Every self-respecting housewife keeps the bathroom clean, carefully removing rusty smudges and limescale from the toilet bowl. Often this painstaking business takes a lot of time, and therefore it's time to learn how to clean the toilet bowl from rust and plaque quickly and for a long time, saving time for more pleasant chores.
Causes of rust and lime
Agree, a dirty toilet is disgusting for each of us, and in fact, most often we ourselves are to blame for its neglect. The main reasons for the appearance of stains and smudges:
- water quality;
- old pipes;
- malfunction and constant leakage of the tank;
- high level roughness of the toilet;
- lack of water-repellent coating;
- a large amount of calcium salt in the water;
- uncleanliness of households.
Rust and limescale have different causes. So, excessively hard water with an excess of iron will certainly cause traces. This situation will worsen if the tank is leaking. And if an excess of iron leads to rust, then an excess of calcium salt in the water will certainly lead to lime deposits accumulating at the rim of the toilet bowl.
However, the very purchase of a toilet can already cause the rapid appearance of stains. A rough version without a water-repellent coating and improper cleaning will quickly lead to scratches and clogging of dirt, rust and lime in them. The reason, rooted in the untidiness of the household, can gradually lead to serious and difficult to remove stains from urinary stone.
You can avoid its appearance if you introduce in the family the habit of flushing after each trip to the toilet or pouring out the pot by children.
Cleansing methods
It is important to wash and clean any dirt on the toilet as soon as possible. The fact is that it is very difficult to wipe off the ingrained rust without harming the coating of the bathroom. Cleansing at home can be done by a variety of methods, most of which are as accessible and effective as possible.
Household chemicals
It is easy to get confused in the offered toilet cleaning products today, being lost in the widest assortment. In fact, each of them belongs to one of four groups, created on the basis of differences in composition. Types of products for combating limescale and rust:
- alkaline;
- powder;
- acid-based;
- based on chlorine.
It is recommended to give preference here to gel-like and balm-like textures.... They are able to provide not only high-quality, but also safe cleaning without damaging the toilet bowl cover. Alkaline products include all products from plaque and rusty smudges, created on the basis of sodium. They are considered absolutely safe means that are easy to use and high degree efficiency. Among the well-known brands are the Dosya and Bref products.
Powder formulations are among the most powerful in their action. So, they are practically the only ones in whose power to cope with urinary stones. Using a stiff brush, the powder is rubbed into the surface, on the one hand, removing difficult stains, and on the other, creating microcracks for future accumulation of dirt. That is why drugs such as Pemolux and Flash should be used only in extreme cases. Chlorine-based products are also suitable for DIY toilet stain removal. Applying it from the inside, you can see how the plaque literally slides down, and the surface is disinfected.
Unfortunately, bleach and chlorine-containing products have a pungent odor, which leads some users to turn to improved products. This category includes the means "Comet" and "Silit".
Funds based on oxalic, formic, hydrochloric and other acids are not inferior in cleansing with bleach. Products such as " Santry "or" Dressing duck " do not have pungent odors, however, with prolonged use, they can negatively affect human health. Such products should be used periodically, not forgetting about the prohibition of their use when washing earthenware and ceramic toilets.
Folk remedies
As you can see, most of the ready-made cleaning products have certain restrictions on their use. Some housewives avoid such difficulties, deliberately using only folk sparing means in cleaning:
- so, one of the popular methods of washing is a solution of iodine with vinegar. A small container is filled with vinegar, a few drops of iodine and a pinch of baking soda. The solution is thoroughly mixed and applied to the surface to be cleaned for 6-8 hours, and then washed off clean water;
- an interesting and popular method is to pour it down the toilet or cistern Coca-Cola. Yes, exactly the drink that all children love without exception. Leaving the solution overnight, in the morning the bathroom is rinsed with water;
- according to the same principle, citric acid and soda are used in cleansing. One or another product is poured onto the contaminated surface and left to act overnight. In the morning, the product is washed off with water or rinsed thoroughly if cleaning took place from the inside of the tank;
- hydrogen peroxide in tandem with ammonia can be a good alternative to store products. The proportion is 5 ml of ammonia per 100 ml of peroxide. The solution is qualitatively applied to the surface and kept for about half an hour, after which it is cleaned with a medium-soft brush and washed off.
It is worth noting that traditional methods also have acids in their compositions. So, for cleaning in pure form, oxalic and hydrochloric acids can be used. As mentioned earlier, the method is not the safest, and therefore it is important to work in advance armed with durable gloves and a respirator. Inhaling such compounds is extremely harmful.
It must be said that ready-made and folk remedies are equally effective, however, those who want to get a quick result still turn to purchased products, because hardly any of them requires settling at night.
How to prevent rust and plaque build-up?
The appearance of rust can and should be prevented, especially since it is not difficult to do this. So, first of all, the owners of the apartment should establish a toilet float and completely eliminate the constantly running thin stream of water. Even hard water with a well-adjusted bathroom will have a much lesser effect on the appearance of rust and limescale... It should be noted that Replacing old rusty pipes will also help to fill the cistern with clean water without excess impurities.
Unfortunately, not everyone decides to take such a time-consuming step, but when done, the result pays for all the time and money spent.
If replacing the pipes is still not part of the plans, softening tablets placed daily inside the tank will help to improve the condition of the water. Additionally, such products envelop the bathroom with pleasant aromas, which plays an important role. More by capital method consider the installation of a water filter in the drain structure. It is not cheap, but when it is used, purification of water ceases to be a daily procedure with the participation of a housewife.
Sometimes even if all the recommendations are followed and preventive measures the bathroom continues to rapidly build up rust and plaque. Most likely, the problem here lies in improper cleaning sometime in the past, because a stiff brush already in several applications can thoroughly spoil the coating. If scratches are visible to the naked eye, the best solution will be the replacement of plumbing and careful adherence to the rules for cleaning it. Untouched by potent drugs quality coverage the toilet bowl can serve, pleasing with cleanliness and aesthetics, for more than one decade.
For more information on how to quickly and effectively clean the toilet, see the next video.
Cleaning the toilet bowl from rust
How to clean the rust in the toilet? The question is always relevant, because the toilet and the bathroom always characterize the cleanliness of the hostess, moreover, these 2 household attributes can be carriers of many infections due to their direct purpose.
Anyone feels deep disgust at the sight of a sloppy toilet with urinary stones, rust and a leaking cistern. It seems that the whole room is dirty, whether a person is squeamish or not, but such a toilet for the time being turns anyone into a neurotic, fixated on germs and dirt. Next, we will focus on ways to eliminate rust and the most common reasons its formation inside the toilet.
Rust on the toilet
There are many products to be found on the market today. household chemicals promising to easily get rid of rust stains. According to their consistency, consumers are offered: dry abrasive products, liquid sprays and thicker, gel-like liquids.
Toilet Cleaner Comet
So, how to clean the rust in the toilet? Abrasives are often criticized as they leave scratches on the surface to be cleaned, and this is true. If your toilet is new, then you probably won't want to ruin it right away. There is one more disadvantage of these funds - they are less effective than their alternatives in the form of gels and sprays.
Toilet cleaning spray from rust
It would be possible to recommend for a toilet containing Comet chlorine, but only if the contamination is fresh, but old and multiple contamination will need to be wiped off with force during cleaning, then, leaving the powder, make sure that it does not have time to dry out too quickly, otherwise it the cleaning function will stop. These actions are only suitable if your toilet has nothing to lose - its surface is already scratched or cracked.
Gel Bref for cleaning the toilet from rust and plaque
Sprays. Sprays are effective, but more on metal surfaces, tiles, but not for a bath or toilet, especially when it comes to heavily soiled household items.
Gel cleaning fluids. The gel is thicker, denser and more evenly distributed over the surface, does not dry as quickly as the first two categories of products and better corrodes dirt.
When buying any gel, choose one that contains acid. Chlorine-based products are more intended for disinfection than as stain removers, they can clean up something, but the more difficult the situation, the more useless they are. Lye works great in the kitchen, but the toilet and bathtub are not her strong points.
Toilet acid
For rust stains, the following acids are most often used: acetic, citric, oxalic and hydrochloric. There is such folk recipe cleaning: hydrochloric or oxalic acid, or a mixture of them, pour over the stain and leave for 25-30 minutes. Flush the toilet big amount water.
Hydrochloric acid for cleaning the toilet bowl from rust
Hydrochloric acid. Of all the above acids, it is best to choose hydrochloric acid... Hydrochloric acid will definitely clean your toilet, no matter what kind of dirt it has to face, be it rust, urinary stone or lime, fresh or old multi-layered mud build-up. It doesn't matter if your toilet is new and sleek, or cracked and old - hydrochloric acid will do the job, but if you choose it, it is better to buy a ready-made cleaning agent containing hydrochloric acid. The concentration of the aforementioned acid in these products is the safest for home use, while its cleaning properties remain brilliant.
Toilet bowl cleaning gloves
Cleaning with this tool, it is necessary to wear gloves, which the manufacturer himself warns about, but even if, by some accident, a drop of such a cleaning gel gets on your skin, it will not cause you serious damage, and if such a nuisance happened with a concentrated solution of hydrochloric acid, damage to you could would be irreparable, but accidents always happen.
You can neither store nor use a solution of concentrated hydrochloric acid at home.
Hydrochloric acid contains Cilit Bang, a special toilet gel.
Cillit bang toilet cleaner
The liquid has a beautiful green color, gel-like consistency (not spray) and is only used for toilets. There are other Cilit Bang products used for bathtubs, tiles and other surfaces, but they are much weaker, although the instructions for them say that the fluids can be used against rust.
Choosing toilet rust removers
Perhaps, in addition to Cilit Bang, you will find other brands of cleaning products from other manufacturers containing hydrochloric acid - read the composition of the product on the bottle. As a rule, if the cleaning liquid contains this acid, then this tool will not have a universal character, but a purely special one, for example, only for a toilet bowl.
Use a strong acidic cleaner to clean inner part the toilet, and use glass cleaner to clean the outside. It can easily remove dust and other surface contaminants, leaving your toilet shiny and clean.
Traditional methods of dealing with rust
How to clean a toilet bowl from rust folk remedies? There are always folk remedies and for all occasions, however, they are not always effective enough, but for lovers of folk wisdom, several recipes are given.
Rust remover vinegar
How to clean a toilet bowl from rust with vinegar? Take a rag, soak it in vinegar and cover the stain to be removed, leave the rag to eat away at the rust for a while.
There is another way to clean rust in the toilet: 70% vinegar is heated to a temperature of 40 ° C, then the toilet is poured with it. This method is good for cleaning the toilet bowl from limescale and stone.
A solution of vinegar and baking soda to remove rust on the toilet
The procedure is carried out in the evening so that the contaminants are exposed to the acid all night. It is recommended to add 1 tbsp to vinegar. l. soda to increase its cleansing power. Iodine is mixed with 9% vinegar.
Citric acid is an excellent anti-rust agent
Citric acid can be used instead of vinegar. Pour 2 bags of acid into the toilet and do not rinse for 2 hours.
Ammonia and hydrogen peroxide are spot removers on duty. folk methods... To clean the toilet bowl from rust and deposits, ammonia mixed with hydrogen peroxide in the proportion of 100 ml of peroxide to 5 ml of ammonia. The resulting solution is poured over the spots and left for half an hour.
Hydrogen peroxide is used to remove rust
Another effective, but highly controversial, way to clean the toilet of rust, urinary calculus and plaque is to apply electrolyte to car batteries.
It is impossible to ignore the pollution of the toilet sink: disgusting appearance, bad smell in room. During cleaning, fresh dirt is first washed off, but rust is more difficult to clean, eating into the enamel. Rust and stubborn stains on the toilet can be removed with the help of available tools.
Folk remedies have the same effectiveness in fighting rust as specialized detergents. Most of them remove dirt in a mode that is more gentle for the enamel of the sink and are not as harmful to humans when cleaning as artificial chemical compounds.
Preparing to remove rust from the toilet:
- prepare thin medical gloves for hands or heavy gloves for household work;
- you need to open the windows, the door to the toilet room for ventilation, turn on the hood or toilet fan;
- prepare a container to obtain the desired cleaning solution.
Hydrogen peroxide and ammonia
Prepare a solution of 5 grams of ammonia and 100 grams of hydrogen peroxide. Apply the resulting solution to hard-to-reach and particularly rusty places for half an hour.
After the time has elapsed, clean the surface with a stiff brush, rinse with clean water.
Battery electrolyte
If you have this inorganic acid, it can be used for, moreover, avoiding unpleasant contact with the surface.
The electrolyte should be kept on the stains for half an hour, then the acid should be thoroughly washed off.
Hydrochloric acid
A small amount of acid should be applied to the stains and left to work for 20 minutes.
Hydrochloric acid is an aggressive substance! When using it, you should wear gloves, a respirator and it is desirable that the room is well ventilated.
Wash off the product hot water... Boiling water cannot be used for the toilet sink, it may split.
White
Dissolved Whiteness will be less effective. In preparation for cleaning, you must shut off the water supply to the toilet, which will help prevent premature flushing of the cleaning compound. If it is possible to drain the water from the tank, this should be done.
The whiteness is poured into the toilet sink and left on long time, for example, at night or at least for a few hours. If it is not possible to leave the liquid in the toilet for a long time, then it is kept for an hour. At the end of this time, remove old stains with a stiff brush, then rinse with clean water.
Vinegar essence
The liquid should act within 15 minutes. Need to wet thick fabric with acetic acid and cover the toilet bowl with it. After the time has elapsed, it is necessary to grind the acid residues with a stiff brush, removing especially strong dirt, remove the remnants of the product and rinse with running water.
You can also use vinegar to prevent the formation of rusty smudges in the toilet: periodically pour vinegar into the cistern.
Lemon acid
Citric acid is often used in home cleaning, including helping.
It is necessary to make a concentrated solution citric acid and rub the surface with a stiff-bristled brush.
Combination of acetic and citric acids
These organic acids are effective in dissolving rust and various stubborn stains.
The proposed method is suitable for those who do not have a brush or other means for mechanical cleaning of stains at hand.
Dissolve two sachets of citric acid in a glass of water. Spray the resulting solution over the surface of the toilet bowl with dirt. Pour acetic acid into the tank. When mixed, these liquids will enter into a chemical reaction that will successfully dissolve rust stains. Allow to react for about five minutes or until characteristic foaming has passed.
With this cleaning, not only the stains will go away, but also the blockage in the pipe.
Dry oxalic acid
It works quickly and removes stains, stains and rust stains without a trace.
Cleaning should be done with gloves!
Dip a damp cloth for cleaning in oxalic acid and grind on a rusty place.
For convenience, you can use a liquid composition: dissolve the acid in such a way as to obtain a five percent solution.
Caustic soda
If there is no time for cleaning, you should pour caustic soda into the waste tank and rinse. It is necessary to carry out such a procedure periodically.
There is one significant drawback of this cleaning method: it is quite difficult not to damage the enamel with soda, as with other abrasive agents.
Carbonated drinks (Coca-Cola) and toothpaste
Experienced housewives prefer this tool. This drink helps in the fight against old toilet stains, while improving pipe patency. Use liquid in the same way as described for Whiteness.
If the rust stains are very recent, a thick strip of toothpaste will help remove them. For this purpose, it is better to use a bleaching agent. Apply the paste in a thick layer, let stand for 5-10 minutes, rub with a stiff brush and rinse off the remains with running water.
To prevent the appearance of rust in the toilet, it is recommended to carry out daily.
Even the most ideal housewife can get rust in the toilet. The brown stripe in the center of the bowl spoils the aesthetic look.
You can prevent its formation. There are many proven recipes for fighting rust.
Causes of occurrence
The main cause of rusty streaks is pipelinemade of non-galvanized steel. In old houses, almost all pipes are made of her ... Over time, they rust, together with the water, the rust gets into, from where it flows into the bowl.
The way out is to replace the plumbing. Pipeline must be replaced with polypropylene or metal-plastic.
The second reason - poor quality water... She carries with her a lot of substances, including those that destroy the walls of pipes and toilet bowls. Iron salts are components that cause rust formation.
The problem can be solved by using special tablets. They dissolve slowly in water, give pleasant aroma and change its color.
Third reason drips in the bowl - poorly adjusted bowl. If water is constantly flowing out of it, it is necessary to adjust the float. If it is broken, replace the tank.
These methods will prevent further rust formation. But what to do with the rusty streaks that have already appeared?
There is not always money to replace plumbing. How to remove it and tidy up the toilet? Folk and professional remedies are used to remove rust.
Alkaline chemistry
Alkali-based products are available as liquids. They have an increased pH value, Ph is more than 7.
Alkaline formulations are developed on the basis of soda and chlorine. The only negative is the strong smell.
Work with alkaline chemicals should be in gloves and a respirator, brush.
How to clean the rust in the toilet? Domestos or Dosia cannot cope with the problem. Funds fight limescale, greasy marks and yellowness. However, they cannot cope with rust.
You can clean it with Bios, Basix from DeLaval, Sif.
How to get rid of rust:
- Delete bowl liquid rags.
- Wipe the surface with a dry cloth.
- Apply the cleaning agent under the bezel. Spread the dripping liquid evenly over the bowl.
- Wait for the time given according to the instructions.
- Rub actively with a brush and rinse with water.
It may not be possible to wipe off rust the first time turn out ... Repeated use of household chemicals will be required.
Acidic substances
Acid is more effective than alkali... Apply in advanced cases,not regularly, damage to the bowl is possible.
How to clean: Silite, Sanfor and acids.
How to clean rust from a toilet:
- Silith is the best. Fights rusty streaks very well. Silit is very liquid; when spraying the surface, abundant foam appears. After application, wait 5 minutes, rub with a brush, rinse with water.
- Sanfor - antibacterial agent... Perfectly cleans and removes rust quickly.
- Hydrochloric acid in the composition is harmfulfor humans, but effective in the fight against rust. To clean it, you need 20 gr. An acidic substance is treated walls the bowls are washed off after 20 minutes.
- Phosphoric acid removes any stains in the bowl. 5–7% solution is applied for 15 minutes, thoroughly rubbing the surface. Phosphoric acid is used in apartments with metal and plastic pipes.
- Oxalic acid is a powder. Remove excess liquid from the bowl, sprinkle the substance on wet walls. Wait 10 minutes and rinse. In case of severe pollution, a solution of hydrochloric and oxalic acid is used for the toilet, mixed in equal amounts, washed off after 20 minutes. The method is not suitable if the pipeline is plastic.
Acidic toilet bowl cleaners are effective against mold and limescale. They are used sparingly, do not scratch faience and do not have a pungent odor.
Abrasive fine-grained products
Red streaks on the toilet give an unkempt look to the washroom. Abrasive substances are cheaper than acid and alkaline compounds, they are cleaned just as well.
They contain particles that quickly eliminate red spots.
The following compounds will help remove rust from the toilet:
- Pemolux helps to speed up the removal of rusty streaks. Gently cleans surfaces, does not contain harsh chemicals. Does not leave streaks and does not have a strong odor. Pemolux will not help with old dirt.
- Sarma is a well-proven cleaning agent. Quickly removes rust, retains the whiteness and shine of the bowl for a long time. Sarma "Anti-rust" kills bacteria under the rim. Application: remove water, sprinkle surfaces with cleaning powder, wait 15 minutes.Rub activelypolluted places, wash off with water.
- Sanita "Antirzhavchina" will become an irreplaceable assistant in cleaning the bathroom. How to wash: the contaminated areas are treated with gel, left for 15 minutes. The product foams - this is the reaction of the composition with rusty spots. Sanita works quickly and efficiently.
It is often not recommended to wipe off dirt with abrasive compounds. After applying them, the surface becomes rough. The toilet gets dirty faster.
Improvised compositions
Washing the bathroom is not the most pleasant experience, but if done regularly, you can avoid the formation of red spots and the accumulation of bacteria under the rim.
For the bathroom, formulations made at home from improvised means are used.
How to get rid of rust:
- Mix hydrogen peroxide and ammonia in a ratio of 1:20. Apply the made composition to dirty areas. Rub with a brush, rinse off after 30 minutes.
- Battery electrolyte is an inorganic acid. Treat stains with composition, soak on dirt for 30 minutes. Rinse the cleaned toilet well with water several times.
- Vinegar and salt. A thick mass is prepared from the ingredients. The composition is used to treat the bowl. Rub the entire surface in a circular motion, rinse with water. A worthy alternative to vinegar is citric acid.
- Toothpaste is an uneconomical option for removing impurities. It is used internally and externally. Apply a little paste on red spots, rub with a brush.
- Do not remove water. Rinse the toilet with clean water. Pour out the bottle of Whiteness. Leave on for 8-10 hours. In the morning, rub the surfaces, rinse. To achieve a positive result, repeat the process.
With folk remedies, you also need to work with gloves. The choice of the composition depends on the degree of pollution of the toilet bowl.
Tank wash
A reddish-brown plaque forms not only on the toilet inside the bowl, it covers the walls of the tank. It will be possible to clean it with the help of household chemicals and household compounds.
How to clean the toilet cistern:
- Shut off the water supply, drain the remaining liquid. Be careful when removing the tank cap. Cover the inner walls with Whiteness or another cleaning agent. Work carefully to avoid touching plastic and silicone parts. Many aggressive drugs will corrode these materials.
- Leave the composition to act for 20 minutes.
- Pour water into the tank, rinse the tank well
except liquid formulations, the tank is well washed with special tablets. They are the most harmless, do not damage rubber and silicone parts.
From folk remedies, carbonated drinks are used in which there is orthophosphoric acid. The tank is filled with Coca-Cola or Pepsi. Leave for 2 hours with light contamination or overnight if all walls are covered with rust.
Cleaning errors
Do not reuse the soft sponges and rags used to clean the toilet. They accumulate pathogenic bacteria and fungus. Throw away after cleaning.
Toilet bowl cleaners are selected based on the type of pollution and the state of the toilet. Old plumbing must not be treated with strong chemicals.
Reduce the use of abrasive compounds up to 2 times a month. Cleaning powders destroy the protective coating of the plumbing.
Prevention
Cleaning rust in the toilet is not difficult if you know the tricks. But it's easier to prevent it from appearing and never come back to questions about its removal.
Prevention:
- Clean the toilet daily with a mild detergent that does not contain aggressive substances.
- Treat the bowl with bleach once a week. This is necessary for disinfection.
- Use strong chemicals like Silit, Domestos or Whiteness once a month.
- Check the condition of the pipes. If they are rusty, replace them with more modern ones - plastic ones.
- Treat not only the visible part, but also the area under the rim. A lot of bacteria collect in this place, rust is not always noticeable.
Choosing a toilet bowl, you must give preference to porcelain. This type has a smooth surface. Pollution does not stay on it for a long time.
Do not neglect your own hygiene. Many harmful bacteria collect in the toilet bowl.
If you do not want to waste precious time on dirty work, they hire trained people from a cleaning company. For a reasonable fee, they will quickly get the job done.
In almost every home, at least once, they came across a red strip in the center of the toilet bowl, in the place where the water flows from the cistern. Even those who regularly monitor hygiene toilet room are forced to look for ways to deal with rust on the toilet. But available and effective ways it does quite a lot. How to clean the toilet from rust with folk remedies can be found in this article. Nevertheless, removing rust only on the toilet bowl is quite a thankless task, since it will soon reappear. To fix the result longer, you need to learn how to clean the inside of the toilet cistern.
- Why does rust appear in the tank
- Methods for cleaning plumbing
- Handy toilet cleaners
- Cleaning the inside of the tank
- Prevention
Why does rust appear in the tank
Water is to blame for everything. Almost everywhere it contains a lot of iron salts. If this is the case, then the only option to somehow remedy the situation is to add special tablets to the tank. Usually, they are blue or green in color, have a pleasant aroma, but most importantly, they do not allow sediments to appear on the walls of the toilet bowl.
Old rusted steel or cast iron pipes can also cause rust to appear. V modern technologies construction has long solved the problem of rust by choosing polypropylene or metal-plastic pipes... Thus, if it is possible to replace the old metal pipes, then it is better to do it right away, otherwise you will have to look for another answer to the question: "how to clean rust from the toilet."
Finally, if there are problems in the tank itself, then a thin trickle will flow over the bowl constantly. Rusty stripes will be exactly along the edges of this stream. To deal with this, it is necessary to adjust the float in the tank itself or replace it completely, if necessary.
In conclusion, I would like to note that rust does not "stick" well to smooth surfaces, which is why porcelain and earthenware toilets with a glazed surface are the most popular. If the toilet itself is already old, then the surface of the bowl has already become rough, due to which limescale, rust and urinary stones adhere to it more easily. Perhaps, the right decision will change the plumbing completely. In addition to the fact that you do not have to wash the toilet bowl from rust, it will be possible to get rid of the old one, which is long years has ceased to be hygienic.
Methods for cleaning plumbing
The most simple option will use household chemicals that are sold in almost any store. Today they are trying to produce complex products that allow you to simultaneously get rid of both limescale and rust. Since most of them are made on the basis of acid or alkali, they are quite aggressive not only in relation to plumbing, but can also be hazardous to health in case of contact with the skin or mucous membranes. Inhaling vapors of such a product is also not recommended. When cleaning, do not neglect rubber gloves to protect your hands.
In no case should you mix two agents of different composition, as harmful chemical reaction with the release of, for example, chlorine.
There are many rust removers, but the most famous are Domestos, Sanfor, Sillit and many others.
Handy toilet cleaners
The most common toilet cleaners available are organic acids such as acetic, citric, and oxalic. If the latter is hard enough to find, then the first two can be easily found in every home. You need to take a piece of an old rag, soak it in acid and put it on top of the stain. Leave for 10 minutes and rinse cold water... The toilet will be clean. If this does not help, then we advise you to try again.
Instead of an organic acid, you can use an inorganic acid, such as an acid from an old battery. This is done in exactly the same way. It is only necessary to use gloves!
Everyone talks about the dangers of carbonated drinks, but no one talks about their benefits. They are excellent at removing rust, limescale and scale. If used regularly, they also destroy the fat deposits in the sewer pipes.
Cleaning the toilet with folk remedies
You can try to squeeze out some toothpaste and rub it over the rusty surface. It will not help get rid of the obsolete rust stain, but with fresh, which was formed after a long absence of the owners, it is quite possible.
Cleaning the inside of the tank
How to clean the toilet cistern - everyone should choose for himself, because there are many ways to do this.
Method number 1
To treat the surface of the toilet, you can use any of the above tools, depending on availability and preferences.
Method number 2
Any acid, organic or inorganic, carbonated drinks or specialized household chemicals that are sold in the store, must be poured into a bowl (at least 500 ml), left for 2 hours, thoroughly cleaned with a brush or brush, and then rinsed off twice.
If the toilet has been replaced, but the cistern remains old, the likelihood that history will repeat itself is very high. It is necessary to thoroughly clean it from possible rust and other deposits.
Cleaning the Coca-Cola toilet
Prevention
There is a lot of information on how best to clean the surface of the toilet bowl, as well as the cistern from rust and other deposits. Not only articles and photographs can help, but also video materials and all sorts of life hacks and master classes.
Nevertheless, it is always necessary to follow the prevention, namely after each use of the toilet, it is necessary to flush the water several times. True, this is not very economical and can significantly increase the readings on the meter at the end of the month, especially if several people live in the apartment.
Keeping the toilet clean
If the high water consumption does not suit you, then you can use special tablets that protect the surface of the toilet bowl from rust. It also helps maintain a pleasant scent in the washroom.
The most correct solution is to prevent the appearance of rust. This will be facilitated by regular cleaning and cleaning of the plumbing.
Cleaning the toilet with special cleaning agents
Cleaning the toilet bowl from old rust and dirt
Using cistern tablets in action
Cleaning the toilet bowl with special products
Cleaning the Coca-Cola toilet
Cleaning with folk remedies
Keeping the toilet clean
Similar materials
