Coffee table can be just a functional surface, or it can become an excellent decorative interior detail.
The table made of natural tree. You can buy it at the store or make on one's own.
Magazine tables, handmade, decorate in various ways, sometimes turning an ordinary piece of furniture into a masterpiece design thoughts.
Coffee table options
View, the size and decor of the coffee table can be perfectly different. The only limit is your imagination.
Most common and available in the manufacture of tables:
- square or a rectangular wooden table;
- round and oval table;
- table transformer;
- glass table;
- table from combined materials (e.g. glass and wood).
Note! A set of two or three tables will make sitting in the living room even more comfortable: each guest will have a personal surface for a cup of coffee or a glass of wine.
What to make a table
materials, which are used to make magazines tables:
- wood(solid array, timber);
- hemp;
- glued panels;
- plywood;
- glass.
But on my own make coffee table can be not only from traditional materials. Tables made from henchmen funds and old things such as suitcase, window frame, large coil, pallets, etc.
Important! If you choose a glass table, make sure that it is made of high quality tempered glass, which will ensure the reliability, strength and safety of the product.
Materials and tools
The most beautiful and various the shape of the tables are obtained from wood, chipboard or MDF. The material for the coffee table should calculate in advance.
For a simple table, the following are enough elements:
- bars for legs (4 pcs.);
- thick board, panel or a sheet of plywood for countertops;
- corner mounts for connecting the tabletop with legs (4 pcs.);
For round coffee table you will need:
- 2 round details from chipboard or MDF (tabletop and support for the wheels of the table). Diameter 60 cm;
- rectangular pieces for legs(2 pcs.). Size 60 x 40 cm;
- wheels(4 things.).
- putty for wood;
- glue carpentry (for wood).
You must also purchase impregnation And varnish so that both pollution and give the product beautiful appearance.
In addition, to make a coffee table, you will need the following: instruments:
- hammer;
- nails;
- screwdriver or screwdriver;
- corner mounts(not necessary);
- Master OK.
Round coffee table
Must be ordered in advance details from fiberboard or MDF. Can do them independently, but it should be noted that the table top and castor support must be ideal forms. This will give the coffee table a sophisticated and careful view.
Stages of work
Step 1. In rectangular shapes, you need to make small cuts in the center to fit them into each other. Cuts are made according to thick sheets of chipboard (MDF).
Step 2 We connect the rectangles with the help of cuts. Lubricate the joints with carpentry glue. This is necessary so that the parts of the table hold firmly.
Step 3 We apply from above countertop. We pin it to the legs with thin nails. One is enough for a small table nail in the middle and one nail for each leg.
Step 4 Turn the table over and nail the support for wheels. We also use glue and 5 nails.
Step 5 Carefully cover the nail heads putty.
Step 6 Processing the coffee table impregnation for a tree. We cover with varnish or paint.
Step 7 When is the last layer varnish or the paint is completely dry, you can screw the wheels.
The coffee table can be left in this state, or you can additionally decorate.
Important! Before you start assembling the table, you should paste over the ends of all parts made of chipboard, chipboard, MDF with a melamine edge.
Coffee table-transformer
This table will fit perfectly into the design of any room and will save a lot of space, and if necessary, it can easily turn from a coffee table into dining. The disadvantage of the transformer is difficult assembly. Consider manufacturing such a table.
First you need to decide on mechanism upon which all will be built. assembly. Mechanisms of domestic production cheaper, foreign ones are more expensive.
The design of the transformer comes with backlash and with springs.
Stages of work
Step 1. Acquisition of a transformer mechanism.
Important! Mechanisms for a transformer are available in different types and sizes, so when choosing, you should consider the dimensions of your future table.
Step 2 Using the simulation program, we create layout table that is right for you. Suitable for this programs PRO100 or Google's Sketch Up: Lightweight, with intuitive controls, so it's easy to figure them out. Creating a layout will take 2-3 hours.
Step 3 cutting details You can also do it with the program. She calculates all the necessary materials, which greatly simplifies our work. Having received everything sizes, sawing the details.
Step 4 Table assembly. frame our table will be assembled using confirmations(screeds for connecting parts made of wood materials). For this you need to do hole special drill. Marking is more convenient to do with a pencil or using ordinary stickers.
Step 5 Further, in accordance with the transformer mechanism attached instruction attach it to our frame. Before that, you need to insert springs.
We fasten with a simple through way due to the heavy weight of the mechanism.
Drilling holes for the bolts and with a special drill we drill places for the heads of the bolts.
We strengthen transformer with bolts.
Step 6 Fasten in a similar way mechanism on the other hand.
Step 7 Collecting legs. The weight of our table is approx. 50 kg therefore, it is necessary to fasten the legs of the table together with ordinary furniture screeds.
Step 8 We will screw our legs to the frame of the table. We make markings and drill holes.
Step 9 We fasten all the legs to the frame. legs hid all working moments of the table.
Step 10 Manufacturing countertops. The tabletop is the most main part of the table. Choosing durable hinges for table top. The hinge holes are small. Screw in the hinges.
As a result, after screwing all the countertops to the mechanism, we get such a transforming coffee table:
Product finishing
Decorate coffee table can be completely different ways. To give the product charm, you can decorate it using the technique decoupage, decorate with shells and others unusual items.
Ideas for decoration:
- thick rope- a rope along the edge as a edging;
- Mosaic from various glass objects;
- painting on wood;
- Pasting with wooden pads;
- Craquelure(artificial aging of the surface of the table);
- Pasting with decorative mirrors;
- Veneering(pasting with decorative film).
For how to make a round solid wood coffee table, see video:
Do you love designer clothes, but sigh in frustration when you look at the price tags that adorn them in stores? Try to become a designer yourself. Think it's difficult? Nothing like this! By following the instructions, you can easily create do it yourself original a piece of interior from improvised materials. And we propose to start with coffee table- such a simple, but very important subject furniture. Believe me, at such a table you will be happy to give tea to your guests, who will admire your skills. In addition, by creating a coffee table with your own hands, you will literally fill your House warmth and put a piece of your soul into it. So it's definitely worth a try.
DIY coffee table in a marine style
Romantic idea. All year round, drinking your favorite drink at this table, you will remember the warm sea, the gentle surf and the moonlit path. " Nautical» a table is tenderness, sophistication and originality in the heart of your home.
How to do?
1. Take an old window frame and clean it of dust and dirt. If the former glass cracked, insert a new one, then get rid of the layer of the old paints and sand the surface. Next, you should remove the metal corners, which additionally fix the details. frames.
Ready! Enjoy your creation and give joy to your guests!
Table-suitcase for travel lovers
A very original solution for an old favorite suitcase that has seen other lands with you and that you don’t want to throw away because of the memories.
How to do?
To get started, go to the store where you will need to purchase furniture legs ( wooden or metal). If you want to make a mobile table - then you need to take the wheels. You will also need plywood, screws and a screwdriver.
Now we make markings on the bottom of the suitcase for future legs and drill holes. Since it will not work to attach the legs to the fabric, we put plywood inside the suitcase, make markings on it through the holes and also drill it. Now we attach the mount to the bottom of the suitcase and fasten the legs. Using hot glue, glue the felt inside the suitcase.
To give the table an original look, reminiscent of distant travels, you can decorate it with stickers made in the form of stamps, or decorate it at your discretion.
That's all - an unusual coffee table is ready! By the way, there are a lot of options for turning suitcases into tables: by choosing the legs to your liking, you can make a table in style retro or classical. You can not attach the legs at all if you have a massive suitcase - it will look truly incredible: such a table will bring a sense of adventure and adventure into the interior, the spirit of travel and unexplored distant countries.
Log table for nature lovers
We take wooden bars (in this case, birch) of the same height and width, only 32 pieces. You also need to take the base for the table, legs (4 pieces), putty to match the wood, a screwdriver and glue designed for wooden surfaces.
First you need to assemble the base for the table, then glue wooden bars around the perimeter, and sew up the middle with cardboard. Then we fasten the legs to the bottom. Next, we glue thin wooden dies to the inner surface - thanks to this, it will seem that the table is completely wooden. Now we take the putty and carefully close up all the voids, after which we overwrite until an absolutely flat surface is created. Voila! Now you are the owner of an extraordinary table that will become the highlight of your interior.
If you like the idea, you can create other tables according to this scheme, using, for example, branches instead of bars. To create such a table, you need to take a plywood box, painted black paint, the size of which is 40x40x60 cm (or any other size at your discretion).
To glue the frame, we take branches, from which we first remove the loosely holding bark (we do this with sandpaper). What is the procedure for gluing: first we glue the branches on the long side of the table, and then we select wooden dies and, as mosaic, lay them out on the ends. The thickness of the dies should be approximately 1 cm, they can be cut with a parquet or circular saw. And finally - install the glass, which will be the countertop. If desired, by screwing wheel supports to the table, it can be made mobile.
Using the same technology, you can create many more unusual pieces of furniture. You can lay out the branches horizontally and then you get such a wonderful table. Such furniture looks not only very original, but also incredibly stylish.
original pallet table
An idea that came to the mind of someone truly brilliant. It would seem that you can come up with pallets, which are probably lying around in every dacha? And you can make them a very convenient and functional element of the interior.
How to do?
To get started, collect all the tools you need for your idea: the pallet itself, a drill, clamps, a hammer, screws, a nail puller, glue designed for wood, wheels, soap, a primer, a screwdriver. In addition, take paint brushes, a petal brush head with abrasive bristles for a drill, varnish and a colorless primer.
First of all, you should take a drill with a nozzle designed for wood processing, and clean the surface of the boards from contamination with it. Now carefully disassemble the sanded pallet into parts. Lightly tap the rusty nails with a large hammer and carefully pull them out with a nail puller. Glue the broken pieces of boards with wood glue. At this stage you will need clamps. They need to carefully clamp the boards and wait until they dry out.
Now the parts prepared for the countertop need to be nailed and glued on the reverse side, then clamped with clamps and wait until they dry.
Then cover the table with a colorless primer, and then varnish. Next, on the back of the table, mark the places for the screws to attach the wheels. Drill holes for the fasteners. In order for the screws to easily enter the wood, grease them with soap. Using a ratchet, you can quickly and conveniently tighten hex screws.
Stylish, compact and quite functional table is ready!
Table from boxes
Another original idea captivates with its simplicity and surprise - well, who would have thought to build a table from boxes? But it has come, and now you yourself can create such an unusual piece of furniture at home. Surely you yourself will be delighted, and your guests will appreciate the originality of this idea.
How to do?
Take 4 wooden boxes, sandpaper, water-based varnish, roller and brush, dowels, 10 mm plywood sheet, PVA glue, 4 wheels and self-tapping screws.
First you need to sand the boxes and varnish them. Then, using a drill with an emphasis, make holes at the ends of the boxes. Using wood glue, you need to fix the dowels in the attachment points and connect the ends of the boxes to each other. Attach the wheels to the plywood sheet, and then attach the sheet to the boxes with self-tapping screws. The table is ready!
These extraordinary things can be created from quite ordinary materials. Having imagination and a desire for originality and comfort in your home, you can easily work wonders. Look around: maybe the old window frame has every chance to turn into an interesting element of the interior?
Or maybe a huge wooden reel from an industrial cable that can become an elegant piece of furniture?
Making furniture with your own hands is not only a great way to save money, but also an opportunity to put your creativity into practice!
It's about making coffee tables with your own hands. Too many side tables do not happen. They can be placed next to the sofa to place a vase of flowers or a mug of tea, used as a bedside table or as a stand for houseplant pots. However, monotonous wooden tables are unlikely to revive a dull interior. I want something stylish and unexpected ...
Stylish do-it-yourself table made of wooden slats
This bench can serve as a coffee table, extra seating, or space for houseplants. Such a piece of furniture will “fit” well into almost any interior!
DIY coffee table photo
Materials:
Instruments:
Step one: Using a hacksaw, cut the ends of two 2.5x7.5cm boards at a 45 degree angle. Cut out fragments from 2.5 × 5 cm bars, the length of which will correspond to the internal length of 2.5 × 7.5 cm blanks.
how to make a coffee table with your own hands. A photo
step two: Place 2.5x5cm blanks in the middle and 2.5x7.5cm around the edges. Make sure the ends of the inner rails are aligned.
Step Three: Measure the distance between the outermost 2.5x7.5cm boards and cut two blanks of this length from 2.5x10cm boards. They will serve as the lower supports for the bench. Secure them by screwing self-tapping screws into each longitudinal rail.
Step Four: Using the Kreg Jig, drill two pocket holes at each end of the support rails. These holes will be used to connect to the 2.5x7.5cm end pieces.
Tip: It's hard to give specific recommendations on how far from the edge to attach the Kreg Jig. This depends on the length of the screws used, the exact thickness of the board, etc. We advise you to pre-practice on unnecessary scraps of boards.
unusual coffee table with your own hands. A photo
Step five: Place 2.5x7.5 cm blanks along the edges of the structure. After making sure that their ends are at the same level, fix them with clamps.
Tip: If you are using soft wood (such as pine) to make the table, place unnecessary scraps of boards under the clamp supports. Otherwise, traces of clamps will remain on the wood.
Step six: Securely attach the 2.5x7.5cm end pieces to the base of the bench by driving 3.5cm wood screws into the countersunk holes you made at the ends of the support rails earlier.
wooden coffee table. Master Class
step seven: Measure the width of the finished base to determine how long you need to cut 2.5 × 7.5 cm blanks for the ends of the bench. We recommend that you take a sip with a small margin in length, and then take your time to grind off the excess until you achieve the perfect fit.
Step eight: Moisten the ends of all rails with water and apply a small amount of Gorilla Glue.
Step nine: Install the end boards in their intended place and wrap the entire structure with a belt so that it does not fall apart until the glue dries. For reliability, you can additionally fix the ends with a few finishing nails.
Step ten: Sand the surface of the bench with 120 grit sandpaper to eliminate any unevenness at the joints. All gaps in the seams and recesses from the heads of nails (the latter must be recessed into the wood without fail) fill with putty. When the putty is dry, sand the surface again, this time with 220 grit sandpaper.
Step Eleven: Paint the bench. We advise you to sand the surface again before painting with 400 grit sandpaper and water.
Step twelve: On the lower support rails, fit the special mounting plates for attaching the legs. When fixing them, make sure that you drill holes in places where there are no already screwed screws. The distance from the mount to the edge of the bench base should be about 2.5 cm. Screw the legs themselves into the mounts.
Coffee table made of copper pipes. Master Class
The material for the manufacture of the next table can, perhaps, be called the most unexpected. This time we decided to tell you how to make a table out of ... copper tubes with your own hands.
Materials and tools:
The figure below shows all parts (pipes (A-E) and various fittings (F-H)) with their dimensions and quantities. All that's left for you to take pipe cutter and sit in front of the TV, which will brighten up the tedious cutting process a little. It's not hard, just a little boring. 😉
When all the blanks are ready, you can begin to assemble the lower part of the table. How to do this is shown in the figure.
Having collected the lower tier, you can proceed to the upper one. The only part not listed in the parts list are the four pieces of 2.5 cm pipe that are placed in tees at the top of the corner posts. Without these inserts, you will not be able to put on decorative caps, because. the latter have the same diameter as the tees.
Reliable connection of the tubes to each other will ensure glue, but we recommend applying it only after the preliminary assembly of the structure, i.e. after you make sure that all the cut tubes are of the right length and fit well with each other.
Wooden shelves, which you can pre-paint if you wish, are fixed with special clamps that are placed on the underside of each board. Now you are ready to decorate your home with your new DIY table!
DIY lightweight cement table
Concrete countertops and other interior elements have recently become more and more popular. However, for all their attractiveness, they are not without a number of shortcomings. First, pouring large amounts of concrete can sometimes be quite expensive. Secondly, if we are talking about small side tables, another serious problem comes to light - such furniture turns out to be too heavy. On the one hand, there is a desire to get a good, solid thing, on the other hand, I want to be able to move a table made by myself without the help of professional movers. The found solution can be considered an insight.
Materials and tools:
Step one: Mark and cut the foam sheet. From a 120x240 cm piece, you can cut 18 squares 40x40 cm. Stacking them on top of each other, you get a 40x40x45 cm box.
do-it-yourself foam board. A photo
step two: Glue the cut pieces. 3M Super 77 spray adhesive is ideal for this. It is best to perform this stage of work outdoors. Don't forget to wear gloves and a long sleeve shirt. Apply an even layer of glue to one side of the first square, then do the same with the second. Wait ~15 seconds, then connect the squares, making sure their edges are joined. Repeat this until all the square blanks are connected into a single whole. Wait about 30 minutes before proceeding to step 3.
Step Three: Now the most interesting thing ... giving the resulting parallelepiped the outlines of the future table. We decided to make a table in the shape of a cylinder. You can come up with something more original or, on the contrary, keep the original block with right angles. Cutting foam is easy and fun. At first, your design will have a rough, angular look, but don't worry! After the table has been given the desired shape, it will be time for grinding. Using sandpaper 36 grit will quickly smooth out any bumps. As you get closer to the ideal, gradually move to sandpaper with a finer grit size. Don't aim for a super-smooth surface, at this point you only want to achieve the desired shape.
Step four: The surface of the future table is polished, it is time to cement it. The first coat, applied throughout the foam mold, will fill in the voids and texture of the foam. You only have ~20 minutes, so act fast so you have time to iron out the bumps. When the applied cement mortar dries, you can apply the next layer. The number of layers depends on how smooth and even the surface you want to have in the final (as a rule, four to five layers are required). It should be remembered that the smoother the surface of the final layer before it dries, the less it will have to be sanded!
Tip: When preparing cement mortar, follow the manufacturer's instructions. You should not prepare more mortar than you need to apply one layer (for example, we used 220 ml of water and 450 g of cement). Make sure you don't forget to cover your workbench or workshop floor as this is a messy job.
Step five: After the last layer of cement has dried, you can sand the surface if desired. We wanted to achieve a glossy finish, at least on the top of the table, so we sanded it down using a variety of grit sandpaper, ranging from 100 to 2000.
Tip: If you are planning this operation, get a protective mask that will help you protect your lungs from cement dust.
(The table made in this project turned out to be very strong and strong, but at the same time it weighed no more than a kilogram.)
Do-it-yourself stump table
The material for the next table sometimes literally lies underfoot. Even residents of megacities, if desired, will be able to find a suitable stump.
log table. A photo
Materials and tools:
- wooden block;
- white acrylic paint;
- manual grinder;
- chisel;
- hammer;
- decorative upholstery nails;
- molar tape.
Step one: Find a table base! This should not be an old rotten stump, but a freshly sawn block of wood. Let it dry for at least 6 months (there's nothing worse than waiting, but it's necessary) until the bark begins to peel off the trunk.
Step two: Using a chisel, gently remove the bark from the log in a downward motion. If the stump is dry enough, you won't have to use too much force.
Step three: Using a sander with medium grit sandpaper, sand the surface, removing the remaining bark and smoothing out sharp corners. Do not forget to sand the surfaces of the lower and upper cuts. Wipe the wood with a damp cloth.
Step Four: It's time for painting. We used a white semi-gloss paint that includes a primer (we needed three coats for full coverage). You can choose a different type and color of paint, focusing solely on your taste. Don't forget to pre-prime the surface of the wood. Make sure you don't forget to finish the bottom cut.
Step five: Get your decorative nails ready. Apply a strip of masking tape along the top edge of the side surface of the block of wood, thereby marking the place where the first row of nails will be located.
Step Six: Using a hammer, drive in the first row of decorative nails. To ensure that the distance from them to the upper edge is the same throughout the “line” of nails, use the strip of masking tape you previously glued as a guide. After the first row is completed, repeat the same with the second and third row of nails (we needed almost 150 studs for three rows).
Tip: Cover the underside of the stump with furniture felt so you can move the table around the room without damaging the flooring.
The work is done. You can use the new piece of furniture and be proud that you made this charming coffee table with your own hands.
Coffee tables: do it yourself
Wooden table: how to make?
Many people are interested in how to make a wooden table with their own hands to get a model with an original appearance. Let's consider one of the options.
To make an original coffee table with your own hands, you should take timber with a section of 5x10cm. It is sawn into parts of the following length: 130cm - 9pcs, 21cm - 12pcs, 34cm - 2pcs.
The prepared beam is placed in three rows, leaving room for attaching the legs.
Remove the top two rows. The timber in the third row is slightly shifted to get an interesting appearance. Next, mark the places for attaching the transverse parts.
Lay the extreme bars of the second row and mark the places of the cuts. Then cuts are made circular saw or a hacksaw with a chisel.
The bars of the second row are fixed with screws.
The third row is laid, the parts are shifted and fixed.
An empty space is formed under the tabletop, in which they are fixed legs.
Wood is processed protective composition that preserves the grain of the wood.
The original model of a wooden coffee table with their own hands
First, to make a table with your own hands, prepare boards: 6pcs - 22.5x45cm, 2pcs - 22.5x41cm, 8pcs - 20x4cm, 8pcs - 40x4cm.
Planks 20x4 and 40x4 are glued in pairs. To ensure they are securely glued, they are clampedclamps.
While the blanks for the legs dry, collect box from the rest of the details. They are connected with carpentry glue and nailer.
legs attached to the box with countersunk screws. At the bottom between the legs put the crossbars.
Lid for a table made of wood is also made using boards 22.5x45cm. They are glued together, and then the resulting square is sawn into two triangles.
One triangle is fixed with screws, and rails are fixed on the second so that it is removable.
All parts are sanded and painted.
Stylish coffee table. Master Class
They start making a stylish table with their own hands from marking the sheet Chipboard 16mm thick. The center is found on the sheet at the intersection of two diagonals.
A nail is driven into the center, to which a thin rope or a harsh thread is tied.
Tie a pencil to the free end. This allows you to draw a circle.
If you want to make a table with your own hands not round, but more interesting, then the shape of the circle is changed by drawing bends.
The tabletop is cut out jigsaw or reciprocating saw.
Edges are processed sandpaper.
legs fasten with screws. If they are inclined, then the slope should be outward.
Table surface stain in the right color.
Simple shape coffee table
To make a coffee table with your own hands, take boards 40x15cm - 2pcs and 50x19cm - 2pcs. In addition, you will need legs and mounting plates.
On one of the boards they fix more plates for fixing legs. From the edges should retreat a little.
The sides and top of the table are fixed with wood glue.
It dries for about half an hour.
Do-it-yourself log table
A do-it-yourself coffee table with such an appearance will become a decoration for a summer house or a country house. Begin work with the assembly of the frame. To do this, take sheets plywood two centimeters thick. A base with dimensions of 60x80cm is cut out of them. A box 68 cm long, 45 cm wide and 40 cm high is attached to the base.
do-it-yourself log table. A photo
After that, cut thirty pieces of round logs 45 cm long and twenty-four round cuts, the thickness of which is 3 cm.
Harvested logs are attached around the perimeter of the box. Attached from below to the base videos. They are installed, departing from the edge by three centimeters.
In addition to glue, it will be useful to fix the logs on the screws from below.
Installed on the box plywood cover. Rounds are glued on it. The space between them is filled with wood putty, which does not shrink when dried. Apply it in stages so that the previous layer has time to dry.
After the putty has dried, the surface polished. To do this, use a surface grinder. After that, the log table can be used.
Rustic table
If you are interested in how to make a table from wood cuts with your own hands, then you should read the instructions.
They start making such a coffee table with their own hands by choosing the right material.
Selected saw cut inspect for interesting details or parts that need to be removed.
Unnecessarily rough, protruding parts are cut off. On the side where the countertop will be, the surface align.
For work use cleaver, which moves at an angle of forty-five degrees.
The sides also need to be aligned.
All surfaces grind, using ever-decreasing grit.
Glossy varnish mixed with resin in equal proportions.
The resulting composition is applied to the wood in a thick layer. It will dry for a long time. If gaps appear during the drying process, they must be filled.
bottom side clean up. If there are voids in the tree, then they are filled with resin gradually until the hole is filled.
If there are air bubbles in the dried resin, then the surface is heated with a heat gun or burner.
A second layer of resin is applied and again left to dry for two days. The entire surface of the countertop must be glossy.
At the handles of the ax, a part is cut off at an angle of 22 degrees. The surface is sanded and painted in the desired color.
Mark out places for legs and make holes.
Glue is poured into the holes and the legs are installed. Each has a special pad.
White coffee table
They make such a coffee table with their own hands from plywood And glass. First, prepare a drawing and determine the dimensions. Then proceed directly to manufacturing.
handmade coffee table Blueprints
Plywood acts as a countertop box with partitions, covered with glass on top. Triangular legs are attached to it.
At the box, you can make a door to access what's inside, or raise the glass.
legsfor a table with your own hands, it is better to cut it out of fairly thick plywood. It must be remembered that double legs are easier to make than more single ones.
When all the parts are ready, they are assembled together and fastened. The table is painted or varnished.
DIY pallet table
If you know how to make a table from pallets with your own hands, you can get an interesting version of furniture for the home. Pallets must first be sanded, sawn into pieces and primed.
pallet table. Instruction
A table is assembled from the prepared material. To do this, attach the legs or wheels. The pallet itself or the surface assembled from individual boards can be used as a table cover.
After all the parts are connected, the structure needs to be painted or varnished. After that, the pallet table is ready.
The second version of the table from pallets
To make such a table with your own hands, you will need one or two pallets. First, you should draw a sketch of the future product, taking into account all sizes.
The table will have a shelf for small things under the tabletop. The design is assembled from prepared parts.
The surface is painted with black paint, but this is not the only possible option. There are many other decorating possibilities.
Coffee table stand
How to make a table out of copper pipes with their own hands, may be of interest to many craftsmen.
Pipes are first marked and cut. Then they are smeared epoxy glue and assemble the base for the table.
This base is applied to the board and the attachment points are circled. In these places you will need to drill holes by pipe diameter.
Four holes are drilled, but not through.
The board is impregnated polyurethane and cover stain.
The rest is collected from the pipes frame.
Legs and base cover paint in the color of the tabletop.
Made from a piece of cloth pocket, which is hung on the transverse parts of the legs.
All parts are assembled together, adding epoxy glue for reliability.
DIY marine-style table
Such a table from the old window frame looks very romantic. The frame is cleaned of dust. If required, replace the glass.
wooden surface stain white acrylic paint. After drying, the paint layer is treated with sandpaper so that the wood comes out. Also available in blue and white.
To make legs, take cutting and sawn into pieces of 34 cm. After that, it is treated with sandpaper to remove roughness.
The blanks are drilled in four places. Next, each leg is attached to the base, and the base with legs to the frame. All this is done with self-tapping screws.
The legs are covered with coarse rope.
For cleaned and defatted glass glue sea souvenirs and seafood. From above they must be covered with glass, which is cut out in the workshop to fit the frame.
Make a loop at one end of the rope. The rope is glued around the perimeter of the frame, leaving the loop free. When the second end reaches it, they tie an interesting sea knot.
An essential attribute of every home is a coffee table. At first glance, it may not seem like the most necessary furniture, the purchase of which is postponed for a long time.
But it is precisely such interior items that make it truly cozy and comfortable. On the coffee table you can place all the things you need that should be at hand: books, remotes, keys and other small items.
DIY wood coffee table
If you still have not been able to find the option that suits you or have difficulties with the design, we will share with you ideas that will tell you how to make a coffee table with your own hands.
A wooden coffee table will fit perfectly into almost any style of interior.
Wooden coffee table
Wood is especially popular among the many different materials from which furniture is made. If you properly care for wooden furniture, it will serve you for a very long time. In addition, working independently, you can create a unique piece of furniture.
To make a wooden coffee table yourself, you will need to prepare all the necessary materials and tools. You can put the finished structure directly on the floor or additionally make four legs on which your table will be located.
An example of how you can make a coffee table with your own hands from wooden pallets
By using multiple drawers, you can also make great living room coffee tables. Four large drawers fastened together form a stylish side table. There is usually a gap in the middle of the boxes, which can be decorated with various items.
Wooden crate living room table
Photo: do-it-yourself coffee table
A coffee table made of wooden boxes is a great place to store all the necessary things.
DIY rectangular coffee table
Modern look
You can also make a side table that looks modern and stylish. But before choosing a specific design for the table, determine the overall composition of the objects in the room. It is important to observe a single style in every item that is used indoors.
Stylish wooden table with metal legs
Pay attention to the retro style, which is also very popular today.
A real work of art - an elegant low coffee table made of wood
Effective design move - furniture duet in the living room
Coffee table decoration
You can turn a coffee table into a stylish and up-to-date piece of furniture with the help of decor. Thanks to this, the most inconspicuous table will become a real work of art. You can decorate it with anything: old wallpaper, shells, mirrors, fabric or mosaics.
Use textiles to decorate a coffee table to give it originality
Think about your mood. After a long working day, you want to return to the atmosphere of calmness, comfort and coziness. Therefore, for table decor, it is better to select such elements that fit perfectly into the overall interior of the apartment and do not disturb the harmony.
Mobile coffee tables on wheels are a beautiful piece of furniture that will transform any living room
Materials and items that can be used more than once
A wooden pallet is a versatile item from which you can make anything with your own hands. Perhaps the easiest way to build a coffee table, since the pallet is, in fact, a finished worktop. It can be painted in any color, apply a pattern, symbol or ornament. The legs can be wheels or wooden blocks.
Turn a wooden pallet into practical designer furniture
Table design options depend only on your skills, preferences and, of course, the interior of the room.
A glass top can set the tone for the entire interior.
Suitcases and old radiators
Your old suitcase can become an integral part of the interior of the apartment. To make a table out of it, it is enough to attach four legs. A coffee table made from a battery will also look unusual and original.
DIY coffee table from an old suitcase
Wooden coffee table on wheels in the interior
Do not be afraid to experiment and create a fun atmosphere in your home
Cozy reading nook with a round coffee table that can hold a large number of your favorite books
Building a coffee table with your own hands is the perfect way to give the interior originality and surprise guests. This piece of furniture is an integral part of any recreation area and always attracts attention.
Build a coffee table with your own hands - the perfect way to give the interior originality and surprise guests
Comprehension of the science of turning ordinary things into the highlight of the situation is subject to everyone. And in order to understand how to make a coffee table with your own hands, you just need to be inspired by creative ideas, show your own imagination and make a little effort.
What kind of source materials do not use interior designers in their work. But the undoubted favorite is always wood. She is loved for her naturalness, environmental friendliness, natural texture and color palette.
Original coffee tables made from stumps or saw cuts of a natural tree trunk, despite their apparent simplicity, will become a completely unique piece of furniture and will fit perfectly into the design of a bedroom or living room decorated in eco style.
What kind of source materials do not use interior designers in their work. But the undoubted favorite is always wood. - blank (stump with a part of the root system or saw cut of a whole tree trunk);
- chisel;
- hammer;
- saw;
- building level;
- manual or electric planer;
- grinder or sandpaper;
- brush.
How to make:
- a wooden blank of the required size must be thoroughly dried in a warm, dry room;
- using a hammer and a chisel, remove the bark from the tree (if desired, the bark can not be removed);
- using a saw, form the base of the table or legs from the root branches;
- check the evenness of the countertop with a building level, if necessary, trim it with a planer;
- clean the workpiece from debris and chips with a brush;
- grind the cuts and the side surface of the stump with a grinder or fine-grained sandpaper.
The stump processed in this way is in itself a kind of small table. If desired, it can be primed with a bioprotective primer, painted with paint, applied with various patterns and varnished.
Gallery: coffee table made from improvised materials (25 photos)
Wood coffee table (video)
woody layered fantasy
A plywood coffee table is a more affordable alternative to natural wood. Multi-layered, faceless and unsightly at first glance, the material has almost the same qualities as wood, but at the same time it is an ideal basis for simple furniture design. Plywood elements can be given any shape: rectangular, rounded, broken, which stimulates the master to bold design experiments.
Having conceived a plywood coffee table, work should begin with a drawing, using existing sketches or creating your own. In the latter case, we will get a 100% original product at the output.
Plywood coffee table - a more affordable alternative to natural wood How to make a small round plywood table on rectangular bases:
- prepare a drawing including 4 parts - 2 identical round shapes for the base and countertop, 2 identical rectangular shapes for the table supports;
- transfer the detail patterns onto a plywood sheet with a nominal thickness of 9 to 30 mm (the thicker the sheet, the stronger the final product will be);
- cut out the required elements with an electric jigsaw or hacksaw;
- grind the ends of each template with a grinder;
- in rectangular shapes in the center, using a router, make cuts 1.5-2 cm wide so that you can cross-insert the parts into each other;
- connect the rectangular parts, after having smeared the joints with wood glue;
- fix the tabletop and the base of the table on a wooden cross with liquid nails (to increase the strength of the product, additionally fix the round parts with self-tapping screws or tongues);
- process the finished product with stain, paint (optional) and open with varnish.
The simplicity of the design makes it easy to screw the wheels to the table. Interior design in which plywood furniture will look great is grunge, minimalism, constructivism.
The idea of a square shape
A coffee table made of drawers is another unexpected idea of designers, captivating with its simplicity. Rectangular storage containers of various sizes are a universal basis for creating furniture with your own hands. Unusual tables, chests of drawers, cabinets and chairs can be assembled from simple plastic boxes, but a more elegant and vintage look of homemade furniture is easier to achieve using vintage wooden boxes.
What you need to make a table from boxes on wheels:
- 4 wooden boxes, the same size;
- a sheet of plywood with a thickness of at least 10 mm;
- 4 swivel casters for containers, trolleys and scaffolding;
- puncher or screwdriver;
- wood glue;
- self-tapping screws;
- fasteners (dowels);
- impregnation for wood;
- water-based varnish;
- brush.
A coffee table made of drawers is another unexpected idea of designers, captivating with its simplicity. How to make a table:
- clean the boxes with sandpaper, apply impregnation and open with varnish;
- let the product dry;
- put the boxes on their side and put them together in such a way that a table is formed (at the same time, peculiar shelves are formed on the side of the structure);
- mark the mounting points and drill holes for fasteners;
- connect boxes;
- using self-tapping screws, fix the wheels at the corners of the plywood sheet;
- fix the fastened boxes on the plywood base.
In the resulting recess in the center of the product, you can pour a variety of decor, put a vase of flowers, a lamp, put magazines or books in the side shelves, turning the coffee table into an original bookcase. This type of furniture will fit well into the design of a home furnished in eclectic, country or French Provence style.
Automotive element in the house
A completely unusual piece of furniture can be made using an old car tire. This technique is used by the most fashionable designers, and perhaps it is this idea that will form the basis for creating an exclusive coffee table with your own hands.
For the coffee table you will need:
- old tire;
- plywood;
- rounded wooden beam for the manufacture of legs;
- studs and nuts;
- liquid Nails;
- glue gun;
- drill and screws;
- natural tourniquet for decoration;
- finish coating.
How to make:
- choose the most surviving wheel, wash and dry;
- cut a wooden beam into three equal parts and make table legs (if you have your own lathe, it is advisable to make cone-shaped supports);
- give the tire stability with the help of studs, nuts and hard plywood inserts in three places;
- put a wooden tabletop on liquid nails and fix it on the tire with self-tapping screws;
- attach the legs to the base and screw to the tire (it is desirable that the screws through the rubber enter the plywood stiffeners);
- using a glue gun, fix the natural twine in the middle of the countertop;
- braid the countertop in a circle from the center to the edges, constantly gluing the rope;
- continue decorating until the twine covers the entire rubber surface of the tire;
- fix the end of the braid with glue and a metal bracket;
- cover the table with a top coat (wax or varnish).
A tire table does not have to be decorated. By installing special wooden limiters at the bottom of the tabletop, it can be made removable like a lid, which will allow you to store various useful little things inside the tire.
A table made from a car tire and decorated with a towed rope can be a highlight of a fusion or loft style interior, and a brutal rubber table will fit perfectly into high-tech and techno style.
Exhibit of the travel club
Retro style lovers and avid travelers who want to express their passion in an interior setting can easily make a table with their own hands from an old grandfather's suitcase.
What you need:
- suitcase with rigid walls;
- wooden furniture legs or wheels;
- a sheet of thick plywood;
- screws and screwdriver.
Even a strong suitcase is better to be further strengthened with plywood sheets. This will allow you to get a flat "tabletop" without dips, on which you can put both plates for food and glasses. Product manufacturing steps:
- cut 2 templates from plywood and attach them from the inside to the walls of the future suitcase table;
- make markings for the legs and screw them to the bottom plywood template inside the suitcase with screws;
- paste over the inner surface of the resulting table with a baize, linen or felt.
Original tables from suitcases can be decorated to your taste in a variety of ways. They are decorated with travel stickers, envelopes, stamps. The decor made using the decoupage technique with the effect of aging looks very profitable and elegant. The interior design, in which the table-suitcase will look organically, is avant-garde, eclectic, loft and fusion.
DIY coffee table with LED backlight (video)
Europallet product
Few people know that it is possible to create an exceptional home interior using ordinary wooden production pallets (Euro pallets). The process of making a coffee table from one or more pallets will not require much effort, since the product itself has an extremely successful shape.
Required materials and tools:
- wooden pallet;
- swivel wheels;
- brush;
- grinder machine;
- wood glue;
- drill and screws.
Assembly order:
- clean the pallet from dirt with a stiff brush;
- sand the boards;
- coat the structure with a primer for wood products;
- fix the swivel wheels at the corners of the base of the product with a drill and screws.
Having redone the pallet, you should give it a designer look with the help of finishing. White or bright acrylic paint, water-based varnish will help with this. The table from the pallet can be painted all over or an original drawing can be applied to its working surface.
If desired, the pallet can be ennobled by placing on top of impact-resistant glass of the same size as the pallet or treated plywood. A pallet table can be static and just stand on the floor, or it can be able to go to a place convenient for the owners of the room if spinning wheels are attached to its base. In addition, rubberized wheels do not scratch the floor.
New life for old things
Changing the windows in the apartment for fashionable metal-plastic, many throw away the old frames, not even suspecting that an amazing home-made coffee table can be made from them.
All you need to do is:
- remove metal fittings from the frame;
- clean up paint residue;
- strengthen the corners of the structure with additional fasteners;
- lay a frame with glass on unusual legs (piles of books or packs of old magazines can serve as supports for such an impromptu table).
In the case of using a double frame, it is permissible to have the most diverse decor between the glasses:
- beads;
- colored sand;
- sea shells;
- dried flowers.
Changing the windows in the apartment for fashionable metal-plastic, many throw away the old frames, not even suspecting that they can be used to make an amazing home-made coffee table Not a single guest will remain indifferent when he sees such a creation of the master. Interior design, which involves the presence of hand-made furniture from old things, is eclectic, kitsch or pop art.
As a basis for the table, you can use:
- cast iron battery;
- skeleton of an automobile engine;
- barrel, grandmother's chest, large stones;
- rolls of old wallpaper.
From water pipes you get unusual legs, and from plastic, door leaf or an old mirror - an original countertop.
Using fragile glass as a work surface, one-leg structures should be avoided; those who have small children and large pets in the family should be careful with glass.
Using improvised materials, showing imagination, you can make an original and multifunctional transforming table, an exclusive bedside table and a comfortable sofa table-shelf.
Anyone who has ever tried to remake banal things into unique "living" interior items is unlikely to be able to stop. Independent design and manufacture of furniture is a fascinating, addictive process, which for many becomes a real hobby. Homemade coffee table is the perfect item for the first experience. Out-of-the-box thinking, original design approach and a bit of craftsmanship - all that is needed for success.
Attention, only TODAY!