Before removing traces of adhesive tape from a plastic surface, you should study the material itself. A specific remedy is applied to each species. Not everyone can withstand the effects of aggressive substances. You need to be careful with the adhesive base of the tape. Using cleaning powders may leave deep scratches on the product. After dust settles on them, dark spots form.
There are many improvised tools that make it easy to cope with traces of glue on plastic surfaces. However, during the removal process, you need to remember that it is easier to clean fresh spots. Inveterate pollution is much more difficult to cope with..
Oil stain removal
Before removing traces of adhesive tape on plastic using vegetable oil, you need to make sure that it is possible to wash the surface of the remaining oil stains.
The remnants of the glue, mixed with oil, change their structure and are subsequently removed with plastic products without a trace. Apply the product to the place of contamination. Important that it be horizontal planeotherwise the oil will leak.
The steps are as follows:
- moisten a napkin with oil;
- attach to contaminated surface for 2 hours;
- after removing the wipe, wipe off the stain with a rag;
- wash the plastic surface with soapy water.
School gum - Another option for removing adhesive from adhesive tape from plastic. With its help it is easy to remove even old traces.
Work as if you are erasing traces of the stylus from a sheet of paper. Make a small effort so as not to push through the plastic. When finished, gently brush off all the dust.
The disadvantage of this method of removing glue can be attributed to the complexity of the work. Especially if a large spot is located on the window frame.
Scum of plastic with alcohol
White Spirit - Another effective answer to the question is how to wipe the tape from furniture. The drug is inexpensive, but it does its job well.
95% ethyl alcohol not only cleans the plastic window well, but also copes with the elimination of yellowing.
Before applying the drug to a contaminated surface, it is necessary to check the reaction of the plastic. To do this, select a remote area on the window and apply a small amount of alcohol to it. Low-quality plastic can negatively react to such a procedure. If no material changes follow, feel free to start work on the entire surface.
To understand how to clean plastic tape from tape, 
need to study the properties of solvent and gasoline. The solvent has the ability to degrease the surface. Work with him must be done carefully. You can not water them with a large surface. Apply it directly to the place of contamination using a cotton swab. After some time, the glue will loose freely.
How to clean tape from plastic is known to those who refuel lighters themselves. A good tool for dissolving the adhesive base is gasoline. Put it on a cloth and wipe it with a dirty place. The glue will move quickly. Pros: quick drying and lack of traces of gasoline. Minus - the need to ventilate the room.
Hair dryer and soap solution
Direct a jet of hot air from the hair dryer onto the remaining glue: Under the influence of heat, it softens and easily wipes off the surface. However, you should pay attention to the amount of heating, since under the influence of temperature the plastic can melt.
Fresh glue stains can be removed with laundry soap. Dissolve it in hot water. Use the solution when it cools down a bit and becomes warm. Dip small plastic items in a container of soapy water. After a while, remove and wipe with a rag.
A non-standard option is to remove traces of adhesive tape from the plastic surface using another tape. This method is usually used at the very beginning, and if it does not give a result, then resort to others.
The procedure is as follows:
- cut a strip of tape;
- cover them with a stain;
- with a sharp movement, peel off the strip so that dirt is removed along with it;
- repeat the procedure several times until the desired result is obtained.
All these methods improve appearance surface, but not always completely clear it of glue. This happens because they are not aggressive substances and do not completely dissolve glue.
Using acetone or nail polish may cause paint to wash off. Therefore, it is better to use washing liquids for glasses. It is also allowed to use dishwashing detergents.
Costly methods include decal removers. They are produced in the form of aerosols, they well remove pollution from the surface and do not affect plastic.
During cleaning, it’s not clear how to wipe double-sided tape from plastic. There are also certain methods for this:
Before starting work, examine the surface and check its reaction to a particular substance. This is to understand you understand what means can be used and which not.
Attention, only TODAY!
Adhesive tape is a universal fixing packaging material, which, unfortunately, leaves unpleasant sticky marks on the surfaces of objects. Moreover, it is quite difficult to eliminate these spots. They not only spoil the appearance of the product, but also darken over time.
In addition, dirt and dust stick to these places. Let's look at how to remove traces of tape for short term and without harm to the material.
Universal methods
- It is not surprising, but tape can remove another tape. To do this, stick a new adhesive tape on the desired area and sharply peel off. Repeat the procedure if necessary;
- Soap solution is a gentle product that removes fresh traces of scotch tape from clothing, textiles, and small items. Soak the product in warm water with diluted soap and wash or wipe the desired area with a cloth with soap and water. Add a little soap to prepare liquid soap or a piece of solid soap grated on a coarse grater. Stir the composition until foam;
- Sunflower, olive or rapeseed oil is perfect for removing traces of scotch tape, glue, various labels, barcodes and price tags. Put oil on a sponge and wipe the surface, leave for ten minutes and wipe the area with a napkin or a cloth with soapy water and then wipe dry. Such a tool is suitable for all surfaces except wood and;
- The school eraser delicately removes traces from a wooden, plastic and hard surface without scratches, stains and other harm to the material;
- Special products for removing labels and stickers, traces of glue and adhesive tape. Manufacturers offer aerosols and sprays that are sprayed in the right place and wiped with a damp cloth. After the procedure, there will not be a trace of adhesive tape or glue !;
- Solvents, which include white spirit, nail polish remover, acetone or refined gasoline (used in lighters), degrease the surface, making it easy to wash off traces of glue or tape. Such products are suitable for cleaning clothes, curtains and curtains, upholstered furniture and clothes. Use caution with solvents for hard surfaces;
- Baking soda mixed with vegetable oilremoves traces from masking tape and ordinary tape as well greasy spots on household appliances or plastic. In this case, the product does not leave scratches on the surfaces, like ordinary powders, abrasive compounds;
- Ammonia or acetone is applied with a cotton pad to the damaged area. It is great for plastic surfaces, especially for. But alcohol and acetone cannot be used for painted or varnished products.
How to remove traces of adhesive tape from plastic
White spirit, a school eraser, vegetable oil or a hair dryer for drying hair will help remove traces of adhesive tape on plastic. In the latter case, dry the desired place with hot air and then wash the area with soapy water or a normal damp cloth.
How to clean the plastic, if necessary, restore the plastic surface and get rid of yellowness, read.
If you use white spirit or refined gasoline, mix the solvent with water, blot a cotton pad in the resulting composition and wipe the sticky residue.
Leave the product on for about ten minutes, and then remove it with a damp cloth or napkin. Use only a weak solution, otherwise plastic coatings may be damaged due to the aggressive effects of funds.
Easier ways are to use a school eraser or wet disinfectant wipes. A disinfectant in a few minutes will destroy the adhesive base and help get rid of the label.
Sprinkle sprinkles problem spot salt and then wipe with a cloth. The eraser also removes the glued paper, and the remnants of the label are removed with a light cloth dampened in soapy water.
For plastic surfaces, aerosol WD 40 is used, which is usually used for processing locks and lubricating various mechanisms. However, this composition will clean the surface of traces of adhesive tape, as it quickly penetrates the structure of the material, loosens the adhesive composition, disinfects and cleans the product.
Spray the product at a distance of ten centimeters from the surface and leave for ten minutes, then rinse with a damp cloth.
Peanut butter can also be used for cleaning. Apply the oil to a sticky place, wait two to three minutes and then rinse with soapy water. Instead, you can take more affordable vegetable or olive oil.
How to remove traces of tape from furniture and clothes
Many universal methods will help to clean the marks from adhesive tape on furniture. The choice of method depends on the material from which the furniture is made or processed. For polished surfaces and upholstered furniture use sunflower oil.
The product is applied to a cotton pad and carefully lubricate the desired area. The oil is left for ten minutes, then washed with soap and water and wiped the furniture with a dry cloth.
For all types of furniture, clothes, curtains and curtains, tablecloths and other textile products, solvents are suitable, including white spirit, nail polish remover, acetone or refined gasoline (used in lighters). These products degrease the surface, which makes it easy to wash off traces of glue or tape.
After this treatment, furniture should be cleaned with a damp cloth and soapy water or with a special cleaning agent for furniture upholstery. And things must be washed.
Remember that you cannot use oil for unprocessed wood products! Such a tree absorbs the product well, as a result, greasy spots remain on the surfaces. With caution, solvents for polished and painted surfaces can be used.
Traces of tape on windows and a car
To wash traces of labels or scotch tape on a car, use special car cleaners. In addition, you can heat the required area on the machine with a hairdryer or steam, and then remove the adhesive. Since it melts when heated, cleaning will be quick and easy.
Get rid of the usual or double sided tape Essential oils, especially eucalyptus or tea tree oil, will help on windows and glass. Such tools are also used for glass and porcelain dishes, tiles and ceramic tiles.
The glass surface can also be cleaned with vinegar, acetone or alcohol. Treat the desired area with the product, rinse with a detergent for glasses, windows and mirrors. Then wipe with a damp cloth and wipe dry. But such compositions are not suitable for tinted car windows!
How to clean other surfaces from adhesive tape
For cleaning a washing machine, refrigerator, microwave and other household appliances use vinegar, alcohol and acetone, liquid products and sprays for washing windows. First, apply vinegar, alcohol or acetone to the desired area, leave for a few minutes and then rinse with detergent.
Vegetable oil, a school eraser or heating with a hair dryer also removes adhesive tape from household appliances. By the way, here the method of cleaning the tape with another tape may work.
Baking soda is suitable for dishes. In a pan with hot water Dissolve a glass of soda and let go of the product. Leave for half an hour, then rinse the products with dishwashing liquid and rinse thoroughly in clear water. By the way, soda will remove not only traces of scotch tape, but also greasy spots, severe pollution.
Whatever activity we are engaged in, almost everywhere we will find the use of adhesive tape. We seal them and insulate the windows for the winter, use when moving and transporting. However, there is also back side medals: stickiness of adhesive tape, due to which traces remain on various surfaces.
Scotch tape properties
Adhesive tape is a strip of synthetic material on which a special adhesive composition. The latter provides the main property of the product: the possibility of adhesion to hard surfaces different textures. The strength of the fastening largely depends on the thickness of the glue and its composition. The larger it is, the proportionally higher the stickiness of the tape. There are many varieties of scotch tape: clerical, packaging, technical, construction, medical, protective, decorative, etc.
Today in the production of adhesive tape 2 types of adhesive are used:
- rubber glue;
- acrylic glue.
If the adhesive tape is created using the first, it can be used at an air temperature of -25 to +50 ° C. acrylic glue It is used at temperatures from -5 to +40 ° C. As a film on which the substance is applied, paper, PVC, foil and polypropylene tape can be used.
Scotch tape has the following properties:
- Ecological cleanliness.
- Strength.
- Unlimited shelf life.
- Elasticity.
- Protective function. Scotch tape can serve as an insulator, preventing the penetration of odors and moisture.
How to remove stains from adhesive tape
Each type of surface has its own method of removing glue. The faster we get rid of it, the easier it will be. Otherwise, the adhesive tape “sticks” to the surface and becomes tan.
Removing traces from various surfaces
From stains left with duct tape on various sitesYou can get rid of using the following tools:
- petrol;
- alcohol;
- acetone;
- white Spirit;
- solvent B-646;
- vegetable oil;
- eraser;
- detergents;
- soap;
- another tape (using mechanical action);
- special tools.
Photo gallery: how to remove traces of adhesive tape
Vegetable oil is suitable for washing off traces of adhesive tape on any hard and leather surfaces (except those that absorb liquid) 
If the surface to be cleaned is able to withstand high temperatures, heat the contaminated area with a hairdryer before removing any adhesive tape. 
The eraser removes traces on any surface where it is possible to rub it properly Acetone is able to cope with cases where pieces of adhesive tape remain on the surface Traces of adhesive tape on furniture can be cleaned with ordinary household soap Medical alcohol is recommended by many housewives as a means to clean any enameled home appliances 
Using solvent B-646, stains can be removed. of different origin
White spirit will remove traces of adhesive tape from any plastic surface Gasoline will allow to remove the remains of adhesive tape from any furniture 
Conventional dishwashing gel, foamed in hot water, can help get rid of old stains.
If the surface is plastic, then first you need to check how aggressive the preparations can be.
The easiest and most universal way is the use of sunflower oil. Take a piece of bandage or any other non-lint cloth. Dip in oil and grease them with the area we need with glue. You can even pour a small amount of the product on the surface itself and leave it for a couple of hours. Here you do not even need to apply mechanical stress. Oil itself will change the structure of the glue, and we can only wash it off with a soap solution.
Gasoline has the same property. The principle of its operation is similar to the use of sunflower oil. But it is toxic and leaves an unpleasant smell.
Gasoline and sunflower oil work great not only on plastic, but also on glass.
Glass is a resistant material, therefore use chemicals to remove stains will not hurt him In order not to erase the gloss and top coating of the product, experts recommend testing both options on a small and inconspicuous surface area.
Due to its stickiness, adhesive tape sometimes leaves traces on various surfaces. For example, when moving, we fastened the doors of the cabinets and the refrigerator with what we found at hand. There was no masking tape in the house, so clerical was put into use. After removing it, traces of glue appeared on the furniture.
When we removed spring tape with plastic windows, stains remained from it. In addition, the glue is thoroughly dried and hardened during the winter. In this case, a regular hair dryer helped us. When we directed hot air onto the traces of glue and held it for about five minutes, the glue softened. After that, it turned out to calmly wash the windows with soap and water and a sponge.
When buying a washing machine and printer 1/4 required surfaces were sealed with a metallic sticker. She not only spoiled the appearance of the goods, but also interfered with the operation of the devices. It was decided to remove these stickers, but they left behind a thick layer of glue. In the case of the printer, tape helped us. Since the glue was still fresh and not old, we removed it with the sticky side of another device of this type. The adhesive tape was pressed firmly to the surface and abruptly torn off.
Do not use solvents or abrasives on plastic surfaces: they can ruin it There were problems with dried glue on a washing machine after removing the sticker. It was possible to remove it only with the help of a hairdryer. The dried glue was softened with hot air and the residual was removed by the working side of the masking tape.
White spirit will help remove traces after double-sided duct tape. He will cope with both removing the adhesive tape itself and getting rid of the sticky trace left after it. You just need to soak an old rag in the liquid and gently rub the contaminated area. After that, removing the track is not difficult. White spirit is a great helper to remove stains from double-sided tape from plastic, but this tool is not suitable for delicate surfaces or painted products.
The most toxic drugs to get rid of adhesive tape are acetone, alcohol and solvent. After using them, it is necessary to thoroughly wash the surface with soap and water and ventilate the room.
We tried to remove the glue residue after the stickers with the product logo on microwave oven nail polish remover. Practice has shown that the trace is removed poorly, and the cotton pad soaked in a liquid sticks to the surface. Same bad experience was with cleaning plastic box In bathroom.
Currently in stores you can buy specialized tools to remove traces of tape. For example, MEGAM-S fluids (up to 300 rubles per 500 ml) and PROSEPT Duty Scotch fluids (about 1800 rubles per 2 liters) have proven themselves well.
Duty Scotch Aerosol effectively removes traces of glue, adhesive tape, stickers, markers, inks, oil products, oils, fats, tar, soot and soot Video: how to remove traces of glue from stickers, advertisements and adhesive tape
Precautions
Almost all of the above tools for removing traces of tape are included chemical elements. Toxic fluids should be used with caution and the following rules must be observed:
- use away from sources of fire;
- wear neoprene or PVC gloves;
- do not allow the product to reach the mucous membranes and skin, otherwise rinse big amount water (glasses are recommended for eye protection);
- store in the manufacturer’s container with a tightly closed lid at a temperature of -30 to +40 ° C;
- avoid direct sunlight.
Adhesive tape is a useful invention, without which it is simply impossible to do in everyday life and in production. But this adhesive tape, in addition to many advantages, has one drawback - it leaves marks on various surfaces that are quite difficult to remove.
Adhesive tape on furniture
How to remove traces of tape on furniture, while not ruining it? There are several pretty effective ways solutions to this problem:
- White spirit or gasoline removes glue well from lacquered and polished furniture. But stains can form from these substances and persistent unpleasant odors remain.
- A safe way to remove traces of tape is to heat it with a hairdryer. Subsequently, the pollution is rubbed off with a swab dipped in vegetable oil. The furniture oil is washed off with ordinary soap. It does not damage the coating and does not leave marks or scuffs.
Any essential oil purchased at a pharmacy will help remove glue without special efforts. The mechanism of action of essential oil is a violation of the adhesive properties of adhesive tape. Sticky traces are wiped off with a damp cloth and the oil remaining on the surface disappears.
- The easiest way to clean the surface of glue is to use a soap solution and hot water. foaming in hot water and moisten them with a sticky place. After a few minutes, the remaining tape can be easily removed and the surface wiped dry with a cloth.
- From upholstered furniture, traces of adhesive tape are removed with acetone. They process the upholstery, wipe it with a rag soaked in soapy water, and then dry it with a dry cloth.
Scotch on plastic
You can remove traces of adhesive tape on plastic in the same ways as on furniture:
- Effective remedies are White Spirit and refined gasoline. A cotton swab is moistened with a solvent and a sticky place is gently rubbed with it. It is recommended to pre-test the effect of the solvent on small area plastic.
- You can remove traces of adhesive tape from plastic using dishwashing gel or vegetable oil.
- Having put a lot of strength and patience, you can wipe the glue from the plastic with an ordinary eraser.
Baking soda will help to solve the problem. It is mixed with a small amount of water until a pulp is obtained, applied to a sponge and wiped stains. Finally, wash the surface clear water and dried.
- A hard plastic surface can be cleaned with a powder.
- Special pencils and liquids allow you to remove the remnants of adhesive tape from household appliances.
Scotch on glass
For the winter, some housewives seal the cracks in the windows with tape, and in the spring they cannot completely remove it from the glass.
Simplest and affordable remedy - a screen wiper. It is applied to the sticky area, left for a while, and then wiped the glass with soft paper.
You can remove the trace remaining on the glass from adhesive tape with nail polish remover, alcohol or acetone. The smell of solvent will quickly evaporate, and household chemicals will not damage the glass.
Universal technical aerosols - an excellent tool to remove glue from the glass. At present, there is a special tool “For Removing Labels” that sells adhesive tape well.
Scotch on clothes
You can remove traces of tape on clothes with acetone, alcohol or gasoline. The cotton pad is moistened in a solvent and rubbed with a contaminated area.
If the stain does not go away the first time, the cleaning procedure is repeated again. After the glue completely disappears, the clothes are washed with any detergent. It is better to refuse the use of vegetable oil, since it will only spoil the good thing.
Before proceeding with the cleaning, it is necessary to check all the labels on the clothes so that chemicals Do not damage the fabric.
When all means have been tried, and the trace of the adhesive tape still remains, you can try to remove it with the same adhesive tape. To do this, take a new piece of adhesive tape, stick to the stain and tear it off sharply.
To wash glue from sticky adhesive tape from plastic and any other surfaces in the house and car, use folk gentle means: vinegar, ammonia, hair dryer, adhesive tape; aggressive ones: acetone, gasoline, white spirit or the special “Mr. Muscle”, “Mr. Proper”. Apply to the cloth, treat the surface and wash off after 5-10 minutes with soapy water. If you clean fabrics, pour them on synthetics or cotton, soak for about 10 minutes and wash them manually with laundry soap.
Scotch is the most useful thing in everyday life and industry. It is used for restoration, marking and packaging of items, so every person is faced with traces left by the adhesive. To quickly remove stickiness, it is important to know how to wash glue from adhesive tape from plastic, furniture, rubber and parquet folk or special meanswithout damaging the surface.
The best tools to remove adhesive from adhesive tape
Scotch tape is a tape treated with a layer of cheap acrylic and glue.
When it is removed from the surface, part of the adhesive remains, so it is important to remove it, but without scratching the coating.
Note ! The longer the tape came into contact with the furniture panel and linoleum, the more stickiness remains on them, and as a result, the cleaning process becomes difficult.
The most popular products that clean various surfaces from tape are:
- aerosols or emulsions, such as "Mr. Muscle", "Mr. Proper";
- soap solution;
- dry detergent;
- scotch;
- vegetable oil;
- medical alcohol, vodka;
- ammonia;
- eraser;
- white spirit solvent;
- petrol.
By these means you can wipe off the adhesive tape, clean the surface from dirt, stains, so you can get rid of the sticky layer and restore the furniture / parquet originality.
Removing adhesive tape from various surfaces
Before choosing a method for removing adhesive Velcro, determine the material of which the surface is made. The most harmless and universal way to remove adhesive tape is to use a soap solution, another adhesive tape or an eraser, but if the adhesive sticks to the surface, these methods are not enough.
We remove traces of tape with soapy water
Soap solution will remove minor impurities from Bologna, plastic, aluminum surfaces, metal.
The latter must be painted to withstand corrosion.
To perform a cleaning:
- Rub ¼ \u200b\u200bof the bar of laundry soap.
- Dilute in 250 g of water.
We clean it with tape
The same adhesive tape will help to remove a small amount of adhesive.
The method is effective only when processing hard surfaces:
- Cut a small piece of tape.
- Glue to the sticky layer.
- Tear off sharply.
Considering that the new adhesive tape will contact the surface for 2-3 seconds, it will not leave any traces, but will remove the remnants of the sticky layer. To finish the procedure, treat the surface with soapy water.
Erase adhesive tape with an eraser
The eraser wipes off minor spots from the tape without leaving a mark.
The method is suitable for cleaning dark and light surfaces, the impact of the eraser does not affect their structure / coloring, so they often.
Rub the sticky layer on the laminate, wood furniture, plastic panels, windowsill. Most of the stickiness will be wiped off without a trace. If the method is not effective enough, complete the treatment with soapy water, and when useless, use other means in accordance with the type of surface to be treated.
Note ! It is safe to clean paper surfaces only this way. Other recipes will result in paper slackening and spoiling..
We wash double-sided tape
It is also simple to wipe the glue from double-sided tape, because the tape is made of the same acrylic glue, but processed from 2 sides. The difference is that it glues two surfaces in contact with it. For cleaning, treat 2 items with any convenient way.
We remove the adhesive tape from plastic, mirrors and glasses with folk remedies
Usually she manages to soak in outer layer plastics, and the large scale of manufacturing labeling makes cleaning difficult. Often, sticky marks remain on new doors with glass insert and mirrors. To wash glue from adhesive tape with plastic, use folk remedies: detergent, gasoline, acetone or vegetable oil.
Detergent
Prepare a soap solution using liquid or dry detergent, adding it to the water, foam and rub the contaminated areas.
Gasoline, acetone
Gasoline and acetone are harmful to the body.
Processing can be subject to safety precautions: open wide window framesput on latex gloves and a respirator to protect the airways and hands. Follow the scheme:
- Apply a little to a clean cloth.
Substances dissolve the sticky substance and contribute to its instant separation from the plastic surface. In conclusion, be sure to rinse off the remaining gasoline and acetone with clean soapy water. In this way, leftovers are also possible.
Vegetable oil
Despite the fat content, vegetable oil changes the structure of acrylic and glue, which contributes to the rapid elimination of stains.
For this:
- Apply oil to the cloth.
- Process plastic doors or windows.
- After 20 minutes, remove the dissolved glue with the oil by wiping with a soapy rag.
Repeat if necessary. Using the same principle, we clean glass and mirror surfaces. The proposed funds will not damage their structure. After treatment with vegetable oil, wash the glass / mirror with a wiper and rub to a shine. .
How effective is vegetable oil in relation to sticky spots from adhesive tape, see the video:
We wash wooden, varnished and polished furniture
Clean the kitchen wood cabinet, table, chest of brown, beige, white or black can be white spirit, essential or vegetable oil, a hairdryer. Be sure to pay attention to the coating. If furniture is varnished, use any method. A surface that does not have a glossy layer is strictly forbidden to be treated with oils, because they damage the material, leaving greasy stains that cannot be removed.
We remove stains on furniture with white spirit
White spirit is an aggressive substance that removes other corroding spots.
For cleaning:
- Apply the product on a cloth.
- Wipe off the contaminated surface.
If you clean the cover from the sofa / chairs, allow the product to soak into the fabric for about 5-10 minutes and wash the treated area thoroughly to.
Note ! Be sure to provide an influx into the room fresh air, protect the skin and respiratory tract from the chemicals from which the product is made.
Vegetable or Essential Oils
Treat any contaminated surface with any oil and rinse off after a few minutes. Clean essential products with paper towels. Then for a few more days the furniture will emit a pleasant citrus or mint flavor.
Hair dryer
To clean your home furniture fit ordinary hair dryer for styling and drying hair:
- Blow the contaminated surface.
- Wipe the melted glue.
This method can be used to clean many types of surfaces, since the hairdryer does not have a harmful effect. For wood materials and iron, use regular or building hair dryer.
Attention! Plastic stretch ceiling, leather furniture does not tolerate high temperatures, so do not use professional equipment in relation to such panels.
We clean furniture upholstery or carpets with ammonia and vinegar
If a child has pasted tape on the palace or the cover of the sofa, its villi will stick together, forming a hardened stain.
Having discovered the results of such a prank, and tearing off the adhesive tape, immediately start processing until the old glue has begun to collect dust and create a favorable atmosphere for the development of pathogenic organisms.
For such materials it is convenient to use vinegar and ammonia:
- Pour the sticky fingerprint over (copiously).
- Leave to acidify for 30–40 minutes.
- Wash off with soapy water.
So you can remove not only sticky spots, but also.
Vinegar and ammonia can be used both individually and together, mixing 1: 1. In the latter case, you will receive a highly effective product used to clean clothes, plastic panels, furniture (varnished, polished, unprocessed), leather. Also with this solution you can tidy up your computer or phone monitor. Dampen a cotton pad in the product and wipe the display.
How to wash tape from the refrigerator, linoleum, parquet
You can wash the refrigerator by any method described above, as well as vodka, medical alcohol or alcohol made on the basis of isopropyl.
For processing:
- Wear gloves to avoid overdrying your skin.
- Dampen a piece of cloth in the selected product.
- Wipe contaminated areas.
The advantage of alcohol is its safety in relation to the coloring of parquet, laminate and refrigerator. But after processing, wash the floor or household equipment with a soapy solution, because alcohols, after prolonged contact with the surface, discolor them. .
Alcohols are well suited for cleaning ceramic tiles, sockets, car body, walls.
Note ! To make sure that alcohol does not damage the surface of linoleum or parquet, treat the inconspicuous area and rinse off. If you have low quality material lying on the floor, it may not have a protective coating, which will prevent it from resisting alcohol.
How to remove the remainder of adhesive tape from rubber and other elements of a car
To wash off traces of old or double adhesive tape on a passenger car: windshield, dashboards, hood, rubber, wing, headlights and paintwork can:
- vegetable oil;
- ammonia;
- vinegar
- soap solution;
- scotch tape;
The use of white spirit, gasoline, acetone and similar solvents is strictly prohibited on paintwork surfaces. They are processed folk remedies or VDshkoy (WD 40).
How to remove adhesive traces from the wallpaper
Wallpaper cleaning is a painstaking process. Most optimal option - warm the tape with a hairdryer, but if you do not have this device, remove the remaining sticky substance from the tape by dampening a cotton swab in:
- vinegar
- ammonia;
- soap solution;
Moisten a contaminated area and gently treat with a damp cloth after 20 minutes. Wipe off traces of old tape on paper wallpaper much harder than vinyl or non-woven. To accurately remove the sticky layer, use solvents, making sure that they do not damage the print of the wallpaper, having previously tested it on an inconspicuous area.
Note! About qualities various wallpapers and the means that can be used to process them in the material: .
Natural or synthetic fabrics
To clean synthetic clothes either natural fabric, the suitcase from the adhesive, it is enough to wash it in soapy water (manually) or treat it with folk remedies. Acrylic adhesive, which is part of the fabric, does not stain or eat into the structure, so there is no need to resort to aggressive solvents.
We clean surfaces with special tools
If you use household cleaning, she will help in this case.
Thanks to the funds released in the form of an emulsion or aerosol, you will clean any surface: wood, chipboard, plastic, glass, parquet, linoleum, car accessories, oilcloth, and a stick of adhesive tape.
Adhesive removal is carried out as follows:
- Spray contaminated area with chemicals such as Mr. Muscle, Mr. Prop, or pour emulsion on a sponge, wipe the surface.
- After 5 minutes, rinse with plain water.
Removing sticky stains with these tools is as simple as folk ones. Many housewives who leave reviews on the forums resort to the use of improvised means when cleaning involves washing tape. Leave special cleaners for more serious dirt, and remove minor spots from adhesive tape with cheap products to save on cleaning the entire house.
Larisa, June 27, 2018.