Sliding gates with automatic control is convenient. No need to get out of the car in the rain and snow, no need to waste time and effort pulling the rusted sash. He opened the window, pressed the button on the remote control - let's go. The only problem is it's expensive. However, not always.
Alutech is known primarily as a manufacturer of automatic gates, automatic roller shutters and other high-tech products made of aluminum profiles. Among other things, in its nomenclature there are recoil automatic gates ADS400. Let's talk about them.
Design
The main element of the gate - leaf - is a frame made of aluminum profiles, on which the infill is fixed. Filling can be different - from cheap plywood to rather expensive sandwich panels. The canvas moves with the help of roller bearings, which are installed on the foundation. Of course, there is an electric drive and automatic control. In addition, if necessary, the gate can be easily rolled away manually. V in general terms- all. The details remain.
Fill Options
Allegedly more than 20. In fact, the main 3:
- sandwich panels;
- extruded aluminum profiles;
- roller rolling profiles.
All these profiles may differ in color, width and height. In addition, at the request of the client, Alutech can fix even a sheet on the frame. It is not clear who needs it - the cost finished construction will change slightly.
Sandwich panels
The thickness of the sandwich panels is 45 mm. Inside there is foamed polyurethane with a density of approximately 46 kg / m. This is a good heat insulator, but in this case its other function is important - increasing the rigidity and strength of the panel.
All gaps between the individual lamellas are closed with EPDM seals, and between the glazing bead and the sandwich panel there is an FRK12 seal. Also a trifle, but such trifles demonstrate an attitude to quality. It is for this that Alutech gates are valued.
Roll Rolling Aluminum Profiles
The profiles are made of aluminum tape, inside - polyurethane foam for rigidity and geometric stability. The profiles are coated with polyurethane-modified polyamide paint. Polyurethane makes the coating flexible and resistant to temperature changes, and polyamide increases wear resistance. According to the manufacturer, the quality of the coating is confirmed by the test reports of BASF Coating (Germany) and AkzoNobel (Sweden).
Aluminum extruded profiles
Alutech offers profiles with a thickness of 37, 82 and 87 mm. It is not necessary to use profiles of the same type - you can use elements of different lengths, thicknesses and colors to get the desired door design.
Gate
In addition to the gate itself, Alutech also offers a gate that can be installed next to them. This is a good option if you often get in and out on foot - it's both faster and the mechanism wears out more slowly.
The gate can be:
- built-in with opening to the street;
- built-in with opening to the yard;
- bill of lading with opening into the yard.
Hinges can be hung on the left or right.
Wicket design
- The frame elements are made of aluminum profile - it is lighter than steel and is not subject to corrosion.
- To fill the canvas can use sandwich panels, aluminum profile different types or any sheet material.
- The package includes fittings, including a handle. At a minimum, the hinges are of very high quality - they are made by the Italian company Fapim.
- Filling elements are fixed with hidden fasteners.
- There is an additional groove in the gate strike plate. It can be equipped with an electric latch (sold separately).
Advantages of sliding gates Alutech ADS400
Frame made of aluminum profiles with polymer coating
Aluminum alloy does not rust, weighs less than steel and at the same time is practically not inferior to it in strength. According to the company itself, its alloy was tested at the "Institute of Powder Metallurgy" (certificate No. BY/112/02/1/0/0263) and found to be of high quality.
Rigid frame
The companies did not spare the metal - the bearing capacity and rigidity of the frame are at a height. This will definitely come in handy during strong winds.
Great resource
The resource of the main elements of sliding gates ADS400 is 25,000 operating cycles. Based on 4 cycles per day (rarely more in a residential building), the gate is guaranteed to last 15 years. At production sites, their resource will be used up faster. However, for sure they will not turn into powder - most likely, it will be necessary to simply replace the rollers.
Silent operation
The gate rollers are made of glass-filled polyurethane (a mixture of polyurethane resins with glass fiber), and the toothed rack is made of nylon. The polymer parts of the sliding mechanism produce less noise and therefore the gate does not work completely silently, but rather quietly.
Hidden fasteners
A length without protruding heads looks more attractive. A trifle, but nice.
maintainability
Any element of the gate can be replaced quite quickly and with a minimum of dismantling. Of course, to replace the elements of the frame will have to sweat, but I can not imagine what could be broken in it.
Additional accessories
The standard delivery set of Alutech ADS 400 doors does not include:
- support frame for concreting;
- supporting pole with a brace;
- toothed rack.
Disadvantages of Alutech ADS400 gates
There are no significant disadvantages of sliding gates ADS400. The only problem is the price: as always with big brands, it bites. So, the minimum price that can be calculated on the calculator is 990 euros - and this was the price of a sliding gate only 2 meters wide and 1.2 high without installation and automation. As filling, we took the cheapest aluminum profile. V real life the price of the Alutech ADS 400 gate will hardly be less than 1500 euros. However, the guarantee of quality is also worth something.
Technological progress is moving forward by leaps and bounds. The human consciousness also quickly adapts to changes. So, if earlier the entrance gate was a luxury item - not every average family living outside the city could afford such an acquisition - today homeowners around the world appreciate the undeniable advantages of using such structures. One of these is the sliding and swing gates of the ADS400 series from ALUTECH: an exclusive offer on the market of entry structures in the CIS.
Modern ALUTECH entrance gates are gradually replacing obsolete welded steel structures from the market and are becoming an increasingly popular choice of homeowners. First of all, this is due to their advantages: they have a modern and high-quality design, are easy and quick to install, and are also silent and easy to use.
Pushing the stereotypes
Sliding gates ALUTECH - perfect solution when you need to save space before personal plot: they open, moving along the fence, thereby perfectly compensating for the lack of space.
Sliding gates ALUTECH
Swing gates ALUTECH
The average price for such gates is about 1100* euros. At the same time, they will serve you for at least 15 years. Having resorted to simple arithmetic, we get only 6 euros per month. Adding to them a number of acquired advantages in terms of functionality, convenient and safe operation, original and bright design, it becomes obvious: how little quality and beauty cost in their physical embodiment!
If there are certain obstacles for the movement of the gate along the fence (for example, bushes or trees are planted close to the perimeter of the fence) and free space allows, then it is better to opt for a functional swing series. Such gates also have a number of design advantages.
- the promotional price is indicated for the gate (4000 × 2000) mm in the basic configuration, excluding installation. Please check with the regional representatives of ALUTECH about the conditions and period of the action.
My own constructor
The design of ALUTECH entrance gates can provide for a variety of filling options - today more than 20 types of leaf and wicket filling are available for order. So, sliding and swing gates ADS400 can be made of:
- sandwich panels (available for order in 5 canvas patterns, 3 woodgrain colors),
- roller-rolled profiles (available in 10 standard colors and 3 woodgrain shades),
- extruded profile (available in 7 standard colors).
At the request of the client and in order to save money, entrance gates can also be made of more economical material - profiled sheet, wooden board or any other sheet material.
Sliding gates ALUTECH filled with sandwich panels
Thus, the entrance gate will harmoniously fit into any, even the most pretentious, exterior.
Investing in durability
ALUTECH entrance gates are aimed at long-term and reliable operation. Hidden fastening of structural elements allows you to protect the gate from unauthorized access. The use of roller bearings with rollers made of glass-filled polyamide and nylon slats ensures smooth and silent movement of the gate. Additional protection from sagging sashes during operation swing gate and gates guarantee three-section overhead loops.
All doors of the ADS400 series are equipped with high-quality fittings, which makes these designs even more durable and easy to use.
Will not rust behind us
ALUTECH entrance gates are resistant to corrosion, mechanical stress, cracking and scratching. This is achieved through the application of high-quality paintwork on the door panel, as well as a wear-resistant polymer coating on the frame profiles. Thus, the ADS400 entrance gate with infill of sandwich panels or aluminum profiles retain bright color even after prolonged exposure to sunlight or operation in regions with high humidity.
Gates that are easy to install and low maintenance
Entrance gates of the ADS400 series are delivered already maximally prepared for installation - in the configuration of the required size and with holes prepared for assembly. In view of what their installation will take quite a bit of time - no more than 4-5 hours. The modern design makes maintenance of ALUTECH doors simple and convenient: if damage is repaired, components can be easily replaced with new ones.
So, having paid for these designs once, you long years forget about discomfort and possible problems when servicing them.
And a few more words about the pleasant ...
Gates can be equipped with both manual opening and automatic: it all depends on the client's wishes for convenience and the planned frequency of using the car for exit and entry. You can also install a gate in the gate - an additional entrance will extend the life of the structures. By the way, its execution can be chosen in the same style with the design of the gate itself.
Well - do you still think that gates are expensive? Think again, because your comfort is worth much more! And on themselves (and in this vein - on their calmness and convenience), as they say, they do not save.
You can get more detailed information about the products on our website or by contacting our.
Sliding gates Alutech- it robust construction a new generation, a guarantee of the safety of your family and property, an affordable solution for a private home:
- Package options for every taste and budget: from economical solutions to premium segment offers.
- Attractive appearance no visible fasteners.
- All-aluminum construction resists corrosion.
- The price fully justifies the exceptional quality.
- The minimum service life is 15 years.
Product Benefits
Sliding gates of the ADS400 series are an improved impeccable design of self-supporting gates that meets the most demanding requirements of the customer.
- All components - from profiles to filling materials - are produced at the company's factories. Alutech is responsible for the quality of all components and elements, confirming their reliability and safety at the modern level
- There are more than 20 door leaf seal options to choose from:
- solid/sparse aluminum profile,
- sandwich panels 45 mm thick,
- roller shutter profile AG/77,
- corrugated board / corrugated board,
- wooden panels.
- Structural strength is achieved by combining the frame profile with a universal aluminum tire profile with a size of 96x177 mm.
- The minimum resource for closing / opening the gate - 25 thousand cycles. If we take into account that the gate will be operated daily for approximately 4 times a day, such a resource corresponds to 15 years of trouble-free operation. In the event that the gate still requires repair, it can be carried out with minimal financial and labor costs: a lot of damage or a change of filler can be done repair without resorting to dismantling the structure.
- Compared to many other manufacturers, the Alutech ADS400 series doors operate almost silently, which is ensured by polyamide rollers and a nylon rack.
- High stability to corrosion are achieved due to the fact that all structural elements are made of aluminum profile, applied polymer coating
- The absence of visible fasteners complicates access to your territory for uninvited guests and makes the appearance of the gate more attractive aesthetically.
- The color of the finished gate can be either classic (white, blue, green, red, brown, dark brown, beige), or unusual: for example, silver, or a shade of "golden oak", which imitates wood flooring, or colors "dark oak", "cherry".
Standard color range
Wood colors
- High-quality automatic sliding gates can be supplemented with photocells that will be triggered when an obstacle occurs, stopping the closing of the gate. Security guarantee.
Sliding gate design
Alutech sliding gates of the ADS400 series are self-supporting structures in which the aluminum gate frame with infill moves along roller bearings installed on the foundation outside the passage area (behind the gate opening).
- opening post
- Fence
- canvas
- Upper catcher
- Bottom catcher
- mounting bracket
- Base frame
- Retaining pole with rollers
- Additional pole with rollers
- brace
- Engine
- Bolt
It should be remembered that correct installation allows you to easily, manually, open and close self-supporting sliding gate Alutech.
For locking, a deadbolt is used, which is included in the basic package.
Additional equipment
The package of sliding gates "Alutech" may additionally include:
- base frame for concreting,
- support post and brace,
- rack.
Sliding gate filling types
Sandwich panels
Roller Roll Profiles
Aluminum extruded profiles in various widths
We offer various options sandwich panel patterns, thanks to which sliding gates will be ideally combined with any finishing material. Connoisseurs natural materials we offer sandwich panels imitating cherry wood, dark or golden oak.
Aluminum profile, different widths and colors, allows you to embody different color schemes in the finished design of sliding gates - from classic white and brown to original colors: ruby red, moss green, metallic silver, golden oak and many more. 
The aluminum frame of sliding gates, including gates, allows the installation of a profiled sheet into the structure, wooden board or any other sheet material.
Sliding gate automation ADS400
Automation systems allow you to comfortably control the opening and closing of the door leaf by means of an electric drive, which is put into operation from the remote control.
For greater safety of the passage of people, pets, and cars, we can equip the sliding gate structure with special photocells that will control the entire process, stopping the gate from closing if an obstacle appears in the passage.
We carry out a complete set of sliding gates Alutech automatic two trademarks: AN-Motors and Comunello. As well as other manufacturers.
Automation for gates under the brand name AN-Motors has a number of advantages, the main of which are:
- high reliability of mechanisms;
- optimal configuration - the kit contains all the necessary elements for installation and configuration;
- convenient and easy connection;
- wide functionality automation of the system according to your wishes;
- safety during operation;
- self-locking gearbox prevents unauthorized opening of the gate;
- EMI filter protects the drive from high-voltage impulse noise, ensures compliance with EMC standards;
- convenient operation in the absence of power supply;
- affordable price.
Roller shutters are the perfect protection for windows and doorways shops and offices located on the lower floors of buildings, windows living quarters. Roller shutters reliably protect objects from unwanted penetration at night or on weekends, and provide additional sound insulation in apartments. V summer period protective roller shutters effectively protect the premises from heat, reduce the cost of electricity used to operate air conditioners and fans. Anti-vandal versions of roller shutters have increased burglary resistance.
Structurally, metal roller shutters are made of aluminum slats. It slides along the guides and rolls up. The roller, on which the web is wound, is located at the top of the opening and is closed with a protective box. Roller shutters are operated automatically or mechanically. Mechanics options: use of crank, cord inertial drive or built-in spring-inertial mechanism. Automation is more convenient and is used more often. It allows you to simultaneously control roller shutters in several window openings, set the program to open or close the roller shutters. For emergencies the possibility of manual control remains.
The lamellas that make up the canvas are made in two ways. Roller rolling provides a small wall thickness of the profile. In the manufacture of roller shutters, the profile is filled with hard or soft foam, which provides the structure with lightness, strength, and heat-insulating properties. Protective structures with roller-rolled lamellas are used for installation on the upper floors of multi-apartment or country houses, for zoning warehouse premises. The profile obtained by extrusion (punching) has internal ribs that increase the rigidity and burglary resistance of the web. The extruded profile is used to protect the openings of the first floors, put in shop windows.
The structures are quite aesthetically pleasing. right choice the colors they serve good element decor and decoration of the facade of the building. Color solutions roller shutter coatings are matched to the color of the frames or to the architectural appearance of the facades of buildings. Thanks to the use of frost-resistant, UV-resistant paint, the appearance metal structures long time remains unchanged.
How to choose Garage Doors?
Garage doors must meet two requirements - strength and reliability. This is necessary to ensure the safety of vehicles. Gates are considered as a barrier for criminal elements that encroach on other people's property. Sturdy sashes and the massiveness of the locking device have until recently been the main deterrent. There was no alternative garage doors swing type. The situation has changed dramatically. There was an opportunity to choose among various modifications of the gate. All have both advantages and disadvantages.
Consumers make a choice based on financial capabilities and focusing on the reliability declared by the manufacturer. The most demanded are the following types gate: sectional and rolled.
Sectional doors
This is also a popular option. The gates are equipped with an electric drive with a complex of sensors that control security and remote control. Sensors stop the door leaf when there is an obstacle in front of it. It is possible to open the sash manually. Gates are affordable and available in a variety of finishes. There is no need for free space in front of the garage. On the high level garage waterproofing is provided.
Sectional doors fit in opening widths up to 6 m and heights up to 5 m. They do not require the installation of a locking device. Reliability of closing is controlled by automation. This design expands the range of its application. It is often found both in private garages and in warehouse and industrial areas. Decoration Materials make it possible to fit the gate into the framework of any concept of a garage building, residential or industrial building.
roller shutters
This type of gate resembles roller shutters. The advantage of the design is maneuverability and compactness. Others important characteristics on the Middle level. This applies to sound absorption, strength and heat insulation. Technical failures are possible. Preference is given to such gates where the threat of unauthorized entry is absent or minimal.
Roller shutters are ideal protection for windows and doorways of shops and offices located on the lower floors of buildings, windows of residential premises. Roller shutters reliably protect objects from unwanted penetration at night or on weekends, and provide additional sound insulation in apartments. In the summer, protective roller shutters effectively protect the premises from heat, reduce the cost of electricity used to operate air conditioners and fans. Anti-vandal versions of roller shutters have increased burglary resistance.
Structurally, metal roller shutters are made of aluminum slats. It slides along the guides and rolls up. The roller, on which the web is wound, is located at the top of the opening and is closed with a protective box. Roller shutters are operated automatically or mechanically. Mechanics options: use of crank, cord inertial drive or built-in spring-inertial mechanism. Automation is more convenient and is used more often. It allows you to simultaneously control roller shutters in several window openings, set the program to open or close the roller shutters. For emergency situations, the possibility of manual control remains.
The lamellas that make up the canvas are made in two ways. Roller rolling provides a small wall thickness of the profile. In the manufacture of roller shutters, the profile is filled with hard or soft foam, which provides the structure with lightness, strength, and heat-insulating properties. Protective structures with roller-rolled lamellas are used for installation on the upper floors of apartment or country houses, for zoning warehouses. The profile obtained by extrusion (punching) has internal ribs that increase the rigidity and burglary resistance of the web. The extruded profile is used to protect the openings of the first floors, put in shop windows.
The structures look quite aesthetically pleasing; with the right choice of color, they serve as a good element of decor and decoration of the facade of the building. The color schemes of the roller shutter coverings are matched to the color of the frames or to the architectural appearance of the facades of buildings. Thanks to the use of frost-resistant, UV-resistant paint, the appearance of metal structures remains unchanged for a long time.
How to choose Garage Doors?
Garage doors must meet two requirements - strength and reliability. This is necessary to ensure the safety of vehicles. Gates are considered as a barrier for criminal elements that encroach on other people's property. Sturdy sashes and the massiveness of the locking device have until recently been the main deterrent. There was no alternative to swing type garage doors. The situation has changed dramatically. There was an opportunity to choose among various modifications of the gate. All have both advantages and disadvantages.
Consumers make a choice based on financial capabilities and focusing on the reliability declared by the manufacturer. The following types of gates are most in demand: sectional and rolling.
Sectional doors
This is also a popular option. The gates are equipped with an electric drive with a complex of sensors that control security and remote control. Sensors stop the door leaf when there is an obstacle in front of it. It is possible to open the sash manually. Gates are affordable and available in a variety of finishes. There is no need for free space in front of the garage. Garage waterproofing is provided at a high level.
Sectional doors fit in opening widths up to 6 m and heights up to 5 m. They do not require the installation of a locking device. Reliability of closing is controlled by automation. This design expands the range of its application. It is often found both in private garages and in warehouse and industrial areas. Finishing materials allow you to fit the gate into the framework of any concept of a garage building, residential or industrial building.
roller shutters
This type of gate resembles roller shutters. The advantage of the design is maneuverability and compactness. Other important characteristics are average. This applies to sound absorption, strength and heat insulation. Technical failures are possible. Preference is given to such gates where the threat of unauthorized entry is absent or minimal.