How to make a spinner with your own hands. We cut out the body of the spinner. How to make a spinner out of plastic lids

Fidget spinner

The basic rules for making the current turntable: central bearing; radially located weighting blades.

With a certain skill, you can make a spinner based on four bearings. Buy them at a sports store that sells roller consumable parts.

Prepare the center of the toy: remove the anthers on the sides with a knife and place the part in the solvent for 3-5 minutes. To get rid of the grease, clean the bearing with a toothbrush and dry thoroughly with a rag.

Use super glue to attach the blades to the prepared center. If you try, you will be able to make a spinner even better than a store spinner! Decorate it creatively, for example, glue it with a colored cord.

How to make a spinner without a bearing

It is very easy to make a spinner out of four plastic bottle caps the same size. The future blades of the gadget will serve as counterweights, so fill them with plasticine and fill them with a glue gun.

Punch a hole in the center of the fourth lid with a hot knitting needle. This detail is the middle homemade spinner... Glue three blades to it. Then follow the spinner axis.

Make two pieces of glue gun stick, each one centimeter long. Place the center of the spinner on a half of a toothpick, put pieces of glue sticks on both sides of the axis. Color the gadget acrylic paints.

You can make the center of the spinner a bearing, which is attached to a pre-cut form from plywood. Excellent blades are obtained from coins glued together.

On the Internet, you can find instructions, a cardboard spinner, using the origami technique. To create a collection of unique gadgets, get creative and try to invent new ways to make a spinning toy.

Interesting facts about the spinner

The invention of the spinner is credited to Ohio chemical engineer Katherine Hettinger, who in the 1990s made a soothing spinner for her ailing daughter.

In its current form, the spinner was patented by Scott McCoskeri. According to him, the metal spinner he invented in 2014 helped him cope with anxiety during business meetings.

The wave of popularity of the spinner came in 2017. Some American schools even had to ban the gadget because it distracted students from classes.

In pursuit of the current trend, Kim Kardashian released gold fidget spinners in 2017, and with a Novosibirsk spinner made from Zhiguli, she collected more than one hundred thousand views on YouTube.

Experts say that the spinner develops fine motor skills, relieves stress and irritation, and helps to concentrate. The benefits of gadgets for patients with autism and ADHD are stated.

Paper spinner without bearing

The simplest, three-blade model of a paper spinner does not require a bearing and is performed using a template, the basis for which can be drawn on a five-ruble coin, a cover from plastic bottle or any other small round object.

To create a template on cardboard or sheets of thick paper glued together, draw a figure consisting of four circles: one in the center, three others are located in the form of petals along the edges of the central circle. You will need two such blanks - for the external and inside spinner. It will also be useful to immediately make the details used to decorate the axis of the toy: using a coin of 1 or 2 rubles, four identical circles are drawn. All blanks for a spinner without a bearing are carefully cut out with nail scissors.

In order to add extra weight to the blades of the toy, which provides the spinner with long-term rotation, coins are neatly glued to the three lateral circles of one of the blanks. To make the turntable more attractive appearance, it is recommended to mask the coins: for this, the upper and lower parts of the templates are glued together and sent under the press for 10-15 minutes.

A small hole is made in the central part of a homemade spinner using a thick needle or sharp awl to mount the axis of rotation. As an axis, a segment from the rod of a fountain pen, a toothpick or any other object suitable for this purpose can be used.

The tube is inserted into the hole of one of the remaining round parts so that the edges of the axis do not protrude above the surface of the circle. For better fixation, it is recommended to coat the junction of both elements with glue. After the glue has dried, the axis is inserted into the central hole of the spinner and masked from below with a second round piece. The remaining two circles are glued over the camouflage elements of the central circle: these parts are designed to make the finished toy easier to hold in your hands.

After the glue on all elements of the toy is completely dry, they start decorating: a paper spinner is painted with paints, markers, felt-tip pens or even nail polish; draw geometric elements that, when the blades rotate, form an intricate pattern; pasted over with foil or wrapping decorative paper. If you paint the details of the toy with luminescent paint, you get a glowing spinner that will look very impressive in the dark.

Paper spinner for the little ones

With kids preschool age you can make a spinner of a simplified design, but just like a regular spinner made of paper that requires creative approach to decoration.

For work you will need thick cardboard- the walls of packaging boxes are very suitable for this purpose; office white or colored decorative paper; two beautiful buttons, strong lace or thread.

Using a saucer or any other round object, draw three identical circles on cardboard, carefully cut them out and glue them together. The same size circles are cut out of white or colored paper - you will need two such parts for the upper and lower parts of the spinner. If these elements of the toy are made of white paper, then on this stage they are decorated: painted with paints or felt-tip pens, painted with patterns, glued sparkles or sequins. After decorating, both parts are glued to the cardboard base.

In the center of the workpiece with the tip of scissors, carefully make two holes and on both sides of the workpiece, two buttons are glued to this place so that their holes coincide with the holes of the workpiece. A string or thick thread is pulled through the buttons so that two loops are obtained from the bottom and top of the homemade spinner. The free ends of the thread are tied in a knot and the protruding ends are cut off.

To put the spinner into action, both twist the loops in either direction, then pull the cord and allow it to unwind, which will make the cardboard part rotate as well.

Now such a thing as a spinner has become fashionable. Almost at every step you can meet a passer-by twisting this simple device. Now it has become popular not only to spin a spinner in your hands, but also to draw it. It turns out to be not at all difficult to do, try it.

You will need

- simple pencil
- ruler
- eraser
- compass
- colored pencils (markers, paints)

Instructions

So you have a blank slate. Imagine an isosceles triangle on it. Bad with fantasy? Then draw it along the ruler, lightly pressing on the pencil, so that later it is easy to remove it with an eraser.

Spinner- a newfangled simulator for developing fingers, relieving stress with a bearing in the center. To bring it into working condition, you need to take it for inner part and unwind the outer one. The spinner will spin around the axis for a while.

A spinner is fun for everyone: for respectable men in expensive suits, and for restless children, there are no small parts in the structure, and the toy itself has no sharp corners.

The device has a beautiful aesthetic appearance, in various colors. Compactness allows you to take it with you everywhere.

The spinner is bought for personal use, as an unusual gift for all age categories of people of different status: the item will bring joy and pleasure to everyone.

According to experts, the subject helps people with autism and attention deficit disorder to focus. He helps to calm down hyperactive children who do not know what to do with themselves. Some find comfort in the sound of the vibration of a working device.

In the article you will find out details about the thing, the history of its creation, the instruction manual. Also learn how to make a spinner with your own hands.

Views

Fidget spinners come in a variety of shapes, sizes, and prices range from a dollar to hundreds of dollars. The toy is made from different materials: metal, wood, plastic. When using a combined material.

Fidget spinners are available with three or two petals, smooth and rough.

Plastic ones are larger in size and lighter in weight in relation to metal ones.

The ceramic bearing contributes to the long-term rotation of the object.

History of origin

The fidget spinner was invented by the American chemical engineer Katherine Hettinger. According to her, the idea of creating anti-stress came to her in Israel. Watching the picture of how the children threw stones at the police, she wanted to make a toy that would occupy the thoughts and hands of the boys, freeing their minds from pranks.

According to other sources, the scientist invented an activity for her daughter, with whom she could not spend a lot of time due to malaise.

In the 90s, a woman proposed her invention to manufacturers, but no one took a patent. Currently, the device is not similar to the one previously invented.

In 2014, businessman Scott McCoskeri created a similar stress relief product. It represented an iron rotating device. The invention was liked by all his acquaintances, since in 2016 McCoskeri filed a patent for himself.

On the Russian market the product appeared in 2016.

What is a spinner for?

The purpose of the spinner is to train hands, develop motor skills in children. The device relieves stress, helps to cope with anxiety, concentrate, and soothes.

Often fingers and hands are developed with the simulator after injuries.

A decent advantage of the finger spinner is that it helps you quit smoking. Monotonous spinning movements soothe and distract from thoughts of addiction.

How the device works

The gadget does not need batteries or rechargeable batteries to operate. There is a bearing in the central part. One has only to snap your fingers and the unit will start working. You need to hold on to the middle with your thumb and middle finger. Use your index finger to drive the machine.

How to spin a video spinner

The bearings are of high quality. The higher the rating, the longer it takes to spin. The center bearing is sufficient for the rotating element, the rest are compressed decorative element and weighting to improve balance.

How long has it been spinning

How long does a spinner last? Rotation time - important quality and one of the main indicators of traits good apparatus... Connoisseurs of quality toys use only expensive bearings, calculated balance and the right materials for long spinning spinner.

It may seem inconsequential, but trust me, once you spin your first spinner, you will be surprised at how quickly you want the spinner to spin faster and longer.

The price of a spinner starts from the dollar. Inexpensive trinkets spin for a couple of minutes. The duration of rotation of serious units (using steel, copper, brass) reaches tens of minutes.

The greater the weight of the product, the faster the bearing works and the device rotates, the louder the sound and vibration. Ceramic and combined bearings vibrate less.

How long does it last

There is no single answer to the question of how long the spinner lasts. The criteria for a long service life depend on the materials used, the accuracy of operation, and the absence of mechanical damage. Metal bearings will extend the life of the device for many years.

Those who are skeptical about these toys simply did not try to twist them. One has only to find "your" device, you will not want to part with it, the lesson is addictive.

DIY spinner at home

Make device with my own hands not that hard, follow our advice, watch the video, add some dexterity and soon you will be rotating the product.

Made of paper without bearing

A do-it-yourself spinner without a bearing can be made from paper and scrap materials.

Master class of the Plastilin channel.

How to make a paper spinner? First, draw a drawing: take a round object with a suitable diameter (in the example, a bottle cap), draw a sketch as in the photo.

Then you need to smooth out the corners between the circles.

Cut out the shape along the borders.

Attach to cardboard, circle and cut out the second identical part.

You need to cut 4 circles with a smaller diameter.

The coins will serve as a weighting agent. Stick on three parts according to the weight,

Glue the other half over the top with glue.

Punch a hole in the center with nail scissors.

These are the blanks that should turn out.

Decorate your toy, paint it in your favorite colors.

Cut a part of the juice tube and insert into one of the circles.

Fix with glue, let dry.

We collect our unit.

A circle without a hole is glued on top.

The do-it-yourself paper spinner is ready.

How to make a spinner from scrap video materials

DIY wood spinner

If you have golden hands and they know how to use a jigsaw, a drill, you can easily make a product out of wood. It will turn out to be smooth, solid, it will be pleasant to hold it in your hands. Below is a master class from the ZarkReed channel.

Spinner bearing

Which bearing to take for a spinner? Answer: any. Remove from a broken skateboard, scooter. If the fan is broken, or the computer cooler, remove it from there. If there is nothing to disassemble, order online or purchase from a store.

Stages

For beginners, it's best to start with a thin wood material like DPS. Manufacturing procedure:

Draw a drawing.

Cut a sketch out of paper, attach to wooden surface, circle.

Cut, sand the parts with sandpaper.

Make a hole in the middle - it will turn out more accurately.

An important point: the thickness and diameter of the hole in the tree and the bearing must match.

The coins are glued with glue.

The base is painted over with acrylic paints.

The central part, coins are inserted and glued.

The spinner toy is ready.

DIY wood spinner video

DIY glowing spinner

The spinner can also be made glowing with LED strip and battery. Stock up on the right ingredients, watch the video, and make your own beauty.

If you make this little thing as a present and present it to a dear person, he will appreciate it! It is very popular and fashionable direction, the indifferent will need to look.

The text was prepared by: Veronica

Teenagers, children and older people, especially the eternally tired and tense "office plankton", have a fashionable toy-twist today. The spinner is designed to relieve stress, keep a person busy for a while, distract from sad and heavy thoughts, and along the way train “sleight of hand”. Today - at the peak of its popularity - a spinner can be bought in almost any store. But you can also make a twist with your own hands from scrap materials and various debris. It doesn't take much time and effort.

What is a spinner?

To understand what to start, you need to understand what a spinner is and "what to eat it with."

The fashionable toy has many names: spinner, hand spinner, fidget spinner, hand spinner. It is a figure with three radial blades.

In the center there is a metal bearing holding them.

The toy is made from materials such as titanium, copper, brass, stainless steel, plastic. Depending on the material and design of the spinner, the speed and duration of its rotation, the vibration of the sound that emanates from it, depends.

The spinner was invented in the 90s of the twentieth century, but gained popularity only in 2017. At first, the funny spinner went around all the schools in the world - during recess, students performed various tricks with the spinner. They were even banned in American schools on the grounds that playing with a turntable distracts children from their studies and interferes with their concentration.

Then the "miracle twist" crawled into the offices. Some believe that it can help to concentrate or, on the contrary, to relax, as, for example, a spinning top or a yo-yo helped before. Forbes representatives called the spinner “the must-have office toy of 2017”.

To "be in trend" - you need to have it. So let's get to work!

Simple ways to make a spinner from scrap materials

Experienced life hackers have long come up with ways to make a spinner from what is at hand. All materials are used, some basic things like cardboard, plastic lids (from soda), buttons, coins.

Despite the fact that the prices for the toy do not exceed a few dollars ( average cost in Moscow - 250 rubles), craftsmen do not give up their attempts to create something creative "their own". Again, "so that I eat my hands."

Fidget spinner made of plastic caps

This is an easy-to-do craft, which, however, will require some effort and diligence.

In work you will need:

Four covers.
Glue stick and gun.
Plasticine or kinetic sand(if available at home).
Toothpick.
Nail or knitting needle.
Lighter
Scissors.

Sand or plasticine is alternately stacked in three bottle caps - up to the top. This is to keep the blades heavy so the spinner will spin.

The remaining space must be carefully filled with a glue gun.

A hole is made in the remaining lid (using a heated knitting needle or nail) - exactly in the center.

Then three petal caps are laid out around the base with a hole. The same distance must pass between them. How to check? Put another same cover between them.

All three parts are glued with a glue gun.

Two pieces of 1 cm each are cut from the glue stick. One is put on the base of the toothpick, it is passed into the center of the toy. The other end also needs to be “secured” with a rod.

The turntable can be beautifully decorated, for example, painted with acrylic paints, they fit well on plastic. Homemade spinner is ready!

step-by-step instruction

Fidget spinner without bearing

For the manufacture of this toy, again, you will not need materials that are difficult to work or those that cannot be found.

It is necessary:

cardboard;
spinner template;
3 coins;
glue;
rod from the handle;
awl;
materials for decoration (paints, rhinestones, etc.)

The hardest thing is to find ready template spinner. You can do this on the Internet, or you can draw it yourself using a marker and the same plastic cover (or coin, or buttons) - just lay them side by side and circle them.

For work, you will need two blanks made of cardboard.

You will also need 4 smaller circles (for example, circle the smaller coin).

Coins are attached to one of the templates with glue - each on its own blade. These are weights. They should be slightly smaller than the diameter of each circle.

Coins are coated with glue on top and a second blank template is glued.

A hole is made in the center of the resulting cardboard spinner. It is necessary to insert a rod from the handle into it and cut it off - 1 cm is enough.

In two circles of a smaller diameter, it is also made through the hole.

The other two remain intact.

Before proceeding with the final work, the toy must be painted. Fit ordinary paints- watercolor, gouache - or markers.

You can show your imagination and make a bright model out of the turntable, for example, matching in color to your favorite super-heroes.

You can use rhinestones, Velcro and other elements to decorate. They sit on the glue, but should not interfere with the game with the turntable.

How is the spinner collected? A rod is inserted into one of the small circles. It is necessary to glue its base with glue, insert it into the hole in the toy and press it on top with a second circle.

The remaining two circles are attached from the outside so that the rod is not visible, and the toy lies comfortably in the hand.

The spinner is ready!

step-by-step instruction

There are many other options for making a spinner at home, but the ones presented here are the simplest. Even a child can cope with this task.

Output:

Fidget spinner is a super-fashionable anti-stress toy today. To be in trend, you can make a turntable with your own hands. You don't need money for this - all the materials will be found at home - just a little free time.

Reading time ≈ 6 minutes

More recently, the market for modern youth gadgets has been exploded by an anti-stress toy called a spinner. Despite the large assortment of the offered goods on the shelves of stores and Internet resources, the option to create a spinner with your own hands looks very attractive, since it will not only save on the product, but also get the desired spinner according to your ideas and fantasies. There are many options for making a spinner with your own hands at home, consider the most popular of them.

What is a spinner?

The original name of the toy - fidget spinner comes from english word spinner, which means spinning or spinning. It consists of one or more bearings, which by their rotation help not only to pass the time, but also to improve finger motor skills, dexterity and attentiveness. The good old yo-yo, which at the beginning of the 2000s could be found in the hands of everyone, can be called analogs of the spinner. Now one of the most popular places among fashion trends are occupied by spinners, in terms of dexterity with which various championships are already being held.

What is a spinner for?

The original purpose of the spinner is a toy for young people, a trinket that helps to pass the time, but this spinner has turned into something more over time. As practice shows, the spinner is an excellent assistant in the fight against bad habits... This concerns quitting smoking, snapping fingers and many other unpleasant moments associated with the fact that a person urgently needs to take his hands with some kind of business. As a result, spinning a spinner has become a real hobby for many people who not only master the skill of spinning a toy, but also compete in this aspect with each other.

How the toy works

The main task of this product is its rotation, which should be continuous and occur without special efforts... The base that gives the toy rotational motion is the bearing, which is located in the center. In order for the spinner to spin beautifully and for a long time, it must have the correct shape and a reinforcing weight. Usually three weights are used, evenly spaced from the center, however, spinners can often be found with two or four weights. IMPORTANT to note that spinners do not require rechargeable batteries and batteries for spinning. If the toy is made in the correct way, a slight flick of a finger can make it rotate around its central axis. The most important thing in the normal operation of the spinner is the observance of symmetry, because even a slight deviation in the dimensions of the sides with weights will lead to poor and unstable rotation.

How to make a spinner with your own hands?

The manufacture of this twist is not a complex technological process that requires special knowledge and tools. The main material is one or more bearings, and there are many options for making the base. The main nuance of this process is the weighting of the edges of the spinner, otherwise it will rotate badly. For weighting, coins, nuts, or other bearings are perfect. IMPORTANT detail for hand spinners, bearing lubrication is used, which allows increasing the rotation speed of the toy by several times. It is recommended to lubricate with oils designed for motorcycle chains. If you don't have one at hand, you can use the WD-40 tool.

Fidget spinner made of wood

In order to decide on the question of how to make a spinner with your own hands, you first need to decide on the base material. Cool spinners are made from wooden base, which, with proper and high-quality processing, is not much different from factory counterparts. First you need to create a drawing of the future product. It is based on the diameter of the bearing and three weighting materials, starting from these numbers in the future. Having transferred the sketch from paper to a wooden blank, you need to cut out the future spinner with a jigsaw.

Holes for metal parts are drilled on a special machine or with a pen drill. For ease of use, the workpiece must be carefully grinded and polished. The reliability of the finished toy will be given by fixing metal parts to the base with epoxy or any other glue. In order for the spinner to be conveniently twisted on a finger or any other surface, it is recommended to apply to the rotating part of the bearing decorative overlays... Of the materials at hand, two ordinary buttons of the appropriate size are perfect for this role.

Fidget spinner of 4 bearings

An attractive manufacturing option is to create a spinner from bearings with your own hands. First, this method does not require different foreign material, except for glue and four bearings, one of which will play the role of the central axis, and the other three - weighting materials. Secondly, this method does not require a lot of time, allowing you to get a spinner in 5 minutes of work.

The only problem with the process is poor adhesion. metal parts between themselves. For reliable fixation, additional heat treatment will be required, which is often difficult to provide at home. After gluing, excess glue should be removed with a file or file, thereby removing all rough surfaces.

Hand made hot glue spinner

Hot glue is an excellent base for a homemade twist. For manufacturing, you will need a set of weighting materials, a bearing, hot glue and a base that acts as a flask (usually made of thick paper or cardboard according to the drawing).

An important point is the installation of metal parts strictly in the center of their area. Then glue is poured into the mold and waits there for complete solidification. After hardening, the paper outline is removed and the spinner is sanded to a completely smooth surface.

Epoxy glue toy

To make a homemade spinner, you can use not only hot glue, but also epoxy in a semi-cured form. Plasticine glue not only connects the bearing and weighting materials, but also serves as the basis for the torque.

In this manufacturing process, it is important to correctly position the metal parts, for this it is better to use a pre-marked wooden board from drilled holes and inserted clips. It is better to remove the main excess glue until it hardens completely, then sanding only small roughness.

The most simple and a budget option self-made spinner, this is work with plastic clamps, which are designed to pull the cables together. For ease of use, it is recommended to use metal weights of the same diameter as the bearing. Weights are laid out in three corners of an equilateral triangle, as shown in the photo. Around them, a base is created from three screeds closed among themselves. Then, each of the weights is attached to the base also with a plastic clamp.

After that, an axial bearing is installed in the middle and uniform tightening of the clamps begins on the side of each weighting agent. For reliable fixation, the resulting structure is pulled together with three more clamps, from the center to each side of the weighting weights. This method manufacture, although it is the most inexpensive and fastest, but the appearance of the finished product is significantly inferior to analogues from other materials.

Fidget spinner made of MDF

Making Medium Density Fiberboard Fidget Spinners is very similar in principle to working with a piece of wood. At the beginning of the process, at small size markings are applied to MDF sheet, taking into account the placement of metal parts and overall size spinner. Then holes are drilled for the central bearing and weighting elements and the size is adjusted close to the final one.

It should be noted that when processing and drilling MDF sheet you need to be more careful and accurate than when working with wood, since this material is fragile and brittle. For an aesthetic appearance finished product it is recommended to paint it, while before painting the spinner must first be sanded and degreased.

Fidget spinner is a new-fashioned children's educational toy, which in a matter of months has become incredibly popular all over the world.

She received the attention of not only children, but also adults. The cost of a spinner varies greatly, depending on the materials and the number of component parts.

In this article we will tell you how easy it is to make a toy with your own hands at home.

Positive qualities of a spinner

There have been and are many disputes about the benefits of this toy, which have not come to a common conclusion.

However, many admit that the spinner has a number of positive properties.

For example, it soothes in stressful situations.

This means that it helps to cope with mental and nervous stress.

For many, a spinner helps to concentrate attention, and, of course, develops motor skills.

Also, many note that the spinner becomes an excellent alternative to bad habits.

Paper

Paper is the most readily available material.

You can use cardboard to add density. But even from them, a spinner can be created in two ways.

The first is origami. For manufacturing, you will need two square pieces of paper and two ordinary pushpins.

First, fold the sheet in half and unfold. You should have a clear line in the center.

Bend the edges towards it. When you unfold the sheet, you should see three clearly defined lines.

We begin to bend the corners. On one sheet of paper, fold the upper left and lower right corners, on the second, vice versa - the upper right and lower left.

We put the figures one on top of the other. Fill the corners of the vertical shape into the corners of the horizontal one. Thus, you get something similar to a shuriken.

The spinner is ready!

The second method is less sophisticated. Having drawn it yourself or downloaded the template on the Internet, carefully cut the drawing along the borders using ordinary and nail scissors.

It is important that the diameter of the bearing bores is slightly smaller than the diameter of the bearing itself. Use glue for soldering.

The more it is, the better. This will give your spinner extra density. After gluing, it remains only to paint the toy in any color.

Bottle caps

This material is also among the simplest.

In addition to bottle caps, take bearings.

First, think over the model, because the amount of materials depends on it.

The simplest, with three blades, includes 4 plugs and the same number of bearings.

You will also need a glue gun, knife, sandpaper, and drill bit. Sand the plugs first.

This will remove any roughness and irregularities that would later get in the way. Cut a hole suitable for the bearing.

Following the design idea, place the plugs around the center at the same distance. Glue them honey together.

The remaining bearings are fixed in the remaining plugs, and the spinner is decorated with a marker, stickers or paint.

Also a spinner from bottle caps can be produced without bearings.

Wood

For craftsmen to work with wood and a jigsaw, there is a great opportunity to create a toy that will hardly differ from the product in the store.

The main thing is to think over the model, and after manufacturing, carefully process the spinner.

Attach a piece of paper, handwritten or downloaded from the Internet, to the tree and circle it with a pencil or pen.

Saw and sand the toy. To get a hole for the bearing, drill it from one side to the middle, and then turn the part over. The thickness of the material must match the thickness of the bearing.

Fidget spinner is a toy that attracts not only children, but also adults. No need to spend money to buy it.

Make a spinner yourself and have fun with this simple game.