Chamomile from the wheel. A flower bed of old tires with your own hands. Suspended flower garden made of tires

It is a natural desire of every owner to decorate the courtyard of a private house in a beautiful, original, and tasteful way. But often a modest budget does not allow the imagination to roam freely - all kinds of accessories and designer "tricks" cost a lot of money.

Is it possible to improve the site without harming the wallet? Undoubtedly. For example, flowers or ornamental plants - great decoration any territory - can be placed in the original "frame", lovingly created by your own hands. Old tire beds are a worthy alternative to concrete, ceramic or plastic industrial solutions. It is 100% exclusive at no extra cost.

Garden creativity and its benefits

The idea of equipping flower beds with old tires is by no means new. But if earlier all creativity was reduced to a simple installation of tires on the ground, their monochromatic painting and filling them with earth, today you can see real rubber masterpieces in gardens and courtyards. Used car tires - great stuff for creating garden decorations... It has a lot of advantages, among which it is worth highlighting the availability, ease of processing, durability.

Tire beds are very resistant to adverse weather conditions and are able to maintain an attractive, "juicy" appearance for several years (subject to the use of high-quality paints and varnishes).

You can always build a multi-colored pyramid out of old tires, make a zoological flower bed, or even equip a flower garden on the wall of the house - there are many interesting options. Of course, you will have to spend a lot of time and effort, but the result will be definitely worth it!

Which tires are best for you?

Having a choice between domestic and imported tires, always give preference to the latter. They are made from thinner and softer rubber and are much easier to handle. It is especially important to have a soft material if you need to turn the product inside out - with hard rubber you will have to sweat a lot.

As for the seasonality of tires, it is better to take winter tires.

Worth knowing! High degree the wear and tear of rubber is by no means a drawback, on the contrary, it is easiest to make street flowerpots of the most bizarre shapes from such a material.

Before making a flower bed from tires, a number of preparatory manipulations should be carried out with the existing material. First of all, the tires should be cleaned of sand and dirt. You will also need to sort them by size, tread pattern, degree of wear. All this will facilitate and speed up the creative process.

The simplest rubber flower garden that claims to be original is a multi-level flower bed. It is enough to paint several tires in matching bright colors and set them on top of each other in an "arbitrary shape".

Cute vertical flower bed can be built from tires of different diameters, stacked according to the principle of a pyramid.

Original and stylish flower beds can be suspended. By attaching a thick cord, metal chain or rope to the tire, you can hang it from a tree or beam. A practical and exclusive solution is the arrangement of the rails on the wall, doors or a support specially built for this purpose.

Quite interesting are the flower beds on the topic of home tea drinking. A few tires, complemented by a cut of pipe and pieces of bent metal tape, can easily turn into a cup and teapot.

Unusual mobile flower beds can be created from tires mounted on stool legs. You can also use old buckets as stands for movable flower beds.

Uniquely attractive, admirable and some kind of childish joy are self-made flower beds made of tires in the form of animals. To make such creations look neat and "natural", of course, you need to try, but in general, they do not require any titanic efforts and extraordinary talents. For example, a funny turtle-bed is obtained from one tire and a tread, cut into 4 equal parts (plays the role of paws).

Browse more various photos flower beds and you will definitely be inspired by the mass interesting ideas!

Flower bed from an inverted tire

Some of the most practical and aesthetic rubber street flowerpots for flowers there is a flower bed made of a tire in the form of a flower. The algorithm for its creation is as follows:

1. Chalk the petal onto the tire circumference with chalk. The shape of the petals can be absolutely any - rectangular, triangular, round. If you do not mind long painstaking work, you can even make them wavy.

2. Armed with a very sharp knife, cut out the petals according to the drawing.

3. Unscrew the tire (most time consuming step).

4. Paint the product to your liking.

How to make a flowerpot-flowerpot on a leg?

If you have at your disposal not just a tire, but a whole wheel, you can make not an ordinary flower bed, but an original vase with a leg. To do this, it is necessary, in the same way as for a flower bed, to apply and cut out a pattern of petals and turn out the tire. The only difference is that the rubber remains attached to the rim. The disc with the part of the tire, which in the first case was sent to the trash, at the same time form a nice and neat flowerpot leg.

For a better understanding of the technology for creating such flower beds from tires, video with detailed instructions look will not be superfluous.

Exquisite flower garden in the form of a swan

A swan flower bed will require the application and cutting of a more complex pattern. If for a flower bed it was necessary to form the same type of petals, then here you will have to work on the wings, tail, neck, head. After you cope with this task, you will need to turn the tire out, connect 2 parts of the head with self-tapping screws, attach a beak and eyes to it.

Tire painting rules

For the old tire to find new life as a flower bed, one cannot do without its key transformation - painting. The aesthetics and presentability of the flower garden will depend on how responsibly you approach this process.

Degrease the rubber with acetone or white spirit before using a brush or spray can. To obtain a uniform, saturated color it is recommended to paint the tire in White color, and only then apply bright. In addition, thanks to such a "base", the main "coating" will last longer.

As for the brand of paint, you can, in principle, use any. Specially designed for rubber products are guaranteed not to crack in the cold and will ideally close all cracks and grooves, but their price is quite high. Therefore, you can safely use paint or enamel left over from the last repair. A good option is spray paint - it is applied in a thin layer and penetrates well into the cracks.

Original decoration for suburban area or yard can be done using garden flowers and materials at hand. To do this, you need to purchase a flowerpot or a plastic container at a hardware store, at a fair cost. Or you can make a bright and beautiful flower bed old tires are no worse than beautiful pictures from the Internet.

Advantages and disadvantages of tire products

An unusual flower girl can be made from an old wheel, its smooth inner part, turned outward, looks very beautiful. A flower bed made in this way looks very attractive, and at first glance, it is impossible to determine what it is made of.

Advantages of tire beds:

Profitability. No expensive shopping needed, any used car tire will do. If you do not have it, you can ask your neighbors and acquaintances.
Originality. Such flower beds, as you definitely will not have, monotonous faceless plastic containers will remain in the past.
Mobility. If you decide to change something in your yard, then the flowerbed can be easily moved to a new place, do not forget to first remove the soil with the plant.
Creation. You can realize your artistic abilities that you might not even know about. If you get tired of the color or pattern, you can simply repaint the car tire.
Variety of shapes. By turning on the imagination, you can create interesting and unusual flower beds in the form of swans, turtles, frogs, tea sets, flowerpots.
Durability. Such a flower bed will serve you for many years. She is not afraid of any unfavorable weather conditions. Over time, the paint can only fade, but this is easily solved.
Functionality. A tire product can be not only decorative decoration, you can also grow seedlings in it.

Cons of tire products.

Unaesthetic. If you have a beautiful and well-kept country house, then the tire flower girl will look out of place. You need to choose more elegant forms for the flower bed.
Time and effort. In order to make such a flower bed, you will need time for preparation and an assistant, especially if the car tire needs to be turned out and worked with a jigsaw.

If you have decided that such a flower bed will perfectly fit into your garden plot, you can begin the process of preparing for creating a flower bed.

Determine the location of the flower bed and prepare a site for its placement.
Choose a suitable tire. Give preference to imported wheels, they are softer and thinner. It is better to choose winter tires, they are more pliable and more convenient to work with. The most worn tires, the rubber on which has become thinner, will be easier to turn out.
After that, it is necessary to clean the tire from traces of dirt and other foreign objects.
If the flower garden will consist of curly elements, then you need to cut the tires with a marker or chalk.
Purchase or prepare paints, brushes and other necessary tools... Car paints, paints with enamel and acrylic compound, oil paints and nitro enamels.
Prepare flowers that will be transplanted into the flower bed. And various decorative elements that may come in handy - pebbles, shells, etc.

How to paint a flower bed from tires: instructions

Some summer residents make flower beds from car tires, leaving them unpainted, however, flower beds painted in bright colors look more advantageous and more attractive.

After the tire is thoroughly cleaned of dirt and small stones stuck in the tread, it must be thoroughly washed and allowed to dry.
In order for the paint to better adhere to the surface, it should be degreased with acetone or white spirit.
After complete drying, the surface of the tire must be cleaned with sandpaper.
The paint can can be warmed up a little, making it easier to apply.
For ease of application, it is better to choose an aerosol can with paint, this will save you time. It is necessary to put polyethylene under the tire so as not to stain the grass with paint.
The tire can also be painted with a brush, it will take more time, but you can paint it already having installed it in its permanent place.
It is better to paint in several layers, 2 or 3 times. Each layer must dry for at least a day.

It is better to apply the first layer with white paint, and then the main one.

It is necessary to paint the product both outside and inside, or at least the upper quarter of the inside. This will give the flower bed a tidier look and protect it from the effects of the weather.
There is no need to apply paint in thick layers, it will crack quickly from heat or cold.
It is better to choose light colors for painting so that the plants and their roots do not overheat in the sun. Bright colors are great for such flower beds, however, do not forget that the color of the painted product should be in harmony with the color of the color planted in it, not dominate.
Tires can be left solid, patterned with a stencil, or tread strips can be painted.

DIY tire flower bed: creation technology

The preparatory work has been completed. Car tires are painted. It remains only to decide on their form:

Single-tiered. The simplest type of flower bed - a painted tire is simply filled with soil in which flowers are planted. You can make a low flower bed by burying it in the ground, leaving only a colored border. The tires can be laid out in a certain sequence, for example, in the form of a chamomile.
Multi-tiered. To do this, several tires of different diameters, painted in different bright colors, are stacked on top of each other in order of decreasing tire diameter. Or a pyramid is made of tires of the same size. To prevent the structure from falling apart from the inside, you can fasten them with a screwdriver.
Suspended. The cover is attached with chains or ropes to a branch or pipe like a pots. Also, such a planter can be hung vertically on the wall of the house, it looks very original!
Curly. To create such a flower bed, the tire must first be cut with a grinder or an electric jigsaw, in extreme cases, with a knife, moistened with soapy water. Assemble the intended composition and draw individual elements, if any.

Making a flower bed from a tire in the form of a flowerpot: instructions

A flower garden in the form of a flowerpot looks very nice. This will require a soft and worn tire, as it will need to be turned out.

Let's consider this option in more detail:

Cut out the petals for the flowerpot. They can be absolutely any shape - round, square, rectangular, abstract. To do this, the markings are applied to the car tire with chalk or soap on upper part and neatly cut with a jigsaw. Always wear gloves, goggles and a respirator when handling the tire.
We turn out the tire. This part of the job requires some effort and skill. To do this, turn the tire upside down and, grasping the edges of the petals, turn it inside out, slightly pressing it, and flatten it into an oval.
We paint the resulting product in the selected color, fill in the soil and plant the flowers.
In order to make a flowerpot on a leg, we take another tire with a disc for greater stability and, using a similar technology, cut out the petals to the very tread and turn it out. The tires are stacked on top of each other in the form of a flowerpot with a leg. They are colored and planted with flowers.

The final step in creating a flower bed is planting flowers. For these purposes, it is better to take perennial plants with a beautiful and bright inflorescence.

Also, the choice of colors will depend on the type:

Suitable for single-tier flower beds pansies, marigolds, nasturtium.
For a high flower bed, the most the best way- ampelous plants: begonia, geranium, lobelia, ampelous petunia, dichondra.
Plants of the cascade type are excellent for a suspended flower bed. They will hang beautifully and draw attention to the vibrant colors. This type includes petunias, ivy and tumblers.

Making a flower bed from tires with your own hands is a process that requires certain skills and creativity... However, the result is worth it. Bright and beautifully decorated flower beds will delight you for a long time!

In contact with

Tire flower beds will be very useful if the gardener wants to make beautiful flower beds while decorating his plot, but at the same time not spend extra money on their creation.

The use of these materials allows you to create colorful flower beds, sometimes very unusual shapes that will not leave anyone indifferent.

Such flower beds will stand for many years and will delight with their appearance.

In the photo below you can see that even flower beds made of such an unprepossessing material can look bright and colorful, you just have to make a little effort.

Making flower beds from wheel car tires is very simple; the whole process does not require any special knowledge, skills or tools.

All you need to make such flower beds is the presence of old wheels that will need to be cut, oil paint, an electric saw or a knife, and imagination.

How to choose tires for flower beds?

In any tire shop, there are always a few old car tires that are ready to be discarded.

If you can choose, then give preference to imported manufacturers, which are made of thin and soft material.

It will be easier to make flowerpots for a flower garden from a soft and pliable material. It is better to choose winter and the most shabby rubber.

Turning out tires with worn out tread will be much easier and easier.

Before making the flower beds, clean the wheels of dirt, as a dirty tire will be difficult to cut.

It is best to cut the tires with a jigsaw or a grinder, but if they are not there, then you can cut it with a sharpened knife, which can be lubricated with soapy water during operation.

The simplest tire beds

If you do not have time at all to make masterpieces from tires with your own hands, and you are satisfied with the simplest option, then in this case you can simply put the tire in place of the flower garden, pour drainage and soil into it, and then plant it with plants.

However, this option will only decorate your yard with plants.

To make the flower bed look attractive and beautify your site in itself, take a few tires and paint them in bright saturated colors.

Another very simple version of a do-it-yourself flower bed for flowers can be made from tires different sizes.

In this case, they are laid out in the form of a pyramid, and at the top you can put a very small wheel or a flowerpot with flowers.

By painting the wheels, you get a wonderful flower garden in which you can grow not only curly flowers, but also strawberries or strawberries.

In the photo you can see what such flower beds look like.

It is very easy to make a hanging flowerpot from a wheel with your own hands. To do this, it is not necessary to cut it, just attach a chain or rope to it and fasten it to a tree or canopy.

To prevent the earth from spilling out, the bottom of the tire must be covered with a piece of plywood or rubber. Or you can insert an ordinary pot into the tire.

And if you attach 3 or 4 legs to the wheel, you get a standing flower bed that can be placed in any corner of your site.

Flowerbed - flower

If you have a lot of space in your yard, then you can make a flower bed in the form of a chamomile.

To start making it, you will need 4 tires of the same size, three of which must be cut in half to make 6 semicircles.

You need to paint the halves and the whole tire in bright colorful colors. The whole tire will serve as the center of the flower; halves should be laid around it in the form of petals.

The tires should be dug into the ground by about 5 - 6 cm. The composition will look very nice if one type of flowers is planted in the middle, and another type of flower is planted in the petals, best of all with a contrasting color, for example, as in this photo.

Flowerbed - turtle

Such a beautiful flower bed will be very useful if you have small children, and it is also a great option for a flower bed in a kindergarten. Doing it yourself is not very difficult. You will need two tires.

From one tire, you need to cut off the sidewalls and leave only the tread, which should be cut into 4 parts.

In the whole bus, 4 holes are made into which the workpieces are inserted and fixed with wire.

The turtle's tail is made from rubber trim and attached in the same way as paws. The head is modeled from pipe and crumpled newspapers and secured against the tail.

This whole structure is painted in a suitable color. Additionally, you can decorate your turtle with a hat or other elements.

Flower bed - frog

A flower bed - a frog will appeal to both children and adults, no one can pass by it. Flower bed - a frog is very simple to do with your own hands. You will need 3 tires.

Two need to be placed on the ground very close to each other, and the third is placed on top in the middle. Next, you should make the paws. To do this, you will need tire scraps and pieces of old hose.

Cut the rubber tabs and wire them to the hose.

Eyes can be made from plastic bucket lids, and the crown is made from a plastic bottle.

The whole structure should be painted green. oil paint... A flower bed - the frog is ready, you can plant plants and admire this beauty.

Flowerbed - cup

If you have two tires of different sizes, then you can make a flower bed - a cup. To do this, first place a small tire, on top of it - a larger tire.

The edge of the top tire should be cut off so that it does not interfere with plant growth. From the scraps, you can make a handle for a cup.

If you have a piece of sidewall from a large tire, then use it as a "saucer" - place it under the cup.

By the same principle, you can make a kettle, only except for the handle from the trim bent pipe attach the spout to the kettle.

Paint your tea set in the appropriate colors, for example, as shown in the photo.

Flowerbed - flowerpot

For those who are not afraid to do hard work, there are more difficult options. For example, from old tires that need to be cut, you can make a beautiful flower bed with your own hands - a flowerpot. To do this, you can use a bus with or without a disc.

If you take a tire with a disc, then you get a flowerpot with a leg. Depending on what pattern you put on the tire, this edge of your flowerpot will work out.

It can be round petals, sharp petals, fringes, or a straight edge.

Lay the wheel on its side and draw the outline of the cut that you have chosen for your flowerpot and along which you will need to cut the petals.

Please note that each petal should be no more than 12 cm, otherwise the flowerpot will not turn inside out correctly.

Use a jigsaw or knife to cut out the outline and turn the wheel inside out. Reversing the wheel is the most difficult part of the job for most gardeners, especially women.

To unscrew the wheel, turn it over with the notch down, step in the middle, and grasp the incision with your hands and pull the edges towards you.

After turning it inside out, you will have a finished flowerpot that can be painted with oil paints in one or more colors.

You need to paint the flowerpot not only outside, but also inside, otherwise, even if you plant it with plants, black rubber will be visible from under them.

On top of a monochromatic layer of paint, you can apply various patterns and ornaments, as well as glue pebbles, shells, glass and other decor.

The photo below shows step-by-step instruction making flower beds - a flowerpot from old tires.

Do not forget that a drainage layer should be laid at the bottom of the flowerpot so that the soil in the flowerpot does not deteriorate, after drainage, the soil is laid in the flowerpot and the plants are planted.

If you have three tires of different sizes, then you can make a flower bed out of them - a pyramid, but in this case you need not just put the tires one on top of the other, but first make flowerpots out of them according to the above principle.

As a base, you can take logs of different diameters and set the flowerpots on top of each other, alternating with the logs.

As a result, you will get an unusually beautiful flower bed, which will not only please the eye, but also save space in your garden.

Flowerbeds in the form of birds

This is a rather complicated version of a do-it-yourself flower garden, which also involves turning the tire out.

Such crafts can serve as a yard decor or flower pots, depending on your desire.
To begin with, markings are applied to the tire, which therefore will need to be cut, as can be seen in the photo.

After that - with a jigsaw or a knife, you need to cut out the head and wings of the bird and turn the wheel out.

To make the swan's neck beautifully curved, a piece of reinforcement or stiff wire is attached to it with a thin wire, bent in the shape of the swan's neck.

You can use other materials that you have on hand. Next, the swan is painted white and the beak is applied red, as seen in the photo.

You can also make other unusual birds for the garden from old tires - parrots and toucans with your own hands.

To do this, cut the rubber as shown in the photo, turn it inside out and attach a plywood beak or rubber trim to the bird's head.

After that, the bird is painted in bright colors and hung.

Tire fencing

If you plan to make a large-sized flower garden on your site with your own hands, then you can install a tire fence for it.

To do this, dig a trench around the perimeter of the entire flower garden, half the height of the tire.

Place the tires close to each other and bury.

Paint the fence in suitable colors.

Such a fence will last for many years.

A flower bed of tires lined with stones

In this case, the tires are used simply as the basis of the flower bed. To create such flower beds, you should choose tires of different diameters, as well as beautiful stones for cladding.

Stones of different sizes and shapes will look beautiful in the finished product. Flower beds made of stones can be bunk, have different shape and decor.

In the shape of the future flower bed, dig a depression in the ground, cover it with sand and lay out the first row of stones.

Try to lay out the stone so that the cement does not look outward, but only fixes the stones to the base.

Original frames for garden plants can be created even from waste material: and the yard is decorated, and the environment is good. Learn how to make flower beds with your own hands from flower tires in the country or in the yard. Evaluate the feasibility of such work, familiarize yourself with the methods of cutting, turning out and painting car tires, with the nuances of their competent choice. Compare photos of finished products and choose a master class for making an unusual flower garden that is suitable for the degree of labor intensity.

The feasibility of making flower beds from tires

Used tires are a material in which any landscape designer who can imagine how to make flower beds out of tires with his own hands opens up new possibilities. It is the tire, and not just a sheet of rubber, that has certain advantages that make it easier to work with it:

A penny cost. Surely among the neighbors there are car owners who dream of parting with old tires. For them it is rubbish, but for an artist it is a future work of art, which can only be rolled to the site or brought in the trunk.
Ease and speed of processing. Chalk, a sharp knife or jigsaw, a grinder and a can of paint - these are all the tools you need for such creativity. And the simplest flower bed of cylinders is built in half an hour: the tire is put on the ground and "stuffed" with soil.
Durability. A rubber flower bed does not attract bacteria and fungi, does not rot, is not afraid of accidental impact and does not collapse under the influence of precipitation. If it cracks after a particularly severe frost, it is easy to replace it.
Mobility. Flower bed of old tire- one-piece construction, which, if necessary, can be easily moved to another place. To do this, you just need to remove the soil from it.
The possibility of transformation. Even self-made flower beds made of tires can get bored over time. The easiest way to avoid this is to repaint the outside and plant other types of plants.

Figured flower bed from an old tire

Doubts about the advisability of decorating a garden with flower beds of tires are usually associated with the sizes of cylinders specified by the manufacturer. In a very modest area, they, indeed, can look foreign, and in a large area they can get lost. The problem is solved by combining tires with paths, benches, lighting elements, as well as the construction of flower beds from several tires and multi-tiered compositions.

Option for the lazy: potted plants are placed on a stand

How to cut tires and how to do it right

When you look at the wheel, so huge and rigid, capable of withstanding the weight of a laden "Gazelle" or a powerful SUV, the question arises of how to cut a car tire for a flower bed. In fact, rubber is even easier to handle than plywood if you choose the right tool for each stage of work, of which there are three:

Ripping rubber. Best tool for the first cut - a boot knife. You can make it yourself from a power saw blade or a planer blade. The handle of such a knife is wrapped in several layers. insulating tape allowing the knife to sit firmly in the palm of your hand. This is important as the rubber will resist the blade. The knife is inserted into the incision and made upward movements, bending the rubber sheet to the side with the other hand.
Sidewall processing. You can trim tires for a flower bed evenly or in waves. In the first case, a boot or other sharp knife with a thin butt is enough, in the second it is better to use a jigsaw, the file of which is periodically lubricated with solid oil or solution laundry soap... Some craftsmen use a grinder with a small disc, but high speed entails strong heating and even burning of rubber with smoke and unpleasant odor.
Cutting the cord. Steel cord reinforcement (breaker), which serves as the basis of the tire carcass, is cut with a grinder, less often with metal scissors. The presence of steel in the belt can be recognized by the Steel markings. The absence of such a marking indicates a nylon cord, which is cut with a strong sharp knife.

The car tire is more complex than it seems

The jigsaw is the perfect tool for cutting old wheels

To cut the tire for the flower bed and not injure yourself, be sure to use heavy gloves and safety glasses. It is especially necessary to handle sharp metal cord threads - splinters from them are very painful. You need to work on a wide, hard surface: a table or a piece of plywood on the ground. With a large amount of rubber dust, which is characteristic of Chinese tires, a respirator will be useful.

How to choose and prepare a tire

Working tool for steel cord - angle grinder

If it is possible to choose a material for a flower bed, you can greatly simplify the work of processing rubber with your own hands. To do this, you need to use the data:

the origin of tires: imported ones are better cut;
seasonal use: winter is more flexible;
service life: the more worn, the more pliable;
cord material: metal will require more effort than polymer.

Well-preserved and brightly colored tread

The degree of tread wear should also be taken into account. A clear pattern of checkers will give additional expressiveness to the finished flower bed. But if you plan to turn the tire inside out, the tread needs to be as "bald" as possible.

In any case, the first operation to transform a tire into a small sculptural form is to remove dirt. The tire is washed under a powerful stream of water from a hose. This will not only add aesthetics, but also protect cutting tools from rapid dullness.

Options for flower beds from tires and master classes

The fantasy of home craftsmen knows no bounds - those who like to equip household plots with their own hands, we came up with dozens of design options for flower beds from car tires.

Classification by form and method of manufacture

Beds of old tires are conventionally divided into several groups:

horizontal single-tier - the most simple and unpretentious;
horizontal multi-tiered - the first floor of such a flower bed is 5-7 tires, on top of them there are three more and the last one crowns the composition;
vertical - there is a tower made of tires, flowers are planted in the top and in the pockets cut out on the sides;
in the form of items of rural use: teapots, carts;
in the form of various animals.

Another interesting type of flower beds made of unnecessary rubber is hanging pots, with which you can diversify the wall of an outbuilding.

The dull brick is simply unrecognizable

How to mark rubber

To make the tire bed even, before cutting, you need to outline a line along which the knife or jigsaw will move. It is convenient to do this with the help of chalk or a bright marker, which will stand out against the graphite background of the rubber.

The brighter the markings, the more convenient it is to work.

The first line should be in the shape of a ring. It is carried out in two ways:

Measure with a tape measure equal distances from the outer or inner edge of the tire, apply strokes (approximately every 10-15 cm) and connect them.
Holding the chalk large or forefinger, cling to the protector (or bead ring) with their little finger and lead the line.

To mark the petals, you will need the inner and outer lines. Marks are applied to each, then they are connected with a wavy line of any style. At this stage, it is important to take into account that petals less than 7 cm wide do not hold their shape well.

Four wheels and a little paint - the result is a bright flower garden

Flower - fast and reliable

The options presented in the photo in this section are among the easiest to manufacture, but quite effective due to the competent floral decor... The following step-by-step instruction will help a novice landscape designer to make a flower bed out of tires.

Take four identical tires and rinse them thoroughly under running water.
Set one aside for now, and on three, draw a line with chalk dividing each one exactly in half.
Cut the three marked tires with a boot knife or jigsaw.
Paint all tires using a paintbrush or spray can. Choose a color so that it blends well with the plants you plan to plant.
Lay the halves of the tires in the form of petals, fill the flower garden with prepared fertile soil.
Place the whole tire in the center of the composition and also complete with soil.

Flowers can also be cut from tires

Turtle - Feel like Galapagos

To make a flower bed from car tires with your own hands turn into a genuine creativity, try making a turtle figurine:

Prepare two tires for the flower bed. Leave one intact, and cut the protector out of the other.
Divide the protector into four equal pieces that will become the turtle's feet.
Make a short, triangular tail out of a piece of tread.
For the head, take a flat bottle from household chemicals for example from "Mister Muscle". Its neck will become the neck of a turtle.
Make cuts in the whole tire and insert the paws, tail and bottle into them. Secure with self-tapping screws.
Color the turtle, draw its face.

On a turtle flower bed in the garden, low bright flowers: tagetes, nasturtium, ornamental cabbage.

Frog - from princess to traveler

If there is a pond in the garden, plant a cute frog figurine on its shore. The good thing about this idea is that the frog can be done without the time-consuming cutting of the steel cord. The main thing is not to regret the rich green paint.

Eyes from plastic bowls, feet from a hose and rubber mat

The body of the animal is laid out from three solid tires in the form of a two-tier flower bed. For the eyes, take the tires of a smaller diameter and set them vertically.

Depending on the desired degree of glamor, they are glued rubber glue or they screw long or short eyelashes with self-tapping screws, paint "lips with a bow" or a simple smile with red paint. You can complement the image with an arrow, a crown or a pair of ceramic ducks.

Flowers in such a bed are placed behind the eyes and in the lower tier. Around the figurine, grasses and sedges are appropriate, hinting at marsh vegetation.

Video: One hundred garden frogs do it yourself

Swan - white grace on a green lawn

If you have learned how to cut tire beds with your own hands to decorate your garden, you can try making a swan. This work requires some skill, since a part of the tire in such a figure must be cut, turned out and strengthened in a certain way. Let's consider in stages the process of giving birth to a beautiful bird from rubber scrap.

Cutting the tires is the most crucial moment

Choose a tire for the flower bed with the most worn out tread, since the curly cuts will have to be done on it.
Using the pattern in the photo, apply the lines of the head, neck, wings and tail to the protector. Pay attention to the shape of the beak - this is the most difficult part. Some craftsmen make the beak in the form of an ordinary triangle, while cutting is easier, but the bird loses its realism.
Drill holes with a diameter of about 10 mm at the nodal points of the marking.
Cut the rubber along the markings with a boot knife or jigsaw. Work should be started from the base of the figure's neck, leading the cutting line to the head. To prevent the rubber from vibrating, it is recommended to cut both sides in parallel, 5-10 cm each alternately.
Finish the edges of the parts: sand off the rubber and the ends of the cords. Tire swan flower beds attract children - you should take care of their safety.
Turn the wings inside out.
Reinforce your neck with a steel bar. To do this, drill two rows of holes in it and then through the whole body to the base of the tail, at a distance of about 15 cm from each other. Pass the wire staples through the pairs of holes.
Attach a steel bar to the base of the tail and secure the chest and neck of the figure to it, twisting the ends of the wires with pliers. Trim off excess and give the swan neck a regal curve.
Paint the finished shape, highlighting the beak and eyes. It will look especially impressive if you plant it (and attach it with self-tapping screws) in a pool made of a blue-painted tire.

Instruction in the photo:

Swans on stands, as if on waves

Vase - build a small Peterhof in the garden

The aerobatics of the transformation of car tires is considered to be the manufacture of flowerpots with legs from them. It is worth turning the unsightly wheel inside out and painting it - in front of you is a masterpiece of landscape art, in which it is difficult to recognize the source material.

Elegant flowerpot for a flower garden

To create flowerbeds in the form of flowerpots, they take "bald" winter car tires of foreign production - they are the softest. On the sidewall, jagged or rounded-wavy petals are marked, along which the rubber is cut. At this stage, it is important to try to keep both sides of the cut neat, as one of them will be the edge of the vase and the other will be the edge of the leg.

Stages of turning a tire into a flowerpot

It is better to turn the wheel out together. It is placed with the incision down, for support, they step on the disk with their feet, grasp the edge of the incision with both hands and pull it towards themselves. Gradually move in a circle, pressing down on the tread in its most convex part. If there is a camera inside the wheel, it is cut off at the end of eversion. Due to the laboriousness of the process, it is recommended to watch a video on how to turn out a tire for a flower bed with your own hands.

Video: How to turn a car wheel out

The flower bed-vase from the tire is almost ready, but it looks like it was taken from the seabed. The rubber walls and disc are cleaned, degreased and painted, and from the inside, too, about a quarter of the height, since the ground level will be below the petals.

Geotextiles are placed at the bottom of the flowerpot so that the earth does not spill out into the holes of the disc. Drainage, soil are poured over the fabric and flowers are planted in the flower bed.

Gift for the Mistress of the Copper Mountain

Painting flower beds from car tires

Now about what the wheels for a flower bed are painted with and how to turn a boring tire into an interesting flower garden. The main requirement for paint is resistance to impact atmospheric phenomena.

The choice of paint and technical points

Tires are painted with enamels, oil, acrylic and car paints, nitro paints. To beautifully paint tires for a flower bed, you need to follow a few rules:

pick up bright hues so that the soil inside does not overheat along with the roots of the plants;
do not apply too thick a layer of paint, otherwise it may crack, especially in severe winters or in the heat;
remember the primacy of plants and not let the pattern dominate the flowers.

Bright colors set a festive backdrop on the site

The design of tire beds begins with degreasing them with acetone, white spirit or special rubber fluids. When the used product has completely evaporated, the surface is smoothed with a very fine sandpaper. Then a thin, but continuous layer of white is put as a primer - this will allow any shade to play in full force.

It is better to apply the paint through an aerosol can, then it will penetrate into all the embossed areas of the tread, but there is a great risk of staining the grass around. Therefore, they paint the tire with a spray can, spreading thick polyethylene under it. Each layer is given a drying time of at least a day.

You can decorate a flowerbed of tires with your own hands with a brush. This is longer, but you can work, having previously installed the product in a permanent place. With the help of a brush, they also create more subtle patterns and patterns, emphasize details and shapes.

Folk painting: bright, original, impressive

Taking into account the general concept of garden decor will allow you to paint the tires for the flower bed correctly, while you can:

leave plain;
arrange in stripes;
cover with a pattern using a stencil;
paint on the tread checkers;
turn into an ethnic flower garden.

Do not rush to throw away the unusable tires. They will be burned by adding pollutants to the air. Try to turn them into a unique man-made flower garden, which will decorate the garden and warm the soul. Bright, solid and almost eternal flower beds made of used tires are a wonderful use for the creative impulses of a person living on their land.

One of the most simple ways to refine a suburban area - to issue it flower arrangements... Colorful flower beds, mixborders and flowering flower beds transform the territory, making it elegant and cozy at the same time. To emphasize the natural beauty of blooming compositions, they need to be framed in a decent frame, which can be played by flower beds from tires. Do-it-yourself flowerpots will serve not only as a functional design element, but will give the site exclusivity.

If you want to decorate a site by complementing it with picturesque multi-level containers, it is not at all necessary to spend a lot of money on purchasing ready-made flowerpots in gardening stores. You can make beautiful and durable flowerpots from worn-out car tires. The main advantage of this material is its resistance to adverse weather conditions and the ability to maintain an attractive appearance for several seasons.

Decorative flower beds made of old tires allow not only to emphasize the splendor of the colors flowering plants, but to give the compositions completeness

To make a flower bed from tires with your own hands, you can use tires of both imported and domestic production. But if you have a choice, you should still give preference to imported products, since they are made of softer rubber, which is much easier to work with. Choosing between summer and winter tires, it is better to prefer the second option.

Since in the manufacture of such a flowerpot, the greatest difficulty is the question of how to turn out a tire for a flower bed, because rubber is a rather tough material, to facilitate work, it is better to choose tires with maximum tread wear.

For arranging flower beds, tires with a diameter of R12-R17 are suitable. You can always get hold of products of the required size in any tire workshop.

Using tires of different sizes, you can make original multi-level flower beds, which will become spectacular decoration front area or recreation area on suburban area

How to make a flower bed from a tire: from simple to complex

The easiest option for arranging a floor flowerpot from car tire- creation of a flower garden from a car tire, in which the lateral rubber surface was cut off and filled potting soil.

It will take no more than half an hour to make such a flowerpot. It is easy to decorate the outer sides of the flowerpot by painting the surface with oil paint in various shades

But to make an original flowerpot on a leg, bordered with a fringe, or decorated in the form of a large flower, it will take a little more effort.

A flowerbed of tires with your own hands can look like a flowerpot with smooth edges or a bowl with a wavy cut line, or even an outlandish flower framed with curly petals

Before making a flower bed out of the wheel, you need to thoroughly clean the base. Dirty car wheels are cleaned of sand and dirt. This procedure is necessary in order to facilitate the work in the future: the saw blade or knife becomes blunt much faster when cutting edges on dirty material.

Drawing a contour line and making cuts

Having determined the shape of the future flower bed of tires, it is necessary to apply a contour to the side of the prepared tire using chalk or a marker, along which the cut line will subsequently be drawn.

When planning to arrange a flowerpot in the shape of a flower, the contour of the petals should be applied in such a way that the size of each of them does not exceed 12-15 cm.

If you make petals bigger size, then after turning the tire out, the flowerbed may not accept the desired round shape, but will have angular cut joints.

To make cuts, you need to prepare a well-sharpened boot knife. It is possible to increase the sliding of the knife blade during the cutting process by lubricating its surface liquid soap... The use of a jigsaw will help to significantly facilitate the cutting process, with the help of which it is convenient to perform any curly sawing.

All cuts are made on soft rubber, the border of which is a metal cord located under the tread inside the tire

Reversing the tire

For arrangement decorative flower beds on a stable leg, it is necessary to turn the prepared tire with cut edges inside out. The process of turning the wheel out is one of the most laborious stages of work, and for many craftsmen it often becomes a real stumbling block. Knowing a little trick will help to cope with this difficult job: you need to make every effort and turn out only a small part of the tire inside out, and then the work will go like clockwork. The tire is turned over with cuts down and laid on a flat surface. The part of the tire, where the rim goes into a hard tread, is pressed with the foot, and the rubber is turned out at an angle of 45 degrees from the center outward.

One of the examples that clearly demonstrates the process of turning a wheel.

How to paint a flower bed from a wheel: design options

The pot is almost ready. It remains only to correct the shape of the edges and arrange it in the same style with other elements. landscape design... Until the outer walls of the turned-out floor flowerpot are covered with a layer of dust, they must be painted. For these purposes, you can use enamel, oil, or nitro paints. A layer of paint applied to a clean, degreased surface will last for more than one season. To decorate the flowerpot, you can also use the remnants of car paint in aerosol cans, which can be sprayed on the side walls and the leg of the flower bed in just a few minutes.

It is advisable to paint not only the outer part of the flowerpot, but to "capture" the top 10-15 centimeters of the inner surface.

When decorating a flower bed, it is better to use paints. light shades which will partially reflect the sun's rays, preventing overheating of the soil in the container

The colorful flower beds, painted in contrasting shades and decorated with outlandish patterns, look original.

Glued glass pebbles, which outwardly resemble frozen dew drops, can become an unusual addition to the ornament. But when decorating flower beds, you should not be too zealous, since the planted climbing and creeping plants will cover most of the walls of the flower bed.