Curtain tiebacks made from beads. Curtain holders. Classic and original ways to decorate a window. Tiebacks for common rooms

Curtains are an integral part of the interior. Proud curtains for the office or light openwork curtains for the kitchen - any of them require tiebacks. They give the look a complete look and help regulate the amount of sunlight we want to let into the room. Is it possible to sew curtain holders with your own hands? The instructions below will help you with this.

Types of curtain tiebacks

When decorating windows with curtains, you can avoid grabbing the fabric and leave it flowing. There is another, more creative option - to use hand-sewn curtain tiebacks. The peculiarity of this accessory is that it can be changed at least every week, creating new combinations with the same curtains. Fastening for the curtain composition is carried out using hooks that are mounted near the window.

Fabric

The easiest option is to sew tiebacks with your own hands using the same fabric from which the curtains are made. In this option, lining materials are used, because they hold their shape better. Sometimes they are sewn between layers metal carcass. Ideal shape in this case the crescent moon is considered. Contrasting tones add originality to plain curtains. They are often decorated with sequins, flowers or in the form of bows, which is suitable for children's rooms.

Magnetic

The next most popular are devices equipped with holders in the form of magnets. They match lighter curtains. Magnets can be open or sewn into the fabric itself. In any case, they are placed at the ends of the garters. The holders themselves can be anything: decorative cables, ribbons, braid or twisted cords. Important detail– decoration of magnets. They are disguised with rhinestones, beads, brooches and other elements.

Hard

Like soft pickups, hard ones have several varieties:

Metal staples that simply hook the curtain up. Do-it-yourself forged clamps are especially valued.
Any solid products suitable shape which are covered with fabric.
Fasteners or clips for curtains. These can be magnets, buckles that are attached to tapes or Velcro.

Cords with tassels

When framing thicker curtains made from fabrics such as velvet, satin, brocade or jacquard, hangers in the form of twisted cords with knots and tassels are used. An alternative to them are regular beads. They allow you to make deep vertical folds from heavy material. Such hangers are necessary to emphasize the richness and at the same time dilute the monotony of rich curtain fabrics.

Hairpins in the form of rings

One of original ideas curtain tiebacks are pins. Their main part looks like a ring. The second one resembles a large hairpin. The peculiarity of such clamps is in the material. They are made of wood, metal or plastic. The “clip” can be classic and not stand out against the general background of the curtains, or, on the contrary, attract attention with the help of an additional accessory.

How to sew curtain tiebacks with your own hands

On the Internet you can find many master classes on making do-it-yourself tiebacks. Each option involves the use of one or another material and technique. Before choosing a specific one, you need to decide at what height the suspension will be located. You also need to take into account the material of the curtains. For a lightweight look, thin ribbons, hairpins, large beads or decorative cords are suitable. Blackout curtains It’s better to decorate with bows, large buttons or artificial flowers. Below are several instructions on how to make a classic or more original pickup.

Classic fabric curtain holders

The classic type is easy to sew. To make it you will need:

textile;
interlining;
ruler;
decorative rings;
scissors;
chalk or soap;
iron.

If you have soft material, then strengthen it with non-woven fabric. For patterned fabric, choose the correct placement of the pattern so that its symmetry is not broken. The sequence of cutting and sewing is as follows:

Curtain holders made from discs using the kanzashi technique

The potholders, decorated in the style of a kazansha made from ribbons, look original. different color. To make them you will need:

satin ribbons 2.5 and 5 cm wide different shades;
2 CDs;
hot glue;
sushi sticks.

The instructions assume the creation of one pick-up. The second one is done according to a similar principle. Manufacturing includes the following steps:

How to make decor from CDs

Using old disks, you can make curtain tiebacks with your own hands, not only from satin ribbons. Other materials used in this master class:

1 old disk;
1 kebab skewer or sushi stick;
jute twine;
hot glue;
thick cardboard.

The manufacturing sequence is as follows:

How to make a flower

Using a flower, you can decorate a classic holder or make an independent holder. The manufacturing technique is as follows:

Decorative curtain clips with magnet

One of simple ways, which can be used to make tiebacks for curtains, involves the use of magnets. They will be required in the amount of 2 pieces. In addition to magnets, you need the following:

material for the connecting strip, such as fabric, chain or cable;
decorations for decorating a magnet.

Making a craft involves a few simple steps:

Video: how to sew original curtain clips

Photo examples of DIY curtain tiebacks

Curtains are an important component of any interior. They not only act as lighting “regulators”, but are also decorative decoration, the design of which largely determines how cozy the room will be. Only one beautiful fabric often not enough to achieve desired effect. That is why they resort to using all kinds of accessories that can transform and enliven a window opening. This includes grips, which you can either buy ready-made or try to make them yourself.

What it is?

Tacks are used not to hang the curtain completely, but to collect each side of it using, for example, a strip of fabric or a rope, and secure it to the wall. As a result, the fabric will receive a beautiful drapery, and the window will remain partially open, and light will flow unhindered into the room. Such elements are attached approximately at the level of the window sill, although there are exceptions. For example, in the case of Italian curtains this occurs somewhat higher.

So that the clamps do not exist on their own, they should be selected in such a way that they are combined with the fabric or echo their motifs with certain interior items.

Make it out of everything

Making such decorative elements is real creativity. Anything can be used. In the photo you can see interesting ideas, which will not be difficult to bring into reality with your own hands. Look at your curtains and think about what would go best with them. You can try to make tacks from strips of fabric left over from the main piece, plaits, ropes, ribbons, chains, belts, etc. So that the part does not seem boring, it can be transformed with the help of flowers, beads, beads, buttons, tassels, embroidery, etc. d. The most important thing is that the end result is something that will really suit and please the eye.

We bring to your attention two master classes on making curtain holders. If you want, repeat it, or do something similar.

Method 1

You will need the following:

cord matching the color of the fabric - approximately 100 cm;
beads, can be colored, different in size;
wire – 2 mm in diameter, approximately 3 meters long.

Work stage:

We take the wire and string the largest bead onto it, fasten it exactly in the middle by rewinding both ends (so that the bead does not roll).
Then we continue to string the remaining beads. This can be done in different sequences, the main thing is that there is an even number of them at each end of the wire.
We string smaller beads onto the ends to maintain the proportion.
Now the finished pendant needs to be connected to the cord. Its central part is untwisted a little or simply separated, then one end of the wire is inserted into the resulting hole. Having retreated about 0.5 cm, the second end is pushed through. Both ends eventually need to be twisted together.
To prevent the ends of the wire from sticking out, they should be carefully trimmed.

If one pendant, in your opinion, is not enough, make several, and attach them to the harness using the method described above. Here is such a master class. Ready product All that remains is to hang the curtains in the right place and fasten them to the wall, where a nail or a special hook should be carefully driven in. The photo shows what it looks like.

Method 2

Very interesting curtain holders can be made from old CDs. The final product, such as in the photo, will be very similar to a hairpin. So, you will need the following:

old disk;
wide ribbons of the color you need;
fabric flowers or anything else for decoration (rhinestones, beads, etc.);
scissors, thread, needle;
glue.

Progress

You need to cut the core out of the disk so that it turns into a hoop, the width of which is 3 cm. You can use a compass to mark a circle in the center.
Lubricate small area hoop with glue and apply one end of the tape. We are waiting for it to dry well. Next, we begin to wrap the tape around the entire hoop so that there are no visible areas left anywhere, and the overall surface is neat.
Now you need to start decorating the ribbon. Can be glued beautiful flowers made from fabric or ordinary artificial ones. You can stick a large number of bright rhinestones. In a word, anything, the main thing is that it turns out beautifully.

That's all, all that remains is to choose something long that will act as a clasp for our decorative hairpin. For example, sushi chopsticks may be quite suitable for these purposes. Please note that thanks to this master class you can make a curtain hanger that does not require mounting hooks on the wall.

As you can see, there is nothing difficult in doing something similar with your own hands. The most important thing is to think over a design that should not be boring, sloppy or incompatible with the fabric. Also watch the video to make it easier to understand what the essence of making curtain holders is.

Curtain tiebacks are an interior detail that can make it more original; a fairly small thing can make it simply unique and inimitable. With the help of various tiebacks, you can revive and update even not new curtains that have served for many years. By adding such an accessory, the curtains will sparkle with new colors and will not seem so boring.

You don’t have to go to the store and spend your family budget on such an addition; you can easily make them your own with my own hands from all the “junk” in the house.

What are grabs for?

The direct purpose of the tiebacks is to regulate the length of the curtain. It is quite convenient to adjust it in this way to the required size. With their help, you can choose a beautiful curtain without compromising the appearance.

The curtains do not have to be opened all the way; tiebacks will help them remain half open to regulate the lighting to the required level. They create a shape and a unique look for the curtain.

As an interior detail, the scoop creates the necessary atmosphere in the room, complementing the overall design.

How to make a clamp yourself?

Making curtain tiebacks with your own hands is not at all difficult and will not pull extra costs from family budget. You don’t need any special skills here, you just need to have the desire, the recommendations from the article will help you make this element without difficulty. Ribbons, ropes, beads, even old CDs, toys, cutlery will be used to help make a stylish grab.

Finding a photo of a curtain tieback will not be difficult; the Internet is replete with photographs of handmade crafts by folk craftsmen, allowing you to see the real appearance of a homemade tieback.

Initially, you need to decide on the design of the room; the furnishings of the room also matter when choosing materials for the manufacture of such a decorative element.

Using the tips from the article, you can easily and happily decorate curtains on a window or doorway.

Tiebacks for kitchen curtains

The kitchen is a special place in the house and requires special comfort. Curtains on kitchen windows, part of the design, giving it the necessary comfort and warmth. The tiebacks for them can be made from textiles. You need to take approximately 1.5 meters of fabric. To begin, make loops, take 20 cm wide and 15 cm long fabric for them. Determine the center of the fabric, fold both edges towards the center and fold the fabric, both edges will be inside.

Now machine or hand sew along the edge. So you need to make 2 loops depending required quantity pick-ups. Using the same principle, make the pickup yourself. Cut 0.5 meters of fabric in length and 40 cm in width, fold and sew using the same method.

Now bend the edges inward, fold the loop in half, insert one loop into one end, the second into the other, stitch the edges. Sew large buttons or flowers onto the fabric, or felt fruits or vegetables.

This accessory is attached to special hooks for grabs; they must be screwed into the wall. The hook is a special thread made by the manufacturer. You can buy such accessories in a specialized store. The color range of such accessories is varied. You can easily choose the appropriate style for the pickup.

Tiebacks for children's

The children's room is a place where children spend a lot of time.

You can style the curtains in it using the ones that your child is tired of soft toys small size. This can be done by attaching a small bear, bunny or other toy to a textile tie in the center.

The toy should seem to hug the curtain. You can take a thick rope and hang many different small toys on it, like pendants on bracelets; loops can be made by simply making them on the rope.

Bedroom tiebacks

In the case of a light design using light fabrics for curtains, magnetic curtain tiebacks are ideal; the base can be purchased at any specialized store. Fabric flowers will decorate magnets perfectly; you can make a similar decor from ribbons, which you will probably find at home; they are simply folded together and the folds are attached with a thread and a needle.

Magnets can be attached to them using special glue; if it is not available, regular silicone glue is used. Ordinary beads attached to magnets will look great.

Tiebacks for common rooms

This is where there is room for wide imagination. The design of such rooms is always varied and made in different styles, accordingly, you can use a wide variety of grabs, from lush brushes to metal elements.

Holders for tiebacks are simply ideal for any style and design; in such rooms they look most advantageous. Wide choose A detail like this is sure to satisfy any taste. You can do the grabs yourself.

Alternatively, you can use an old CD; you need to cut out the center, leaving about 2 cm from the edge. Next, wrap the circle with ribbon, twine, rope, of your choice. You need to attach decor, for example, buttons or beads, to the top of the winding using glue, it all depends on the interior.

Now you need to make the second part, it could be an old knitting needle or even just a straight stick, it needs to be wrapped with the same material as the circle itself, there should be a loop on one edge. It is attached to the curtain in the following way: the curtain must be stretched through the fabric and a knitting needle must be placed behind it, and the loop hooked onto the holder.

Whatever style of pickup you choose, it is worth remembering that it is just a detail and should not distract attention from the interior, but only complement it.

Photos of curtain tiebacks

Anyone who has ever thought through the interior of their home has noticed how important the role played by accessories that combine utility and attractiveness. Curtain tiebacks are just such an attribute of the decor: using curtains with them will become more convenient, and the room will receive another bright touch. They can be made in the form of solid holders or soft fabric products included with finished curtains. However, a more interesting option would be not to buy factory products, but to make them yourself. This way you can match them to the design of a specific room and emphasize your taste and personality.

Types of grabs and materials used

These accessories perform several functions:

first of all, they hold the curtains so that sunlight penetrates into the room;
decorative: when composing an ensemble with curtains and lambrequins, they improve general form rooms;
can visually change the shape of the window opening: when they are located in the upper third of the curtain, the window appears higher, and in the lower third it appears wider;
with their help it also becomes possible to partially hide the old ugly window sill.

Pickups are performed in different versions.

The holders must match the curtains themselves. The same (or contrasting color) fabric is used, the same decorative elements: fringe, tassels, cords, etc. The general style must also match.

The type of this accessory depends on the style and materials of the curtains and the design of the room:

fabric tiebacks will match classic curtains;
magnetic pickups will be good choice for light curtains, for example, tulle, lace, sewn from organza, and the material for them themselves can be lace, braid, cords, ribbons, beads and beads, etc.;
plain tiebacks are suitable for curtains with a pattern, and they can be additionally decorated with flowers, beads, embroidery, kanzashi-style decorations, etc.;
rigid tiebacks, as a rule, are made in the form of a buckle or ring and are more suitable for thicker curtains modern styles.

With DIY tiebacks, even ready-made curtains will take on a more individual and stylish look. It is important to choose the right size so that the grip is neither too tight nor too loose. Then the fabric will drape beautifully.

You may also be interested in material about manufacturing roller blinds: .

How to make a curtain tieback with your own hands - step-by-step instructions with photos

Quite a collection here interesting options pick-ups. Some are more difficult to make, while others don’t even require sewing skills.

Magnetic products

Magnetic holders are convenient because they do not require additional hooks on the wall - curtains can be grabbed anywhere with them. Such curtain accessories are made of fabric, with cord, braid and other decorative elements.

The following components are used in production:

fabric, cord or cable, beads - for the main part, which can be different;
magnets - 2 for each pickup;
hot glue and glue gun;
bows, ribbons, buttons, various metal decorative elements, shells or small flat stones in the case of a room in nautical style- to decorate the product.

Magnets are sold in craft stores. The required size depends on the severity of the future lift and the thickness of the curtains. The heavier the hold and the thicker the curtain, the more powerful (and therefore larger) the magnet should be.

Laconic, convenient and simple - these features of this type of accessory are very attractive

Step-by-step master class:

Take a strong braid or cord of suitable length. If there is any fabric left over after sewing curtains, you can sew strips from it.
A magnet is attached to each end with hot glue (from the wrong side). You must first make sure that the magnets on the same arm will attract each other and not repel each other.
On the front side, if desired, the holders are additionally decorated. Beads, ribbons, braid are sewn on, embroidery is done. Small decorative elements are attached to the magnets.

If it fits into the decoration of the room, you can stick on rhinestones and sequins. Sometimes holders with high-quality artificial flowers look good.

There are also more complex decoration options.

Video: magnetic pick-up with a rose

From beads

This is quite simple to implement, but stylish and effective option. The production here uses both beads, matched to the color and texture of the curtains, and just old unnecessary decorations.

To work you will need:

soft, durable cord (better than rope weave);
fishing line;
wire;
beads, seed beads, glass beads, etc.;
scissors.

Materials must be selected so that the grabs are the same. You can use glass, wood, plastic, metal and other decorations. Depending on this, the pickups are obtained in different styles.

The combination of decorative cord and color-matched beads looks quite impressive.

Step by step process:

About 50 cm of wire or fishing line is cut. It is folded in half and a central bead is placed on it. The wire is twisted into several turns. The same bead is strung on both ends. This is repeated several times. Then the ends of the wire are fastened by twisting.
They are threaded through the cord and secured. It turns out to be a pendant. You need to make several of these, placing them at a short distance from each other. The same is repeated for the second curtain.
In addition to tassels, the cord is decorated with braid. To do this, a long fishing line is wrapped several times at the base of the cord and secured. Then beads and/or glass beads are strung on it, close to the tone of the cord or in contrasting colors.
The fishing line is wrapped around the cord, secured with threads suitable color. Then its end is attached in the same way as the beginning.

This decoration looks good with or without beaded tassels.

There is also a simpler option. A good curtain holder is made from old long beads. One end of it is placed on a special hook. The beads must be strung on a strong fishing line, since a regular thread will not support the weight of the curtain. You can also additionally decorate such a holder with antique keys, pendants, etc.

Thus, unnecessary jewelry turns into a useful accessory.

From cord (macrame)

Macrame is a type of knotted weaving. Using this technique, decorative napkins are often made, but tiebacks made in this style also look original and elegant.

Such grabs are woven from thick ropes.

You will need:

jute, clothesline or thin rope, both natural tones and dyed - a total of 24 pieces of cord about 2.5 meters long, maybe two or three colors that are in harmony with each other and with the curtains;
pincushion;
button to secure the pattern.

This type of product requires the least amount of materials

Step by step execution:

Curtain holders are woven with flat knots. The cords are folded together and bent in half to find the middle of the segments. It is attached to the pad with pins. 5 flat knots are made from a third of the threads in any direction (left or right). Then the pad is turned and the same number of knots are made, but in the opposite direction (that is, right or left).
The knots are folded to form a loop. If weaving is made from threads different colors, the cords of the color used are hidden in the middle of the bundle, and two knots are made with pieces of a different color for fixation. 8 cords are used for this.
All cords are divided into three parts. Flat knots are woven from each part. For the extreme ones you need 7–8 knots, and for the middle ones – 5–6 knots. They are then connected together and secured again with two knots. It turns out to be a link in the chain.
Weaving continues until the desired length. At the end it is fixed in the same way, with two flat knots. You can leave the ends of the cord, you will get a beautiful brush. A button is sewn on. Its size should match the diameter of the first loop.

It is not necessary to strictly follow the instructions. You can take more or less threads, then the pick-up will become thicker or narrower. When the number of nodes in the links changes, their size changes. The main thing is that the overall appearance of the product is in harmony with the curtain.

This option will give the room an ethnic character.

Video: interesting nautical-style rope grab

Pay attention to master classes on making Roman blinds:.

From disk (hard)

An original pickup can be made from an unnecessary CD. IN classic interior It won’t fit in, but it will fit perfectly with a more modern one.

There are also few constituent elements here:

several old CDs - it is better to take them with a reserve in case you cannot immediately cut the core correctly;
twine, ribbon, braid or leather cord for decoration;
knife or scissors;
glue gun

Step by step steps:

First you need to cut from the disk inner part. To do this, a circle is drawn on it. It is convenient to mark it by attaching a mug, vase, etc. The inner circle is cut out. To make this easier, you need to heat the knife.
Then the resulting ring is tightly wrapped with twine or ribbon. The beginning and end are secured with hot glue. Then the product is decorated. You can stick on bows, buttons, beads, string folded into patterns, etc.

The work is painstaking, but the result already at this stage looks elegant

The curtain is held on with a stick. It is decorated with the same materials: it is wrapped and pasted in exactly the same way.

Decorating with butterflies looks very cute here

Sometimes the lift is made without a stick, then the curtain is simply threaded through it.

This option is reminiscent of disco style

From fabric

This option is suitable for curtains in classic style. Fabric tiebacks make different forms. Such crescent-shaped tiebacks drape curtains beautifully. The material gathers in beautiful folds and does not deform.

To work you will need:

thick paper (for patterns);
piece of fabric;
threads matching the color;
adhesive sealant (for example, non-woven fabric);
braid for ties (to match the main material or in harmony with it);
pencil, chalk or special fabric marker;
scissors;
iron;
sewing machine or needle.

Very little paper is required here.

The length of the cut should be slightly larger than the width of the curtains. It can be quite narrow in width, from 20 cm (for two products - from 40 cm). The tieback is often made from the same fabric as the curtains themselves. This accessory, made in a contrasting color, also looks interesting. The back parts can be any color.

The grab, as a rule, is attached to a special holder driven into the wall at the required height. There are such clamps various sizes, shapes and colors.

Step-by-step master class:

Kanzashi technique

Using this technique, decorative elements such as flowers, leaves, individual petals and more are made from silk ribbons. Initially they were used to decorate women's hairstyles and outfits, and then moved into the interior.

To pick up in the kanzashi style you will need:

satin ribbons;
pieces of tulle or organza;
scissors;
threads;
glue;
beads (optional);
thin wire (also optional).

Step by step execution:

First you need to make the base. Then it is decorated with flowers or other elements using the kanzashi technique. The base itself can be anything. The following master classes are suitable for its production:
- on a magnetic holder;
- tissue;
- or hard.
To make flowers, ribbons and fabric are cut into squares. The diagonal of such a square is slightly larger than the length of the petal. For example, the dimensions can be 3x3, 5x5 cm, etc.
The edges of the resulting squares are carefully processed with a lighter or wood burning tool. This way they won't crumble. Then these squares are folded according to the pattern and fastened with thread.
Flowers are made from the finished petals, also held together with thread. You can glue a bead or rhinestone into their middle, or make “stamens” from wire.

Snowflakes, butterflies and other figures made using this technique look interesting. They are attached to the scaffold with hot glue.

Thus, gradually the squares of fabric turn into petals

The result of this long work looks much better better use any artificial flowers

Fairy tacks

Such decorations are well suited for a girl’s room. Colors are selected taking into account the entire interior.

You will need to prepare the following materials:

pattern paper;
thin fabric (flesh or white, cotton is better);
satin, tulle or organza in bright or pastel colors(for dress);
satin ribbons and lace;
filler (sintepon, padding polyester, cotton wool, etc.);
threads to match the color of the fabrics;
floss threads for face embroidery;
beads, buttons, etc.;
magnets for fastenings;
The tools you will need are needles and scissors.

It makes sense to choose flesh-colored fabric for this pattern

Step by step execution:

The pattern is transferred to the fabric. For one fairy you will need 4 parts for legs and arms and 2 each for head and torso. They need to be cut a little bigger size(by 2–3 mm) to create seam allowances.
The parts need to be sewn together with small, neat stitches, leaving small holes. Then the parts are turned inside out and stuffed tightly. For convenience, the filler can be pushed into the arms and legs with Chinese chopsticks. After stuffing, the hole is sewn up with a hidden seam (except for the neck). To prevent the filler from coming out, it is better to use a “needle back” stitch. Then the parts are sewn together. Legs and arms should be symmetrical. It is advisable to turn your head to the side. Then the fairy will look into the room and not hide her face in the curtain.
On the finished face, eyes (can be closed) and lips are embroidered. Hair is made from threads. They are pulled through the head fabric and then cut to the desired length.
The dress is made from ribbon and small pieces of fabric. For example, you can take two trapezoidal shapes. They are cut in a semicircle at the top, and wavy at the bottom or remain straight. The pieces are applied to the toy and sewn together. Ribbon ties are attached at the top. The feet are either left bare or wrapped in tape to look like pointe shoes. You can make and sew wings.
To attach it to the hands, magnets are glued or ribbons are tied. Depending on the width of the curtain and the density of the fabric, you will need one or two fairies for each. In the latter case, the couple's hands are carefully sewn together.

With the dress, hairstyle and wings she looks truly magical

You can independently make not only unusual curtain tiebacks, but also lambrequins. In our next material you will find out what types there are, how they are combined, and you will also find patterns and step-by-step master classes: .

Ideas for inspiration

There are many more options for making curtain tiebacks than one article can cover. For this purpose, the most unexpected materials and various technologies are used, allowing you to make exclusive accessories with your own hands, which not only add convenience to everyday life, but also please the eye.

This option looks good on folk style curtains

Wrapping this accessory with thread in the color of the curtain connects them into a single composition

This decor looks good on thick fabric curtains

The contrast of thin fabric and natural dense thread looks impressive

This version of the product will fit perfectly into the interior of the kitchen.

Metal, stones and key - a beautiful combination

Looks simple and cute on thick fabric

Sometimes curtains are held up by unusual objects such as ties or belts. The straps can be shortened if necessary and attached to the wall. Or they simply pull the curtain together, like ties.

This option is at least very original

The pattern here must either be absolutely identical, or be on one of the elements - a combination of the two different textures undesirable

In children's rooms, you can decorate the curtains not only with fairies, but also with other toys.

The gentle colors and themes of bear cubs and honey look very positive

One such large and bright initial will convey to the child a warm attitude from the parents

This way the child will unconsciously learn to respect nature.

Tiebacks in marine or eco-style look interesting.

Curtains are an important part of any interior. They complement the design of the room, giving it consistency and completeness. To fabric curtains were not only aesthetically pleasing, but also practical, it is necessary to select accessories such as curtain holders for them. Today we will tell you how to make hard and soft curtain holders with your own hands.

Curtain ties can be completely invisible in interiors, or, on the contrary, they can add originality to the room. It all depends on what materials you use to create such accessories.

Usually, the hook is paired with a hook, which is mounted on the wall and holds the tied fabric in one position, however, there are options that do not need such elements.

Depending on the material from which they are made, curtain hooks are divided into several subtypes. If you decide to choose ties that require such additions, we recommend that you familiarize yourself with the list of the most popular materials for hooks.

Types of curtain hooks:

Plastic curtain hooks are one of the most inexpensive, and therefore popular, options. Such products may have the most different design, thanks to which they fit perfectly into any interior.
Metal hooks fit perfectly into modern interiors. They are very strong and durable.
Wooden hooks are environmentally friendly and beautiful. There are carved options that are simply incredibly beautiful.

Curtain hooks are usually located at the level of the window sill, but can be mounted slightly higher. Such products are not always noticeable; very often they are hidden behind fabric.

The clamps themselves can be made from the most different materials. Fabric, ribbons, strings of pearls, and even metal will suit you. You can make clips using only your imagination, or take advantage of one of our master classes.

Learn how to make a rigid curtain clamp with your own hands: master class

Rigid curtain holders are more suitable for modern interior styles. They look quite laconic and minimalistic.

To create rigid clamps, you can use the most unusual materials. For example, a holder in the form of a coffee cup without a bottom will look original.

For our version of tacks, you will need two tablespoons, a glue gun, a screwdriver, a drill, and self-tapping screws. Also, if you wish, you can complement the product with flat beads, rhinestones and any other decorative elements.

Master class on making spoon scoops:

Take a tablespoon and carefully bend its handle. The curved handle should be parallel to its round part. The distance from the round part to the handle should be 1-1.5 cm.
Drill two holes in the round part of the spoon.
On the handle using glue gun stick on decorative elements. These can be rhinestones, beads or just fabric bows.
Screw the spoon along the pre-drilled holes to the wall at the level of the window sill using a screwdriver. In this case, the convex part of the spoon should be pressed against the wall, and the end of the handle should look into reverse side from the window.

This design is convenient because it does not require additional hooks. To use it for its intended purpose, simply place the curtain in the space between the round part of the spoon and its handle.

Simple DIY pick-up

In order to make a convenient and beautiful pick-up, it is not necessary to have the skills to work with a drill and screwdriver, or the ability to sew. Bead pendants are suitable for decorating such designs. Pieces of fur or rhinestones.

To make a pick-up according to our master class, you will need a piece of felt or leather, a Chinese stick, paint in the color of the base material, acrylic lacquer, pencil, paper and scissors. Also, if you wish, you can use rhinestones, beautiful buttons or bead pendants.

How to make a simple curtain tieback with your own hands:

Print or draw an openwork design. Your design should be shaped so that it looks neat on the curtain. It is also very important that you can insert a Chinese stick into the openwork holes, which will hold the curtain.
Cut out the design and transfer it to felt or a piece of leather.
Using the marked lines, cut out the base of your tie-back. You can sew rhinestones, buttons or other decorative elements onto the blank.
Paint the Chinese stick, let it dry and apply several layers of acrylic varnish.

These types of grabs also do not require a hook. To use this design, you need to attach an openwork element to the front of the assembled curtain, insert a stick into the openwork hole, pass it behind the curtain, and pull the stick out through another hole.

How to make your own curtain tiebacks from ribbons

Ribbon tiebacks look very nice. However, such elements are quite difficult to make. Here you need to use patience and the skill of forming beautiful flowers from a ribbon.

If you don't want to spend a lot of time fiddling with the tape when creating beautiful products, you can purchase artificial flowers. By cutting off the stem and placing them on tape, you can quickly and easily create a stunning holder.

To create such a product, use a wide ribbon or satin fabric for the petals, satin ribbon for the center of the flower, satin ribbon or fabric for the leaves. You will also need the base of the holder itself; it can be made by putting together two boat-shaped elements made from ribbons and trimming them around the edges with ribbon braid; on both sides of this structure you need to make ties from a thin ribbon.

To make a flower you need to cut out five circles of the same diameter, fold them in half, and then in half again. The rounded part of the resulting triangle needs to be basted and pulled together so that your workpiece takes the shape of a petal with folds. You need to do this with all the circles. Next, the circles are sewn together in a circle, and a circle or ball of fabric of a different color is inserted into the middle. In total, for one holder you need to make two such flowers.

To make petals, you need to cut circles of larger diameter from green fabric. Next, they need to be folded, basted and pulled together according to the same principle as the petals.

To put the tie together, you need to glue or sew leaves onto the base, and attach flowers to them. In this case, the flowers should cover the sloppy edges of the leaves. For this pot holder you will need a hook.

Stylish DIY curtain tiebacks (video)

Clamps are needed to beautifully fix curtains in open position. You can buy them in a specialized store or make them yourself from scrap materials. Use your imagination, use the craziest ideas, and you will get a bright and unique product!