The shelf under shoes is the necessary attribute of the hallway, because thanks to it the space is released, and the room looks neat. Lubrica is not difficult to buy in the store, but a small simple design is expensive. If there is a desire and fantasy, then figure out how to make a shelf for shoes with your own hands, just. Material homemade Master Laminate, boards, plywood, pipes, cardboard will serve wooden bars. Showing fantasy and skill, you can make furniture that you will not find in the store.

From PVC pipes

Easy in the manufacture of a shelf of PVC pipe segments will surprise wealth decorative opportunities. For its manufacture, you will need:

• sewage pipe PVC diameter 300 mm;
• sandpaper;
• glue wallpaper and epoxy;
• washing wallpaper.

The length of the plastic tube is 3 m, so it must be cut into 10 parts of 30 cm, because such a length will be every shelf compartment. You can cut the material by a jigsaw or grinder. Every detail must be carefully treated with sandpaper to remove roughness and make the surface of the ends as smooth as possible.

For the design of the workpiece, you will need a roll of wallpaper - drawing and color choose to your taste. The shelf for shoes is located at the door, so in bad weather, it can be stained, so it is better to get it with washing wallpaper, which are easily cleaned. Each part is covered outside and set down to dry. Finished segments are collected in a single design. It will consist of three elements at the base and from above, and four segments in the middle.

First glued down horizontal strips, And after drying epoxy glue, the details are pasted on each other. It turns out an interesting and original shelf, requiring a minimum of the cost of materials, and which can be easily assembled.

From cardboard

Cheap and lightweight design for summer shoes and slippers will be made from cardboard. Any boxes from household appliances. To make an unusual shelf in the hallway, prepare simple items:

• scissors;
• scotch;
• stapler;
• rule and pencil.

A few rectangles are placed on a sheet of cardboard, the width is 25-30 cm, and the length is taken to the entire sheet. The number of billets depends on your desire - each of these pockets for one pair of shoes. Cut rectangles are divided into three equal parts. Two sidelines bend in the form of a triangle and fasten with a strip of a scotch or stapler. Having made from all billets of pockets, they are partially investing in each other and fasten into the tape. Such a design is hanging on the wall, so it will be relevant in the country or in the interior rustic style. To give a more attractive appearance, the product can be saved with colored paper or self-adhesive film. This simple and fascinating work can be performed with children.

Wooden

Beautiful shelf can be made at home. It will have to be tinted longer than with cardboard, and the cost of material is higher, but the result is worth it. The shelf will be round, of wood, with two tiers and separation crossbars. For work it is necessary:

• 4 sheets of wood with a thickness of 15 mm;
• screws;
• paint;
• caps on fasteners;
• lobzik;
• drill;
• grinder machine.

Note! Number and size supplies Depends on the material used by the material and the magnitude of the shelf, but, as a rule, consumption is small.

From three sheets cut out round blanks For top, middle and bottom shelves. The diameter of circles is 600 mm, they are painted using simple adaptation. A nail is clogged into the center, a cord is attached to it with a length of 300 mm with a pencil at the end. Cut the blanks with electric jigsaw. For dividing crossbars, which 4 pieces will be attached on each tier, 8 identical parts of 160 per 200 mm are cut out. The edges of all billets are carefully processed by grinders.

On the smooth surface of the parts, marking places of fastening of separation parts are made. Marking is applied to the upper surface of the lower circle, the middle circle is placed on both sides, and the top with inner. At the attachment points, the holes are performed with a diameter of 2 mm, the same marks are drilled on separation parts.

Assembly

According to the intended lines, 4 planks are screwed to the lower circle, each will need 2 screws. The central circle is attached to the separating elements, and the holes under fastening of the upper separation parts are drilled between the secrets of the fasteners. These planks will be located above and located between the lower elements. They will also connect two circles - central and top. The shelf is assembled, it remains to paint it and close the caps of screwing the screws. A comfortable and spacious shelf will become an excellent addition to the interior of the hallway.

Each thing made with your own hands carries not only a practical function, it fills the house with a special comfort, because it is made with love and especially for this place.

Video

See how an old cabinet can be made of a good shoe shelf:

Date: 07.21.2016

Acquaintance Guest with an apartment begins with an entrance hall. Therefore, the owners try to make this room more cozy. Often, the hallway is a small room where it is necessary to compact a lot of clothes and shoes. Here to help the owners comes gaipenitsa for shoes, which perfectly fit even in Little parishion. The main thing is that it be the right size, selected on the basis of the square of the room, the number of people living and coming to visit people. Properly chosen galoshes helps to keep the space and save appearance Shoes, protecting against dust, light and deformation.

Shoe storage galoshnitsa is very necessary, so as not to put the dirt into the house

History of the appearance of galosh and galoshnitz

There are two theories of the origin of the galosh.

According to the first version, rubber shoes called galoshes, invented Indians, to protect the legs on the rain. Subsequently, they invented the stand for protection and storage galoshes.

Galosh great shoe option during rain

The second version of the appearance of rubber protective boots states that this product is invented by the Englishman who want to protect dear leather shoes From dirt. When the invention gained popularity, cabinets and racks began to appear for compact placement and storage galleos.

Wooden galoshes with shelves for each shoe

Many are interested, how to pronounce, galoshes or caloshs? It turns out that in Russian are allowed and considered the right words.

What should I consider buying a galoshnitz?

In order for the purchased galoshes to become a reliable assistant in the difficult storage of shoes and perfectly complemented the interior of the hallway, it is necessary to determine the color and size before purchased. And it is better to do it at home, then when buying, it will not guess this wardrobe in that corner. And with the appearance, it is decided on the store, considering the huge range of the proposed galoshnitz.

Several general tips that need to take note before buying a galoshnya

1. If the hallway is dark, then the shoes light tones Make the room brighter and add light.
2. For a large family, it is better to look for a spacious shoe storage device. If you choose the galoshnitsa inappropriate sizes, then it will take place and shoes will have no place to place.
3. IN long parishion It is better to choose a narrow shoe wardrobe, and the storage space is increased by height. It must be fixed to the wall, and then the severity of the folded shoe will exceed.
4. For small premises You can consider the option of acquiring the cabinets or wheels with wheels to make it easily move, freeing the place to pass.
5. If the size of the hallway does not allow you to place big cupboard for the whole family, then it is better to buy a bedside table large sizes And use it for storing shoes for the season, and the remaining shoes are removed to another place.

For big seven, it is better to purchase a large galoshnitsa

Tip: if old, torn, unnecessary, spat shoes, which is stored just in case, dispose of, then much more free space appear in the shoe drawer.

What material is suitable from what material?

Choosing a foothold for shoes, the first thing to evaluate the material from which it is made. The easier and more practical, the galoshnitsa, the longer it will last and the easier it is to keep it clean.

• Gaipenitsa from chipboard is the most inexpensive option. The product is made material light, does not take up much space. Perfect option For a small hallway. The only minus - chipboard with wetting can crack and lose appearance.
• Stand out natural tree Suitable for a spacious hallway. Wooden shoes are massive and durable. Such an interior will add luxury room. But the tree has large disadvantage - It absorbs moisture, so it will have to keep dry shoes on a wooden shelf or process the surface with a special composition to protect against moisture.
• Plastic galoshing is the most inexpensive version of the shoe stand. It is practical, does not absorb moisture and is easily clean. The only minus of plastic is fragility.
• Stand for shoes of glass. Original, beautiful solution For hallway, but absolutely not practical. The glass will have often washed and polished to preserve its shine and an attractive appearance. The galoshnya from thin glass will be fragile, and from thick - massive and difficult to shift.

• Metal shutders will last long, but it will have to be periodically painted, to protect the metal from corrosion and rust. And if the sheet of which is made with a slim shoe locker, it is easy to deform.
• Wicker galoshnitsa will be an excellent decoration of any entrance hall. It is easy enough, provides good ventilation, which favorably affects the storage of shoes.
• Gamenitsa from stone and bricks. Dear kind of shoe stand. It is rare enough. Suitable for large parishings. Very massive. Brick galoshnitsy are used where the interior of the room allows, for example, next to the brick wall or as a continuation of the brick protrusion. Brick shoes are not sold in the store, they are usually postponed to manual to order.

Metal galoshes is very durable

Varieties of galoshnitz for shoes in the hallway

In furniture stores, you can choose a galoshnitsa for every taste, taking into account preferences and wishes.

Tip: If the store failed to choose the galoshnitsa of the desired size, then you can make an order. Made by the standards and preferences of the customer, it perfectly fit into the interior and will not clutter the space.

Fixtures for storing shoes are produced in the form of chest of drawers, cabinets, penalties, tumb, boxes, suspended structures.

Suspended cutters save space

What types of galoshnitz are most convenient?

• Cupboard. Someone may seem strange to store shoes in the closet, but if the family is big, then this is the most suitable solution in this case. Winter high boots and roller skates will easily fit into the closet, and not just sneakers and sandals shoes. Although this storage system has a number of minuses, it is quite cumbersome, it is not suitable for a small hallway, and get shoes from the upper shelves is quite difficult.
• Chest of drawers. Storage of shoes in the dresser is quite problematic. With all the impregnancy, a lot of shoes, shoes and boots will not fit into it, but it will take plenty of place in the hallway. In addition, in a small room, the chest will be simply not appropriate.
• Pencil case. Folding the shoes into the penalty is of course convenient, but if you look from the point of view of aestheticism, then shoes, with long-term storage, dreamed, and such a design will not be able to hide old favorite shoes or stop-tap slippers. It is more suitable for temporary storage of seasonal shoes. And for a long time it is better to lay shoes not in open video, and in boxes.
• Shelf. Comfortable, easy, does not take much space, suitable for a small hallway, a small family and for storing summer shoes.

Gaipenitsa for shoes can be high as a locker

Wooden galoshes with a seat very convenient to wear shoes

Gaipenitsa - a shelf can be very easy in design

• Cubs and small boxes. Very comfortable, but folded in them a lot of boots and boots will not work. The cabinets are suitable for use as seats on which it is convenient to shift.
• Suspended structures.Such devices are usually attached to the wall or doors, compact, take up little space, are suitable for storing light summer shoes. It is worth noting that the slippers awesome on the wall are not suitable for each interior.
• Shelves. The shealing shoe storage system is more appropriate for the dressing room than for the hallway, because the shoes are placed on the shelves will resemble racks in the store, depriving the room homemade utya. If the shelves are one or two, they will look nicely under the outerwear hanger.

How to make a galoshnyan for shoes with your own hands?

If the store failed to find a dream galoshnitsa, then you can build it out of the remedies. Such original I. beautiful product Fill the house with warmth and comfort. Everything in the house is suitable for making material for the manufacture, the main thing is to connect fantasy, bottle, cardboard, plywood, pipes, leather, foam rubber and boards are suitable.

Galoshnitsa can be made of girlfriend

The galoshnitsa can be made of old fruit boxes

Consider several examples of the manufacturer of the galosterns do it yourself.

• If you hit the cardboard with a triangle and fasten your skot in the form of a slide, then you will get a beautiful and spacious galoshnya. Even a child will cope with this work. This shelf has two minuses:
• For those who own a carving on a tree will not work out to make a carved locker, not inferior to the design of the purchase. Beautifully look in the hallway carved benches with a shoe compartment.
• You can use buckets for storing shoes, paint and place on the shelves or under bench. Also for this purpose will suit old shopping bags.
• Old wooden boxes You can paint, fasten on the wall like shelves and place shoes in them.
• easy enough, easily overturns
• it can be frowning, use the galoshnitsa for dry shoes.
• From the remnants of the pipe and plastic bottles Appeal good places For storage, if they are connected and secured on the wall. Bottles need to pre-cut the necks.
• Also for storing shoes boxes are suitable different sizesMainly beautifully arrange them and accommodate with taste.

Gaipelip Cardboard in the form of triangles

If the family has small childIn the new galoshnitz, you need to take a locker, box or shelf for its shoes. Only to do it in such a place, from which the baby will be able to easily, freely and safely get shoes. You can, together with the baby, arrange the regiment with an inscription or application, and in the process of work, tell the child that the sandals after a walk you need to put here. This will help to teach the baby to order.

The main thing, acquiring the galoshnits, remember that it is needed for convenience, and not for beauty and place in it should be so much enough for the shoes of all family members. Then we can safely say that the desired and useful thing is purchased.

Calley in the hallway

Gaipenitsa for shoes in the hallway51 Photo Idea:

Entering the house or apartment, we first take off the shoes and in the cold season of the year. The placement of the upper clothes never causes problems, but with a footwear, a different situation. Especially such a problem concerns large families, as well as owners of extensive shoe collections.

An ordinary person in the season lays at least two pairs of shoes, and if there are three or more people in the family, then at least 6 pairs of shoes are obtained, or even more. But do not forget about shoes not for the season, which is also stored somewhere. With such a problem as storing shoes most often faced the owners of small apartments and small vessels. The solution of this type of question will be the installation of shoe shelves, and if your budget is small, then in the event you should make a shoe shelf with your own hands. The manufacture of the shelf with their own hands will not only save your budget, but also give your hallway of individuality and exclusivity.

Before choosing a shelf for shoes, it is necessary to calculate how many steam you will be in it. The number of footwear pairs directly depends on the number of members of your family. The main types of shelves for shoes can be attributed to Bona, Slim, coupe, cabinet, as well as Jubia - Gaipenitsa. Slip is a peculiar showcase with doors and air holes, it is practical in use and has a lot of space for storing shoes. Shelves of type Slim - are made directly from wood, it is advisable to put already dried and clean shoes in them in order to not pollute the bottom shelves, it is not very practical and causes some discomfort.

The shoe shelf by type of coupe is very practical, often such shelves are made individually under the width and length of the hallway, so they fit perfectly into any interior. The shelf of the coupe is usually high, but not deep and necessarily with sliding doors (otherwise it will not be a coupe), due to the non-deep wardrobe, the shelves are located under the tilt (which allows you to put shoes on them, high-heeled).

The shoe regiment of the cabinet - often has a compact and small size (only seasonal shoes are placed in it), often there are swollen doors in such a tumble, and the de 2 or 3 horizontal shelves can be placed at the top.

Shoe shelf Gaipenitsa - is the newest invention for storing shoes, it can not only be stored, but also dry shoes, it can be installed not only in the hallways, but also on balconies or storage rooms, it has a view of the cabinet.

Shelf for shoes do it yourself

The shoe shelf can be made of any girlfriend, with a large desire it will not be worse than many expensive shelves sold in stores.

From the most budget option, you can select the shelf made of cardboard boxes that are in every home. For such a shelf, you will need one large or several boxes less than the size. Such a regiment will be relevant in the case of a very small hallway, because it will take a minimum of space. We make the blanks, for this, with the help of a pencil and ruler, we mark rectangles of 30 cm long and width over the entire side of the box. After cutting out future shelves with a special knife or scissors. After we take our workpiece and fold it into three equal parts, after which the side parts should be folded into the triangle. Must get pockets, so we fold all the blanks. After that, the harvested pockets are established by a friend, leaving each other to the shoes between each groove, after everyone thoroughly fasten his scotch. For reliability, all pockets can be fixed with the brackets. The resulting design is recommended to fasten on the closet or the wall in the hallway. Also, such shoe pockets can be painted with different colors, or one desired color, which will give your hallway of bright and unusual paints.

The next type of shelves under shoes, which can be done by the regimental-carousel. Such a shelf can be placed in any standard closet exhibiting in your home. Carousel for shoes will be made of four rotating shelves, necessarily round. Wooden pins in a vertical position will be inserted into the round shelf. The shelves themselves will be attached to the metal rod. For the manufacture of such a shelf you will need tools that have almost every owner at home. We need a cabinet, standard sizes, with a depth and width of 60 cm, and about 190 cm high, we will need 4 disks with a diameter of no more than 55 cm, as well as 9 discs with a diameter of about 10-12 cm. For the holding of the shoes will be We need round pins (022): 18 pieces with a length of 35 cm (1), 24 of the holder of 30 cm (2), 16 pieces of 25 cm (3), as well as 32 holders of 20 cm (4). To support the shelves, a metal pipe will be needed, a diameter of about 40 mm, as well as a height in the entire cabinet.

On one round shelf we should fit 9 adults and 12 children's footwear. It all depends on your desire and fantasy, because it is exactly how you decide how much it is necessary to install holders on one shoe shelf. For greater efficiency, you can make shelves with different number of holders, for example, on 2 shelves can be located 12 pairs (for children's shoes or small in size), and for 2 other 9 pairs of shoes (for large sizes). Such a shelf can be painted in any color, or open lacquer. The surface of the support parts is best not painted, it will give a slight slip of your shelf.

The shoe shelf with their own hands can be made in two ways, this is collected from directly purchased parts, or made itself. Collect the shelf of ready-made elements is quite simple, such kinds of shelves are sold in many stores, it is necessary to simply collect at home according to the instructions provided. It is also possible to collect the shelf of specially made components, but according to your personal design. What to say about the independent manufacture of the shelves, then it is much more complicated, but as it takes much more time and strength, but you will definitely be sure of such a shelf.

For the manufacture of a conventional shelf for shoes, we will need two boards of 85 cm, 6 bars 5 cm long and 3 cm wide (they will perform the role of support for shelves for shoes), as well as 4 70 cm boards (for shelves). Such a shelf can be made in two versions. One is the uniform distribution of 70 cm boards all over the entire height (top 5 cm below from the side walls), so we will have a shelf under shoes with four racks. You can make 3 shelves for shoes, and the upper seat. Moreover, the seat can be made with a soft puff, by purchasing a paralymp in advance and the upholstery tissue (the upholstery can be made using a mounting stapler). Such a shelf at the end of work can be covered with several layers of varnish, or paint the color you are interested in.

Portable shelf for shoes with their own hands

Great variant Easy wooden shelves For shoes that you can easily make with your own hands. This shelf has a large surface area, which means that it is possible to put your shoes anymore. Also, this shelf is perfect for toys, books, tools, shoes and other things. The shelf is distinguished by high mobility, which means that you originating at any time to put it there, where it can suddenly need.

Shoe regiment Carousel (step-by-step photos, drawings)

Here is such a multi-storey shelf with rotating shelves for shoes you can do using any ready cabinet Square base sizes, or the cabinet can be made again.

In the closet fix motionless metal pipeAnd you already install rotating round shelves for shoes. In these round shelves for shoes insert the pins, on which our shoes will be located.
The author of the shelf (which we, unfortunately, is not known) recommends to make two types of round shelves, on 9 pairs of shoes (children's) and 12 pairs of shoes (adult) (see drawings in the photo below). So the closet will be veins much more shoes and its effectiveness will increase.

See step-by-step photos and manufacturing drawings:

Shelves for shoes from pipes

Shoe regiment from pipes.
Master class do it yourself

Let's look at the photo How to make such a shelf for shoes from metal water pipes do it yourself. Step-by-step photos See in the photo gallery below.

This shelf will look great at the window, in the bathroom, hallway, living room or in the kitchen.

Step-by-step photos of Masterclass:

Outdoor shelf or table with shelves for shoes in the hallway

Most likely this option relates more to the tables than to the shelves. But still we placed this model here, because We hope that this version of the organization of personal will be interesting to you, and the main thing is useful, because With the arrangement of the housing, it is necessary to keep all the options !!!

See below Step-by-step photos of a master class

Photo source: DailyinteriordesignBlog.com Author Photos: Josh Rhodes and Elsie Larson

Shelf bench for books or shoes with your own hands

This shelf bench is also perfect for toys, for spare parts or tools in the garage.

The whole process of alterations, we did not lay out, because Hardly you will buy a rack that would make a bench out of it. Therefore, we have placed only the most necessary photos that you would simply familiarize yourself with this option. By photo you can make the same just from the boards.

Beautifully do thread for support books

Photo source: Instructables.com.

Shoe shelf do it yourself

Led four planks and make a conventional shelf for shoes not difficult, but what if you make a small highlight. How do you like this option? So to speak three in one, compact, creative, on wheels. The size of the main and internal shelves customize how you need, well, and mobility, it is very convenient.

Help building this funny shelf will help these step-by-step photos

Operating procedure

• We are determined with the total area of \u200b\u200bthe shelf, this is after they returned from the store with new wheels.
• We prepare the material, meter, we saw, grind.
• Remove the size of the internal shelves and the height of the racks. It all depends on, which shoes will be stored on the shelf, it is possible to provide everything from slippers to boot.
• We make blanks according to sizes, see how everything is beautifully decomposed on the photo.
• In the corners drilled holes for self-tapping
• We fasten the details at the beginning of the inner shelves, then the main.
• For the wheels, four holes for bolts are needed, they can be made in advance and at the end to twist the bolts.

Shelf is ready, further decorative work At your discretion. You can paint, climb the upper shelf with a cloth, it is already in taste.

Folding shelf for shoes

It is known that the shoes do not happen much, especially this topic is very relevant for women. But why we need, probably you can do and the usual, stationary design. The problem, as always, in the free space, there is always a lack of space in a small apartment, and in the summer, as you know, the number of shoes that enjoy is doubled. So the folding portable shelf is perfectly suitable as an extra room for storing shoes on summer season. Or another option, suddenly the guests came to you. In order not to make a landfill in the corner of the hallway, just take from secluded corner your folding shelf and order. In general, the thing is useful if I liked, make a folding shelf with your own hands not difficult.

Tools are the most ordinary - drill, jigsaw, sandpaper. Materials are shown in the photo, but it is your choice, board or plywood, see yourself. The assembly process is shown on step-by-step photos, everything seems to be clear there. You can read the instructions on the site, link under the gallery. The photo can see the shelf in the unfolded and folded state. According to the author, if there are all tools and materials, the manufacture of the shelf will take a maximum of two evenings.

Source photo www.instructables.com/id/folding-shelves

Shelf bench for shoes

This is such a simple shelf of wood to the hallway you will not be difficult to make it yourself. Look at step-by-step photos lower as it is done. The shelf of the bench is suitable for the hallway for shoes, in the bathroom, in a nursery for toys, in a room for books, magazines and newspapers.

Photo source: howtospecialist.com

Shoes for shoes from boxes

Shoe regiment from wooden boxes do it yourself

Another option of the shelves for shoes from wooden boxes, which can be made with their own hands.

This shelf is perfect for toys, tools in the garage, for shoes, colors (if you knocked the rear wall of the boxes), as well as for other households.

Below you can familiarize yourself with the step-by-step masterclass for the manufacture of this shelf

Photo source: Instructables.com.

How to make a shelf of shoe boxes - without nails

Perhaps it will be the simplest regiment you ever did. So, you need to find five boxes and an ink can. Then take the brush and paint the container in the color, which is best suited for your interior. When paint dries, everything, the shelf is ready.

You just have to decide how to settle them. If there are small children in the house, the design, of course, must be combined with bolts or screws, and even better, attach to the wall, it will be more reliable and safer. But if there are no children, then it is not necessary to fasten the boxes are strong enough. And the main advantage you can change the design form at least every day.. Imagine every day you have a new shelf and no nails

So, for example, today you have a pyramid, and tomorrow the ladder, under the mood.

After folding in a solid construction, it is very convenient to store shoes. For a variety, you can pick one drawer and fold anything.

How do you like the idea?
Source photo creatingreallyawesomefreethings.com

Corner shelf for shoes with their own hands in the hallway.

Let's see how to make a simple wooden angular shelf with rounded shelves in your apartment. This shelf is suitable for books, magazines, under shoes in the hallway, under soap accessories in the bathroom, under the instrument in the garage as well as under kitchen accessories in the kitchen.

Photo source: howtospecialist.com

Shelving Shelves from cardboard boxes do it yourself step by step

Watch the master class how to make this shelving for shoes by photo located above.

Minuses:

• not very reliable
• not tight

Pros:

• cheap
• simply

Two types of boxes are used in this design.

1. these are large of which the shelves are made.
2. these are narrow, of which drawers are made

All boxes are bonded by ordinary scotch.

Advice:

• to the upper shelves should lay light things on the lower larger and heavy.
• when you caulate large boxes, as shown in the pictures, you can make an additional shelves from these trims for small items inside the shelves, for this you simply should be done in cropping cuts and connect the trimming with a grid.
• also, these trimming can be used as additional supports inside the boxes, in problem places.

Photo source: wikihow.com

Cardboard Shoe Shelf

This is the easiest furniture you ever did. I imagine master class on making shelves for shoes from cardboard with their own hands , indispensable thing For households. In short: we make three equal strips from cardboard, we press them so that they begged well, you can be a blunt knife. On the one hand, they give the sheets with scotch. We make from sheets of triangles and Krepim Scotch. The resulting triangles fix glue on the cardboard sheet. Pyramid can make any size How much will do triangles, such will be. Top to secure another cardboard sheet, it will be top shelf. Such a piece can make anyone. It is useful before buying a locker so that the shoes are not lying, where it fell.

But this is not all if there are few places, can be done suspended shelf for shoes From cardboard, it's even easier. It is necessary to make such a rectangle from the cardboard sheet as in the photo. Size, select yourself, depending on which shoes you will fold there. Then decompose the box again, and using the template, cut the blanks. Then make the pockets, how much you need, insert them into each other and secure the back of scotch. The shelf can be hung on the wall or on the door.

Of course, for winter shoes is not very good optionBut in the summer very convenient, save a bunch of place.

Second door - wardrobe and shelf for shoes

Let's see how to make second door In the apartment, for example, in the closet, in the dressing room, in the wall.

If you want to make a secret room, or hide some kind of unsightly part of the apartment to do more aesthetic species, Follow the instructions below in step-by-step photo.

Do not use the loop because your the design must withstand up to 450 kg! The author of the photo advises to use bolts as hinged studs that should be welded in the frame.

IMPORTANT Secure the frame strictly vertically, it should be used to use a plumb. First attach the top attachment to the ceiling, and then fasten the bottom mount on the plumb (see photo).

See step-by-step photos of manufacture:

Do not forget to install Wooden door limiter (see photo). At this limiter attach the magnet that the door would be pressed pressed against the wall. Be careful when choosing a magnet, it should attract not too much and not too weak.

IMPORTANT!!!: according to the rules fire safety: All inlets into rooms in which furnaces or gas plates are located and gas pipes, Must be clearly visible.

Photo source: wikihow.com

Unusual shelves for shoes

do it yourself

As the theater begins with hangers, so any apartment with an entrance hall. Shelves for shoes are not just a useful piece of furniture, this is part of the interior design, so if you are a lover of creative solutions, you can start to surprise guests with an entrance hall. In this selection you can see some interesting ideas unusual shelves for shoes .

Schemes and drawings shelves for shoes

Shelf for shoes, it is not a closet and not a sofa, it is easy to make it with your own hands. It is much easier to do it if you already have ready project . A sketch, of course, can be drawn and independently, if there is experience in this business, but it is easier to use ready-made schemes, why to reinvent the bike.

For example, according to this scheme, make a tumb for shoes is not at all difficult

Types of shoe shelves Many - to the main one can be attributed to Bona, Slim, coupe, a cabinet, or a junction - galoshnitsa.

For the manufacture of some of them, various mechanisms are often needed, but any accessory today is not a problem to buy in furniture store. To save space often use the shelves "Slim"Although they have the features of the design, but if desired, this shelf can be made independently. Of course, it is rather difficult to make it quite difficult, you need to buy many different fittings. It's easier to buy ready and independently assemble. How it is done, you can look at this detailed scheme.

In this selection you can familiarize yourself with schemes different types shelvesIf you have experience with wood designs, these drawings can help with proportions and sizes.

Save place !

When planning the interior of the hallway, one problem comes most often - lack of space. To save space a little, you can go to different tricks, for example, one of the ways, although only for lodge shoes on thin heels. This feature of women's shoes can be used. At a distance of 5 centimeters, attach a long handrail and shoes to the wall and shoes exclusively at the expense of the heel.


If such an original shelf is beautifully arranged, it looks very original

from beer do it yourself for shoes

Let's look at how to make a shoe shelf (rack) from beer glass bottles do it yourself. If you already have four beer bottles (or from under champagne) and two boards, then consider that half of the case you have already done. Of course, in addition to this, you will also need low-cost fasteners that can be bought in almost anyone. building store.

Choose beer bottles with an elongated neck.

Shelves are shattered and covered with dark varnish.

To surprise, similar shelves for shoes from glass bottles are distinguished by their strength, as they can withstand the weight of an adult.

Puting one such shelf to another you get a shoe rack from glass bottles.

See step-by-step photos of the master class:

The photo source could not be installed (((

250+ photos

About the huge variety of shelves for we learn, only when we start looking for the appropriate option to do your hallway. Closed and open, one, two and do not know how many tousing, suspended, outdoor, wall-mounted - in general, very different. To have an idea, look at this gallery

And this is only a small part of the options.

The problem of placement of shoes in the apartment is always relevant - each person has several sets that require a lot of storage space. After the street, it is impossible to immediately remove shoes in the closet, so the presence of a special rack in the hallway will become the best solution.

Excellent solution for large number of shoes - high wooden shelf

Modern stores provide a wide range of varieties of any sizes and designs. A suitable shelf or rack will help save space in the hallway, will provide order, provide a place for shoes and shoes of your guests.

Modern entrance hall in the style of minimalism with open shelves for shoes

Despite the large selection of finished products in stores, it does not lose its popularity of the shelf for shoes with their own hands. You can make a model Ideally suitable for your interior in a stylistic plan, to accurately calculate the sizes, select the desired materials.

Locker for shoes from old furniture

The object of furniture is quite simple, so even a beginner master will cope with the task, and it is easy to find a project on the Internet for every taste.

Bright shelf for shoes from the pallet with their own hands

In addition to the pleasure of creative work, the manufacture of a shoe shelf will independently save on expensive professional carpenter services.

Painted boxes nailed to the wall play the role of the jacket and are decor in the hallway

Comfortable mobile shelf for shoes on wheels

Shelf for shoes with their own hands can be performed by many different options. Using primary means, such as cardboard boxes and wooden boxes, opens a wide field of fantasy work. You can also choose traditional way - Production of an item from scratch using tools and suitable materials. The design is the most different - outdoor, suspended models, lockers, shelves, panels.

Drawing for the manufacture of shelves from boards

Whatever the project you choose, you need to make a drawing - it will help to avoid errors with sizes, make sure that ready product Places on the place allotted. Therefore, the measurements in the room are previously removed.

Scheme and photo of the suspension metal shelf

In addition to the size, the functionality of the rack should be taken into account whether it will perform some additional tasks. For example, a locker simultaneously performing a table in the hallway will provide a place where it is convenient to put keys, an umbrella, small items.

Wood shelf with their own hands - drawing with dimensions

Required tools and materials

There are many pretty original solutionsHow to make a shelf for shoes with your hands from the girlfriend. It can be pieces of wood, plywood, metal, plastic, fabric. Linoleum segments, laminate, plastic water pipes are also used. When placing street boots, the material must necessarily be moisture-resistant, so as not to suffer from pollution, frequent cleaning.

A specific set of tools will depend on the selected materials, but it will mostly need items:

• saw-hacksaw, chainsaw;
• a hammer;
• bulgarian with cutting circle;
• nails, selflessness;
• electric drill;
• electrolovik;
• screwdriver, screwdriver;
• carpentry glue;
• roulette.

Work with the metal will require the use of the soldering iron, welding machine- When used, you can not forget about the means of protection (mask, gloves). Also need a planer, grinding machine, sandpaper. Fastening of parts from different materials It will require acquisition of accessories in a construction store - metal furniture corners, handles for the door.

From wooden boards

Scheme wooden stellage for shoes

For this simple project It is necessary to harvest the boards with a thickness of 1.5-2 cm. Pine is well suitable - its wood is easily processed and is distinguished by strength. Details will be only six, work is performed in the following sequence.

1. In accordance with the dimensions, the sizes of the frame are calculated and the drawing is made.
2. Put the side walls of the desired size (for a particular project, the height is about 80 cm).
3. Transverse crossbars are made - four pieces, about 60 cm.
4. Put support bars that support crossbars.
5. All surfaces are processed by sandpaper before smoothness.
6. Bruks are attached to the main fragments of respectively to each other.
7. The boards are stacked on the bars, the lower and the top is fixed through joinery glue, metal corners - It turns out the framework of the rack.

The sidewalls attached to the lower part make it easier to move the framework. Make a shelving for shoes with your own hands on the same principle from chipboard, plywood. In the latter case, care must be taken, - plywood is easily cracking and forms chips when cutting.

Three-tier regiment wooden Reques for eco-style

Portable

Lightweight shelves are very popular, which are easily moving or transferred to another room if necessary. Make a portable shelf of cardboard, fabrics and other materials.

1. Of the rigid wire, the ridges are made of the frame, which stretches the cloth panels. The frame of the rectangular, made by the type of hangers - when locating on the door of the cabinet, a filled tissue shelf will not be twisted.
2. Sews a rectangular panel from tight fabricWell carrying washing. Panel is tensioned on the frame.
3. Fabrics are called rows of pockets. Pockets should be dense, easy to clean. Soft plastic is suitable, thin rubber, covers for books.

A light portable shelf is well suited for storing summer sandals and sneakers, but will not stand the heavy winter, autumn shoes with which contaminated moisture flows.

For storage slippers, ballet shoes and children's shoes, pockets are perfectly suitable

Carousel

Multi-storey shelf with rotating shelves for shoes

This option will suit For installation in the hallway, placement in the closet. A round shelf with spacious cells makes it possible to quickly find the right pair of shoes - just tackle it around your axis. Make such a shelf can be made of wood, chipboard, plastic and metal rod.

1. In accordance with the size of the product, the coasters of the required diameter are cut. The center is made a hole for the rod.
2. On the bottom of the lower circle, the wheels or rotary mechanism on the bearings are attached.
3. Vertically dividers are installed on the circle - quadrangular shape blanks.
4. From above is placed and fixed the second round. The topmost circle is fixed on the rod with a bolt and washers.
5. Fasteners are performed using accessories (metal corners).

An either mechanism-support is used for rotation, or a double bottom is made - the lower stable layer and the first shelf above it. It will reduce the friction between the bottom and the first tier special gasket from the disks of smaller diameter.

Rotating shelf can be built into any suitable locker

Angle

Drawing homemade angular shelf to the hallway

The most economical and convenient for operation in small parishings Is the angular shelf.

Stages of work:

1. cut the required amount of transverse crossbar - triangular or semicircular;
2. with the help of accessories, attach them to sidewalls - it can be both solid fragments of wood, plastic, cardboard, forming angle and separate vertical rails.

The angular container can have a fairly large height, and its triangular compartments contain many pairs of boots, while not torn functionatic space

Corner shelf for shoes with your own hands in the hallway

From segments of water pipes

An unusual option will be using plastic pipes, sliced \u200b\u200bin a certain way and connected by glue. Original designhaving a stylish look, looks good in modern interiors.

The design of water pipes is convenient because it is easy to make any width and height, vary them. The compact shelf of segments will fit into the smallest space.

Design of vertical shelf-rack of plastic pipes

From cardboard boxes

Dense Cardboard

The most affordable and unfortunate option from all. A minus design is a small strength, so light sneakers and slaps are recommended to the upper compartments, and heavy shoes put down.

Rack out cardboard boxes do it yourself

Production.

1. The boxes of the same size of two types are selected - large for frame, smaller for drawers.
2. The boxes are neatly trimmed or covered covers. Large boxes fasten with scotch in the rack.
3. Larger boxes in the front wall cuts out a rectangular hole.
4. Boxes are inserted into the cells.

Cropped parts of covers are made internal partitions, fittings for small things. Cardboard easily absorbs water, it is recommended to process all drawers in moisture-resistant paint, varnish.

Unusual cardboard shelf for shoes from small triangles

Decoration

Shelf for shoes in style Provence with effect effect

Depending on the manufacturing material, decoration means will be different. The decoration of wooden products will require sanding with sandpaper, cooran lacquer treatment, various vintage, paint on wood. Wooden design It will last much longer, if you treat it with moisture-proof impregnation with an antiseptic - it will protect from mold and fungus. Metallic and plastic designs suitable quick-drying paint, self-adhesive film with decorative pattern. Cardboard needs to be protected from moisture exposure to a special impregnation. Shoe shelf can be painted in any color according to common design interior. Registration is often completed with drawing, ornament with paint. Wooden crafts Often decorated with a thread, burned with an image made by means of a special device.