It is very important to foster respect and culture in our children. I consider it very correct to widely celebrate the All-Russian Cosmonautics Day, which takes place on April 12. It is inextricably linked with the name of the first earthling who flew out of the Earth's orbit, Yuri Gagarin.
And it is even more important that this is our compatriot. For our children, this is authority, courage and courage. Therefore, in all kindergartens and schools on this day, a handicraft competition is held on this topic.
The first thing that comes to mind is a rocket and an astronaut. However, I found for you a lot of original ideas on the topic of Space, let's get down to their implementation.
You need to start the most simple options, so let's look at what can be made with our preschoolers. With them we will use the most simple materials: paper, cardboard and plasticine.
For this rocket, you need to make blanks, because the children of four are not yet very good at using scissors, so they need help to cut out the parts.
My daughter just loves to glue rockets. We have already dedicated an entire album to them. Self-adhesive paper was specially bought for this purpose. It is very bright and easy to stick.
I caught the eye of the idea of a Martian from a ball. It certainly couldn't be easier!
Also, the alien can be made of cardboard, and decorate the plate with sequins, which adhere well to PVA glue.
To help, I suggest taking ready template rockets and stretch plasticine on it with your fingers. To be able to use this picture many times, laminate it or glue it on both sides with wide tape.
Also use the ready-made forms of planets for application, at the same time and expand the horizons of the child, explaining to him that there are several planets, and we live on the one that is blue and is called the Earth.
I quote two step by step wizard class, how to evenly cut in blanks from colored paper.
And another template for cutting. All figures have a long tongue with the former base. This base needs to be glued. Then you will have a volumetric applique with a 3D effect.
Another idea made on a piece of cardboard wrapped in a garbage bag. How to do these I gave detailed master Class.
More templates for cutting.
This flying machine can be assembled from cardboard.
Toilet rolls can be used to glue cool simple rockets.
Or use shiny paper for decoration.
Now I will show you how to make such a rocket step by step.
You can combine a craft and a postcard. And make the tail of the rocket out of threads of red, orange and yellow flowers that resemble a flame.
Look at these templates, it immediately comes to mind that there are still lunar rovers, satellites and the planet Moon itself, how many options for creativity at once. Or you can simply cut out these figures and stick them on blue or black cardboard.
Also, just give your child a coloring book on Space and keep it as a souvenir.
Any of these coloring pages can be used as a template to make crafts from plasticine, stained glass paints or cereals! you just need to fill the space between the lines with the selected material.
For example, my child and I love to stretch plasticine with our fingers. And for this, a coloring book with large pictures was specially bought.
By the way, buy soft plasticine for these purposes!
Crafts for April 12 for schoolchildren
For schoolchildren, the requirements are more complicated. But on the other hand, it is much easier for them than for babies, because the number of materials that they can use increases.
For example, make gingerbread cookies on the theme of Space in the form of a comet, planets, flying saucer. You can replace gingerbread salt dough... And also after baking, paint it with colored glaze. How to cook it is well described by my colleague https://azbyka-vkysa.ru/vozdushnyj-pasxalnyj-kulich.html
Or use cotton pads. They can be colored and passed off as the planets of the solar system.
Also a very painstaking work for those who like to embroider with beads. It can be replaced with bugles, sequins, or even use the cross-stitch technique.
Here's an example of how to replace beads with buttons.
First graders can be asked to make a rocket from a cardboard roll.
Or this option with a passenger)))
How to correctly make a rocket that has a base is shown in the instructions. Everything is very detailed and the child himself will be able to repeat all the stages.
You can cut the stand according to this scheme.
How do you like the idea of a voluminous craft? When the whole Cosmodrome is looking at you, maybe Baikonur itself?
You can make a craft on a stick. We need skewers for a kebab. Use crepe paper or napkins for the tail.
A cocktail tube works great too.
Use two pieces to hide where the tube is attached.
You can create a whole composition of crafts using this technique. By the way, you can put them in a glass with semolina, sugar or salt. Grains and spices will prevent the sticks from moving and bending.
Glue the planet out of papier-mâché.
Older children also work with plasticine. But they are already using complex techniques for working with flagella and shapes.
Another cool plasticine work. Look, the whole sky is made of these same flagella.
And here is our favorite technique of stretching plasticine with our daughter. It is suitable for children of all ages.
Teachers will also like cardboard hangers with passengers inside and string tails.
If you like to use unusual materials, then I advise you to take pasta. What is not done with them! Even the balls are pasted over, as we did with threads and PVA glue. Or they create beautiful design for work.
Felt is also suitable for creativity. It is easily glued transparent super glue... Products are made from it according to the same patterns as paper appliques, so this fabric keeps its shape perfectly and has a convenient thickness for work.
In fabric stores, you will be offered many shades and different sheet thicknesses of this material. There is a lot to choose from.
But according to these patterns, you can assemble an astronaut, a plate and a rocket.
They need to be transferred to paper and then to felt.
Make a fabric applique from it.
This template will do.
Or such a not so simple, but super-duper photo frame with the image of children.
By the way, about the photo! There are still very original ideas with them. For example, to portray a child as an astronaut.
Or use this angle. You can also stick photos of friends or classmates on each planet.
A paper helmet will help you feel like an astronaut.
It can be made thicker and more realistic by using the papier-mâché technique.
To do this, you inflate a balloon, a newspaper is applied to it, abundantly moistened with paste. Many layers are done this way. Then, after drying, the ball bursts and gently peels off the structure. The final layer always comes from white paper so that you can beautifully decorate the craft.
From sponges and polyurethane foam you can cut out such balls and assemble them into a smaller copy of the solar system.
I consider this wreath with stars, planets and an astronaut to be an original idea. Shapes can be cut from the above coloring pages.
For home use, make a jet engine with your son from plastic crafts.
An even more serious version of the space composition, which can be made from salt dough, plasticine and even clay.
Plastic ball and disc Saturn will conquer any teacher!
These balls are sold in florist shops. We made a similar one from polyurethane foam. We poured it into the model, dried it and cut out the shape we needed with a clerical knife.
The joint will be fixed with a toothpick.
The volumetric applique will also appeal to everyone.
All its highlight is in the paper spiral that holds the plane or rocket.
Quite a tricky idea made of paper scraps. It is important to observe here color range and the shape of all objects. It can take quite a long time, but it looks very grown-up.
More options for simple rockets in different colors.
And now I'll show you how to conquer all classmates and teachers! You need to do something big, like a growth rocket!
V assembly hall it can be used as decoration and decor, as well as as a photo zone.
Or you can leave at home, let your son rejoice.
Here is a variant of the exhibition samples.
It's not a shame to nominate such a rocket for the competition, but we'll talk about this later.
A step-by-step origami rocket masterclass?
Origami allows you to create independent paper objects without the use of scissors and glue. Often one A4 sheet is enough for them. And there are a lot of missile options, there are those that stand on their tails, and there are those that are used for volumetric applications.
The simplest version of the rocket is made in three minutes.
After you find the middle of the sheet along the length, you need to roll both upper corners to it.
Then we shape the body.
And side elements. Turning the edge outward.
We repeat the same for the second side.
I will also give step by step diagram, which is backed up by the upper master class.
The origami base can be supplemented with paper tubes.
There is a modular origami technique, when a picture or figure is assembled from many small parts of the same size. Here's an example of this technique.
Of course, you won't be able to do it quickly, but hand skills will develop.
And, of course, you need to see how a complex craft is done.
Be patient and repeat all the steps shown with your child. Perhaps he is your future engineer, or designer!
Making a rocket out of plastic bottles and waste material
They are gaining more and more popularity. They are used by summer residents to decorate their site and from them they make homework to school.
For example, using different volumes, you can make such an instance.
Or you have disposable tableware left at home, then it can be used almost as intended. Replace the plastic saucer with a flying one for an alien.
Or convert a bottle from a rinse aid into a flying machine, and even with a photo of an astronaut.
From ice cream sticks plastic container and boxes from processed cheese you can make a cool plate too.
And make radars out of wire.
Another idea from disposable tableware.
And when you have a whole bottle of Fanta and some cardboard, put together a very realistic model.
Aliens can be made from wire and kinder eggs.
Old discs come in handy too.
This option deserves all the praise. People did their best and captured the name of the Mir rocket and lifted our country.
I think you were inspired by these simple crafts, so let's take a look at how to make them step by step.
You need to cut off the bottom of the bottle, and cut out the porthole.
A cone can be made using this technique, when one cut is made at the circle to the middle and the edge is superimposed on the adjacent side.
We paint all the cardboard parts and the bottle body itself.
For gluing, it is better to use hot glue, so all the details will be better captured.
Ideas for the competition by April 12
Of course, in everyone educational institution all kinds of contests are arranged and children are obliged to participate in them. But not all works are then taken to the exhibition. Let's take a look at the options that deserve close attention.
For lower grades, choose a cardboard rocket.
For older adults, offer to make a whole composition with elements of the Cosmos.
It is done based on cardboard box, which from the inside is painted blue or black. And all the prepared elements are attracted to its top on the fishing line.
I specially selected a lot of photographs made in one idea to make it clearer for you.
You can hang any content in the style of Space: planets, stars, comets, rockets, astronauts, etc.
And also really liked voluminous idea parade of planets.
It is glued together in layers, in which a smaller circle is cut.
This is what the blank looks like.
A sheet with a cut out circle itself large diameter, is placed first, the rest are in order of decreasing diameter.
I would also take a plasticine idea to the exhibition, which is very neatly executed and rather laborious.
An option for how you can make craters on the surface of the moon.
Well, remember about the growth rocket, which can also be submitted to the competition. after all, at such events, they are very fond of large crafts.
I'm finishing up for today. If you have any more ideas, please describe them in the comments below the article.
The water rocket is an excellent homemade product for a fun pastime. The advantage of its creation is the absence of the need for the use of fuel. The main energy resource here is compressed air, which is pumped into a plastic bottle using a conventional pump, as well as liquid that is released from the container under pressure. Let's find out how a water rocket can be constructed from plastic bottle with a parachute.
Operating principle
Do-it-yourself water rocket from a plastic bottle for children is quite simple to assemble. All that is required is a suitable container filled with liquid, automobile or as well as a stable launch pad where the craft will be fixed. After installing the rocket, the pump builds up the pressure in the bottle. The latter soars into the air, splashing water. The entire "charge" is consumed in the first seconds after takeoff. Further, the water rocket continues to move along
Tools and materials
A water rocket from a plastic bottle requires the following materials:
- the container itself is made of plastic;
- plug valve;
- stabilizers;
- parachute;
- launch pad.
In the course of work on the design of a water rocket, scissors, glue or tape, a hacksaw, a screwdriver, and all kinds of fasteners may be required.
Bottle
The plastic container for creating a rocket should not be too short or too long. Otherwise ready product may be unbalanced. As a result, the water rocket will fly unevenly, topple over on its side, or will not be able to take off at all. As practice shows, the optimal ratio of diameter to length is 1 to 7. For initial experiments, a 1.5 liter bottle is quite suitable.
Cork
To create a water rocket nozzle, it is enough to use a valve plug. You can cut it off from a bottle of any drink. It is imperative that the valve does not allow air to pass through. Therefore, it is better to extract it from new bottle... It is recommended to check its tightness in advance by closing the container and squeezing it tightly with your hands. The valve plug can be attached to the neck of a plastic bottle with glue, sealing the joints with tape.
Launch pad
What does it take to take off a water rocket from a plastic bottle? The launch pad plays a decisive role here. To make it, it is enough to use chipboard sheet... The neck of the bottle can be fixed with metal brackets installed on a wooden plane.
Parachute
So that the water rocket can be used several times, in order to good landing it is worth providing for a self-expanding parachute in the design. You can sew its dome from a small piece. thick fabric... A strong thread will serve as slings.
The folded parachute folds up neatly and fits into tin can... When the rocket takes off into the air, the container lid remains closed. After launching a homemade rocket, a mechanical device is triggered, which opens the can door, and the parachute opens under the influence of the air flow.
To implement the above plan, it is enough to use a small gearbox that can be removed from the old or wall clock... In fact, any battery-powered electric motor will do. After the rocket takes off, the shafts of the mechanism begin to rotate, winding a thread connected to the lid of the parachute container. As soon as the latter is released, the canopy will fly out, open and the rocket will smoothly descend.
Stabilizers
In order for the water rocket to soar evenly into the air, it is necessary to fix it on the launch pad. The simplest solution is to make stabilizers from another plastic bottle. The work is performed in the following sequence:
- To begin with, take a plastic bottle with a volume of at least 2 liters. The cylindrical part of the container should be flat, not contain corrugations and textured inscriptions, since their presence can adversely affect the aerodynamics of the product during launch.
- The bottom and neck of the bottle are cut off. The resulting cylinder is divided into three strips of identical size. Each of them folds in half in the shape of a triangle. Actually, the folded strips cut from the cylindrical part of the bottle will act as stabilizers.
- At the final stage, strips are cut from the folded edges of the stabilizers at a distance of about 1-2 cm. The formed protruding petals in the central part of the stabilizer are turned in opposite directions.
- At the base of the future rocket, appropriate slots are made, where the stabilizer petals will be inserted.
Triangle-shaped pieces of plywood can serve as an alternative to plastic stabilizers. In addition, the rocket can do without them. However, in this case, you will have to provide solutions that will fix the product on the launch pad in a vertical position.
Nasal part
Since the rocket will be installed with the cork down, it is necessary to put a streamlined nose on the bottom of the inverted bottle. For this purpose, you can cut off the top from another similar bottle. The latter must be put on the bottom of an inverted product. You can fix such a nose with tape.
Launch
After the above steps, the water rocket is, in fact, ready. It is only necessary to fill the container with water by about a third. Next, you should install the rocket on the launch pad and pump air into it using a pump, pressing the nozzle against the plug with your hands.
In a bottle with a capacity of 1.5 liters, a pressure of about 3-6 atmospheres should be injected. It is more convenient to reach the indicator using car pump with compressor. In conclusion, it is enough to release the valve plug, and the rocket will take off into the air under the action of a stream of water gushing from it.
Finally
As seen, do water rocket from a plastic bottle is not that difficult. Everything that is required to make it can be found in the house. The only thing that can cause difficulties is manufacturing mechanical system opening the parachute. Therefore, in order to facilitate the task, its canopy can simply be put on the nose of the rocket.
Salute everyone!
How are you, dear readers and guests of my blog? Have time to take a break from? I think it's not stressful to tinker with something and do it together with the kids. And now there is still one holiday ahead - the Day of Cosmonautics. And it falls on April 12. On the day when our Soviet cosmonaut Yuri Gagarin flew into space for the first time.
Usually this is a boyish theme - space. They really love to invent aircrafts, plates and rockets. But some girls are not lagging behind either. Still would! It's very exciting, but from a junk yes natural material you can do such works that they will win any competition.
Let's take a look at a selection of interesting ideas. Most likely, they will give you interesting thoughts and create your masterpieces. After all, fantasy here is where to roam. The work can include planets, satellites, flying vehicles, UFOs, rockets and much more.
Note that I also draw ideas from the Internet, from its publicly available sources. Basically, these are cool and original creations for kindergarten kids and primary school... Plus, I can recommend excellent options for paper airplanes in the article https://mognotak.ru/kak-sdelat-samoletik-iz-bumag.html
Well, let's go! As Yuri Gagarin once aptly said).
Interesting ideas on the topic of space with your own hands
First, let's look at what you can make on this topic. For younger kids, it will be possible to make (not without the help of parents) such a layout made of colored paper. All the planets of ours are located on it. Solar System... At the same time, of course, we teach kids the names of the planets.
Application Solar System
You can make such applications from small plasticine balls. Only such compositions are best drawn at first and even painted over with flowers. And then you can already roll up small balls and just stick.
After all, the truth can be submitted to the competition?
Squirrel in a rocket
We sculpt figures of astronauts and a lunar rover from salt dough. Simple . It is pleasant to work with this material for several reasons:
- it hardens quickly and can even be placed in the oven;
- it is easy to paint it later different colors acrylic paints or in gouache;
- environmentally friendly, you can even swallow it))).
Russian cosmonauts and lunar rover
Unpretentious paper rockets can be made by kids 4-5 years old. This turns out to be an uncomplicated kind of origami. And you can glue them on a dark blue background, which will personify outer space.
Rockets in the universe
From toys, jars, tubes and plasticine we will stick just such funny aliens.
Funny aliens
Another option for the competition in the modular origami technique.
We turn on imagination and use everything: foam plastic foam, tree twigs, foil, wire. Even bushings are useful for making rockets.
Gagarin in flight
Plasticine composition with Saturn, stars, a rocket and our green planet.
Milky Way
And a little humor)
Cat in a hat from the planets of our solar system
I hope that we have more or less chosen something for ourselves that we will make and move on.
Simple crafts for kids in kindergarten for Cosmonautics Day
I propose to make a rocket with the kids from a sleeve (you can even toilet) and colored paper. It turns out such a long and stable thing that you can put on a blue background and next to an astronaut figurine.
Add foil and you have a more realistic spacecraft.
Let's fold the paper starship. This can be done simply according to the diagram below.
And here is the ready-made version. Color it however you like.
Or we can fold an unidentified flying machine out of thick paper. You can make several such gizmos and apply them again to the blue sky.
Look at what colorful and at the same time original UFOs we get.
We put into play our favorite baby toy - plasticine. It is pliable, soft and adheres well to almost any surface.
Here are some of the applications you can make with it in disposable plates.
Plates - open space
Oh, and we parted! We sculpt a cute alien. It will just look good next to a paper flying saucer.
Funny alien
Don't feel like folding paper? So let's blind her too, because there is a lot of plasticine!
When working with plasticine, the first thing you need to do is explain to the kids that this is an inedible material and you don't need to take it into your mouth.
Alien and plasticine flying saucer
Space idea from paper and cardboard on April 12
Of components such as paper and cardboard, it is easiest to do work in Kindergarten and school. Because they are always in any home. As well as scissors and glue. If all this is available, then I propose to build such a composition from a flying spaceship, the sun and Saturn on a black background.
To work requires:
- Cardboard with a black background somewhere 30 * 25 cm;
- Toilet paper sleeve;
- Colored paper;
- Foil of golden and silver color;
- Semolina;
- Scissors;
- PVA glue;
- Pencil.
Manufacturing:
1. Cut the sleeve in half. Cut off the edges at one end to form the nose of the rocket.
2. Cut out three blue cones from blue paper and bend them in the middle. These will be our rocket engines. We glue them to the uncut (back) part of the sleeve.
3. Glue the rocket onto the black background.
4. Cut out two petals from red and gold paper. It will be the fire bursting from the back of the ship.
5. We glue the flame and the cut out window.
6. Draw the sun on golden foil, and Saturn with a ring on silver foil. Cut out and glue both shapes onto black cardboard.
7. Apply glue to the background and sprinkle with semolina on top. This is our Milky Way. Beautiful craft ready!
Do you like the collage? If you have schoolchildren, you can make a flying glowing object below.
Video about how to make a flying saucer from a plastic bottle
How to do it - let's see a short video. I'm sure the kids will like the process itself, and then they will play UFO with enthusiasm. After all, this is not just a craft, but with special light effects!
How to make crafts from space-themed discs?
CD-disks are already thrown into the trash, but in vain. After all, this waste material very suitable for souvenirs for Cosmonautics Day. Its shiny and round flat surface is very suitable for the production of unidentified flying objects.
Here is a second grader's masterpiece. She used a disc under a flying saucer with a very cute alien.
And this is the newcomer himself with antennas made of springs and foil.
Interplanetary taxi from the guys from preparatory group in the daycare.
The cutest plate made of rhinestones and fluffy antennas.
O! And here is a whole group of funny humanoids with their vehicles.)
And one more idea how to use CDs.
3D step-by-step postcard in the form of a rocket
If you have never created voluminous postcards, then here is a step-by-step method for you. Again, everything is as simple as two and two. And the templates can be found at the end of my post.
We need:
- Blank A4 sheet of paper;
- The pencil is simple;
- Scissors;
- Colored paper;
- Glue;
- Gouache paints.
Manufacturing:
1. Bend A4 sheet in half. Draw half of the rocket on the fold.
2. Part of the rocket in the photo below is marked with a dotted line. This means that we will not cut it here. And we will cut out all straight lines with scissors.
3. We try to do everything as carefully as possible.
4. We turn our spaceship inside out. It will fold inward and the entire postcard is outward.
5. Draw the details of the ship: nozzles, porthole, nose and flame below.
6. Paint the background black with gouache. And the rocket itself in matching colors.
Here you can fantasize and make the face of an astronaut in the window of the porthole.
7. Draw beautiful languages flame.
8. Cut out different planets from colored paper. We glue them all over the background. You can also make foil stars.
Voila! Our cool volumetric postcard is ready. We give it for its intended purpose.
We make original works for the school competition
Let's get inspired by the ideas of the kids who won the space craft contests. They all tried, working out every detail in their masterpieces.
Any materials at hand were used in the work. These are twine, foam balls as planets, glass stones, felt and much more.
International station
Composition of planet Earth, rockets and two cosmonauts in outer space.
Russian cosmonauts
Solar System with satellite and planets.
And here is a great model made of plastic bottles.
We use felt for volumetric applique.
Intergalactic travelers.
Beautiful applique made of napkin balls.
To make it, you need to roll many, many balls from colored paper napkins. But the work seems to be worth it!
A squirrel and an arrow of salt dough are waving their paws).
A drop of imagination on the theme of the galaxy, starships and UFOs - and a wonderful work is already ready for the competition!
Space pictures and templates
I suggest using cute templates and pictures as backgrounds and pictures. They will fit perfectly when creating postcards or crafts on the topic of astronautics.
On this note, I say goodbye to you for a while. I wish you success in your work and pleasant moments spent with the guys!
In this master class, I will show several options - how to make a paper rocket with your own hands with step by step photos graphs. The hero of a famous Soviet comedy asks the audience a question: "Is there life on Mars?" And he himself answers it: "This is not known to science." A little more than 50 years have passed since the beginning of space exploration, but science has long answered this question in the negative. And as for distant galaxies, into which even electron telescopes cannot look, this question remains unanswered.
Children, as a rule, get their first knowledge about space from children's encyclopedias. After your baby gets laid general idea about astronomy, you can move on to mastering practical skills in game form... To do this, together with your son or daughter, you will have to make a toy rocket out of paper and launch it into the air. The process of creating such a paper craft is shown in this master class. See others how to do it here.
DIY paper rocket
Option 1
To make a rocket, let's prepare
- square sheet of colored paper;
- glue stick.
For our rocket, we used a square of purple paper. Fold it diagonally.
After that, it is required to bend the blank of the future rocket along a different diagonal line.
The folds made allow us to fold our purple square in the form of a double triangle.
The resulting workpiece from above should look as follows.
We put it on the table again and continue working on creating the rocket. For this right side bend the top layer to the midline.
On the left side, you need to make a symmetrical fold. This is how we begin to shape the outlines of the future rocket.
We turn our craft over to the other side and perform the same actions (bend the sides to the midline).
We continue to work on creating our paper rocket. To do this, in the resulting triangles, you need to bend the sides to the middle as follows. First, we do it on the right side.
Then we repeat such folds on the left side of the blank of the future rocket.
Flip the paper craft over to the other side and make similar folds.
The folds just made must be fixed with glue. We do this on both sides of our craft.
Let's start designing the bottom of the rocket. To do this, the protruding lower corners must be bent as follows.
We repeat a similar fold on the left side.
Turning the rocket blank to the other side, repeat the folds of the lower corners.
Now it remains to straighten our craft, giving it volume. You can do this with your fingers with inside... Our paper rocket is ready.
In order to launch it into the air, we need a cocktail tube. Carefully insert it under the bottom of the rocket and blow. This will lift the rocket up a certain distance, the lift height will depend on the force of exhalation and the weight of the craft itself.
Option 2 how to make an origami rocket step by step
On April 12, the Day of Aviation and Astronautics is celebrated in everything. For this holiday, together with the children, you can make a craft in the form of a rocket using the origami technique. It is very simple and interesting to make it.
To make an origami rocket you will need:
- a sheet of blue colored paper;
- scissors;
- felt-tip pens.
Colored paper must be the same color on both sides. Therefore, if there is no double-sided paper, then you can simply glue 2 sheets of the same color with white sides to each other. It is not necessary to use blue paper, you can take a sheet of any color.
First, we need to cut out an even square. Therefore, we bend a sheet of paper diagonally. It is not worth making too obvious a fold, then we will not need this line. It is only needed to form an even square.
Cut off the excess with scissors. Expand the square. Straighten the fold.
Now you need to fold the square in half. We run our finger, forming a clear fold. Expanding. Now you need to take the right half and fold it over to the center fold we just made. That is, divide half of the square in half.
Now we do the same with the second side. We bend to the center.
Iron the folds well. And now we unfold the workpiece again. We got 4 equal parts. Take the upper right corner and fold it to the center fold.
And the upper left corner too. It is important to bend straight here, as this will be the tip of the rocket.
Now lift the right side and fold it to the very first fold on the left. Iron the fold.
And we bend it again, but only along the center line of the fold and back.
Now you need to do the same with the left side. We bend it to the right.
And bend part of it back along the fold line. This is how we made the wings.
Turn the parts over and make vertical cuts from the bottom about 1 cm in length. We make them on both sides. We cut along the upper main part of the rocket.
We turn the part back. Bend the small triangles up. Thanks to them, the rocket will be able to stand on its own.
At both sides:
Take a black felt-tip pen or marker and draw 3 identical circles under each other on the rocket. These will be the windows. And on the wings of the rocket, we just make 3 serifs from the bottom.
This is how you can make an origami rocket out of paper very simply and quickly.
See another version of such a rocket.
3 version of space paper crafts
It is generally accepted that girls love tinkering most of all. But how to attract boys to create a variety of crafts? And technical topics, for example, dedicated to space, will help to captivate them. Invite your son to make a paper rocket. The process of creating such a space craft is shown in our master class.
To make a rocket, a square sheet of paper is enough for us.
We fold the blank of the future rocket diagonally.
Then we bend the resulting triangle in half again.
Now this blank needs to be given the appearance of a double square. To do this, we straighten one corner, after which we give it a square shape.
We do the same with another corner. So we got a double square. We place it with open slices down.
To create the rocket, let's start making the folds. First, we perform them from the top side to the sides.
Having turned over the blank of the future rocket, you need to do the same.
Now, in place of the resulting folds, we need to make inner folds. To do this, we first straighten the bent triangle, and then form an inner fold from it.
This should be done with the remaining three curved triangles.
After that, to form the rocket, we will make bends at the bottom of the blank. To do this, bend the sides from the bottom edge to the middle.
Then you need to bend the sides so that they are parallel to the central vertical line our craft.
We repeat similar actions on the remaining three sides of our workpiece.
Turn the layers of the future rocket a little so that it takes on the following look.
Now let's start decorating the bottom of the rocket. To do this, bend one of the corners to the side.
This is required to do with the other three lower corners.
After that, they must be bent down. We do all this with the formation of an inner fold.
This is what our craft looks like at this stage.
It remains only to straighten its main part.
Our paper rocket is ready.
