The modern rhythm of life has taught many people to be crowded and crowded. It is not surprising that immediately after buying a summer cottage or a frequent cottage, people strive to isolate themselves from the reality around them as soon as possible.
It is not surprising that many are thinking about what is cheaper to make a fence from. The question is not idle at all: the cost of building materials only increases every year, so everyone wants to somehow save some money. Of course, you need to cut costs wisely, since quality should not suffer greatly. In this article, we will consider several options for how you can save on building a fence near your country house.
Wood
Of course, this is the first option that comes to mind. In principle, everything is correct: wood is relatively cheap, there is almost everywhere, and it is relatively easy to process it. But everything is not as simple as it seems at first glance.
Option one - a wooden picket fence. It costs about 500-1000 rubles per cubic meter (depending on the area), and sometimes it can even be bought for a penny. As a rule, it is a departure from the production of edged and unedged boards. Almost always made from conifers wood.
Advantages - low price, availability. There are many more disadvantages. So, the quality of the picket fence is very, very low. Of a dozen veins, more or less straight lines sometimes turn out to be no more than half. There is no need to talk about protruding knots, chips and resin drips.
In addition, it is simply unrealistic to make a solid fence out of a picket fence, since you still will not achieve a snug fit of individual boards. If you nevertheless decided to save money and use this material, then first, be sure to check its loading. Don't settle for buying questionable products. It is better to choose the poles from hardwoods (but not from poplar!). Be sure to treat their end parts with antifungal and anti-decay compounds. Of course, this also applies to the area that you will dig into the ground.
Board
By the way, what is it cheaper to make a fence from: from picket fences or from unedged boards? Of course, at first it may seem that the croaker is out of competition, since it is clearly cheaper (at least twice). But this is only at first glance.
Yes, an unedged board can hardly boast of a first-class appearance. But everything is fixable! If you have something attractive appearance you will attach the boards in a couple of hours. In addition, a solid fence can be made of this material, and one board overlaps where large area rather than a croaker. So what kind of fence to make?
Thus, it is more profitable to make a fence from unedged material. Of course, provided that you have a tool for processing it. If you treat wood with anti-rotting compounds, then such a fence can serve you for a very long time. So, the ends of the pillars are best treated with molten tar and wrapped with roofing material. The cost of these materials is cheap, but the benefits are great.
All of these options have one, but very significant, drawback. The fact is that in the classic version, the veins are attached to pillars buried in the ground. In most cases, people simply do not think about processing the latter with some kind of protective compounds, as a result of which the tree rots literally in a year or two. Not too economical ...
So what is cheaper to make a fence from?
Wooden pallets
This option is suitable only if you are not able to purchase other material for the fence. Surely almost everywhere there is an opportunity to get pallets that are used to transport bricks, packages of frozen meat and fish, as well as other goods. They can be found near wholesalers and other retail outlets.
Attention!
Typically, about 60-70% of these pallets are made from waste materials, but sometimes you come across those for the manufacture of which high-quality boards and other lumber were used. They are what you need to look for. We warn you right away that it is difficult to disassemble such structures: they are often used there. assembly nails(with a screw thread), and therefore the boards often break and split when trying to remove them.
But if you manage to "pick" the amount you need for the fence, then in the end you will receive free material for the fence. Its quality is not very good, but you will not pay money for it either!
Another non-standard option
If there is a wood processing plant somewhere nearby, you can find the core of a birch there. The material is non-standard, but very high quality and cheap. In conversation, he is often referred to as a "pencil." The width of each stem is about six or seven centimeters, and they reach a couple of meters in length. One cubic meter fits almost 350 of these "planks". From the core of birch, a very beautiful and durable construction... Here's how to do beautiful fence!
Metal posts
In this case, you will spend a little more on expendable materials, but the construction itself will last many times longer. The cost of one column of industrial production from a round profile starts from 600 rubles. If you take the aforementioned picket fence as the main material, then you can build a fence for quite reasonable money.
Galvanized metal
You can make a fence from corrugated board. To do this, you need to buy all the same metal posts, profile 40x25, as well as the cheapest galvanized metal of these brands: MP20, C21, C8. We recommend buying the C8, as it is the widest: you will need a lot fewer sheets to cover the entire span of the fence. We dig in or concrete the posts, fix transverse profiles, fasten the galvanized metal with self-tapping screws.
What about the costs? To calculate the required amount of material, you will need to perform a few simple mathematical calculations: first, the length of the fence should be divided by three (this is how the required number of pipes is calculated). Next, we divide the length of the fence by 1.15 (width C8), after which we get the required amount of metal.
The cost of such a fence will be about 1.5 times more than the options described above, but its appearance and durability will be much better. Alternatively, you can simply buy zinc-plated metal classified as scrap. It costs much less, and its quality is slightly worse than ordinary products.
Asbestos cement and other tricks
How to make sure that the cost of the fence does not differ too much from the wooden one, and the reliability is not inferior metal structure? There is such an option. We take asbestos-cement pillars of the BNT brand 100 * 2.95 m, the cost of which does not exceed 200 rubles per piece, we bury them one meter into the ground. We fill the columns with sand or ASG, we make fasteners for the veins. As a material for the fence itself, you can use a picket fence, unedged board or disassembled wooden pallets.
Mesh chain-link and metal corner
If you want to make a fence with your own hands, but do not want to mess with boards or galvanized metal, we offer you this option. Of course, a metal mesh today costs from a thousand rubles per square meter, so this option of a fence cannot be called cheap. However, you can buy a plastic version of it, which costs many times cheaper.
But doing it is simple: you dig in (or better, concrete) metal corner, to which veins from reinforcement are welded in several places. The mesh can be fixed using either spot welding, and with the help of a knitting machine (with which the reinforcement for the foundation is tied).
So we have taken apart all the materials from which you can make a fence in the country. But the article would not be very informative if we ignored the methods that should be used when constructing such structures. That's how the chain-link.
Since we have already repeatedly said that the longevity of any fence is primarily influenced by the pillars used in its construction, now we will discuss their correct installation. If you cheat on this issue, then you simply throw your money and labor to the wind.
First, it is very important to correctly mark the place where your fence will be located. We drive in the pegs along the border, after which we pull the cord tightly between them. If you plan to make a monolithic foundation, carefully dig in the boundaries of the future foundation. In the case when it is not planned to do it, the twine should be stretched for the entire period of work. As a rule, the pillars themselves are dug in at a distance of two to three meters from each other.
For the foundation, it is enough to dig a small groove, the depth of which will be about 30-40 cm, and the width - no more than 20 cm. At the bottom we pour a layer of sand about eight centimeters, after which we carefully tamp it. A similar layer of rubble is poured next, after which everything is carefully rammed. If you have unnecessary pieces of metal on hand, then you should not dismiss the creation of a reinforced frame.
The pits for the posts should be much deeper than the trench for the foundation of the fence. Those of the columns on which the wicket or gate will be hung, it is preferable to bury at least one meter in the ground. We also pour crushed stone and sand at the bottom of the holes, ram them. We make wire reinforcement in which we install the posts. After that, you can fill the pits with concrete.
How to properly mount the fence
After installing the pillars that have been pretreated with antiseptic solutions, you can proceed to the installation of the canvas. Here you can do the job in two ways at once. In the first case, the veins are first attached to the posts, and only then pickets or other material are nailed onto them. In the second case, first, slats are attached to the finished veins. In this case, the finished canvas only remains to be fixed on the pillars.
In the first option, you can do all the work alone, while the second method requires a helper (or better than two). As soon as you put up the fence, its canvas should be carefully treated with stain or drying oil. After these compounds have dried, various decorative elements can be attached to the fence.
Thus, it is quite possible to make a beautiful, functional and durable fence from inexpensive materials available in every household. Of course, brick or metal fence it looks much more impressive, but even the simplest picket fence perfectly fulfills its main functions.
So we found out what is cheaper to make a fence from!
Today, a person who has decided to build a house on his own must be prepared for significant costs. Most of the money is most often spent on the foundation and laying the walls, but in most cases you have to spend significantly on things that at first glance seem not obvious. It's about the fence.
The prudent future home owner is determined to save on such details. In addition, this is a completely justified and feasible solution.
A key way to keep your fence costs down is to do it yourself. Do not underestimate the importance of this process, since the fence is not only a decorative structure that hides the area from prying eyes, but also a protective fence designed to prevent suspicious persons from entering the site.
In other words, the structure must be reliable, durable and aesthetic. Only under such conditions will it satisfy all the requirements imposed on it. In our case, simplicity of installation should also be added to the list to the conditions.
Materials for building a fence
There are several basic materials that allow you to build an inexpensive and functional structure:
- wood;
- Rabitz;
- corrugated board;
- plastic.
The main limiting factor in the construction technology and the combination of materials is financial costs. First, you should choose the material that will become the basis for the fence, then find a suitable economical construction technology, and then make the basic calculations.
Wooden fence: pros and cons
Modern hardware stores offer a large number of wood options suitable for construction reliable design... This material has some advantages over others, which makes it almost the most popular product.
Advantages of wooden structures:
Disadvantages:
Materials for installing a wooden fence
To build a standard fence made of wood, you will need materials such as: picket fence, transverse boards, support posts, pegs, ropes, cement, sand, shovel, saw, fasteners, special tool against wood decay.
It is best if the entire set of tools is collected in one place within reach for easy access to components.
Construction of a wooden fence
Stage 1. We mark the place for the structure, determine the location of the gate. We use pegs and rope. The distance between the posts is 2 meters. This is how the stability of the structure to external influences is ensured.
Stage 2. Take a shovel and dig holes for the support pillars.
Stage 3. We immerse the pillars in the ground by about one fourth of their length.
Stage 4. We put spacers to secure the pillars and fill the pit with cement mixed with sand.
Stage 5. We drive in transverse boards.
Stage 6. Vertically fix the picket fence on the transverse boards.
Stage 7. Paint the finished fence in the selected color.
This completes the construction of a wooden fence. This is a relatively simple fence option that is usually installed as a temporary option.
Mesh fencing is considered the most economical option available today. Among the advantages of such fences, it should be noted:
Clarifying the last point, it should be noted that installation will require tools that are easy to find in every home. In addition, modern stores offer a wide range of nets of the most different colors and sizes, which allows you to move away from the banal appearance fence.
Materials for building a fence:
For those who stick to more original solutions, exists vinyl flooring however, they have a tendency to lose color over time.
Erection of a fence from a chain-link mesh
Step 1. We carry out the markup.
Step 2. Digging holes for the support pillars.
Step 3. Place the pipes in the holes.
Mesh fence - chain-link
Step 4. Fill the pits with pre-prepared concrete mortar. In some cases, builders simply drive the pipes into the ground with a sledgehammer. This is possible provided the soil is sufficiently soft.
Step 5. Begin to fix the mesh. We fasten the beginning of the roll at the first pipe, which acts as the beginning of the future fence.
Step 6. We stretch the mesh around the rest of the supports, gradually securing it. It is important to ensure that the mesh does not sag, otherwise all work will be useless.
Stages of work in the sectional construction of the fence
Step 1. Laying the foundation.
Step 2. Construct the tensioning frame from metal corners.
Step 3. We fix the corners between the supports.
Step 4. We fasten the mesh inside the corners by welding.
Mesh fences are very easy to erect without the help of specialists, which allows you to significantly save money and try your hand.
Fences made of corrugated board
This type of fence can deservedly be called the most common. Most often it is used to fence summer cottages and private houses. To erect such a fence, you will need welding machine and a little patience. In general, the installation technology is very simple, which can be attributed to the advantages of the design.
Modern construction markets offer corrugated board different colors and sizes, so buyers shouldn't be limited in their imaginations.
As additional components, you should purchase anti-corrosion paint, support structures, logs, shovels, self-tapping screws, and also make a cement mortar.
Installation of a fence made of corrugated board
Step 1. We carry out the markup for the future fence. It is important that the distance between adjacent supports does not exceed two and a half meters. Pegs and twine are used as auxiliary elements.
Step 2. Making indentations in established locations... In the future, support elements will be inserted into these holes. This task can be accomplished using a special drill or simply dig a hole with a shovel. The depth of the pit is standardly one hundred and thirty centimeters.
Step 3. Install support pillars in the corners of the territory, and then around the entire perimeter.
Step 4. We strengthen the base of the pillars with cement.
Step 5. Install the logs, which are necessary for the further attachment of the corrugated board.
Step 6. We attach the sheets to the joists using self-tapping screws.
Step 7. We paint metal elements enamel. In some cases, a primer is used.
In the end, the fence turns out to be quite pleasant in terms of aesthetic characteristics, as well as durable and reliable. It looks much more solid than a fence made of wood or a chain-link mesh, and therefore can be regarded as a full-fledged fence.
Plastic fence
Plastic deservedly bears the title of one of the most available materials for the construction of a fence. This is a real salvation for summer residents who do not want to build expensive structures on their plots.
The positive aspects of such fences are as follows:
- strength;
- durability;
- ease of installation;
- low cost;
- nice appearance.
Installing a plastic fence
Stage 1. We carry out markings on the territory where it is planned to erect the fence.
Stage 2. We mark the places where the gate and the gate will be.
Stage 3. In the established places we drive the support pillars into the ground.
Stage 4. At the corners we fix piles made of durable metal.
Stage 5. We stretch the piles along the perimeter of the site.
Stage 6. We fix the pillars with spacers.
Stage 7. We attach the sections between the supports.
Thus, as a result of simple machinations, a beautiful and functional fence is obtained, which in its own external qualities although it cannot compete with designs from decorative stone or forged elements, but completely satisfies the owners of the territory.
This article covered the most simple ways erection of fences, the choice of which is due only to your preferences. Now you can build a cheap fence with your own hands.
Video - Construction of a wooden fence
Video - Building a fence from a mesh
Video - Installation of a fence made of corrugated board
Video - Installing a plastic fence
What is a fence for? What functions does it perform? How important is the quality of the fence to you? Is it realistic to install a fence with your own hands? so that it is cheap and beautiful?
One of the main functions of the fence is a barrage function and a security one! Remember how, not having time to acquire your country cottage area, you were immediately struck by the idea that it would not hurt to fence in and, thereby, secure your rights to the newly acquired plot. The second thought that visited you was a picture of your site, enclosed by a beautiful fence. All kinds of fruits and vegetables, flower beds quietly grew on the site - and all this without the danger of being collected by "night guests" who often make their "ruinous" visits to poorly protected areas.
Your initial wish was very correct! You should definitely put a strong and hopeful fence around your property. Whether you will be building, or will you be engaged in gardening and horticulture - the fence will protect and keep your valuables from "the eyes of those who envy" and "the hands of those who grab it."
When the decision has been made, it's time to take action! But ... on modern market a great variety of all kinds of fences! Some require considerable financial costs, others require certain knowledge, still others - experience, fourth - the neighbor has the same ...
This question is not easy to answer! Each fence has its own advantages and disadvantages. We will now try to describe in more detail the most popular fences so that each of the readers can make a choice for themselves.
By the way, if you, the reader, are not among the lucky owners of thick wallets, then this article will help you decide and put your own fence around your site! This lesson is exciting, during the installation process you will learn many new skills, learn some tricks and subtleties! Self-education is always good! An extra reason to raise your self-esteem and experience self-esteem! And a fence set with your own hands will be proof of your thrift.
First of all, fences are solid capital and decorative lattice. Some completely cover everything that happens in your yard, while others allow you to see everything, but do not allow it inside.
What are the types of fences in our time?
- Wood;
- From concrete slabs solid and decorative;
- Plastic;
- Brick;
- Net;
- From corrugated board.
Let's take a closer look at each type of fence and how to install it yourself.
Wooden fences are very popular, they are easy to install and carry renovation work... Let's take a look at the advantages and disadvantages of such a fence.
Advantages of a wood fence:
Relatively inexpensive;
A wide variety of shapes and patterns;
Easy to install, even an amateur can handle it.
Disadvantages:
Requires constant self-care (painting);
Short-lived, the service life rarely exceeds 10 years.
To install a wooden fence with your own hands, you will need the following materials and tools:
- Hammer, nails;
- Level;
- Pegs and rope;
- Posts made of wood or metal;
- Cement mortar;
- Bars wooden length 2-2.5 m;
- Fasteners made of wood of your favorite shape;
- Varnish, drying oil, paint;
- Hinged hinges;
- Gate valve or lock on the gate.
In order to purchase the material necessary for construction, you can contact any hardware store, where you can choose the shape and dimensions of the blanks you like. Most suitable size future shtapetin - 85 x 145 mm. This option is less time consuming, but more costly in terms of finance. If you want to save a little on, then contact the timber warehouse, where you will be offered a cheaper product, but requiring additional processing - a cut board. True, you will have to tinker with it a little - cut it off, walk with a grinder - but there will be an opportunity to significantly save money.
For the posts, it is advisable to use metal pipes, channels, but if this is not possible, wood processed special mixtures to prevent early decay.
Whatever material you buy, be sure to properly proliferate and dry it! The service life of your wooden fence will depend on this.
- First, mark the boundary along which your fence will run with a peg and rope. Pull the rope evenly around the entire perimeter of the future fence.
- Decide where the gate will be located, its dimensions, mark the location of the posts.
- Mark the location of your posts at a distance of 2 - 2.5 m from each other. Dig holes for posts at least 30 cm deep.
- Install and dig in the posts, while making sure to set the posts strictly according to the level - they should stand straight and not fall into either side. If desired and possible, the posts can be concreted, so they will stand much longer.
- On each column, at the top and bottom, we fasten the beams with a cross section of at least 50 x 50 mm with self-tapping screws.
- We lay crossbars between the posts from above and below and screw them on both sides using self-tapping screws or nails.
- It was the turn to nail the crossbars to the prepared skeleton. The distance between the staples can be at least 1.5-2 cm, but if you want to make this wooden fence solid, nail one board close to the other.
- When your fence is already fully installed, you should start painting it. To do this, process everything again. wooden elements fence with linseed oil, and after it dries with varnish or paint.
For more saturated color and to enhance protection from natural phenomena, paint over the fence 2-3 times. This will extend its life.
Video: Overview of fences. Homemade wood fences
Concrete decorative fence has gained immense popularity in the last decade. The reason for the increase in popularity was the invention of collapsible structures, convenient for transportation and installation. Designers have perfected these concrete structures and filled the markets with all sorts of models of such fences. Such fences are ideal for both industrial enterprises and the private sector (houses, summer cottages).
Advantages of a concrete fence
- Unpretentious;
- Long service life - over 100 years;
- Easy and quick to assemble;
- Affordable price;
- Variety of models.
Disadvantages of such a fence:
- It is difficult to carry out all the operations on assembling the fence on your own; the help of 2-3 people will be required during delivery and installation.
Types of concrete fences:
Sectional type-setting - are widely used for fencing private houses, they are diverse. They are assembled from small sections that are inserted into the grooves of the posts. Everyone can choose for themselves the height of the fence and a specific model. There are openwork sections, lattice and solid. 2-3 people are enough for assembly;
Self-standing - more often used for fencing industrial facilities, represent a huge solid wall with large ornaments. Such a fence completely hides everything on the other side from prying eyes. The peculiarity of a self-contained fence is that each section of it has its own support and does not need pillars at all. The downside is that when installing and dismantling it, you cannot do without a crane.
Having decided to install just such a fence on your site, take care of ventilating the site. If you decide to shut yourself in tightly, then the whole ecosystem of your garden may suffer from such a decision of yours. Without regular ventilation, the soil acidifies, grows overgrown with mosses, and trees begin to rot. The situation will be saved by a few lattice or openwork sections.
Marking the future fence with a rope and stakes will help you clearly define the scope of work, calculate required amount sections, designate the places of future columns. Each section is 200 cm long, so the distance from one pillar to another will be 205 cm. Mark the place for the posts with stakes, and use a rope to check how level your fence will stand.
Unloading of building materials. Sections concrete fence have a weight of about 70 kg. The pillar itself weighs 90 kg. When unloading, it will be very important for you to take this into account and take measures to facilitate the installation process. If you lay out sections and posts along the entire working area (future fence), then you will significantly reduce both installation time and physical activity.
Installation of columns. This system does not require foundation pouring. The very first post and the latest are installed initially. After that, they dig in all the subsequent ones, strictly in the designated places. If the terrain is uneven, then the height can be adjusted using the height of the posts.
The sections are installed in special grooves located on each post. The lowest layer from below can be overlaid with roofing material.
If desired, the finished sectional fence can be painted in any color, using special compositions for the facades for painting.
Despite their high cost, brick fences are still very popular. A very large assortment of bricks encourages the construction of more and more new structures that highlight the dignity of each brick.
Advantages of brick fences
- Strength;
- Reliability;
- Durability;
- Fire resistance;
- The beauty;
- Fundamentality.
Now it is customary to select a brick for the fence, under the brick from which the house is made - one complements the other! The fence can be solid and with elements of forging, gratings - everything is at your discretion.
How to start the installation?
Draw a fence (albeit primitive), this will help to calculate the required amount of building materials. Mark the places of the columns on the plan with dots. Mark the location of the fence on the site. Using a cord and stakes, mark the places of the posts. Do not forget to also mark the place for the future wicket and gate! Measure all corners carefully, each corner must be exactly 90 degrees!
The foundation is the backbone of your fence. The more you place it correctly, the more stable and strong your fence will be. Initially, you should dig a trench under the foundation. For strip foundation a trench with a depth of at least 40-50 cm is ideal. But the higher the fence, the deeper and wider the foundation should be laid. IMPORTANT: fill the foundation all at once, otherwise the joints will crack and the structure will not be so strong anymore.
Before pouring concrete into the trench, you should prepare a place for the foundation - lay the so-called "bed". For her, sand must first be poured at the bottom of the trench, then gravel, everything must be thoroughly poured from a hose with water and thoroughly tamped. After that, make the formwork, lay the reinforcement. Pour the formwork with concrete, monitor the level. Let the foundation dry well and acquire the necessary strength. After a week, the formwork is allowed to be removed.
Brick masonry. On the top of the foundation, be sure to lay a layer of roofing material, it is fixed with liquid glass and cement mortar. Through every 2 - 2.5 m we lay out pillars of 25x25 cm. Between the pillars, a socle of 50 cm in height and 25 cm in thickness is laid, above - the usual masonry in one or half brick. For a fence, laying in one brick will be sufficient. But if you are laying a high fence, then it is best to lay it in two rows. At your discretion, lay out with openwork, single-row or combined masonry. When laying, be sure to monitor the level! At the end of the masonry, engage in the jointing, keeping its width of 5-6 mm.
Video: DIY brick fences
Chain-link fences - cheap and beautiful!
Most cheap option fence! Even a beginner can handle the installation! All installation work can be done in one day.
The advantages of such a fence:
Provides ventilation of the site;
Durability - service life up to 30 years;
Economical - saving time, saving on labor.
Minuses:
The entire site is clearly visible;
1. Mark your site, using stakes and a cord, mark the future location of the posts and net;
2. Dig holes for the posts. The posts can be either metal or concrete; in the most simplified versions, wooden ones will also do.
3. Depending on the soil, take care of strengthening the posts. If the soil is dense, reliable, it will be enough just to dig a column into it to a depth of 60-70 cm. But if there are any peculiarities, be sure to prepare the holes. Fill the bottom with sand first, and then gravel, insert a column at a right angle (using a level) and fill it with cement mortar.
4. Stretch the net and attach it to the posts. The chain-link can be attached to wooden posts with nails, wire. But you need to attach a chain-link to metal and concrete with special fasteners. However, the most popular type of attachment to any posts is the same wire.
5. With the help of a reinforcing wire stretched between the mesh cells, you need to properly stretch the mesh to prevent it from sagging. It is recommended to stretch the reinforcing wire both from the top and from the bottom of the mesh.
6. To protect the chain-link from metal corrosion, you should paint the mesh cells well with any oil paint on drying oil.
DIY fence made of corrugated board - an inexpensive option
Corrugated fences are also very popular. A large assortment metal profiles and a huge range of colors contributes to this. In the presence of building materials and necessary tools the work will not take much time and effort.
- Sheets of corrugated board;
- Metal pillars;
- Cross logs (2-3 pcs. For each section);
- Screwdriver;
- Self-tapping screws;
- Level;
- Welding machine;
- Sand;
- Gravel;
- Cement mortar.
Front of works:
Always and everywhere, when installing any fence, you need to mark the location of the fence itself and the posts, as well as the presence of a wicket and a gate.
Drill or dig holes 1-1.2 m deep under the posts.
Use sand, gravel, and water to prepare a pillow for each post. The height of such a pillow should be about 25 cm.
Install the prepared metal posts with a cross section of 50x50mm into the drilled holes directly on the gravel pad. Align the posts with a level and fill their base with cement mortar.
Using self-tapping screws, attach the sheets of corrugated board to the resulting frame. But the best option fastening the corrugated board to the joists there will be special rivets for metal. Using them you will protect your brand new fence from intruders.
Installation of a fence made of corrugated board, quickly and inexpensively
After reading this article, I hope you have matured a plan for arranging your site and you were finally able to accept correct solution, regarding the material for
Our portal has already repeatedly told how to build in the country from a wide variety of materials. In articles about a fence made of an unedged board and the construction of a variant of a fence made of a professional sheet, we opened and explained from
Of whatmake a cheap fence to the country with their own hands
Then, putting them along the line, he hammered them with a sledgehammer 1 meter into the ground, at a distance of no more than 2 meters from each other.
After that I painted aerial part and connected all the posts with twine in 4 lines.
WAAD
At the top ends of the posts, I made twists from thick copper wire for 2 turns. This is necessary so that the twine does not fly off. He pulled the twine, wrapping it once around the post, going sequentially - from the bottom up. This ensures good tension. If you start pulling the twine from top to bottom, then when you pull the lower lines, the upper ones will weaken.
Stretching the twine, Nikolai "threw" the cable, and the cable did not twine around the posts, but let it go along a tangent (this should compensate for the lengthening / shortening of the cable length in cold weather), screwing it with a wire twist clamp. Moreover, the cable does not go into a tightness, but with a small sagging, 1 cm on each span, and then it is already stretched by twisting it with a twine.
Having received the basis, WAAD just put the net on upper part structure, as if hanging the sheet on a rope to dry, and then grabbed the lower part with twine.
But the easiest way is to make potholders from plastic ties, without tightening them to the end, providing a free play of 1-1.5 cm.
Important: we grab the net only at the bottom, and do not fasten it to the posts. Otherwise, in the places of "tack" it will be torn by the wind, right up to the formation of holes.
Not all cheap types of fences can boast of strength and durability. But here the result is a light, rather opaque over budget fence, which has a low windage, because the mesh allows air to pass through. In terms of reliability, it even surpasses other cheap fences without a foundation. A test by strong winds showed that the fence does not fall (it only bends by 2-3 cm, and due to the elasticity of the posts, it immediately returns to its original position). The mesh practically does not fade in the sun, does not tear, does not pop, only sways a little.
There is practically no snow load. The fence also performs a security function. It is impossible to climb over it - the columns are springy. Do not break the mesh, just cut it with a knife. Crawling under the fence is also impossible. The lower cable can only be raised by 20-30 cm. It will not work either by throwing the cigarette butt on fire.
How to make an inexpensive fence around your home.
WAAD
I myself did not expect that the fence would turn out to be so strong, and the installation would be so easy and quick even for one person. The fence is green, it merges with nature and does not look like a foreign element on the site, and by raising the lower edge, you can push the mower under the canvas and calmly mow the grass.
If repairs are necessary (a hole has appeared in the fence, or over time it has faded a little, etc.), there is no need to change the entire material of the fence. We buy the cheapest "facade" roll with a density of 35 g / sq. m, we transfer it to the old one, tie it up, and the fence is as good as new. The fence and reinforcement column itself does not stick out from the ground by the forces of frost heaving, and if necessary, it can be corrected with a “light movement of the hand”.
The fence fabric follows the topography of the site, flowing around all irregularities, and allows air to pass through the cells without the formation of stagnant zones, which is important for plant growth.
Also, such a fence is optimal as a temporary - intermediate fence, before the construction of a capital fence during the construction of a house, it is also an excellent budget fence from neighbors.
Despite the ease of installation, before making such a budget fence for a summer residence, you should pay attention to a number of nuances and recommendations developed during its operation. In order for the extreme post to provide support during tension, and not to bend (since it has the maximum load), Nikolai hammered in an additional spacer post at an angle of about 45 degrees.
And after watching our video, you can see the fence made of the facade mesh "live" and get acquainted with other secrets of country life from WAADа.