How to wash window sills in plastic windows. How to wash a plastic window sill - the right tools and actionable tips

How to wash plastic on windows from yellowness at home? This will help improvised means that almost every housewife has:

1 Soap solution. If the window sill has turned yellow as a result of dust and dirt settling, you can try wiping it with soapy water. To do this, simply dilute liquid soap in water and wipe the contaminated areas. It is better to use laundry soap that has a bactericidal effect.
2 Soda solution. IN large capacity you need to dilute water and 20 g of soda powder. Removable plastic parts must be in this solution for 5-6 hours, and then simply wiped with a soft towel. You can rub the window sill with such a solution and leave for the same time. The yellow will go away.
3 Alcohol (technical or ammonia). It is important to use the alcohol very carefully so as not to melt the surfaces. Alcohol will help remove a variety of contaminants. Before alcohol cleaning, it is necessary to check the reaction of the plastic in an inconspicuous place.
4 Acetone. Moisten a rag or piece of cotton wool with acetone, wipe the contaminated areas. After removing stains, wash off excess acetone so that it does not spoil the plastic.
5 Hydrogen peroxide. Perfectly bleaches and copes with pollution hydrogen peroxide. She launders greasy spots and soot. It is necessary to moisten the sponge with the solution and wipe the contaminated surfaces. You can make a gruel from peroxide and soda. It must be applied to the pollution, left for a while, then rubbed hard and washed off the residue with water. Another option is peroxide with any stain remover. You need to mix them with water and wipe the surfaces, then wash with water.
6 Tooth powder and chalk. Sufficient quantity mixtures of these components are diluted with water until a mushy mass is formed, which is then applied to the window sill, left to dry, and then wiped with a dry cloth.
7 Vinegar. The stain can simply be wiped with vinegar or covered with soda, and rubbed on top with a cotton swab or cloth dipped in vinegar. The dirt will go away.
8 Whitening powder for washing things will also help restore the former whiteness to a yellowed window sill and window frame. Part of the bleaching agent must be diluted with water until a thick slurry is formed. The mixture must be applied to the dirt, wait 10 minutes, then rub it well with a harder sponge until the stains are cleaned, and then rinse big amount water and dry with a paper or terry towel.

Special cleaners

On the shelves of stores you can find a lot of products for cleaning plastic. They may contain different quantity chemicals. These can be chlorine-containing products, acid-containing products, products with large particles.

How to bleach yellowed plastic with specialized production tools? Chlorine-containing products will help restore the primary whiteness of the window sill. You need to wipe it with a sponge dipped in the solution, Special attention giving to dirt, then rinse with water. Such cleaning can be carried out not very often, since chlorine gradually destroys the structure of the plastic.

1 Silit bang perfectly cleans plastic surfaces from various contaminants. It is necessary to spray the product on the surface of the window sill and lightly rub it with a cloth, leave for 15 minutes, and then rinse with plenty of water. The product has a strong odor, so cleaning is best done with open windows.
2 Domestos is a universal cleaner that perfectly removes traces of rust and has an antibacterial effect. It is applied to the window sill for 20 minutes, after which the dirt and gel are carefully removed with plenty of water.
3 Means Pemolux - sparing, it is suitable for dealing with mild pollution. Such a stain remover is applied to the stains with a dry cloth, rubbing vigorously, then the procedure is repeated as necessary, only with the addition of hot water.
4 Cosmofen 10 is a toxic strong agent. When working with it, you must wear a respirator and ventilate the room well. It removes tough aged stains. The agent is applied with a rag or sponge to the contamination. The detergent chemical is washed off with plenty of water, after which the room is thoroughly ventilated. Cosmofen 10 is used in rare cases because it can damage plastic.
5 Mister Proper Universal is a wonderful cleaner, including for the window sill. Available in the form of powder and gel with large abrasive particles. 3 art. l. gel is dissolved in 5 liters of water, the surface is treated, then carefully washed off with water using a soft cloth or microfiber. After that, the window sill should be wiped dry with paper towels or napkins.
6 Mister Muscle for glasses. Since the glass cleaner has alcohol in its composition, it will also perfectly cope with dirt and yellow stains on the windowsill. It must be sprayed onto areas, and then thoroughly cleaned with a sponge.

Causes of yellowing

If yellowing appears on the windows and window sill, this means that the plastic may not have been properly looked after.

The plastic may have been exposed to long-term exposure sunlight temperature changes, strong winds. This could break the structure of the plastic, as a result of which it began to turn yellow.

The profile must be protected with substances such as light stabilizers, antioxidants. Light stabilizers increase the light resistance of the profile, reduce the wear time. Antioxidants increase the resistance of plastic to temperature extremes and oxidation. Such components significantly increase the cost of windows, so many manufacturers order low-quality profiles without protective substances.

It is not recommended to wash windows with dishwashing detergents and other ceramic products. Hard, hard sponges - too, because they violate the structure of the surface of profiles, window sills. From this, the outer shell is broken, turns yellow.

Windows can turn yellow from the use of rough, abrasive powders, metal sponges, scrapers, which also destroy the PVC structure.

It is possible, if funds allow, to replace the packages with new ones - aluminum or wood.

Precautionary measures

When working with spraying agents, aggressive substances, it is necessary to protect the skin of the hands, the respiratory tract with special protective equipment - wear gloves and a respirator. Chemicals must be thoroughly rinsed off running water, and the room is well ventilated after treatment.

Immediately after installation plastic windows look attractive, decorating the room with their snow-white appearance. Over time, dirt from accumulated dust, traces of cups and flower vases appear on the windowsill. Frames may show black buildup of mold or simply yellow. Housewives are trying to wash and even bleach the plastic. But in order not to make things worse, you need to know exactly how to clean plastic windows without damaging their surface.

The window sill is most often contaminated. On a horizontal surface, dust settles more and it is sometimes used as a stand for various objects, resulting in many stubborn stains of dirt. Before washing the window sill, it is better to remove the side decorative plugs from it. This will eliminate the accumulation of small particles of dirt at the joints. A stain-free surface can simply be washed with a microfiber cloth dipped in warm water. Then wipe dry to avoid streaks.

To clean old stains or traces after repair, you will have to resort to the use of cleaning products. They are best purchased at the store, but you can cook at home.

Home Cleaning Products

Extraneous factors often contribute to the manifestation of yellowness or gray spots. This includes sunlight, temperature changes, or simply a change in the structure of the impurities added to the plastic.

All these unpleasant traces are easy to clean with home remedies:

These simple means, available in every housewife, will help keep PVC window sills clean.

Industrial cleaners

For people who do not trust home remedies, manufacturers household chemicals offer a variety of cleaning pastes, solutions and powders. But they can be no less dangerous for plastic if used unwisely, plus they can cause allergic irritation of the skin of the hands.

Of the most popular products that can be used to clean a PVC window sill, the following stand out:

Sometimes the hostesses try to clean heavily dirty surfaces with powders intended for caring for hobs. Yes, they are effective, but before washing the window sill with powder, you need to make sure that there are no abrasive substances in its composition. Solid particles will leave a lot of scratches, spoiling the appearance.

To wash PVC frames, almost the same means are used as for window sills, since the material to be cleaned is homogeneous. If after the repair of the apartment you have to wash the frame just installed windows be sure to remove the protective film. Over time, it will stick and it will be problematic to remove it. After that, ordinary dirt is washed off with water with the addition of laundry soap, dishwashing liquid or washing powder. It is important that any composition does not contain acids and abrasives. Even on new frames can appear small scratches. They are easy to hide by treating the area with a polish.

Shop products for the care of PVC frames

You can clean the PVC frame with the same “Mr. Proper" or similar means used for window sills. However, this list can be slightly expanded:

Domestos gel, specially developed for toilets and baths, is able to whiten yellowed frames;
the basis of the cream "Pemolux" is soda. It is safe for PVC surface and can easily clean stubborn dirt after repair;
it is good to wash off grease from kitchen frames with Comet gel. When using it, it is diluted at the rate of 60 ml of the drug per 5 liters of water;
Cream "Mr Muscle" will help whiten the frames. Rub the PVC surface with the preparation and wash it off with a wet sponge after 3 minutes.

Using any chemistry, one must remember about safety measures and use personal protective equipment.

Folk remedies for the care of PVC frames

You can clean PVC frames at home, as well as window sills, using folk remedies. Let's look at two of the most popular recipes:

Equal proportions of chalk and tooth powder are diluted with water to form a paste. This mixture is applied to a dirty surface and after drying, simply wipe it with a dry soft cloth.
To remove a stubborn stain, sprinkle it with soda and immediately rub it with a sponge dipped in vinegar. The resulting reaction will clean out the dirt, after which the frame must be washed clean water.

Using the unfamiliar folk remedy, you must first test it on small plot and then rub it all over the frame.

Removal of aggressive stains

Often after renovation pvc windows aggressive traces remain, which are not always amenable to removal by store and home remedies. They can also be removed at home.

Tape marks

After removing the adhesive tape, sticky marks remain on the plastic. They cannot be removed with a dry cloth. Folk remedies will help here:

a piece of fresh adhesive tape is glued to the remaining trace and it is torn off with a sharp jerk. The process is continued until a positive result is achieved;
lubricate the sticky spot with any vegetable oil. After 10 minutes, the dirt is wiped off with a paper towel;
the sticky trace is erased with cotton wool or gauze dipped in ammonia or ordinary alcohol.

If there are small traces of tape left, do not immediately resort to aggressive cleaning methods. You can try to erase the stain with a regular eraser.

traces of paint

On plastic, traces of paint are a serious guest requiring immediate removal. First, you need to resort to a gentle method, lubricating the dried paint silicate glue. As the adhesive dries, it will begin to shrink, pulling the bulk of the paint with it.

As with your own hands, if the sashes sagged or it bleeds through the windows.

If this does not help, take a piece of cotton wool, moisten it in a nail polish remover solution and wipe the painted area. It is important to pay attention to the absence of acetone in the composition of the liquid. Otherwise, this substance will corrode the plastic.

Mounting foam

Adhering foam in the wrong place is a common occurrence after repairs. Specially for PVC windows, Cosmofen is sold. Uncured foam is removed with a plastic scraper, and the remaining stain is wiped off with a rag soaked in this solution.

Dry foam should be cut to the maximum sharp knife, and moisten the remaining stain with Dimexide medical solution. After 5 minutes, loose residues are washed off with the hard side of a dishwashing sponge.

The store sells special foam solvents. Before using them, you must carefully study the instructions, otherwise an aggressive solution will do more harm than good. SOL OFF Delicat Barton'S is considered the most harmless to plastic and skin of the hands.

Soot

From the street side, a lot of soot settles on PVC frames. It is formed during the operation of factories and from car exhaust gases. Indoors, soot settles from tobacco smoke and burnt during cooking. Soap solution or baking soda will help get rid of it. They simply wipe the window, then rinse with clean water. Aggressive anti-soot products should not be used.

construction dirt

At the end of the repair, traces of cement, wallpaper glue or plaster remain on the windows. All these residues are easily washed off with soapy water. Strongly solid fractions can first be soaked in vinegar, then washed off.

Having cleaned the window sills and frames from dirt, it remains to wipe the glass. For this there are many store funds type "Second" or just add ammonia to the water. A traditional crumpled newspaper will help to add shine to the glass.

In contact with

Plastic window sill is an indispensable attribute of PVC windows. One of the advantages of plastic is its resistance to contamination, but if something has stained a perfectly white surface, then it is not so easy to wash it off. Let's figure out how to clean plastic window sill!

Cleaning products - how to wash plastic window sills?

All plastic cleaning products can be divided into two main groups: factory products and folk recipes. The former are effective, but require additional costs, the latter are less effective, but practically free, since the right ingredients are always at hand.

Among the factory products there are even special cleaners for plastic window sills and frames. However, if you look at it, the absence of reagents harmful to plastic - solvents, acetone, acids - makes them special. They soften the plastic and lead to the formation of microcracks, from which it is hardly possible to wash out small dust particles. It is also important that the composition of the products does not contain abrasive particles that can scratch the surface.

Rummaging through the shelves of the store, you will find many such products that are being promoted, such as detergents for dishes, floor or bathroom walls - the content is the same, only the advertising is different. Agree, buying a whole jar of a special cleaner for two or three window sills is simply unprofitable. Therefore, experienced repairmen and housewives prefer universal tools, such as Domestos, Mr. Proper, Comet and cheaper counterparts.

Folk recipes are not as effective and require a lot of physical effort and cleaning time. However, they have a significant advantage - many products are safe for children, do not pollute the air with harmful chemical compounds, do not emit vapors and do not leave marks on the surface. In addition, you can prepare such a detergent, if not for free, then very inexpensively.

The safest for plastic is a soapy solution or a paste of soap or washing powder.

ammonia, lemon acid, baking soda or mustard are not applicable to plastic window sills! They can leave behind micro-scratches or lead to the formation of cracks. It is very easy to prepare the solution - grate a piece of any soap (40-50 g) and dilute in a small amount of warm water until completely dissolved. The higher the concentration, the better. You can do the same with washing powder, the main thing is that the grains are completely dissolved.

How to wash and bleach a plastic window sill - construction pollution

Windows, and with them window sills, are installed in the room long before the end of the repair. So they usually face a lot of risks of being dirty. The film, which is designed to protect window sills and window frames, does not always cope with this task. The master who left behind dirt is bad, but the fact remains that the repair is completed, and you are puzzled by the problem of how to clean the plastic window sill and frame. With glass it is much easier - dirt and sticks to it with difficulty. How to clean and wash plastic window sills to restore their perfect look?

How to wash and bleach a plastic window sill - a step by step diagram

Step 1: Remove Dirt and Dust

To begin, remove the end caps (if any) to prevent dirt from accumulating at the junction of the caps and the window sill. Clean the surfaces from ordinary dirt and dust: first, gently sweep the dirt from the window sill with a dry rag or broom, or vacuum it, and then wipe the residue with a damp cloth. It is best to use not just any rags, but a microfiber cloth, or at least cotton, flannel or fleece.

Step 2: Apply the product

If there are dirt sticking to the plastic on the surface (plaster, putty), apply paste or gel on them and let the dirt soak for 2-5 minutes. In the case of stains of polyurethane foam (), which could stain the window sill during window installation, it will be more difficult to remove the pollution. In this case, first cut off as much of the foam as possible, and then apply a paste or gel, or a special solvent to the remains. Try to apply solvent only on the foam itself. Leave the stain to soak with the cleaner for 10-15 minutes - during this time the foam should get wet and soften.

Step 3: Get Rid of Tough Dirt

We wash off the paste or gel and use a rubber spatula to pry off the remaining dirt. The mounting foam will have to be slightly scraped, but a rubber spatula or a brush with hard bristles will not harm the window sill.

Step 4: Stripping

Wash off the remaining dirt with plenty of water and wipe dry. If other stains are found, repeat the procedure.

From time to time, at least twice a year, rubber seals, which are used to fix glasses and hide cracks, should be lubricated with silicone grease. It is usually recommended to do this before the onset of cold weather and in the spring. After you managed to wash the plastic window sills, glossy surfaces can be rubbed with a special plastic polish, which is sold at any hardware or hardware store.

How to wash and clean plastic window sills - household pollution

Streaks from windows, traces of flower pots, rust - how can you clean and wash a plastic window sill from these contaminants? There are plenty of ways to deal with them! If you trust only household chemicals, then in your “arsenal” of funds there must be various gels famous brands: Sif, Domestos, Mr. Proper, as well as a sponge with a hard side and rubber gloves for cleaning. Read the label carefully - many manufacturers indicate that their products are also suitable for plastic.

In order to return the radiant whiteness, experienced housewives use Domestos- the result will really please you.
Effective for quick cleaning Mr. Proper- everything, as in advertising, wiped and clean.
If rusty streaks appear on the window sills, it is best to deal with them Cillit.
Traces of children's "arts" - strokes of wax crayons - are effectively removed by a melamine sponge.
To cope with small stains or dust, wet wipes designed for office equipment or for the kitchen will help.

And yet there is such a stage of window sill pollution, as in that joke about children: “Honey, will we wash these or give birth to new ones?” Such consequences could be caused, among other things, by errors during cleaning, when products with acids were used for a long time, damaging the structure of the plastic. The window sill acquires a gray, dirty shade, which is not washed off by anything. In this case, only save. Choose a thicker film, it will withstand any test in the future. It does not have to be white - it can be a marble-like or wood-like film, as well as a wide variety of patterns and colors. In the end, if you can’t decide, buy several options at once, fortunately, the cost of the film itself allows this.

Before gluing, get rid of dust and other dirt and wipe the window sill dry. Then, on one side, peel off the film from the protective paper layer and gently stick it to the window sill. Gradually peeling off the protective layer, press the adhesive side against the window sill with a rag or a special rubber roller, pushing out air bubbles. It's not scary if the film went obliquely - you can safely peel it off and stick it again, it will not lose its properties, if you, of course, got rid of the dust in advance.

The main advantage of plastic surfaces is their resistance to contamination. The glossy or smooth structure of the polymer contains practically no micropores and, accordingly, is easily exposed to wet cleaning. Its effectiveness increases significantly and, as a result, the service life of plastic structures and surfaces increases if you use the right detergents and follow simple recommendations.

How to wash plastic windows? How to clean dirty window sills, plastic panels or doors? All means for the care of plastic, conditionally, can be divided into 2 groups: factory-made and home-made (folk). Everyone is free to choose what he likes and can afford.

Factory detergents. There are a great many of them on sale: from well-known brands like Mr. Propper or Comet to numerous products produced by domestic manufacturers. The main sign by which it is worth choosing detergents for cleaning plastic (unless, of course, the price plays a role) is the absence of solvents, acetone or acid-containing compounds in their composition. Cleaning products with aggressive components soften the plastic, violate the integrity of its surface.

Folk recipes. They are less efficient (physical effort for cleaning will have to be spent an order of magnitude more) than the products of chemical giants, but they have several significant advantages.

Firstly, this is the only option for cleaning rooms where children are and spend time. Absence chemical compounds makes their stay harmless, no vapors are emitted into the air.
Secondly, the cost of self-prepared detergent is several times less chemistry for factory cleaning.

For adherents natural remedies you can recommend preparing an ordinary soap solution. To do this, you can plan a small amount of laundry soap (30-40 grams), which will need to be diluted with warm water. The mixture is ready when, by continuously stirring it, it will be possible to achieve complete dissolution of the soap.

The process of washing plastic surfaces. The easiest way to clean window sills. Wash them thoroughly with detergent and rinse off its remnants with water.

Advice! Remove (if any) sill end caps before cleaning. This will allow dirt not to clog at the junction of the plug and the window sill.

Washable plastic panels the same way. If the plastic has significant seams between the elements into which dirt is clogged, it can be easily removed with a small rubber spatula, followed by washing.
Plastic windows and doors are a little more difficult to wash, due to the fact that, in addition to the plastic surface, they have rubber seals, fittings and glazing. When washing these constructs, it is best to adhere to the following algorithm:

Preliminary cleaning of doors and windows with water. With its help, all light dirt should be washed away. At the same stage, drainage holes in plastic windows are cleaned and freed from dirt.
Uniform application of detergent to the surface. After that, you can stop for a couple of minutes to dissolve old dirt.
Wash directly. Use a soft cloth to vigorously wipe the entire surface of the windows, including the double-glazed window.
If unremoved dirt remains, the procedure must be locally repeated from the second point.
With the help of plain water, the surface is cleaned of the remnants of the detergent, the double-glazed windows are washed.
Rubber seals are lubricated with silicone grease to prevent them from drying out.
With the help of a glass cleaner, the final washing of double-glazed windows is carried out.

Advice! It is enough to lubricate the seals 2 times a year (before the onset of cold weather and in spring), and not at every cleaning.

Although plastic care products do not contain overly aggressive components, hands still need to be protected. rubber gloves. At a minimum, this will help to avoid overdrying of the skin and its microtraumas.
Ideal cleaning of plastic panels is obtained if the surface is freed as much as possible from all attachments (lamps, sconces, paintings, etc.). Although it takes a little more time, it significantly improves the quality of cleaning.

Advice! If the hinged lighting equipment is removed, it is necessary to carefully insulate the ends of the wiring.

Any cleaning agent chosen should be in a diluted form or have a gel-like consistency. Washing powders and other substances containing fine abrasive particles can scratch plastic surfaces. At first it will not be noticeable, but subsequently, dirt will accumulate in these micropores and the plastic will quickly lose its visual appeal.
For cleaning, it is best to use a microfiber cloth. It does an excellent job of cleaning and leaves no streaks or streaks behind. If you don't have a cleaning cloth handy, you can use any piece of fleece, flannel, or cotton.
Before use detergents it will not be superfluous to wipe the plastic panels with a wet cloth. It will remove light dirt and dust. After that, you can use special products to clean old and stubborn dirt.
Ordinary water should be used to finish cleaning. This is necessary to completely wash off all chemicals or soap from the surface of the plastic.
After cleaning, glossy plastic surfaces can be treated with plastic polish, which is sold at any hardware store.

After reading this material, the video located on our website will help you with the questions that have arisen. The video review shows key points and subtleties of effective cleaning.

Are you starting repairs in a house or apartment where metal-plastic windows have already been installed? Be prepared for stains and stains of various nature to appear on the frame, glass and window sill. Plaster, paint, adhesive tape, dust and dirt - do not full list window "enemies". It is important to know how to wash plastic windows so that scratches and scuffs do not form in place of stains.

Washing windows is a mandatory procedure not only after repair. Caring housewives prefer to do general cleaning every spring, and some even more often. Some hire cleaning companies to help clean windows inside and out. The service of such services is an expensive pleasure. If you care about the cleanliness of your home, but do not want to spend extra money, learn how to clean windows safely and correctly.

Basic Rules

Many housewives, in a fit of delight, rush to wash new windows, barely slamming the door behind the installers. This is the first mistake. Mounting foam, which is blown into the gaps between the windows, should dry. After that, the foam must be cut evenly and the slopes processed. It is advisable to carry out this procedure 1-2 days after the installation of window structures.

Window sill and plastic frame of new windows covered protective film similar to tape. If within 2 weeks the room will be held any construction works, including painting slopes, do not remove the film. It will protect the plastic building materials and possible mechanical damage. But you should not leave the film for more than 14 days. Over time, the adhesive changes its structure and can eat into the plastic. On the inside It is better to remove the adhesive tape immediately: under the influence of sunlight, the glue dissolves much faster.

Tools and household chemicals

Set knives, spatulas, screwdrivers, scrapers and hard sponges aside. When you try to clean plastic windows with sharp objects, you risk leaving deep and small scratches and scuffs on them. Use a soft sponge or cloth to clean. Glass is an exception. Stubborn stains can be removed with the abrasive side of the sponge. With a slight pressure on the sponge, you will not leave scratches on the glass, unlike soft plastic.

The choice of household chemicals should be treated even more responsibly:

Abrasive cleaning powder used for cleaning plumbing and hobs, prohibited. It should not be used to wash both plastic and glass elements.
Do not use aggressive products containing acids or alkalis. Do not use bleach or gels for washing plumbing.
Detergent must be liquid. This can be a non-abrasive gel for cleaning glass hobs, dishwashing detergent or a strong soapy solution. It is better to use special sprays or gels for cleaning windows.
If for some reason you do not want to use industrial products, you can cook washing solution on one's own. First option: dissolve 1.5 tablespoons in 1 liter of cool water. potato starch. The second option: dissolve a full glass of table vinegar (9%) in 1 water. The third option: dissolve in 1 liter of water 2 tbsp. ammonia (ammonia).

Be warned: using "homemade" window cleaners will delay the process. Industrial tools help to clean windows from dirt faster.

Stages of washing a plastic window

Having determined how to clean plastic windows, you need to know how to do it correctly. We can distinguish the main stages. Following the correct order helps to complete the procedure much faster.

Always start cleaning windows from the frame (both inside and out). After processing the frame around the entire perimeter, you can proceed to cleaning the glass.
Clean the glass from the main layer of dirt or dust. To do this, use a cloth or sponge soaked in warm water. Do not use detergent at this stage.
After cleaning the glass from a layer of dust, proceed to a "deep" cleaning. Arm yourself with a soapy sponge and start cleaning the glass from top to bottom. Don't miss a single inch. Pay special attention to the joints between the frame and the glass. Dust is always clogged into the silicone layer.
For glass cleaning soap suds on the outside of the window, use a water scoop with long handle. The outer side of the glass can be cleaned of foam with a squeegee or a clean, damp cloth (preferably flannel). It is enough to wipe the glass several times to remove the soap solution.
With a dry cloth, go over the joints between the frame and the glass.
Washed glass must be rubbed to a shine. To do this, you can use special alcohol-containing products ("Clin", "Cif", "Mr.Muscle"). Use microfiber or any soft cloth as a rag.

Windows without streaks can be obtained without using special means. Ordinary old newspapers will help you with this. Washed from the soap solution, the windows should be rubbed dry with a crumpled old newspaper. To improve the effect, spray water with vinegar or ammonia on the glass. Thin newsprint perfectly absorbs the remnants of excess moisture, leaving no streaks on glass and mirrors.

How to whiten a window sill

Washing the window sill is a more difficult task. On previously white and clean plastic, dark circles from flower pots, layer of dust and yellow spots. It is yellowness that is considered the most dangerous enemy plastic window. It appears under the influence of sunlight, improper selection of detergents or from external pollutants (such as tobacco smoke and fat deposited during cooking).

Before you get rid of yellowness, you need to remove all foreign objects from the windowsill. Most window sills have a porous structure. Dust, dirt and soot linger in the pores. To wash the window sill, use soft brushes and sponges. Avoid aggressive detergents (powders, products based on acids and alkalis). A soapy solution of water and dishwashing liquid is enough. Liquid soap better not to use.

The window sill cleared of dust is ready for bleaching. You can get rid of yellowness with the help of the following tips:

Use a chlorine-based product: bleach or stain remover. Apply it to a clean, dry window sill and leave it on for 1-2 hours. Remove bleach residue with a clean, damp cloth.
Prepare a mixture of washing powder and baking soda. Mix the components in equal proportions, add a small amount of water to make a "slurry". Apply it to the plastic surface in a thin layer, leave for 45 minutes. Remove the rest of the mixture with a damp sponge.
Chalk or tooth powder can be used to whiten window sills. Both substances are absolutely safe and do not require any precautions. Before use, the chalk must be crushed to a powder. Dampen a sponge or soft brush in water, dip into a jar of powder and treat the window sill. After 1 hour, remove any remaining powder or chalk with a clean, damp cloth.
A window sill can be bleached of yellow stains with a mixture of vinegar and soda. This tool easily removes even stagnant stains. Sprinkle a small amount of baking soda on a dry window sill. Soak a sponge in vinegar (not a solution) and use light, circular motions to work over any yellow spots. The substances will react, and foam will form on the windowsill. Do not leave the mixture on the windowsill for more than 15 minutes.
Ordinary medical alcohol saves from yellowness. Soak a cloth or sponge in alcohol and "walk" along the entire length of the window sill. During the procedure, put the vents on the "ventilation" mode, as alcohol releases toxic substances. At the end of the procedure, wipe the window sill with a clean, damp cloth.

If none of the above methods of rehabilitating the old window sill helped, do not despair. "Update" windows with a special self-adhesive film. It can be purchased at the supermarket. If you want to “fit” old window sills yourself, watch video tutorials on the Internet.

How to wash a window after repair work

When you try to clean plastic windows after repair, you will encounter a lot of stubborn dirt: paint stains, primer streaks and sticky tape residue. Do not despair: you can wash even the most "caustic" substances.

Dye

If it is necessary to wash or wash off the paint, the law applies: the sooner the better. Fresh drips and splashes from paint can be completely removed with a damp cloth. If the repairmen did not show sufficient care and left behind dried drops of paint, you need to be resourceful. It is important to choose a product that will not damage the plastic, but will remove the paintwork material.

Sunflower oil. Generously lubricate the paint spots with any vegetable fat and leave for half an hour. Then remove with a cotton swab or wet sponge. If some drops are not removed, remove them with a wooden stick or a rubber spatula (for grouting). Do not use a utility knife or metal spatulas to avoid scratching the glass or soft plastic.
Solvent. When choosing a solvent, consult the shop assistant. It is important to clarify from which surface you have to remove the paint. Glass can withstand more aggressive agents, but plastic can become cloudy or yellow.
Soap solution. Water and soap will help to remove easily water-based paint. In the fight against oil paint she will remain powerless. Soak stain with warm water laundry soap and leave to "limp" for half an hour. After that, the stain can be easily removed with a damp cloth.

Scotch

The question of how to wash the adhesive tape worries especially often. Over time, the adhesive changes its structure, and it becomes very difficult to clean it from glass or plastic surfaces. However, there are "secrets" to help remove traces of adhesive material:

Eraser ("trowel"). A regular pencil eraser helps to remove the sticky coating on the glass and window frame. It is enough just to rub the contaminated area with an eraser and remove the glue that has rolled up with a dry cloth. The disadvantage is the duration of the procedure and the difficulty of cleaning large areas.
Butter. Glue changes structure when interacting with vegetable oil. It is very difficult to clean windows in this way, since it will take a lot of time to wash off the grease.
White Spirit. Before applying white spirit to plastic frame or window sill, be sure to test the tool on an inconspicuous area. Some materials do not tolerate solvent interaction. Apply the product to a cotton pad and treat the traces of glue.

Primer

Primer is one of the most "dangerous" materials during repairs. The thing is that the drops of the primer almost do not differ from the drops of water. They are difficult to notice on the windowsill, glass, tile or linoleum. After drying, the polymerization process takes place and the primer dries. To wash the windows from the primer will help:

Water. The best way wash the primer - soak it. Moisten dried drips and drops for 5 hours. The water dries quickly, so repeat the procedure every 30-60 minutes. After 5 hours, the primer will be removed with a regular sponge.
Remedy limescale. To remove the primer from the window structure, the tool " Cilli Bang". Spray the liquid on glass and plastic parts, leave for 5 minutes, then remove with a damp cloth.
Solvent. Before using any solvent, do a small test on a hidden area of the plastic. Instead of professional tool Acetone or nail polish remover can be used.

Precautionary measures

To make it easier to clean windows at home, you need to follow these precautions:

During repairs, be sure to protect windows from building materials and mechanical damage. Use cardboard, film, masking tape. With ordinary (transparent) adhesive tape, you should be more careful. Be sure to cover the window sill so that it does not serve as a stand for construction tools.
Place flower pots on napkins. Do not use pots without a special tray: after watering dirty water flow out onto a clean window sill.
Be attentive to the choice of means for washing plastic surfaces, fittings and glasses. Pay no less attention to the choice of suitable tools.
Take care of your own health. Wear gloves when handling solvents, chlorine and alcohol. For complete safety, wear protective goggles.

Clean windows are the key to beauty and comfort in the house. The suggested methods will help you clear the traces repair work and wash metal-plastic windows from household dirt and dust.