Removing stains from doors. We remove greasy stains on doors of different surfaces. Cleaning the veneer surface of MDF doors

Carrying out general cleaning activities affects all aspects of life. We remove dust from all surfaces, wipe floors and windows, and Appliances. Among standard procedures, no less important, but less frequently performed processes are easily lost.

Today we will talk about doors, or rather, what means to wash them and how to do it. We will give answers to the most popular questions in the field quality care behind the door leaf, glass and fittings.

Doors are an integral part of our home

Basic moments

Interior doors, no less than other objects in the apartment, accumulate dirt and dust. This is especially noticeable if the door leaf is not monolithic, but has various carved parts and glass. Traces of dirty hands immediately appear on light-colored doors, and the fittings become covered with a sticky layer of dirt mixed with dust.

Eco-veneer is especially vulnerable to contamination, because by and large, this is just a textured film with which the canvas is pasted over. Eco-veneer film is produced in different countries, quite high-quality material is obtained from Koreans, Japanese, Italians.

In order for the door to please us with its cleanliness and be pleasant to touch, we will have to take care of it during operation. In addition, blank canvases are not so popular now, because the door is most often an integral attribute of the overall picture of the interior of the room, therefore it must be colorful and beautiful, and therefore clean.

Doors support the interior of the room

Let's highlight the main points in caring for doors:

You need to take the time to do more than just wash yourself. door leaf, but also cleaning and adjusting fittings. If it is loose, you need to tighten it, if it creaks, you need to lubricate it.
If you have doors made of natural wood or solid wood in your home, it is worth adjusting the microclimate in the room. It is undesirable to allow the temperature to rise above 25°C and the humidity to exceed 70%.
Severe damage to quality doors it will not be possible to hide, there is no way to hide any scratches or dents, so try to treat the material with care.
If soiled or stained, try to wash your interior doors immediately, it is better not to wait for dirt to be absorbed into the structure of the material.
The old doors are not the best best quality, or modern eco-veneer, can be additionally protected from dirt by coating with varnish. Not the smartest solution, but accessible to everyone.
During repairs, cover the doors with plastic, like other pieces of furniture, to avoid getting dirty.

Doors are made from different materials: PVC, laminated, eco-veneer, natural veneer, solid wood. For each material in ideal your own detergent composition, or just clean water. To properly wash and clean fabrics, you can use the following tips:

When cleaning, pay attention to door hardware

Many modern doors equipped with glass, to wash them without smudges or streaks, add a couple of drops to the water ammonia, provided that they are not matte.
Metal parts on the doors can be easily washed with ordinary soapy water.
To avoid damaging the door covering, it is best to wash and wipe the surface with a soft cloth, such as suede or microfiber.
Dust will certainly accumulate on decorative inserts and carved elements of doors, so do not forget to remove it during weekly cleaning of the house.
When finishing washing the door leaf, pay attention to the fittings, wash and disinfect the handles.

Most often, the door fails or loses its aesthetically attractive appearance through our fault, due to poor handling and lack of proper care. But we want the door to serve us faithfully long time, so we choose suitable remedy and we will wash it.

Detergents

Door cleaning products are selected taking into account the material from which it is made, the degree of contamination and the presence decorative elements on the surface of the canvas.

Universal ones are very popular detergents, sold in spray form. They are very convenient to use, they do not have pronounced chemical odors and help clean stains and other contaminants from surfaces of different quality: glass, wood, pvc, eco-veneer. You can purchase cleaning products for a specific type of door covering in the same stores where you bought your doors.

White and bright doors required more care

Wooden doors require more attention than veneer or eco-veneer panels (3D films). They don't like huge amounts of moisture, so when wet cleaning, make sure the cloth is slightly damp. Wooden doors can be rinsed with plain water, without using detergents, but in most cases dry cleaning will be sufficient. To protect the canvas from contamination, use polish.

Among the folk detergents with which our compatriots try to wash doors, the following compositions can be distinguished:

Dishwashing liquid does an excellent job of removing dirt from the veneer surface. Eco-veneer can also be wiped with a similar surfactant composition.
Grease stains can be removed using potatoes; to do this, cut a fresh potato in half and rub it on the stain. After removal, rinse the cleaned area with plain water and wipe dry with a cloth.
For doors made of solid wood and natural veneer, which are not particularly fond of wet cleaning, housewives found good way removal of fatty and dirty spots. Talc is poured onto the dirt, it absorbs the dirt, and then wiped off with a dry cloth.
To give a veneer door a shine, you can add it to the clean water used for washing. apple cider vinegar. Approximate proportion: 1 tablespoon per liter of water. Some types of eco-veneer can also be treated with this composition.

Do not forget to remove the detergent from the door after washing using clean water, and then wipe the canvas dry. Do not use abrasive cleaning tools and compounds: brushes with iron bristles, scourers, washing powders; with such a product you will definitely damage the decorative surface.

Working with glass

If frosted or ordinary glass, you should start washing the door with it, and only then move directly to the canvas. Smooth glass can be washed with ordinary soft rags with a minimum amount of lint; frosted glass can be rubbed with a brush with soft bristles.

Frosted glass is produced using the sandblasting method. Knocks off a smooth surface with sand upper layer, causing the glass to take on a cloudy appearance with a frosty effect. Frosted glass allows you to hide what is happening behind the door starting from a distance of 30-40 centimeters.

Frosted glass can be easily washed off grease stains and fingerprints using dishwashing liquid or starch solution. To prepare the solution, add starch to warm water, 3-4 teaspoons per 1 liter.

If desired, you can install it completely in the house glass doors

Complex, stubborn stains are removed using alcohol, acetone, and nail polish remover based on it. Frosted glass does not lose its decorative qualities. However, when working, make sure that drops of solvents do not land on the rubber elements of the box seal or the silicone filler next to the glass.

There is no need to treat frosted glass with solvents, gasoline, or ammonia. You also don’t need to scrape them with sharp objects, for example, to pick off traces of silicone.

If there are some defects on the door, they can be masked using polish. If cracks and scratches wear more a strong character, then they will help hide them. Choose a suitable shade for your door, and rub the pencil into the surface of the canvas, letting the wax fill its flaws.

While maintaining proper cleanliness in your apartment, you will have to take care of your doors one way or another. Make sure that they always look clean and tidy, because there is nothing complicated about it.

Today, the most popular material for door production is MDF, or finely dispersed fraction. In simpler terms - a slab of small-sized wood chips. If such material is stained with grease, then its methods effective removal will vary depending on the type of outer covering. Find out how to remove greasy spots With MDF doors, which folk remedies will be suitable for a specific door covering, what brands of household chemicals for this purpose are currently on the market. First, you should arm yourself with knowledge about the types of external MDF coating.

Materials used for cladding MDF doors

There are only five types - natural veneer, eco-veneer, polyvinyl chloride film, laminate and enamel paint. The first two types are a thin layer of wood that preserves its texture. They are the most expensive types of door coverings, and, in fact, represent natural wood, requiring appropriate care.

Polyvinyl chloride (PVC) film is one of the cheapest types of cladding. Its feature is increased moisture resistance, which should be taken into account when cleaning. It happens different colors, including with drawings.

Laminated doors are similar to PVC cladding. The difference is the production technology - the laminate consists of two layers. The bottom one is paper with a printed pattern, and the next top one is a film that protects the base. This type of coating can be cleaned with household solvents without fear of damaging its structure.

Enameled doors found widespread in the furniture market. High-strength paint is distinguished by a variety of colors and application technology in several layers. As a rule, in addition to this, the cladding is coated with a protective varnish. This structure allows you to clean painted doors using almost any means. Let's look at how to remove stains from doors different types cladding.

How to remove grease stains from veneer doors

Since veneer is a natural layer of wood, no abrasive or aggressive materials chemical substances cannot be used. For household chemicals, you can use the brands “Shumanit”, “Domestos” or “Silit”. Apply them to a soft cloth and gently wipe the grease-contaminated surface.

There is an effective folk remedy for removing grease stains from doors. It consists of using regular potatoes and talcum powder. If the latter is not available, you can use baby powder. The potatoes are cut into two halves. The area of the incision should be thoroughly wiped with fat. Wait ten to fifteen minutes until the potato juice dries. And then remove the dirt along with the starch with a dry cloth. The resulting white stains can be easily removed with talcum powder or baby powder.

As a piece of advice: it makes sense to coat newly purchased veneered MDF doors with polish, which will prevent the formation of grease and dirt.

How to remove grease from MDF doors with an external PVC coating

PVC film can be easily cleaned using folk remedies. Let's look at three recipes. An effective solution is a mixture of liquid soap and plumbing cleaner, mixed in equal parts. Then the resulting liquid is applied with a soft sponge to the contaminated areas and left for ten to twelve minutes. After this, it is wiped with a dry soft cloth.

As another folk recipe How to remove grease stains from a door is a mixture of soda and sunflower oil. You need to take three teaspoons of both substances and mix well until a paste forms. This will be used to clean the door covering. How effective is this method? Sunflower oil forms a protective film on the door, and soda, being a light abrasive, will clean out greasy drops.

A third person will tell you how to clean doors from greasy stains using baking powder. folk way. You need to take four to five teaspoons of baking powder and pour warm water over them. The resulting solution is applied to the contaminated areas with a damp and soft cloth, and then left for approximately ten to fifteen minutes.

Find out how to remove grease stains from laminate doors using laundry soap and alcohol in the next section.

How to remove grease and dirt from laminated doors

The alcohol solution is made from a ratio of one part alcohol to nine parts water. A napkin is urinated in it and fixed on the dirty area for five minutes. Then this place is wiped with a dry soft cloth.

How can you remove greasy stains from doors if not with laundry soap? Fifty to sixty grams of it should be grated into shavings, which are filled with warm water. The soap fat content should be seventy-two percent. The resulting slurry is applied to contaminated areas. This method is simple and effective. However, all manipulations must be carried out quickly in order to avoid moisture absorption into the laminated surface.

Door laminate is easy to clean and household products. For example, you can use the Pronto product. This furniture polish effectively removes all types of dirt and stains. A melamine sponge is also excellent for cleaning. You need to wet it, wring it out, and simply wipe the contaminated areas.

How to remove grease stains from doors so that they are not visible? Modern stores offer sets of special pencils and pastes for this purpose. They are able to hide any type of dirt on a laminated surface.

Advice: Do not use any abrasives to care for laminate flooring, as they can damage the door lining.

How to remove grease from enamel painted doors

As a rule, all MDF interior doors painted with enamel are covered with a protective layer of varnish. Therefore, the use of abrasives for cleaning is questionable. It is better to use safer traditional methods.

How to clean a door from grease stains using an ordinary lemon? Very simple. It should be cut in half, rub one half on the contaminated areas, and wait ten to fifteen minutes. And then rinse with warm water.

Another solution for removing grease stains from doors is a mixture of dishwashing liquid and citric acid in an amount of fifteen grams. It is additionally diluted with warm water in the volume of a teaspoon, stirred and applied to dirty places.

To cleanse, you can use baking soda, which dissolves in mouthwash. The mixing proportions are the same. This mixture removes greasy stains on doors well, but you should know how to remove them effectively and with what materials. It is better to use napkins for this purpose, both for wiping and subsequently cleaning the door from the solution.

Not everyone installs MDF doors in their home. Some people also buy natural wood. How to clean a wooden door from grease stains - the next section of the article is devoted to this issue.

How to remove grease from natural wood doors

For maintenance, only use cleaning products that do not have abrasive properties. It is strictly forbidden to use soap solutions and washing powders, as they contain alkali. Do not rub wooden surfaces with abrasive sponges. Depending on the type of wood, maintenance methods will differ.

How to clean wooden doors from mahogany and other valuable species from greasy stains - the use of burdock oil, vinegar or wax will help in this matter. They should be diluted in warm turpentine and wipe the wooden surface with this solution using a soft cloth.

How to remove grease stains on a wooden oak door? Oak furniture can be easily cleaned with a mixture of twenty grams of wax, one glass of beer and one teaspoon of sugar. It is brought to a boil, cooled, and then applied to the contaminated areas with a cotton swab. After drying, wipe with a soft cloth.

How to remove greasy stains from walnut wooden doors? Grease and dirt are easily removed with a mixture that includes olive oil and dry red wine in equal proportions.

But no matter what material the door is made of, it is important to remember some cleaning principles.

The nuances of cleaning greasy dirt from doors

When caring for door coverings, it will be useful to follow the following few rules and tricks:

Before you wash off greasy stains on the door, examine its coating and read the manufacturers’ recommendations for cleaning it;
When using a new cleaning product, always apply it to an inconspicuous area first;
If you suddenly purchased a low-quality MDF door, and it cannot be cleaned of greasy stains, do not rush to get rid of it - use self-adhesive film to hide traces of dirt;
It is better not to use cleaning products with harsh abrasive properties and metal sponges, which can severely damage any door surface;
To clean applied solutions, it is better to use soft, slightly damp cloths or napkins;
Before you wash wooden doors from greasy stains, always take into account the characteristics of the coating, and in some cases it is better to refuse to use solvents.

In conclusion, we can say that cleaning doors from dirt and grease is actually very simple and does not require significant time expenditure. The main thing is to do it regularly and according to the suggested methods. Now you know how to remove grease stains from MDF doors. And if the wood is natural, then use various oils care can not only clean it, but also improve its appearance.

Laminated interior doors removing oil stains how to remove greasy stains from doors

In order to increase its service life, any product must be properly cared for. And interior doors require special care. Care products for interior doors depend on the material from which they are made. Laminated doors are based on plywood board or chipboard, with a pattern on top, usually on paper based, and laminated special film. The main rule in care is the preservation of the top, laminated layer. But even on such doors stains of various origins can form, which spoil the appearance and which are best removed.

To remove stains from a laminated door you will need (and it is best to always have on hand):

Several soft napkins or a small sponge
Solutions of household solvents (ammonia, acetone)
Alcohol
Vinegar or lemon essence
Laundry soap

Stains on a laminated surface can be removed in the following ways:

First of all, it is necessary to determine the origin of the stain.
Before you begin removal, remove dust from the surface of the door leaf (you can use a damp cloth).
Using a cloth moistened with detergent, mild remedy You can remove stains from juice, wine, chocolate. The napkin is applied on top of the stain for three to five minutes, and then wiped with a soft, dry cloth.
Household solvents can be used to remove stains from nail polish, cigarettes, lipstick, markers, felt-tip pens or pencils. A sponge moistened with any solvent (acetone, white spirit, etc.) is kept on the stain for a short time, and then wiped with a soft, dry cloth.
If coffee stains appear on the surface of a laminated door, they can be removed with alcohol or ammonia solution. If the coffee stain was not removed immediately, and it has already dried out, then you can prepare a special solution (three teaspoons of baking soda per two hundred grams of water). Gently wipe the stain with a sponge or cloth soaked in the solution, dry with a hairdryer, and wipe with a soft, dry cloth.
Stains left by wax or chewing gum are most easily removed. The area of contamination is thoroughly dried and cleaned with a small scraper. The operation to remove such stains must be carried out with extreme caution so as not to damage the surface.
If acid stains appear on the surface of a laminated door, they can be removed with a cloth soaked in a solution of vinegar or lemon essence.
How and with what to remove greasy stains from different types of doors

Similarly, a napkin is applied to the stain, and after three to five minutes it is thoroughly wiped with a soft, dry napkin.
Complex stains caused by paint or shoe polish can be removed with special products designed for this purpose. Such products can be purchased at any hardware store.

A product for removing stains from laminated interior doors

When removing stains of any origin from a laminated door, you should remember that a damp cloth cannot be kept on the surface of the door for more than five minutes, and then you must immediately wipe it with a soft cloth and after one to two minutes wipe it with a damp sponge (moistened in plain water). This will avoid possible deformation of the top laminated surface. But if you still can’t remove the stain, you shouldn’t immediately think about replacing the entire door. Currently, there are special pencils for masking stains on laminated surfaces. You can purchase such a pencil at a hardware store and choose the color and tone to match the color of the door. You can also cover the stain with a special color-matched film. It is not recommended to clean stains on a laminated door with abrasive cleaners, as this may damage the surface.

How much does it cost to call a measurer and change the glass in an interior door reviews

Instructions on how to care for laminated doors, tips on how to remove stains from laminated doors, how to clean greasy stains on a door

How to clean interior doors from grease stains

Returning doors to their original cleanliness and neatness is not as difficult as it seems at first glance. If greasy stains appear, it is not necessary to change the canvas. We will figure out how to remove dirt from interior doors.

PVC doors

If a material such as PVC is dirty, then the following will help remove greasy stains:

liquid soap;
toilet, bathtub and sink cleaner;
sponges and rags.

Mix liquid soap and plumbing detergent in equal proportions.
Apply the solution to the stained area. At the same time, thoroughly rubbing it with a sponge.
Leave to stand for 5-7 minutes.
Rinse off with plenty of water.
Wipe dry.

In this way, you can remove all traces of stains without spending a lot of time.

Doors made of laminated chipboard

This material is considered the most accessible. This is where many people have a lot of problems as soon as the first greasy spots become noticeable.

How and with what to clean dried stains from doors after repairs

In this case, it is difficult to wash off the dirt. It is worth remembering that the material cannot be rubbed too much, since the top layer is paper.

First, try this method on an inconspicuous area. Look at the reaction of the material to alcohol. If everything is fine, then feel free to proceed with cleansing.

Higher quality laminated sheets can be washed with a household solvent, such as ammonia or acetone. To do this, you can carry out the following manipulations:

Wet the sponge with the solution.
Apply to the stain.
Hold for 3-5 minutes.
Wipe this area with a dry soft cloth.

Remember that when removing stains, do not keep the wet wipe on the door for a long time. The waiting time should not exceed 5 minutes.

If dirt appears, acetic or citric acid will help remove it. Coffee and various traces Drinks can be cleaned using the following working solution:

3 tbsp. l. baking soda.
200 ml water.

Prepare the solution and gently wipe the stains with it. Dry thoroughly with a hairdryer.

If traces of wax or chewing gum appear on the doors, it will not be difficult to wash them. To do this you need to do the following:

Dry the contaminated area.
Use a special scraper to remove wax or chewing gum.

Such manipulations should be carried out carefully so as not to damage decorative coating doors.

Remove paint stains traditional methods not worth it. For this it is better to purchase professional products.

MDF doors

If you find old greasy stains on an MDF door leaf, then don’t rush to spend your money on expensive substances. Every home has raw potatoes. And then everything is simple:

Cut the vegetable into two halves.
Use the cut side to wipe the stained areas.
Wait for the potato juice to dry completely.
Wipe the area with a dry cloth.

If there are small stains on the MDF doors, then prepare talc or powder. Apply the product to the fabric and gently work the fabric.

Fresh greasy stains from MDF doors can be washed using a solution prepared as follows:

A little dishwashing detergent is poured into the bucket;
add a little warm water;
The product is thoroughly foamed with a sponge.

The solution wipes off all greasy stains. We recommend cleaning the door afterwards. clean water and wipe it dry.

If the door leaf had a glossy surface, then after washing, treat it with polish.

Unpainted wooden doors

If you find dirt, you can wash it using a special paste, which is prepared according to the following recipe:

The solution is diluted to the consistency of a thick paste and applied to the stained area. Be sure to let the mixture dry completely. Next, you should remove it and rinse thoroughly with water.

Wooden doors, varnished

If you notice greasy stains, a new varnish treatment will help give the product its original appearance. To do this, you will have to remove the door and remove the old covering. You can do this in three ways:

wash;
heat treatment;
mechanical method.

At home, it is better to use the first method. To do this you need to take several steps:

The remover, which you need to buy in the store, must be applied to the entire surface of the door. Each stroke should be applied in the same direction.
Wrap the canvas plastic film. Let stand for about 4 hours.
Remove the varnish with a spatula or sandpaper.
Rinse off any remaining product with vinegar diluted with water.

After this, you can apply a new layer of varnish.

The methods discussed will help remove greasy stains on doors and give them their former beauty.

How to easily and easily clean MDF doors from grease stains?

How to remove grease stains from different surfaces?

Each of us has had to deal with the need to remove greasy stains from fabrics and surfaces.

Cooking is not complete without grease stains on clothes and kitchen surfaces. Children leave greasy marks from their hands wherever they can reach. The arrival of guests also does not go unnoticed; stains on the tablecloth, napkins and furniture will remind you of a cheerful feast.

Therefore, the problem of removing stains is always relevant. Grease stains are not easy to remove, but fortunately, there are plenty of known ways effective fight with them.

Grease stains are removed from various surfaces various methods. But the main motto for removing fatty stains is the faster, the better.

How to easily remove a greasy stain from doors made of chipboard, MDF and veneer 🚪

Remove excess fat, for example, with a knife. Do not try to wipe the stain, as this will make it even worse - the grease will spread over the surface faster. Immediately blot fresh stains with a napkin or towel. This will not make the stain disappear, but it will stop it from spreading further.

1. Grease stains on fabrics

2. Grease stains on tablecloths and napkins made of cotton or linen

Even old stains will disappear if you boil the product in water with the addition of two tablespoons of washing powder, two tablespoons of bleach powder and two tablespoons of vegetable oil. For boiling, take stainless or enamel dishes in which you do not cook food.
If you have potato flour and gasoline in your house, try removing stains in this way: make a paste of flour, dry it over a fire, cool it and mix it with gasoline. Apply to the stained area. After some time, clean the product from the mixture and wash the tablecloth.

3. Grease stains on upholstered furniture

If a greasy stain appears on upholstered furniture, you can quickly remove it using salt and alcohol. Apply salt to the greasy stain, rubbing it into the stained area for several minutes. Salt will absorb fat. Then wipe the stained area with a cloth soaked in alcohol.
Potato starch applied to a greasy stain is also a good sorbent. Starch is rubbed into the stained area, left for fifteen minutes, then removed with a brush or napkin. If all the fat is not absorbed the first time, repeat the procedure.
Place a white paper towel over the grease stain and iron with a warm iron. When heated, the fat will transfer from the upholstery to the napkin. Repeat several times.
A greasy, fresh stain on leather upholstery can be removed using whipped egg whites. The protein is thoroughly washed off with water.
The old stain is treated with an aqueous solution of vinegar in the proportion: one part vinegar to four parts water.
Also, a greasy stain on leather upholstery can be treated with a mixture of gasoline and starch in equal proportions, let it dry and wipe off the remaining starch with a dry soft cloth.

4. Oily stains on the carpet

Just like when removing stains from the surface of fabrics, it is necessary to get rid of any remaining grease as quickly as possible. Blot the stain with a paper towel until the towel comes out clean. Then treat the stain with industrial alcohol.
Use absorbent substances to remove fat: starch, soda, talc. Collect the remaining powder with a vacuum cleaner.
Make a soap solution by adding two teaspoons of dishwashing detergent to a glass of water. Then soak a sponge in this solution and rub the stain until it forms. lather. Use clean water to remove foam from the carpet. If the stain is not removed immediately, soak it with warm water, take dishwashing detergent and drop several drops directly onto the stain, and scrub the stain with a soft brush. Leave the applied product on for a while, but do not let it dry. Then use a rag or sponge soaked in a solution of vinegar and water to wipe the carpet and rinse with water.
A somewhat exotic method of removing greasy stains from a carpet using shaving cream or foam (not gel). The foam is applied to the stain, left for ten minutes and washed off with water. The entire process can be repeated several times to improve cleaning efficiency.

5. Grease stains on furniture

To one liter of water you need to add two teaspoons of lemon juice and one teaspoon of ammonia. Then soak a lint-free cloth in the resulting solution and treat the desired area, removing greasy stains. Then polish the surface of the furniture.
Grease stains can be removed from unpolished wooden surfaces using white spirit.

6. Grease stains on the floor

Grease stains can be removed from parquet floors using borax (sodium tetraborate). The area sprinkled with borax is covered with a blotter and ironed several times with a hot iron.
To remove a greasy stain from a wooden floor, wipe it with a cotton cloth previously soaked in gasoline.

7. Greasy stain on the wallpaper

If greasy dirt appears on the wallpaper, try removing it with a roll of black bread pulp.
Also, grease stains can be removed from wallpaper using gasoline and blotting paper. Apply a drop of gasoline to the stain, cover with a blotter and iron with a hot iron.

8. Removing greasy stains from kitchen surfaces

The kitchen is most susceptible to grease contamination. Over time, work surfaces, stoves and walls become covered with yellow stains of grease deposits.
Baking soda will help us get rid of them. We use baking soda as a mild abrasive. Make a paste of baking soda and water and apply to contaminated parts. Use the hard side of the sponge to wipe off the fat.
Grease stains can be removed with a solution of water and vinegar (proportion 4 parts water to 1 part vinegar). Leave the solution on the stain for ten to fifteen minutes. Rinse well with clean water.
Wooden kitchen furniture can be removed from grease stains by carefully treating the contaminated areas with a mixture of vegetable oil and soda (mix two tablespoons of soda with one spoon of oil). You need to rub with a soft brush so as not to scratch the furniture. Then remove the mixture with water and wipe the furniture dry.
A universal mixture will help you wash any kitchen surface; to prepare it, take a glass of water, add half a glass of vinegar and half a glass of vodka or diluted alcohol, add ten drops of eucalyptus, orange or other essential oil. Pour it into a spray bottle, shake the mixture well before use and spray it over the surface, wait ten to fifteen minutes and remove the corroded fat with a sponge.

REMEMBER!!!

When working with solvents such as gasoline, kerosene, white spirit, avoid contact with fire and ventilate the room well.
We told you only about traditional methods of dealing with greasy stains. Today, the chemical industry offers a diverse arsenal of products for removing stains, including those from various fats.
If you decide to use such stain removers, be SURE to read the instructions carefully and test the effect of the stain remover on an inconspicuous area of the surface or fabric.

If you wipe your kitchen furniture daily with a soft cloth or sponge dampened with warm water, and then wipe it dry, the grease can be easily removed. It will not be possible to remove multi-day fat deposits in this way.

You can use special cleaning products plastic coverings And wooden surfaces from fat: liquids, sprays and gels from Frosch, Faberlic House, L.O.C.™ (Amway) and others. But they are all quite expensive, and if you decide to use them, be sure to test the effect of the drug on a small piece of furniture in the least visible place.

You can remove grease from a wooden kitchen set using traditional methods, the effectiveness of which has been tested for many generations. Components for such products can be found in every home. Here are some recipes:

The most famous fat remover kitchen furniture– a mixture of baking soda and any vegetable oil in a 1:1 ratio. The resulting slurry is applied to contaminated areas and left for half an hour. Fatty deposits dissolve in oil, and soda binds the mixture of fats. The resulting lumps can be easily removed with a damp sponge. You should not rub dirty areas; if the grease stains are not completely removed, repeat the procedure.
The usual principle operates according to a similar principle. laundry soap. Soap shavings are dissolved in a small amount of water, the surface of the furniture is generously moistened with the resulting “jelly” and left for 20 – 30 minutes. Soap molecules, acting as a “lever,” lift grease from the surface of plastic or wood and keep it suspended, as a result of which it is easily removed with a wet rag or sponge.
A weak solution of ammonia works well to remove grease from kitchen furniture - you need to take a tablespoon of ammonia for 1 liter of water.
How to clean stains from chipboard

Contaminated surfaces are treated with this solution, and after a few minutes they are wiped with a damp and then dry cloth. True, after such a procedure, an ammonia smell will remain in the kitchen, but it will quickly disappear.
As a means to remove grease from wooden surfaces, you can use baking powder - it contains ammonium carbonate and soda. Baking powder is moistened with water and applied to grease stains. After 15 minutes, remove the pulp with a damp sponge and wipe thoroughly with a dry cloth. Relatively fresh traces of grease can be easily removed by applying a layer of talcum powder or baby powder (it contains talc and starch) to the stains, and then after 10 to 15 minutes, remove the remaining product with a wet cloth and wipe dry.

Doors accumulate the same dust and dirt as walls. This means you can clean and wash them in the same way. But only a few doors have a surface as smooth as the walls.

To remove surface dirt, wipe the door with a dry towel. Then wrap the broom in an old soft towel and go over the corners and crevices where dust accumulates. Clean intricate embossed jewelry with a soft toothbrush.

Wash the door once it is free of dust and dirt. If it is wood and stained, use wood oil soap mixed with water as directed on the package. Wash painted door A couple of home remedies will help.

Mix 4 liters of warm water, 1/2 cup of ammonia, 1/4 cup of clear vinegar and 1/4 cup of washing soda.
Dilute 1/2 cup of ammonia and 1 teaspoon of mild dishwashing liquid in 4 liters of warm water.

Dampen a natural sponge with the solution until it becomes completely soft. Then squeeze it out better. Wash the door from bottom to top, thereby avoiding streak marks. Trite small areas in a circular motion. Rinse the sponge more often and better so as not to smear the dirt. If the solution remains clean, there is no need to wash the door with water.

There is no need to remove door accessories to clean them. Use plastic wrap instead of a screwdriver. Secure it with electrical tape around the part you are going to clean. If it's metal (like a handle), use a metal cleaner like Buggy Metal Cleaner, which will clean any metal, including brass. If the accessories are glass or ceramic, plastic film not required. Wipe them with a rag soaked in alcohol, which will not harm your already clean door.

And a little more doors...

Each type of door requires an individual approach to care and products intended only for certain types doors, since the use of products that are not intended for care, for example, on doors with a varnish coating, can damage the varnish itself and their surface.

Interior wooden doors without varnish require the most delicate care - when cleaning such a door, you must first remove dust, and only then carry out the cleaning itself. Door cleaning products can be either specialized or so-called “folk remedies” - solution tap water with alcohol, approximately in the ratio of water - 90%, alcohol - 10%. After cleaning with this solution, you need to remove any remaining liquid with a dry cloth. For wooden doors with a varnish coating, after this cleaning procedure, you need to apply polish or other special remedy. The application of such products is necessary, since the varnish coating can become covered with cracks, and the polishing agent fills them, preventing the wood from drying out and the formation of even larger cracks.

From the history of doors.

The ancestors of the first wooden doors for buildings are doors made of sycamore or German maple, used in Ancient Egypt(3000 BC) and Ancient Persia(1000 BC). In Italy the most ancient arched door is, perhaps, an Etruscan door in Volterra (4th century BC). Behind long years existence, the door acquired a number of fundamental characteristics, such as an architrave (from Greek archi - elder, main and Latin trabs - beam), doorjamb, threshold, door panel, book door, etc. The architrave and jamb were transformed into today's door frame, the threshold remained virtually unchanged, and the ancient doors on pins - “turntables” - were modified into technologically advanced doors on hinges. However, "pin, rod", as structural element, which ensures the movement of the door leaf, remains unchanged.

As for the material that served as raw material for doors, iron and bronze gradually gave up their positions to wood. As far as the works of outstanding sculptors and architects that have survived to this day can be judged, wooden doors were already diverse in design and decoration. Walnut and oak, famous for their strength, were and remain the most used wood materials, while more valuable types of wood: maple, rosewood, pear, teak, ash, cherry and others were temporary favorites in different centuries.

Very often, unattractive greasy stains appear on MDF doors, especially in the kitchen. Removing traces of grease from wooden doors is problematic, because MDF and wood are materials with microscopic pores into which grease penetrates very deeply. But there are still several ways to wash the canvas.

Operating procedure

Even touching the door with seemingly clean hands can leave dirt behind over time. Therefore, interior doors, especially to the kitchen, should be washed at least once a month.

Greasy marks must be removed immediately, as dust sticks to the grease, the stain becomes larger, and the doors begin to deteriorate.

Surface preparation

First you need to get rid of stains of dirt and dust. This will greatly facilitate the process of removing oily marks. As a rule, in this case it is enough to simply wash the canvas with warm soapy water and a cloth. But when washing the canvas, the water should be removed immediately so that the door does not deteriorate. After washing, the doors are dried with a rag and wiped dry.

When the surface is ready to remove greasy marks, choose a cleanser and get to work.

The cleaning solution should not be left on for more than 5 minutes. Any of the products used can damage the MDF if exposed for long periods of time - leaving light spots or other unattractive marks on it.

After washing MDF doors, many housewives dry them with a hairdryer. This is much safer than wiping the canvas dry with a cloth.

When caring for MDF doors, do not use abrasive cleaners or products containing chlorine. Even washing powder may ruin the canvas. You should also not use metal scrapers or abrasive sponges, which will inevitably leave scratches on the surface.

Improvised products and household chemicals

There is no need to run to the store and buy expensive detergents. Sometimes unexpected products can help remove oily stains from your doors. For example, potatoes.

Raw potatoes should be cut in half and rub the dirt on the cut side. The juice should dry completely. After this, wipe the canvas with a dry cloth - all stains will go away. This method is ideal if the greasy marks are already very old. If after cleaning there are unsightly stains left, they can be removed by sprinkling with talcum powder. A little powder is applied to a napkin and wiped the treated area.

The dishwasher contains active ingredients specifically for washing away grease. It will also help to wash the MDF canvas. A spoonful of gel is dissolved in a liter of warm water and the stained area is wiped with a rag. After removing the grease, you should wipe the doors with polish so that there are no streaks left.

If the doors are not painted, then you should try cleaning them from grease with a homemade paste. To do this, white cosmetic clay is mixed in half with vinegar, and the gruel is rubbed onto the stain. When the paste dries, it is washed off with warm water. For these purposes, it is best to use white cosmetic clay, which is sold in every pharmacy and costs a penny.

Laminated doors are a little more difficult to clean. Stronger substances will help here. Can be used:

Pure table vinegar
Ammonia in its purest form
Acetone or acetone nail polish remover

A cotton swab is soaked in the selected liquid, and then the dirt is carefully wiped off. If there is a pattern on the doors, then first the chosen product must be tested from the bottom of the canvas so as not to spoil the decor. Solvents can also be used for these purposes, but they must be tested before starting work.

A great way to quickly remove grease stains from doors is a simple baking soda. Using the product is very simple: dilute 3 tbsp in 200 ml of warm water. l. soda A clean kitchen sponge is soaked in the working solution and the stained area is wiped well with it. Remains of soda are removed with a wet cloth.

A sure-fire way to quickly remove traces of grease from MDF is citric acid. To do this, you need to dilute 2 tbsp. l. acid in 200 ml of water, soak a cotton pad in the solution and carefully wipe off the greasy stain.

It happens that it is necessary to wash wooden doors covered with veneer. Veneer is a thin section of wood covered with MDF. The price of such a door is low, but it looks just great. To clean veneer sheets, do not use aggressive chemicals. In this case, a soft polish with wax is used.

You can also remove greasy stains without a trace from MDF canvas using medical alcohol or even vodka. A napkin is moistened in the substance and the dirt is wiped with it. After cleansing, the treated area should be rinsed with clean water and dried.

If you only have window cleaner on hand, you can use it to clean the MDF. A little product is sprayed directly onto the stain, and then the grease is immediately wiped off with a cloth. If you cannot remove the greasy stains the first time, then the procedure must be repeated again. Finally, the doors are wiped with polish.

Ordinary vegetable oil It also works great to remove grease stains and clean doors. Soak a cotton pad in the oil and then vigorously rub the stain with it. You need to rub until foam appears. Then the treated area is wiped with a dry cloth. The next step is cleaning with vinegar solution. To prepare it, you need to dilute table vinegar with water 1:1. Those places on the doors that have been cleaned are additionally wiped with a vinegar solution. All that remains is to wipe the canvas with a dry cloth, and the door will be as good as new.

Sometimes a simple school eraser can help with grease stains on doors. It is used as usual - the stain is wiped off. But first, it is recommended to carry out the procedure on an inconspicuous area of the door to see if the eraser will damage the door.