How to glue ceiling tiles: step-by-step instructions. Ceiling tiles - how to glue correctly

The choice of adhesives is quite wide. Let's focus on the main ones

Water based adhesive

Reliable and durable. The composition includes natural ingredients - cellulose and bone glue. Eco-friendly. But it can cause bacteria to grow under the tiles. Before use, the surface must be treated with an antibacterial agent.

Solvent adhesive

Solvents are required to create it. Dignity - in quick drying. However, this quality also creates difficulties in laying tiles.

Adhesive compound

When cooking, it is important to strictly follow the proportions. Contains polyester or epoxy resins. It is very convenient to glue tiles with it. The disadvantage is that it Expensive.

Hot melt adhesive

Its installation technology requires high temperatures. Not available for those new to construction.

Liquid Nails

The best option if you have not yet decided how to glue foam ceiling tiles. Allows you to glue the coating to ceilings with serious irregularities. Buy better white, since the adhesive seams may show through.

How to remove ceiling tiles from a ceiling

You decided to update the ceiling that already existed finished with ceiling tiles? The question arises how to remove it.

Start with corner of the room, try to pick up the edge of the plate with a metal spatula. If the tiles come off easily, then nothing additional needs to be done. If it breaks off in pieces, use a hammer and chisel.

To remove ceiling tiles from the ceiling, you will also need a step ladder and an anti-fungal ceiling solution.

If you need to quickly and inexpensively tidy up your ceiling, pay attention to foam or polystyrene tiles. If you approach the matter correctly, you can get a very decent result. We will talk further about how to glue tiles to the ceiling correctly, what to use for this.

Kinds

If you look closely, despite all their similarities, the ceiling tiles have significant differences. It's not about design and form, but about appearance- density, surface smoothness and other “trifles” on which the appearance and service life of this type of finish depend. This is explained by the use different materials and technologies:

The easiest way to glue and care for extruded polystyrene tiles. The second in quality is injection, and the most “capricious” in maintenance and installation is stamped. Now you can choose the type of tile yourself, but the appearance remains.

Ceiling tiles are most often produced in the form of squares with a side of 5° cm. There are non-standard options- rectangular. Depending on the type of tile surface, there are edgings that form a clear seam at the joint, and there are seamless options. The edges of seamless slabs can be smooth or curved.

Types of design - with edging, seamless

The principle of gluing does not change depending on the type of edge, only the appearance of the product changes. Design options for this type finishing materials so many. There are geometric, floral, without a pattern, and with a variety of relief. In general, there are a lot of options.

Calculation of quantity and features of choice

Before gluing tiles to the ceiling, you need to calculate their quantity. It is not difficult. Most often it is produced with a side of 50 cm. This means that for 1 square meter there are 4 tiles. If you know the area of the room, you can easily determine required amount tiles: multiply the area by 4. For example, the room has dimensions of 3.2 m * 2.8 m. The total area is 8.96 m2. Round up, we get 9 m2. To calculate the number of tiles, multiply by 4: 4 pcs * 9 m2 = 36 pcs. Some more trimming will be required, some may be broken. Therefore, we increase the total quantity by several pieces. How much exactly - you need to look at the layout, but usually 10-20% of the reserve is enough.

To make ceilings made of foam plastic boards look beautiful, when choosing a material, pay attention not only to appearance and type. Carefully evaluate the geometry: all tiles should be the same size, the same thickness, and the angles should be exactly 90°. The quality of the drawing should be stable, clear, there should be no sagging or inhomogeneities on the side edges. If you choose pressed slabs, pay attention to the “grain” sizes. The smaller it is, the better.

What to glue on

Most often, ceiling tiles are glued using glue such as “Titan”, “Naset”, “Moment” or liquid nails. All of them are not bad, but using them requires holding the tile for some time. You have to hold it from 3-5 seconds to several dozen, and this is not very convenient. “Moment” “sets” the fastest, but it is not ideal: you have to leave the applied glue in the air for some time.

In addition to these compositions, there are mastics for ceiling tiles. They are sold in small buckets and are a paste. Work with this view adhesive compositions easier because they are more “sticky”. The tiles smeared with this composition stick to the ceiling; they do not need to be held for as long as those smeared with regular glue.

All of the above options are for flat or almost flat ceilings. Where there are differences (joints of slabs) this method is not suitable. If the ceiling is uneven, you can glue the tiles on gypsum putty) or Perlfix glue. The starting or finishing composition depends on the required layer, the finish is suitable if the height difference is no more than 5 mm, with a larger layer take the starting composition, but it is better to pre-level such a ceiling or use another system (for example, it is also inexpensive and quick way tidy up the frankly crooked ceiling).

Both of these materials allow you to simultaneously level the ceiling and glue ceiling tiles. Only the gluing method changes, and radically (more on this below).

Preparing the base

Before gluing tiles to the ceiling, the surface must be prepared. First, we remove everything that can fall off. If there is a significant layer of whitewash on the ceiling, it is better to remove it - although the ceiling tiles weigh little, over time they can fall along with the whitewash. Therefore, we clean it dry with a spatula or wash it off with water. If large “craters” are formed during the cleaning process, it is better to seal them. It is easier to use starting putty or the remains of any plaster composition for this.

If the base is loose, free-flowing, you cannot do without a primer. For concrete it is better to choose “concrete contact”, for a gypsum base - any deep penetration composition. After drying, you can begin gluing polystyrene or foam tiles to the ceiling.

Placement methods and markings

Squares on the ceiling made of foam plastic or polystyrene are placed with their edges along the walls or diagonally. When gluing diagonally, the material consumption is greater - there are more scraps and not all of them can be used, but visually it looks better - it is more difficult to notice the seams.

Gluing most often starts from the chandelier. In this case, it is easier to “fit in”, since the edges of the plates can be trimmed a little, and the resulting gap will then be closed by the chandelier socket. But not all rooms have a chandelier - often there are several lamps and they can be located on the walls. Then they start gluing from one of the walls, most often from the one opposite the entrance. With this approach, most likely the outer row will be cut off, and it will not be so noticeable near the entrance.

If you need to glue tiles to the ceiling from a chandelier, markings are necessary. IN square room It’s simple - we find the center and start from there. To do this, take a painting cord, one end in one corner, the other in the opposite corner, pulling the cord and letting go, we get a line on the ceiling. We repeat the operation with another pair of corners. We found the center, it’s easy to glue tiles from it. For diagonal gluing, there are already guides, but for parallel gluing you will have to make two more stripes - through the center to opposite walls(in the picture above).

But this is a very rare case. More often the rooms are rectangular, and the chandelier is not located in the middle of the ceiling. Therefore, you will have to do more complex markings.

To begin with, we also find the center of the room (painting cord along the diagonals). If it coincides with the place where the chandelier is attached, great, we’ll “dance” from it. If not, move the starting point to the chandelier. The rest of the markings are the same. We measure the distance from the starting point of installation to the nearest wall. Using this value, draw squares as shown in the picture above (use painter's cord). By drawing the diagonals, we get guides for laying continuous tiles. Using them we level the edge of the first row. The more accurately we set this row, the easier it will be to glue the tiles onto the ceiling further.

How to glue tiles to the ceiling: two technologies

Foam or polystyrene ceiling tiles are attractive because they allow you to quickly and inexpensively put things in order. perfect ceiling. If the ceiling is relatively flat, the tiles are glued with special glue. It is applied in a thin layer, but provides reliable fixation.

This method will not work with uneven ceilings: the tiles simply will not stick if there are large differences, or the appearance will be deplorable. There is not always time, desire or opportunity to level. Moreover, this finishing option is often considered as temporary, planning to then do or. Therefore, there is no point in wasting time and money. In this case, another technology is used - using adhesive for drywall or putty. They work no worse than glue, at the same time leveling the base.

Before starting work, unpack all the material, make sure it is the same color and size. If there are irregularities or sagging, they are cut off with a blade or sharp knife. Now you can begin installing the ceiling tiles on the ceiling.

How to glue on a flat ceiling

If the ceiling is flat, use regular adhesive for polystyrene or foam tiles, the technology is as follows:

As you can see, everything is very simple and these are all the rules on how to glue tiles to the ceiling. Just one caveat: you need to press one square to another tightly. If you have already glued it and there is a gap left, you can move it by pressing a wooden strip to the free edge. If you try to do this with your hands, you can break the foam or polystyrene, but it’s easier to achieve what you want with a flat bar.

If the ceiling is uneven

If the ceiling has significant unevenness, gluing the tiles with regular glue will not work. To remove significant differences, use drywall adhesive or putty. The mixture is diluted to a paste-like state, applied to the ceiling, and grooves are formed using a notched trowel. The amount of glue depends on the overall curvature, but it is advisable to start with a minimal layer. The area on which glue is applied at a time is approximately 4 fragments. During this time, the composition will not have time to set, and leveling such a fragment is not difficult.

The tiles are laid on a layer of glue. It sticks well and moves without problems. Having aligned the edges of the laid fragments, take the rule or building level(preferably one and a half meters) and place the tiles in the same plane. Just press the fragments harder in the right place.

Then the composition is applied to the ceiling again, and, again, to about 4 tiles. All of them are set in the same plane, or at least so that there are no sudden changes. Only in this case you need to make sure that the required layer of glue does not grow too quickly - it is better not to apply more than 3-5 mm, otherwise everything will fall.

Cleaning and caulking

You know how to glue tiles to the ceiling, but there are still some nuances, without knowledge of which a decent result is unattainable. When working, adhesive often gets on the front side of the tile. It must be removed immediately and completely. You can use a sponge or a soft, non-fading cloth. Wipe the surface immediately after placing the fragment in place. After just a few minutes, this will no longer be possible and traces will remain. Therefore, while working, keep a bucket of water and a sponge/rag on hand.

If there are small voids left between the slabs, you can fill them with the same mastic or putty (if it is white), but immediately remove the excess. Another option is white acrylic sealant. It perfectly masks all crevices and adheres well to polystyrene foam and polystyrene. You can fill thin cracks with a rubber spatula, and immediately wipe off any excess with a damp cloth.

Expanded polystyrene tiles are one of the most popular types of ceiling coverings. Therefore, the question of how to glue ceiling tiles is of interest to many novice craftsmen who plan to do the finishing work with their own hands.

How to choose tiles for finishing the ceiling?

Great popularity of this decorative material due to its following advantages:

simple installation - anyone can handle gluing tiles;
easy care - foam tiles can be washed with any non-abrasive product;
the ability to hide small defects in the base;
speed of finishing - a small base (for example, a ceiling in a bathroom) can be easily completed in a few hours;
low cost - prices for ceiling tiles are quite low, so everyone can afford such finishing.

For successful execution repair work you need to answer 3 questions:

how to choose facing material so that it lasts for many years;
how to glue the selected finishing option so that it does not fall off;
how to properly glue ceiling tiles so that the ceiling is not only reliable, but also attractive.

On domestic market Ceiling tiles are presented in a wide range. Various models They differ from each other in color and texture, production technology, geometric dimensions, quality of polystyrene foam and cost. Therefore, before gluing tiles to the ceiling, you need to choose the right finishing material.

According to the production method, ceiling tiles are divided into 3 types:

Injection. It has low density and, accordingly, strength, which is why it costs less than other types of finishing. Its thickness is no more than 14 mm. Such tiles are produced by sintering foamed plastic, which is why they are called foam tiles.
Stamping. It is characterized by a denser structure and mechanical strength. The thickness of the product is 6-8 mm. It is made by pressing polystyrene foam at high temperatures.
Extruded. It is the most expensive and highest quality tile. With high density and strength, its thickness is about 3 mm, which allows you to save extra millimeters of free space during finishing. During the production process, the tiles are covered with a laminated layer, which not only improves its appearance, but also protects it from the harmful effects of moisture. This allows the material to be used in rooms with high humidity(bathroom, kitchen).

By selecting suitable type product, its color and pattern, you need to check the quality of the material and its geometric dimensions. The first step is to inspect the edges of the sheets - they should be dense and consist of small granules. The smaller the granules, the better. Then the strength of the material is checked. To do this, you need to take one element from the selected batch by the edge and shake it a little. If at the same time it does not deform or break, then its quality is good.

Each tile must have the correct geometric dimensions. For example, if it is a square, then all the edges should be the same length, and the corners should be 90°, that is, they should not be rounded or flattened. Only in this case will you be able to finish the ceiling without seams.

Choosing adhesive for ceiling tiles

When answering the question of how to glue ceiling tiles, one cannot ignore the glue, which is the connecting link between the base and the finishing material. The adhesive composition for ceiling cladding must have the following properties:

strength and reliability;
quick setting;
good adhesion;
environmental safety;
the ability to lay down both thin and thick layers.

If everything is more or less clear with the first four points, then we need to dwell a little on the last one for clarification. Most old-style apartments do not have flat ceilings; they can have height differences of more than 15 mm. How to finish in this case? There are two ways to get out of this situation: level the ceiling before cladding or use glue, which can be applied in a thick layer. The first option is not optimal, since it requires additional financial investments from the contractor. That's why the best option is to apply the adhesive composition in a thick layer, thereby simultaneously leveling and finishing the ceiling base.

Gluing tiles on flat ceiling can be produced using adhesives such as liquid nails, Moment, Eco-naset or Titan. They have excellent adhesion to any coating, be it plaster, wallpaper or other material, and fast drying time, which makes it much easier installation work.

What should I use to glue foam tiles to an uneven ceiling? In this case the best option stands ordinary putty and tile or drywall adhesive. These compounds can be applied in a layer of up to 40 mm, thereby leveling even large differences in height.

Preparatory work

Any repair process begins with preparatory work. And finishing the ceiling with tiles is no exception in this regard. Before gluing this material, you must do the following:

choose a laying scheme;
calculate the required number of tiles;
prepare the ceiling for finishing.

Exist different ways placement of tiles on the ceiling relative to the walls, the most popular are (Fig. 1):

in rows;
in a checkerboard pattern (with a shift);
diagonally.

Each installation option allows you to create a specific pattern, the best way suitable for a specific design idea.

To calculate the required amount of finishing material, it is necessary to make drawings on a sheet of checkered paper at the selected scale, which indicate the dimensions of the room and the layout of the tiles. It should be taken into account that standard sizes ceiling tiles are 50x50 cm. You can start laying from the center of the room or from the wall opposite the window. If there is a chandelier in the center of the ceiling, then it is recommended to start finishing from there (Fig. 2).

After this, the number of intact tiles and the number of elements that will be cut are calculated from the drawing. If there are gaps near the walls, the width of which will be less than the width of the tiles (less than 25 cm), then in this case 1 element will be used to cover two rows. If the size of the gaps is more than 25 cm, then you should buy tiles at the rate of 1 piece per 1 row.

How to glue tiles so that they don't fall off over time? To do this, it is necessary to properly prepare the finishing surface. First, the ceiling is cleared of poorly adherent old decoration and treated with a deep penetration primer. If the base has deep cracks and chips, they should additionally be repaired with putty. It is recommended to prime a ceiling made of chipboard or plywood before finishing. special mixture with abrasive additives that increase the adhesion of the material. After the primer has dried, gluing can be done.

How to beautifully cover a ceiling? First you need to correctly draw the finishing base and mark its center. To do this, take two cords that are pulled diagonally from opposite corners. The point of their intersection will be the center of the room. Then they retreat 25 cm from this point (half a tile) and draw lines along which the first element will be glued.

DIY tile gluing

Before gluing the tiles, you need to prepare following tools and materials:

stepladder;
spatula if a drywall mixture or putty will be used as glue;
roulette;
stationery knife;
mounting gun;
tiles;
adhesive composition;
white sealant.

How to apply adhesive to tiles depends on what composition will be used. If gluing will be done using putty or cement mixture, then the glue is applied pointwise so as not to increase the weight of the finishing material. If you plan to use “Titanium”, liquid nails or another similar composition, then it is applied along the entire perimeter of the tile with a thickness of 20-30 mm, and a small spot is also made in the center.

After applying the glue, you need to leave the tiles alone for a few minutes so that the glue dries a little. After this, the finishing material is applied to the ceiling according to the markings and pressed with uniform force over the entire area. Before installing each subsequent element, it is applied dry to its place to see how it will lie and whether it will spoil the design. If necessary, the tiles in the last row are trimmed with a stationery knife on a hard surface. At the last stage finishing works The ceiling plinth is being glued.

Before gluing the tiles, all windows and doors in the room must be closed to prevent drafts, because they negatively affect the strength of the adhesion.

If for some reason small cracks have formed in some places, then you should not be upset, as they can be sealed with white sealant. After the sealant has dried, it will need to be painted over.

There is nothing complicated about gluing ceiling tiles. The only thing that can cause difficulties is marking the ceiling, since it must be done as accurately as possible. If everything is done correctly, the ceiling, finished with your own hands, will look no worse than if the installation work was carried out by a repair team.

Every consumer today can choose the finishing option that he likes and that suits the price. The possibilities are limited only by the amount of money. Ceiling tiles - inexpensive and beautiful material, which you can also stick on yourself.

Expanded polystyrene tiles may have different design. It can be smooth or with relief pattern, tinted or white, regular or special (seamless). Despite easy installation, it still doesn’t hurt to familiarize yourself with the rules on how to properly glue ceiling tiles so that the result will please you for many years.

Advantages of polystyrene foam tiles:

low price with a beautiful appearance, as in the photo;
ease of installation;
high water resistance;
lightness, which allows you to glue tiles not only on concrete ceiling, but also on drywall;
easy care– dust and other contaminants can be easily removed from the surface.

Ceiling tile production technologies

Expanded polystyrene tiles, depending on the manufacturing technology, have different performance qualities and external characteristics.

The thickness of tiles produced by the stamped method does not exceed 8 millimeters. This material has good geometry, but the pattern is not raised enough. The main advantage of such tiles is their low cost.

The material created using injection technology has a thickness of 9-14 millimeters. The design of such a product is embossed, clear, and respected geometric shape. Most of the tiles that allow you to create a seamless coating are produced using the injection method.

Extrusion technology makes it possible to produce dense and finely porous tiles. The material is smooth and can imitate various natural materials.

Selecting a quality product

When purchasing, many pay attention only to the appearance, and then wonder why the coating soon begins to deteriorate.

To prevent this from happening, you need to know the signs of quality material:

smooth and clear relief over the entire area of the tile;
small, equal-sized polystyrene foam grains; there should be no signs of shedding on the side sections;
straight, even corners, a clear geometric shape - it is impossible to properly join tiles with dented corners.

As for the best way to glue ceiling tiles, it is advisable to choose an adhesive designed specifically for polystyrene foam.

Preparing for work

To glue the tiles you will need the following tools:

level;
ladder;
square;
pencil;
leg-split;
meter ruler;
a construction or stationery knife with break-off blades.

When purchasing, you need to know exactly how much material you will need, since it is better to purchase tiles from one batch. Products from different supplies may differ slightly in color and size. In order to determine the required number of tiles, measure the length and width of the room. These values are multiplied to obtain the ceiling area. In the store, on the packaging of the tiles, they look at the area it is designed for. Next, the ceiling area is divided by the specified value and the number of packages is obtained. But since during work it may be necessary to cut the tiles, and defects are also possible, it is better to take 10% more material than needed.

Surface preparation

We glue the ceiling tiles with our own hands only on a previously prepared surface. First of all, you need to remove the old coating. If the ceiling was previously also decorated with ceiling tiles, the work ahead will be quite labor-intensive. To remove the tiles, you need to pry them off with a spatula and clean off the glue remaining on the ceiling.

Next, the surface is inspected to identify various defects. Irregularities and cracks must be puttied. The leveled surface is coated with a primer. Thanks to this, the glue will have better adhesion to the ceiling tiles. It is especially important to carefully prime the plywood and wooden floors, otherwise the product will not hold up well.

Marking

Before you start gluing the ceiling tiles, mark the ceiling. To do this, you need to decide on the type of arrangement of the tiles, for example, parallel to the wall or diagonally. Laying usually starts from the location of the chandelier or from the center of the room.

The markings are made using twine. One end of it is fixed in one corner of the room, the other in the opposite. The same is done with the other two corners, resulting in the room being divided diagonally. A right angle is formed where the cords intersect. Markings are applied along the cords with a pencil, and the first tile is laid at the intersection. This is how the ceiling is marked before gluing the ceiling tiles into a diamond shape.

It often turns out that the chandelier is not located exactly in the center of the room. In this case, the markup is done a little differently. Two lines are drawn through the mounting point of the chandelier, perpendicular to each other and parallel to the walls. The resulting right angles are divided in half and these lines are drawn to the intersection with the walls. The result is a point from which to start gluing the ceiling tiles, as in the previous case.

How to stick tiles

Glue the tiles as follows. Glue is applied in dots to the back side of the product, in the center and along the perimeter. The first tile is laid at the intersection of the lines so that its edges coincide with the markings. Two perpendicular rows are drawn from the first tile. Subsequent tiles are glued relative to the first, with the sides aligned to the nearest millimeter (more details: " "). Even small irregularities will cause the resulting coating to be imperfect. At the junctions of the ceiling and walls, you usually have to glue cut tiles.

Many people are interested in how to glue. In order to create a coating without seams, you need a special tile, on the back of which there are markings with triangular arrows. They indicate how the products should be positioned relative to each other. Glue the sheet so that all the arrows point in the same direction.

If we glue the ceiling tiles onto the whitewash, starting from the place where the chandelier hangs, and not from the center of the room, then the corners of the adjacent tiles are cut off in order to lay them near the fasteners (read: " "). Don't worry about this empty space - it will later be covered by the chandelier's cap.

Despite the wide variety of finishing materials, ceiling tiles are still popular. Such love on the part of modern consumers is ensured by the affordable cost, as well as the ease of installation of this ceiling covering, which I would like to talk about in more detail in this article.

How to glue ceiling tiles, what materials may be needed, how long it will take to complete the work - these are the questions that most often concern those who want to cope with gluing on our own.

Deciding on tiles

In this matter, you should be guided solely by your taste preferences. Indeed, with the help of seemingly simple ceiling tiles, you can achieve any desired effect. Laminated tiles are extremely popular. It has a denser texture, a glossy surface, and can also be cleaned and washed, which every housewife will appreciate. With the help of such tiles you can decorate the ceiling not only in the room, but also in the kitchen and even in the bathroom.

Moreover, modern manufacturers They offer a wide color palette of tiles, so everyone can find the option that matches their idea. If you want to emphasize your own individuality, then before gluing the tiles to the ceiling, be sure to take the opportunity to paint the tiles water-based paint. She gives whole line undeniable advantages: firstly, you get the shade that you need, and secondly, you develop your Creative skills.

Apply glue

Now, as for physical characteristics the tile itself. Be sure to pay attention during the selection process Special attention at the corners, they should be exactly 90 degrees. Only in this case will you be able to carry out installation work quickly and efficiently. Moreover, none of the corners should be jammed. That is why, during the purchasing process, check each package of tiles to avoid unpleasant consequences.

If you decide on a polystyrene tile with large grains, then make sure that its edges do not fray or break off, otherwise the process of working with such material will turn into real torture for you. Remember that the material is fragile and be careful when transporting it.

And, of course, if there is a pattern on the surface of the tile, then it must be clear, otherwise this seemingly small flaw on the overall canvas will attract attention and be conspicuous.

Spread the adhesive over the tiles

Preparatory work

Before you start gluing ceiling tiles, you should carefully. To do this, you need to remove the old coating. If it is whitewash, then you will have to wash off all the layers. The fact is that the result of the work associated with transforming your room largely depends on how thoroughly you remove the whitewash from your ceiling.

Before gluing ceiling tiles to a cleaned surface, take care of the soil. can be purchased at any specialty store. Using ordinary paint roller and an extension for it, it is recommended to cover the ceiling with several layers of primer.

If washing off whitewash is very tedious for you, then you can use a construction product. With its help, you will have to scrape off the whitewash layer, and then also go through a layer of primer.

Ceiling markings

On at this stage work, you need to clearly determine how the tiles will be located on your ceiling. In fact, today there are many ways and variations of gluing polystyrene tiles. However, the simplest is to install the tiles parallel to the walls; less often, the tiles are placed diagonally.

If you cannot decide how to glue the ceiling tiles, then choose the easiest method. Your starting point should be the center of the ceiling. This is usually where the chandelier is installed. Moreover, special importance should be given to the first rows, since the entire result of the work you perform depends on how even they are.

You can start fixing the tiles from the center

Apply glue to the tiles

How to glue tiles to the ceiling? Of course, using construction glue. Today, a sufficient range of adhesive compositions is offered to consumers. It is advisable to use special adhesive for polyurethane foam tiles. It will not only ensure reliable fixation of the coating on the ceiling, but will also not damage the texture of the tile, which quite often happens when using, say, “ liquid nails» wide range of applications.

So, it is recommended to apply the glue pointwise and let it sit for 5-7 minutes before laying. During the installation process, it is important to pay special attention to the edges of the tiles. Considering that the material from which it is made is quite fragile, the edges may look very careless and crumble, which will certainly affect the appearance of the finished surface.

The first tile must be glued so that one of its corners is at the central point of your ceiling, which you managed to determine using the correct markings. And one more thing: it is important to press the tiles firmly against the ceiling, but this should be done very carefully to prevent the formation of dents on its surface. All subsequent tiles must be glued parallel, trying to leave minimum clearance. If excess adhesive is formed during the gluing process, it should be immediately removed from the surface of the tile.

You can install tiles diagonally

We eliminate existing cracks

If until today you didn’t know how to glue ceiling tiles with your own hands, then you probably didn’t even think about the possibility of cracks forming. Yes, indeed, this happens, especially with beginners.

If you don’t want to face this problem, then purchase seamless tiles that create a perfectly flat and smooth surface. Although we must admit that this type of polyurethane foam tile is quite expensive.

So, as for the cracks that have formed, you can get rid of them using construction sealant. It is advisable to use silicone sealant, since it is resistant to moisture and temperature changes.

Final touches

So, now you know everything about how to stick tiles on the ceiling. All you need to do is remove all excess glue, cut a hole for ceiling chandelier using a construction knife. In this case, remember that it is not at all necessary to cut the hole with extreme precision and extreme care, because it will be covered with an overlay. This hole is primarily intended for releasing wires, so it should be quite small in size.

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!