How to assemble a frame for a sliding door. How to make sliding doors - why not miss a single millimeter? How to make sliding doors: preparing the canvas

Installing sliding doors is one of the ways to solve the issue of rational and competent use of every meter in the apartment; you can do them yourself. Information on how to implement this and what is needed to make the structure will be useful for many owners of small-sized housing.

Varieties

In a specialized construction supermarket you can see a huge variety of models of sliding doors. They are divided into types and subspecies, taking into account various parameters:

dimensions;
forms;
material;
functionality: parallel-sliding and folding.

Depending on the design and material of the model, its price category also differs, and given how rich the choice is, everyone can find a door option that suits them.

Sliding doors

This type of sliding door is the most common. It consists of one or two sections, which, when opened, move into one or different sides. In this case, the leaf panels are suspended on a rail mechanism, which sets them in motion.

Cassette

The principle of operation of the cassette system is similar to that of a compartment door, with the only difference being that when moving the door is hidden in a special niche, which is camouflaged in the wall. It is sold complete with doors, but if we are talking about making it ourselves, it is made mainly from plasterboard.

Cascade

Cascade doors are a structure of several leaves, one of which is fixed in a stationary position, and the rest move along a rail mechanism across the entire width of the opening when closing. When the structure is opened, all parts of its fabric are assembled on the side of the fixed sash.

"Book" and "accordion"

These types of doors are almost identical. Their designs consist of several sections connected by special hinged hinges, with the help of which the sashes are compactly assembled on one side of the opening. The difference between “book” and “accordion” is only in the number of sections involved in the design.

For reference! It is not for nothing that these mechanisms are called “book” and “accordion”, as they resemble the principle of their movement. Their action can be compared to moving a screen.

Sliding door mechanism

Regardless of the type of sliding interior doors, the operating principle of their mechanisms does not differ significantly. Rollers are mounted on the canvas, which, moving along the guides, ensure the movement of the sashes.

The guides are usually attached to the wall, but in some cases they are also fixed to the floor. In the case of framed door options, a separate running element must be installed on each section.

Sliding door devices are divided into hanging and rail. In the case of a suspended mechanism, the running gear, one or more, is installed only on top of the structure, and an additional roller is fixed below to ensure easy movement.

The rail mechanism looks the same, but the running elements are attached both above and below the door frame, that is, the lower roller does not move along the floor, but along a rail built into it. This design is more resistant to heavy loads, so it is suitable for door models with large dimensions.

In order for the device to operate smoothly, it is necessary to carefully ensure that dirt and debris do not accumulate on the bottom rail.

Step-by-step instructions for installing a sliding structure

Before you buy all the necessary components to make a good-quality sliding door yourself, you should make sure that its installation is possible in a particular room. It must meet the following conditions:

the wall is strong enough to support the weight of the entire structure;
the doorway is level;
The width of the wall is enough to roll back the sash.

If the room meets all of the above parameters, you can decide on the type of model and begin preparing for installation. To select the most suitable option For self-made, you can use photo or video catalogs that can easily be found on the Internet on popular platforms.

What is required to install the compartment?

One of the simplest models to make with your own hands is a single-leaf sliding door.

For reference! To install a sliding sliding door with one section, you will need a minimum set of tools, such as a screwdriver with self-tapping screws, building level and roulette.

The mechanism for the design can be purchased ready-made or assembled from parts:

running parts;
staples, clamps;
roller carriages;
platbands.

When choosing a canvas, you should consider that it optimal size is considered to be the one that slightly exceeds the perimeter of the opening, and the length of the guide rail is twice the width of the door.

Installation of the structure mechanism

First you need to determine the height sufficient for the door to block the entire opening when closed. To do this, apply a sheet to the wall of the proposed installation and to the side where the sash will slide off and, taking into account the height of the rollers, as well as an approximate distance of 2 cm, use a pencil to mark the place for attaching the guide. The result should be a smooth horizontal line.

Next, a guide is installed on the drawn line, which can be fixed to the wall with self-tapping screws or special brackets. At this stage, it is important to take into account that there should be a small distance between the sections and the wall.

After securing the guide, you need to assemble the roller device. To do this, mount the carriages, insert a screw into them and place them in the running element. Their number directly depends on the weight of the sash, that is, the heavier the structure, the more of them will be required.

Securing the sash

First of all, staples are placed on the door leaf at a certain distance from each other, but in such a way that they can withstand the weight of the entire section. Then the sash must be lifted, thread the screw into the brackets, and then fix it at the desired level. To make the structure even, the best solution will take advantage of someone's help.

After the canvas is hung on the chassis, clamps are installed. They should be positioned in such a way that the leaf completely covers the doorway when closing and moves to the side at a convenient distance when opening.

Handle installation and finishing

To fully use sliding doors made by yourself, it is enough to install a mortise handle on them, ready-made option which is easy to find in a construction supermarket.

Attention! If it is necessary to install a locking device in the structure, then you should choose a vertical type lock.

The final stage in making doors with your own hands is their final finishing. It includes hiding the slopes behind the platbands and decorating the guide with a suitable strip. After which the installation of a single-leaf compartment door can be called complete.

If your budget does not allow it, but you still need to free up space in a small room, you can make sliding interior doors yourself, even using improvised materials. To make them, you will need any suitable fabric, for example, old door, and as a guide rail - an ordinary steel cornice with hinges. However, the service life of such a design is short, and no one guarantees its safety.

2018-04-18

In this article we will deal with the question of how to do sliding doors with our own hands and tell you how easily and simply old swing systems can be converted into more convenient sliding systems.

How to make sliding doors with your own hands: 5 steps

Sliding doors or partitions, you see, are very practical solution in many ways, both for small and for large apartments. Zoning of space, saving space, the ability to arrange furniture in a certain way - these are some of the main advantages that are worth mentioning. However, for most, all the advantages come to naught when it comes directly to the cost. I will try to refute the opinion that sliding doors are too expensive, and I suggest you make them yourself.

For work you will need: a door leaf without fittings, wheels, a metal cornice (remember the length of the cornice - it should be at least twice as long as the door itself), metal hinges, paint, nails, screws, drill.
Step 1: Process the door leaf, sand it, paint it in your preferred color.

Step 2: Using screws, screw the wheels to the bottom of the door in two places.

Step 3: We screw in metal loops from above, which should eventually slide freely along the cornice.

Step 4: Attach the cornice to the wall with one side first, then insert it into the hinges and fix the other end of the pipe.

Step 5: For convenience, you can install door handle. The doors are ready!

DIY sliding doors: let's go shopping

Before you go to the store to buy everything you need to make a sliding interior door with your own hands, you need to take a tape measure and take some measurements. In particular, you will need to know the width and height of the existing door leaf– the height is usually standard and is 2000mm, and the width can be 600, 700 or 800mm. Knowing these sizes, you can already purchase everything you need. To be specific, you will need to buy the following.
The most important component, without which the operation of such doors is impossible, is the sliding mechanism. In principle, if you indicate the width of your canvas to the seller, he will select the necessary mechanism for you, but for general development you need to know that its length should be twice as long as the door leaf. You can purchase a slightly longer mechanism - it can be easily cut if necessary.
Fittings for sliding interior doors include handles and a specially designed lock, if needed.

In principle, this is already quite enough to remake the old swing door into a sliding one. But, as they say, everything needs to be done thoroughly and it is not at all necessary to stop there. You should also think about a new one door frame(for it you will need a rail, the width of which corresponds to the thickness of the partition in the doorway - it needs 5 m), platbands, a strip covering the sliding system for doors and a stop strip if we are talking about lockable sliding doors interior doors. And, of course, a brand new door leaf will come in handy - only in this case will you be able to make a beautiful doorway.
You can select and purchase everything you need both on the market and in large construction stores. The price of the issue is not that high - at least less than the cost of similar swing doors.
How to make sliding doors: preparing the door leaf To prepare the door leaf of a sliding door, you will need either a hand router or a grinder with a drill, hammer and chisel. What you will work with is, of course, up to you, but I will add on my own that through hand router All work is performed more accurately and, most importantly, more accurately. If we imagine the process of preparing the canvas for the installation of sliding doors point by point, it will look like this.
As a warm-up, along the lower end of the door leaf, strictly in the center, you need to cut a 3mm wide groove - it is necessary for the operation of the lower guide, which at the same time serves as a stop and does not allow the leaf to swing back and forth during operation. This is best done using a hand router, but this work can also be done with a grinder, equipping it with a wood wheel with a fine tooth. Now we open the sliding mechanism and find a pair of rollers and brackets in the kit. First, we connect the rollers with the brackets - for this, the latter have holes in which the former are secured using two nuts and washers. Now we take the resulting nodes and attach them to the upper end of the door leaf and outline their contours, after which we select grooves with a depth that is equal to the thickness of the metal of the brackets. And then, using a screwdriver and self-tapping screws, we screw the rollers to the canvas. In principle, you can do without inserting staples into the end of the canvas - if you simply screw them to the end, then appearance fewer doors will be damaged than if you cut grooves, especially if this work is done with a hammer and chisel.

Now you need to install the lock.

Finally, you will need to install special handles for sliding doors - for them you will also have to cut either two grooves on both sides of the leaf, or one oblong through hole. It will be easier with the latter - we drill a small through hole in the blade, insert an electric jigsaw blade into it and cut out a seat in accordance with the pre-designated contour.

The work with the canvas is completed, now we move on to the sliding mechanism and installation of sliding doors.

Door installation: installation of the sliding mechanism and connecting it to the door leaf

The sliding mechanism is installed quite simply - all that is required is to secure the guide profile in accordance with the horizon level and the location of the doorway. Here you can highlight just a couple of nuances.
The edge of the guide should protrude 50mm from one side of the opening. On the other side of the opening (the one into which the canvas will open), the profile should extend exactly to the width of the canvas. This point needs to be calculated and the door guide trimmed if necessary. Installation height sliding mechanism– calculations are also needed here. This installation size consists of two components - the height of the door leaf including the rollers and the gap under the door, which is 10-20mm (depending on the curvature of the floor).

The installation itself, or rather the distance of the guide from the wall.

Here again, everything depends on the curvature of the walls - if they are smooth, then the guide, without any additions, is attached directly to the wall through pre-drilled holes in it. If the wall is curved, then you may need to move the guide some distance away from it - in this case, first attach it to the wall wooden slats, and only then the guide is fixed on it. You can clearly see the process of installing a sliding door in this video.
The door leaf is installed on the guide quite simply - the rollers are inserted into it from the side. After the door takes the required position, you will need to attach a stop to the floor, for which we selected a long groove from the bottom of the door leaf. We open the door as much as possible so that they don’t fly out, inside the guide we first attach a rubber cushion, which acts as a limiter, using a metal screw, and then we insert the stop halfway into the lower groove of the door leaf and fasten it to the floor with dowels on one side. Now we move the canvas towards the closing side, select its desired position and again fasten the upper travel stop of the canvas again, and then finally fix the floor stop with two more dowels.

In conclusion, I will say a few words about the design of the opening itself - without this stage of work, the installation of sliding interior doors will be incomplete. From a strip 10-20 mm thick and a width corresponding to the thickness of the wall, some semblance of a door frame is rolled up, which is mounted in the opening using polyurethane foam. When the polyurethane sealant has dried, platbands are installed on both sides of the box. If you plan to install a door with a lock, then instead of one of the platbands, a thrust beam with a groove for the door leaf is installed. The counter part of the lock is also mounted in the same thrust block.
That's all. All that remains to be added is that the opening itself can be designed in different ways, and a wooden slat is not a panacea. For example, laminate looks quite good in this place (it is also mounted on foam), and harmoniously selected natural stone or regular tile. In general, there is a lot to think about here, and the choice of materials for decorating the opening depends solely on your preferences.

In an effort to make your home more comfortable and cozy, you often come up with the idea of replacing conventional swing doors with sliding doors (they are also called sliding, sliding, hanging). The good news is that you can install sliding doors yourself without any problems. The bad thing is that a normal mechanism costs about the same as a high-quality blade. What is captivating about them is that when open they hardly “eat up” space. They either hide in the wall (a better, but more difficult to implement option), or move along it.

All this is true, but there is a significant drawback - a very low degree of sound insulation, especially in the sliding door version. When the canvas simply covers the opening. When installed in a pencil case (in the wall), the situation is a little better, but the degree of sound insulation of a swing door cannot be achieved even with this installation method. If all this doesn’t scare you, you can start studying the systems, selecting them, and then installing them.

Sliding door systems

There are two types of mechanisms: suspended and rail. Neither is perfect. Briefly about their advantages and disadvantages below.

Top rail suspension system

The suspension mechanism is load-bearing beam, to which is attached a guide in the shape of the letter “P” with “legs” bent inward. The rollers to which the door leaf is attached move along this guide. In technical terms, it is a hanging door on a top rail.

When installing such a door, the floor under the door remains smooth, only the lower roller is installed on the right and/or left in the doorway. It slides along a groove made in the lower end of the blade. It is necessary so that when moving it does not deviate vertically. This design is the easiest to install. Installation is very simple and consists of several steps:

That's all. Doors on rollers are installed. But this system, in the form shown in the photo, has very low noise insulation characteristics. They are practically zero: the passage is simply blocked.

Rail sliding doors

This type of door has two rails: top and bottom. Rollers are also installed at the top and bottom. Thanks to this design, the system has high degree rigidity: it can be shaken, and this will not cause much damage.

The disadvantage of having rails in the floor is known: they are difficult to clean. Debris and dust constantly get into the grooves, so you have to keep them clean. This type of door is most often used in cabinets. They are used as interior doors if there are active children in the family. Then safety is more important than difficulties with cleaning.

Mounting options

Regardless of the sliding door system, installation methods can be:

The simplest installation option is sliding doors. They can be installed independently, not only at the repair stage, but also after it. It is only important that the opening is smooth and the wall has normal load-bearing capacity. The disadvantage of such a system is that you cannot place anything close to the wall in the place where the door rolls back. There is one more: very low sound insulation. This is easy to explain: if you look from the end, there is a gap of several millimeters on the sides. It is necessary so that the canvas does not “shuffle” along the wall. And all sounds penetrate perfectly through it, becoming only a little quieter.

Cassette doors are good because when open, the door leaf is located in a niche in the wall and does not interfere. The second advantage is that seals can be installed around the perimeter of the opening, which provide much higher sound insulation performance. The disadvantage of installing a sliding door in a niche is that it can only be done at the renovation stage. The second drawback: to make a pencil case for sliding doors, they usually install a false wall, and this means stolen centimeters of space.

Cascade doors are one of the types of sliding doors. It just has large quantity guides: according to the number of movable door leaves. Installation is perhaps the most difficult: there are many parts and high installation accuracy is required. The systems belong to the elite category, and they rarely save on installation: repairs will cost more.

Features and installation procedure

You can install sliding doors yourself even without much experience. It is quite possible to do without installers. It will take a little time, and also installation instructions. We will try to give detailed description process with photo and video materials.

Self-installation of sliding interior sliding doors

Systems may vary slightly, but general rules remain the same. There are several requirements that must be met before installation:

The opening must be level, otherwise you will have to take a canvas that covers all deviations with a margin.
The load-bearing capacity of the sides of the doorway should be high, as should the wall above it.
The opening must already be finished: plastered and painted, covered with wallpaper or decorated with decorative panels.

Next we proceed to assembly. First you can attach the rollers. U different manufacturers There are some recommendations. Some recommend retreating 1/6 of the width of the door leaf from the edge; in other systems, they are attached immediately from the edge, and the mounting plates provide the indentation. This is the system we install: in it, roller platforms are installed immediately from the corner.

Marking the installation location of the rollers

We center them, measuring so that the distances are the same. Having positioned the plate, use a pencil or marker to mark the locations for the fasteners. Drill holes in the marked places. The diameter of the drill is 1 mm less than the diameter of the screw.

We set the plates and screw in the screws. The length of the fastener depends on the weight of the canvas, but not less than 70 mm. We twist them exactly perpendicularly, otherwise unnecessary stress will arise.

Installation of rollers

Supports for the rollers are inserted into the installed plates. They are fixed with a lid on the side surface. Next, roller platforms are screwed onto the threaded pins.

It is also convenient to install handles and locks before hanging. They need special, mortise ones. If you bought ready set, the required holes are available. If you have used a regular canvas, you will have to trace the outline with a pencil and remove the excess with a chisel. After the handle or lock fits into the recess, the attachment points are marked, holes are drilled for them and the fittings are installed.

Most convenient way- hang the sliding doors on a dry wooden beam. Its cross-section is less than 50*70 mm, its length is twice the width of the door leaf + 5 cm. We cut the guide to the same length.

Having aligned the guide along the beam, it is attached to the beam with self-tapping screws no less than 8 cm long. The number of fasteners is at least three, departing 10 cm from the edges and in the middle (more often is possible, less often - not).

Now you can measure at what height to mount the timber. On the door with installed rollers“roll” the guide with the beam. This way you can accurately note how tall the doors are. We drill at least four holes in the side edge of the beam for mounting to the wall.

The guide with the beam “rolls” onto the rollers on the door

Add 7-10 mm to the resulting mark - the doors should hang and not shuffle along the floor. 7 mm — minimum clearance, which is sufficient if there are no obstacles in the opening floor coverings. If they are planned (later to lay laminate, carpet, linoleum, etc.), then the thickness of these coverings must also be taken into account.

To prevent the canvas from “walking” during installation, it is wedged with small wooden wedges. At least two stops are required - near both rollers.

Having placed the beam against the wall and adjusted its position using a level, we mark its position with a pencil. If the wall allows, you can fasten it to the wall through and through, but for this you need to use self-tapping screws at least 120 mm long, or better yet, place it on anchor bolts.

If the wall, for example, is concrete, the installation of dowels is required. To do this, you need to transfer the marks for the fasteners to the wall. This can be done using a thin and long drill, the diameter of which is smaller than the drilled hole.

An even simpler option: a long thin nail. It is inserted into the hole and a mark is made on the wall with a couple of blows. The following procedure is known: drill holes for the dowel plugs, insert the plugs, hammering them in if necessary. Then we install the doors.

Attaching sliding doors to the wall

Stoppers must be secured along the edges of the guide. They are inserted from the sides, the required location is established experimentally (so that the canvas covers the opening completely when closed, and rolls back sufficiently when opening. They are fixed using clamping screws.

Having opened the doors, we install the flag roller on the floor. It fits into a groove cut into the bottom of the blade. It is necessary to ensure that the doors do not deviate vertically.

First, we insert it into the groove, mark holes for fasteners, drill, then secure with short self-tapping screws (length about 15-20 mm).

At this point we can assume that the sliding doors have been installed. They are already fully functional. Remained Finishing work. Mounting beam with guide is closed decorative overlay, matched to the tone of the door leaf. It can be nailed directly to the timber with finishing nails.

Only when you put it out, make sure that the wheels are closed. It’s much more beautiful this way)) Now that’s it, you’ve installed the sliding doors with your own hands.

A video tutorial on how to install such a door is shown below. There are several installation options.

We install cassette-type sliding doors (in a pencil case)

The process of installing the guide and hanging the door leaf is almost identical to those described above. There is no need only for finishing, but all other stages are necessary. Instead of editing decorative strip, a false wall is mounted at a distance of at least 10 cm from the wall. It is usually made from plasterboard profiles that are sheathed wall plasterboard. But this is not important - you can use gypsum fiber board or plywood, or any other suitable material.

Where does the distance of 10 cm come from? The thickness of the door leaf and the gaps on both sides are 5 cm. At least another 5 cm is added to this for installation of the profile. So it turns out to be 10 cm.

Since the main load will fall on the wall, the frame made of profiles need not be reinforced. If such a wall does not seem very reliable to you, you can insert wooden blocks inside, which are screwed with self-tapping screws. This will make the structure very rigid.

The basic principles for calculating a pencil case for a sliding door, as well as marking features and principles for preparing a doorway for installation, see the video.

Homemade sliding doors

Any door leaf can be installed on rollers and will work as a sliding door. The guide and all other components - rollers (carrying and flag), stoppers, stops - can be purchased. Hang on them at least a piece of plywood or a door assembled from several boards. This will be the simplest and cheap option. But making the mechanism yourself is a more difficult task. One of the options for a sliding door mechanism made from scrap materials (from round pipes different diameters) in the video. The system was supposed to be installed in a closet, but, judging by designs, easy can even withstand a solid oak door.

One of the compelling advantages that speak in favor of installing sliding interior doors is their quick and relatively simple installation - it’s all about the absence of hinges, a difficult door frame to assemble and no less troublesome installation. In general, if you understand sliding doors thoroughly, you can identify a lot of advantages that make them preferable. In this article, together with the website, we will deal with the question of how to make sliding doors with your own hands and talk about how easily and simply old swing systems can be converted into more convenient sliding ones.

DIY sliding doors: let's go shopping

In principle, this is already quite enough to convert an old swing door into a sliding door. But, as they say, everything needs to be done thoroughly and it is not at all necessary to stop there. You should also think about a new door frame (it will require a rail, the width of which corresponds to the thickness of the partition in the doorway - it needs 5 m), platbands, a strip covering the sliding door system and a stop strip if we are talking about lockable sliding interior doors . And, of course, a brand new door leaf will come in handy - only in this case will you be able to make a beautiful doorway.

You can select and purchase everything you need both on the market and in large construction stores. The price of the issue is not that high - at least less than the cost of similar swing doors.

How to make sliding doors: preparing the canvas

To prepare the door leaf of a sliding door, you will need either a hand router or an angle grinder with a drill, hammer and chisel. What you will work with is, of course, up to you, but I will add that with a hand router all work is done more accurately and, most importantly, more accurately. If we imagine the process of preparing the canvas for the installation of sliding doors point by point, it will look like this.

The work with the canvas is completed, now we move on to the sliding mechanism and installation of sliding doors.

Door installation: installation of the sliding mechanism and connecting it to the door leaf

The edge of the guide should protrude 50mm from one side of the opening. On the other side of the opening (the one into which the canvas will open), the profile should extend exactly to the width of the canvas. This point needs to be calculated and the door guide trimmed if necessary.
Installation height of the sliding mechanism - calculations are also needed here. This installation size consists of two components - the height of the door leaf including the rollers and the gap under the door, which is 10-20mm (depending on the curvature of the floor).
The installation itself, or rather the distance of the guide from the wall. Here again, everything depends on the curvature of the walls - if they are smooth, then the guide, without any additions, is attached directly to the wall through pre-drilled holes in it. If the wall is curved, then you may need to move the guide some distance away from it - in this case, first attach a wooden strip to the wall, and only then fix the guide on it.

You can clearly see the process of installing a sliding door in this video.

The door leaf is installed on the guide quite simply - the rollers are inserted into it from the side. After the door takes the required position, you will need to attach a stop to the floor, for which we selected a long groove from the bottom of the door leaf. We open the door as much as possible so that they don’t fly out, inside the guide we first attach a rubber cushion, which acts as a limiter, using a metal screw, and then we insert the stop halfway into the lower groove of the door leaf and fasten it to the floor with dowels on one side. Now we move the canvas towards the closing side, select its desired position and again fasten the upper travel stop of the canvas again, and then finally fix the floor stop with two more dowels.

Installation of sliding doors diagram

In conclusion, I will say a few words about the design of the opening itself - without this stage of work, the installation of sliding doors will be incomplete. From a lath 10-20 mm thick and a width corresponding to the thickness of the wall, some kind of slab is twisted, which is mounted in the opening using polyurethane foam. When the polyurethane sealant has dried, platbands are installed on both sides of the box. If you plan to install a door with a lock, then instead of one of the platbands, a thrust beam with a groove for the door leaf is installed. The counter part of the lock is also mounted in the same thrust block.

That's all. All that remains to be added is that the opening itself can be designed in different ways, and a wooden slat is not a panacea. For example, laminate looks quite good in this place (it is also mounted on foam), and harmoniously selected natural stone or ordinary tiles also look quite good. In general, there is a lot to think about here, and the choice of materials for decorating the opening depends solely on your preferences.

Reading time ≈ 3 minutes

IN Lately The trend of installing sliding doors at home is becoming increasingly popular. They are preferred to ordinary doors for a reason. In fact sliding structures have a number of advantages, some of them: they open conveniently without squeaking or other noise, are not traumatic, simple and inexpensive.

Sometimes the main advantages include the fact that they allow you to save precious space in the room - well, one cannot but agree with this. Next we will talk about how to install sliding doors with your own hands, the material will be arranged as step-by-step instruction to installation.

One thing to note important point. If you have irrevocably decided to install sliding doors yourself (videos and photos of an auxiliary nature can be found directly on this page), then remember that such work is best entrusted to professional staff, since only a masterful approach can provide highest level installation, and therefore guarantee long and trouble-free operation of door components. The conversation about how to make a sliding door with your own hands is very complicated, so it is highly recommended to buy a ready-made kit.

Step-by-step instructions for installing sliding doors

You need to imagine the moment that door block delivered to the apartment where it will be installed in the future, disassembled. He gathers on the spot. The door leaf, frame and trim are packaged to avoid damage during transportation.

Let's consider the installation method when the door leaf has freedom of movement along doorway. Here it is necessary to note the main possible options finishing the doorway: these are tiles, a decorative false frame and, the simplest thing, regular wallpaper. Let's not stop at finishing with tiles or wallpaper, but let's turn Special attention on how to install a sliding door with your own hands using a false frame.

The false box is installed in a pre-prepared doorway and is fixed with special wedges. To properly control the current installation, it is necessary to use a level and plumb line.

An important point: rollers, which are the main components, are attached to the upper end of the door leaf sliding system. A screwdriver is used for this. The holes are marked with a pencil.

There are special mounts for the rollers, which, like the first ones, come complete with the entire structure. Most often, a mortise handle is installed - this will make opening the door more convenient.

The most important point is when the rollers with the web are mounted in the guide. The blade is adjusted by level using the same pegs.

We must not forget that a special groove must be cut in the lower end of the door leaf for the flag roller, which, in turn, is designed to protect the door from lateral vibrations.

This roller is attached, of course, directly to the floor. To fill any gaps, it is used polyurethane foam, which serves as a good fixative.

We can conclude that assembling sliding doors with your own hands is not an easy task, requiring certain skills and availability necessary tools. It is recommended to entrust the assembly to professional workers.