O useful properties Humanity has known water procedures for a long time, but the whirlpool bath is an invention of not so distant past. Before choosing a whirlpool bath, so that its quality, and the cost of such a product is high enough, meets the requirements, it is necessary to understand some design features, analyze the quality of the materials used and the ability of the equipment to produce the required therapeutic effect.

A bit of history

Historical note: Discovered in 1936 in Berlin, the effect of a faster recovery of patients taking water treatments, when masseurs massaged their body, immersed in a bath or pool with a jet from a hose under a slight excess pressure, it was very quickly adopted by doctors in the treatment of a wide range of diseases. And already in 1948, Italian-American Candido Jacuzzi, inventor and manufacturer of pumps and equipment for airplanes, wanting to help his son recover, used a pump submerged in a bathtub to create a pulsating water jet.

It was this device that became the prototype of the equipment so popular today. Of course, modern devices are strikingly different from their great-grandmother, but the principle of combining water, air and massage still helps people to maintain health and good spirits. Do I need a hot tub in an ordinary apartment? Most likely, yes, because there is nothing more valuable in life than your own health.

Problem of choice

Going to any construction supermarket or specialized plumbing equipment store, you can find a huge number of hydromassage baths different sizes and configurations. And in order to answer the question of which hydromassage bath to choose, it is imperative to have a correct understanding of its structure and the purpose of certain elements. After all, this is not just a bath, but a very complicated one. technical device, which has a lot of different characteristics.

“Recommend a hot tub,” the buyer will ask the sales assistant. And he will listen to a long story about different devices, absolutely not understanding the essence of the issue. This approach can not only disappoint him after the purchase, when the equipment does not live up to expectations, but it can also lead to a rather significant cost overrun.

Is the material really that important?

Before making a choice of a hydromassage bath from the whole variety of models presented, it is necessary to take into account the peculiarities of the use of certain materials:

• Steel baths. Hydromassage systems made of cold-rolled steel and equipped with a nozzle system are lightweight, can be installed on the simplest devices in the form of legs, are quite durable and easy to process. However, they also have a number of significant disadvantages. Increased noise during equipment operation, increased consumption hot water due to rapid cooling and the most main drawback – simple form products;
• Cast iron baths. They have high mechanical strength, increased heat capacity and good vibration damping properties that inevitably occur during the operation of a pump or compressor. But the large dead weight and the complexity of processing, which entails the high cost of cast iron products, can negatively affect the choice of a whirlpool bath;
• Plastic bathtubs. Best bath with hydromassage, the most widespread is a bathtub made of modern plastics and covered with a fairly thick layer of acrylic. Excellent thermal insulation, almost complete absence of noise and a huge variety of shapes.

The need to use special installation devices, considered as a disadvantage, is leveled by the presence of everything necessary in the factory delivery set of the product.

My favorite color ... my favorite size ...

Like any equipment installed in a bathroom, a bathtub occupying one of the central places should be not only comfortable, but also beautiful:

• standard rectangular models adapted for installation in small bathrooms of Soviet-built houses;
• elite rectangular whirlpool baths equipped with numerous accessories and sophisticated programmable equipment
• corner models for one or two people;
• round volumetric pools for more spacious rooms.

Modern materials and painting methods have allowed manufacturers to significantly diversify and color range offered products.

And if the color of the bath is selected according to the general color concept of the room, then the shape of the bath is dictated, as a rule, by the size and ergonomic features of the room.

Important! The complete set of a whirlpool bath implies the possibility of its periodic maintenance and would not like to carry out complex dismantling work if it is necessary to replace one small nozzle.

What's inside?

So is hydromassage in the bathtub needed for an ordinary person feeling completely healthy? The relaxing and tonic effect of the massage, of course, will only benefit, but the quality and effectiveness of the massage depends on the equipment installed in a particular model. So, when choosing, you need to consider:

• The pump and its performance. On simpler models, as a rule, one pump is installed within small limits, which changes the intensity of the water jet. In more expensive devices, in addition to the pump, an air compressor is installed that supplies air to the nozzles and creates the effect of a natural geyser, and the most elite whirlpools have several pumping units for each group of nozzles;
• Number and performance of injectors. The best hot tub has multiple sets of jets. These are side jets for general massage and special bottom jets for back massage. The intensity of massage jets depends on the number of nozzles with the same pump performance, and if it is insufficient, then such water procedures will be equivalent to bathing in an ordinary bath;
• Control system. All installed equipment is controlled by a system that can not only monitor the presence or absence of water, but also regulate the pump performance. And the more complex the equipment, the more complex and "smarter" the control system, sometimes including several microprocessor devices.

Periodic maintenance

When deciding which hot tub to choose, you need to pay close attention to the need for periodic maintenance and additional water treatment. Made of high-quality materials, nozzles can easily resist deposits that inevitably occur when in contact with water, and the pump impeller, which is less subject to wear, can maintain the required pressure in the system for a longer time.

Need to know: Even the lead pipes of the cheapest systems may need to be replaced in a short time, which will entail additional costs.

Are there any disadvantages?

Any equipment operating in difficult conditions operation, has its advantages and some disadvantages, and hydromassage systems in this matter are no exception. The pros and cons of whirlpool baths have been known for a long time, but if any sales assistant tells the buyer in detail about the advantages, then in most cases you will have to look for information on the shortcomings only on your own.

The main disadvantages of whirlpool baths are associated with the complexity of cleaning and disinfecting the pumping system and pipelines, in which, due to the constant presence humid environment are being created favorable conditions for reproduction of microorganisms that are not always useful for humans. Texas microbiologists have identified bacteria associated with human waste, fungi and deadly staphylococci in water supply systems. Therefore, a self-filled table, in which there are only two columns: a hot tub for and against, will help you choose the right model or refuse to buy at all.

It's time to talk about the price

How much a hydromassage bathtub costs depends on many factors, but as the rating of hydromassage bathtubs from various manufacturers shows, you can see a pattern that models of the middle price category are in greatest demand, and well-known European manufacturers... Most buyers are in no hurry to buy neither the cheapest nor the most expensive models, but want to get good quality by sacrificing a plethora of features.

Important! Some models, and this must be found out before buying, require mandatory additional water purification, therefore, when calculating how much a whirlpool bath costs and its installation, it is necessary to take into account that the cost of a cleaning system can be up to a third of the cost of the bath itself.

Asking yourself how to choose a whirlpool bath and which whirlpool tub is better, each person will answer it individually, but for a more correct answer, you need to carefully analyze the possibility of installing it in the bathroom, calculate direct and indirect costs and choose a model of an acceptable price. This particular bath will be the best for you.

Do you know what is the difference between a Jacuzzi and a hot tub? If not, then you can find the answer in this article. In addition, here you will find information on how to choose the right hot tub and long years enjoy your shopping.

First you need to understand that a hot tub and a jacuzzi are equivalent concepts. So called preventive baths, which are designed for massage, relaxation and comfortable water treatment.

Do you know that foreign word"Jacuzzi" is the name of the inventor of this wonderful bath, or rather its incorrect pronunciation. In fact, the one who invented the massage bath was an Italian and his name was Candido Jacuzzi. Interestingly, Jacuzzi originally developed aircraft.

The slogan of the Jacuzzi company still sounds like “Jacuzzi: Water that moves you”.

Insomnia, chronic fatigue, stress ... There is a way out! You will instantly perk up after a few hydromassage sessions. With the various modes of the whirlpool bath, you will not only improve blood flow, but also improve your metabolism.

If you decide to purchase a bathtub with a hydromassage, then you will have a question - how to choose the right jacuzzi that is right for you?

What are the main types of whirlpool baths?

Jacuzzis can be simple or combined.

With the help of air-water jets, hydromassage is carried out in simple baths, and the nozzles in such bathtubs are located in the sides of the bathroom.

And with the help of air-water or air-bubble flows, the body is massaged in combined baths. In this case, both air massage and hydromassage nozzles are used. By using the two types of massage, you will get more of the bathing effect.

When buying a bathtub with a hydromassage, buyers quite often pay attention to what basic and additional functions a particular model has, since a jacuzzi is usually purchased in order to keep oneself in shape and also improve one's health.

That is why customers need to first decide what type of massage they need, not forgetting about the availability of additional features and functions.

How to choose the right jacuzzi?

The main criterion for choosing a jacuzzi is its functionality.

Modern whirlpools can include up to ten different massage modes, plus some additional features:

• additional mixers;
• aromatherapy;
• chromotherapy;
• backlight;
• disinfection system.

Jacuzzi materials

Whirlpool tubs can be made from the following materials:

• acrylic;
• steel;
• cast iron.

How do these materials differ from each other?

Bathtubs made of steel and cast iron perfectly withstand mechanical and chemical loads, but have one significant drawback - with an accidental impact, a chip can form. In addition, these materials are published quite high level noise.

Another disadvantage of steel baths is their high thermal conductivity, due to which they cool quickly and retain heat poorly. In addition, the size and shape of the bathrooms are limited by certain standards and cannot be varied.

The most common jacuzzi material is acrylic.

This material has a huge number of advantages:

1. Acrylic does not accumulate microbes and cleans perfectly.
2. Compared to other materials used for making bathtubs, acrylic is the most hygienic.
3. Acrylic is the material that best suits the human body.
4. Any scratch or damage that may form on the surface of the acrylic bathtub can be easily repaired with sandpaper. First, the damaged area must be well treated and then polished with car varnish.
5. Compared to bathtubs made of other materials, which can lose their color, acrylic retains its color and shine forever, due to the fact that the color pigments are uniformly distributed in it.
6. Acrylic is insulating material, since it has a rather low thermal conductivity. An empty bathtub, which is made of acrylic, keeps the room temperature.
7. The acrylic bathtub can be lifted by one person as it is very lightweight. For this reason, the transportation and subsequent installation of the acrylic bathtub will not be difficult.
8. Acrylic has excellent resistance to infrared and ultraviolet rays.
9. Acrylic bathtubs are capable of maintaining their properties and excellent appearance over the years, which other materials cannot boast of.
10. Good manufacturer acrylic baths can give a guarantee for the body of an acrylic bath for about 10 years.

As you can see from the above, the most the best option is the choice of acrylic whirlpool tub. But no matter what material you choose the bathtub from, the complete set of massage systems does not depend on it at all.

Jacuzzi whirlpools

At present, the Italian company Jacuzzi occupies one of the leading positions in the market of whirlpool baths. For the manufacture of luxury whirlpool baths, this huge company uses only the highest quality components and the best materials.

Jacuzzis manufactured by Jacuzzi can become great decoration any bathroom. But nowadays the jacuzzi is no longer the privilege of only wealthy people. There is now a large selection of economy class whirlpools that might suit middle-income people.

What's inside the jacuzzi?

The basis of any jacuzzi is a hydromassage system, which consists of a compressor, a system of pipes, a pump, nozzles and a control panel. The power of a whirlpool tub is directly related to the number of jets.

If the bath has a large volume, then it needs a more powerful pump. In the case when the bathtub is equipped with back nozzles, it is better to purchase the pump and bathtub separately. A compressor is used to mix air and water jets.

The types of massage and intensity can be controlled using an electronic and pneumatic control panel. A whirlpool bath also needs careful maintenance and proper management, just like any technique.

Jacuzzi for feet - mini format

Currently, there are a huge number of models of such useful device like a jacuzzi for your feet. How, from all this variety, to choose the option that suits you? First you need to decide on the purpose of this device.

Foot baths with hydromassage combine the benefits of massage and the healing effects of water, combining health-improving effect and relaxation.

Jacuzzi for legs have a beneficial effect on tired legs, and massaging reflexogenic areas of the foot with the help of the bumpy surface of the bath contributes to the improvement of all functions of the systems of the human body. And if you add aromatic oils, infusions of herbs and salt to the water, then all the above effects will increase even more.

Almost all modern models The hydromassage foot baths are equipped with a heated water function.

More expensive models boast the presence of modes such as:

• splash protection;
• the effect of boiling water;
• dry massage;
• wet massage;
• turbo massage;
• jet massage;
• bubble massage.

Infrared lamps and magnets can be built into the bath, as additional functions... Magnets are designed to create a magnetic field that has a general healing effect on the entire body, and infrared lamps will be useful for increasing the elasticity and firmness of muscles and improving blood circulation.

If you are determined to purchase such a bath and even looked for necessary information on the Internet, you should not postpone this decision indefinitely.

Prices for such baths range from 1000 to 10 thousand rubles. Also you can find and compare specifications the most popular models of jacuzzi for feet and choose the one that suits you.

But you need to remember that even such a simple device has some contraindications:

• pregnancy;
• trauma;
• diseases of the nervous and musculoskeletal system;
• inflammatory processes of the legs;
• dermatitis;
• varicose veins;
• thrombophlebitis.

Whirlpool bath care

When caring for any jacuzzi, certain hygiene requirements must be observed. After several sessions, it is necessary to carry out a complete disinfection of the bath. With food acids and non-abrasive detergent it is necessary to clean the bath from fatty deposits and lime deposits.

If you monitor the condition of the bath and comply with all the necessary requirements, then your purchase will delight you for many years.

A whirlpool bath has long ceased to be a luxury item and is increasingly becoming an indispensable attribute of every home. Due to the growing demand and competition within the segment, prices for such products are falling, and therefore it becomes easier to choose a whirlpool bath. Since the devices are manufactured in the most different forms ah, modifications and colors, you should navigate the key parameters that will allow you to buy a functional and ergonomic product.

Depending on this criterion, two types of products can be distinguished:

• regular baths;
• combined.

The common type is very popular. This view The products are distinguished by the fact that the hydromassage function is provided by means of air-water jets. In this case, the nozzles are located on the sides of the bath itself.

Combined bath has a slightly different massage system. The inflow of jets occurs both in the form of air-water and air-bubble flows simultaneously. For this, the products are equipped with air and hydromassage jets. In terms of comfort, combined products are significantly superior to conventional ones.

Selection by material of manufacture

Modern whirlpool baths can be found in the following options:

• acrylic;
• plastic;
• fiberglass;
• cast iron.

Let us consider in more detail the features of each type of material in order to navigate the key advantages and disadvantages of the product when choosing.

Plastic whirlpool tubs

The simplest manufacturing option is plastic products. Let's consider the main advantages:

• such material looks quite aesthetically pleasing;
• manufacturers offer a wide range of goods;
• the ability to choose shapes and colors to best match the interior of the bathroom;
• a bathtub with hydromassage at a price significantly differs from analogues.

However, this product has several disadvantages:

• short service life;
• material lends itself easily negative impact hard water, salts and temperature extremes;
• low resistance to mechanical damage;
• difficult to clean, remove scratches or plaque.

Fiberglass products

This variety is somewhat less common than just plastic tub but have a number of such advantages:

• low weight of hydromassage products;
• wide design variability;
• ease of repair and maintenance;
• longer service life than plastic products;
• relative cheapness.

Along with this, some disadvantages of fiberglass bathtubs should be mentioned:

• the appearance of dullness over time;
• low resistance to physical, mechanical and chemical influences;
• If used improperly, the housing is easy to break.

Cast iron whirlpools

The rarest purchase option is a cast-iron bathtub with a hydromassage. However, the relevance of such products is dictated by several significant advantages, such as:

• durability;
• high strength of the product;
• long heat preservation;
• aesthetics and exclusivity;
• ease of care.

At the same time, cast-iron whirlpool baths have some disadvantages in use. Among the main ones are such as:

• large weight of the product;
• difficulties in installation and dismantling;
• high cost of material;
• small set of functional elements;
• relatively small selection of additional options;
• delivery difficulties.

Acrylic hydromassage bathtubs

This type of product is most in demand among consumers today. Manufacturers offer a wide range of products in a wide variety of shapes, colors and packaging conditions. Consider key advantages acrylic baths with hydromassage:

• ease of care and cleaning;
• high hygiene - dirt, microbes and microorganisms do not accumulate in the structure of the material;
• good maintainability - any crack or scratch can be easily removed at home;
• material long time retains external aesthetics, does not fade and does not lose shine;
• low weight of products;
• high resistance to infrared and UV radiation;
• long service life;
• great variety of models.

Despite the impressive list of advantages, acrylic hot tubs have a number of disadvantages. Let's consider the most important of them:

• low resistance to high temperatures;
• insufficient strength of the frame;
• susceptibility of the material to chemicals leaving;
• relatively high price.

Selection by technical components

The variety of massage procedures in the bath and their features determine the technical components with which each product is equipped. Let's take a closer look at what points should be emphasized when choosing a whirlpool bath.

Injectors

This element is a device that provides atomization of air and water streams. Modern manufacturers equip their products with two types of nozzles - brass and polymer. When choosing a bath, you should pay attention to the following features:

1. The optimal number of elements should be at least 6, otherwise the water will boil excessively.
2. It is desirable to have micro nozzles that can provide air massage functions.
3. The water pressure in the system must be at least 2 bar.
4. For ease of cleaning and hygiene, give preference to nozzles that are embedded in the surface of the product, rather than attached to the outside of the walls.
5. It is advisable to choose bathtubs that have adjustable elements with automatic closure.

Bath frame

Before buying a whirlpool bath, you should pay attention to the product frame. The main features to consider are the following:

• give preference to products in which there is a reinforcing base around the perimeter of the bath, since it guarantees an even distribution of weight on its bottom;
• the strength of the entire structure depends on the presence of a supporting all-metal frame;
• it is better if the corner bath with hydromassage will have several points of support.

Hydromassage functions

Depending on the functionality of the bath, the therapeutic effect of bathing can be achieved. In this case, the main components of the actions are the following:

• selection of massage modes;
• ensuring the state of weightlessness;
• relaxation under the thermal action of water.

Application in products

The choice of the application mechanism is determined by the number of nozzles. In this case, you should pay attention to a number of such features:

• give preference to sediments made from a special waterproofing polymer with aluminum parts;
• engine power must be at least 600 W, preferably within 700-1500 W;
• the engine in quality products runs silently;
• choose sludge with a performance index of more than 200 l / min;
• when installing the element, shock absorbers must be used;
• the best option is to install an auxiliary compressor that allows you to turn on the turbo mode.

Modes of operation of the whirlpool bath

The advantage of a whirlpool bath lies precisely in its massage functions. Underwater flows use special elements - nozzles, the operation of which can be adjusted independently using the remote control. Many manufacturers of luxury products in this segment offer an extensive range of hydromassage treatments. Let's consider the main ones:

1. Imitation of a waterfall, which is carried out using a special crane. Such a device produces a cascade of water flow.
2. Traditional hydromassage, the action of which allows you to direct the jets to the acupuncture points of the body. In this case, the force of water pressure can change, which is regulated by modes - vibrating, impulse, traveling wave, etc.
3. Oriental hydromassage - a mode of imitation of pressing the strong fingers of the masseur.
4. Spiral, rain or whirlpool effect.
5. Air hydromassage mode, which has a beneficial effect on the skin and blood flow of the body.

Choice according to design

Acrylic bathtubs have the most extensive variety of shapes and configurations. When choosing products, you may come across such variations of whirlpool baths:

1. Oval products that can be placed in the center of a room or near walls.
2. Rectangular baths - ideal for installation in small spaces.
3. Corner products that harmoniously fit into any room design and take up little space.
4. Round bathtubs designed to be installed in the central part of the room.
5. Products non-standard forms or with a beveled corner.

Thus, the main aspects and requirements for the products are listed, which should be armed when choosing a whirlpool bath. You can read product reviews on the manufacturer's website and it will become much easier to choose the optimal and multifunctional bathroom attribute.

Bookmark this site

• Views
• Choice
• Mounting
• Finishing
• Repair
• Installation
• Device
• Cleaning

Things to Consider When Buying a Hot Tub

In any store that offers whirlpool baths, the seller will certainly colorfully describe the advantages of this product, talk about its technical characteristics and all kinds of advantages. However, it will be a good idea if you already have information on how to choose a hot tub before talking to a consultant. This will save you from purchasing both too expensive and little-functional devices.

When choosing a whirlpool tub, pay attention to thermal insulation, the better it is, the longer bath will keep warm.

Forms, sizes and material of manufacture

For the manufacture of a whirlpool bath, materials such as steel, cast iron, and acrylic are usually used.

In order to choose the right container made of a specific material, you need to take into account your own financial capabilities, operating conditions, the dimensions of the room where the bath will be mounted.

1. Steel bathtubs are inexpensive, weigh a little. The disadvantages of steel include the poor ability to retain heat for a long time and the noise that appears when the bath is filled with water.
2. Cast iron as a material for a jacuzzi is distinguished by its high specific gravity and high cost. Such a container will keep warm for a long time. However, owners of cast-iron tanks with hydromassage should be careful about enamel coating; in order to repair chips, you will have to invite a master, because special materials and tools will be required.
3. The best option when choosing a material is acrylic bathtubs with hydromassage. Acrylic keeps heat for a long time, weighs a little, and scratches can be repaired by yourself.

When the material is selected, it is necessary to determine the shapes and sizes. The choice here is quite varied: from modest sitz baths to huge tanks that look more like a small pool. The latter option is more suitable for SPA salons than for home. Therefore, in order to choose the right form of a bathtub with a hydromassage, you need to take into account the dimensions of the room and the possibility of connecting communications (water supply, electricity, sewage). Today the manufacturer offers 3 variants of shapes.

1. Rectangular. The most popular model that fits well into any, even the most small room... Regular standard sizes rectangular bathtubs with hydromassage allow the average person to completely immerse themselves in water: length - 180 cm, width 80 cm.If you only have a sitz bath in your apartment, then manufacturers usually offer products 130-150 cm long, with a width of 70-80 cm (height sitz bath - about a meter).
2. Corner. They are considered the most convenient for small housing. Corner whirlpool baths take into account anatomical features a person - in a corner jacuzzi, the body assumes a comfortable posture, which contributes to better relaxation. The usual sizes of such a bath are from 140 to 180 cm along the length of one of the sides. You can choose a bathtub with a depth of 60 to 70 cm.
3. Round. Less common than others, because for installation require a fairly spacious room. The usual sizes start from a diameter of 1.3 m. There are models for both one person and two.

A rectangular or corner whirlpool tub, if you choose a container of the appropriate size, also often fits 2 people - then a pair of headrests is included in the kit. The length of a rectangular bath in this case increases to 2 meters or more (with a width of up to 1.3 m), an angular bath - not less than 1.5 m.

Back to the table of contents

Technical, operational characteristics

Standard sizes of a rectangular whirlpool tub.

Whirlpool baths of any type are a system that includes a pump, nozzles and nozzles, and a control panel. Each technical element has its own purpose, which is good to know about.

1. Pump. In inexpensive models, one unit is used (usually with a capacity of up to 1 kW), which allows you to change the pressure of the water jets (their force) only within small limits. Whirlpool baths large sizes additionally equipped with a compressor that mixes both water and air in the nozzles. You can choose a model with a separate pump for back massage.
2. Injectors. Usually they are installed on the side walls in an amount of at least 3 pieces on each side. If there is a compressor for back massage, then put a couple more nozzles. Don't chase them big amount since in this case, the pressure will drop, and the jets will hit with less force. Sometimes micro nozzles are installed in the bottom, providing air massage, which, although it does not give a therapeutic effect, makes the procedure for taking a bath more pleasant.
3. Remote and additional elements... PU can be electronic or pneumatic. The first option is more functional, because allows you to set many additional modes. For example, changing the pressure of the jets, variable connection of nozzles, etc. Of the additional accessories, whirlpool baths can be completed with music, radio, video player, TV. Chromotherapy may also be present in the form of color-changing jets.

Even 10 years ago, a hot tub was considered a real luxury, available only for wealthy people. But times have changed. Now representatives of the middle class can also purchase a bathtub with a hydromassage function. A wide range of types and models of such bathtubs cannot but please buyers. But how do you choose a hot tub? What should be considered first, and what is the second? Let's try to figure it out together.

Forms, types, modifications of whirlpool baths

Manufacturing companies offer a variety of styles and color solutions baths. On sale there are models made of different materials... Which whirlpool tub to choose - acrylic, steel or cast iron? Each of them has its own characteristics. For example, cast iron bathtubs retain heat for a long time and do not require special maintenance. Acrylic products are easy to lift and durable. Steel baths are reliable and stable.

Types of whirlpools:

• WITH air system... There are nozzles at the bottom of such a bath. They push air into the water, causing bubbles to form. Thanks to these bubbles, a gentle massage of the skin is provided.

• With hydraulic system. On the walls and bottom of the bathtub there are special jets that supply jets of water. The direction of the water jets can be easily adjusted. Thus, it is possible to massage problem areas of the body.

• Mixed system. This is a "hybrid" of the two previous species. Such a bath model is more expensive than the others, but it is she who provides an effective effect on individual areas of the body and the body as a whole.

In shape, whirlpool baths can be:

• round

• rectangular

• corner

• oval

Which whirlpool bath to choose? It all depends on the taste preferences of the buyer, his available budget and design features bathroom. If the room is of modest size, then the corner model would be a suitable option.

We figured out the forms, types, modifications of whirlpool baths. But for the final decision-making, other factors must also be taken into account.

Benefits of hot tubs

Not all Russians understand why you need to give so much money for a bath with special functions, when regular bath costs several times cheaper.

Hydromassage is useful for people of any age category. He is shown to those experiencing serious physical and psychological stress. It is enough to lie down in the whirlpool bath for only 15-20 minutes - and there will be no trace of fatigue. You can add aromatic oils to the water, sea ​​salt and medicinal herbs in the form of decoctions.

Water massage is considered to be an excellent remedy in the fight against cellulite. The appearance of visible results should be expected after 7-10 procedures. People who regularly take hot tubs are less irritated and feel great. They are always in a great mood.

TO the benefits of whirlpool baths also include:

• Attractive appearance;
• Big choice forms and modifications;
• Reliability and durability;
• Availability of additional functions;
• Long service life.

Disadvantages of hot tubs

Before you install a bathtub with a hydromassage function at home, you need to study not only its advantages, but also its disadvantages. This will avoid wasting money and problems in the future. Disadvantages of hot tubs a little, but still they are. This is due to the materials from which the structure is made. Cast iron bath is very bulky and traumatic. Scratches and cracks may appear on the acrylic surface. And the walls steel bath do not keep warm well.

Hot tub pipes are a separate topic of conversation. They cannot be chemically treated, which creates a suitable breeding ground for bacteria.

A common disadvantage for all whirlpool baths (regardless of the material of manufacture) is their high cost. Although many buyers are willing to pay any money to improve their health.

The main dimensions of the whirlpool tubs

Answering the question “ how to choose hot tubs”, It is worth noting that its dimensions play an important role. This takes into account the size and configuration of the room. Oval, angular, round - these are hydromassage baths. How to choose suitable option? Experts advise to select a bathtub so that after its installation there is free space in the room, and the same level of comfort remains.

Let's talk about the main sizes of whirlpools:

1. Rectangular model(you can lie in such a bath). Its length is 1.7-1.8 m, and its width reaches 800 mm.

Hot tub AT-918 APOLLO Dimensions: 170 x 90 x 63 mm

2. Sitting bath with hydromassage function. The length is 1.3-1.5 m, and the width is 700-800 mm.

3. Corner model. It can have dimensions of 1500x1500 mm or 1800x1800 mm. The height of such baths is 600-700 mm.

Manufacturers

How to choose a hydromassage bath and not to miscalculate? Many buyers are chasing cheap prices. But a truly high-quality product cannot cost a penny. Some hot tub companies are catering to their customers. They release budget models excellent quality and also with a full range of functions.

We list producers you can trust:

• Bellrado company. All products undergo numerous tests and quality checks. Huge selection of bath models, different shapes and colors.
• Niagara company. The production of whirlpool baths is carried out using the latest South Korean technologies.
• Radomir company. One of many Russian manufacturers... Baths produced under this brand are distinguished by their robust construction and ease of installation.

The cost of whirlpool baths

Everyone knows that bathtubs with a hydromassage function are an order of magnitude more expensive than conventional models. Here, too, you can choose an option that is profitable for yourself. Sometimes in the cost of whirlpools includes the costs associated with their delivery and subsequent installation. In general, the price of such a bath depends on several factors: manufacturer, availability of additional functions, shape and size.

The cost of whirlpool baths varies widely. The cheapest is the BAS Tessa model (from 6 360 rubles). And expensive models can cost from 300 to 550 thousand rubles. These include products from Teuco, Victory Spa and Jacuzzi.

Now you know how to choose a hydromassage bath... First you need to decide on suitable sizes, type and shape of the bath. Then study the technical characteristics of the models presented. The final step will be the selection of a bathtub by price and manufacturer.