The very concept of "tattoo" (now a tattoo) was born in the 20s of the XX century in correctional colonies, in other words, in the zones. Although the tattoos themselves appeared much earlier, back in ancient world, soldiers pricked symbols, animals, etc. on the body. And in the 20s of the last century, tattoo became a "secret" language. In those years, a person had tattoos on his body, which means that he has definitely served time, but now the tattoo has lost its initial meaning, it is being pierced for the sake of decorating the body.
Between the tattoo and the tattoo there is one very a big difference- There is no tattoo for beauty, it carries a story, and it is from the tattoos that you can understand what kind of person stands in front of you. Now times are different, those same thieves 'eight-pointed stars that only recognized thieves' authorities heated up can be found on the chest of a teenager in pink shorts, who has no idea what kind of stars he has pinned on himself. For such an act in the zones of the USSR they ripped off the skin from the prisoner, and now ...
The second feature is that the tattoo is NEVER multi-colored - black mascara that looks green under the skin is the true color of the tattoo.
For a long time I was engaged in tattoos (tattoos, not tattoos), a lot of time has passed since then, but recently I discovered the typewriter with which I worked. More than a dozen of these machines have been made, a very convenient and light thing for those who are fond of tattoos. Today I will tell you how a DIY tattoo machine is made.
Homemade tattoo machine
The foundation- a helium pen, which first needs to be disassembled. After that, remove the tip of the paste and drain all the gel. Then we take a very thin needle and press on the ball so that it falls out. In the resulting hole, the needle will work for us.
Itself needle made of sharpened (the edge, which actually prick) guitar strings. A spiral is often wound on the strings, we need to rewind this spiral.
Why is a string good? It perfectly holds the paint (gel), does not rust or deform, other materials (steel, nichrome, etc.) do not cope with this task in such conditions.
Engine (motor)- any low-power DC electric motor from a toy car, player or tape recorder, with an operating voltage of 3-9 Volts. For example, a normal 4.5-Volt engine from a player at 6 Volts can rotate at a speed of 3000 rpm, taking into account the friction forces, the revolutions are reduced to 2000, we divide this figure by 60 (1 minute-60 seconds) and we get the number 33. What is 33? This is the number of times the needle enters and exits in one second, that is, a wound is obtained like from a razor, and this is normal, since only a high-speed tattoo machine can apply a high-quality tattoo.
Flywheel, in fact plays the role of a crankshaft. Such a flywheel is found on all electric motors from tape recorders, we only need a plastic flywheel (they are also made of brass). Next we need to drill a hole in the flywheel. If it is not possible to drill, then the hole can be made with a heated needle or a small nail. The hole is made at a distance of 1.5-2mm from the center of the circle, keep in mind that this distance is the stroke of the needle.
After that, we take the string and bend the limb (0.5 cm) 90 degrees from the unsharpened edge, this section should enter the hole on the flywheel. It turns out that when the motor rotates, the needle will move vertically. The length of the string itself depends on the type of handle, so we select it by experience.
Sharpening the string can be done with a zero or a file, it can also be done on a sharpening machine.
The engine can be attached to the handle with glue, but it is advisable to make an attachment from a sheet of aluminum, then fix the stand in a convenient place with tape or tape.
This homemade tattoo machine is powered by charger for a cell phone or from compact batteries.
As you can see, there is nothing super complicated in manufacturing, everything necessary materials can be found at home. Everyone can make such a tattoo machine with their own hands.
This instruction will tell you how to make a tattoo machine at home. In order to get a tattoo, you don't have to go to an expensive tattoo artist or buy special equipment.
With a little effort, it is possible to make the necessary equipment yourself.
To work, you will need to find the following parts at home:
- Electric motor.
A motor from a children's toy with a voltage of at least 12 volts will do. A motor with a lower voltage is not needed - it will be too weak for such a purpose. - Power Supply.
Any unit with a voltage of at least 12 volts will do. - Gel pen or mechanical pencil (plastic or metal).
It will serve as the body of the device, as well as guide the needle inside the machine. - Brace.
This will attach the motor to the gel pen. The staple can be made from metal, for example from a regular tablespoon, by removing the part that is used for food. You can use a toothbrush instead of a spoon, heating plastic handle a lighter and bending it with the letter "L" (an example is shown in the figure). - Insulating tape.
- Needle.
A regular guitar string is used as a needle (it is better to buy a new string in a specialized store). Choose the thinnest string. - Button with 4 holes.
Assembling the device
Take a pen, disassemble it, and remove the ink from the refill.
Rinse the rod well, no ink should remain there. Using a file, grind off the metal tip of the rod so that the string can pass through without effort. Cut the rod about halfway (this is necessary to reduce string vibration).
Preparing the motor: a button must be attached to the motor shaft using super glue. Make sure that the adhesive is completely dry before assembling the device.
The connection between the motor axis and the button must be of good quality and not loosened over time. Do not fill the rest of the button holes with glue - they will still come in handy.
If a plastic gear is attached to the axis of the motor, you do not need to glue the button, but make a hole for the string in the gear with a red-hot needle.
This is done as follows: first of all, the L-shaped bracket and the handle are connected using electrical tape. Tightly tape the clip to the handle with several layers of electrical tape so that the bend of the clip and the top end of the handle are flush.
To the other part of the bracket, the motor from the toy with the glued button should be wound in a similar way.
Now you need to pull the string through the handle and cut it, leaving some margin. Then the end of the string is bent a few millimeters and passed through one of the holes in the button (or through a hole in the gear).
As you rotate the motor axis, you will notice that the string moves up and down. The tip of the string sticking out of the rod is cut in such a way that when the motor rotates, the string is shown from the tip by 3-4 mm. Sharpen the string with a knife-turning bar.
The power supply is now connected to the engine. For convenience, a switch can be attached to the machine. The device is ready to use!
Don't forget about safety and hygiene! Use a new string and a new tip every time! Boil the string in water for at least 10 minutes before use.
These simple rules will help you avoid contracting diseases such as HIV or hepatitis.
Tattoos constantly give us confidence and bring a lot of joy. But nothing stands still, and today we will consider. Yes, it is already possible.
How to make a tattoo at home: henna, machine
That is, it is imperative to prepare and approach this very responsibly. If you do this, you can definitely become a professional who will be very high level... So, it is quite possible to get a tattoo at home.
How to get a tattoo at home?
Let's consider where you can get a tattoo, and most importantly, how it can be done. First, you will be able to get the services you need in the salon. There you will be provided with everything you need, what you want, and most importantly, how you want.
- There are masters who are always ready to help and provide the necessary services. That is, the salon is the first option.
- The second option is at home, here it is already characterized by the fact that you can get services from someone at home. This is not always legal.
And there is an option when very often they begin to fill tattoos on their own. That is, you can simply apply the desired object to yourself on your own. To do this, you only need a typewriter and the necessary ink. There is absolutely nothing complicated here. The only downside is the complexity. It is very difficult to get a tattoo for yourself. It's almost impossible.
Let's consider in more detail how you need to make a sketch, if there are rules or something else. First, you need to sketch the drawing. Naturally, first you need to choose the drawing itself, then come up with its color, size and background.
How to prepare a sketch of a house and start driving This is how sketches can be made. It is best to draw the part of the body where the tattoo will be, then you need to draw a picture there. Next, we decorate it with those paints in which the tattoo will be. It must fully correspond to the size and shape. Next, the sketch that you got needs to be done with the background that you need, the colors.
We take the sketch to the master, and he makes a tattoo. You can often make a sketch in the salon itself. These services are provided there. You can do and how to make a tattoo at home with a needle sketches. The important thing is that you can ask a friend for help, who will definitely help you and tell you what to do.
You can download a ready-made sketch from the Internet that you like. Finding a sketch is easy. You will be able to prepare it yourself and not rely on anyone in this matter. You can do, for example,. It is very convenient. You will definitely be sure that you are doing everything right.
Where to get tattoos at home?
Let's take a closer look at where it is fashionable to get a tattoo. There are actually a huge number of options. They need to be disassembled. It is very popular and fashionable to get a tattoo on the arm, wrist, neck, back and shoulders. Very often we get tattoos where it is very popular and do not think about how beautiful it is. Today, tattoos are often done in intimate places.
Where can you get tattoos at home? There are so many. This place has a huge painful defect, so be prepared to endure it. Also this option they don't like it very much precisely because it is characterized by the fact that no one will see the tattoo. It will only be for you and yours young man... Basically, the signatures on the hand are tattooed. So very few people can decide and go for it.
So, just pick a tattoo for yourself and decide on a spot. Everything may also depend on what size the tattoo will have, what drawing and design it will have. If you can choose a tattoo, then it will look aesthetically pleasing and beautiful everywhere.
So just prepare yourself to look really good. Be sure to prepare yourself to find a tattoo for yourself. Today, tattoos are becoming a very popular art form that constantly enters and changes our lives.
We make henna tattoo for a long time Today the place where you can get a tattoo is becoming more and more interesting. We consider it necessary to consider how to make a henna tattoo at home... There are a huge number of them. Thus, you just need to consider all their options and choose the option you need.
Let's consider in more detail what are the options for applying a tattoo in intimate places. First, there are so many how to get a tattoo at home video... They will help you choose the right tattoo, teach you how to draw up a sketch, the main thing is not to make a mistake. With the help of the video, you can even get a tattoo at home.
Homemade Tattoo Videos There will be a recipe for how to get a tattoo. You can find videos on the Internet. There are many options for how to get tattoos. Firstly, there is a theoretical part of how to get tattoos properly. There are other videos about how to make a tattoo at home recipe and photographs. They show the result of what you will succeed and what it can lead to.
It is very important to choose the right tattoo and place for it, so you get it right, you will not have any problems and disagreements. Videos and photos will help you see what you end up with. You will see what drawing you got and what to do with it. The video teaches you how to get tattoos with henna, permanent tattoos with a machine, and so on.
Just watch the video and it will tell you everything there is to know about tattoos. Today, tattoos are constantly entering our lives. They change and develop it. So you need to find out all the options and types of tattoos. This is not difficult. We will consider them in our article. It is very important to know about all tattoos and their styles. Thus, you can simply find the perfect option for yourself.
The concept of "tattoo" appeared at the beginning of the last century, and they began to do them long before that. Nowadays it has already become an art. People decorate their body, turning it into a canvas. They treat this differently: some people like it, but some do not. Some of us dream of getting a tattoo, but do not have the opportunity to go to a tattoo parlor due to its absence, or for some other reason. And then the question arises: "How to make a tattoo machine yourself?" In this article, you will find tips for making it.
DIY tattoo machine
In terms of quality, it will, of course, be much inferior to the factory one, but nevertheless you can do without the services of a tattoo parlor. So, how to make a tattoo machine and what is needed for this? And you need simple tools that can be found in any home: a gel pen, a guitar string, a motor from a toy or an old tape recorder and a power supply (it will be quite useful from mobile phone). The paste is removed from the handle, its tip is removed. With a regular needle, remove the ball from the tip (by normal pressure). After that, remove the remaining gel from the paste (by blowing it out) and proceed to the second stage. A regular guitar string is used as a needle, which only needs to be sharpened. To do this, you need a solution made from water and two teaspoons of table salt, a nail (rod) and a nine-volt power supply. The minus wire is screwed to the rod, and the plus wire to the string. But it is worth remembering that the string must not be completely immersed in the solution, but a maximum of three millimeters, and at the same time it should not come into contact with the rod. After fifteen minutes of chemical reaction, the string is ready for use. Before making a tattoo machine yourself, you need to prepare its body. To do this, you need to take an already prepared motor and attach an L-shaped holder made of sheet steel or a bent nail to it, in a word, whatever comes to hand. Put the cut out circle (from the cork of the wine bottle) on the motor shaft, which will be responsible for the movement of the needle. After that, you need to attach the assembled handle to the holder using insulating tape after adjusting the needle exit from the handle. But at the same time, secure it to the mug, bend and stick the needle in. Further adjustments are made by moving the handle on the holder. All that remains is to attach the wires to the power supply and you're done. You can use gel as a paint, but it's better to spend money and buy real paints: they hold better. So you got the answer to the question of how to make a tattoo machine with your own hands. The only thing left to do is to choose a drawing and apply a tattoo!
DIY induction machine
The above option assumes the manufacture rotary machine, but there is also induction. It differs in the way it works. It can also be made at home, but iron skills are required. Only the body is made, and the rest of the parts: an induction coil, needles, mouthpieces, must be purchased at the store. I hope this article answered the question: "How to make a tattoo machine?"
To get a tattoo on your body, you do not have to buy an expensive machine or seek help from a professional tattoo parlor. This equipment can be made at home with little effort. If you look back in history, you can see that the first tattoo machine was made by Samuel O'Reilly, who took elements from the equipment for copying documents as a basis to reproduce the reciprocating movements of an electric typewriter.
Initially, it is necessary to prepare all the necessary parts that will make up the future product. This will require:
- helium or ballpoint pen;
- the thinnest string 15 centimeters long;
- motor and bushing, which can be removed from the tape recorder or purchased on the radio market;
- small plastic tube.
For the translational movement of the needle, you need to find a gear that can be taken from the same tape recorder. Its diameter should correspond to the size of the engine shaft. This is necessary so that the gear fits snugly on the shaft and cannot rotate. The final component of the product is an energy source that will create a voltage of 3-5V. To do this, you can use a regular power supply.
Before making a homemade tattoo machine, you need to squeeze a ball out of the paste. The paste itself will act as a guide for the needle. We push the string through the paste shaft. In the event that the string cannot pass through the small hole in the rod, you can cut off the rounded part in the place where the ball was previously located. You can also slightly sharpen the string to make it easier to pass through the handle. Before doing this, you need to make sure that the size of the string matches the length of the rod.
Then we take a plastic tube and bend it over low heat so that an angle of 90 degrees is obtained. We attach the engine on one side of the tube, and the handle on the opposite side. You can fix it with electrical tape. When this stage is completed, it is necessary fasten the string to the bushing... To do this, a loop is made in advance at the end of the string, which must correspond to the diameter of the sleeve.
The loop must be made so that it is not tightly tightened, but, at the same time, does not dangle freely on the bushing. Using a soldering machine, the sleeve is soldered to the gear. In doing so, the correct distance from the sleeve to the center of the shaft must be maintained. This directly affects the depth of entry into the skin of the needle.
It is also necessary to take into account that the smaller the gear is selected and the closer the sleeve is to the center, the more blows will be applied. By moving the handle towards the motor, you can adjust the speed of the blows. If you want to correctly make a homemade tattoo machine, the assembly video will be a good visual aid.
To check the resulting product in operation, you must first prepare a solution based on black ink. To get a more accurate drawing, the sketch of the tattoo is first applied to the skin with a regular pen. During tattooing, there is no need to rush to press the needle against the body so that it can drive enough paint. If an even black cut remains on the body after the machine, then the machine is working properly. Before applying the tattoo, it is imperative to treat all parts of the machine with alcohol so as not to infect the skin under the skin.
Making a tattoo machine yourself, of course, significantly reduces financial costs. However, it is worth taking into account the disadvantages of such a solution. Making a tattoo yourself with such a machine is not very convenient. The process itself can be accompanied by unpleasant sensations. This, in turn, can be reflected in the quality of the picture.
Read also
Most Popular Materials
Elena Flying Tattoos