Acrylic bathtubs have a number of important things that make them very popular. Such products can be easily damaged if they are processed using aggressive mixtures. Acrylic bathroom care includes a range of important rules and you need to know which tools can be used and which cannot.
How can an acrylic bathtub be cleaned?
Many people prefer to clean using folk recipes that are safe, both for the product itself and for a person. Be sure to wear individual protection during such procedures. There are several effective and affordable folk recipes for proper care:
- Fights stains well Toothpaste and it is better to take it with a whitening effect. Apply a little paste on dirt, and then rub with a sponge and rinse.
- If the surface of the bath turns yellow, then take care of it with a solution, for which mix equal amounts of hydrogen peroxide and ammonia. Apply the mixture with a sponge, rub and rinse everything thoroughly.
- Minor stains can be removed with laundry or baby soap. Apply it to a rag and then clean the surface.
When caring for an acrylic bathroom, follow a few rules:
- Keep the product clean at all times and avoid serious contamination. If you carry out preventive cleaning once a week using a soap solution, then special tools may not be needed.
- Proper care implies that after each use it is imperative to rinse the bathtub and dry it well by wiping the surface with a rag.
- When cleaning, do not use hard sponges and brushes, which can damage the surface.
- Caring for acrylic bathtubs at home involves rinsing the surface hot water, which will preserve the gloss of the coating.
- To prevent the formation of rust, watch out for taps, from which water must not drip.
- If you put bowls and other metal items in the tub or wash animals, then be sure to put a mat on the bottom to protect the surface.
- In the care of an acrylic bathroom, disinfection is a mandatory procedure, and it should be carried out once a year. Fill the container with water, which should have a temperature of about 20 ° C. Add disinfectant, stir and let sit for 10 minutes. After that, drain the water and rinse the surface with a shower.
Can an acrylic bathtub be cleaned with baking soda?
It is allowed to use baking soda for cleaning the acrylic surface to remove soap deposits. Note that you need to use food grade powder, not calcined. It is important not only to understand whether it is possible to wash an acrylic bathtub with soda, but also how to do it:
- Apply baking soda to a damp sponge and rub it lightly with your fingers to soften the particles. After that, rub the dirt and leave for 1-1.5 hours. Rinse the product from the surface with a weak solution of vinegar.
- Proper care indicates that fresh rust will be removed by a mushy baking soda mixture, which should be applied to problem areas and rubbed well. If the stains are old, then use table salt, which should be applied to the stain and rubbed over with a sponge dipped in turpentine.
- In order to cope with significant contamination, it is necessary to mix baking soda and soda ash with water to obtain a slurry. Rub it problem areas and leave for a while. Mix in 0.5 tbsp. industrial bleach and vinegar, then apply on top of the previous coat. Leave for 30 minutes, rub with a sponge and rinse big amount water.
- For proper care, take 15 g of baby soap and grate it on a fine grater. Fill it with 0.5 l hot water and leave until the soap is completely dissolved. As a result, after about 10 hours, thick cream... Add 100g baking soda and, if desired, 10 drops of citrus ester for the scent. Mix well and use. Apply the finished cream to problem areas for half an hour, rub with a sponge and rinse with water.
Can an acrylic bathtub be washed with vinegar?
Table vinegar is a popular household cleaning product. It can also remove lime. Caring for an acrylic bathroom is carried out as follows:
- Only 7% vinegar can be used to whiten and remove plaque. Add it to the bath using about 2 L of the solution. It must be left for 10 hours, but no more. If you do not follow these rules, then microcracks may appear.
- There is another way than to clean the acrylic bathroom from yellowness, for which prepare vinegar 9% and borax, which is known for its excellent whitening properties. These components must be mixed in equal amounts. V ready mix dampen the sponge and wipe the dirty areas. When the process is over, rinse the vessel. clean water.
Can an acrylic bathtub be washed with whiteness?
One of the most inexpensive and effective products used for cleaning plumbing fixtures and proper care is whiteness. It has been used for more than a dozen years and it is difficult to meet a person who is unfamiliar with its characteristic unpleasant pungent smell. Who does not know, whiteness is bleach diluted with water. For an acrylic bathtub, care excludes the use of whiteness, since it is aggressive in its effect and can damage the surface. To avoid ruining your bath, it is best to use a different cleaning method.
Can the acrylic bathtub be washed with washing powder?
The list of products that cannot be used in pure form to care for acrylic products includes washing powder. The thing is that there are small solid particles in it, and they can scratch the surface, and the bath will get dirty even faster. For those who are interested in how to clean an acrylic bathtub, home remedies need to be carefully selected and in the case of a powder, it can be used to prepare a soap solution, which removes minor contaminants.
Can an acrylic bathtub be washed with citric acid?
Safe folk remedy, which copes well with lime and whitens - citric acid. V proper care cleaning acrylic bath is carried out according to the following scheme:
- Dissolve the acid in water, keeping in mind that there should be one standard sachet for 2 liters of liquid.
- V ready solution dampen a sponge, treat stains and leave for 20 minutes.
- After that, repeat the wetting, and treat the base surface. All that remains is to wash it off.
Products for the care of acrylic bathtubs
The best way to deal with dirt on the bathtub is special products, which are presented in a wide range in household chemicals stores. When deciding what means to wash an acrylic bathtub, it should be borne in mind that some manufacturers of bathtubs themselves produce special mixtures that take good care of the surface. Be sure to check the composition to avoid the presence of corrosive ingredients.
Detergent for acrylic bathtubs "Avuar"
AVUAR produces high quality household chemicals for care, but it is important to consider that it is allowed to use phosphate-free formulations for acrylic bathtubs. They are sold in a concentrated form, so they deal well with various types of dirt. The detergent for acrylic baths is applied for 5 minutes. on dirt, and then rub it with a sponge. If stains remain, you can repeat the treatment.
Is it possible to clean the Domestos acrylic bathtub?
In the household chemicals market, this manufacturer enjoys prestige, so many people buy it for the care of plumbing fixtures. As part of "Domestos" there is hydrochloric acid, which copes well with various pollution. Describing whether it is possible to wash an acrylic bathtub with Domestos or not, it is worth mentioning other advantages of this product: safety, acceptable cost, efficiency and no risk of damaging the surface. Apply the gel to a sponge, walk over the dirt and leave for 5 minutes, then rinse off with plenty of water.
Can the acrylic bathtub be washed with Sanox?
The leading manufacturer of detergents in Russia "Aist" produces Sanox gel, which is made taking into account the latest cleaning formula. Finding out the best way to wash an acrylic bathtub, it is worth pointing out the main advantages of Sanox, which include its disinfecting properties and effectiveness in the fight against various contaminants. Thanks to the high concentration of active substances, you can significantly save on cleaning. To care for an acrylic bath, apply the gel on dirt for 10 minutes, and then go over the surface with a sponge.
Can an acrylic bathtub be washed with Pemolux?
You can buy this brand of cleaning products in household chemical stores. The most popular is powder, but it is not suitable for an acrylic bath due to its content solids... There is also a gel in the line of this brand that conducts gentle cleaning. When caring for an acrylic bathroom, apply the product according to the rules, applying it to problem areas and gently cleaning it with a sponge.
Is it possible to clean an acrylic bathtub with Sifom?
Ideal for the care of plumbing fixtures - Cif, which can be purchased in the form of a cream or spray. The first option is more popular. If you are interested in the best way to clean an acrylic bathtub, then know that Cif is versatile, and it is able to cope with various dirt. It contains microgranules of minerals and biological additives that remove different spots and rust. It is best to apply Sif on dirt, leave it for 5-10 minutes, and then rub it with a sponge and rinse it off.
What can not be used to clean an acrylic bathtub?
It is important to consider what products absolutely cannot be used to care for the acrylic surface.
- When choosing what to wash an acrylic bathroom with, you need to take into account that the composition of the product should not include abrasive particles, for example, granules, powders, and so on. This is due to the fact that they can damage the surface and ruin the product.
- Mixtures containing chlorine, acetone, formaldehyde, ammonia, acids and alkalis are not suitable for acrylic. Due to their influence, the material will lose its attractive appearance, and defects may also appear. With this in mind, study the composition before using any new product.
- Care of the acrylic bathtub should not be carried out using gasoline and acetone.
Often housewives are faced with the problem of how to wash an acrylic bathtub at home? The walls and bottom are sensitive to abrasive substances, so a product chosen at random will not work. The purpose of the article is to tell you about the basic rules and methods of cleaning, to give practical advice and recommendations:
- characteristics of cleaning agents, their features;
- cleaning options - what are the main differences;
- advice on how to maintain and extend the life of your bath.
What you need to know about the characteristics of acrylic bathtubs before cleaning them?
Before answering the question of how and what to wash an acrylic bathtub, let's talk about the material of manufacture. Acrylic has a dirt-repellent effect: microorganisms, bacteria and fungi do not develop in the bath. The material is durable, resists impacts. A tangible minus - it is easily scratched and subject to wear.
The main difference is susceptibility to abrasive and chemically active components. Like plastic, substances with increased alkalinity or acidity lead to degradation of the structure, and abrasives scratch the surface, leaving deep grooves.
It is important to be careful when washing. Do not buy abrasive compounds, pastes with ammonia, chlorine, acids and alkalis. Powdered foods are harmful, leaving damage and scratches. Brushes (metal and with stiff bristles) are contraindicated for use.
What brushes and sponges to use
Use soft cloths or sponges for cleaning. Cloth napkins are also used. They are moistened in special solutions (we will talk about them further). After washing, wipe it dry and polish it.
If you cannot buy a special sponge, use soft-bristled rags, for example, microfiber. If necessary, use a regular cloth - the main thing is that there are no abrasives on the surface.
How to clean an acrylic bathtub at home: TOP 5 ways
For you, we have selected several options for how to clean an acrylic bathtub at home:
- detergent;
- lemon acid solution;
- vinegar;
- soda;
- Toothpaste.
Detergents
Adequate and in a simple way the use of special detergents is considered. Their cost rarely exceeds reasonable limits. For correct selection make sure there are no abrasives. Often the composition is indicated on the packaging of goods, or special notes are made.
Acrylic Bath Cleaner used for small and large cleaning volumes... The spots that appear are removed using:
- Cif- for baths, sinks, tiles and toilet. The composition does not contain abrasives, which is safe for acrylic. Reasonable price and a variety of types of composition (spray, paste, cream) makes it a popular product among buyers. After cleaning, a film appears that protects it from further formation of limescale.
- Akrylan- foam for bathrooms and showers. When using, leave only until completely dry, without rinsing.
- Bass- cleaning agent, used daily. Sold in liquid form.
- Tim-Pro- an environmentally friendly product, helps to fight unpleasant odors, is effective for heavy pollution.
- Cinderella- a popular substance that emits a pungent odor, therefore, when spraying (sold as a spray), wear gloves and a special mask.
- Chister- composition for quick removal of dirt, promotes the decomposition of streaks and grease. Consists of a polymer that protects against fungi.
In addition to those listed, allowed use of the following funds at your own risk:
- Sarma;
- SunClean;
- Luxus professional;
- L. O. C. Plus;
- Cillit;
- Acryl - Net;
- Star - Acrylat;
- Triton;
- RAVA K;
- Panny.
Citric acid solution
Citric acid is an organic acid with a relatively high solution pH. The materials perfectly clean off plaque, grease and other contaminants. Organic acid is especially effective on ordinary substances, therefore it is easy to clean fat with its help. In its pure form, it adversely affects acrylic, therefore mix into solution:
- On ⅔ fill with warm water;
- Pour in half a liter of acid;
- Stir the consistency and leave overnight;
The method is effective, but aggressive towards acrylic, and it is not recommended to carry it out more than 0.5 years. After standing for about 12 hours, the solution goes down. Stir citric acid more thoroughly than vinegar - completely dissolve it for further precipitation. At the end, the structure is rinsed with a stream of water from the shower and wiped with a soft cloth. Rub extra to add shine.
Apple vinegar
A practical substance, but it does not always have a positive effect on acrylic. The main feature is low pH and high acidity. For the material, this factor turns out to be critical, especially in the presence of scratches. Work should be done quickly and accurately. The recommended way is to moisten a cloth abundantly in the solution, apply it to the dirt and sprinkle it with water.
We advise you to use the method at least once every six months. For heavily soiled:
- Prepare 1L of 9% vinegar;
- Fill with hot water two-thirds;
- Pour vinegar;
- Wait for the night;
- Rinse and Wipe
Soda
Plaque is removed with regular soda. The composition has a high alkaline environment that breaks down fats and strong compounds. In most products, it is present in the form of compounds or in the usual form. There are two types: food and calcined.
Use the method every 3-5 months. Baking soda is a weak alkali, soda ash is strong, with a powerful abrasive effect. Use baking soda exclusively.
- Place 2-3 tablespoons of baking soda in a bowl;
- Pour in a glass of water;
- Moisten the soft side of the sponge with the solution;
- Apply the mixture by blotting, not rubbing;
- After 15 minutes, rinse with water and clean with a cloth.
Never use undiluted soda! It has a strong abrasive effect and will damage the case.
If you need to leave the surface intact, use distilled or filtered water. In some cities, tap water contains a large amount of calcium, which reacts with baking soda to form fine sand-like crumbs. Using water will get rid of it. The advice is also relevant for other cleaning methods associated with the use of chemically active substances.
Toothpaste
Acrylic came to plumbing from dentistry - it was used for veneering denture frames and making crowns, so it is quite acceptable to clean the bathtub with toothpaste.
The procedure should not be carried out more than once every two months. Buy non-abrasive pasta. The manufacturer may not indicate this on the packaging. The abrasive particles are like small grains of sand that clean off plaque from the teeth, but they will severely damage the surface of the bathtub. Before using, squeeze a small amount of the paste onto your finger and rub it - the sand is immediately visible.
- Apply the paste to a sponge or tissue;
- Wipe the dirty surface;
- Clean with water;
- Rub until shine
Video: how to wash an acrylic bath
The video below presents detailed tips than washing an acrylic bathtub.
Let's consider the main ways to clean an acrylic bathtub:
Contraindications: what should not be used when cleaning
A few words about how you can't clean an acrylic bathtub at home. We do not recommend using:
- Acetone- corrodes plastic, contributes to the appearance of holes.
- Abrasive substances- spoil the surface, leaving scratches and reducing the thickness of the enamel.
- A mixture of several components- creates the opposite effect by scratching the walls.
The appearance of acetone in the room should be completely excluded. The element is chemically active and acts as a solvent. Enough 10-20 ml for a dent on the surface of the structure.
Wash off active chemical substances cold water... High temperatures increase the reaction rate and surface damage will occur more quickly.
Detergent compatibility with acrylic surface
Can an acrylic bathtub be washed with Domestos or a mixture of substances? It is undesirable to mix with:
- Formaldehyde- they have no compatibility with acrylic.
- Chlorine- its use creates pores, shortening the life of the product.
- Acetone, ammonia- corrode the walls.
Domestos, Sanox, Pemolux and Selite contain hydrochloric acid, which destroys the protection. Initially, it bleaches, but after that it absorbs plaque, getting dirty faster. Therefore, such detergents must not be used.
Whiteness disinfection
An acrylic bath is a way to forget about the fungus forever, but it is not perfect either. The fungus does not appear on the material, but easily multiplies on plaque, fats and other organic matter with nutrient microflora. Avoid the appearance of contamination for a long time, and if it does appear, periodically carry out a complete disinfection.
Fill the bathroom with room temperature water;
- Add 2 liters of whiteness (7%);
- Do not touch for 10-15 minutes;
- Rinse off the water and type again;
- Remove any residual whiteness and drain off the water;
- Wipe dry with a cloth.
Rules for correct operation
The bath does not require serious maintenance, but it is still necessary to follow the rules.
- Periodic restoration of plumbing in a decent condition in 5 minutes - after water procedures rinse with clean water... Acrylic does not absorb dirt, so rinsing is sufficient.
- Wipe the tub after use a sponge with soapy water... Then dry to avoid streaks.
- To remove scratches, there are restoration kits- they are sold at hardware stores.
The bath is the main item in the bathroom of every apartment; it is the place where hygiene procedures, relaxation, washing, and other household operations are performed. To withstand such intensive use results in accelerated wear and heavy soiling.
Therefore, all homeowners are interested in the question of how you can easily clean the bath from plaque, yellowness, especially if it is made of such a capricious material as acrylic. are expensive enough to be replaced every 5 years, so it is more rational to keep the dishwasher clean and tidy. In this article, we'll show you how to care for an acrylic bathtub to keep it white and shiny throughout its life.
Material characteristic
Acrylic is called modern polymer material, from which modern, technologically advanced bathtubs are made. They are lightweight, have low thermal conductivity, high wear resistance and a beautiful glossy sheen. A huge assortment of forms, an inexpensive price and a large size range of acrylic products have become the reason for the enormous popularity of these products. Acrylic baths have the following advantages:
Note! Cleaning an acrylic bath and removing limescale, yellowness or other contaminants is a responsible task, the appearance and service life of the product depends on the correct implementation.
Causes of damage
The price of a high-quality acrylic bathtub is 7-35 thousand rubles, so hardly anyone wants such an expensive purchase to become unusable without proper care after 1-2 years of use. Not knowing how to clean an acrylic bathtub, the homeowner runs the risk of getting a damaged washing container after a few months of operation, suffering from limescale, yellowness and dirt. To clean the acrylic bathtub easier, the following manufacturer's recommendations must be followed:
Important! It is important for homeowners to understand how to care for an acrylic bathtub to protect the product from limescale, stubborn dirt and yellowness. To clean the garment if the wash container turns yellow, you can use a special mild cleaning agent with a foamy consistency. The use of abrasive products will cause scratches. Small fresh dirt can be washed off with plain water and a soft sponge.
Washing methods
Acrylic bathtub owners often wonder what to do to keep it from turning yellow, and how to avoid limescale build-up. Acrylic is a dirt-repellent material that can be maintained with a little maintenance if you know how to clean an acrylic bath.
- To keep the acrylic bathroom clean, rinse it with running water after each use without using a cleaning agent. To dry the container, you can wipe it with a soft absorbent cloth to protect it from plaque and yellowness.
- Once a week, you need to wash the product using an acrylic bath cleaner to clean it from rust, stubborn dirt, plaque and yellowness. The product is foamed and then applied to the bath with a soft sponge. To make it work, it is left on the surface for 10-15 minutes and washed off with plenty of running warm water.
- If small cracks or scratches appear on the acrylic surface, they are removed by sanding with fine-grained sandpaper. In order to return the shine to the material after sanding, a special polish is applied.
Manufacturers claim that the most common reasons loss of acrylic products of attractive appearance and shine are poor quality running water and the use of abrasive, strong or aggressive cleaning agents.
Detergents
What to do to maintain the appearance, whiteness and gloss of an acrylic bathtub? The answer is simple - rinse the product with running water after each use, and also clean it regularly special means... If you do not know how to clean an acrylic bathtub, you can use the manufacturer's recommendations. They recommend using the following brands:
Please note! When deciding what means to wash an acrylic bathtub, give up the use of potent, aggressive brands, which include acids, ammonia, solvents, acetone, alkalis.
In addition, apply the detergent only with a soft sponge; it is highly discouraged to use brushes, as they leave scratches on the surface of the material, into which dirt is subsequently clogged. Before washing the acrylic bath, make sure that the product does not contain abrasive particles, which also injure this delicate material.
Video instruction
When the bath is clean, then not only is it pleasant to spend water treatments, but you can also be sure that nothing threatens your health. Therefore, taking care of the bathroom plays a very important role and it needs to be given enough attention. Sometimes the question arises of what to wash the acrylic bathtub so as not to spoil this material and at the same time get the desired result.
At the same time, it must be borne in mind that contamination will arise due to poor quality water which you are accustomed to using or when there are certain harmful components in the water. Gradually, under the influence of these unpleasant factors, any bath begins to become more yellow and dull, loses its attractive appearance and whiteness. This cannot be avoided even when it is cleaned daily with special detergents.
It is better to wash your acrylic bathtub regularly than to clean it afterwards.
How to disinfect an acrylic bath
Of course, acrylic is not one of those materials that lend itself to the very rapid appearance of mold or mildew, but it still needs to be additionally disinfected. It is especially important to do this when there are small children. This is necessary not only to make it pleasant to carry out water procedures, but also in order to provide children with maximum protection and safety.
So, the procedure for disinfecting an acrylic bathroom at home is very simple and everyone can perform it, because it does not take too much time.
- Pour water into the bathtub that is at room temperature.
- Add a small amount of a special disinfectant to it;
- stir the product and leave for about ten minutes;
- drain the water and then rinse the bath thoroughly several times to remove any residual disinfectant.
How to properly care for acrylic surfaces video
If you do not know how to wash an acrylic bathtub at home, then ask the experts for advice and they will help you choose the best and highest quality product that will help remove all the dirt and will not harm the surface.
The new acrylic bathtub looks flawless - unusual design, glossy surface and perfect smoothness of the coating. In order for the bowl to retain its gloss as long as possible, you should adhere to the basic norms of use and follow the recommendations for care.
The primary task is to choose the right product for cleaning acrylic bathtubs, taking into account the technical and design features polymer "font".
The popularity of acrylic bathtubs is due to their excellent appearance, variety of shapes and colors, smooth surface, low thermal conductivity and affordable cost. However, polymer plumbing, in contrast to metal products has a couple of significant disadvantages: susceptibility to mechanical stress and painstaking maintenance.
Maintenance of the acrylic bath must be carried out without any abrasive products. The use of metal brushes, washcloths and brushes with a hard bristle is excluded. Failure to comply with the banal rules of care ensured the appearance of a grid of micro-scratches, as well as the "combing" of the upper glossy layer.
Acrylic is a tough thermoplastic polymer, but it cannot withstand heavy impacts and is easily scratched. Even minor mechanical damage and roughness acquire a yellow-gray tint over time.
TO detergents a number of restrictions are also put forward. Household chemicals should not contain:
- Fine-grained components. Powders, including dry soda, contribute to the appearance of micro-scratches - the shiny surface fades and becomes dull.
- Chlorine. The substance corrodes the polymer - the structure becomes porous, the surface becomes rough.
- Solvents. Regular use of acetone, oxalic acid, white alcohol leads to partial dissolution and deformation of the top layer. As a result, the bowl loses its former attractiveness.
Ammonia and formaldehydes have a similar effect with acetone. With prolonged contact with chemicals, acrylic begins to deform.
The category of prohibited agents includes concentrated alcohols, acids, gasoline, alkalis. All substances change the color of acrylic, provoking the appearance of microcracks
An arsenal of cleaning products and technologies
The basic requirement for the care of the "font" is quite standard - to remove the dirt that has appeared in time. To maintain the bowl in good condition, improvised or universal are suitable purchased funds... To get rid of the surface of old stains and "revive" the bath will have to try and carry out several cleaning cycles.
Folk methods - light artillery
Relatively recent contamination can be removed with improvised means. To verified folk recipes sparing actions include:
- lemon acid;
- Toothpaste;
- baking soda;
- vinegar and salt;
- hydrogen peroxide.
Lemon. The acid helps fight rusty streaks and keeps the bathroom snowy.
For a bowl of standard volume (200 l), you need a bag of dry lemons for 50 g. Acid granules must be dissolved in half a liter of water at a temperature of 50-60 ° С
Following actions:
- Fill the bath with water at 40-50 ° C up to the overflow hole.
- Add lemon solution and stir.
- Leave to "sour" for 2 hours - salt deposits will soften during this time.
- Drain the solution and rinse with water.
- Dry the surface with a soft cloth.
Old deposits are removed with a "steeper" emulsion. The cleaning composition is prepared at the rate of 50 g of lemon per 2 liters of water. The affected areas must be treated with a solution, left for 20 minutes. Evaluate the result and repeat the procedure if necessary.
"Lemon" cleaning should not be overused. In order not to damage the enamel, the procedure is recommended to be performed no more than twice a year.
Toothpaste. The method is costly, but it is quite useful for express cleaning from yellow bloom... Suitable for the procedure white paste or powder. The dry composition must be diluted with water to a thick sour cream.
Spread the toothpaste over the dirty areas with a soft brush - the layer thickness is about 1.5 mm. Wash the surface after 15 minutes
If the desired effect is not achieved the first time, you should repeat the procedure, increasing the waiting time to 40-60 minutes.
Baking soda. Sodium bicarbonate - soda will help maintain the whiteness of the bath. Dry cleaning powder is not used as it may damage the coating. Pre-dilute soda with a small amount of water.
The "affected" areas of acrylic are treated with the prepared gruel. It is impossible to rub soda into the surface, it is enough to leave the solution for half an hour, and then rinse with water.
Using baking soda, you can make a cleaning cream for the gentle care of acrylic bathroom fixtures.
Composition homemade remedy: water - 0.5 l, soda - 100 g, laundry / baby soap - 15-20 g, aromatic oil
Cooking technology:
- Grate a bar of soap, pour hot water (60 ° C), "insist" the solution for a couple of hours.
- Add baking soda and a few drops of aromatic oil to the soap mixture.
Store the finished product in a plastic or glass containers... Method of using homemade "cream": soak a soft sponge with the composition, wipe acrylic coating... After half an hour, rinse and wipe dry. The result of treatment is a clean bath and filling the room with a pleasant aroma.
Vinegar and salt. In the struggle for purity, acetic acid has shown itself well - it removes yellowness from the bottom and walls of the bowl. There are two possible applications:
- Local cleaning. Apple vinegar(20 g) diluted with water (200 g). Moisten the problem area with vinegar solution, rinse with a stream of water after 10 minutes. The procedure should be carried out with rubber gloves.
- Complete update. Fill a bowl with warm water, pour 1.5 liters of weakly concentrated acetic acid into the bath and leave overnight. Drain the solution, wipe the walls and bottom with a soft sponge. Treat the uncovered sides of the bath using the "local cleaning" method.
Slight rust contamination can be salted. Salt crystals are a hard abrasive, so you need to act very carefully. For work, it is better to use finely ground salt.
Prepare a thick saline solution by mixing salt grains with water. Apply "gruel" to the stain, let stand for 5 minutes. To enhance the effect, wipe the contaminated area with a cloth soaked in turpentine. All work should be done with gloves.
Hydrogen peroxide. A more radical method is the use of hydrogen peroxide and ammonia. In a glass container, it is necessary to combine 100 ml of ammonium hydroxide and 50 ml of peroxide. Apply the solution to dirt with a cotton pad or sponge, let stand for 10 minutes.
Wipe off the cleaning compound with a soft cloth, then rinse the bath. It is not worth "overexposing" the solution longer than the prescribed time - prolonged and frequent contact of acrylic with ammonia can harm the polymer coating
Household chemicals in the fight for cleanliness
This group of drugs is made up of universal products for cleaning and maintaining the attractiveness of acrylic bathtubs, designed for regular use. The names of popular items for the care of polymer plumbing fixtures:
- Ravak Cleaner (Czech Republic);
- San Wedge (Ukraine);
- Bagi Akrilan (Israel);
- Frosch "Green Grapes" (Germany);
- Bas "Tim-Profi" (Russia).
The sanitary ware company has introduced its own line of products for acrylic surfaces.
The all-purpose Cleaner does not contain chlorine, it gently removes lime particles and fat deposits from the coating. Sold in a 500 ml bottle with a convenient spray dispenser
Cleaner cleans and polishes acrylic surfaces. To remove stubborn dirt, the liquid must be sprayed over the bowl of the bath and left to act for 10 minutes. After - rinse with water.
SunClean. Despite the relatively high cost, the tool has a broad spectrum of action. The liquid emulsion removes traces of calcium soap and rust without damaging the capricious bath coating. The composition is free of phosphates, acids and abrasives.
SanClean is suitable for cleaning jacuzzis, showers, glass and mirror surfaces.
The drug has conquered many positive feedback users. The cleaning foam is effective against fungus, limescale, soap residues, mold and rust.
Composition of Acrylane - surfactants in tandem with citric acid. This symbiosis of components explains the cleaning and disinfecting qualities of the drug. After processing, a protective film layer remains on the bowl, which reduces the accumulation of dirt.
Possible volumes of Acrilan bottles: 400, 500 and 750 ml. Precautions for use: when applying, use gloves, do not mix with other "chemicals"
The main advantages of Akrilan:
- high efficiency;
- ease of use;
- quick action - it is necessary to distribute over the bath and rinse;
- versatility - applicable for various coatings.
The disadvantages of the product include high cost and toxicity. Cleaning should be performed with the hood turned on, as Acrylane has a pronounced smell of chemicals.
The product is made from biodegradable components. Basis of composition: detergents and grape acid. Frosch - the best option for allergy sufferers and adherents of environmentally friendly products.
The product gently removes traces of water droplets, mud and lime deposits, and fills the bath with a fruity aroma. Minus "Green Grapes" - does not disinfect and does not cope with "caked" salt deposits
Environmentally friendly cleaning mousse Russian production... Suitable for comprehensive care for plumbing: processing of acrylic, plastic, stainless and chrome surfaces. The solution penetrates into the structure of impurities, destroying particles of salt deposits and removing unpleasant odors.
Tip-Profi does not contain abrasive components. After use, a protective, dirt-repellent film forms on the acrylic surface. The product returns a mirror-like shine to the coating
Removal of scale and rust
With the "neglected" state of the bath, universal preparations may be powerless. Specialized products will help to restore the former whiteness and shine:
- Triton Acril cleaner (Russia);
- Sanox "Clean Bath" (Russia);
- cleaning paste "Astonish" (Great Britain).
The tool can be classified as a universal drug with a pronounced cleansing effect. Acril cleaner copes well with greasy, limescale deposits, rusty stains and water stone.
Main active ingredients: cationic and neon surfactants, antiseptic, organic acids and fragrance.
Method of application: spread on the surface and leave for a quarter of an hour. Wipe with a soft sponge, rinse and thoroughly rinse the "font" under running water
Inexpensive product from the category of "Green Technologies" with a whitening effect. In the composition - surfactants, complexing agents, flavorings and glycerin. The absence of acids makes the product safe for acrylic coatings.
When filled with a “gentle” filling, Sanox is effective against most bathroom stains, including potassium permanganate and rust. The product can be used for cleaning any plumbing fixtures and tiles - it makes surfaces shiny.
The main advantages: affordable cost, efficiency, safety. Cons: rather pungent odor and uneconomical waste due to liquid consistency. To receive good result the product must be kept for about 30-45 minutes.
Astonish paste. Despite the fact that the main purpose of the product is to care for kitchen surfaces, the paste is often used to clean acrylic bathtubs.
Astonish works with care and efficiency. The composition contains soap, mild abrasives, orange extract. The product is manufactured using innovative technologies and meets strict European quality standards.
The cleaning paste is safe and multifunctional, thanks to its consistency it is economical to use. Disadvantage of Astonish - hard to find in a retail network
Whitening products
Cif Ultra White (Hungary) is considered the leader among "soft" preparations with a whiteness effect, in the second place, according to consumers, is Mister Chister (Russia).
The cream contains the smallest microgranules - whitening components that enhance the effect of cleaning agents and provide snow-white acrylic.
Cif Ultra White has a cumulative whitening effect - the more you use the product, the whiter your plumbing. The cream does not leave streaks and micro-scratches
Contraindications to use: wallpaper, wooden surfaces, textiles, metal with electroplated, vinyl, linoleum and aluminum.
Mr. Chister. The tool effectively removes the yellowness of the bathroom bowl. In addition, Mr. Chister copes well with rusty areas, grease on polymer surfaces and has an anti-fungal effect. Additional advantages: low cost and saturation of the bath with shine.
Bathroom disinfection products
Any bath must be disinfected once a year, whirlpool systems are sanitized monthly. The procedure is aimed at destroying fungal spores, mold and pathogens. Specialized products will cope with this task: Ravak Desinfectant and Triton Desinfectant.
Both concentrates are chemically potent agents that cannot harm acrylics. Suitable for disinfection of sanitary ware, including hydromassage systems
Highly concentrated emulsions, depending on the purpose of use, require dilution with water - the ratio of cleaning agent to water is indicated in the manufacturer's instructions.
Nuances of cleaning a bowl with a hydromassage
Whirlpool systems are equipped with jets connected to circulation pump... The technique creates an overpressure of the water flow, which, under pressure, exits through the nozzles in the bathroom.
With regular use of the hydromassage options, the nozzles do not have time to dry out - constant humidity provokes the multiplication of microorganisms, the growth of mold and the accumulation of lime deposits.
The order of the disinfection procedure:
- Fill the reservoir with water so that the nozzles "go" under the water by 5-7 cm.
- Pour the cleaning concentrate into the bath and turn on the hydromassage for 20 minutes - the liquid should make several circular cycles through the system.
- Drain and refill the bowl.
- Switch on the nebulizers for 5 minutes and empty the bath.
Upon completion of the procedure, it is necessary to perform standard cleaning of the walls and bottom of the "font".
Prevention of the appearance of contamination
Compliance with the basic rules for using an acrylic bathroom will save you from extra costs, will facilitate the care of the plumbing, extending its service.
# 1. Do not soak laundry. The ingredients of washing powders are not always comparable to polymer coatings. Moreover, if bright clothes sheds, then the bath has every chance to "absorb" the paint. This property of acrylic must be taken into account when shampooing after "fresh" painting.
# 2. Animal bathing taboo.
Pets will damage the polymer coating with their claws. Alternatively, you can put "anti-scratches" on the paws and put the animal on a litter
No. 3. Respectful attitude. Do not put heavy objects, metal basins, etc. in a plastic tank. They can deform acrylic and leave dents and scratches.
No. 4. Regular care. Better prevention the formation of tubular stains - cleaning the bath after each bath. It is enough to rinse the bowl with warm water, remove the drops with a cloth.
Conclusions and useful video on the topic
The video compares the effectiveness folk methods cleaning (toothpaste and soda-soap solution) with household chemicals:
There are many active funds... Improvised preparations do not always cope with the task, therefore it is better to use specialized household chemicals, created taking into account the peculiarities of acrylic plumbing.