The only one-component adhesive that meets the most stringent ANSY TYPE II standard for moisture resistance
- Provides strong initial set and short pressing times
- Ensures the strength of the adhesive joint is higher than the strength of the wood itself
- Non-abrasive: will not damage cutting tools during finishing work
- High resistance to heat and solvents
- Resistant to acoustic vibrations
- Remove with a damp cloth before drying
Physical properties
- Base: cross-linked polyaliphatic emulsion
- Condition: viscous liquid
- Color: cream, after drying translucent cream
- Dry residue: 48%
- Viscosity: 4000 mPa*s
- Acidity ph: 3
- Flash point: 100°С
- Freeze resistance: stable
- Shelf life: 24 months in original packaging at 20°C
- Moisture resistance class: D3
Directions for use
- Application temperature:+ 12°C
- Operating temperature:-30...+50°С
- Consumption: 180 g/m2
- Work time: 10-20 minutes depending on conditions.
Working surfaces must be dry, free of oils, grease, dirt, loose old paint and any other materials that reduce adhesion - Cleaning: clean with water before drying. After drying, excess is removed mechanically
Peculiarities
- Freezing does not change the structure of the glue, but leads to its thickening
- After long-term storage Before use, to restore the properties of the glue, mix thoroughly
- Meets the requirements of ASTM C557 (USA) and AFG-01 D3498 of the American Plywood Association, DIN EN204 D3
Use for underwater connections
Precautionary measures
Use only in well-ventilated areas. May cause skin irritation. If dizziness or other unpleasant effects occur, you need to go to Fresh air, consult your doctor. If glue gets into your eyes, rinse them for 15 minutes. running water. If glue gets on your skin, wipe it off and wash your skin with soapy water.
Keep the glue out of the reach of children!
Use only for its intended purpose.
Packing
Store and transport at t > 5°C.
Some of the most popular adhesives on the modern Russian market are those manufactured under the Titebond brand. They have unsurpassed moisture resistance qualities and can have a transparent or creamy structure. For more than 70 years, the American company Franklin International has been supplying the world market with a wide range of adhesives that are designed for gluing different types of wood.
Active research activities made it possible to introduce the most modern technologies production and produce high-quality carpentry adhesives that are intended for professional use. With their help you can easily install parquet board in residential and office premises, restore old coatings that have failed, and carry out a fairly wide range of work.
Today in the assortment you can find more than 25 varieties of adhesives for industrial use, which have the Titebond brand. The most common among domestic consumers are one-component universal moisture-repellent wood adhesives, which must be worked with at positive temperatures. If done correctly preparatory work, thoroughly clean the surfaces of the products to be glued, and also keep them under pressure for a certain time, then you will be able to achieve the promised positive result, having received a durable adhesive seam with moisture-repellent properties.
Characteristics of Titebond II Premium Wood Glue
Titebond glue, which you can distinguish by the designation II Premium Wood Glue, sold in blue packaging, is a moisture-resistant composition that meets strict American water resistance standards. It is used for gluing hard and soft wood. In carpentry, you can make surface and butt joints, as well as glue paper film, laminate, veneer, chipboard, MDF, fiberboard and plywood.
This composition is used in furniture production, ensuring the strongest possible adhesion even with short pressing times. You will be able to obtain greater bonding strength, which is even higher compared to the wood itself.
Physical properties of Titebond II
Titebond II glue has an amount of 48%, viscosity is 4000 mPa*s. Professionals and home craftsmen may be interested in such an indicator as acidity. For the described glue mixture it is 3 pH. In its original packaging, the glue can be stored for 24 months at a temperature of +20 °C. The composition can be used when minimum temperature+12 °C. For 1 m2 it will take approximately 180 g.
Additional features of Titebond Premium
Titebond II Premium adhesive is resistant to high temperatures, solvents and acoustic vibrations. This composition is a polyaliphatic emulsion with strong cross-links. Products after gluing can be used over a wide range of temperatures, which vary from -30 to +50 °C. After drying, the composition forms a film that has a transparent creamy tint.
Instructions for use
Titebond II adhesive should only be used in positive temperatures. Before gluing, the surfaces of products should be cleaned of oils, dirt, dust and grease, as well as other substances that would interfere with adhesion. It is necessary to free the surface from old paint. Before use, the glue is mixed, and its drying time can vary from 10 to 20 minutes. During this period, excess composition must be removed with a damp rag, and after drying, the glue can only be removed mechanically. Even after freezing, the composition will remain stable, but may change structure, becoming slightly viscous.
For reference
The one described for wood is not abrasive and is not capable of damaging the surface of cutting tools after processing products. You should remember the toxicity of the composition, which indicates the need for use by a master individual funds protection.
Glue composition
Titebond glue can have different bases used in production. Ingredients may include aliphatic resin, polyurethanes, polymers, proteins and water.
What else you need to know about Titebond wood glue
Wood glue Titebond brands characterized by indestructible cross-links, they create a stable chemical viscosity of the mixture. After drying, the layer is resistant to freezing, but it is worth remembering that it is flammable at a temperature of 100 ° C.
The composition adheres to surfaces instantly and firmly; the products only need to be pressed for some time. Titebond is resistant to elevated temperatures and solvents, and is easily removed before drying. The only drawback is the inability to use glue on surfaces that are wetted with water.
Characteristics of Titebond III glue
Glue for Titebond wood presented in another variety, which is designated as III. This polymeric water-dispersion composition is supplied in packages of different volumes for the convenience of the consumer and is intended for gluing veneer, fiberboard, plywood, wood, plastic, chipboard and MDF. The composition can be used for interior and exterior work, which makes it universal. The adhesive is water-resistant and can perfectly join laminated veneer, plastic and other above-mentioned materials. Application can be done using hot or cold methods, the composition is non-toxic and has no solvents. It can be used even at low temperatures.
Instructions for using Titebond 3 glue
Titebond 3 adhesive can be used at a minimum temperature of +8 °C. Approximately 190 g of composition will be needed per 1 m2. Within 10-20 minutes you can change the position of the part, which will depend on external conditions. Before applying the adhesive, surfaces should be checked for moisture and cleaned of dirt, loose material and other materials that could reduce the intensity of adhesion. It is noteworthy that this Titebond wood glue can be used for gluing products that will come into contact with food during operation. It is not recommended for use on underwater connections.
The composition is allowed to be used only in intensively ventilated areas, and if it comes into contact with the skin, the mixture may cause irritation. If you experience dizziness and unpleasant effects, you should immediately get into fresh air and, if necessary, consult a doctor. If Titebond glue gets into your eyes, you should rinse them with running water for 15 minutes. If it happens that the glue gets on the skin, you should remove it and wash the area with soapy water. The viscosity of the composition is 4200 mPa*s. Dry residue is 52%, density is 1.1 kg/l, acidity is 2.5 pH.
Conclusion
According to experts, Titebond adhesive is the only one-component composition that meets the ANSY TYPE II standard for moisture resistance. You can purchase Titebond composition iii in a conveniently sized package that holds from 1 to 20 kg. If you need a small amount of glue, you will not have to overpay. Since it is intended for professional use, you can be sure that you will receive the highest quality. For example, if you have not dealt with veneering before, then the composition described will allow you to cope with the work quite simply.
TITEBOND II Premium Wood Glue is a leading brand. A one-component adhesive that meets ANSI Type II water resistance standards. It is ideal for outdoor applications including garden and outdoor furniture, birdhouses, mailboxes, picnic tables, etc. The adhesive is characterized by strong initial adhesion, high curing speed, it forms a strong connection, is easy to process, allows indirect contact with food (gluing cutting boards), ideal for use in high frequency adhesive systems. The range of its application is extremely wide: from gluing at home to cold, hot and HF presses in furniture factories.
Meets ASTM D-4235 requirements
Product Features
- First adhesive to meet ANSI Type II water resistance requirements;
- For outdoor use;
- Perfectly processed;
- Does not affect finishing coatings;
- Allows indirect contact with food products;
- Ideal for use in HF and hot presses;
- Easy to clean with water;
- Load group according to EN 204/205 1K/D
Physical properties
The basis: Cross-linked PVA CalculatedVOC:
5.5 g/l
State: Liquid White point temperature: 12.7 °C
Color: Honey yellow Dry residue: 48%
Dry film: Translucent, yellow pH:
3,0
Density: 1.09 g/cm 3 Viscosity: 4000 mPa*s
Freeze-thaw cycles: Stable
Shelf life 24 months in original packaging at 23 °C
Bond strength per ASTM D-905 (hard maple)
Directions for use
Application temperature: above 12.7°C
Work time: no more than 10 minutes (at 21°C and 50% humidity)
Total build time: 10-15 minutes (at 21°C and 50% humidity)
Minimum consumption: approximately 162 g/m2
Applied pressure: it is enough to combine the surfaces to be glued together (7-10 kg/cm 2 for soft wood, 9-13 kg/cm 2 for medium wood, 13-18 kg/cm 2 for hard wood)
Application method: plastic bottle with a flat spout, application by roller or brush.
Cleaning: Undried glue is removed with a soft cloth. Dried glue is removed mechanically.
Restrictions:
Titebond II Premium Wood Glue is not suitable for use in conditions of constant dampness or below water level. Not used for load-bearing structures (trusses, rafters, load-bearing beams). Do not use when the temperature of the adhesive or parts is below 12.7°C. It is recommended to test the adhesive on samples of the materials being bonded.
Best before date: It is best to use the glue within 24 months from the date of production. It is recommended to stir the glue before use. The glue is stable in freeze-thaw cycles, but before use it must be heated at room temperature without additional heating devices and mix thoroughly at low speed.
Titebond glue is designed for working with wood. Its production is carried out by the American concern Franklin International, but also on Russian markets it has found widespread use. Manufactured according to the AFG-1 standard, which confirms it high quality. The company's products embody innovative technologies. Titebond adhesive is available in many varieties, which are produced using high-tech equipment and are suitable for work in any field.
Titebond wood glue is a professional composition that is actively used for industrial purposes and at home.
Titebond glue contains:
- Aliphatic resins.
- Polyurethanes.
- Polymers.
- Protein.
- Water.
- Synthetic rubber.
The structure of the product is abrasive, therefore cutting tool will not be damaged or scratched during subsequent sawing of wooden products.
Note! In liquid form, Titebond adhesive has good chemical viscosity, which is explained by the enhanced cross-links of the substance. This makes its consistency optimal, not runny, which makes installation easier and simpler.
After hardening, assembly adhesive Titebond becomes frost-resistant, so it is suitable for application to any surfaces and objects that will be used outdoors. Among positive properties Titebond glue is also heat resistant, but it can become flammable if the operating temperature range is exceeded from +100 degrees. In this case, the composition is flammable. It will be good to withstand temperatures up to +40 degrees.
Other features of Titebond glue:
- Tolerates exposure to solvents.
- Easily removed from the surface until completely dry.
- Initial setting occurs after 10 minutes.
- The viscosity of the glue is 4000 mPa/s.
- The acidity pH is 3 units.
- Suitable temperature regime for working with glue + 10-12°.
- Consumption is 170-190 g/m².
After drying, the dry residue is half of the initial volume. If all storage conditions are met, the glue can last for 2 years after opening the package.
Note! Consumption of the composition will depend on the conditions environment, as well as the type of wooden surface and the degree of its porosity.
Advantages and disadvantages
Titebond wood glue for wood and wooden surfaces is in great demand and popularity due to the following advantages:
- It has a world-class certificate, which confirms its high quality and reliability.
- The finished joint has high mechanical strength, higher than that of the wood itself.
- Titebond glue does not contain toxic substances, therefore it is environmentally safe. Glued parts can be used in residential premises.
- The adhesive can be used in the production of furniture, as well as in the construction industry, providing a highly durable connection of materials.
- The glue does not cling to metal, so you can choose any handy tool for work.
Note! Titebond wood glue also has a few disadvantages. It will not be able to reliably glue wet and painted surfaces. When using it, you must maintain the optimal temperature conditions, otherwise this will affect the quality of installation.
Scope of use
Titebond glue has a very wide range of uses:
- Can be used for gluing wood of any type, species, age.
- In everyday life it is used for gluing laminate, cardboard, paper, plywood and others.
- In the woodworking industry, including for the manufacture of doors, decorative flooring, furniture.
- In the field of design - for artistic decoration of interior items with wooden parts.
- When conducting repair work in the house. It can serve as an analogue of sealant and provide water resistance to joints.
There are varieties of glue that have narrow specialization. For example, glue for repairing musical instruments, a product for restoring antiques, household utensils, and wooden souvenirs.
Varieties
There are about 25 types of wood glue, which are produced in series:
- Original Wood Glue 5064 473 ml usually comes in a red bottle. Used to work with musical instruments, as it does not affect the sound due to its solid consistency. Suitable for both wind and string instruments.
- Titebond II Premium 5004 is a one-component, moisture-resistant adhesive, available in blue packaging, with fast setting, solvent resistance and a short cure time. The finished seam of Titebond 2 glue is elastic. Typically this variety is used for making benches, garden furniture, mailboxes. The non-toxic composition allows it to be used to repair various household items, even those that have indirect contact with food.
- Titebond 3 is a product available in green packaging that is particularly durable and water resistant. It is suitable for gluing items that have direct contact with food. There are no toxins or solvents in the composition; only safe polymers are used as a basis. Titebond 3 adhesive can even be used for gluing items that will be used in sub-zero temperatures. You can work with this composition by cold or hot gluing. The basis of the glue is a water-dispersion mixture, which makes the composition universal. Using glue you can glue not only wood, but also plastic and other materials. Consumption is 190 g/m². Polymerization times vary between 10-20 minutes.
- Heavy Duty is a very strong compound that is suitable for bonding concrete, brick, fiberglass, ceramics, stone and even hardboard. High degree adhesion is ensured by the synthetic rubber included in the composition. With this glue you can work even with wet and frozen wood. The frozen seam has good elasticity, due to which it is not afraid of vibration and mechanical influences.
Features of use
Before gluing wood to another substrate, you must first prepare both surfaces. To do this, they are cleaned of debris, dust or residue of other substances. Then you need to shake or mix the glue in the bottle and apply it to the base with a convenient brush.
Then fasten both surfaces.
It will take the technician 10 minutes to correct their position or remove excess glue.
Note! If glue accidentally gets on the skin, it is enough to remove the dirt with simple clean and slightly warm water.
Titebond wood glue increases the efficiency, quality and speed of any work, including repair, decorative, and production.
Application and properties of Titebond glue (2 videos)
Every craftsman who works with wood knows how important it is to choose good glue to connect individual parts of a structure into a single whole. The quality of the finished result often depends on how correctly this choice is made. Titebond glue is an excellent choice that meets several important criteria at once:
economically used;
provides a strong connection;
It is environmentally friendly and safe.
Titebond is manufactured by Franklin International, which has a well-deserved reputation as a reliable and reputable manufacturer of wood adhesives for over 75 years. With your success trademark owes exceptional product quality, flexible pricing policy and the close attention paid to working with clients.
Main types of Titebond adhesives
Today the company's product line includes more than 25 items various adhesives, intended for industrial and home use. This allows customers to choose the option that most accurately meets their production tasks. The most popular types among Russian consumers are:
Titebond II Premium Wood Glue is a moisture-resistant one-component adhesive characterized by extra-strong adhesion, which reduces pressing time. The strength of the resulting adhesive joint in this case is higher than the strength of the wood being glued together.
Titebond II Transparent Premium Wood is a transparent adhesive that provides a reliable bond with short pressing time. Matte texture before use, dries completely transparent, allowing you to achieve aesthetic perfection finished products. Is different high stability to heat and solvents - this is exactly why people buy Titebond 2 glue.
Titebond III Ultimate Wood Glue - for interior and exterior use. Has a moisture resistance class of D4. Produced on non-toxic water based, therefore can be used in the production of wooden products that come into contact with food. By purchasing Titenbond 3 you are choosing an environmentally friendly solution.
Titebond Instant Bond Wood Adhesive - perfect choice where fast drying time is important. Setting time -5 seconds. The transparent liquid perfectly fills all cracks and allows you to do without the use of clamps when gluing.
Where buy Titebond glue By affordable price and with a guarantee of original quality?
Excellent quality Titebond glue - hallmark exclusively original products. Therefore, if you are faced with the task of buying wood glue, Titenbond will be great solution. To place an order, you should contact a trusted supplier for purchase. This type of seller is the Boomans company, which has been selling lumber and related materials for wood processing for more than 20 years. Here you will find:
a wide range of;
prompt execution of the application;
the opportunity to buy in one place not only glue, but also boards, MDF, wood panels or furniture panels.
Call or come to the address: St. Petersburg, st. Syzranskaya, 23, and we will provide attractive conditions purchasing the necessary goods. In us you will find a worthy partner, cooperation with whom will bring benefits to your business, and pleasant emotions and impressions to you personally.