To create such a masterpiece, you will need patience and perseverance. But if there are helpers in the case, you can do it much faster, and a swan made from ordinary plastic bottles, also with your own hands, will look like a real one.
Master class on creating a swan from plastic bottles with your own hands
In order to make this product, you will need the following, quite affordable and common materials:
- Old car tire (diameter 55cm).
- A piece of foam plastic measuring 25x15x10.
- Putty and paint (color white, red, black)
- Corrugated waste vacuum cleaner (length 80 cm)
- A rod made of easily bendable and durable material (length 2m). It is not recommended to take metal, it is best to take copper.
- Plastic bottles (40-45 pieces).
- Construction mesh (size 45x20 with pointed ends).
- At the very beginning, you should make a swan body, for this we need a car tire. After cutting it in half, cut off 10 cm from one end. And connect both halves so that they are in the shape of an egg.
- From a piece of foam, you need to cut out the head and beak. Details should be processed with sandpaper so that all irregularities disappear.
- Make a hole a few centimeters deep on the back of the head of the product (the neck will be attached to it). Process the resulting sandpaper.
- Apply the putty evenly over the entire head. Let dry, bring to perfect condition with fine sandpaper.
- After that, cover the corresponding parts of the head with paint and let dry. The hardest part of the job is done.
- Thoroughly clean the corrugation, preparing it for painting. Make cuts for attaching the head of the product.
- Attach the corrugation to the body and head, covering the rod.
- Paint the plastic bottles and mesh that will be used to make the feathers and tail. White color and let dry.
- Cut the bottle into pieces, forming bird feathers. About five feathers usually come out of one bottle. On either side of the pen, make four holes into which the mesh wire is inserted.
- Connect the feathers with wire in such a way that it is not visible, laying them on top of each other.
- The tail of the bird is made the same way. Feathers cut from plastic bottles are simply screwed onto the mesh.
- Before you start connecting the parts of the swan, you need to choose a place where it will stand. There you need to install car tire, bricks or board.
- Connect the body with the neck with self-tapping screws.
- Bend the rod for easy strengthening into the ground.
- Connect the wings with wire and rod.
- Attach the bird's head to the corrugation with rods.
A wonderful and majestic swan is ready.
Video tutorials on the topic of the article
You can get additional information about all the details of this process by watching a video on how to make and install a planter swan figurine in your garden.
By doing everything right and patiently, you will definitely achieve an excellent result. And your swan will be just amazing.
The swan has always been a symbol of beauty, grace and grace. Making a swan out of plastic bottles with your own hands is easy. Although you need to show perseverance, patience and spend a little time, then a beautiful swan made from simple used plastic bottles will be a great decoration for a garden or cottage.
This article will present a crafts master class, describe two techniques for making a swan with detailed instructions supported by photos and videos.
Here are some photos of what a swan should look like:
The stage of creating a composition
First, it is important to choose a place in the garden or in the country in which the swan will stand. Such original bird used as a tub for flowers or other plants. The name of this craft is a cache-pot swan. Amazingly effective and functional item.
First technique
For crafts, you will need materials such as:
- Five-liter large plastic bottles;
- 0.6 millimeters of iron wire;
- Metal mesh to make bird wings;
- putty;
- Putty roller;
- White bandage;
- Tassel.
It is necessary to cut the bottle in half, and bend the wire and give it the appearance of the number two, make a hole in the bottle cap and insert the wire. Strengthen the structure with special glue for ceramics, and in order to make the product stronger inside, fill it with stones or broken bricks. Fill the hole with wet sand.
How it works? Under the pressure of the sand, the bottle should become more rounded and take the shape of the body of a bird.
The workplace for working on crafts should be covered with cellophane. At the next stage of work, it is necessary to make a putty solution. To make it easier to sculpt the swan, you need to make the solution thicker. In order to make the bottom of the product, the first layer of putty must be spread directly on the cellophane.
Put the bottle on top of the solution and gently smooth the layers with a spatula.
The next step is to blind the bird's neck. To do this, you need to start coating the wire with putty. Start from the bottom and do it with wet hands.
Similarly, coat the entire bottle with a spatula, a thick layer of two centimeters.
To make the wings of a bird, you need to bend the mesh into the shape of a wing, attach the bottle to the side and press down, fix it with putty. Wait for the solution to set.
When the putty has set, smear the bird's wing with the solution with your hands.
While the wings are drying, you need to coat the bird's neck.
During the working process, wrap with a wet white bandage.
It is required to form the tail of a bird. To do this, bend part of the grid at an angle of 40 degrees and hold it with a solution. Then hold the head and leave the product to dry for 30 minutes.
From the bottom of the tail, make a roundness at the bottom of the tail.
Make the upper part of the tail in several stages.
View of the tail from above.
Side view of the tail.
When the blank for the swan is ready to dry, you need to plaster it, paint it with white paint and varnish it.
A beautiful swan is ready!
Second way
For crafts you will need the following materials:
- White liter bottles exactly 25 pieces of plastic and one bottle of 500 milliliters;
- Five-liter transparent bottle;
- One easy-to-bend plastic bottle, volume five liters;
- Three meters of thick wire;
- Women's elastic tights;
- Sintepon and bottle caps;
- Fishing line and wire;
- small pebbles;
- Red fabric for the beak;
- Scotch;
- Buttons for the eyes.
First you need to prepare the bottles. Remove the neck, corks, rings, peel off the labels. Next, you need to cut the bottles, but before cutting, draw clear lines along which to cut.
Cut a half-liter bottle, remove the neck and cork. Make cuts to the cone of the bottle. Make the first cut along the casting seam. Next, make a beak, melt the ends of the clothespins and pin two holes with an awl. With adhesive tape, collect together the two halves of the clothespin. Make the body of a swan from a 5 liter bottle.
Next, you need to assemble the product. Bend a thick wire into two pieces and pass through the wire in the bird's head. Put a synthetic winterizer in the head and string corks alternately with 6-petal parts on the wire.
This is what the neck should look like:
To strengthen the body, you need to pass the neck part of the wire through the bottom of a five-liter bottle and bring it out through the hole in the lid. To stabilize the product, fill the bottle with stones. Make a tail from the ends of the fishing line. Cut and reinforce the feathers with synthetic thread.
The craft of the majestic swan is ready!
Video on the topic of the article
Easy videos on how to make a beautiful bottle swan.
Often made very beautiful craft- do-it-yourself swan for the garden. Now it is very fashionable to decorate your home with crafts. handmade A: It is elegant, popular and beautiful. The garden deserves special attention. A swan and a flower bed, for example, carry the energy of the owner and bring him success, because it is not in vain that such great attention is paid to this.
Figures of swans made of wood, clay or tires can decorate any suburban area.
Particularly demanding people can make a decor element to their liking, adding designer highlights and a personal vision of decoration to it. Yes, and the fruits of their own labor are pleasing to the eye and pride. An unbridled desire to create can turn into a masterpiece of art. Thoughtful inventors have adapted to make sculptures from improvised materials. This is considered a trendy, ecological direction in decorating. Without special material and time costs, you can make a unique decoration for the garden.
The swan is the embodiment of all positive qualities and characteristics, therefore many wish to have his sculpture in their garden. The high cost of finished products and doubts about their quality and service life make you think and put your imagination into action.
Materials for manufacturing
To make a sculpture of a swan for the garden, improvised materials are used. These can be damaged rubber tires, tires, plastic bottles, spoons, bags, wood, stones, Construction Materials and aids.
Swans can be assembled from petals cut from plastic bottles.
Very famous options for crafts from plastic bottles, which are durable and versatile in use. Used tires can be used in a similar way, you just need to cut and paint the material correctly. Such sculptures can carry practical value, because they can act as a pond, flower garden or flower bed, but it is also an aesthetic decoration that emphasizes the theme of the garden. Plastic bags do not have a long service life, but can compete with other materials.
Wood is a less used material that requires skill and dexterity. It is available for use only by qualified professionals. Stones, due to material costs and physical effort, compete with other materials, but are distinguished by durability, refined style and elegance. Construction batches can be useful in this matter, because they are affordable and affordable; special attention should be paid to gypsum and cement mortars.
Back to index
Rubber tire swan
old car tires you can give a second life by finding them a great use in the garden. So, one of the fairy-tale characters can be made from them. A rubber tire swan is the most affordable and economical way to decorate a garden, because old tires will also come in handy here. Probably, everyone met one of these in crowded houses. So, to make a swan from tires, you should acquire a tool. First you need to prepare the work surface, lay it out so that you can work without polluting either the product or the workspace.
The next step should be the direct selection of the material. You should choose the most worn tire with a longitudinal pattern for ease of working with it and painting finished product. Next, you need to thoroughly clean it from any dirt, dust and other interference in operation, dry it. So, we prepared the material for further processing.
Then you should mark the surface of the tire into parts and cut it with a jigsaw along the contour. For the manufacture of the product, you will also need a metal rod, drill, wire and pliers. These improvised tools can be found in any owner.
Marking is carried out on an already cleaned wheel. Initially, it is necessary to draw the outline of the future swan with chalk and cut it out with an electric jigsaw. You can use sharp knife, Bulgarian and others handy tools. At the same time, it is important to remember about safety and not to neglect elementary rules in order to avoid injury and other troubles. It is best to move from head to tail in parallel lines for the convenience of using auxiliary tools. The edges of the trim must be processed - smooth with a knife or grinder.
Then it is necessary to turn the product inside out and form the body of a swan, the bend of the wings and neck. This will help to make a metal rod or wire fixed at the base of the tail and along the body. Then you need to give the product appearance, painting it in certain colors, highlighting the beak and eyes. Installation of the work is the final stage of production. To do this, you can use another tire or hemp.
We fix the swan and decorate with lush vegetation, colorful flowers. It is known that in nature swans are devoted lovers, therefore it would be appropriate to make a pair of swans. They will perfectly decorate a garden, a pond, a flower bed, an abandoned stump and complement the decor.
Back to index
Swan in the garden from plastic spoons
Plastic spoons are a very cheap and durable material. So, you need to stock up on plastic spoons of the same color, preferably white, clean them and prepare for work.
A swan for a summer residence can be made from plastic spoons.
First of all, you need to make a swan frame, on which the spoons will be attached.
It can be made from a plastic bottle or wire and wrapped with bags, paper and tape, shaping.
Then you need to form a silhouette of a swan, pointing its head, beak, spreading its wings, and glue the silhouette with spoons inside to the product.
This will create the effect of plumage and decorate the appearance of the craft. The beak must be highlighted in a different color, draw the eyes. You can fix the product on a stump or other part of the garden, providing for windy weather and rains.
Back to index
Putty garden swan - the most convenient and beautiful way, since initially the product has a snow-white color, and you can form wings and plumage yourself, making the product as similar as possible to a real swan. For this you need to take:
- putty knife;
- putty;
- plastic 6-liter bottle;
- water;
- bandage;
- metal rod;
- metal mesh;
- brushes;
- film.
To make a putty swan, you will need an iron rod and a large plastic bottle.
Initially, we will prepare the working space: spread the film, knead the solution, lay it on top of the film - this will be the base on which you need to place a plastic bottle on top, cut so that the lid remains in place and fixes the metal rod, neck and head of the swan.
Pour filler into the bottle - earth or sand, depending on the purpose and vegetation inside the sculpture. Make a hole in the lid and fix a curved metal rod - the future bend of the neck. Next, knead the putty and apply it evenly from the base to the neck, forming feathers with your fingers, attach a metal mesh in place of the wings, giving a natural bend. Then, with our hands and a brush dipped in water, we sculpt the wings and smooth out the roughness.
The neck deserves special attention. To fix the putty on a metal rod, it is necessary to tightly adjust it with your hands and fix it with a bandage. From above, evenly apply a thin layer of putty with a brush.
We form a bend, beak, tail, let the product dry well, attach solid color acrylic paint, draw a beak and eyes, if desired, fix with varnish. The swan is ready to decorate your garden. It remains only to plant flowers, fill with water or other filling. It is important not to be afraid to experiment, to test all decor options, to embody fantasies. The same goes for the plaster swan.
In this article, we will talk about how to make a swan with your own hands from improvised materials, five-liter plastic bottles will serve as the basis for the design. Probably every person will agree that swans are on garden plot, in principle, they look quite romantic, and if functional qualities are added to romance, there will be an indispensable composition in general. Below is a method for making swans, which will serve as excellent flowerpots.
To make the creation easy and not burdensome, we need:
- Large plastic bottles with a face value of 5 liters;
- putty;
- Metal mesh, for the manufacture of wings and tail;
- Twisted two to four times thick wire or metal rod;
- Polyethylene film;
- Putty knife;
- Brush;
- Bandage.
After all our components are ready, you can begin work on manufacturing.
Stages of work on the manufacture of a decorative figurine of a swan
Figurine base
We cut the bottle lengthwise so that one side has enough space for planting flowers. This detail will be the body of a swan, so to give it roundness, fill it with wet sand.
Screw the bottle with a lid, check the fit and then insert a wire or metal rod, slightly bending it, like a swan's neck.
Take part of the putty, put it on a pre-prepared film in an even layer 5 centimeters thick. From above, on the putty, put and press the bottle tightly. Any excess that rises, gently smooth up the bottle. It is most convenient to do this operation with a spatula. Remember, in order for the putty to stick to the work surface, the spatula must be periodically dipped in water. 
The bottom of the flowerpot is ready and it's time to start making the swan neck.
Neck making
You need to wet your hands, take a small amount of putty and roll a roller out of it. Next, gently press the resulting roller into the base - a wire or a metal rod. In order to fix the putty roller, immediately after pressing it, wrap it with a small piece of wet bandage. This is how the whole neck is molded. Do not forget that obligatory element is a thickening of the transition from the torso to the neck; without it, the craft will look unnatural. Upon completion of these works, a head with a flattened beak is molded.
Gradually coat the entire body of the resulting swan with putty, smoothing uneven areas with a wetted brush. Remember to constantly wet your hands.
Next, the wings and tail are made.
Press a metal mesh into the putty on the sides and hold for a while. It is necessary to wait until our future wings stick. Next, very painstakingly, with wet hands, we form wings from putty. The technology is simple: with one hand, from above, putty is applied to the mesh, with the other hand, it is supported from the back side. Using the same technology, a swan's tail is made from mesh and putty.
The figurine is ready. Now you need to wait a couple of hours until it hardens and move it for a few days to a place where it will not be exposed to direct sunlight and rain. When the swan is completely dry, it must be processed with mesh plaster sandpaper and then with ordinary fine sandpaper.
Priming and painting
After smoothing the surface, we treat the entire surface with a primer. It is she who will allow us to very carefully paint our crafts with paint. For painting, it is best to choose enamel paint, although, of course, ordinary paint is also quite suitable. facade paint. Don't forget to draw the eyes and color the beak. For additional protection you can varnish the swan.
That's it, the work is finally done. Can fill container fertile soil and plant beautiful flowers.