Hello, dear users of Play`N`Trade. With you matros and today I will tell how to make a fence and gate in minecraft.
How to make a fence and gate in minecraft
In order to craft our items, we need a tree. More preferably. On this we go into the forest and cut down a few trees. Next, we go to the workbench and start crafting. If you do not know how to make a workbench, you can find an article about this on our forum.
First, I will tell you how to make a gate. First, we make four sticks. We lay out the craft as follows: in the first, third, fourth and sixth slot, one stick each, and in the second and fourth, one board each. We get a wicket.
Now let's move on to crafting the fence. For this we need only sticks. We just put one stick in the first, second, third, fourth, fifth and sixth slot (If you want to make more fences, then put a few) and get two fences.
These items may be required for Agriculture in Game. You can make a corral, or a garden. They can also be made from other materials. An iron fence requires six iron ingots. Everything is done in the same way, only instead of sticks we put iron ingots.
There was a sailor with you and today I told how to make a fence and gate in minecraft. Until we meet again and enjoy the game!
If you want to protect your home, garden or pasture from evil thieves, build a fence. Well, don't forget to attach a gate to the fence. So you can always get into your possessions with a couple of clicks. Being fenced, your site will look more solid and more protected. The gate will help to accurately designate the entrance to your property. In this Minecraft game guide, we will learn how to create a gate (gate) on a workbench. For a better understanding of the process, screenshots and step-by-step instructions are attached.
Supported Minecraft platforms
For the current version of the game, creating a gate is possible on all platforms.
How to make a gate in Minecraft - the necessary materials
You will need 2 planks of any wood and 4 sticks.
How to make a gate in survival mode in Minecraft
- Before you start crafting a gate, make sure you have collected all the right materials and there is a workbench. At the workbench, open creative mode. In the current version of the game, it is presented in the form of a 3x3 grid. Creative mode is opened by pressing the right mouse button (or the corresponding key on the joystick).
- Starting to create a gate, pay attention to the location of the ingredients. As you can see in the screenshot above, we only need two creative menu fields. In the first field, follow the following order: 1 unit of material “stick” in the first cell, 1 “board” is placed in the next cell, the last cell must be filled with another stick. In the second field, the ingredients are set in the same order. In this way, you can create a fence gate in creative mode.
- Now, after you have laid out the materials in the right order, a gate will appear in the cell on the right. It will also appear in your inventory. This means that you can put it in the place you need, using the inventory and the key corresponding to your control settings.
How to make a gate in Minecraft - item ID for using console commands
At the moment, the gate ID for the fence is 107.
For example, the command to give a wicket to a player would look like this:
/give @p(player name) 107 1 0
In conclusion, I would like to note that the Minecraft game mechanics defines a gate (gate) as part of a fence. This means that it will not work to jump over it. The attacker will need several hits to overcome this obstacle. At the same time, you can open the gate by pressing the right mouse button. Do not forget to repair the fence and the gate in time and they will save your household from vile thieves and obsessive night creatures.
In this game, the barrier performs the same functions as in life. As in real life, the fence is used to limit the perimeter of the owner's territory, to protect against the penetration of people or animals and just for beauty, so it is very important to know how to make a fence in Minecraft.
At the very beginning of the game, a fence is built to protect your territory from hostile monsters such as zombies, archers and creepers. Just like for monsters, it also serves as a barrier for players. I hasten to disappoint, but your building will not protect against spiders.
In the game, the fence looks like one block high, but in fact, for all creatures, it appears to be one and a half blocks high. Without using special effects or momentum from the explosion, it cannot be jumped over. For other blocks and structures, it remains a block of one height unit. You can be thrown over the fence if an explosion occurs next to you.
Now let's move on to the most important part, the build.
How to make a wood fence in minecraft
To craft a fence, you will need to cut down a tree, split it into boards, and then make sticks out of the boards. Actually, the elements of your hedge are created from sticks.
Open the workbench and place boards in each cell of the bottom and middle row. So the section is ready, or rather, even two.
There are four types of wood in the world: spruce, birch, tropical tree and oak. Fencing elements can be made from each type of wood, and they will differ in color from each other, depending on the type of wood used. Various colors will help you find new solutions when creating your dream home. It will not be possible to create a section from sticks of various woods.
Take a section in your hand and set it in the right place, put the next one next to it, and they will connect. Also, when the section rests against other blocks at the same height, it will connect with them, closing the passage. By placing sections vertically one above the other, you can make a two- or multi-story barrier. For beauty, you can put torches on each column and hang a sign with an inscription. You can make a lantern out of the columns by placing 3 columns vertically one on top of the other, and add a block of glowing stone on top.
In the backpack, the sections stack in stacks of 64, this will allow you to make a fairly long fence without running to the workbench for a new craft. explosion resistance wooden fence exactly the same as wood.
We make a gate and a fence in Minecraft. Video Tutorial
How to make a fence and a gate in Minecraft?
If the fence is an obstacle for everyone, then how can the owner get through it. That's right, you need to build a gate into it. How to make a gate in minecraft Crafting it is very simple.
You will need 4 sticks and 2 boards. On the workbench, put in the bottom and middle rows sequentially: stick, board, stick. Here she is ready. From this set of materials you will receive only one piece. The properties of the gate in terms of height are similar to the fence.
Insert a gate into the gap in the fence. Now, by right-clicking on it, you can open or close it.
How to make a stone fence in Minecraft?
Many people have a question, is it possible to make a stone fence? I will answer no. But it is possible to build a cobblestone wall out of stone, which will perform the same functions. The cobblestone wall looks very epic and is very well suited, both for fencing stone castles, and for building balconies and parapets in the castle itself.
To give your castle even more uniqueness, you can make sections of rare mossy stone. Now your medieval castle will be surrounded by a stone fence interspersed with moss.
Now back to crafting a cobblestone wall. You need to get 6 blocks of stone. On the workbench, you must lay 3 blocks in the bottom and middle rows. From this amount of cobblestone, you will receive 6 sections of cobblestone wall for one craft.
Install two barrier posts side by side, and they will connect into a solid shaft. By stacking the bollards one on top of the other, you will get a tall pole just like with wooden poles. Just like with a wooden fence, you can make it multi-story, put torches and other blocks on it, attach signs. Wooden sections can be placed on top of the stone sections.
A feature of the multi-story stone mur is the ability to shoot arrows through the horizontal gaps between the stone sections. But remember, just as you can shoot the monsters, the monsters will be able to shoot you through the gap.
How to make a stone fence gate in Minecraft?
It is impossible to make a gate out of stone, but you can build a wooden gate into a stone shaft, and it will perfectly fulfill the functions assigned to it. The gate built into the stone row looks very appropriate and even beautiful. In a high multistory stone rampart, you can make several gates one above the other. Apart from beauty, it will not bring benefits. In addition, you have to open and close both of them, which is inconvenient.
How to make a fence from another material in Minecraft?
Yes, indeed, there is another material in the game from which you can make sections of the fence. This material is called Hellstone. It is mined, as the name implies,. During the release of versions, the names have changed. In early versions, hell was called the lower world, and hellstone was called Bloody. Almost the entire solid surface of hell consists of this type of material, with the exception of inclusions of ore and accumulations of glowing stone.
So, you have come a long way in the game and, having built a portal from hell, you have brought a hellish stone. How to craft a hellish fence? Craft here is seriously more difficult. To begin with, the infernal stone will have to be burned in the furnace to obtain the infernal brick. From four bricks on a workbench, an infernal brick block is assembled. Sections are already being made from it.
By laying 3 hellish brick blocks in the bottom and middle line workbench, you will get a hell of a fence. The only consolation is that after such torment you will receive as many as 6 sections of the hellish fence.
secrets
- By installing a stone or wooden pressure plate before and after the gate, you automate the process of its opening and closing.
- When installing a gate in masonry, it moves down 3/16 of a block to match the height of the stone walls.
- With four posts placed in a square and four pressure plates on top, you can build a table.
- Sections can be hung in the air. You can also put torches on the columns hung in the air.
- A wooden fence can be destroyed the fastest with an ax, and a stone one with a pickaxe.
Probably, every Minecraft player sooner or later decides to build his own farm, and it doesn’t matter if you play in a separate world or in multiplayer. After all, a character in Minecraft needs to periodically eat food, otherwise he may simply die. However, building a farm in minecraft is not as easy as it seems at first glance. There are several problems, for example, your plants in the game can be trampled by animals, not to mention the fact that you have to look for seeds in order to plant plants. That is why you need to prepare a special fence and build it around the farm, then the animals will not be able to get into your garden. Moreover, if you surround the farm with a fence, even you will not be able to enter the farm. The door will not interact with the fence, for this the game provides a gate. How to make a gate in Minecraft? Very simple!
To do this, you will need a workbench, 4 units of sticks and 2 blocks of planks. You need to arrange them in the crafting window so that the sticks are in the bottom left and middle left cells, as well as symmetrically in the middle right and bottom right, and place the boards in the middle and middle bottom. Now that you know how to make a gate in minecraft from a fence, you can build the biggest farm and not be afraid that mobs will spoil it.
Types of gates in Minecraft
savvy minecraft players improve almost everything possible devices games. Fence gates are no exception. After the appearance of such an object as a gate in the game, the players managed to improve them and create the following types gate:
Ordinary gate from the fence.
Mechanical gates.
Sliding gates.
Iron gates.
Mechanical gates in Minecraft
About everything in order. First, let's look at how to make a mechanical gate in Minecraft. They are also called automatic.
To create a mechanical gate, as well as for any other mechanical objects, you will need a redstone and a power source for it.
You need to put an activating element, that is, a button, pressure plate, lever or stretch, where you need it. Then you need to connect a power source, for example, a red torch, to an activating element using a redstone. Now, when you, for example, press the button, the gate will open or close itself. This is a fairly convenient mechanism that simplifies the work with the farm.
Sliding gates in Minecraft
Now let's see how to make a sliding gate in Minecraft. This is a very complex mechanism, for the creation of which you will also need a redstone, a power source for it, pushing sticky blocks and an activating element in the form of a button or lever. It is the pushing blocks that will play the role sliding mechanism to the gate entrance.
It is recommended to use sticky blocks so that they return to their place when the gate is closed, when using ordinary ones they will remain open.
So, you need to connect the power supply to the blocks using redstone, and fix the button in the place you need. In this case, when you press the button, the gate will open, and when you press it again, it will close. In the game, this mechanism does not bring any benefit, it is needed only for the manifestation of your creativity.
Iron gate in minecraft
How to make a gate out of iron bars in minecraft. These gates are somewhat stronger than wooden ones and cannot be broken by mobs, but they can only be opened with the help of an activating element: a button, a pressure plate, a lever, and so on. Making them is very simple, crafting is similar to making wooden gates. You just need to use iron instead of planks, and iron bars instead of sticks.
How to make a gate to heaven and hell in creative mode in Minecraft
As you know, Minecraft provides not only gates for the fence, but also those gates that allow you to go to the lower or upper world. For example, a portal to hell is made using obsidian. After the obsidian is located in the form of a closed square, it must be set on fire, for example, with a lighter. Few people know that in creative or creative mode, unlike survival mode, you can implement the gate right away, they are in the inventory.
If you have recently started playing Minecraft, then you are probably interested in how to protect your farm. The fence will keep the mobs away from the dwelling, and also will not let out the animals that you have tamed. Thus, the fence in Minecraft is an indispensable component of your home area.
materials
The world of "Minecraft" provides the most different types fences and fences, which can be made from a wide variety of materials: wood, iron, fence and gate? The easiest way to make them out of wood. There is a lot of it in the district, and it is mined very quickly, so it will do for the first time. So, if you want to put together a fence for yourself quickly, go to the nearest forest and chop more firewood.
Fence
The process of creating a fence is simple to disgrace. For its construction, we need boards and sticks. If you are using the console edition, then the answer to the question of how to make a fence and a gate in Minecraft is even easier. You only need sticks.
Remember that the color of the fence depends on what kind of wood it is made of, so choose the material well so that you don’t end up with a complete bad taste.
The fence in Minecraft is done as follows. All ingredients are placed on the workbench in the bottom two rows. You need to put boards in the first and third columns, and sticks in the central one. As a result of crafting, you will get 3 fence blocks. Thus, it will take 2 sticks and 4 boards to create them.
In the pocket edition, an exclusively oak fence is created from 6 sticks placed in the two lower rows of the workbench. The result of crafting will be 2 blocks with a fence.
pass
Creating a gate is not much more difficult than crafting a fence. For this you will need 4 sticks and 2 boards. Place them on the workbench in the bottom two rows as follows: sticks in the first and third columns, and planks in the center. That's all. Remember that the gate has the same features as the fence in terms of color, height and placement. Having figured out how to craft a wooden gate in Minecraft, let's start looking at other materials that can be used to create a fence.
Behind the stone wall
Now, let's look at how to make a fence and a cobblestone gate in Minecraft. Unfortunately, the gate cannot be made in any other way than what was described above. However, they can be combined not only with a wooden fence, but also with a real stone wall.
To make a cobblestone wall, you need at least six blocks of this material or the same amount of mossy cobblestone, but then finished wall will be covered with moss. To craft a stone fence, place all the cobblestones in the bottom two rows of the workbench, as a result you will get 6 wall blocks.
In addition, you can make a kind of wooden fence from hellish bricks. To do this, go to the infernal fortress and play vandals. The walls of the castle are made of this material. Remember that you will need six blocks to craft a hellbrick fence, not items. That is, if you dig up items that look like ingots, then you still have to make blocks out of them. As a result, it turns out that to create 6 hellbrick fences, you will need either 6 blocks of material or 24 ingots. Kraft is carried out according to the same recipes that were indicated above in the article.
That's all, we hope we helped you deal with the question of how to make a fence and a gate in Minecraft.
Every home needs a fence. If you managed to make a fence, it's time to think about how to enter the site, that is, how to make a gate in minecraft. Despite the fact that the gate is, according to by and large, an analogue of the door, which is installed in the fence, it is crafted according to a completely different recipe, and it opens in other ways. But more on that later. Interesting feature wickets - her ability to hang in the air. True, it will not work out initially, but you can install it on the fence, and then remove the lower blocks.
Now we figured out how to make a gate in minecraft. It's time to learn how to open it. A blow, that is, pressing the left mouse button, will not help here, so you will have to take care of creating special mechanisms. The gate in the game can be opened using a redstone, pressure plate, button or lever. Let's see how to make these blocks.
To make a block redstone, or redstone, you need nine blocks of redstone. The latter, in turn, is mined using a diamond or iron pick from the bedrock - red ore. As a rule, it lies deep enough - at a depth of up to 20 blocks. For creating lever on the lower middle cell you need to place a cobblestone, placing a stick on top of it. The same arrangement of ingredients in the recipe buttons, but here instead of a stick and a cobblestone, two blocks of worked stone are used. To do pressure plate, place two blocks of processed stone or wood in the lower left corner of the field.
How to lock a gate in minecraft?
Making a gate in minecraft is certainly good, but if it is not locked, it will not protect your site from enemy mobs. How to privatize this block? Everything is quite simple here: enter the command “ /cprivate» and right-click on the gate.
For security and attractiveness, any housing must be fenced off. To craft a fence, you only need sticks. Moreover, from six sticks, two blocks of the fence are obtained. The fence performs not only a decorative function. It cannot be jumped over by hostile monsters or by the player. Now you need to make a gate so that the player can freely enter and exit.
How to make a gate in Minecraft video
The gate, as well as the gate, are analogues of the door, but their crafting is done in a different way. You can learn more about the process of creating a gate on the video:
Unlike doors, they do not open with the left mouse button, but through the use of a lever, redstone, button, pressure plate. However, the gate can also be opened with the right mouse button. The gate may hang in space if, after its installation, all blocks located around are removed, including those that are placed under the gate. However, it continues to perform its functions.
Read also:
How to make a gate in Minecraft
To create a gate, two blocks of boards will come in handy, as well as 4 sticks. At the same time, two blocks of boards are vertically located in the central part, and two sticks are placed vertically along the edges. If the gate is closed, it prevents both hostile mobs and the player from entering the fenced area. It is impossible to jump over the gate, its height is equal to the height of the fence and is 1.5 blocks. The gate is sometimes used as a window, since in the closed position it will not allow mobs to reach the player, and in open position it is easily used as a loophole - through it you can attack hostile monsters. Some players go further. Hanging the gate with a picture, they mask the secret passage in this way. Installed instead of a conventional door, the gate provides greater strength and reliability. The gate, unlike the door, is not able to be knocked out by zombies.
A huge number of mobs will constantly try to enter the territory of your property. This is how they are programmed in Minecraft, so you have to deal with them somehow. The easiest way to do this is by building walls and fences. The more barriers, the higher the reliability, although the mobs are not able to overcome even a single fence, so the rest of the layers of defense are just a precaution. But at the same time, pay attention to the fact that you yourself will not be able to climb over a fence or wall, so you will have to learn how to make a gate in Minecraft.
Using an element
To protect yourself from mobs, you need to build a fence or build a wall. By this you protect yourself and your property from an invasion that will leave absolutely nothing behind. But it remains very important question about how to make a gate in Minecraft, because without them, not only the mobs, but the character himself will not be able to overcome the obstacle on the way. This is the whole essence of the gate, which, by the way, is also called a gate by gamers, since, in their opinion, this design does not pull on the gate. In any case, you need to put them in order to be able to enter and leave the house (in the case of doors) and leave your territory (in the case of a fence). Installation is a simple matter, let's take a better look at how to make a gate in Minecraft, because they will be very useful to you, and the sooner you craft them, the better.
Gate manufacturing method
It will hardly be a discovery for you that the gate has its own recipe. After all, this game is based on the principle of crafting according to recipes. So, if you want to understand how to make a gate in Minecraft, then you will need to stock up on wood. From it you will craft sticks and planks that will be useful to you in the creation of many other items.
Now we are talking about the gate, so let's look specifically at its recipe. Open the workbench and arrange the ingredients as follows: in the central cell, as well as in the one below it, place two boards, and install sticks along the edges of them. As a result, it turns out that to create one gate you need two boards and four sticks. The recipe is incredibly simple and affordable, you can craft wickets from the very beginning of the game, so there shouldn't be any problems. Now you know how to build a gate in Minecraft. It's time to talk about some of their features.
One and a half blocks
Both the fence and the gate visually represent one block. Therefore, many players wonder if they can be easily jumped over. After all, everyone knows that both the character himself and all the mobs have jumping ability for one block, but if two are installed, then it will not work to overcome them. But there is one secret here: the fact is that, like the gates themselves, they are not single, but one and a half. This means that visually they look about the same as single ones, but neither you nor the mobs will be able to jump over them. This feature makes the gate a very important protective element, because you can pass through it, but the mobs of doors and gates cannot open, so this path is not available to them. Now it becomes completely clear how important it is to know how to craft a gate in Minecraft.
No gaps
Some players may get the impression that the player will have the wicket. After all, it will stand out against the background of the fence, which is not very aesthetically pleasing. Anyone who strives for beauty in everything, including Minecraft, can breathe a sigh of relief, because the fence block is connected to the gate. This is a property of some items in the game - when placed next to each other, they merge into one common element. For example, you can take a chest: if you put two of them side by side, they will turn into a long storage. Thus, you can create a chest ten blocks long. The same thing happens with the gate - they are combined with the fence, creating an integral structure. Therefore, no one's aesthetic sense will be hurt.
Another plus
By the way, beauty lovers can use one feature of the gate to build a more impressive fence. The fact is that the gate remains hanging in the air if the block on which it was installed is knocked out from under it. This means that you can create a gate twice as high as the original, and nothing prevents you from increasing the height of the walls. Thus, a larger barrier will be obtained. As mentioned earlier, mobs will not be able to overcome the fence, since it is one and a half, but this technique has more effect on aesthetics. In addition, with its help, you can use any, even single blocks, to create a barrier, since you will place them on top of each other, thereby preventing the mobs from jumping over them. And this, in turn, opens up much more wide opportunities when designing their own defense complex.