Using a smartphone or tablet, you can easily set up the Internet for your other devices.
This is possible using the "Modem Mode" function, which makes a smartphone a full-fledged Internet signal router.
If you need to connect to the global network from a computer and have a smartphone with mobile Internet at hand, you only need 1 minute to set up sharing.
Also, several different gadgets can be connected to one access point at once.
Content:
Android smartphone
All versions of the Android OS have the function to turn on the hotspot.
Signal distribution requirements:
- Mobile Internet. For normal operation with several connected devices at once, it is recommended to use a 3G or 4G connection;
- Enough traffic. If your tariff has limitations, before creating an access point, we recommend checking the number of remaining megabytes;
- The function should work on the second device.
Internet distribution via Wi-Fi
To access the Internet from the second gadget, it is necessary to enable data transfer over the mobile network on the first device.
Without this, you will connect to the access point, but the sites will not load.
Note! Depending on your version of Android, the names of the menu items may change, but the setup principle remains the same as in the instructions.
Follow these steps:
- Go to the window Settings -Mobile networks;
- Activate data transfer over a cellular network;
- Next, go to Settings again and open the section "Wi-Fi Hotspot";
- In the new window, enter Network name, Type of protection and come up with Access password. Select as many users as possible and save the settings.
- Network name – enter any name by which it will be easier for you to recognize the access point. Enter text in Latin letters.
- Type of protection – this setting is responsible for the level of data encryption over the wireless network. It is recommended to select the WPA/PSK2 option, as it keeps data confidential and does not slow down the Internet connection.
- Password – at least 8 characters. You need to use upper and lower case letters as well. Numbers, special characters. This way you protect the access point from hacking. If you don't specify a password, anyone can connect to the network.
Modem Mode
The second option, how to distribute the Internet from an Android smartphone, is to use a mobile gadget as a.
This method is suitable if you need to access the Internet from a computer, but it does not support connecting to Wi-Fi networks.
Follow instructions:
- Connect the phone to the computer with a USB cable and wait until the computer recognizes the device;
- Next, the system will automatically install the necessary drivers. If you are using or an older version of the OS, the drivers will have to be installed manually using Device Manager;
- Then on your smartphone, go to Settings. Open section "Network connections";
- Go to the "Other networks" tab, and then click on "Modem and hotspot";
- Check the USB modem box;
- After activating the function on the smartphone, the computer will automatically recognize the new. Go to Windows Network Connections. Right-click on the LAN connection icon and select the "Enable" field.
Your computer will now have an internet connection.
However, it will only work if you have enabled mobile data and have enough internet data.
iPhone and iPad owners
Officially, on the iPhone, you cannot distribute the Internet in hotspot mode. such a function is present, then disappears again.
Even if there is no access point in the settings of your smartphone, you can still distribute the Internet using a simple life hack.
First, make sure you have a 3G or 4G connection.
Then follow these steps:
- Open Settings and go to the "Cellular" window;
- Find an item "Cellular Data" and open it;
- Next, at the very bottom of the window, open the tab "Modem mode". In the window that opens, the field "APN" will appear. You will see several text fields in which you need to enter the value "" (without quotes);
- Now the section "Modem Mode" is guaranteed to appear in the main menu. Open it, come up with a network name, and a password.
On the second device, turn on the Wi-Fi network you just created. Check your internet.
If there is no connection, make sure you have activated your data plan or Contact the operator.
Instructions for Windows Phone
Although Windows Phone has many differences from and, the option to quickly distribute the Internet in this operating system is as simple as in previous versions.
Follow instructions:
- Open Settings and go to window "Wireless networks";
- Next go to "Additionally" and select the field "Modem mode", after activating the mobile network;
- Select the type of network distribution "Wi-Fi router", USB modem or . The fastest and most convenient option is Wi-Fi. It does not require wireless connections and provides faster web page loading speeds;
- Click on the desired field and come up with Network name, its Password. In the "Users" window, you can control how many devices are currently connected to the network and you can block unwanted users.
Settings
Users have access to advanced network distribution settingsWi- fi:
- Bandwidth setting. You can independently determine the maximum allowable level of connection speed. To do this, click on the field "Bandwidth" and set a limit. In the future, you can view connection usage statistics;
- WPS setup– How to connect to your network. This can be a PIN code or a push button. If there is a special one on the second gadget, just activate the hotspot on your Windows Phone and press this key on the other gadget. The connection will be established automatically without entering passwords;
- Energy saving. This add-in window allows you to configure the operation of the access point when no client devices are connected to it. Automatic shutdown will save battery. You can configure the deactivation of Internet distribution after 5, 10 or 15 minutes of inactivity. Also, you can prohibit turning off the connection, but this will increase battery consumption by an average of 20% -30%.
Please note that you can set a traffic limit.
This option will be useful for those who have very limited cellular operator service packages.
The limit will not allow you to exceed the amount of traffic you specified and will keep other users able to go online:
- Go to the settings window and go to the section "Applications";
- Click on "Data control";
- Select Set Limit. Then specify the period for which the restriction will work (day, week, or month), as well as the allowed number of megabytes.
Don't disable background transfer. This may cause errors when connecting to the access point.
The connection speed on client devices may drop slightly, but this is due to additional filtering of content that consumes a lot of traffic.
Fig.13 - connection limit setting
Viewing browser pages and editing documents is more convenient from a laptop than from a smartphone or tablet. Use your Android gadget as a wireless modem to set up and distribute Wi-Fi using a hotspot.
What is a Wi-Fi hotspot
Wi-Fi hotspot - a station that provides access to multiple devices to a wireless network. A gadget with the Android operating system can act as an access point. Device requirements:
If your smartphone or tablet does not support GSM / 3G, but works with OTG technology, that is, it detects connected flash drives, you can connect a USB modem to it and use it as a wireless access point.
The modem interacts with the tablet via a cable using OTG technology
When turning on the access point, remember: distributing Wi-fi, you consume mobile traffic. If the tariff is not unlimited, track the state of the balance after working on the Internet. Also, an active hotspot increases battery consumption.
How to distribute the Internet from a phone, smartphone or tablet
There are two ways to distribute Wi-fi from a smartphone or tablet - using standard Android tools or using a third-party application. Please note - you can only distribute mobile traffic from the connectionGSM/3G. Unable to set up an access point usingWi-fi network connection.
Setting up an Android device as a router
The Android system, starting from version 2.3.x, allows you to broadcast Wi-fi to other devices. To set up an access point, make sure that the mobile Internet is turned on and go to the gadget menu. Setting example LG G3, Android version 5.0:
You can enable mobile Internet (data transfer) using the menu item "Settings - Wireless networks - Mobile data".
On Android earlier versions, to set up an access point:
After activating the connection, you will see the corresponding icon in the notification bar at the top of the screen.
It is enough to set up an access point once, for subsequent connections it will be enough to activate the function in the network settings or by pulling out the notification curtain at the top of the screen and clicking on the "Access Point" button.
Photo gallery: setting up an access point in the Android menu
Step 1. Open Settings Step 2: Select "Tethering & Network Sharing" Step 3. Select "Access Point..." menu Step 4. Create Wi-Fi Hotspot Step 5. Configure Access Point Settings Step 6. Enable Hotspot When reconnecting no need to configure hotspot
Application usage
Use applications for sharing Wi-Fi access if your smartphone or tablet does not support the standard settings. Notable programs: Osmino, mHotspot, MyPublicWiFi.
Setting up a Wi-fi connection using the Osmino program as an example:
The smartphone or tablet will switch to modem mode. To disable the hotspot, go to the application and click "Stop Sharing".
Photo gallery: how to enable Wi-Fi sharing in the Osmino app
Step 1. Download the application Step 2. Specify the network settings and turn on the distribution Appears when you start the program for the first time
Why the Internet does not turn on and does not work through an access point
By connecting the mobile Internet and activating the access point, the user may encounter difficulties. There are three reasons why a Wi-fi hotspot does not work correctly.
An antivirus that protects your smartphone in real time can block network connections. Go to the application, turn off the firewall and activate the access point. If there is no connection, uninstall your antivirus program and try again.
Installed applications make changes to the operation of the operating system. Check your smartphone with an antivirus and block malicious files. Use the Application Manager to find out which program has the rights to control network connections and uninstall it. Then turn on the hotspot.
If the previous methods don't work, reset your gadget to factory settings. For this:
By performing a factory reset, you will lose all data stored in the device memory. Create a backup beforehand.
A mobile operator can block the distribution of traffic over Wi-Fi. If you set up an access point on Android according to the instructions and eliminated the errors described above, contact the contact center with a request to check the network settings and blocking.
How to distribute the Internet from the phone if friends really ask?
If you need the Internet on several devices at once, but there is only one, you need to know how this is done.
How does Internet sharing work on a smartphone?
Absolutely all users can use their smartphone as a remote access point to the Internet.
The main condition for distribution is the presence of a 2G, 3G or 4G Internet connection on the smartphone.
This traffic will cost the same as your regular mobile Internet - according to the tariffs of your mobile operator.
A smartphone that distributes the Internet can broadcast a signal to several devices at the same time. Restrictions on the number of calls to the access point depend on many factors, including the factory settings of an individual device.
The more devices connected to one access point, the slower the network connection speed will be.
Instruction for Android
If you are an Android smartphone or tablet user, you can distribute the Internet as follows:
- in the window that opens, find the wireless networks tab and open the full list of options by clicking on the "More" item;
- go to the device menu and then turn on the settings panel (Fig. 1);
- now click on the item "Access Point" and "Settings" (Fig. 2);
- in a new window, you need to configure the connection parameters. First, enter a network name - this name will be seen by other devices when they try to connect to your device. Select the level of protection - it determines the degree of security and complexity of encrypting the password of the access point. The network can be left open - all users will be able to connect to the access point (if possible, do not use an open network, this may not be safe for your device). Next, you need to come up with a password to access the connection (Fig. 3).
Instructions for iOS
If you are an iPhone or iPad user, follow the instructions:
- go to the device settings;
- select the cellular connection settings window (Fig. 6);
- set the "Modem mode" parameter to the "Enabled" state (Fig. 6);
- now scroll down the settings page until the modem settings section appears (Fig. 7);
- in the APN field, enter your operator, his name and access password (for example, for the MTS network, all three parameters will have the value "mts"). You can find out the data from your operator;
- after entering these data, a new modem mode item will appear in the settings window (Fig. 8). Open it.
Rice. 8 - enable Internet distribution
You can now connect to the device from your PC or other smartphone.
WiFi wireless technology has become very dense in people's lives and has taken its niche. This allows users to group computers and other devices to share data, play games together, and just go online. As a rule, a router is needed to organize such a network. But what to do if it is not at hand. You shouldn't get upset. You can share WiFi from Android.
Nowadays, everyone has a smartphone or tablet with this operating system. One of the many features of such devices is a portable hotspot. In other words, you can distribute Wi-Fi. Moreover, if you connect your phone to the mobile Internet (2G or 3G), then all devices connected to this distribution will have access to the global web.
How to share Wi-Fi from Android: Video
How to enable portable hotspot on android
For starters, it's worth noting that phones and tablets work with the older wireless standard, 802.11g. While laptops, TVs, desktop computers and so on work with the 802.11n standard.
However, the newer standard supports older versions. Therefore, almost any device can connect to a group created using Android.
The difference between these technologies lies in the data transfer speed. But for a local network, even the 802.11g standard will be enough. So, how to distribute WiFi from Android? Everything is extremely simple. Moreover, absolutely all versions of this operating system up to 2.3.3 support this function.
First you need to enter the connection settings. To do this, open the menu and find the settings shortcut. It usually looks like a gear. Click on it.
Now we are in the system settings. Here we are interested in the item "Other networks". On some versions of Android, the item is called "More ...". If you are using an old smartphone or tablet, then you must first enter the "Wireless Networks".
Further on all devices is the same. Go to the "Tethering and hotspot" section. It remains only to check the box "Mobile AP" or "Portable access point". After that, the Wi-Fi adapter will switch to the WiFi distribution mode. This completes the organization of distribution. You don't have to configure anything.
Internet distribution via WiFi from Android
So, now we know how to use an Android mobile device as a hotspot. However, you can distribute mobile Internet. To do this, mobile data must be enabled before activating the Mobile AP. It is done simply. Swipe from the top of the screen to the bottom. In the menu that appears on the toolbar, find the button that activates the transfer of mobile data. As a rule, it is indicated by two arrows pointing in opposite directions.
After clicking on this button, you will allow data transfer over 2G and 3G connections. Now, it remains just to activate the access point. You already know how to do this. As a result, the created distribution will have access to the global network. Now you know how to distribute the Internet via WiFi from an Android phone. There is nothing difficult in this and you should not have any difficulties.
It is worth noting that everything is not always simple. For example, in order for the phone to connect to the Internet via 2G and 3G connections, it must be configured. Usually, these settings come automatically. If this does not happen, then contact the customer support service at a toll-free number. It should also be understood that in this mode, the battery of the smartphone will be discharged much faster. Therefore, take this into account, especially if you use such functions on the road, where there is not always a power supply.
Setting up a Wi-Fi hotspot on Android: Video
Android phones have a great ability to switch to modem mode and become a source of Internet for other electronic devices. But you need to be able to do it.
How to start distributing the Internet through the phone?
First you need to set up the Internet on the phone itself, which we will later use as an Internet donor for other devices. The necessary settings must be provided by your mobile operator.
To give your Internet-enabled phone the right to share this feature with other devices, you need to go to the "settings" menu and activate "tethering mode".
You also have to go through the "configuring the access point" stage. Here you will need to specify the network name, security type and password. Protection can be left the one that was specified by default. The password must be 8 characters long. It is better that it includes numbers, letters and signs. After that, you will be offered 3 options to distribute the Internet.
Internet sharing via USB connection
Most likely, the necessary drivers are already in the phone itself or on the disk that you had to purchase with the device. If the drivers are on the phone, then through the settings you need to select the phone connection mode as a USB device.
After that, you can install the drivers on your computer. When the installation is completed, turn off the USB mode and return to the USB tethering mode again.
Internet distribution via Wi-Fi
In this way, the Internet can be provided to both a computer and a phone. But this requires that the receiving device be able to receive a Wi-Fi signal using a special receiver.
At this stage, a small incident may occur. The fact is that Android developers have specified the standard name of the AndroidAP access point and the standard password 00000000. Not all subscribers change these parameters to their own. Because of this, you can periodically connect to someone else's access point.
Internet sharing via Bluetooth
This data transfer option can work with more modest arrays of information and at a shorter distance than Wi-Fi. The Internet that such a phone can distribute comes from its mobile operator.
In this way, the Internet is transferred only to the telephone, also equipped with Bluetooth. To do this, on the receiving device, you must activate the item in the settings called "Internet access".
Distribution of the Internet from the phone can be carried out in different ways. It all depends on the capabilities of the electronic devices that are the source and receiver of Internet communications.
