Warm windows for the winter with modern materials and classical methods. Getting ready for winter: how to make windows for the winter? What can be sealed wooden windows

W. the warmth of windows for the winter - the task is not particularly difficult, but here, as everywhere, there are subtleties and nuances. Basically, the warming of old windows, including plastic, operated for a long time is usually required. Consider the insulation of windows with your own hands, which can be performed quite quickly and inexpensively.

In the simplified form itself, the technology insulation technology is reduced to ensuring the tightness of all connections of the details of the windows, especially in places where opening flaps are provided. Materials for insulation of windows can be divided into two main groups:

1. Materials for sealing gaps;
2. Materials for the sealing of the River.

Old technology insulation windows for winter do it yourself

Simple and cheap technology sealing slots in old windows using paper strips, wool and tires Today, many people can cause a smile - and quite in vain. Just, quick and cheap. Of course, not for a modern apartment, but somewhere at the cottage, in old buildings, where the notorious Swedish warming of windows is simply nothing to do anything, it is very possible to use proven "grandfathers" methods. All cases then:

1. Blades of the knife neatly legitiminate the gaps in the windows of technical wool,
2. And on top to stick with a typical soap strip paper.

Dense paper tape for wind insulation is sold in almost any building of building materials and is inexpensive.

Old technology can be combined with modern materials, applying a special tape with an adhesive surface instead of paper and soap - a variety of paper tape.

Modern technology insulation technology

To provide high-quality and long-term warming of wooden windows in an apartment for the winter, it is better to resort to modern technology using silicone sealant and / or synthetic sealing materials. To warm the windows with a sealant, it is better to purchase an inexpensive tool - lever syringe. Tuba with sealant is inserted into this simple device and pressing the lever from it the required amount of silicone is squeezed out of it. It is better to use a transparent sealant if it appears on the glass, it will be unnoticed.

Warming windows sealant

First, you need to remove the glass from the window. Using a solid screwdriver with flat sting, we remove the wooden strokes holding the glass. That a screwdriver would be better in the junction between the frame and the stroke, her sting is sharpened with a file or on a grinding bar. The strokes first raise, as if "break off" from the place, throughout the perimeter of the frame, then removed at all - first the bottom, then the side and last place, holding the glass, top. After that, gently remove the glass carefully and carefully. It is necessary to make it in the plaid gloves to avoid cuts.

Leave your tips and comments below. Subscribe to

With the onset of cold weather, many think about how to insulate a dwelling without a significant cost of the family budget. The windows are the first source of the cold, as they always have a lot of cracks. Know how it is better to take the windows for the winter, each hostess should.Let us dwell on this article on the main ways.

Wooden windows for the winter are rushed most often, as they are always well blurred, even if they were correctly installed. There are many inexpensive and simple ways that can be used to get rid of cold bridges.

All of the above methods are suitable for insulating wooden windows. You can choose the most suitable method for yourself and take the windows for the winter to preserve the heat in the room.

Plastic

In the case of plastic frames, several other materials and technologies are used. Pack the windows for the winter above methods will not work.

For insulation of plastic slopes, an extruded polystyrene foam, fiberglass or mineral wool can be used. All of them are good, it is only worth choosing one that will most suit the size. After insulation, put a putty and painting of slopes. Such insulation to achieve the maximum effect is made both from the inner and outside the outdoor side during the installation process.

If the air enters the gap under the windowsill, then they need to be blown away by mounting foam. After soaring, its remnants are cut off with a knife. If necessary, spacure and paint are applied on top of the foam.

If plastic slopes have been standing for a long time, but relatively recently they began to blow, the following events will help. First, thoroughly wash the window from all sides and wipe it dry. Hook shutters and take a look at the seal: Surely he cracked and asked. Remove the old seal with a knife, degrease the grooves and get a new seal, suitable in size and thickness. In the process of work, try not to stretch and not compress the rubber, otherwise the insulation will not give the result. The sealer can also be used to make cracks on slopes and window sills.

Swedish technology

You can make windows along the modern Swedish technology, which is considered to date the most common and efficient. Just remember that it will cost such insulation very expensive, it will take a lot of time, and for work will have to attract specialists. But you will receive a warranty for 20 years.

This technology lies in the use of the super-modern window seal EUROSP. Such a sealer is good because it does not need to be glued to the surface. The tape is made in the shape of a Christmas tree, which will start in advance the grooves specifically for it. It is such a complex form that provides good clutch and long service.

Remember that the installation of such a sealer implies a partial restoration, so ultimately the cost is more expensive. EUROSPERP is successfully used for both plastic and wooden windows. But most often, he preferred the happy owners of good slopes from a natural durable tree that does not require painting.

Materials and tools

If you decide to stick the windows for the winter, be prepared for the fact that at first you will have to go through shopping and stock stores with the necessary tools and materials. What materials and tools are needed, depends on how and what kind of frames you want to insulate.

So, if we are talking about the warming of the frame in the Swedish technology, then here the whole care is better to give in the hands of specialists who will be restored and insulation.

If you decide to warm up the capitally wooden windows, then you will need a paper (you need a soap solution) or adhesive tape, scissors, a degreaser, which can be used liquid for removing acetone-based lacquer. Also be poisoned by a sufficient amount of rubber or foam insulation, which can be replaced with paper smear. If you want in addition to all overlook the glass, buy a sealant and a special gun to apply it. Also need paint to bring to the appropriate aesthetic appearance. The use of all listed materials and tools will help generate a complex warming of the window.

To take the windows for the winter of plastic, you will need only a special tape, degreaser, scissors. Mounting foam is needed if we are talking about external insulation and closing the slots under the windowsill.

You can take the windows from any material. Remember that only a comprehensive insulation combining several admissible methods at once, as well as a serious approach to work will be removed by your home from the cold and will retain the frame in normal form. To do this, you can apply both the cheapest tape for windows and expensive insulation.

We put the windows for the winter: 6 ways

With the onset of the cold season, the question of saving heat indoors is quite acute, especially if the windows are wooden. For additional insulation, methods tested for years and decades are used, effective since then, when plastic windows have not yet been invented, than to take windows to the winter is solved on the spot. It depends on the material that is in stock.

First, the windows themselves must be prepared. Previously need a spatula to beat all the old paint, which flakes and departs scales. Polish all holes, slots and holes in the frames. Pour a sintepon or cotton between sash and slopes, you can make it packs, and wet crumpled newspapers are also suitable, which as drying is dried and fill the cavities in the windows. Mark the places of connecting the frame and glass with a magazine, plasticine or scholars a narrow transparent tape from two sides each glass. After that, you need to add to the latches of cotton fabric or paper.

First method

Necessary materials:

Old sheet;
soap;
water.

A sheet of cotton or flax must be broken into a strip of 8-10 cm wide. Prepare such strips you need a lot of how many slots in the windows and window sills, so much you need and strips. The windowsill and the window is better purely wash and wipe dry. Prepare a pelvis with water. The strip of the fabric is declined to the entire length of the windowsill and is wetted with a piece of soap moistened in water. The action repeat two or three times until the fabric is soapy. Raise in one end and glue to the top edge of the window. Then make the same operation with all four parties and even additionally at the junction of window frames.

The windows for the winter are stuck tightly, except for the window. Thus, the space between the frames and indoors is better closed.

Second way

Materials:

starch;
water;
flour;
brush;
the cloth;
paper stripes.

In the second case, preliminary preparation is exactly the same, the adhesive composition is different. To do this, use homemade holter cooked on fire. For one liter of water, it is necessary to take half a glass of flour or starch. Stir and put cooking, stirring constantly. Or dilute pre-in one and a half cups of cold water and pour the thin flower into the saucepan with boiling remaining water.

What is better to stick the windows for the winter?

Cool. Apply on a strip of fabric or paper with a painting soft brush. The usual foam sponge is suitable. Such a hub can be stored no more than two days. When dried, leaves a whitish shade on the fabric, so it is better to use a white sheet for the stuffing.

Third way

Are used:

pVA glue;
water;
dishes;
fabric strips;
paper strips.

The glue is divorced to the condition of the cream and the fabric fabric can be impregnated. It is glued in the same way as in previous cases. Rods are better folded immediately into a pan with adhesive composition, having finally rolling them by the harmonica, and get one after the other as it is glued.

Fourth fashion

Need to cook:

Saucement;
the cloth;
gelatin.

Gelatin is to dilute in water and let wake up for several hours, stirring periodically.

Then add to warm water, stirring until complete dissolution. After drying, the gelatin solution acquires strength and is well glued to the window frame. Instructions and proportions are on the package.

Fifth way

Prepare to work:

Wallpaper glue;
wallpaper;
scissors;
brush;
sponge

Thin paper wallpaper cut into long strips and roll out into the rolls with an invalid outward.

Glue dilute in accordance with the instructions. Apply the glue with a paint tassel on the front side, as it should be soaked, and glued to the window. A monophonic cream or white surface will be on top, not a portion of the appearance of the window.

Sixth way

Cook

On one cup of sugar to take half a glass of water, stir and put on a weak fire, stirring all the time. Swift light syrup. It is in good fabric and glued to the window. And although the result is no worse than in previous versions, this method is suitable, if there is nothing suitable except sugar. Fabric impregnated with sweet composition can attract ants and other insects to the room. It is better to use one of the previous ways.

In addition to original methods and materials, there are also industrial products intended for insulation:

transparent scotch;
leucoplasty;
foam on a sticky basis;
assembly tape;
tape braid on a tissue basis;
foamed polyethylene on the adhesive strip.

The last list is best suited for plastic windows. And although it is believed that they are much more effective than wooden and protect the room from the receipt of cold, sometimes it happens that in places of fastening the loops or between the slopes, the slots are formed, which also need to be stuck, preventing drafts.

Protecting from cold weather: how to insulate windows for the winter

Newspapers
Paste
other methods
Advice

Nowadays, not everyone has the opportunity to put plastic windows. And the cold is no longer around the corner. Therefore, for many, the question remains how to insulate the windows for the winter.

There are enough ways to make your home warmer in the cold season.

Newspapers

This is the easiest and, probably, an old way of insulation of windows.

We take the newspaper and tear them into small pieces. The torn paper we fold into the container and fill with water until it becomes a casczyce state. The resulting "means" put all the slots in the windows.

After complete drying, the newspaper mask prepared by us will become a wonderful protection against cold winds.

By the way, I didn't know how to insulate the windows on the winter with newspapers. Moreover, this somewhat enforced method was not known. It is as follows.

For the manufacture of more reliable protection against drafts, take one glass of flour, two glasses of chalk, several pieces of newsprint. Fill it all in one glass of water and mix sour cream to the consistency. Look the problem areas with the resulting mixture of your window.

Vata.

Wati insulated windows for the winter at the time of my childhood. There are several varieties of this method of insulation. The most popular of them is this.

prepare water, household soap, cotton wool and paper;

swarte Clauster using water and soap;

while the holter is boiled, plug all the cracks in the windows of cotton. For convenience, you can use a knife;

paper cut into stripes, lubricate them with glue and stir over the wool.

But this way, how to insulate the windows for the winter cotton.

The principle of action is the same, only instead of paper should use tissue strips. So that your windows look carefully, you need to use white material.

Paste

For cooking, take a piece of household soap and water.

How to flip the window for the winter? What proven methods do you know?

Stitted soap on the grater, pour into the container with water and boil to a boil. Finished fabric stripes omit in this liquid and stick to the already regular windows.

You can use such a hobster only while it is hot. If the solution is cooled, warm it.

There is another way of cooking bracket based on starch. For its preparation, take two tablespoons of starch, mix them in one cup of cold water and slowly pour into one liter of boiling fluid. Ingredients Mix to thickening.

other methods

If you absolutely do not have a desire to mess with alert, cotton wool and newspapers can be kept heat in the apartment with the help of more modern means. Moreover, the market of business services offers a wide selection of necessary materials.

These are films, and painting stripes, and seals, and silicone sealants including.

How neatly and reliably insulate windows on the winter sealant?

We use silicone sealant in order to fill the slots and holes. Extlive it with the help of a special construction pistol.

Also perfectly retains heat and mounting foam. But it should only close the slots in the window when the window is no longer open.

A film has proven very well. You can buy it in a shopping store. It glues on the entire area of \u200b\u200bthe windows of Scotch. Together, the film is perfectly suitable and ordinary polyethylene. The window pasted on the window, it will perfectly retain heat indoors.

Knowing how to insulate windows for the winter with your own hands, and looking for confidence a few thematic videos, the most severe frosts will not be terrible.

How else can you get ready for winter, what to use windows and apartments for insulation? Here are some times tested by universal councils:

If you still doubt whether to stick the windows for the winter, remember, with colds from our apartments through the windows take up to 50% of heat.

It turns out that it is necessary to warm up not only old wooden frames, but also those plastic windows whose service life has already ended.

For insulation of the room, you can stick a special heat-reflecting screen between the wall and the radiator. It will significantly retain heat in your home.

You can close the gaps in the windows of the house by foam rubber or a special rubber seal. They will also help save warmly.

If Silicone accidentally hit the glass, wait until it freezes, and squabble with a special rubber spatula.

Glue windows soap

The man has always thought about improving living conditions and about the comfort of his house. So it was always and at all times. Do not leave special selection of strong winds and harsh winter, forcing residents of houses to stick the windows and insulate their housing. Of course, at the present stage of the construction industry, there are many modern technology sealing technologies and further heat retention. Also, no one has canceled expensive plastic windows, which may forever solve the issue of your apartment about saving heat.

But not every family can afford to buy modern windows, and just used to glue windows with soap in the winter in the old man. Or some other old and proven way, it does not matter. There are a large number of old and fairly effective methods to take the windows that remain relevant until now. We will discuss the most famous and widely used, accessible way of sealing windows using paper strips or fabric and simple economic soap.

Eliminate shortcomings

The primary task before starting the windows of windows is as follows.

There are more convenient pasting methods.

It is necessary to carefully examine all potentially dangerous places, from where it can pass the cold air into the room. Determine what method you want to insulate the windows. Then you need to purchase materials and infridate tools if there is a need. One of the easiest and most affordable methods of insulation methods is the salary of windows with soap over the winter. This is the most popular and favorite way that our grandmothers and mothers used in those years when there were no speech about other innovations. The work in principle did not require special physical effort and consisted in several stages:

thoroughly close with rags or cotton all detected slots using a knife;
cut paper strips;
pumps to wet in the soap solution and gently paste on the window frames.

The main advantage of this method is white paper or fabric is not noticeable and does not disturb the aesthetic look of the window.

The better putting the windows for the winter, so as not to blow: be insulated with the mind

Soap itself simultaneously serves as glue and sealant, and also does not miss the cold, no wind. Also sliced \u200b\u200bpaper or tissue strips can be used several times, without losing the quality of wind insulation.

The disadvantage of this budget method is that with a sharp drop temperature, the paper may turn off.

Upon the occurrence of the warm season, the strip of paper or fabric can be easily and without particular physical effort, simply mixing them with warm water. Usually, old wooden windows are so very affordable and efficient. In addition, instead of wool you can use other materials that are in the farm.
http://www.youtube.com/watch?v\u003ddiwmea1rpli.

Before cooling, each person begins to think over such an important

question: How to save heat and insulate windows?

The relevant and sharper is this question with increasing energy prices. It is known that poorly saved windows do not retain half the heat. Now there are modern insulating materials that allow you to effectively accumulate windows and contribute to the impressive conservation of heat. But with such a variety of funds, the choice always remains only for a person, what method of insulation of windows modern or Dedovsky choose.

How to make windows for the winter?

Before the onset of cold, everyone thinks over the question: how to make windows with warm. With a constant increase in energy prices, this problem rises especially sharply. After all, it is known that because of badly insulated windows is lost up to half of the heat. Modern insulating materials are quite diverse, and their use leads to significant heat conservation. Warming windows in the apartment and, accordingly, the refusal to use electrical heaters will allow to obtain electricity savings per year to 4000 kW. And this is a significant amount.

You can cut the paper on the strips and use the soap to attach this design. Some use silicone sealant or tape for these purposes. You can use glue for plastic windows. Methods are very much. The use of modern thermal materials has significantly simplified this procedure. With accurately comply with the instruction, the temperature indoors can rise by 5-6 degrees.

Than stuck the windows

Warming windows with paper

The oldest way of insulation is the tape. It is sold in rolls. To stick it, you need to apply some adhesive basis. Sometimes soap is used for such a basis, sometimes shovels on flour. Sometimes, following the grandmother's recipes, even kefir use for adhesive bases. However, as a rule, such a design, where the insulation is a tape, keeps long and poorly retains heat.

Warming windows with paper

Warming with tape for windows

http://www.youtube.com/watch?v\u003dyckg9-hoyfm Video CAN't Be Loaded: Warm windows (http://www.youtube.com/watch?v\u003dyckg9-hoyfm)

The easiest way is the greasy scotch.

But, as a rule, such materials are understood in September-October. And the Special Scotch has no successful for saving the windows in the season just not to find.

In such cases, you can use the usual wide scotch. For insulation, you will also need a hairdryer and wool. The hairdryer is needed in case of icing - to dry the land. If you carefully do not dry the place of sticking with scotch, then it will immediately dare. It is better to buy cotton in a pharmacy (you need to take non-sterile). From it, roll the harnesses, which thoroughly close the gaps. If the slots are narrow, then you can do without cotton.

From above on the dried window, we glue the tape. This method of pasting is the most economical and relatively fast. But he has its drawbacks: Scotch can fall off and have to be bold.

Warming windows with the help of foam rubber

Blowing foam in the adhesive basis is another economy option. There is a lot of such insulation in stores in stores. It is suitable for wooden, and for plastic windows. The adhesive base of the foam rubber will hold the insulation throughout the winter. The only drawback is the absorption of a large amount of moisture.

Due to this, the tightness of the foam strips is reduced over time.

The insulation of the window is Poroolone

Warming with silicone sealant

The core of silicone sealant is more suitable for wooden windows. Before starting, it is necessary to remove the strokes. The sealant is applied by a subtle layer in the grooves between the glass and the frame, in the frame slit, as well as between the frame and the windowsill. Before applying it, it should be carefully cleaned from dust. To apply sealant, use a special construction gun. The nozzle on the tube needs to be trimmed by the label. Only after that the sealant can be installed in the gun and use. After frozen by a knife or spatula, you can remove the extra silicone substance. After that, the Silicone establishes the strokes.

Warming with silicone sealant

Warming with window dressing

It is possible insulation with the help of window dressing. Such a putty is similar to gray plasticine. You need to warm it well and close all the gaps. When the mask will freeze, it becomes very dense and does not let the air. In the spring, it will be possible to get rid of this smell. For this, it is enough just to open the sash and scrape it with a knife. Such a putty for sale in household stores in a carefully packed state. In the open form, it is impossible to store, it will quickly come into disrepair.

How to insulate windows for winter with your own hands

One package is usually designed for a whole window. However, it is necessary to take into account that work on insulation with the help of a putty will require patience and perfection from you.

Warming with window dressing

Watching windows using a rubber seal

Its thickness is 2-3.5 mm. One pack of the seal "E" (10-12 m) should be enough for 4 windows. The category "D" category (3-8 mm) is designed for wider gaps, and it is better to use it for wooden windows. The R "class seal has a width of 3 to 5.5 mm suitable for plastic and wooden. The advantages are obvious: too much time will not need to fulfill work, this material is durable and does not absorb moisture.
To heat the rubberized insulation, the surface should be thoroughly washed and dried. Otherwise, the adhesive base of the seal will slip, and its grip will be unreliable.

Watching windows using a rubber seal

Warming with glue for plastic windows

Warming can also be made by special glue. This material can be used for sealing slots and joints, as well as perform the function of the sealing seam, as it retains relative elasticity. To use glue, it is necessary to clean the window well from dust and moisture. For sealing cracks, the glue is usually not smeared, but specifically leave a small roller, which disappears in the drying process. Drying time of some types of such glue is up to 8 weeks. Glue in 310 ml cartridges are produced, working with it is produced using a construction pistol. An important advantage of working with such glue is its white color, which provides complete camps of the slots. Glue for plastic windows can be seams to 5 mm.

When working with glue, the following precautions must be observed:

while working with glue, fresh air is needed;
it is prohibited nearby smoking and the use of open fire;
it is forbidden to drain the remnants of glue into the sewer;
do not allow glue into the eyes.

Thus, there are many ways to insulate the windows. But any insulation that you choose should perform your function - take care of the warmth of your home.

As you know, in winter, it is through the windows that goes the most heat out of the room, which means that they need to be insulated as quickly as possible. In addition, it is enough to do it yourself, and such insulation is inexpensive.

Our ancestors knew how to properly close the gaps in the windows so that in the winter in the house there was warm, and it took a little firewood. Now plastic double-glazed windows are used much more often, and manufacturers claim that they do not produce heat at all, nevertheless buyers of a completely different opinion on this subject: "Still from plastic windows blowing."

Already cold, and it's time to take care of the preservation of heat. Therefore, today we will look at insulation options for all types of windows so that in the winter comfort, your home does not leave.

Warming up wooden windows

Many people prefer not to change traditional wooden windows on plastic. But it is wooden windows that require special care and careful insulation every winter. To do this, there are several of the most common methods of insulation of wooden windows:

The windows are rushed with paper strips or scotch. It is not always practical: if you need to open the window, then you will have to be strained again, and from traces of glue to get rid of it;
For insulation uses a putty. It can melt and flush at high temperatures, blurring and windowsill, and frame;
Stripes of wool or fabric are clogged into the slits in the frames. Also not the most practical option.

But we will look at the option, which looks more aesthetic, and will serve you reliably for many years.

First of all, you should be stockpile with the necessary materials. There are only two of them, and they are quite accessible in any construction or economic store:

Frost-resistant silicone sealant, colorless or under the color of the frame;
Rubber seal on a sticky basis.

To find out how much the sealer need, measure the perimeter of all sash, fold and divide on 2. The seal is sold in a dual form, and we will glue it in 1 row, dividing into two layers.

Your main task is to get rid of the draft. To start, cross the glass. To do this, apply the sealant with a thin strip of the joints of the glass and the frame, and then accurately spend along the seam of the rubber spatula. Thus, speak all the windows both on the interior and on the outer frames.

Now you need to cry the rubber seal outside all the sash around the perimeter. Since the seal has a large cross section, and it is easily compressed, all the cracks overlap quite tightly. In order for the sticky layer on the seal well, the frame must be clean, without peeling paint. Pre-wipe the surface with acetone or solvent. Clear the edges of the seal with glue or lift wallpaper nails so that it does not fly away. Now your windows are made of wood, and easily open them.

And what if the windows are old? Warming of old wooden windows

Old wooden windows, which are still in operation, are unlikely to meet new requirements for soundproofing, tightness and thermal conductivity. In addition, they have already fucked and crackled, and the replacement is not noone. Therefore, the insulation of old wooden windows requires a cautious approach.

Use foambone stripes for the insulation of old windows. They need to be uniformly located in the rolls of the frames using a flat stupid object, for example, dumping or knife. After that, proof insulated areas of paper strips, a missing soap solution or a hubble. For convenience, you can use a wide scotch.
Often, paraffin is used for the treatment of slots, pre-melted on a water bath and heated to 70 degrees. With the help of a syringe without a needle, liquid paraffin spill the slots in the window.
Seals are very popular from modern means: polyvinyl chloride, foam and rubber. The type of seal seal depends on the width of the slots, the quality of the frame, its state, as well as on the temperature.
One of the most effective insulation materials is called a tubular profile. Its advantages over the means described above are that it is inconspicuous, has a long service life and retains tightness when opening and closing windows.
Silicone sealant will not only serve as a good insulation, but also helps to consolidate the cramped frame. True, the process of working with this material is quite time-consuming, and it looks like more than a simple insulation before in winter.

The most important thing in working with old windows is to be careful that the frames should not be changed completely. It is better to spend more time and use more expensive, but reliable materials, and be sure that the windows will not let go in the cold.

Warming of plastic windows

Plastic windows, despite the certification of manufacturers in reliability, also need insulation. Therefore, we consider several common ways.

The cheapest version is the junction of the window with a dense, holding heat to the material. Previously, blankets were used for this, but it is only suitable for wooden windows. For double-glazed windows, there is a more modern means - a plastic colorless film that is attached to the window. This method is very simple and does not require a mandatory dismantling.
Some prefer to warm the window with the help of blinds. At the same time, the window frame itself is not affected, and the stones of wool tissue are pasted on the blinds.
More expensive method - installation of the glass of electrical heating of the glass. Now there are many different electrical heaters for windows that are installed on the windowsill, or spirals of incandescent attached by glue directly to the glass.
The most reliable method is the installation of a metal-plastic glass package, which is not less than three stalks. At least one of these braids will be energy saving. The use of such special windows significantly increase the heat-saving characteristics of plastic windows. The double-glazed glass must be equipped with elements of thermal separation with metal inserts; The space between the glands is usually filled with argon or crypton. This window will cost weekly, but the house will be reliably protected from cold and drafts.

Warming of slopes of windows: selection of materials

After you change your old wooden windows to new plastic, you expect to protect against noise, dust and cold. The first time of the PVC profile window justifies itself, but then they begin to skip the cold and moisture. This can happen due to the drawdown of the walls of the house and depressurize the seams. Of course, this situation does not add comfort, so you will need to carry out the windows of windows inside and outside.

This method will help create an additional protective and thermal insulation layer. To do this, you will need such materials:

Polystyrene foam extruded;
Styrofoam;
Fiberglass (escape);
Mineral wool;
Sandwich panels.

These materials are available in plates. Which one to choose to insulate your windows, decide depending on the size of the gaps. For example, if the gap is at least 40 mm, the foam foam, fastener and fiberglass and fiberglass with a thickness of 2-3 cm are good. If the clearance is narrow, then use mineral wool or mounting foam.

The insulation of slopes is not difficult task, and if you have at least some skills in construction work, you can easily handle it yourself. Only arm with some recommendations.

Putting the insulation, check the good density of its pressed to the surface. For more efficient insulation, do not only process the window block, but also any mounting seams, filling them with the mounting foam or mineral wool.

Those slump windows that are not equipped with insulation, treat special vaporizolation to eliminate moisture penetration. To do this, use a tape seal from sealing mastic or polyvinyl chloride sealing films. Insulated material should be isolated from moisture.

Warming windows in Swedish technology

This method is gaining more and more popularity. Its title is obliged to use the material of Swedish production (tubular seal from silicone rubber). Manufacturers argue that such material is durable (up to 20 years), does not lose its operational qualities with a wide range of temperatures and is not afraid of the effects of dirt and paints.

It is very difficult to insulate the windows on the Swedish technology yourself. Professional skills and special tools will be needed here. It is rather difficult to make a sample of a milling cutter around the perimeter so as to get a groove to roll the seal, namely it is necessary that the material does not dug out over time and did not fall.

It is better to order this work to professionals. It will cost it relatively inexpensively, and the price includes such work as dismantling windows sash, preparation of the groove under the seal, the location in it is a tubular silicone seal, fitting the sash, if necessary, sealing brakes and a turn between the sash.

Evaluation of work with elements of fittings is carried out separately, both repairs and a complete replacement. The window repair window is also paid separately. The price of window staining is also indicated separately.

If you calculate the entire amount that you have to pay for the complex of work, it is not difficult to see that it is no less than the cost of the standard plastic window, taking into account the entire design and its installation. Therefore, you should make a choice - to warm the wooden window or install plastic.

The main thing is that you need to remember when using the Swedish technology - the windows frame must be integer, without traces of rotting. The replacement of such elements will cost Nedlyo.

Now your dwelling is completely isolated from the cold and exposure to moisture. All winter will be surrounded by comfort, and you can significantly save on energy - gas or electric heating, and even firewood and coal, if you have oven heating. We look forward to your comments in which you can ask questions that have arisen or set out your suggestions. Good luck in your works!

Warming with tape for windows

http://www.youtube.com/watch?v\u003dweo99xbfqum Video CAN "T BE LOODED: How to insulate the windows - the correct stack of windows ✔ Look and learn! (Https://www.youtube.com/watch?v\u003dWeo99XBFQU)

The easiest way is the greasy scotch. But, as a rule, such materials are understood in September-October. And the Special Scotch has no successful for saving the windows in the season just not to find. In such cases, you can use the usual wide scotch. For insulation, you will also need a hairdryer and wool. The hairdryer is needed in case of icing - to dry the land. If you carefully do not dry the place of sticking with scotch, then it will immediately dare. It is better to buy cotton in a pharmacy (you need to take non-sterile). From it, roll the harnesses, which thoroughly close the gaps. If the slots are narrow, then you can do without cotton. From above on the dried window, we glue the tape. This method of pasting is the most economical and relatively fast. But he has its drawbacks: Scotch can fall off and have to be bold.

Warming windows with the help of foam rubber

The most reliable and durable way is the rubberized seal. The cost of such insulation will be much higher, but also in quality it will be higher. The rubber seal is three species that differ in thickness. For plastic windows, the "E" class sealant is suitable. Its thickness is 2-3.5 mm. One pack of the seal "E" (10-12 m) should be enough for 4 windows. The category "D" category (3-8 mm) is designed for wider gaps, and it is better to use it for wooden windows. The R "class seal has a width of 3 to 5.5 mm suitable for plastic and wooden. The advantages are obvious: too much time will not need to fulfill work, this material is durable and does not absorb moisture.
To heat the rubberized insulation, the surface should be thoroughly washed and dried. Otherwise, the adhesive base of the seal will slip, and its grip will be unreliable.

Warming with glue for plastic windows

When working with glue, the following precautions must be observed:

while working with glue, fresh air is needed;
it is prohibited nearby smoking and the use of open fire;
it is forbidden to drain the remnants of glue into the sewer;
do not allow glue into the eyes.

Thus, there are many ways to insulate the windows. But any insulation that you choose should perform your function - take care of the warmth of your home.

https://www.youtube.com/watch?v\u003dq7yvx3mc-O4 Video CAN "T BE LOODED: Plastic windows. Fast junction and seams (https://www.youtube.com/watch?v\u003dq7yvx3mc-O4)

Heat in a house or apartment is a pledge of comfort, comfort and well-being. To do this, we spend central heating in our apartments, we build warm floors and so on. However, it is very important not only to deliver to the house, but also to save.

Most of all the heat leaves our apartments through the windows, insulation that can be noticeably improved the conditions of their stay during the cold season.

Let's look at rapid ways of insulation, both modern plastic windows and old wooden. Let's start with the easiest and cheapest ...

1. Do you want to insulate the window? - I am aware of it!

The warmly leaves our apartments not only because of drafts, but also to leave in the form of infrared radiation.

The usual glass, being transparent to the emission of the visible spectrum, has a low level of transparency for infrared rays transmitting heat.

But the contaminated glass, losing transparency in the visible part of the spectrum, significantly increases it in the infrared spectrum. Therefore, to preserve heat, it is enough to simply wash the window before starting the cold season.

However, in the spring it does not hurt it either - so that less radiant heat penetrates the apartment and without that hot summer.

Wash the window inside and (required!) Outside, a means based on ethyl or ammonia alcohol. This will allow, firstly, to clear fat pollution, which is particularly relevant for the kitchen, and, secondly, to avoid divorces that are left dissolved with salt, remaining after evaporation of moisture.

In addition to the glass, we need to wash the frames - on them we will glue seals, insulation, and so on. The dirt glues badly, and falls off quickly. You do not want to cross the sealer in the middle of the winter with the lash windows open?

2. Traditional ways of wind insulation

An effective way to reduce heat loss is the installation of a heat shrinking energy-saving film on the inner side of the frame, parallel to the glass or glass.

This film has a double action. First, prevents the outlet of the heat in the form of infrared radiation. Secondly, it creates an additional thermal insulating layer of air with each other and glass. This usually allows you to get rid of the "crying windows" effect.

Install the thermal film is simple enough. On the frame, pre-sulfted it and degreased, around the glass glue bilateral tape. Film is usually sold folded in two layers. We divide the layers between themselves and cut the glass to the size of the glass, plus two or three centimeters from each edge.

On the tape glue the film so that its surface overlap all the glass. We try to pull the film, but we do not pay attention to wrinkles. It is more important to ensure that the entire edge of the film is tightly "sat down" on the tape without "bubbles" we send hot air from the household hair dryer. Thanks to its heat shrink properties, the film itself will stretch and smoothed.

View by the window with such a film, of course, not so hot, for that heat and dry.

New windows do not warm. Why?

Similarly, the sealant is changing on the frame, after which the sash is set in place.

Procedure for installing the sash reverse order when removing:

The sash on top of the bottom is satiated on the bottom loop, then the movement of the top loop is connected from itself, the stud, the lock washer and the pad of the loop are installed. We close the sash to the castle and check the quality of the work done by testing the joint on the draft.

In order for the seal on the plastic window, it was necessary to change every two or three years, this item requires proper care. It is required to clean and lubricate the sealer at least once a year, but it is better twice, before the start of the cold season and on its completion.

We wipe the seal on the leaf and frame with a dry rod for cleansing from the accumulated "REL \u003d" Lightbox "href \u003d" / images / stories / kvartira / 7-sposobov-uteplit-okna-na-zimu_8.jpg "\u003e mud. Then we wipe the seal with soap solution for better cleaning and degreasing and wipe it dry. We appline silicone lubricant on a cloth (it can be purchased in any auto shop) and rub into the seal. This simple procedure will save the seal from drying out in the heat and "crying" in the frost, allowing him to save his qualities for a long time.

6. War down slopes and window sills

For some reason, some forget that the window is not only glass, frame and sash, but also slopes and window sills. What is the sense, from the best window, if from under the windowsill in the whole "siphonite"? Of course, it is better if together with the windows replacement, you also replaced the slopes and window sills to modern designs from PVC, however, it is precisely when they are installed, the installers often "hallowatt", knowing that the customer focuses on the frame.

Inspect the location of the slopes to concrete. In the case of the detection of large gaps, score them with palauls, or a foam and melting over the alabaster, or fill in the mounting foam, which it will be necessary to fill with the skin after drying. Complete the sealing of the gaps with a building sealant.

If the primary examination did not reveal anything, draw a more thorough test using a burning match or a wet finger. In the case of the detection of "Cold Bridges" you need to "obstruct" a layer of cladding. The sound is deaf compared to neighboring sections indicate the presence of emptiness under the layer. In this case, we remove the facing and close the crack in the manner above. To do this, however, "rel \u003d" lightbox "href \u003d" / images / stories / kvartira / 7-sposobov-uteplit-okna-na-zimu_9.jpg "\u003e , It follows in the warm season, because the mounting foam and finishing construction will work badly in the cold.

You can make the slopes from low-cost pipes, for example, from foam, saving at the same time on the slopes from PVC and Installer Services. To do this, you will need foam panels with a thickness of at least three centimeters, adhesive for foam (for example, "cerezite") and cement mortar.

This work is true, not from the easiest, fast and clean. It is worth thinking twice, and will not be better to invite a professional. But if you decide, you will be briefly waiting for you:

The sidewalls of the window opening and part of the adjacent wall should be opened to the base - brick or concrete. It is done to drown a layer of insulation into the wall. Here you can wait for the mass of surprises, in the form of the builders vented by the builders, the rackens of the packley and other "insulation". The holes at the same time will be impressive. A fair piece of the fitting wall of the adjacent wall can even fall off, so get ready for stucked operations of the appropriate scale. To ensure a reliable clutch of the future slope with the base, you can fix the reign network with a dowel (plastic - so as not to carry out cold).

Bending cement mortar, we apply a layer of plaster on the window opening and on the wall, on the width of the future slope (about 20 cm) from the opening. You can add clay into the solution. This will give it an additional viscosity, and plastering the vertical surface of the walls will be easier. We achieve a flat surface and give stucco to dry well.

However, if you are confident in the reliability of the existing layer of plaster, you can simply thoroughly dismiss the wallpaper, paint or other decorative wall covering, process to and align the surface of the surface.

"REL \u003d" Lightbox "href \u003d" / images / stories / kvartira / 7-sposobov-uteplit-okna-na-zimu_10.jpg "\u003e Further, on foam panels with a toothed spatula, we apply glue and press the panel to the surface, holdting 10-20 seconds to the "setting" of glue. First glue foam to the vertical part of the wall and slopes. The seams between the panels are carefully embarrassed by the same glue. Similarly, set the panel on the horizontal part of the slope in the window opening.

Alternatively, you can use the mounting foam. It fills the voids well in the slopes, holds firmly for the base, and the insulation itself can be reliably "glued". Here, only, it costs it is expensive, but it takes it a lot (a large balloon on a two-cecored window may not be enough).

Close the foam can be plasterboard or thin plastic panels, putting them again on glue.

I repeat, the surface is complex, many corners. Professionals use other insulation and establish special facing panels. But if you need to save, or I want to do everything yourself - you can try to try.

7. Warming window for Swedish technology

If the installation of a modern window from the PVC profile does not afford to you, either not suitable for any other reasons, insulate the usual wooden window can be used by the newcomer Swedish technology. Such a sonorous name received windows insulation technology with the help of a groove seal euro-strip, swedish production, although analogs of Eastern European countries appeared on the market.

The technology requires the use of a rather specific tool, which is not found at each home master, and the experience of handling it is needed. So behind this service it is better to contact the K7 ways to insulate windows for the winter: photo 11 "REL \u003d" Lightbox "HREF \u003d" / images / STORIES / KVARIRA / 7-SPOSOBOV-UTEPLIT-OKNA-NA-ZIMU_11.JPG "\u003e specialists. But all the work is performed quickly, so the method is quite suitable if the winter "suddenly burst unnoticed."

To install the seal, the window sash must be removed. At the place of fitting the sash to the frame, the cutter is done by a groove, where a special roller and a tubular profile is stacked, which takes the form of the groove. Additionally, the compound is condensed with silicone sealant. If you wish, insulation with a Swedish profile can be performed inside a double frame. Similarly, a balcony door is insulated.

7 ways to insulate windows for the winter: photo 12 "REL \u003d" Lightbox "href \u003d" / images / stories / kvartira / 7-sposobov-uteplit-okna-na-zimu_12.jpg "\u003e Swedish technology also includes fitting of sash, frames and balcony doors, but it is necessary to do this in any case, regardless of the installation of Swedish seals.

The effectiveness of such insulation is a little better than traditional stuffing, but allows you to unhindered to open windows and subcords during the winter for ventilation.

We looked at the most common ways of insulation of windows that do not require serious repairs. I hope our tips will help add to your life a little heat.