The height of the bathtub from the floor is standard standards and permissible deviations for installation. Height of the bath from the floor: norms and permissible deviations Standard height of the acrylic bath from the floor

Convenience in the bathroom is an important component for a comfortable stay in a private house or apartment. All items must be located so that they have free access. For the convenience of further use, it is important not only to choose a high-quality bath, but also to make a competent installation at the desired height.

Standards and norms

The correct height of the bath ensures safety, ease of use, and comfort during water procedures. It is easy to climb into it, if necessary, you can bathe children, use for other household needs.

The SNiP (Building Norms and Rules) prescribes the basic requirements for the location of the bath:

the height from the floor with legs should be 60 cm. Installing the product at this height allows you to safely get into the bathtub and easily get out of it;
the minimum height from the floor to the bottom of the bath should be 15 cm. This distance allows you to easily install and connect the siphon;
if the bathtub is placed loosely against the wall, then the distance from it to the wall is at least 70 cm. Then a person will be able to freely approach the bathing place.

You need to install a plumbing product horizontally, without a slope (it is provided by the manufacturer). The position should be stable so that the bathtub does not stagger or tilt to one side.

Possible deviations from the norm

It is no coincidence that the height of the bathtub from the floor, taking into account the legs, was chosen equal to 60 cm. It is calculated by calculation and is aimed at a person of average height. But for the optimal position of the product during installation, it is necessary to focus on individual indicators.

Note! If family members are short and there are children, the installation height may be reduced. Tall people can increase the distance a little.

The residence of elderly or disabled family members is also the reason for the reduction of the standard indicator to 50 cm. This will make it possible to simplify hygiene procedures and make them safe for these categories.

Given that there are a huge number of different models, the depth of the bowl is always taken into account. The bathtub will have to be raised 5 cm if there is not enough space for the siphon. At the same time, the maximum level of the location of the sides above the floor level should not exceed 65 cm. When placed on the podium, you will have to make a step.

Bath installation options

There are three main installation methods:

using a frame;
on legs;
on the podium.

A metal frame is needed for acrylic baths, sometimes steel. The frame is made of metal, it allows you to select the desired height, reliably strengthen the entire structure, and prevent the walls from being pushed through.

Cast iron or steel baths are installed using the legs. The legs are adjustable in height or solid. The construction, located on legs, has a height of 15–20 cm from bowl to floor.

Individual models are installed on a podium made of bricks, blocks or concrete. This protects the bath from deformation, makes the structure as stable as possible. With this installation method, the height can be any.

Types of baths, their installation

The modern market offers a wide selection of bathtubs from a variety of materials. The most common are steel, acrylic and cast iron products. Each model is mounted differently.

The cast iron bathtub is durable and will last a long time. It has a lot of weight, so you need to decide on the installation height before starting work. After installation, it will be quite difficult to adjust the position. This model has legs that are fixed to the body, often of exquisite shape, engraving or pattern. A cast iron bathtub with designer legs will decorate the room. It should be placed at some distance from the wall or, if space permits, in the middle. The main feature of such a bath is that it retains heat well. An excellent choice for those who like to bask in the water for a long time.

The surface on which the cast iron bath is placed must support a lot of weight and be flat. If the floor is not very hard, metal spacers should be placed under the feet. If the product will stand on a slippery surface, it is necessary to fix the supports with special waterproof glue.

The steel bath is lighter than the cast iron bath. Looks good, but does not stay warm for long. When installing, it must be connected to the wall. The surest and safest way of fastening is with supports, which have self-adhesive pads. They securely fix the body in the desired position. Short legs with adjustment bolts are also reliable. Often the front edge of the bath is covered with a decorative screen.

An acrylic bath is the most modern option. Its advantages are low weight, the ability to create an original design, and ease of installation. The acrylic material is warm and retains temperature for a long time. Acrylic bathtubs are often equipped with a metal frame. It has legs, which allows you to adjust the height of the product.

Corner acrylic baths are convenient to use. When installing them, you need to carefully approach the joining of the edges of the product with the wall. They use silicone, curb strips or plastic skirting boards. The rest of the installation is no different from other models.

Bath height from floor - standard and installation tolerances

A bath is the central element of every bathroom, without which it is impossible to imagine living in a modern, comfortable house. Fortunately, home improvement stores offer a wide range of plumbing fixtures to suit every taste or budget, from cast iron, steel to acrylic.

To ensure the convenience of using the washing container, it is important not only to choose a high-quality container, but also to install it correctly. In this article we will tell you what the height of the bathtub from the floor should be according to generally accepted building codes.

Standards, norms

The height of the bathroom from the floor is an important factor responsible for the safety and usability of this plumbing fixture, which is not affected by its size or shape. This figure is made up of the depth of the bowl, which for different models is 50-65 cm and the height of the supports used for installation. The installation height of the tank is strictly regulated by building codes:

Note! The standard installation height of the wash tank as stated in building codes is a guideline. In children's or health care institutions, this figure is reduced to 50 cm in order to increase the comfort of hygiene procedures.

Tolerances

The recommended installation height of the bathtub of 60 cm is based on the average height of the person and the standard bowl depth. However, when installing plumbing equipment, you need to approach this indicator individually, taking into account the wishes of the homeowners, as well as the size of the product. The permissible range of the height to which the bathtub is raised above the floor is 50-70 cm.

The optimal distance from the edge of the bowl to the floor depends on the following factors:

Average human height. The smaller the height of the person who uses the bathroom, the lower it should be installed. You need to understand that with a height of 150 cm, raising a leg above 70 cm is problematic, and besides, it is unsafe. It is more convenient for a tall person to use a bathtub set at a level of 65-70 cm, since there is no need to bend low to it.
Living in an apartment for children and elderly family members. If the bathroom is used by children, elderly relatives or people with limited mobility, it is recommended to install the bath no higher than 50 cm in order to simplify and secure hygiene procedures.
Depth of plumbing equipment. If the depth of the bowl is 50 cm, then the minimum level at which the bathtub can be installed is 65 cm, since 15 cm is required to connect the siphon.
Bowl size and weight. The installation height is influenced by the size and weight of the plumbing fixtures. Cast iron models have a significant weight of 100-150 kg, so they are not installed closer to the floor surface.

Important! To determine to what height to raise the washing container during installation, you need to put the entrusted legs under it and try to climb into it. In this case, it is better to take into account the growth of the lowest family member or calculate the average.

Installation methods

When deciding what should be the height of the bath from the floor, keep in mind that the minimum distance for installing the siphon is 15 cm.To use this plumbing fixture was not traumatic and uncomfortable, you can adjust this indicator during installation. Installation of plumbing equipment is carried out by the following methods:

With a frame. With the help of a metal support frame, steel and acrylic models are most often installed, which have thin walls and can be deformed. Whatever the shape and size of the bowl, with the help of such a structure it can be raised to any height, securely fixed. Installation with a frame
With the help of the legs. A standard cast iron or steel bathtub is mounted on legs that can be of adjustable or non-adjustable length. As a rule, with the help of these supports it is impossible to raise the bowl higher than 15-20 cm. Installing the bath on legs
Using the podium. To prevent deformation, as well as to increase the stability of the bowl, I install some models on a podium made of bricks or blocks. Using this method, you can raise the bath to any height multiple of the height of one brick. Installation with a podium

Experienced craftsmen say that it is most convenient to determine the optimal distance from the floor to the bottom of the bath using sliding legs with screws. These supports are fixed to the bottom of the bath and then adjusted in height so that getting in and out of the bath is straightforward. Accurate determination of the height of the bath allows you to reduce the risk of injury during hygiene procedures, as well as to ensure maximum comfort.

Video instruction

Installing a bathtub in an apartment is very important. It has some nuances. One of them is the height of the bath from the floor. Another is the location of this structure indoors. Comfort when using this plumbing structure largely depends on these subtleties.

Bath installation standards and guidelines

Plumbing factories manufacture their products in accordance with the requirements of research centers responsible for the correct and safe installation of equipment. Before purchasing and installing a bath, you must at least briefly familiarize yourself with some of the parameters laid down in SNiP (building codes and regulations). SNiP require the installation of the bathtub at an average height of 60 cm from the floor. This is the height to which it is convenient to lift a leg for a person. If the height of the bath from the floor is higher than this distance, it can lead to further discomfort in the future. Getting in and out of the bathtub will become simply dangerous. Manufacturers include precisely this height in their products.

Domestic models have dimensions of 150 × 70 cm, most imported models fit into the size of 180 × 80 cm. But almost all of them are equipped with legs. The legs have a resource that makes it possible to install the bathtub from the floor at a distance of 60 cm to the upper edge of the side.

in the center of the room;
close to the walls.

In the vast majority of apartments, the bath is near the wall. This is due to the size of the room. Usually the emphasis is on 3 walls. This is a very correct move. Even if a person slips, he can hold onto the walls and not fall. In a private house with a large area or in an apartment with a large size, it is possible to install equipment in the middle of the room. But in this case, the height of the bath with legs from the floor to the top of the rim should be about 60 cm. There should be a gap of at least 1 m to the nearest wall.This will make it possible to go around the bath and enter it from either side.

Popular models

There are hundreds of models on the market. They are all made from different materials and have completely different shapes. The most popular in our time are:

enameled steel;
cast iron;
acrylic.

These structures have their own characteristics, and their installation is somewhat different. Steel products are quite lightweight, look very elegant and fit into almost any bathroom setting. These products are equipped with adjustable feet. In this case, the standard height of the bathroom from the floor may vary slightly in one direction or another. However, they do not provide full stability, so it is not recommended to use them in the center of the room. The best place for them is between the walls.

The cast iron bath is the heaviest. It keeps the water poured into it for several hours. Installation of the product requires considerable physical effort. Installation is carried out using cast iron supports, which are usually rigidly attached to the body. This model is very stable, it can be installed anywhere in the apartment. The installation height of the bath is not adjustable. If there is a need to raise it, you will have to substitute wooden or other pads under the support legs.

The most attractive and luxurious option is the acrylic model. This unique plumbing fits perfectly into the design of the room. The acrylic model can be restored with a special mixture. As a result of restoration, all abrasions, roughness and scratches disappear from the surface of the product. The acrylic version is lightweight and unstable, therefore it is recommended to install it only in the bathroom. Standard legs and supports do not have adjusting devices.

If the bathtub is not installed at home, but in a hospital or kindergarten, what height is allowed there? There are various deviations in building codes and regulations. They indicate the height of the bath in health-improving and children's institutions, equal to 50 cm. But deviations from this figure are allowed in both directions. Each owner sets his own height for himself to achieve comfort and get the most out of the bathroom.

For a more comfortable use of the bathroom, you can build a kind of podium for it. It is necessary to prepare:

jigsaw;
drill;
hammer;
building level;
plywood;
fixing screws;
metal corners;
timber from wood.

To build a podium, you need to use a level to outline the upper edge of the bath and the podium itself. Next, a sheet of plywood is laid on the floor and firmly attached to it with dowels or nails. The frame is assembled from the bars. It is fastened with screws and corners. Supports can be made from pieces of wood or from blocks with cement mortar. The entire structure is finished with waterproof plasterboard or plywood. You can decorate it in different ways.

Instead of a conclusion on the topic

Installing a bathtub in a house or apartment is a responsible business. It should bring comfort and convenience to the family. To do this, you need to maintain its height from the floor. This is due to the safety of using it. The recommended height is 60 cm. It does not depend on the shape and model of the product. Whirlpool, standard cast iron, light steel or acrylic models have the same height. It can only be adjusted with a special device that some models of products are equipped with. When installing the product against a wall or in the middle of a room, the height requirement does not change. You just need to enter and exit the bath several times to determine the optimal height for yourself. It can range from 50 to 70 cm.

At what height from the floor and how is the bath installed?

Convenience of a bathroom is an important component of a comfortable stay in a particular room. In order to be able to shower, wash or do any other procedure in the shower or toilet, it is important to have free access to everything you need. If the shower room has sufficient dimensions, it will be much more convenient to install the bathtub so that you can take various options for water procedures. When buying this product, you need to clearly know how to install it and at what height from the floor it should be for ease of installation, cleaning the sewer, and of course, use.

Features and norms

In the process of repairing a bathroom or simply replacing the bath itself, it is necessary not only to choose the right container for taking water procedures, but also to install it in accordance with the norms. The convenience of using it depends on the size of the bathroom. It should be deep enough to hold water in itself, preventing it from splashing around the room, but at the same time comfortable for an adult child or elderly person to climb into it.

Regardless of what kind of bathtub will stand in the room, it is important to put it at the right height, which is regulated by the norms:

The standard height from the floor is 60 cm. This distance from the floor to the upper edge of the bath allows you to freely get in and out of the bathing place quite easily.
The distance of the bath from the walls in the room should be at least 70 cm so that you can freely approach the bathing area and use it for specific needs.
The standard height of the bath bottom from the floor should be at least 15 cm. This indicator should be stable despite the variety of types of structures.
This product must be installed evenly, without slopes, because it is provided by the manufacturer himself and is directed to the drain.

The height of the bath can be changed when it comes to a childcare facility, where the equipment is originally intended for use by children who are shorter than adults.

Average height of people living in the room. Thus, the height can either drop to 50 cm if the family is not tall and there are many children, or rise to 70 cm if several tall adults live in the apartment.
Accounting for the category of people living in the apartment: pensioners, people with disabilities, children, which can also significantly affect the installation height indicators.
Selection of the bathroom itself in depth. If it is relatively deep and equal to 50 cm, then taking into account the rise of 15 cm to install the siphon, the level comes out at 65 cm.
Dimensions and weight of the bathroom. If the material is cast iron, then the installation should be at least 15 cm from the floor, lighter materials may have slight fluctuations.

Thus, taking into account the characteristics of family members and the bathtub itself, which will be installed, it is possible to calculate all the necessary indicators for the correct installation of the equipment and its convenient use.

How to make the right choice?

To purchase a good bath, you need to pay attention to the main indicators of a quality product. Usually, taking bath procedures involves a comfortable position in the bath for a period of time. For the process to be pleasant, a necessary selection criterion should be the ability of the material to keep heat from water for as long as possible. Another criterion for choosing a product will be the service life, because few people want to purchase new plumbing every couple of years.

An average-quality bathtub should last at least 5 years, and a good one will have a very long service life, especially if all the standards of caring for it and preventive actions for its restoration are observed from time to time.

Of course, a good product will cost several times more than a simple one, but in the end it fully pays off, and the comfort and convenience of its use cannot be compared with the cheap options.

If you choose a product by material, then there are the following types:

steel baths;
cast iron;
acrylic.

Each of the options has its own advantages and disadvantages. The most popular is now the acrylic bathtub. It is lightweight, has an attractive appearance, but it needs care, if not observed, it will quickly lose its appearance and it will not be so comfortable to use it. Due to its low weight, such a bathtub is installed on legs or supports, which are included in the kit or purchased individually.

Steel structures have a lower cost, but are much inferior in terms of heat transfer characteristics, as they cool down very quickly. But in terms of installation, working with it is as easy as with acrylic. Cast iron options in this aspect represent a much more difficult situation when you have to work with a lot of weight, which does not always withstand standard legs, therefore, in this case, an additional frame is often built, which also requires extra investments.

The choice of a particular option depends on both financial capabilities and taste preferences. The main thing is to focus on ease of use and ease of maintenance and installation, then the pleasure of purchasing a particular bath will last long enough.

Varieties

When planning the choice of a bath, it is worth deciding first of all on its size, because it plays an important role in optimizing the space of the room. The bathtub should easily enter the room and take up the space allocated for it, while leaving space for the storage system, and maybe for the washing machine. The standard size is 180 by 80 cm, but often the dimensions of shower rooms do not allow accommodating a full-length structure.

Based on the requirements of the premises, manufacturers began to produce smaller designs of bathtubs, ranging from the smallest, where the bathtub length is 120, and the width can vary: 70/75/80, and ending with a full-size version. The most popular size for apartments is 170x70, where it is supposed to allocate more space in the room due to the size of the bathroom. If the room is very small and it is difficult to place something large in it, then the 150x70 product will perfectly fit into the interior and will give you the opportunity to take bath procedures, relax and unwind even in such cramped conditions.

Having decided on the size of the bath, be it a full-length one of 180, an average of 170 or a small 150 cm, you need to start choosing the material from which the container for water procedures will be made. It is important to understand that if a metal bathing container is bought, then it can be installed both on the legs and make a podium. Low options that come with legs initially do not have to be installed, you can choose any others so that the structure is stronger and more reliable. Not all products are initially equipped with legs, therefore it is possible to choose the type of installation based on the material of the bathroom and the tasks that the space under it can perform.

The steel bathtub is of the type that is best closed and filled in the space underneath, which will make its use much more pleasant. Not only the installation depends on the material, but also the characteristics that the buyer receives, therefore it is important to understand the differences between each type of product.

Materials

The most popular option for bathtubs was once cast iron - strong, reliable, good at keeping heat, but too heavy and requiring certain skills to install. Their competitor was a steel bathtub, which is much lighter, which makes it much more convenient to transport and lift it to the floor. The installation of such bathtubs is also quite growth, although there are some nuances. If you install a bathtub on legs, it will be very noisy and will quickly give off heat from the water that has been taken into it. But this nuance can be corrected by closing the space under the bathroom with foam, mineral wool or polyurethane foam, and closing it all with additional walls.

The advantage of the steel bath is the versatility of this product. Some options may have handles for ease of use, a built-in hydromassage system that allows you to fully relax. The coating of such bathtubs can be different - it is enamel and polymer coating, which is used more often. But the most popular today is the acrylic bathtub. It is very lightweight, does not present any problems in installation, and with proper care it can last up to ten years.

These products keep warm well, are not noisy, have a very beautiful appearance that you can maintain on your own.

A new type of bath material is kvaril, which is a mixture of acrylic and quartz. Such products withstand heavy loads, are not afraid of shocks, do not create noise during use, and keep the water temperature well. By weight, these bathtubs are heavier than acrylic, but lighter than cast iron. Most of the products are equipped with the functions of hydromassage, air massage, armrests and headrests for ease of use.

It is especially worth highlighting ceramic baths, which are of high cost, therefore not everyone can afford them. Such products perfectly and for a long time keep heat from water, are absolutely not noisy, do not rust, they are not afraid of mechanical damage. They also have a long service life, but they are very inconvenient to transport due to their heavy weight and the risk of breaking an exclusive product. Ceramic products of this type can be made from both natural stone, such as marble, and artificial.

Configuration

The use of various materials to create a bath did not become the limit, and very soon, in addition to simple rectangular designs, new, more interesting and unconventional ones began to appear. An ordinary bath can differ only in size from a small one, in which you can take water procedures in a sitting position, to a full-size one, where there is a place to lie down and fully relax. A new word in the design of such products was the appearance of corner structures. They seem very large, but in fact, it is this option that helps to properly distribute the bathroom space and fill it with everything you need.

If we consider the angular configuration in more detail, then it is worth highlighting its options:

right-handed and left-handed designs;
symmetrical and asymmetrical.

The main material for them is acrylic or steel, but artificial stone can also be used. The functional component of these structures is wider than that of simple bathtubs, because it has a built-in hydromassage and, if necessary, is completed with other useful functions. Symmetrical products can measure 120 by 120 and reach dimensions of 180 by 180 cm, and asymmetric ones vary from 120 by 60 to 190 by 170. The choice of size depends on the dimensions of the bathroom.

In addition to this option, there are also oval designs that look graceful and have soft and pleasant outlines. In addition to visual beauty, this option is very convenient to use and allows you to fully relax. For a more complete effect, hydro and air massage is often built in, but not equipped with armrests and headrests. The sizes of such baths can be very diverse, but the most standard is 210 by 140 cm.

The appearance of new, more rounded shapes gave impetus to the emergence of an even more perfect design in the form of a round bath. This option is suitable for use by two or more people at the same time, depending on the size and configuration. It is in this case that the presence of hydromassage functions gives the maximum result, allowing you to truly relax.

Such a design is installed in the middle of the room so that you can immerse yourself from either side, which, in turn, requires a large bathroom area.

The diameter of this type of bathtub can start from 140 cm and go up to 210 cm.Most often, acrylic is used as a material for manufacturing, but sometimes you can also find steel structures. To obtain an exclusive product, you can order a bathtub made of quaril, natural or artificial stone. The variety of shapes and sizes is striking, therefore it is necessary to soberly assess the needs, which will allow not to make a mistake and buy exactly what is needed for the specific conditions and people who will use the bathroom.

When buying a bathtub, the first thing to think about is its installation in a designated room. The choice of installation option will depend on a number of factors - this is the material of the bath, its dimensions and the design features of the room itself.

There are three main options for installation types.

Using a frame to install a bath in it. This option is best suited for acrylic and steel bathtubs, which can deform under heavy loads. The frame makes it possible to choose the optimal height of the product relative to the floor, reliably fixes the structure, creating the most comfortable conditions for taking water procedures.
Installing the bath on legs. Most often this option is used for cast iron and steel products. The legs can be height adjustable and solid, monolithic. The structure, placed on legs, does not exceed 20 cm in height from the floor.
Installing the bath on the podium. This option makes it possible to protect the product from deformations of any plan, helps to make the entire structure more stable. If bricks or blocks are used as the material for the podium, then the height of the finished structure can be any. In addition, this option minimizes heat loss even in the coldest baths.

The bathroom should be a place where any family member can shower or lie in the tub and relax, and for this it is important to create all the conditions. The height of the bathtub should not be inconvenient or difficult for any family member to get in or out of.

It is important to choose the installation option for the bath initially in order to purchase everything you need. This is especially important in the case of cast iron structures, which are heavy, because it is very difficult to work with them. Often, such products are equipped with ready-made legs that cannot be adjusted in any way, you can only use the materials at hand that level the floor area to the desired level so that the structure is stable and even.

Acrylic and steel bathtubs do not have such a large mass, therefore it is easier to work with them. In these cases, you can use the legs with the ability to adjust the height of the product. Having correctly aligned all sides and choosing the optimal height for taking a bath, after the installation is completed, you can proceed to approbation of the new design.

If the floors in the bathroom are very uneven, then they must be leveled before installing new plumbing. It is advisable not to greatly overestimate the level so that it is not higher than the corridor, otherwise any moisture will immediately flow into it. In this case, curbs are built that impede this process, however, the floor height in both rooms should be approximately equal.

Only on a flat floor can you start installing a new bathroom, which will be easier and faster, because you don't have to spend a lot of time leveling the product and adjusting its height.

When installing a bathtub, it is important to set it clearly horizontally, for which a level is used, which is used to check the side in contact with the wall. The angle of the board and wall should be 90 degrees.

The height of the bathtub from the floor depends on the type of installation, the main thing is not to plant it lower than 15 cm, which will complicate the installation of the siphon. When choosing legs for the finished product, it is worth considering the interior of the room, which will help you make the right choice.

If the weight of the bathroom is large, and the floor on which it is installed does not have a solid foundation, then it is necessary to put metal inserts under each leg, which will hold the entire structure.

If a child lives in the apartment, then for the convenience of using the bathroom, you can find special furniture, where there is a step that makes it possible to reach the mirror and the tap. The advantage of such a ledge is that it can be pulled out when needed, and hidden when it is no longer needed. If there is no room in the bathroom to install additional bedside tables, then you can make an additional small washbasin to the sink, which is located near the bathing tank, and place it at the optimal height for the child.

As for the bath itself, small seating structures are more suitable for the elderly and children, while everyone else will be comfortable in a large and deep bath so that bathing is not only a hygienic procedure, but also a pleasure.

For the height options for installing the bath, see the following video.

Bathroom standard sizes - characteristics of acrylic, cast iron and steel models

The bath is the central element of the bathroom design, from which the interior of the rest of the room plays. The style and design of the bathroom depends on the shape, size, material from which it is made, the color of this element.

Since bathrooms in apartments and private residential buildings differ greatly in area, manufacturers produce washing containers of different lengths, widths, depths, suitable for a spacious room or a three-meter room. The convenience of use and the quality of installation of this product depend on the correct choice of shape and dimensions. In this article we will tell you what are the sizes of cast iron, steel and acrylic bathtubs to make it easier for you to choose.

Criterias of choice

The dimensions of the standard bathtub are values \u200b\u200bthat indicate the length, width, depth of the product. For the convenience of buyers, the size range of cast iron, steel and acrylic containers for washing is standardized, however, there are models with atypical sizes. The dimensions of the bath depend on the shape of the product; they are developed taking into account the average physique of an adult. It is believed that for comfortable use, the width of the product intended for taking hygiene procedures should be at least 60-85 cm, depth 60-65 cm, and length 150-180 cm.

Standard bath sizes

When choosing a bathroom size, consider the following factors:

The dimensions and shape of the model are selected in accordance with the area of \u200b\u200bthe bathroom. The solid size of the corner bath does not allow using this option in small-sized rooms. After placing in the bathroom a container for washing, the necessary plumbing fixtures, furniture and household appliances, there should be room in it for comfortable movement of a person.
When choosing, take into account that the volume of a standard acrylic, cast-iron or steel bath with the same dimensions can differ significantly, since this parameter is influenced by the shape of the model, the angle of inclination of the walls.
For safe operation, baths with a depth of up to 60 cm are chosen so that when immersed in water, a person's head remains above the liquid level. This size is also suitable for entering and exiting the container.
The width of the model is selected in accordance with the complexion of the people using it so that a few cm remain from the bath wall to the user's shoulder when immersed.

Note! So that the bath does not sway after installation, does not play or wobble, it is necessary to accurately select the size of the model. If the installation of the tank is carried out from wall to wall, then the length of the product should correspond to this distance minus 3-5 cm. It is desirable that the gaps between the wall and the edges of the bath be minimal, since it is quite problematic to waterproof these places.

Cast iron products

Cast iron baths, despite the weight of 100-150 kg, are in demand among buyers due to their excellent performance and affordable price. This material has high strength, wear resistance and low thermal conductivity, due to which it retains heat perfectly during use. Cast iron is considered a material that is difficult and difficult to process, therefore, the standard sizes of baths from it are limited to 3 categories:

Note! Some manufacturers offer non-standard dimensions of a cast iron bathroom - 70x170 cm or 70x180 cm.When buying these models, it should be borne in mind that not every room will accommodate a container of such dimensions. In addition, the weight of large-sized cast iron models exceeds 150 kg, which causes inconvenience during transportation and installation.

Steel products

Compared to other materials from which bathtubs are usually made, steel stands out for its affordable price and high wear resistance. It must be admitted that it retains heat worse than cast iron, but it weighs 3 times less, which greatly simplifies the transportation and installation of this product. A steel bathtub is stronger than acrylic, however, manufacturers do not advise sitting on the sides of such models, as they can deform. When buying, take into account that steel has a high resonating ability, and therefore a set of water creates a lot of noise.

Steel bath

The dimensions of a standard steel bath are:

The length of the steel bath, according to the standard, can be 150-180 cm. The longer the model, the more comfortable it is.
The width of steel models is 70-85 cm.
The depth of steel products is 65 cm.

Important! The steel used for the manufacture of bathtubs has a higher ductility than cast iron, so this metal is easier and more convenient to process. Therefore, the range of steel products is wider and more varied, it contains oval, rectangular, round and angular baths.

Acrylic products

Recently, the popularity of acrylic products has increased, baths from this material are distinguished by a beautiful glossy shine, impeccable whiteness, low heat transfer coefficient and a variety of colors. Not least among the advantages of these models is the abundance of different shapes and sizes offered by manufacturers. The size range of acrylic products is very flexible, it does not obey the standard. The length and width of acrylic bathtubs is difficult to determine, as they often have a rounded, curved shape.

Acrylic bathtub

When choosing such products, consider the following factors:

The length of the bathtub of the standard model made of acrylic is 120-190 cm, and the width is 70-170 cm. Due to the depth of 65 cm and the steeper angle of the product's walls, the volume of the container is larger than that of the models made of cast iron and steel.
The main factor in the comfort of acrylic models is academic. The most comfortable bathtubs are made taking into account the shape of the human body, they are equipped with built-in headrests, handrails, a corrugated bottom surface to increase comfort during use.

Currently, there is a huge number of very diverse options for shelves in the hallway, and this is directly ...

Floor insulation in a wooden house from below: materials and installation technology SHARE ON SOCIAL NETWORKS One of the most common ...

Considering that the total height of the bath with legs from the floor according to the standard should be no more than 70 centimeters, this standard is recommended in order to ensure safety during use.

Sometimes the choice in size is so limited that you have to purchase a sitz bath, in which case the depth of the font can reach 70 centimeters, and the height increases accordingly to the upper edge. In this case, a handle is installed on the wall to ensure safety.

How to install, assemble and connect - instructions

Repair in a bathroom with replacement of plumbing always requires an answer to the question - what, where and how to attach it. First of all, it is necessary to solve the issues of rational water supply and sewage.

Such external treatment of the body of the font significantly increases its heat resistance and reduces the level of noise during filling.

The weakness of the body of such a vessel from deformations during filling and use also deserves attention and additional refinement. It is practiced to install such containers on an additional brick foundation, which compensates for the load on the bottom.

In this case, the height of the bathroom 170 x 70 from the floor is standard and is 70 centimeters.

Installation instructions

Watch the video

Installing a bath is a critical operation that is best left to a specialist or performed independently under his guidance. In this case, you must adhere to the following rules:

In accordance with the requirements of SNiP, the bath must be installed on a perfectly flat horizontal surface. The load-bearing characteristics of the floor finishing material must correspond to the weight characteristics of the font plus the mass of the water being poured. In particular, for cast iron vessels, it is better to use porcelain stoneware tiles.
For the safety of the bath during installation, its installation is carried out last, when the main finishing work has already been completed.
It is necessary to determine in advance its location, including the design of the support device. The mounting method is taken into account - on a foundation, a metal frame or directly on standard legs.
In some cases, when using a metal bath, the standard legs do not provide performance. In the place where the legs rest on the bottom, enamel may crack and peel off over time. Therefore, housings made of thin metal sheet must be installed on a special cradle, which increases the support area.
The standard of the bath height from the floor is certainly maintained.

Features of mounting acrylic products

The use of an acrylic bath has its own characteristics. A body made of this material can deform quite significantly when filled with water and taking procedures.

Therefore, such products are installed with support on a specially made metal frame. The load-sensing points are positioned in such a way as to support the hot tub not only through the bottom, but also the upper flanges.

However, the most popular way to install the bathtub is to mount it on a brick foundation. Moreover, the masonry is carried out in such a way that the height of the acrylic bathtub from the floor corresponds to the standard and is no more than 70 centimeters. Deviation is acceptable, but only in the direction of decreasing this indicator.

The support base for the acrylic bathtub is formed with the subsequent consideration of the decorative finish.

Let's talk a little about the structure and operation of the jacuzzi

The days when the presence of a jacuzzi in the house was a sign of the owner's wealth is not so far off. Today, such a hot tub is available in many homes and is a must, allowing you to relax and rejuvenate after a hard day at work.

Watch the video

But acquiring such a device is only the first and not the most difficult step. The main thing is to install it correctly. Naturally, you can invite an experienced specialist, but having studied the procedure in detail, you can cope with this task yourself.

The hydraulic massage bath consists of the following main elements:

a bowl-shaped vessel, also called a font;
hole for water intake;
nozzles for ejection of water jets and air;
piping of the hydromassage system and aeration network;
pumping station for pumping liquid through the hydromassage system;
compressor for intake and pumping of air in the aeration system;
drain holes for transferring waste to the sewer system;
adjustment and control unit;
support system with regulators for mounting;
a mixing device for adjusting the water temperature while filling the hot tub;
remote Control.

The principle of operation of the device with hydromassage is simple - the bath is filled with water of the required temperature through the mixer, while part of the liquid enters the piping of the hydromassage system.

The pump creates pressure, and the liquid escapes from the nozzles at high speed, exerting a massaging effect on the human body.

In addition to this effect, you can turn on the aerator, and get an additional effect of air in the form of a clean stream or mixed with water. The whole process is controlled by pneumatic or electronic system.

Modern hydromassage installations are equipped with additional functions designed for various purposes - music playback, radio, television, as well as the creation of color effects. Air aromatization, ozonation and other options are possible.

Features of installation of baths of any design

Regardless of the material of manufacture, shape and size of the font, during installation there are a number of general rules that must be followed:

The legs are installed on the bathtub in such a position that the siphon freely, without distortions, enters the drainage pipe outlet. Before inserting it, you need to apply silicone sealant to the pipe.
During installation, it is necessary to control the presence of a proper slope of the bottom towards the drain hole. In this case, the upper edge should be parallel to the floor. The slope is provided by the design of the vessel.
When placing the font against the wall, reliable sealing of the joints is required. It is ensured by sealing the gaps with cement mortar and laying a border from ceramic corners. The outer seam must be painted over with moisture-resistant acrylic paint.
Large gaps are filled with bricks or closed with any suitable sheet material, followed by finishing with decorative materials.
The bath must be equipped with grounding. It is done with a thick copper wire or busbar. The use of a steel strip is acceptable.
When using a bath with hydromassage, it is necessary to lay additional communications from the electricity and water supply system. Even at the stage of choosing such a device, it should be taken into account that for its normal operation, a water pressure in the network of about 4.5-6 atmospheres is required. If this condition is not met, you will have to attend to the purchase and use.

Watch the video

Special care should be taken to seal the drain hole in the floor and the joints on the sewer pipes.

Great design and expensive finishes do not yet make the bathroom a model of comfort. This is, first of all, a room with a mass of useful objects, it is their size and correctly selected standards that help to feel, as they say, at ease. Buying attributes and plumbing, you have to look for your own version of the height of the sink in the bathroom from the floor. This is a really serious problem. We have to sort out the real length, width, ways of fixing furniture and even the standard of the bathroom height from the floor. Because we are all different, and this is the main problem, even for the manufacturer of bathroom items.

Most important bathroom heights

Each manufacturer has its own approach to the size range of products, which is quite understandable. The industrial production of sinks and baths cannot cover all size ranges and standards, therefore, when determining the height, length and width of the bathroom, they are guided by the parameters of the average user. Using statistics to derive the most convenient dimensions allows designers to calculate a standard for bathroom installation height from the floor in such a way as to maximize sales.

In order to comfortably use the bathroom, the average user needs to choose the right three basic sizes:

Bath bowl depth;
The vertical dimension from the floor to the top edge of the bath rim;
The height of the sink above the floor.

It is easy to see that the main problem is related to human growth.

Important! The place of attachment of the sink can be safely ranked among the most important parameters for installing plumbing. As a rule, in the family, in addition to children, there are both tall and low members, so you have to select options for placing the sink or look for a fundamentally different solution for fastening.

In addition, the fastening of the sink, like the bath, is largely determined by the design of the bellows and the organization of the drain of the sewer pipes. The best option is a scheme when the bellows with an outlet is suspended from the drain hole along a loose fit, and the pipes run along the wall to the point of connection to the riser.

In this case, technically, the washbasin can be fixed at any height, as long as the standard of the drain slope is maintained. Even if the option of placing a new sink six months or a year after installation has ceased to satisfy the majority of residents, you can easily fix the situation. To do this, you will need to raise the sink mount to the bathroom wall to a more comfortable height and replace the bellows drain pipe with a longer one. If the sink is made in the form of a "tulip", then you will additionally need to raise the supporting leg of the structure on an improvised stand.

It's another matter if the sink is cantilevered to the wall, and pipes with a bellows are "tied" rigidly to the wall niche. In this case, two sinks with different heights from the floor must be installed in the bathroom.

Sink height standards, what SNiP norms say

Unfortunately, in terms of comfort when installing the sink, the requirements of regulatory documents seem to be at least outdated, since the statistics on the basis of which children and adults were designed with the height of the sink from the floor have aged forty years. During this time, the average height of an adult increased by 10 cm and reached 178 cm for men and 166 cm for women.

Whereas SNiPs No. II-64-80 and No. 3.05.01-85 determine the following standard bathroom height from the floor:

For use by adults - 85 cm;
Children of primary and secondary school age are provided with washbasins with an installation height of 60-75 cm, older students - 60-80 cm;
In preschool institutions, the upper edge of the washbasin is 45-50 cm.

It is clear that educational children's institutions, despite the backwardness of the SNiP requirements, do not experience problems with the height of the washbasin, since children grow up, and schoolchildren themselves choose those devices that are more convenient for them to use.

The situation is a little more complicated with determining the height of the washbasin in the home bathroom. For men, the standard for the height of the sink from the floor in the bathroom is 90-100 cm, while for women this size is 80-85 cm. The difference in comfortable height corresponds to the difference in height. In a home bathroom, the problem can be solved quite simply - set at 85 cm plus an adjustment for the average height of adult family members. This method does not work for children, for them you will have to make stands or podiums.

Old norms create the greatest number of problems for offices and government agencies, where the standard for vertical placement of the washbasin from the floor is laid down by standards and GOSTs. Therefore, you have to resort to a trick: some of the washbasins are mounted according to the standard, some with double fastening, which allows you to move the sink to a more comfortable height after the object is handed over.

The golden mean of bathroom heights

As in the case of sinks, the bathroom cannot be installed in an arbitrary order, first of all, its design will not allow it. The permissible height above the floor, to which a bath of a standard design can be raised, does not exceed 70 cm, these are the technical limitations introduced by the manufacturer for the standard for metal and cast iron baths.

The reasons are pretty obvious:

Ensuring the stability of the metal structure;
Reducing the risk of injury. For the elderly and sick people, the standard height from the floor is even limited to 50 cm instead of the standard 60-70 cm.

For the same reasons, they limit the height of the sides, the most common steel and acrylic baths have a side height of 47-55 cm. Acrylic baths are much easier to manufacture than steel or cast iron baths. Therefore, for people with non-standard height or complexion, acrylic models of increased sizes or non-standard heights are available.

Installation standards for metal baths

In addition, there is a SNiP standard for the height of the bathroom from the floor, today it is 60 cm. It is clear that the recommendations were developed, first of all, for metal models in those days when acrylic baths were not as massive as now. In addition, building codes suggest that a 3 cm sill or podium can be built in the bathroom when installed.

The reason that the rules have chosen such a small installation standard lies in two circumstances:

Imperfect design of steel bath supports. The relatively thin metal body does not provide the necessary rigidity, so anything above 600 mm becomes unstable. If the steel bathtub is installed on the wall without lateral support, then it was extremely unsafe to use it even at a height of 60 cm;
A primitive drain bellows device. The minimum height for installing the bellows is 15 cm, with a wall height of 45-47 cm, 60 cm determined by the rules are obtained.

Again, for safety reasons, the developers of the long-outdated SNiP No. 3.05.01-85 determined that the standard for mixer heights above the bathroom and from the floor should be 20 cm and 80 cm, respectively. This means that if the apartment was built and repaired in accordance with long-outdated building codes, it will be impossible to raise the bathtub to a height of more than 80 cm due to the pipelines and fittings of the mixer.

If the sink is installed next to the bathtub on one mixer, then the height of the latter above the floor level should be 100-110 cm. The height of the taps above the upper plane of the sink is determined at 25 cm.

Another unpleasant moment of the high location of the bath is the backlash that invariably arises between the walls and the support columns of the bath. After three to five years of use, the enamel was erased due to friction, and the process of corrosion of ferrous metal began. Therefore, when installing steel bathtubs, all sorts of tricks and tricks were used to make the structure high and at the same time stable.

How to set the bathtub at a comfortable height

The first practical solution was to use screw feet to fix the bathtub to the floor. Regardless of how flat the bathroom floor was, adjusting the feet made it possible to distribute the weight evenly across all four points. The second plus was the ability to adjust the height of the bath. You could buy a standard model with dimensions 180x45x50 and put it at the most comfortable height from the floor.

With an increase in average height by 10 cm, for most people, the height of the bath from the floor at 60 cm has become uncomfortable, today manufacturers produce modern bathtubs with walls of 55 cm and 65 cm, which ensures a normal fit for a person with a height of 170-175 cm.

The simplest way is to refuse to use standard fastening on steel supports. They are quite convenient when it comes to temporary installation of the bath, but they do not delight the owners if they have to use it for several years. Instead of stamped steel legs, the bowl is mounted on masonry racks, as is done under a cast-iron bath. In this case, the size above the floor level can be chosen completely arbitrarily, up to a meter or more. To make it easier to go up and use the bathroom, they build a podium, sometimes even of two steps, for the convenience of people of different heights.

The problems of installing and using a steel bathtub are not limited to adjusting the height, even if the bathtub bowl is installed close to the wall, this will not provide the necessary rigidity of the structure, therefore, for those who want to increase the height of the bowl above the floor level, you have to use the bathroom mount to the wall. This is one of the safest options to secure the tub and make it stiff enough.

There are three ways to install a bath:

Supported on a vertical wall surface through a steel shelf;
Erection of a supporting U-shaped masonry from bricks along the perimeter of the bath;
By assembling a metal frame.

For example, fastening an acrylic bathtub to a wall can be made from a steel profile, which is screwed with dowels to a vertical surface. Due to the stiffness of the walls, the joint between the edge of the bathtub and the wall can be sealed with silicone and a PVC strip. If you just move the bath to the wall, no matter how high the bowl is above the floor, the whole structure will be unstable.

Conclusion

The shape and method of transferring the bath to the wall is largely determined by the size of the room and its configuration. Usually, according to the project, the installation of the bathtub is carried out in a special niche or corner zone, the further the bathtub is located from the connection point of the sewer pipes to the riser, the larger the size of its installation. Already at a distance of 2-2.5 m from the sewer tee, the installation height will be quite large, before fixing the bath to the wall, you will need to assemble a metal frame from a profile pipe.

The bathroom in the home is perhaps the most important. On the one hand, due to the amount of time spent in it.

On the other hand, it is this room that can form an unhealthy microclimate at home due to excess moisture and, accordingly, the appearance and reproduction of pathogens.

Therefore, when starting repairs in a room or even installing a bathtub, you should carefully think over every step.

Bath installation - doesn't it sound simple enough? But no, this is far from an easy job that requires competent calculation and applied installation skills.

In this case, not a single detail should be overlooked, since it is during the installation of the bath that some surprises may occur, which will subsequently bring an unpleasant smell in the room, leaks, fungus and many other "pleasant" surprises.

Therefore, the bath should be entrusted either to a trusted specialist, or to install it yourself. Do not forget about the master's control, even if it was advised by close friends. And if, nevertheless, the decision has come to act independently, you should learn the materiel and cram SNiP.

But you still cannot do without consulting a competent specialist. For an untrained person, it is impossible to take into account absolutely all factors of installation and technical characteristics.

Materials of manufacture and the peculiarity of their application

Today's plumbing market offers an excellent selection of different bathtubs of all shapes and sizes. As a rule, there are three types of products in terms of materials of manufacture: steel, cast iron, acrylic.

Each type requires its own installation features:

Cast iron Is an old classic. Many people still trust only powerful and heavy cast iron tubs, taking into account their durability and monumentalism. In addition, the material retains heat well and is quite easy to clean. Given the massiveness of the bath, it must be installed on strong supports, combined directly with the base of the product. Taking this fact into account, it is necessary to first calculate the required height of the bath in the final version.
Steel plumbing products have also acquired many fans, thanks to their pretty appearance and extreme budget. The disadvantages of such products include instability and minimal thermal insulation. However, they are quite convenient to install. As a rule, height-adjustable legs are used as anchorage. It is always possible to substitute additional materials under them in order to raise the bath higher already during operation. Experts recommend installing a steel bathtub with maximum adherence to the walls, ideally placing it against three walls for maximum stability and safety.
Acrylic - the youngest option of all of the above. They have become widely known and bought for their excellent heat retention, pleasant to the touch material. In addition, the large number of shapes and colors allow acrylic bathtubs to fit into even the most designer bathrooms. Installation is carried out on fasteners at the bottom, therefore it is better to calculate in advance the final height of the product before buying the supports.

However, for each of the three types there are mounts with the possibility of minor adjustment.
When buying a bathtub, you need to pay close attention to the quality of the product. If a cast-iron bathtub can simply quickly lose enamel and, of course, its appearance, then an acrylic bathtub can simply burst under too frequent and heavy loads.

Also, low-quality bathtubs can, when water evaporate, form toxic compounds, the components of which are often included in poor quality enamel.

Why is it important to know the height of the bathroom from the floor: accepted standards

The main indicator is the standard installation height of the bathtub to the floor. In general, the term "standard bath height" refers to the distance from the side of the bath to the floor. It is on it that they rely on during installation to ensure functionality and safety.

Most Soviet-built apartments have very small bathrooms, so the most common position of the bath is near the walls. If you have a spacious bathroom, you can place the bathing container even in the center of the room. Naturally, not forgetting that it is necessary to leave at least a meter of free space for access to the product of the plumbing genius.

Tolerances

Despite the rather categorical statements about the required height of the bath, reality still makes its own adjustments and allows you to adapt the standards as close as possible to each specific situation.

The comfort of its use depends on the height of the sides of the bath.

For example, the average height of a bathtub for medical and childcare facilities is recommended no higher than 50 centimeters.

In theory, the height of the bathroom should be such that it does not cause discomfort for the lowest family member and retirees. To do this, you just need to ask the household member to try to raise the leg over the side, and then the optimal height will be clearly indicated.

How to install the bath correctly?

The height specified by building codes will allow for more economical and aesthetically pleasing arrangement of the tiles in two or three rows, without the need for trimming or unnecessary fragmentation of the material.

In order to perfectly install the bathtub, you must follow the advice of experts:

Place it strictly horizontally, while for maximum accuracy it is better to use a building level.
The angle at which the edge meets the wall must be exactly 90 degrees.
If it is impossible to install the bath in a perfectly horizontal position, you will have to use substrates. For example, you can adjust the position using metal plates. Most often, small pads are taken with a thickness of about five millimeters and sides of 10 centimeters. The use of aluminum plates is unacceptable due to the high softness of the metal.
In order to prevent subsidence of a heavy, for example, cast iron product, the gaskets must be installed on a relatively soft base. Most often in such a situation, wooden blocks with strong wood are used.

For the siphon to function fully, it should be taken into account that the required height of the drain hole in relation to the floor must be at least 15 centimeters. Otherwise, stagnation may occur, and in some cases the inability to use the bath due to the lack of outflow.

When choosing and installing a bath, you should adhere to a not so large list of recommendations for a quality installation. Compliance with state standards during installation will protect you from possible hazards in the operation of the product. Therefore, the installer is required to be attentive, knowledgeable in technology and respect for building legislation.

Well-chosen materials and the bath itself will make the room cozy and safe for all family members.

Watch a video on how to properly install the bath using a laser level:

The key parameter during installation is the height of the tank, which is established on the basis of the SNIP.

What types of baths exist

First of all, to determine the height of the font, you should think about what types of it exist. After all, the type of product is directly related to the size and parameters of a room such as a bathroom.

When choosing a height, all types of bowls must be taken into account.

Steel font

From the economic point of view, this type is the most inexpensive. In addition, such a bowl is lightweight, which does not create problems when transporting goods to the apartment.

The disadvantages of this type include a low degree of noise reduction, as well as the fact that the bowl does not stay warm for long. The steel container is short-lived in use, as it quickly undergoes mechanical damage.

Cast iron products

This type of font material is the classic and most common.

Cast iron sanitary ware is very durable to use. This piece of furniture is very heavy, which means that it is important that the installed product matches the performance characteristics of a multi-storey building.

Acrylic models

These are the best types of font from the point of view of use. They are lightweight compared to the cast iron and steel versions, but retain heat well and can extend their service life up to decades.

Before installing the bath in the room, you should determine in advance how high it will be located above the floor level. The installation height of the bowl in the building codes is advisory in nature.

It can be no more than sixty centimeters, regardless of size and weight, but it can be no more than forty centimeters above the normal level of the sides of the product.

Installation of plumbing from different materials

There are several generally accepted installation rules, which take into account both the facing of floors and walls, and the installation height of the bath from the floor, and permissible deviations during installation, and the features of installing the product in the room.

General installation rules

It is important to place the font on a perfectly flat horizontal surface. To do this, level the floor covering used for the base.
Check the evenness of the surface with a special building level.
Use a corner to measure the angle between the board and the wall, which should be exactly ninety centimeters.
To keep the structure level, it is recommended to put special metal plates in the form of supports. If the bath is installed on a support in the form of a stand, then the presence of metal plates is necessary to firmly hold the bowl on the base.

Do not forget when choosing a model that there should be a place under it for water supply communications and a siphon. For the normal functioning of the communication system, a distance between the bathroom and the floor is required, which is at least fifteen centimeters.

The nuances of installing a cast-iron font

The height of the structure must be calculated well before installing this type of sanitary ware. The preparation of accurate calculations in advance is associated with the high weight of this material, which will prevent further adjustment of the height of the base for the font.

Such a plumbing product should be installed on a solid and even floor covering. If the floor is not strong enough, then metal gaskets are placed under the legs of the cast-iron font.

It is very important to constantly check with the help of the building level the evenness of the installation of the cast-iron model, not only in relation to the walls, but also in relation to the floor covering.

If the floor covering in the room is slippery, such as ceramic tiles, then it is recommended to install the legs with a special polymer adhesive.

Height adjustment of the steel bath

Unlike cast iron, steel can only be installed by firmly fixing it to the wall. Currently, types of steel hot tubs have been developed. The bowl is fixed to the wall using special self-adhesive pads.

When installed, these sides are warmed up with a construction hair dryer, after which the protective coating is removed from them.
How is the height calculated? It is important to measure correctly. Before installing the hot tub, consider the height of the model with legs.

After the steel structure is installed on the base, it is required to straighten it in terms of levelness and height using four wooden wedges. They are driven in between the wall and the side of the font.

The gap between the side and the wall needs to be foamed so that water does not flow behind the font, for example, during the shower. Before foaming, you need to glue the board with paper tape.

Features of mounting an acrylic model

A feature of the acrylic bathtub is that it is installed using a support frame, which can be built on the basis of metal or wooden beams.

The installation process begins with the installation of a support on the bottom of the font, after which the legs are screwed to the frame. In hardware stores, you can purchase legs that are adjustable in height.

Usually the acrylic bowl is placed on the podium, after which its vertical position is adjusted.

After the structure is adjusted, you can attach its sides to the wall covering. This sanitary ware is attached using special hooks or by using building corners.

In cases where there is no metal frame, an acrylic bathtub is installed on a brick base like a podium. If the operational characteristics of the house do not allow installing the base in the form of a podium, then it can be laid under the side of the font in the form of columns.

The conclusion of the installation process for an acrylic bath is presented in the form of installing a screen under the bowl. The screen type must be calculated in advance. It can be either a closed structure or a sliding panel, as well as a drawer.

The choice of bath height does not require strict adherence to building codes. When buying it, you should take into account what parameters are convenient, first of all, for the tenants of the apartment in which the font is being purchased.