared base.
Designed for waterproofing buildings, structures and building structures.
Structure:
Technoelast EPP is produced by double-sided application on a glass or polyester base of a bitumen-polymer binder consisting of bitumen, styrene-butadiene thermoplastic elastomer and filler. Fine-grained dressing and polymer film are used as a protective layer.
Specifications:
Storage
Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from the heaters.
Transportation
Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport.
Packaging Details
Pallet packing with rolls - white heat shrink bag.
Brand:
Depending on the type of dressing and the area of \u200b\u200bapplication, Technoelast is produced in two grades:
Technoelast K - with coarse-grained dressing from the front side and a polymer film or fine-grained dressing from the weld-on side of the web; it is used for the device of the upper layer of waterproofing with protection from sunlight;
Technoelast P - with fine-grained dressing or polymer film, or their combination on both sides of the web; it is used for the device of the lower layers in multilayer waterproofing of building structures (foundations, tunnels, roofs, etc.).
Technoelast is biostable.
Material Specification Table:
| Parameter name | P | |
| Coating type: | top | film without logo |
| bottom | film with logo | |
| Weight, kg / sq.m. not less | 4.95 | |
| Breaking force in tension in longitudinal / transverse direction, N, not less | on polyester | 600/400 |
| Thickness, mm | 4 | |
| Water absorption for 24 hours,% by weight, no more | 1 | |
| Binder weight from the side to be welded, kg / sq.m., Not less | 2 | |
| Flexibility temperature on a bar R \u003d 25mm, оС, not higher | -25 | |
| Water resistance at a pressure of at least 0.2 MPa for 24 hours | absolute | |
| Length \\ width, m | 10x1 | |
| Heat resistance, ° С, not less | 100 |
Manufacturing jobs:
According to the "Guidelines for the design and construction of roofs made of bituminous materials of the roofing company TechnoNIKOL", it can be used in all climatic regions according to SNiP 23-01.
Corporation "TechnoNICOL" offers modern building materials, which include roofing roll materials, bitumen, PVC membranes, waterproofing mastics, as well as thermal insulation of walls, ceilings and roofs of the house.