All the secrets of installing a screen on an acrylic bath. Features of mounting on rectangular corner models. How to install a screen under a bath - tips, tricks, installation options How to fix a screen to a bathroom

In many cases, an ordinary bathroom after renovation looks sloppy and not very beautiful without any decoration. There are so many options with which you can hide the space under the bathroom, but to find the best way, you should start from the existing conditions. Therefore, in order to figure out how to install a screen under the bath, you need to select the type of screen, agree on the amount you expect and determine what other functionality from the structure you need, in addition to the aesthetic appearance.

Factors affecting the choice of a screen for a bath

In many cases, to hide the space under the bathroom, a simple brickwork is used, after which tiles are laid on it, exactly the same as the bathroom is decorated. Also, mirrors are often used to clad this section of the bathroom, with the help of which the room visually increases in size, especially in cases where the room is tiny.

If such an installation of the screen under the bath is used, then it will be used only for decorative purposes, it will not work to make free space in the form of a small pantry.

Important! You also need to consider the place for installing the revision hatch, which provides access to the drain siphon and directly to the pipes leading to the bath.

But in certain cases, the specificity of the bathroom in a particular apartment limits the choice of the desired type.

What are the options for the design of screens

More often, non-monolithic screens are installed with the ability to store the necessary things under it, in which there are holes for easy access to communications. Such screens differ from each other in several types:

• sliding screens for a bath with and without shelves;
• stationary screens;
• removable panels on legs or spacers.

When choosing a design, you need to take into account some points, such as: parameters of the bath, the square of the bathroom. And only after that you can understand which screen will be the best option, and whether you can make it yourself or you will have to buy a ready-made one.

It should be noted that installing a screen on a bathtub with a simple design is much easier than one with doors, but in the first case, you will not be able to use the space under the bathtub and use the free space to save all kinds of items.

Tip: Even if you don't need storage space, installing a screen under a bathtub with sliding canvases will be much more practical, for example, in the event of a sudden repair of pipes, especially when compared to brickwork.

One of the practical and fashionable ways is to decorate the bath screen with ceramic tiles, but later difficulties may arise, how to remove the screen from the bath, this moment will need to be thought out in advance.

What material should you use?

During the production of a screen for a bath, there are certain requirements that you need to pay attention to when choosing a construction material. If you have not yet decided on the material, then you need to know that it must have certain properties, such as:

• have good strength;
• be sufficiently tough and moisture resistant.

Based on this, the screens for the bath can be made of plastic, moisture-resistant MDF, drywall or metal painted with a special paint.

You need to know that if you choose a material such as drywall or brick for making a screen, then you still have to carry out finishing work, but, despite this, such a finish provides a wide range in the choice of design. But the installation of a plastic screen under the bath, as well as metal or MDF panels, will cost much less, because they do not need additional finishing.

Before installing a bath screen, you need to understand that a lot depends on the shape and type of product. For example, for acrylic bathtubs, the choice of screen designs is much wider than for cast iron; it is not difficult to choose a screen for a standard rectangular font, and for a bath of complex shape, most likely, you will have to make or order individually.

Screen installation sequence

So how to mount a screen under a bathtub with different functionality? Regardless of which type of screen you choose for the bath, the process of making and installing it will almost always be similar and it consists of the following actions:

• Installing a screen under the bathroom at the initial stage implies measurements and marking;
• At the next stage, installing the screen on an acrylic bathtub or its cast-iron counterpart involves creating a frame of the structure. Metal profiles are the best option, but wooden beams can also be used. Only before assembling the frame, the wood needs careful processing with protective compounds;
• For reliable fixation, the guides for the screen under the bathtub are twisted with self-tapping screws or with the help of special corners, if it is a wooden structure.

Important! Before placing the screen under the bath, the finishing material is adjusted to the size of the frame.

• Installation of the screen under the corner bath does not require the installation of side walls. Otherwise, it is the side sections that are first mounted, and then the front face. Sometimes the best option is to mount the screen under an acrylic bathtub or cast-iron bathtub with complete closure of the space from one wall to another along the perimeter of the plumbing fixture. In such cases, the free space near the bathtub is used as a shelf. This point needs to be thought out at the beginning of the installation in order to create an appropriate frame.
• After all the parts are mounted, the screen is decorated. The fittings are attached to the doors, the facing material is placed, etc.

Installing sliding doors

The question of how to fix a screen under a bathtub with sliding doors is a little more difficult, because such a design implies the installation of more complex elements.

First of all, the installation of a screen on a corner bath with sliding doors requires the use of an W-shaped profile, into which the screen canvases will be laid and freely move along them. During installation, the sliding panels should be installed with a slight overlap. If the screen is attached to the acrylic bathtub correctly, there should be no gaps between the panels, but at the same time ease of movement on the slide is ensured.

A prerequisite for such designs are handles for moving panels.

Important! If there are small children in the house, you should consider locking the doors. This is especially true when household chemicals and other harmful substances are stored under the bathroom.

If the size of the room allows the use of swing doors, then before placing the screen under the bathtub, you need to build special racks in the frame that will match the size of the doors. Hinges will be attached to these posts. You can also install a furniture lock to prevent spontaneous opening.

Conclusion

Installing a screen under an acrylic bathtub or another is quite simple, the main thing is to adhere to the sequence described above and do not forget the proverb "measure seven times and cut once." But if you find it difficult to make or install a purchased screen on your own, or, perhaps, you do not have the right tool, you can always turn to professionals for help.

If installing an MDF screen under the bath is not difficult, but you still have questions about how to close the bath with a screen or which material is better, then you can always watch a detailed video instruction.

To fully complete the bathroom renovation and get a flawless design, you will need to mount a bath screen.

After installing the bath, its appearance is not entirely aesthetic due to the type of sewer and water pipes, as well as fastenings to the floor.

The screen will not only hide all communications and decorate the room, but will also be useful from the practical point of view, as it will allow you to store detergents, brushes and other bathroom accessories behind it.

Installation is quite simple and does not require the use of special tools or experience in construction.

Types of screen designs

To properly organize the space under the bathroom, get convenient access to communications and provide the necessary functionality, you need to choose the right screen design.

Access doors are:

• hatch type;
• sliding type;
• folding type;
• swing type.

TO the advantages of a stationary screen relate:

• high strength material, which makes it easy to finish them and even mount tiles on them;
• security additional support for the bath;
• long service life due to resistance to high humidity and mechanical stress.

The disadvantages are as follows:

• impossibility of dismantling without destroying the finish and supporting frame;
• waste of space under the bathroom due to the thickness of the walls;
• heavy construction weight.

It is also worth paying attention to the fact that the installation of such a screen is impossible under an acrylic bath.

Sliding

It consists of two or more sliding doors installed on special rails and usually made of lightweight materials, for example, plastic panels or waterproof MDF.

As well as stationary, they provide full or partial access to the space under the bathroom. However, at the same time, they take up a minimum of space, can be easily dismantled and replaced with others of suitable size.

Many manufacturers additionally equip them with convenient plastic shelves for storing bathroom items.

The total construction cost is minimal compared to others.

But with all the advantages, sliding screens are very unreliable and can easily move from their place even with minor blows or presses. Therefore, they often have to be put in place on their own.

Removable

This model is designed for installation on an acrylic bathtub, its body is made of plastic. Such material has increased decorative properties, but at the same time its practicality and functionality leaves much to be desired.

This is due to the peculiarities of the mountings and the complexity of access to communications located under the bathroom.

Such screens are not suitable for storing bathroom accessories that need to be quickly accessed. However, they can be successfully used as storage for unnecessary items.

Maintenance of communications also becomes difficult and in some cases, in the absence of problems, the owners do not carry out their timely inspection, which ultimately leads to disastrous consequences.

If you look at the cost of a removable screen, then it is overstated several times compared to other designs.

Therefore, it is advisable to purchase them to create a unique design or if it is impossible to install the first two types of screens.

What material should the screen be made of?

In order for the screen in the bathroom to last longer, when choosing it, you must first of all pay attention to the material from which it is made.

Bath screen, due to special operating conditions, must meet the following criteria and requirements:

1. Increased moisture protection... The presence of a protective coating or the moisture resistance of the material itself allows you to extend the life of the screen without deteriorating the mechanical properties or fading of the decorative finish.
2. Sufficient material strength... The rigidity of the doors and the frame itself will provide increased safety and durability.
3. Resistance to high temperatures, which can have a detrimental effect on the condition of the finishing layer. This is especially true for those who like taking hot baths for a long time.

The main material is usually chosen:

• plastic;
• waterproof plasterboard;
• OSB or MDF;
• acrylic;
• brick;
• thin sheet galvanized or polymer coated metal.

Tiles are usually laid on stationary brick or plasterboard screens.

Preparatory work

Before installing the screen under the bath, preparatory work must be done. They consist in preparing a place for installation, taking measurements and marking.

If possible, free up the space near the bathtub so that it is convenient to place the screen parts and carry out installation work.

If repairs were carried out earlier, then an oilcloth should be laid on the floor so that construction debris does not get onto the decorative finish. The width of the oilcloth should be at least 0.5 m, and the length should correspond to the longitudinal dimension of the bath.

Using a tape measure, measure the required distances according to the selected screen design along the walls and floors.

Then mark the installation locations with a marker with the correction of the position relative to the sides of the bath.

In this case, it is necessary to take into account the thickness of the doors so that the doors are located directly under the bathroom: under the cast-iron bath, the stationary screen can be installed flush or slightly protrude beyond the side, and under the acrylic one - it can only be flush with the sides due to the low strength of the material.

Diagram of a bathroom with a screen

Installation of a stationary screen

Installation instructions for a stationary brick screen provides for the following types of work:

1. Align the rough surface of the floor according to the markings by applying a cement-sand mortar of the M200 brand. To do this, knead the mortar and apply it with a spatula on a clean, dry surface, previously treated with a deep penetration primer, in minimal quantities. Align it correctly and check the horizontal level with a level.
2. After the base has dried, it is required to install and firmly fix a flat bar, which should be located strictly along the markings. It will be a marker for getting an even laying of the first row.
3. Perform brickwork with bandaging the rows. The laying technology is similar to the method of building a wall for a house. The first row is laid out with the obligatory control of the position of the bricks, since any distortions will be visible and it is quite difficult to eliminate them later. Check every third row with a plumb line in order to form a vertical plane.
4. When forming an opening for access to communications, pay special attention to the evenness of the end part of the brick, since it will be necessary to install a door in it and observe the minimum gaps between the materials. When laying the last row, it may turn out that a whole brick will not fit under the side of the bath. Therefore, carefully cut it with a grinder to the desired size.
5. Smear the joint with the bathtub seam with sealant.
6. Treat the brickwork with a deep penetration primer.
7. Apply a layer of waterproof plaster.
8. Lay the tiles.
9. Treat the joints with special antifungal agents.
10. Install the hinged door.

Installing a stationary screen with your own hands is not at all difficult, the main thing is self-confidence.

Installing a sliding screen

Using the markings applied to the walls and floors with a marker, set the vertical and horizontal parts of the frame, respectively.

To do this, you need to use a level to accurately set their position. Then mark the position of the holes and drill them with a drill or punch.

If the frame was made by hand, then the number of fasteners is selected individually with their even placement every 25-40 cm.

The diameter of self-tapping screws or screws must be at least 10 mm, and the length must be three times the thickness of the material.

First you need to install the vertical racks, but without rigid fixation, and then the horizontal ones.

An important point is the exposure of all parts in a single plane without distortions.

You can control the position using one of the shutters, first on one side of the bath, and then on the other. Only then should the fasteners be tightened.

At the next stage, install additional vertical racks designed to strengthen the frame.

If the design provides for the installation of shelves, then they should be installed at this stage, since after the installation of the doors, access to the space under the bathroom will be limited.

It is imperative to control the position with a level in order to prevent skewing, as this is fraught with the constant convergence of the flaps from the place.

Pull the doors open and fasten the guide securely first on one side and then on the other. After that, install decorative overlays outside, if they are provided for by the design.

Removable screen installation

Therefore, in most cases, there are no problems with installation, since all parts are fitted and attached relatively easily to the walls and the bath itself.

Installation instructions assumes the following actions:

1. On the side of the bath, mark with a marker the middle of the upper plate for fastening the structure.
2. Attach the screen to the bath in such a way that its upper part goes between the mount and the side flush with the end part.
3. Mark the mounting location in the installed position. Roughly, it should be on a specially applied mark or below (up to 20 mm) from the side of the bath.
4. Tighten the supplied studs and secure the installation studs securely. If there were no fasteners in the kit, then you can use nuts with a thread diameter of 10 mm.
5. Fasten the brackets for fixing the screen to the stud.
6. At the corners, mark the places for the 3.5 mm holes and drill them with a drill or screwdriver.
7. Put the shields back in place and check the alignment of the holes. If there is a slight misalignment, you will have to re-drill a little in order to prevent deformation or damage to the structure while tightening the fasteners.
8. Screw self-tapping screws into the holes, and from above close them with decorative plugs, which simultaneously perform a moisture-protective function and prevent the occurrence of corrosion processes.

It is quite simple to install the screen under the sliding, stationary or removable bathtub with your own hands. The main thing is to observe the installation technology and the sequence of actions.

Only with a competent approach will the structure be able to serve for a long time without breakdowns and the need for additional maintenance.

Installing a screen under the bath with your own hands

After the repairs in the bathroom have been made, tiles have been laid on the floor and on the wall, pipes and all plumbing have been replaced, new accessories purchased, many believe that the repair in the bathroom is over.

If there is a basin under the bathroom, water and sewer pipes are visible, all this does not add aesthetics. Nevertheless, all this can be fixed by installing a screen under the bath, with which anything that does not decorate the external design can be hidden. Since how to install a screen under the bath, is it necessary to invite specialists for this, or can you do everything yourself? For this, an instruction has been specially developed, guided by which, you can mount such equipment.

In order to fix the screen under the bath, you will need tools such as:

The screen will help to disguise the place under the bathroom, where most people are used to storing things they need and don't need.

People have always tried to disguise the place under the bathroom, where most people are used to putting necessary and unnecessary things.

Previously, most people simply preferred to lay the front side of the bathroom with a brick, it turned out such a wall that was tiled. This option is quite acceptable, but it has one significant drawback. If there is a leak, then the capital structure will need to be broken, which creates a certain kind of difficulty. Currently, for these purposes, instead of brick, drywall is used, while it is imperative to leave several revision hatches.

However, one must take into account the fact that such windows may not be enough if a major accident occurs, so this option is also not ideal.

Therefore, in order to hide unsightly places under the bathroom and at the same time, if necessary, quickly gain access to the pipes, it is necessary to install a screen under the bathroom. Mounting such a screen is not difficult; dismantling it is also not difficult.

The design of such a device as a bath screen is quite simple.

It is a simple screen, which, in addition to the decorative function, will also perform a camouflage one. With the help of such equipment, you can hide the heating pipe system. Once the installation screen is complete.

additional space appears in order to store things and detergents there, since the screen can be used as a fairly spacious cabinet.

Installing a screen under the bathtub is especially popular in small apartments where the bathroom is small and this space needs to be used to the maximum.

Screen mounting scheme.

There are many such designs today, but screens with doors are the most popular, they open and close like an accordion.

If we talk about practicality, it is best to stop your choice on the design of sliding screens, the doors of such equipment move on rollers along the frame profiles.

Installing the screen under the bath: instruction

One of the most important qualities of bath screens is that they are easy to install.

All work can be done by hand, since such equipment is sold already assembled. Thus, all that needs to be done is to take the screen out of the package, and then insert the handles-holders into the special holes made of plastic.

After that, you need to screw the legs into the lower part of the rack, they are the support. Now the equipment must be installed directly under the bath. When the installation is complete, the support legs should be unscrewed until the moment when they firmly rest against the floor.

How to install a bathroom screen: a step-by-step installation guide

After that, the structure will be fixed and become rigid and strong. When such equipment is being installed, pipes can become an obstacle, in which case part of the screen is cut out.

Before installing the screen under the bathtub, it should be borne in mind that you should not completely close the space under it, since it may be necessary to repair communications under it. Therefore, it is recommended to make a sanitary cabinet or a hatch that can be hidden.

When installing such equipment, skirting boards can create problems, but this is easily solved: you just need to cut holes in the panel of the desired size.

Screens are made of a material that allows you to do this. There are inexpensive curtains that are reminiscent of wall panels made of PVC (MDF or chipboard can be used).

More solid designs use plexiglass, thick plastic, or tempered glass. In order to make frame frames, materials such as aluminum, galvanized steel or chipboard are most often used.

Since the installation of a screen under the bath is designed to hide its side, before starting such a process, you need to plan in advance how such a process will be carried out.

Before installing such equipment, you need to make a structure of drywall, such a structure will be attached with tiles. All measurements must be made in advance before starting work.

When a screen is installed under the MDF bathtub, the whole process is carried out in this way:

Diagram of a bathtub with a screen.

1. The first step is to mount a frame made of wooden beams.
2. The first wooden beam must be attached to the wall at the height of the bathtub, for this, ordinary screws or dowels are used.

   Fastening materials should be selected depending on what materials the walls will be made of.

3. The bars are connected to each other using furniture corners by means of self-tapping screws.
4. When the front part of the frame is being installed, it is necessary to take into account the possibility of access to the communication systems located under the bathroom, so that they can be repaired in the future.
5. The finished frame should be sheathed with plates of the desired size from MDF, they must be prepared in advance.
6. Before fixing such equipment, a special sealant must be applied to the upper frames of the frame and cladding (where it touches the bathtub), which is characterized by increased moisture resistance.
7. Before starting work, the bathroom should be freed from all furniture, appliances and everything else that may interfere with the installation.

When installing a screen under the bath, you need to take into account the fact that if the height of the bath legs allows, then inside the assembled equipment it is possible to make shelves for different bottles, and on the side you can make a pull-out shelf for the bathroom.

When installing screens under a bathtub, which is made of acrylic (this material is very popular), you need to take into account some circumstances.

In particular, before installing the screen under the bathtub, the bottom should be reinforced; for this, a frame is mounted under the bathtub to support the bottom of the acrylic bathtub. If everything is done correctly, the bottom will not bend under the weight of water and humans. Thus, it becomes clear that there is nothing difficult in fixing such equipment. The instruction is developed by highly qualified specialists, so the result will be positive.

Installation of acrylic bathtubs on a frame and brick with wall fastening

Why acrylic bathtub

Acrylic bathtub differs in the structure of plastics. The inner part is made of transparent plastic - acrylic.

It contains special accessories that ensure the bath:

1. Hygienic properties. Thanks to the smooth surface, a person feels comfortable, and the inside of the bathroom is practically free of contamination, which prevents the growth of harmful bacteria.
2. Repeatability. Small lace or scratches can be repaired.
3. Plastic.

   The product has different shapes when exposed to high temperatures.

4. Variety of colors. To achieve the desired color in acrylic, a special powder is added before the polymerization phase.
5. Resistant to extinction.

   Over time, the tap product does not lose its original color.

Acrylic bathtubs are available due to their wide functionality and low weight.

Like any material, it also has acrylic defects, which are expressed in:

1. Sensitive to products containing sanding and alcohol. To wash the product, use a special detergent to prevent damage to the thin acrylic film.
2. Poor heat resistance.

   Hot water softens the plastic and can deform.

3. High price. Baths of the same volume of iron or cast iron are much worse than acrylic counterparts.
4. Mechanical fragility. The product may be damaged by dropping a heavy object or insufficient accumulation.

To reduce the aforementioned disadvantages of sanitary ceramics from acrylic, you need to use special detergents, first pour cold water, then dilute it with hot water, and firmly strengthen the structure in the bathroom.

In the article, we will take a closer look at the method of attaching the bath to the place of its installation.

The figure shows the location of the frame and the bottom of the brick base.

Installing a corner acrylic bathtub on a frame

The following tools and materials will be needed to use the acrylic bath, install the screen, and seal the joints:

• perforator with a drill 8, 10 mm;
• Drilling with a drilling diameter of 6, 8, 14 mm (14 mm can be made from a drill);
• Phillips screwdriver;
• writing knife;
• tape and pencil;
• level;
• car keys 8-13 mm (size depends on the equipment used);
• saw or electric saw;
• a brush for pumping dry oil;
• foam gun and silicone gun;
• area from 30 to 30 mm;
• linseed oil, silicone and foam;
• screws and connecting nuts with a diameter of 10 mm:
• Self-tapping screws with matching dowels and locks from 6 to 8 mm;
• brick;
• metal corners with sides 50 mm and a length of 60 mm in the amount of two pieces;
• external plastic corner for tiles.

Before installing the bathroom, it is necessary to complete all finishing work in the room, as well as install a hot and cold water distribution point and a drainage channel.

Possible wastewater treatment method.

It is advisable not to remove the transport film from the bath until the end of the work.

In order not to swallow the tampon, it should be covered with linseed oil.

Consider, for example, the installation of an acrylic corner bath 800 mm wide and 1600 mm long made by Kolo (Poland)

Corner acrylic bathtub.

The plumbing kit includes a mounting kit: square supporting pipes, legs, metal brackets, fittings.

But this is not enough for quality digging. It is necessary to create an additional solid structure. Follow the order to install it:

1. Connect the legs and hoses included in the kit.
2. Tighten the tubing to the bottom of the tub with your feet.
3. Place the bathtub in the installation location and position it according to the level.
4. Using a pencil or marker on the wall next to the product, use a line around the entire periphery of the bottom of the tub.
5. Remove plumbing fixtures from the site.
6. Attach the metal brackets to the wall.
7. From cutting cut products with a length equal to the distance between the metal handles, the handle and the edge of the tub.
8. Fasten the cut pieces to the wall so that the container rests against it after installation.
9. Measure the distance from the bottom of the support beam to the floor, which is based on these measurements made of wooden elements from wood.
10. Use the silicone seal to the side of the wooden surface against the wall and install it as shown in Figure 4.
11. Place the tub on the new frame, check its position and install the frame and rim.
12. Under the seat, mark the location of the corners to secure the wooden support.
13. Remove the tub in a safe place and fix the wall corners, support rod corners and stop them.

    As a result, the seat must be supported by the structure shown in Figure 5.

14. Attach the siphon and insert into the bath. Place it on a sturdy frame and hold it.
15. Connect the siphon to the drain and check the tightness of the connection.
16. Between the wood lining and the top of the rim, the hole into which the extra support has been added is securely inserted to create a load-bearing (Fig. 6).

Installation of acrylic bathtubs on an additional bar frame.

Photo 5. Installation of corner acrylic baths.

Fixing the acrylic bathtub on the wall.

The frame adjustment level is complete, follow the steps below.

Installation of acrylic bathtubs on bricks

The bottom of the acrylic product is located on the channel, but cannot fix the bottom positions securely.

The plastic softens under the influence of temperature, if it does not strengthen during digging, the bottom will dynamically change its position. Over time, these loads can damage the acrylic. Once the installation of the acrylic bathtub is complete, it is advisable to additionally reinforce it with bricks and foam.

Photo of acrylic bathroom installations on brick.

Work order:

1. Measure the distance from floor to floor.
2. Based on the measurements, select the number and size of bricks so that they are sufficient to accommodate the entire area of ​​the bottom of the tub at a distance of 5-10 mm between the base of the brick and the bottom.

   Instead of a brick, you can use a block or its fragments.

3. Fill the foam gap. Once the foam has cleared, the bathroom is ready to use.

This installation of acrylic bathtubs on bricks provides not only an even load on the product, but also a secure fixation and reduced heat loss.

Installing the screen

The side screen of acrylic bathtubs is often sold separately. For rectangular structures, the side part can be made independently, for example, from plasterboard with subsequent plates.

In this case, the screen is placed at an angle for ease of stowage of the legs during implementation, and some work in the bathroom. For the same purpose, the lower part of the center is a hole 200-300 mm wide and 100-150 mm high.

Such protection would be difficult to produce for corner products. Therefore, it is advisable to buy a standard bathroom screen. This attaches fasteners, brackets and spring legs.

This kit does not guarantee structural rigidity.

Consider one of the options for strengthening the screen

Attach the metal handles and stop up to the tub and wall so that it is locked at the borders and grips the tub in an upright position.

Place your feet in the side guard mounting holes.

Prepare a beam of 6 pieces. with a height corresponding to the height between the edges of the screen.

A neat bath for photographic fixation.

In the four prepared elements, make a hole on the side with a diameter of 14 mm and a depth equal to the height of the union nut. Since the nut must fit snugly against the tree, the holes must not be repopulated.

Walnut wood products will serve as additional support legs and others as accessories.

Connect the nuts to the handle.

On the protection page, mark the holes for attaching the timber to the screen. The bracket should be installed in this way: there are no holes on the sides, and the other four parts are evenly distributed according to the protection taking into account the existing legs.

In places where the panel will be installed without union nuts on both sides of the rim, make holes with a diameter of 4 mm in the middle and make a cover to match the head of the screw head, flush with the product.

In the mounting positions of the rod with nuts, make 4 mm holes with a hinge in the top of the guardrail and a 10 mm hole on the opposite side.

Fix the wooden elements firmly to the screen and fix them with screws and bolts according to the purpose.

Place the protection in place, stretch it with the bolts located on the additional support legs between the floor and the side of the bath.

Corner acrylic bathtub for photography.

Sealing gaps

A slot is formed between the plumbing and the wall.

To prevent water from entering the wooden frames of the frame and floor, it should be covered. The initial gap can be removed with silicone and the outer corner of the plastic tile.

The photograph covers the gap between the bathroom and the wall.

First, they are marked, and accordingly the lengths and corners of the corner are cut off.

Then the slot is filled with silicone and the prepared corner is inserted into it.

Closing the gap between the corner bath and the walls.

After a day, the design becomes airtight and fits perfectly into the bathroom.

Remove acrylic product

The life of acrylic in comparison with the analogue of cast iron and steel is short.

The bath may leak due to non-compliance with the rules for the supply of acrylic, mechanical damage to the case, etc. If there is no possibility of recovery, the product must be replaced. Since the product is firmly attached to the floor and walls with silicone and foam, follow the disassembly procedure:

1. Remove the side protection of the tub and remove it to an inaccessible place.
2. Cut off the foam layer between the brick and the bottom with a saw blade.
3. Get a replacement cleric knife blade between the outer plastic corner, which closes the gap between the walls of the space and the shoulder of the item and the wall and cuts through the entire periphery of the silicone.
4. Remove the corner from the socket.

   Installing a screen under the bath with your own hands is available for everyone and does not require special skills

   If it cannot be detached, cut the seal by lifting the corner for the free end.

5. Since the container is secured with metal straps, secure one end to the edge of the groove. Do the same with other clients.

This removes the uninstall of the product. When replacing a model like this, you don't need to fix the frame.

Profile Views:

How to install a bath screen: step-by-step installation instructions

Everyone has their own aesthetic preferences, therefore, the style variety of bathroom interiors is huge.

However, on one issue, almost everyone is unanimous: the lower part of the bath should be closed from the sides. For this purpose, special screens for the bathroom are used. They are lightweight, beautiful and easy to install.

Bathroom screens are needed to disguise unaesthetic details, the space under the bathroom, and sometimes to get additional space for storing household items.

A few decades ago, these functions were performed either by light curtains or blind brick walls, trimmed with tiles.

Two in one: aesthetics and functionality

Entering the bathroom, a person sees a bathtub. If the screen is not installed, then the legs of the bath, elements of the plumbing system are visible.

They seem ugly, and the whole bathroom looks sloppy. The screen can be a wonderful decorative element that will cover all unnecessary and help to decorate the room in a uniform style.

Soviet times, it was difficult to find a worthy alternative to the brick walls under the bathroom.

Now there are structures made of light and beautiful materials, but brick screens are still installed in some apartments.

The design will protect the pipes from moisture and damage, and will become an additional cabinet where you can store household chemicals, household items, plumbing tools and other useful items.

Screens are not only beautiful and practical, they can act as a reliable barrier that blocks access to household chemicals for children and animals

What kinds of screens are there?

Now you can buy screens for bathtubs of any design and made of any material. Decorative panel manufacturers involve experienced designers in the design of their models.

They develop original designs that can fit into even the most sophisticated interior.

For the manufacture of screens, plastic, metal, MDF, polystyrene, drywall, polyvinyl chloride, acrylic are used. Patterns, subject pictures (photo printing), decorative elements can be applied to the surface of the product.

Often there are models made of combined materials.

Frames for modern screens are made of aluminum, steel or plastic.

Often, buyers choose models with aluminum frames, because they are durable and affordable

Glass and mirror screens look very original. They are used not only for their intended purpose, but also for modeling the space of bathrooms.

For such panels, not ordinary glass is used, but organic glass, because it resists mechanical damage and shock better.

When choosing a material, you should pay attention to its strength, resistance to moisture and high temperatures.

A quality model can last for decades.

Good performance means a higher cost per structure, but this is a case where the investment is well worth it.

Models in the form of lattices are chosen by people who care about good ventilation of the space under the bathroom.

This helps to avoid dampness, fungus and unpleasant odors.

We select a convenient design

Screens consist of a frame (most often aluminum) and panels. They can be deaf or equipped with doors for access to communications and items stored under the bathroom.

There are also models with removable panels, which are usually installed under acrylic bathtubs.

The advantages of blank panels are high aesthetics and durability. A smooth surface can be decorated in any way or left unicolored.

It will look pleasant regardless of the presence or absence of additional decor. Due to the absence of moving parts, these bath screens last much longer.

The disadvantages of deaf stationary structures include the inconvenience that occurs in the event of breakdowns in the plumbing system. To access it, you will have to remove the entire panel.

This takes a long time, which can cause problems if a leak forms and water accumulates under the bathtub.

In some interiors, screens perform a style-forming function.

Luxurious bright model looks very attractive if the other design elements are monochromatic or made in the same style.

Door designs are more practical than deaf ones.

The doors themselves can be hinged or sliding. Both options have their own advantages and disadvantages.

In most cases, bathroom owners opt for sliding models.

Hinged doors open and close conveniently, providing access to shelves with the necessary little things.

Bath screen. Application, types, installation and price of a bath screen

However, a screen with such doors should not be chosen for a small bathroom. Open, they take up useful space and make it difficult to manipulate the elements of the plumbing system.

Doors of sliding screens for a bath open, sliding along the guides. When buying such a system, you should pay special attention to the quality of the metal.

The stronger it is, the longer the bath screen will last. Better to give preference to steel or aluminum.

There are models with plastic frames. They are less reliable, but they are quite suitable for apartment owners who are not going to store frequently used things under the bathroom, such as washcloths, towels, shampoos, hygiene products, and household chemicals.

If the doors are needed only for access to communications, then you can buy a plastic system.

The doors can swing open not only to the left or to the right. There are models with folding elements. They have the same advantages and disadvantages as swing screens.

Model selection: important nuances

First, decide on a design that suits your goals.

The most convenient options:

• Deaf stationary model with a technical opening without a door. This design is usually preferred by craftsmen who do everything in the house on their own. It is simple, easy to access pipes, but does not imply the arrangement of a mini-storage under the bathroom.
• Removable stationary model without a technical opening. If you choose a similar model, then try to stay on a panel that can be easily removed if you need to repair pipes.
• Screen with hinged doors.

  If the bathtub is spacious, then there will be no problems at all. If the area of ​​the room is small, carefully calculate the size of the doors so that they do not occupy the entire bathroom.

• Sliding door model. It is a versatile screen that will fit in any bathroom.

When choosing, you need to pay attention to the type, size, design, type and performance of the material

Measure the space you want to cover before purchasing.

Standard screens are 1.5, 1.6 or 1.7 m long and 0.5, 0.55 or 0.6 m wide. There are also models of other standard sizes.

So, on sale you can find screens 1.05x0.5 or 1.9x0.5 m.

If you set a goal, you can find a model for any bath. The only difference is that among the screens of non-standard sizes, models of non-trivial design or with a unique decor are less common.

If you are satisfied with the design with a smooth, monochromatic surface, then this option can be found in any size.

Sometimes there are doubts about the required width. This happens when the screen is picked up before finishing work in the bathroom.

Often the owner himself does not know the exact dimensions until the bathtub is installed and the tiles are laid on the floor.

The problem with the selection of a model of the required width is also relevant in cases where the floors of the room have a slope. You can solve it using a screen on adjustable legs.

During installation, the legs are set to the desired height on each side.

Models with adjustable legs must be selected in length, because the width can always be adjusted. Adjustable screens are available in solid colors or with a variety of decorations

The best manufacturers of bath screens

As for the manufacturers, there are many of them - both domestic and foreign.

Among the Russian manufacturers of screens, the trade marks "Techno", "Vann Bock" (the "Karavann" company), "Remstroyplast", "Ciar", Aquamate, Ecroline have proven themselves well. Their main advantage is their versatility.

Russian manufacturers take into account the diversity of the sanitary ware market and produce models that are suitable for installation under baths of different brands.

They offer a variety of designs, over 30 color shades.

Materials - a wide variety, including semi-soft nonwoven panels.

A big plus of domestic screens for baths is an affordable price. They are much cheaper than imported counterparts of the same quality, but they can be inferior in design and decoration.

Among the foreign manufacturers are the Italian brands Jacuzzi, Albatros, the Finnish brand IDO and the German Kaldewei.

All of these companies produce high quality products, but often the screens are only suitable for specific bath models.

Sliding models of the Professional collection of the Vann Bock trademark are made in black and white colors. There are organic glass screens. They are completed with beautiful chrome-plated metal handles

Steps for installing finished models

Ready-made screens for the bathtub are completed with frames, fittings and fasteners.

All this should be indicated in the technical documentation for each specific model.

Installation instructions should also be included. Please make sure everything you need is included before purchasing.

If the dimensions are selected correctly, then a minimum of tools will be needed for installation: a tape measure, a building level and a screwdriver. It is recommended to fill the bath with water before starting work.

If the bath and the screen are installed at the same time, this is not necessary.

Screens can vary in shape and design, but the installation scheme is always approximately the same:

• Measurements and markings.

  Before installing the frame, you need to measure the niche under the bathroom again and mark the frame attachment points. If the panels do not fit a little due to the curvature of the walls or floor, they are cut with a grinder.

• Installation of the frame. The frame is mounted under the bath and fixed in accordance with the instructions, and the guide W-shaped profile for sliding models is also installed and aligned.
• Adjusting the legs. If the model has adjustable legs, they are unscrewed so as to achieve maximum fixation of the frame between the floor and the bath rim.

  To keep the supports stronger and the screen not to shake when water is poured into the bath, you can apply a little sealant under each leg and press it to the floor.

• Fastening the frame under the bath rim. When the frame is firmly fixed, the space between the edge of the frame and the bath rim is blown out with polyurethane foam. This will add additional rigidity to the structure.
• Installation of panels. Decorative panels are installed on the frame. If the doors are hinged, they are hung on the hinges, the sliding doors are inserted into the guide profile. Handles are screwed to the doors.
• Treatment of seams. It is desirable to treat the joints with a sealant. This will help protect the niche under the bathroom from moisture.

Installation of screens for acrylic bathtubs has its own characteristics.

Most often, these baths are pre-equipped with screens that are suitable in shape and size. Models are usually made of plastic. The kit includes a frame, panels, handles, brackets, dowels, screws.

The pictures show the whole process of installing a screen under an acrylic bathtub. Installation of screens under baths made of other materials has some differences.

For example, in cast iron models, you cannot drill holes at home, since there is a risk of cracking the cast iron

If the bathtub is not equipped with a screen, then it can be made independently from a wooden block and ready-made plastic panels.

The frame is attached to the side of the bath with liquid nails, the joints are additionally strengthened by cold welding.

To secure the lower brackets, drill holes in the floor and install dowels.

After installing and adjusting the frame to size, insert the screen panels into the guides.

A sign that they have fallen into place is a characteristic click.

There may be some difficulties with the installation of decorative panels for a corner bath.

The sequence of correct installation of a corner acrylic bathtub with a screen is shown in the video:

DIY screen making and installation

Many of our compatriots are used to doing everything in the house on their own.

Such craftsmen can mount the screen under the bath with their own hands.

The video describes in detail how you can make a blank screen with a technical niche.

Plasterboard was chosen as the material of the panel, finishing - facing tiles.

The range of bath screens is huge. It's very easy to get lost in this variety. If you are having difficulty choosing and installing the correct model, seek advice from an experienced technician.

This is much safer than learning from your own mistakes.

Installing a screen under the bath with your own hands: design options
How to install a screen under a bath - installation nuances - Construction tips
How to install a screen under a bath: installation steps of different types
Do-it-yourself bath screen: how best to make, install
Installing a screen under the bath with your own hands: two options How to install a screen under a bathtub with your own hands - analysis

Installing a screen under the bath with your own hands

Installing a screen under the bath with your own hands will help not only save money on the improvement of the bathroom, but also bring to life any technical ideas and design solutions.

To add your own unique style to the bathroom interior, it is better to do the repair yourself. In addition, it will not be difficult. In this article we will tell you what materials are used when installing bathroom screens and how the wizards work.

Types of screen materials

How to install a screen under the bathtub and what material to choose? The answers to these questions depend solely on the imagination of the owner, the funds available and the size of the room.

The partition under the bathroom is most often made of brick, MDF, drywall and plastic, but each of these materials has its own pros and cons. For example, brick has more disadvantages than advantages. Obvious cons:

• heavy material (inconvenient transportation, stacking);
• requires additional materials for cladding, for example, the same drywall;
• a brick screen will take up a lot of space, and it is unlikely that it will work to build shelves in it;
• the brick has sufficient hygroscopicity, which over time will lead to its delamination;
• it takes a lot of time to lay and shrink the partition, in contrast to the manufacture of the screen from other materials.

Everyone chooses for himself what to build the screen from.

Perhaps someone conceived to make a blind partition under the bathroom, closing this place until the next repair, which sooner or later will come when problems with the drain begin. One of the advantages of a brick partition can be considered the fact that for its device it will not be necessary to build a frame, even if the project provides for the construction of doors.

Bath screen. Types, selection, installation

You can show your imagination and make the brickwork flush with the edge of the bathtub, leaving a small area, and lay out the steps and a niche for the legs below. Of course, if you choose a brick for the construction of the screen, then it is reasonable to leave access to drainage communications.

MDF boards are also quite popular in the manufacture of screens.

But it should be remembered that MDF panels are made of shavings and are afraid of moisture. Before construction, the panels should be treated with a special solution.

Moisture-resistant drywall is also suitable for covering the screen. It is very convenient in construction, they can easily equip the internal space under the panels by building shelves there.

From above, the drywall is often covered with ceramic tiles, which are laid, as usual, with glue and followed by grouting.

To protect the interior from dampness, it is necessary to make a plastic grate.

Such an air vent is cut or left in the construction of a screen of any material.

Vent size: minimum width 5 cm, length not less than 10 cm.

In almost all materials, with the exception of brick, you will need to build a frame from a profile. We will describe in detail further how the frame is built and how the facing material and the door are attached to it.

Preparation for work

For the construction of the screen, we have chosen the most popular material - moisture resistant drywall (GVL).

Plasterboard sheets are used everywhere in construction, as it has earned the trust of the craftsmen. Another factor when choosing is the acceptable cost of GVL, which protects the wallets of the masters from unreasonable spending of funds.

We choose high-quality materials for construction.

The metal profile must be made of hard steel and must be galvanized.

List of required tools and materials:

• electric drill with screwdriver function;
• drills (one for metal and one - victorious - for concrete);
• dowel-nails;
• self-tapping screws with a press washer;
• mounting tape and corner;
• hacksaw and scissors for metal;
• drywall, metal profile;
• tile;
• tile glue, liquid nails;
• plastic sheet;
• canopies for the door.

Installation of metal profiles and cladding

The installation of the screen on the bath begins with the arrangement of the frame.

We will show works that are suitable for standard placement of a bathtub in a room, when only one side is closed and a door is installed on the other.

First, you should make the markings for the uprights. Make marks on the two walls of the bathroom, stepping back from the side of the bath in a certain distance. To find out exactly how far to retreat, you should measure the thickness of the ceramic tiles, the thickness of the purchased drywall and estimate the thickness of the tile adhesive layer.

Approximately 19-23 mm should come out. Having measured the required number of millimeters, we leave room for the subsequent facing of the partition.

To find out how much space the screen wall will take, add up the thicknesses of the tile, drywall and profile.

To this value, add the thickness of the tile adhesive (at least 3 mm).

Measure the height from the floor to the bottom of the tub. Using the resulting size with a hacksaw for metal, cut off two pieces of metal profile for the side posts. Drill two holes in each post, 15 cm away from the ends.

Place uprights against the wall to mark where to drill holes in the concrete.

Do not forget about the marks that you made earlier, because it is on them that the racks are installed. We make marks in the wall along the holes in the profile. Having changed the drill to a victorious one, we drill holes in the concrete wall with an electric drill.

We fasten the vertical racks-guides with dowel-nails. Having done this operation, two horizontal guides of the profile should be forwarded.

Measure the exact distance between the walls and saw off the metal profile with a hacksaw. Usually this distance corresponds to the length of the bath.

If you are installing the screen under an acrylic bathtub, insert another one into the upper guide profile. This will strengthen the edge of the bathtub, which is most susceptible to mechanical stress. If you have a cast iron or metal bathtub, then one guide profile is sufficient.

Connect the horizontal profiles to the posts with self-tapping screws.

Complete the resulting frame with uprights in the middle of the structure.

You should now have approximately 5 uprights. Before attaching them, you need to trim the corners with metal scissors from above. From the bottom, the racks are inserted into the horizontal guide profile.

Prepare the door frame and choose which side it will be on.

One edge of the door frame is the upright against the wall. Calculate the width and height of the future door and insert a frame-opening for it from the profiles cut to size into the structure.

Sheathing the frame with drywall is not difficult. The main thing here is to try to ensure that the joints of the sheets converge on the profile. An opening for the previously purchased grille should be cut from the opposite edge. This hole will ventilate the inside of the screen. After tiling, the lattice can be glued onto liquid nails.

The principles of installing ceramic tiles in the bathroom can be found here.

You can read about the different types of bathroom screens here.

Screen door manufacturing

The screen door can be ordered, and it will be made of any material. However, you can make and install the door yourself.

The material for it can be drywall or plastic, as well as either both materials together. You will need to buy a plastic skirting board up to 20 mm wide and a door handle.

From the profile, make a frame for the door strictly according to the dimensions of the opening. Cut a sheet from the material you have chosen and screw it onto the screws to the metal frame.

You can cover the door not only with tiles, but also with plastic glued to liquid nails.

The last option is simpler - with its implementation, the difficulties of installing the handle will not arise at all. Moreover, such a door will last longer. The main thing is to choose the plastic that matches the color.

The plastic skirting board is glued along the edges of the door with a slight overlap on three sides in order to hide gaps in case of minor miscalculations. After that, a door is installed on the awnings.

It remains only to lay the tiles on the screen, and the work is ready!

The problem "How to install a screen on a bathtub" is solved. As you can see, if there is a steady desire, everyone can do this work.

The bathroom has been renovated, the eyes are pleased with the tiles laid out in even rows, the taps are shining, new plumbing has been installed, it remains to refine the space under the bathroom. How to install a screen under the bathtub so that it performs not only decorative tasks, but is practical and functional.

• improving the design of the room;
• masking of pipes and drain-overflow systems;
• storage of household chemicals and necessary trifles.

The design options are so diverse that the choice will not be easy:

• deaf;
• swing doors;
• sliding doors;
• accordion doors.

As a material for the manufacture of a structure, the following can be used:

• drywall;
• plastic;
• acrylic;
• brickwork.

The facing of the material can be any, based on your taste, imagination, planned cash costs: tiles, mirrors, mosaics.

Mosaic can be an excellent alternative to ceramic tiles.

The tiled frontal surface made of bricks is a thing of the past - there is no need to return to it. Any breakdown or simple replacement of pipes required the destruction of this capital structure, which led to additional money and labor costs, dust, dirt. Therefore, it is better to use screens that give access to pipes, or at least have a plumbing escape hatch.

Diy screen installation steps

The main stages and sequence of work:

• Take the necessary measurements
• Mark the points of attachment of the product
• Assemble a frame of the desired size and shape from a metal profile
• Attach the cut-out panels to the frame
• Make the panel cladding with the selected material.

Metal profile bathroom frame

When installing a blank panel, you should not completely cover the entire space. To access the communications, it is necessary to make a hatch, lined from the outside with the same materials as the main structure. Removable suction handles can be used to remove the hatch.

Access hatch to drain system and pipes

How to properly install an acrylic bath screen

Acrylic bathtubs are usually sold complete with screens.

Installing the screen on an acrylic bath is done as follows:

• On the side of the bathroom, mark the fixing points
• Attach the shield to the bathtub, leading the top between the rim and the mount
• Mark on the structure the attachment point that coincides with the marks on the side of the bath
• Screw on the mounting (installation) studs
• Drill holes for self-tapping screws in the marked places
• Check the alignment of the holes;
• Attach the product with self-tapping screws, install the plugs.

Advantages and features of installing a sliding screen

Most often, a conventional sliding screen is installed in the bathroom. Its main advantage is easy access to communications.

Installing a finished sliding screen

The screen can be bought ready-made, or you can make it yourself. If you have already bought a screen, then all you need to install it: keys to set the legs of the product to the required height, and a little physical effort:

• Bring the top of the screen under the bath rim
• Tighten the legs so that there is no gap between the top of the product and the bathtub - until it stops
• The bottom should be installed perpendicular to the floor.

Sliding design is aesthetic and functional

But you can make a sliding screen yourself. Despite the low cost of the finished product, many DIYers do not want to buy it in the store. This may be due to the peculiarity of the bath itself - the finished screen cannot be mounted. Baths with non-standard sizes and shapes can be covered with special screens, which may not be available for sale. We will give several recommendations for the installation of a sliding screen for curved bathtubs.

Making a sliding screen for a curved bathtub

For screens for bathrooms of non-standard, rounded shapes, you will need to make a frame from a drywall profile. But you can use a special aluminum profile for curved structures. This profile easily takes the shape you want.

• You need to prepare two profiles: for the upper and lower parts of the bath and fix them with self-tapping screws.
• The next step is to install vertical slats, as shown in the photo.

• If you are going to mount a drywall screen, then its sheets must be cut to size and moistened with water. The sheets will become more flexible. Shape the sheets as desired.
• If the screen is made of plastic panels, but they must be cut to size and inserted into the guides.

A sliding screen for a curved and a regular bath can be made of different materials. For example, make a frame from a bar. The manufacturing technology is very similar to that described above.

Secrets of installing a screen under a plasterboard bath: video instruction

After reading the instructions, it becomes clear how to install the bath screen. But in practice, it can be quite difficult to cope with the installation with your own hands. Requires a special tool, certain skills, the correct selection of the required material. If you doubt quick and high-quality execution - entrust the work to professionals.

Installation of a purchased screen on an acrylic bath takes place in the same order if it has a traditional rectangle shape. However, the design of acrylic bowls has so many bizarre shapes that it is often impossible to find a ready-made device. Of course, some German brands complete their fonts with decorative screens, but not everyone can afford them.

To close the space under the curly acrylic bowl not equipped with such a product, you will need to make the wall yourself:

• For these purposes, PVC lining is best suited. It bends well, which will allow you to easily repeat the outlines of a curly bowl. All work begins with marking and first of all, markers must be applied to the sides of the bath with a marker, where the frame will be fixed to the metal frame of the font.
• The frame itself is made of a galvanized drywall profile. It is easy to give it the desired shape by notching the side shelves at the bending points.
• Now these labels need to be accurately projected onto the screen frame. Its upper edge is brought under the side of the bowl and all marks are accurately transferred.
• Having drilled through holes on all marks, check their exact coincidence. The frame is fixed with bolts or studs to the bath frame, after which it is revetted with clapboard.

There is an opinion that it is easier to install a screen on an acrylic bathtub if you drill the side of the bowl and attach it directly to it. Installation, of course, will be easier, but the appearance of the bathtub will deteriorate.

If you take and install an acrylic liner in an old cast-iron bathtub, the font will take on a new look and will serve the owners for many years to come. Work begins with preparation. The bowl is freed from adjacent panels, tiles, the siphon is removed. Before placing the acrylic liner in the bath, take sandpaper and thoroughly clean the enamel. This will ensure better adhesion of the adhesive to the cast iron.

Now is the time to prepare the liner itself. It is placed inside a cleaned cast iron bowl. It is important that the acrylic bath liner fits snugly at all points. Exactly along the side of the old font with a marker, outline the protruding excess of the side shelves of the insert. A hole is marked at the bottom for a siphon, on the side - for overflow. All excess side shelves are cut off with a jigsaw, and the holes are cut with a crown.

The restoration process begins with sealing the overflow and drain hole of the cast iron bowl, as well as its edges. The common surface is covered with an even layer of foam. Now it's time to carefully place the acrylic liner in the tub and press down evenly for a snug fit.

After the acrylic liner has entered the bath well and straightened out, a siphon with an overflow is installed. The elements will press the edges of the liner around the holes. The sides of the bowl are squeezed along the perimeter with clamps. Having closed the drain with a plug, water is collected in the bowl 30 mm below the overflow, and the insert is left under the water load for a day until the sealant with foam hardens. The next day, the water can be drained, the new bowl can be installed in its permanent place, and the sides can be closed with a decorative screen.

The installed insert will allow the old bowl to last about 15 years, and the side screen will hide its old cast iron base.

For installation under a modern design bathtub you will need:

• directly the bathroom screen itself;
• legs and accessories;
• a key of a certain size (depending on the model, the base diameter may differ);
• level.

When buying a product, you get everything you need (except for the tool) in the kit. You do not need to separately purchase bath screen feet, frame stands, rails or handles. Responsible manufacturers and suppliers also offer instructions in the kit. It prescribes all the main stages of installation.

Let's consider the installation process using the example of a sliding plastic structure with an aluminum frame.

1. Insert the top of the bathroom screen under the rim (convex protrusion of the bowl).
2. Place the lower part of the product, to which the metal legs are attached, so that the product is placed perpendicular to the floor (at an angle of 90 degrees).
3. Use a wrench to unscrew the legs until the top of the screen rests against the rim of the bathtub.

Everything! Installing the screen, if you follow all the recommendations, will not take you more than 10-15 minutes.

Similar! The process won't be any different!

If you received a sliding or other plastic structure disassembled, it will first need to be assembled and prepared for installation.

1. Place the guides on a flat surface with the grooves inward.
2. Lay across the rack and align all mounting holes.
3. Tighten the self-tapping screws to securely fix all structural elements.
4. Insert the panels into the grooves and adjust the structure in height.
5. Close the ends with plugs.
6. Screw on the handles (if any).

Now you know how to install a screen under a sliding bathtub, assembled or disassembled.

To properly organize the space under the bathroom, get convenient access to communications and provide the necessary functionality, you need to choose the right screen design.

There are several types of bath screens.

Particular attention should be paid to the method of opening the doors, which have different reliability and require a certain amount of space when opening them.

Stationary

This option is a reliable structure, usually made of durable materials (brick or steel sheets), which is mounted under the bath and lasts until the overhaul is carried out.

Can provide full or partial access to the space under the bathroom.

Access doors are:

• hatch type;
• sliding type;
• folding type;
• swing type.

The advantages of a stationary screen include:

• high strength material, which makes it easy to finish them and even mount tiles on them;
• security additional support for the bath;
• long service life due to resistance to high humidity and mechanical stress.

The disadvantages are as follows:

• impossibility of dismantling without destroying the finish and supporting frame;
• waste of space under the bathroom due to the thickness of the walls;
• heavy construction weight.

It is also worth paying attention to the fact that the installation of such a screen is impossible under an acrylic bath.

Sliding

It consists of two or more sliding doors installed on special rails and usually made of lightweight materials, for example, plastic panels or waterproof MDF.

As well as stationary, they provide full or partial access to the space under the bathroom. However, at the same time, they take up a minimum of space, can be easily dismantled and replaced with others of suitable size.

Many manufacturers additionally equip them with convenient plastic shelves for storing bathroom items.

The total construction cost is minimal compared to others.

But with all the advantages, sliding screens are very unreliable and can easily move from their place even with minor blows or presses. Therefore, they often have to be put in place on their own.

Removable

This model is designed for installation on an acrylic bathtub, its body is made of plastic. Such material has increased decorative properties, but at the same time its practicality and functionality leaves much to be desired.

This is due to the peculiarities of the mountings and the complexity of access to communications located under the bathroom.

Maintenance of communications also becomes difficult and in some cases, in the absence of problems, the owners do not carry out their timely inspection, which ultimately leads to disastrous consequences.

If you look at the cost of a removable screen, then it is overstated several times compared to other designs.

Therefore, it is advisable to purchase them to create a unique design or if it is impossible to install the first two types of screens.

By their structure and appearance, screens are:

• ordinary, that is, the simplest plastic panels of special sizes with a frame;
• universal, which are also plastic panels, characterized in that they have an aluminum frame that allows you to reduce the screen;
• screens without frames, installed under the bath and are the most affordable option;
• end screens, which may or may not have a frame, and which cover the end from the bath.

In specialized stores, you can buy ready-made screens, despite the fact that it is difficult to find the right design and size. But if you have patience and manual skills, such a screen can be assembled with your own hands in accordance with your preferences.

Also, screens for the bathtub are stationary and non-separable, as well as removable and with a sliding door.

Stationary screens are often installed by tiling technicians when installing the tub and the tiles around it. Removable screens are used relatively less often and, as a rule, if the area of ​​the bathroom is small. The advantages of the second option are that the space under the bathroom can be used to store various items that are not used so often (for example, tools, paints and brushes for repairs), as well as various buckets, basins, washing powders, rags and sponges.

Another advantage is that in the event of a leak in the siphon, pipes or cuffs, the entire screen does not need to be disassembled to provide access to the leak.

So, what are bath screens for, and what functions do they perform? These screens have two main functions, and they are as follows:

1. Decorative function. The external cast-iron side of the bath and the many utilities along it do not look so favorable and can spoil the overall impression of a renovated new bathroom.
2. Mechanical protection of the above communications. In addition to the siphon, pipes and cuffs can be hidden behind the screen, through which, for example, a washing machine is connected.

Plastic screen under the bath

Having determined for yourself what the design of the screen will be, you should choose the material from which it is made. The modern market offers various materials or combinations thereof. Each of them has its own strengths and weaknesses, but they all must meet the requirements of hygiene and moisture resistance.

Let's consider some types of screens in more detail:

1. Aluminum screens have an affordable price, long service life, and are also durable. The material goes well with glass and various accessories. You can match the screen to the color of the bathroom interior.
2. Plastic models of screens can have non-standard shapes and sizes. They are easy to install and require little maintenance. During operation, the plastic screen for the bath does not change its quality and appearance. It can be installed with your own hands without the help of specialists. The only drawback is the high cost of the products.
3. The most capricious, but very beautiful option is mirror screens. Even with the high cost and difficulty of cleaning, mirror screens are very popular with consumers.
4. MDF structures are a budget option. They can be either sliding or non-sliding. Huge selection of colors. The main enemy of MDF is moisture, due to which the material deforms.

On the market for building and cladding materials for bathrooms, you can choose screens from a wide variety of materials. When choosing, it is worth considering the rather difficult conditions in the bathroom: high humidity and temperature differences. Mainly used in the production of screens:

• plastic;
• MDF panels;
• polystyrene;
• polyvinyl chloride;
• acrylic material,

In order for the screen in the bathroom to last longer, when choosing it, you must first of all pay attention to the material from which it is made.

Due to the special operating conditions, the screen in the bath must meet the following criteria and requirements:

1. Increased moisture protection... The presence of a protective coating or the moisture resistance of the material itself allows you to extend the life of the screen without deteriorating the mechanical properties or fading of the decorative finish.
2. Sufficient material strength... The rigidity of the doors and the frame itself will provide increased safety and durability.
3. Resistance to high temperatures, which can have a detrimental effect on the condition of the finishing layer. This is especially true for those who like taking hot baths for a long time.

The main material is usually chosen:

• plastic;
• waterproof plasterboard;
• OSB or MDF;
• acrylic;
• brick;
• thin sheet galvanized or polymer coated metal.

Tiles are usually laid on stationary brick or plasterboard screens.

Today, the building materials market offers a huge variety of materials for wet bathroom environments. Let's highlight some of the most common materials from which you can make a screen for a bath:

1. Plastic;
2. Moisture resistant drywall;
3. Brick;
4. Moisture resistant MDF;

And the easiest option is to buy a screen in the form of ready-made sliding doors.

Such material is reliable and resistant to moisture, it also does not need additional painting or varnishing; hygienic and retains its properties for a long time. A variety of colors and shades of material will allow you to choose the material for the screen in accordance with your individual taste.

Plastic lining is usually used as a material. With this option, it is possible to achieve completeness without additional surface treatment; it does not need either priming or painting. In the event of a malfunction of the communications under the bathroom, you can always access this place by disassembling the screen.

To install the lining, you will need to fix the starting profile around the entire perimeter of the future screen. To do this, in the upper part of the bath, it is necessary to fix the bar, to which the starting profile is then attached.

To avoid deformation, fix especially carefully the profiles in the middle of the screen. The lower profile is fixed to the floor with a sealant.

Plasterboard

How to properly install a screen under a plasterboard bathtub? This process is not particularly difficult, the most important requirement in this matter is the presence of waterproof drywall (green). According to the instructions, you should start making the screen with the assembly of the frame. For these purposes, both a wooden beam and a metal profile can be used.

A perimeter profile (UD) is installed along the upper part of the bath, while the lower part of the profile, in order to avoid moisture ingress, must be glued with a sealant.

After that, we install the CD guide profiles vertically, fixing them to the supporting UD profile.

Wooden beams must be treated with an antiseptic to prevent mold from forming on the structure.

Its pieces of the required size are fastened with self-tapping screws along the perimeter of the profile. At the same time, it should be remembered that acrylic is fragile, that when installing the screen on an acrylic bathtub, you must act very carefully, choosing self-tapping screws of the required length so as not to damage it.

Screen for a plasterboard bathtub video instruction

Once the drywall is fixed, you can start priming and upholstering it with any of the selected materials. On the front side, drywall sheets can be sheathed with moisture-resistant wallpaper, ceramic tiles, mirrors, or even decorative plaster. It all depends on the imagination and budget of the owner of the home.

Brick

Brickwork is the most durable option for screens. Often, to simplify work, this wall is built from wall to wall. The desired thickness of the masonry is half a brick.

Despite the apparent strength of the brick wall, it is undesirable to make it close to the bathtub. It is better to leave a small gap, which is sealed with ordinary polyurethane foam.

From above, brickwork is often upholstered under tiles, with an advantageous combination of which you can visually increase the volume of the room. Alternatively, you can make a mirrored screen to add a touch of flavor to your bathroom. Mosaic is also an advantageous and effective solution for bathrooms with brickwork. It allows you to hide the unevenness of the masonry, and the process itself will force you to reveal all your creativity.

Made of MDF material

The process of sheathing the MDF screen is almost similar to drywall, however, it is necessary to prime the sheets on both sides before starting the installation, as well as to make ventilation holes in the screen on the back of the access hatch.

Ready views

Bath screens with sliding doors are a great opening to transform a dull bathroom. They are sold assembled with roller designs similar to those used in wardrobes, with neat plastic doors. According to his taste and discretion, choosing the overall interior of the bathroom, the buyer can choose a wonderful screen of the required size, without much effort. Following the instructions, it can be easily done without the help of qualified experienced craftsmen.

Behind the doors of such a sliding model of screens, you can additionally make shelves for storing household chemicals, and the handles on the doors can be made of removable suction cups that will cling only if necessary. The rest of the time, such a design will be flat, without handles, in order to avoid curious children's hands.

In addition, craftsmen have learned how to make such bath screens on their own. With the use of profiles similar to plasterboard, the whole complexity of the product with sliding doors lies in the mechanism - rollers, which can be purchased at any hardware store. Everything else depends on your imagination. To stimulate your creative inspiration, we recommend watching a video clip on creating a do-it-yourself sliding option.

Corner bath - which screen to install?

The best options for making a corner bath screen are plastic and brick. Plastic - due to its flexibility, is very easy to work with, and the advantage of the brick version is that the entire structure will have maximum strength, and on top it can be faced with ceramic tiles or mosaics. In the case of making a brick screen for an acrylic bath, the plumbing fixture should be installed only after the screen is installed.

Thus, screen designs are as follows:

• deaf;
• with a swing door (with two swing doors);
• with a sliding door;
• with a pull-out block;
• with shelves;
• removable.

When choosing a screen design model, you should focus on the features of the bathroom. In a spacious bathroom, you can mount a screen with shelves on its front surface. Such a structure with shelves should be removable to provide access to communications located under the bathroom.

The most functional screen for a small bathroom is a device with a sliding door. The least practical is a dull screen, since it will have to be completely dismantled in the event of a repair of communications.

The easiest way to hide communications and objects under the bathroom is with curtains. To do this, an ordinary pipe is mounted under the side, but with which the canvas of the required dimensions is suspended. However, such a screen is short-lived and does not look very presentable.

In small bathrooms, you can install mirror screens under the bathtub, visually expanding the space. Mosaic is perfect for finishing structures with curved surfaces. However, good quality tile adhesive can be used to simplify the creative process.

1. the marking of the attachment points is carried out using a level;
2. the necessary measurements are made;
3. the frame for the screen is made of a metal profile;
4. frame parts are fixed in accordance with the markup;
5. panels are cut from a suitable material;
6. panels are fixed to the frame;
7. facing work is carried out.

Please note that when installing a screen under an acrylic bathtub, the fasteners can be mounted directly on the side of the bathtub. However, at home, you cannot drill the side of a cast-iron bath, as this can lead to the fact that the enamel will deteriorate, and then the whole bath. When installing a plasterboard screen, the frame is made of metal profiles. The more complex the planned structure, the more effort will have to be made to install it.

Restoration of an old bathtub with an acrylic insert

The easiest way is to mount a factory-made device on the bathtub. The manufacturer offers a huge selection of models. Before giving preference to one of the products, one must remember that a frame is needed for the wall. You can make it yourself from wooden blocks, but such a structure will not last long due to the high humidity inside the room. The best choice would be a ready-made aluminum frame.

It is optimal to choose the screen itself from PVC plates, preferably with doors. The best are considered universal designs with the ability to adjust the length. Plus, it is equipped with removable legs, which makes it convenient to make adjustments without spoiling the design of the room.

Self-installation of a purchased screen of such a design is very simple:

• The product is placed on the side of the bathtub, leading into a recess under its edge. It is important here to set the wall strictly vertically.
• The first is to fix the top of the PVC panel with spacer bolts. The legs are installed next. The universal screen has the ability to fix them on the inside or outside of the panel.
• Having once again aligned the product vertically in level, proceed to adjust the height of the legs. After each of them rests against the floor, it is firmly established under the bathroom.

Now it remains to screw the nickel-plated handles to the doors and this work can be considered finished.

Before starting the installation of the screen, it is necessary to carry out measurements and calculations. The height from the side of the bath to the floor, the width of the niche and the height of the screen are measured. After taking measurements, the amount of material and tools required is determined. A diagram of the future structure should be drawn to determine the location of the screen, communications, holes for quick access to engineering networks.

To begin with, the marking of the installation site of the frame (wooden or metal) is carried out. Panels are cut from plastic sheets: front and side. After the frame is fixed, the panels are mounted in the profile grooves.

Many manufacturers have a line of screens that are tiled, foam or plastic faced with a solid frame. You can make the frame yourself from drywall. The profile frame is mounted on vertical posts. This gives the structure strength and stability. The finished U-shaped frame is subsequently sheathed with GVL. It is desirable that the joints coincide with the guides.

How to install a screen under the bathtub? The first thing to do is to strengthen the bath itself. This is especially true for acrylic containers that have a strong deflection when pressed.

Now we begin to assemble the frame. We need materials:

1. Metal profile UD (guide) 60x27 mm. Choose a quality material with a high stiffness factor. Cut the profile into the desired parts. We need: 4 stiffeners - the distance from the floor to the side of the bathroom; 1 PC. - lower horizontal guide; 1 PC. - upper horizontal guide. It is better to double the upper profile for strengthening and fasten it with self-tapping screws. Such reinsurance will not hurt, since the upper part of the frame will be suspended.
2. Moisture resistant gypsum board.
3. Self-tapping screws for metal.
4. Self-tapping screws with a press washer.
5. Dowel-nails.

Tools:

• level;
• tape measure and other measuring devices;
• pencil;
• construction knife;
• screwdriver;
• scissors for metal.

Installation of a screen made of a metal profile and gypsum board is easy to do if you approach this matter with all responsibility. The installed structure does not tolerate haste:

1. Make the markup. Draw a vertical frame level on the walls. To do this, step back 1 cm from the edge of the bathroom and place a mark. From this mark, it is necessary to take into account the thickness of the finishing tile, the thickness of the drywall, the thickness of the guide profile, the thickness of the tile adhesive (approximately 3 mm). Place a second mark. It is this mark that will be the back wall of the guide profile.
2. Align the extreme stiffeners vertically and attach to the wall with dowel-nails.
3. Place a horizontal guide on the floor between the two verticals attached to the wall. Fix it with dowel-nails.
4. At the top, roll the horizontal profile (double).
5. Fix 2 more vertical posts between the horizontals. Use self-tapping screws with a press washer.

The frame is ready. Screw drywall to it with self-tapping screws for metal. Prime the resulting structure well. The tile material can now be laid out. Do not forget to waterproof the joint between the floor and the screen.

The plastic screen under the bath, offered by stores, has a standard set of parts and can be installed in a matter of minutes. Even a schoolboy can handle this work. Factory screens can be blank or with sliding (swing) doors.

Ready-made kit for assembling the screen:

• aluminum or plastic profile (vertical posts and horizontal rails);
• 2 panels with corresponding holes (sliding doors);
• threaded legs for adjusting the height of the frame;
• handles with fasteners;
• plugs on the ends of horizontal guides;
• self-tapping screws.

Installation:

1. Free up enough floor space. Place long profiles parallel to each other.
2. The vertical posts are installed according to the holes in the horizontal rails. Fix the structure with self-tapping screws, but do not tighten them all the way.
3. Insert the sliding doors into the different slots and check their movement. The panels should slide freely.
4. Adjust the vertical profiles in height and tighten the self-tapping screws.
5. Close the ends of the guides with plugs. Fasten the knobs with the screws. The screen is ready for installation.
6. Place the assembled frame under the bath rim and adjust its height using the threaded legs.

If you want to make the screen a design element of the room, then you should think about its design, for example, stick a film with photo printing. Seascapes, flowers, animals - whatever your heart desires.

You can try to design the panel model yourself. For example, a screen made of a PVC window profile is particularly durable and waterproof. The main thing is to find a window manufacturing company that deals with non-standard solutions. This design is simply made for an acrylic bathtub. It can be of different types: deaf or sliding (swing). Plastic with photo printing, plexiglass or mirror are inserted into the openings. You can fantasize endlessly.

Installing a screen under the bath with your own hands is not difficult, but requires certain skills.

Previously, an inconspicuous view under the bathroom was hidden with the help of various curtains or even this space was covered with tiles. Today, there are many different ways to achieve an aesthetic effect by installing a screen under the bath. This procedure can be done by hand.

Despite the fact that the screen under the bath is a fairly simple design, it can perform a number of functions. Firstly, it covers the unsightly view under the bathroom itself, all communications, pipes, siphons. Also, under such a peculiar screen, you can hide household chemicals, rags for cleaning the floor, and other small items from children or pets. In this case, the screen performs not only an aesthetic function, but is also quite practical with a small square of the bathroom.

Varieties

The most popular design options for screens are:

In order to choose one of the options, you first need to provide for all the factors and functional features of the bath itself and the bathroom. If the bathroom is quite spacious, you can purchase a screen with shelves, which is mounted on the front surface with your own hands. In this case, the structure itself must be removable for normal access to all communications.

So, the screen has been selected, all the necessary tools and materials for its installation have been collected - you can safely proceed to the installation process. In order to get a high-quality result, it is necessary to follow exactly the simple algorithm recommended by experts:

If you have chosen a drywall screen, then the frame is made from a metal profile. It is worth remembering that the more complex the screen design is, the more time and effort its installation requires. To install a screen with doors, it is necessary to mount an W-shaped profile on the frame. After that, two panels are cut out so that they slightly overlap each other. These will be the sliding doors. The last step is to insert them into the profile and screw the doors.

How to make an MDF screen

A practical screen can be built from MDF sheets. A simple instruction will help in the implementation of the plan, if you follow the sequence of installation work. As in the previous case, you need to install a wooden frame with a cross-section of beams up to 4 cm. A bar is installed on the wall under the edge of the bathtub using dowels.

All wooden elements are connected with special corners. MDF boards are cut to the required height and length. Also, a hole is made in the front of the screen, which is equipped with doors for quick access to communications. The finished frame is sheathed with MDF panels. Do not forget about the processing of joints with a sealant.

Required tools

Before proceeding with the installation of the screen under the bath, it is necessary to decide on the list of tools necessary for this. If you want to do everything yourself, you will need:

• building level;
• roulette;
• screwdriver;
• screwdriver;
• adjustable wrench;
• UD profile;
• puncher.

You may also need:

• liquid Nails;
• dowels;
• drywall knife;
• screw nails;
• acrylic panels;
• construction stapler;
• metal profile or wooden bars.

If something is missing in your arsenal to install the screen with your own hands, everything you need can be found in hardware stores.

To construct and secure the structure of the screen under the bath, the following tools will be required:

• roulette;
• screwdriver;
• screwdriver;
• building level.

Laying the screen out of bricks

This option is pretty simple. A brick wall is erected along the border of the bath or from wall to wall, near which the bath is located, the thickness of which is half a brick. Brick, as for the construction of an ordinary wall, must be altered, that is, each subsequent rad is shifted to half a brick. In the place that is convenient for access to the drain, a window is formed. To cover it, a door is purchased or made and attached to awnings.

Despite the fact that the wall of bricks is quite strong, one way or another, it is not recommended to lean the bath on it, since it is necessary to leave a gap between the edge of the bath and the last brick row of 1-2 centimeters, which is blown out with polyurethane foam. Brickwork is clad with ceramic tiles or other suitable finishing materials that match the bathroom design.

MDF screen sheathing

The process of installing a MDF screen is identical to plasterboard bathtub cladding. the only difference is that it is necessary to additionally make ventilation slots in the screen on the side opposite from the technological opening. For this, a slot is made 5-10 centimeters long and 2-3 centimeters wide, which is covered with a plastic lattice. MDF sheets must be primed on all sides even before they are fixed on the frame.

Conclusion

As you can see from the above, it is very possible to install a screen under the bath on your own without spending a lot of time and effort. Installing the screen with your own hands will help you save a lot on plumbers' services, and will also pleasantly raise the self-esteem of the master who did the work with his own hands.

Based on the above material, we can conclude that from the listed options, only the use of plastic will make it possible to make a screen for a bathtub, which can be quickly dismantled if necessary, and then assembled back. At the same time, other methods make it possible to use significantly more cladding materials to combine the appearance of the bathtub with the overall design of the bathroom.

Despite the fact that self-installation of a bath screen takes relatively longer than if you install a purchased ready-made screen, however, and the result will be more acceptable and reliable, moreover, this option saves a lot on the cost of plumbing services.