How to remove a plastic door? Detailed instructions for removing balcony and entrance plastic doors and replacing hinges.

How take off plastic door

In the near future, the installation of plastic and metal-plastic doors is gaining momentum. But in order to operate, repair and regulate them, you need certain knowledge and abilities.

Hinges for plastic doors – their main component – ​​have a complex structure. If you understand the hinge structure, then you will simply understand how to remove a plastic door.

• The hinge consists of the iron insert of the door part;
• the frame part, in which the pins for fastening are integrated;
• spacer sleeve, which is located between the frame and door parts.

The hinge components in a plastic door are designed to ensure a tight fit of the door to the frame, free and smooth opening and closing of the door.

By adjusting the hinges, you can move the door slightly in any direction. Why is this necessary? If you need to achieve a tighter fit of the door, for smooth operation of the lock or lock. Here we take a closer look at adjusting the plastic door.

• Horizontal adjustment is carried out using a hinge template (iron tab).
• Vertically, you can use special adjustment screws hidden under decorative caps.

Needs lubrication at times door hinges to increase the reliability, strength and durability of the product.

Highlight different types hinges, which are determined by the fastening of the hinge on the profile, the type of door, and the requirements for hinges. You can distinguish between costly and applied loops.

For plastic doors to the balcony, an expensive type of hinge is used. When installing, you need to pay close attention to the correspondence between the location of the loop fastening and the installation location of the iron amplifiers located in the PVC profile.

Butt hinges are used for pendulum plastic doors, which are installed in places where there is a lot of human traffic. Such hinges are combined with the function of an automatic closer, which closes the doors without human effort. Installing the closer on iron door It works according to the same principle as for plastic.

What to pay attention to when choosing hinges

When choosing hinges for plastic doors, take into account the following points:

• what is the design of the frame and sash profiles,
• is the amplifier in the profile,
• what is the thickness of the profile walls,
• the size and weight of the sashes,
• how the doors will open.

If all these points are taken into account, then the selected hinges will last a long time and provide better job doors. Most importantly, of course, they are very durable and reliable; the material used is Teflon. But there are also bad fittings with defects. Then the question may arise about removing the plastic door to replace the hinges.

How to remove a balcony door(1)

We kindly ask the viewers who benefited from my video, in solving the problem, please review...

How to remove a plastic window sash

How take off plastic window sash or doors: https://www.youtube.com/watch?v=gnlzb9UrwTQ Greetings everyone! In that

The design of the door is designed in such a way that, at a technical level, it does not cause huge difficulties in replacing a failed hinge. You can use the following tools - pliers or side cutters, a puncher and a hammer. It would be great to study the instructions in advance, which will describe the installation of hinges on doors. Then, after removing the door, you can immediately begin replacing the hinge without wasting time, knowing the sequence of actions.

How to remove a plastic balcony door

• First you need to remove the caps that cover the hinge mechanism.

Now you can carefully place a punch or hammer and slowly knock out the axial mechanism. At the same time, the door should be closed, but not completely closed (by turning the handle).

A part of the axial mechanism will appear at the bottom of the loop; it needs to be grabbed with narrow pliers and pulled down until it completely appears from the groove.

Then you need to tilt the door towards you. Because she is very languid, you need to firmly hold the door. Raising it a couple of cm (about 5), the lower support pin is released. In plastic doors, the lower hinges are not secured by anything, so when you lift the door and move it to the side, it simply comes off.

After which you can begin replacing the old loops with new ones according to the instructions. Having changed everything necessary, you need to return the door to its original position.

To do this, lift the door again by approximately 5 cm and place it on the support pin.

Then the lower hinge spring is inserted into the support pin. Again, the door is not locked one hundred percent by turning the handle, but must be closed all the way. The axial cylinder is inserted from below into the hinge hole, taking into account the flat edge on the cylinder.

By now pressing upward on the cylinder itself, its uniform exit from the loop mechanism is achieved. Naturally, it should not come out completely, but only peek out 5 mm on both sides of the loop above the edge of the top loop.

The door installation ends with the installation of decorative plugs.

How to remove a plastic entrance door

Removing the plastic entrance door from its hinges occurs a little differently, because... These doors have differences with balcony, interior and other plastic doors. The entrance doors have a reinforced structure and no double-glazed windows. The hinges in such doors are also different, because... here you need reinforced hinges and special anti-burglary devices.

There are no longer two hinges in the front door, but three, because the frame design door leaf more rigid. As the weight of the door increases, the load on the hinges also increases. Due to the enormous pressure on the hinge design elements, the possibility of hardware failure increases, which happens quite often. Available fittings quickly break down, and there is a need to replace them.

It is worth noting that plastic entrance doors can be removed by analogy with ordinary plastic doors.

The only difference is that you can’t handle it alone - the door is very heavy, and it’s better to call a helper to help you.

Metal-plastic doors are becoming increasingly popular, and they are even heavier than just plastic entrance doors. Therefore, metal-plastic entrance doors have hinges with stronger and reliable design. But with its design the loops are metal plastic door in fact, they do not differ from the design of an ordinary plastic door, although there is an additional load on their parts and components.

It turns out that the design of the hinges of metal-plastic doors is similar to the reinforced hinges on plastic entrance doors.

It can be noted that if the design is not different, then the method of removing the door will be virtually the same. Therefore, to resolve the issue of removing a metal-plastic entrance door, you need to use the above procedure.

Information on how to properly remove a plastic balcony door from its hinges will be very useful for every homeowner. A similar need can arise in any home at any time. In order not to spoil the structure, it is important to know some rules for performing this work.

Plastic door hinges differ significantly from conventional door fittings.

Plastic doors are installed almost everywhere today. In apartments and private houses they are part of the balcony block, and in public places and offices they serve as an entrance door.

The design of the plastic doors themselves is not very different from ordinary ones. Here, too, the main parts are a box and a canvas attached to hinges. Their number is usually 3-4 pieces, which allows you to evenly distribute the load. The material itself combines polyvinyl chloride and metal carcass.

Door blocks are most often complemented by a glass insert, so be extremely careful when working. It is best to carry out dismantling and reinstallation with an assistant who will support the door and insure you.

The loops are located at an equal distance from each other. The upper and lower elements are attached along the line of the box. To prevent the fittings from attracting attention, camouflage plastic caps are placed on top of the hinges. So the design looks complete and neat. All fasteners are hidden under these linings.

Plastic doors are very popular and are used almost everywhere

When might it be necessary to dismantle the door leaf in a PVC balcony block? Basically, this situation is associated with repair work in the premises or the structure itself. For example, knowledge of how to remove a plastic door may be needed in the following cases:

• Breaking. If any part of the fastenings fails or moves, the door needs to be adjusted. Sometimes this requires removing it from its hinges.
• Replacing a door or part. You may have to face a problem when you need to completely replace the hinges or the canvas as a whole.
• Repair work in the premises. In order not to stain or damage the structure, you can cover the door with cellophane, but sometimes the best solution is temporary dismantling.
• Expansion of the opening. This refers to the situation of simply removing a door, for example, when moving furniture.

In any case, you need to not only carefully remove the canvas from the hinges, but also then be able to put it in place or install a new structure.

Most often, removal of the plastic door is required when carrying out repair work.

Let's look at how to properly remove a plastic door from its hinges. The whole process can be divided into several stages:

1. Removing the pads. First you need to open the hinges, that is, remove the protective caps from them. To do this, you need to close the door, but do not lower the handle down, and then pry the trim with a screwdriver and bend the plastic.
2. Disassembling hinges. In order for the mechanism to loosen, you need to press the loop in its upper part so that the protruding pin drops down. This way it will come out from the bottom. To completely remove the axle, grab it with pliers.
3. Removing the canvas. Grasp the canvas well and tilt it slightly towards you. Then lift the door up. The loops should come apart. Be careful, as the weight of the structure is considerable.

Removing a plastic door from its hinges

When all the necessary operations have been completed and there is no longer any need for an empty opening, it is important to correctly install the door in place. To do this, you essentially need to perform all the manipulations described above, but in reverse order:

1. Insert the fabric into the opening so that you can put it on the hinges on top. The bottom loop serves as a guide, but it is important to maintain a level position to prevent distortions.
2. Place the bottom loop on the support pin and adjust the position of the remaining elements.
3. Place the door in the closed position without locking the lock. If you turn the handle, the blade will move and you will not be able to put the remaining loops on the axle.
4. Place the axial cylinders of all hinges in place and press the pins from below so that its edge goes up until it clicks. The edge of the pin should return to its original position and protrude about half a centimeter from above.
5. If necessary, tighten the hinges to align the door diagonally.
6. Put the decorative caps back on and check how the design works.

It is not always necessary to remove the door leaf when problems arise in the design. Modern plastic doors in a balcony block can be easily repaired on site. To do this, you need to turn to tools such as a screwdriver and a hex key.

First you need to remove the protective caps from the hinges. Pry them off with a screwdriver and bend them away. They may be the cause of poor door functioning. In order to correct this problem, sometimes it is enough to lubricate them. If a skew is detected, the position of the blade must be adjusted. To do this, you need to make the necessary adjustments in the hinges using a screwdriver or hex wrench. They have special holes hidden under the caps. With the help of such simple manipulations you can repair the structure with little effort.

In order to avoid problems with the door again in the future, you should lubricate its parts and correctly adjust the position of the door leaf. Periodically check the condition of the structure and correct problems as they are identified.

Almost every room has plastic doors. They are popular because characteristic features and low price. Behind installed model maintenance is required, and in some cases dismantling of the canvas is required. Before removing the plastic entrance door from its hinges, you need to familiarize yourself with step by step instructions for its dismantling.

The difference between the models is the material used for their production. Previously, the canvas was made from ordinary plastic, now it is used polymer material, for improved sound and heat insulation.

Used to make the frame metallic profile, withstanding heavy loads. Corner elements fortified metal brackets, which makes the model more reliable.

Where are plastic entrance structures installed:

• entrance to a private house;
• exit to the balcony;
• shops, kiosks;
• office rooms;
• separate room in a large warehouse;
• industrial premises.

Attention! In input models metal sheets are installed.

Entrance structures made of plastic are heavy. Therefore, rigid hinges are installed on them, which can be made with the addition of Teflon.

They are divided into the following types:

• removable;
• fixed;
• screw-in;
• card;
• invisible.

The loop consists of the following components:

• a part that is attached to the opening part;
• a frame part having pins;
• bushings that transfer the load from the blade to the box.

The plastic model contains the following elements:

• lock;
• pen;
• rubber seal;
• closers;
• bolts.

Threshold plastic construction can be framed, reinforced or aluminum. Depending on the type, it has different purposes.

Design

If you need to remove a plastic door from its hinges, you should know its design. Exist following types plastic models:

• swing - opening and closing is carried out using the standard method;
• pendulum - opens in one direction or another;
• carousel - going in a circle;
• sliding - moves only along the installed guide;
• sliding - the product goes into a niche in the wall;
• lever - used in the garage, warehouse;
• accordion door.

There are combinations where PVC is used with inserts of glass, aluminum, and steel. Many models are made with a metal frame, and also include locks and fittings. There are display glass inserts. The decor is made using dyeing or lamination.

Door removal instructions

To service the doors, it is enough to lubricate the mechanisms - no dismantling is required. However, there are cases when you can remove metal-plastic door from loops is a necessity:

1. Parts need to be replaced. To replace parts or accessories, remove the canvas.
2. Mechanical destructive impact (for example, the canvas is cracked).
3. Indoors goes major renovation. The doors are removed for safety.
4. Installing new furniture or removing old furniture from the room so that the door does not interfere or get damaged.

Door hinges are a mechanism that must be handled with care. Dismantling is carried out according to the instructions:

1. Remove the cover from the hinge at the bottom and top, remove the protective caps. To perform this procedure carefully, the canvas is pressed against the box, but not closed. The cover is removed by slightly prying it with a flat tool.
2. To loosen the loops, press at the top on the pin that secures them. He goes down. It must be picked up with a tool and pulled out - pliers are used for this.
3. After the pin is pulled out, the hinges are released and the doors can be removed.
4. The structure is tilted towards itself and raised. If everything is done correctly, then the hinges are disconnected and the canvas can be removed freely.

The weight of the canvas is large. This must be taken into account when removing it in order to correctly calculate the applied force and not drop the door.

Required Tools

For dismantling you need the following tools:

• set of screwdrivers - figured, straight;
• hex keys;
• pliers or pliers;
• finisher;
• crowbar

When working with tools and plastic, you must be extremely careful and act in stages. By applying brute force, you can break the canvas - then it will need to be completely replaced.

Installation of plastic doors today is a ubiquitous phenomenon. IN residential buildings they are part of the balcony block, and in administrative or public institutions they serve as entrance doors.

Structurally, plastic doors are not much different from their wooden or metal counterparts. Here the box and the canvas, hung on 3-4 loops, are also the main elements door block. The material used to make a plastic door includes a metal frame covered in polyvinyl chloride.

The door hinges are placed at equal distances from each other, the lower and upper elements are fastened along the lines door frame. To remove a plastic door from its hinges, you need to know their structure.

The hinge of such a door consists of a tab made of metal, a frame part with fastening pins and a spacer bushing located between the door and frame parts. Adjusting the composite hinges allows you to move the door slightly in the desired direction, ensuring it fits snugly against the frame and operates smoothly. In the horizontal direction, adjustment can be made using a loop template, and in the vertical direction - with special screws, which are masked with decorative caps.

There are two main types of hinges depending on their fastening to the profile, the requirements for them and the type of door: these are applied and overhead hinges. For plastic doors of the balcony block, overhead hinges are used. During installation, it is important to match the places where the loop is fixed and where the amplifiers are installed, which are located in PVC profile. Applied type hinges are used when operating swing doors, which are installed in places where there is an active flow of people. Such hinges can perform the functions of an automatic closer, with the help of which the door closes without human intervention.

The material used to make plastic door hinges is Teflon, which makes them reliable and strong. But sometimes you come across defective fittings, which can force you to remove the plastic door from its hinges to replace them.

Removing the door from its hinges

Thanks to good design plastic door, replacing a faulty hinge does not cause any special technical problems. For work, you can use pliers, a hammer and a hammer.

Before removing the plastic door, you need to remove the caps covering the hinge mechanism. Then use a hammer to carefully knock out the axial device. In this case, you should not close the door by turning the handle; it should only be closed. When, when knocking out the bottom of the loop, part of the axial device appears, it must be pulled out of the groove using pliers. After this, the door leaf should be tilted towards itself. When it is raised by 2-5 cm, the lower support rod will be released. Bottom loops in PVC doors are not fixed. Therefore, by lifting the balcony door and moving it to the side, the panel can be easily removed.

You can remove the plastic entrance door using the technology described above. But its design has its own characteristics. The entrance doors are reinforced, their hinges are reinforced and have anti-burglary devices. There are not two, but three hinges on the front door. This is due to the fact that the frame of the front door leaf is more rigid and as its weight increases, the load on the hinges increases. Lift the heavy one alone front door very problematic. Therefore, it would be wise to hire an assistant for such work.

Reinstalling the door

After carrying out repairs, you need to install the door in its place. To do this, you need to perform all the steps described above, but in reverse order:

• You need to place the plastic door leaf in the opening in a convenient way to install it on top of the hinges. The reference point should be the bottom loop. To avoid distortions, it is important to keep the door level.
• The lower loop should be placed on the support pin and the location of the remaining elements should be adjusted.
• Then you need to set the door in a closed state, but without closing its lock. Otherwise, when turning the handle, the blade may move and then it will not be possible to put the remaining loops on the axles.
• After this, all the axial cylinders of the hinges must be put in place and pressed from below on the pins so that their edges come up until they click. The edges of the pins should be in their initial position and protrude outward by 0.5 cm.
• If necessary, the door position can be adjusted by tightening the hinges.
• On final stage installation, put decorative caps on the hinges and check the operation of the door.

For trouble-free operation of the door elements door hinges It is recommended to lubricate or apply graphite shavings to them.

Hide

Plastic doors require maintenance at least twice a year. This procedure includes lubrication and adjustment of moving mechanisms. Quite often it is necessary to remove the sash, however, how to remove a plastic door from its hinges , Not everyone knows. This is a simple procedure that you can learn.

Application and design of plastic door

Plastic structures are very often used in various residential buildings, used in office premises, in production workshops. That's why knowing how to unhinge , can be quite useful. It is worth noting that plastic doors, regardless of their application, have a similar design, and the leaf will be removed in the same way.

It is necessary to dismantle the door, if such a need arises, following certain rules, otherwise the structure may be damaged. Before you take it to the balcony , you will need to carefully study its design, this will help you understand not only how the door hardware works, but also how it is removed. First, find out which hinges are on your door. They may be structurally different from each other.

Most plastic doors have a similar design, which is not much different from the design of a regular one hinged door. The main part of any door is the frame: it is attached to the walls of the room, and the door leaf is screwed to it using hinges. It is very important that the door is installed level, only in this case the leaf will fit tightly to the frame, preventing cold and moisture from entering the room.

Plastic doors are structurally slightly different from conventional hinged hinges; they are held on a special pin that can be unscrewed, and it is not found in a regular hinged hinge. wooden door. Pay attention to how many hinges are installed on your door: usually there are three, less often four.

Many designs have glass insert, this not only significantly increases their weight, but also makes them more fragile, so you will need to be careful when removing the sash. It is most convenient to do this together.

Hinges for PVC doors are screwed at an equal distance from each other. This is important, since this arrangement allows you to evenly distribute the load from the weight of the door leaf and avoid sagging hinges. The lower and upper elements are usually located on the line of the box. They look molded, but they are not: in order to get to the hinge holding rod, you only need to remove the plastic decorative caps.

When is it necessary to remove the door?

Property owners do not always have to think about how to remove a plastic door; more often than not, maintenance is available without disassembling the structure, but in the following cases the door will have to be removed:

• Some fasteners have failed and require replacement. To replace and adjust some parts, an action such as removing the plastic balcony door is required.
• The canvas is damaged and requires replacement, or one of the hinges needs to be replaced.
• Indoors renovation work, it is necessary to protect the door from contamination, accidental damage, it prevents large objects from being carried into the doorway.
• Moving furniture. It makes sense to remove the door so that it is not in the way, then install it in place.

How to remove the door correctly?

Door hinges for plastic doors are a rather delicate mechanism, so you need to handle them carefully. Removal of the canvas should proceed as follows:

The weight of the sash is large enough, do not drop it. It is better to act with an assistant.

Methods for caring for loops

If for some reason you have removed the door from its hinges, do not rush to put it back. The hinges may need some care, so taking advantage of the moment to treat them will not be a bad idea. To do this, you need to know how to lubricate the hinges of a plastic door correctly.

• Rinse the removed structure from debris and dust that has accumulated in it. This can be done using gasoline.
• The surface must be wiped dry and any remaining dirt removed.
• After this, you can lubricate the structure with a special lubricant. It could be solid for loops or liquid, which is sold in specialized stores. The second option is the most convenient, as it is packaged in a convenient grease container, which makes it convenient to apply lubricant. This can be done even if the door is in place.

To lubricate the hinges and mechanisms of a plastic door, you must use only special oil; you should not use substances not intended for this purpose.

If you need to remove the door from its hinges, you can easily do it yourself. The procedure will not take much time. Hanging the door back is also not difficult; you will need to proceed in reverse order.