DIY frame chair. Do-it-yourself children's soft chair - what is required for manufacturing? Preparation for work

The production of which has a number of technological differences. The question arises - is it necessary to pay big money for ready product if you can do something similar with your own hands?

We will tell you about the process of making soft chairs, provide drawings, photographs and videos that will help you successfully cope with the task. You will also find a list of required materials and tools.

First of all, you need to decide on the upholstery material. There are significant differences both in the cost of the upholstery and in its physical properties... Let's consider the most popular options:

Velours. Velvety and fleecy fabric. Outwardly, it resembles faux fur.
Chenille. Natural material, "Diluted" with synthetic fibers. Thanks to this, the surface does not roll, it is practical and durable.
Flock. The fabric vaguely resembles velor, but experts recommend using flock for the manufacture of child seats. The fabric is easy to clean and washable, has water-repellent and wear-resistant qualities, does not fade.
Jacquard. The fabric is easy to clean and is very durable, but the structure includes synthetic fibers. Therefore, loose loops can lead to puffs.
Artificial suede. The material is fleecy and durable, does not fade and knows how to "breathe". Easy to clean is an added bonus.
Artificial leather. The material is characterized by high wear resistance. At the same time, the leather is distinguished by the presence of embossing.
Tapestry. This is a natural and very expensive fabric, which can be distinguished by the visible weaving. Multi-colored threads weaving into general structure, form beautiful drawings.

At the heart of the most primitive frame structures lies a plywood template. Therefore, you need sheets of birch plywood, screws, nails and standard set instruments:

protractor;
steel ruler;
compass;
table and hand vices;
scriber;
files;
hand scissors;
hammer;
hacksaw;
adjustable wrenches;
soldering iron;
pliers;
table anvil;
hand drill;
chisel;
sharpener;
punch;
kerner.

In the case of a bean bag chair, your toolbox will be significantly reduced. In addition, there are simplified technologies developed by folk craftsmen that allow you to collect soft armchair quickly and with a minimum set of inventory.

Photo of soft armchairs with your own hands

Made of MDF On casters Fold-out Knitted with low seat

How to make an armchair with your own hands?

Any work cannot be started without a clear plan of action. Decide on the design of the future piece of furniture. It is more difficult to create a frame chair, but it looks more respectable.

If you decide to sew a beanbag chair, get ready to master the patterns. Your actions will lie not so much in the field of furniture production as in the field of sewing art. In any case, you will need an approximate budget and an idea of \ u200b \ u200bthe consumption of materials. For example, a beanbag chair costs 1200-1300 rubles. This includes fabric for the outer (about 300-500) and inner (200-300) covers. Also, 500 rubles are pledged for the purchase of the filler.

Perhaps you already have an old "grandfather's" armchair that has lost its presentation? Then you can do it yourself and repair it, as shown in the following video:

Traditional soft product

An ordinary chair requires a solid approach and extensive preparatory phase... Consider the list of materials and tools required to make a plywood chair with upholstered upholstery:

20mm plywood;
electric drill;
emery cloth;
screws;
jigsaw;
metal headbands;
thin nails;
foam rubber;
joiner's glue;
artificial leather;
stain;
black glossy paint;
pencil;
masking tape;
roulette.

Getting started:

After downloading one of the drawings below, start large-scale work. Calculate the amount of materials and start making a template. First, cardboard templates are made, and parts from plywood are cut out from them.
The sides of the standard chair are banana-like. Also you will need cross bars... Decide on the angles of inclination, bending and dimensions of the product.
The surface of the wooden parts is cleaned and sanded. Special attention give the ends - soak them with heated linseed oil, flatten the fibers with a hammer (if bends are provided). Every detail of the frame is cut out with a jigsaw.
The sides of the seats are painted or treated with wood stain. The ends of the sidewalls are reinforced with metal rims. After that, the wrapping process begins.
An electric drill is done required holes... The rims are fixed with screws. First, the back of the back is finished with artificial leather, then the turn of other fragments of the chair comes.
To secure the fabric, you need large-headed wallpaper nails. At the back, the upholstery is fixed along the transverse parts (along the very edge), in front it should cover the slats. It is better to process the attachment points with wood glue - this will increase the level of reliability.

Bag chair

The simplest version of the bag is the so-called. You cannot do without the following materials:

coarse calico or satin (about three meters);
a piece of fabric for the outer cover (about 3.5 meters);
lightning of a meter length;
filler;
fabric for applique;
scissors, pins and thread with needles.

Manufacturing:

Copy the pattern you like from the Internet, scale it up and transfer it to the required details. For the upper and lower covers, the work will have to be done separately. The result of your efforts is a small top bottom, a large bottom and six fabric wedges.
Sew the wedges and start sewing the bag. Small plot needs to be left unprocessed. In addition, both bottoms are sewn together. Having finished with the upper case, start sewing the lower one - the procedure will be the same.
From the fabric you have chosen, you need to cut out the elements for the applique - they are adjusted on top of the cover. The zipper is sewn into one of the gussets - this will allow you to remove the cover and wash it if it gets dirty. Two-thirds of the volume of the inner cover is clogged with filler, which can be used as foam.
Having tamped the inner cover with the filler, slide it into the outer cover, then close the zipper. The beanbag chair is completely ready for use.

Pay attention to the strength of the seams of the inner cover - they should not disperse under the influence of the weight of the seated person.

How to make a children's soft chair with your own hands will be discussed further.

DIY bean bag

Baby chair

Making a frameless toddler chair is as easy as making a regular beanbag chair. The difference lies solely in the size and color of this piece of furniture. Bright, cheerful tones are welcome, which do not irritate the eyes and set you up for a positive.

A soft frame armchair for a child with your own hands can be made in the form of a semicircular "sandwich" from wooden bars and chipboard. The front wall of this design is made of plywood, the back is made of hardboard. The inner space of the glue along the bend of the backrest is filled with glued pieces of cardboard.
After waiting for the wall to dry, trim the unevenness with a construction knife. A layer of foam rubber is neatly glued on top, on which the upholstery will subsequently lie. As an upholstery fabric, you can use eco-leather or flock - these options will allow your design to survive in the unequal struggle with markers and paints.
Now about the dimensions. A standard adult chair has a height of one meter (some models reach 120 centimeters) with a diameter of the lower bottom 30 and the upper one - 15 centimeters. The height of the child seat must not exceed 60 centimeters (the diameters are 25 and 11 cm, respectively). Consider this nuance at the design stage of the pattern.

DIY frameless baby seat

Drawings and useful videos

In this section, we have selected photos of the most successful homemade armchairs that we could find on the Runet. The process of independent furniture production cannot be imagined without drawings, so we post detailed diagrams and patterns for bean bags.

Drawings of chairs for making them with your own hands

Oblique

You will also be pleased with a master class on the topic of creating an upholstered chair with your own hands. Watch the video, repeat the steps of the wizard and adhere to the described technological standards.

So, with the help of the presented video, you will learn how to make a beanbag chair with your own hands, which has gained immense popularity in our country:

By the way, if you have euro pallets available, then you can make a chair with your own hands and from such material, and then just throw a comfortable one on the seat. soft pillow... Don't believe me? Watch the following video:

Many people think that furniture manufacturing- this is magic, the secret of which a mere mortal is unable to comprehend. Believe me, having a minimum set of tools, desire, attentiveness and perseverance, you can easily cope with the task. We have presented everything you need - drawings, photos and videos, so dare and amaze your loved ones with your art!

In modern furniture stores you can find any piece of furniture for every taste and for every style. Occasionally, the financial situation or too high requirements do not allow finding a suitable chair in style and comfort.

That is why now you can find instructions on how to make a chair with your own hands step by step.

What kind of chairs can you make yourself?

On the Internet, you can find a lot of instructions on how to make a chair, which is why everyone can do it, especially if you know how to use a standard set of tools.

First you need to buy everything you need, the missing tools and materials, and then start creating sketches and drawings of the future piece of furniture.

The peculiarity of a do-it-yourself chair is that there is no difference in which sketch you use. There is a certain step-by-step instruction, points to which everyone adheres to.

Before starting work, you should familiarize yourself with the possible options for chairs and choose the one you are interested in. However, I note that some types are very difficult to do without special equipment, and for some you need a lot of experience. We also recommend that you watch a master class on how to make a chair with your own hands.

Types of chairs

If you have a question about which chair to make with your own hands, then here is a list of all possible options that you can make yourself:

Usually a chair

An ordinary chair, it is also called an upholstered chair. It consists of three main things: the frame, the upholstery, and the filler. Suitable for indoor installation.

Folding armchair

Has a frame that can be folded or unfolded. This option is simply not replaceable during outdoor recreation, the sea or even for home, if, for example, you always have a lot of guests, and there are not enough chairs for everyone.

Kentucky

Chair for a garden or a summer residence. Looks great in the garden or in the country, easy to manufacture.

Ladle

Armchair sports type, on which several belts can be installed, thereby fixing the seated person well in place.

Photon

A transforming chair that is both an armchair and a mattress. Moreover, this "transformation" is very easy to carry out.

Extendable armchair

Great for rooms small size, due to the fact that they simultaneously perform the function of both a bed and an armchair.

Armchair with small casters

It is convenient to ride on it throughout the apartment or house. It will help the elderly and sick people in the household.

However, it is worth remembering that casters under the weight of the human body can leave scratches on the floor, especially if you have lacquered parquet flooring at home.

High back armchair

Perfect for people who sit for a long time, for example, at a computer, no matter on personal initiative or at work.

Due to the fact that you can fully rely on it, it will be possible to sit in it much longer. It is also very comfortable. By the way, there are soft and hard options.

Rocking chair

Surely mention this subject furniture you associate with an elderly person. However, this type of chair helps many people, for example, those with sleep disorders or mothers of babies.

The latter not only rock the child, but also relax themselves. For example, after a sleepless night, this is a great option, you will definitely be sure that you do not drop your child due to carelessness due to fatigue.

Non-folding armchair

It is very convenient to use, it helps to fully rest and relax after a hard day's work. Now their choice is huge, so you can not only make it yourself, but also search desired option in the shop.

Previously, non-folding chairs with so-called ears were very popular, on which it was convenient to lean on and they also served as a kind of fence.

Bag chair

Probably the most comfortable chair on this list. It does not have a frame, but inside there is a soft filler that is able to completely repeat the outlines of the human body.

Due to this feature, it is really the most comfortable and you can relax and unwind in it. Not only is there a huge amount of design for these chairs, and for its manufacture you will not spend a lot of money and effort.

By the way, if you don't understand a certain type, then look at the photo of this type of chair with your own hands. So you will not only understand what kind of chair we are talking about, but you can also stumble upon step-by-step instructions for the piece of furniture you like.

So today you found out best ideas armchairs with your own hands, namely their types, which you can make yourself at home. I hope you have no questions left on the topic and you have chosen suitable type armchairs.

Photo of armchairs with your own hands

V modern world you can buy almost everything. The main thing is to make a choice among the widest assortment that is offered in the store. But sometimes financial problems do not allow you to buy a good product, for example, a comfortable high-quality chair. And some craftsmen simply do not want to buy a finished product and strive to do everything on their own. For such cases, there are special workshops on the manufacture of chairs.

Which ones can you create yourself?

Anyone can make a chair at home, the main thing is to be able to work with tools and have imagination. By purchasing necessary materials and having found some free time, you can start creating drawings, work plans and parts procurement.

It doesn't matter which drawing is used. There is a special algorithm for making a chair: creating parts, drilling holes for fasteners, greasing with glue and varnishing. Next, the process of assembling the product takes place, which takes place in accordance with the plan.

Before starting work on the manufacture of a chair, you need to determine its type. Not all chairs can be made independently, and some are completely beyond the control of a beginner.

Therefore, you need to study all the suitable options and choose the one that will definitely be within your power.

Types of chairs subject to self-made:

The soft consists of a frame, filler and upholstery. This type is suitable for harmonious relaxation, where you can sit with an interesting book or a mug of coffee.
Foldable Consists of a lightweight yet sturdy frame that can be folded down for storage or transport. This option will be indispensable when going out into the countryside or when visiting unplanned guests.
Kentucky- garden chair, consisting of bars and wire. This is a fairly easy-to-manufacture look that looks great on a summer cottage.
Ladle Is a sports chair with good fixation, which is achieved through the possibility of fastening several seat belts.
Futon- a fairly popular model, which from comfortable chair turns into a mattress with a slight movement of the hand.

Sliding performs two important functions: a full bed and a comfortable seat. Ideal for a small room.
On wheels able to move around the room thanks to the stable wheels. Such a chair can be used throughout the apartment, which may be necessary for the elderly or sick people.
High back- due to its design, it is comfortable to be in such a chair enough long time... There are many high back models available, including soft and hard ones.

Rocking chair– perfect option for peace and solitude. Such a "cradle" will rock any person, even with sleep disorders. This view armchairs are very popular among young mothers, because it is convenient to swing the baby and relax in it.
Unfolding- will create good conditions for a good rest. For the convenience of users, there are many models of fixed chairs. Chairs with ears were once popular, which served as a side support for the head and at the same time served as a guard.
Bag chair- a frameless model designed to relax a person sitting in it due to the fact that the product completely repeats the shape of his body. You can make a fluffy or leather chair that looks extraordinary. This option is the easiest to make on your own, because it does not require a lot of materials and effort.

Materials (edit)

The process of making a chair can be quite simple if you choose the right method and material. You can create a work of art both from scrap materials and from old clamshell... Some craftsmen suggest creating a comfortable seat from a chest or from a metal hoop.

To create a classic chair, as a rule, stronger materials are used to make a reliable frame. It can be made from timber, boards, plywood, willow, vine, logs, chipboard, LSP, metal and from bars.

A soft frameless product does not require a lot of time and money. It can be easily made from fabric or foam. It will look no worse than the purchased one, but it will take much more pride in the work done.

Manufacturing workshops

Nowadays, you can find different drawings for the manufacture of both frame and frameless armchairs... The master only has to choose suitable option that will meet all his expectations. After all, the drawing of the product must be chosen not only according to the criterion of complexity, but also take into account whether it will look harmoniously in the place for which it is intended.

Introducing simple step by step instructions for the manufacture of armchairs. In the next video, you will see a master class on how to make an unusual chair yourself.

Upholstered armchair

To make it, you will need plywood sheets, a soldering iron, a hacksaw, a hammer, a meter, a compass, iron scissors, a drill, self-tapping screws, a screwdriver, cloth, foam rubber and glue:

You need to start work by cutting out cardboard templates, which will then be used to make parts from plywood. The product will need transverse strips, so you need to determine their slope, size and bend in advance.
All wooden parts must be sanded. The side parts need to be painted, and the ends should be reinforced with metal rims.

Foam cushions with glue must be fixed on the seat and back. If you wish, you can glue the foam rubber on the armrests. From above, the foam rubber is additionally secured with a stapler.
To fit the product, you need to make holes and fix the rims with screws. First, the back back is trimmed with a cloth, and only then they move on to all other sections.
You need to fix all the parts together with a screwdriver and self-tapping screws. All joints and attachment points are best treated with glue.

Bag chair

To create this simple option, you will need three meters of satin, 4 meters of fabric for the cover, 1 meter of zipper, synthetic winterizer, scissors, threads, a needle and pins:

Using patterns, you need to prepare fabric parts. You should have a large bottom bottom, a small top, and six wedges. Wedges need to be sewn and both bottoms sewn together. By the same principle, you need to sew the upper cover of the product.

The zipper needs to be sewn into one of the gussets so that the cover can be easily removed and put on. Fill 2/3 of the bag with filler, then insert it into the outer cover and fasten it.

It is important to sew all the details of both covers well so that the seams do not come apart under the influence of the weight of the seated person.

Frameless child seat

A product for a child can be made of timber or chipboard. The front part is made of plywood, and the back is made of hardboard. Inside the structure, all the bends of the back must be glued with pieces of cardboard. After the glue dries, all irregularities are equal to a construction knife. Foam rubber is glued on top of the structure, after which it is upholstered with fabric.

A child seat is much smaller than an adult, so its dimensions should not exceed 60/25/15 cm.

Kentucky

To create a folding garden chair, you need to prepare self-tapping screws, round and rectangular section, sandpaper, round profile, furniture glue and fabric:

The work begins with cutting the slats and sanding them. Then, at a distance of 40 cm from their corners, holes are made, which are also polished.
In order for the back to change its position, you need to make 3 cutouts, then step back from the rails and make holes for attaching the seat.
Round slats are greased with glue and inserted into the holes.

After assembling the frame, you need to do the fabric pattern. Its length should be calculated taking into account the further folding of the product. Therefore, you will first have to fold the structure and measure the fabric. The fabric should be slightly stretched so that the person sitting in the chair is stable in it.
The fabric is fastened with round strips, after which its edges are cut off and fixed with small nails with large caps.

Armchair-bed

Backs and seats must be made of plywood sheets:

All parts must be fixed with self-tapping screws, which must be fixed with glue from above.
Everything wooden surfaces grind with sandpaper.
The side backs are made from bars. They must have legs, a handrail and five posts.
The seat is made of three parts, each of which must have a frame made of timber.
Sliding mechanism works with metal hinges... To make it work without interruption, you need to make gaps.

The seats are connected with self-tapping screws on a plywood sheet with beams. All three seats must be the same size.
Seats are fastened with iron hinges. The right part must be bolted to the sidewalls so that it stays stably in one position when the chair is pulled apart.
The legs are also secured with hinges so that they can be hidden when the chair has to be folded.
The entire product must be varnished or painted. And you can decorate the product with a foam pillow in a beautiful case, which will be done carriage coupler... Some craftsmen upholstery a chair-bed with foam rubber and fabric.

How to make new from old?

To get a new comfortable chair and feel like a real designer, you can drag the old product. After spending a little time and showing imagination, you can get an updated thing.

You will need good scissors to tighten the old product, construction stapler, upholstery fabric, chalk, foam rubber, jute harnesses and electric knives:

First you need to replace the old springs with jute harnesses. They have very good quality characteristics and increased strength. Jute needs to be sewn to back side frame staggered with a furniture pistol.
For the seat to be soft enough, you need to prepare a foam cushion. For this, a fabric seat template is made. Using chalk, outline the edges of the seat frame and cut out the foam cushion. Then you need to attach it to the seat with glue and paper clips.

Sometimes altering an old chair requires replacing not only the springs, but also the back and seat. Therefore, it is important to properly upholster the product. new cloth so that it will last a few more years. To do this, the fabric is thrown over the product and fixed with pins. All folds and irregularities must be smoothed out, otherwise you will get an untidy and ugly chair. It is best to remove the armrests during the upholstery process. This is necessary so that all corners and attachment points are even and the fabric does not stick out.

How to make a chair with your own hands.

There is no doubt - you can buy anything now. Just show your imagination, and they will offer you a lot - both in stores and on the Internet. But sometimes finances do not allow, sometimes it is easier from improvised materials (in the country, for example), and sometimes just hands itch - to do the hunt yourself. For such cases, this collection took shape.

Let's see how you can do it yourself frameless furniture, namely - a chair bag.
The budget for one chair is 40 American rubles.

This filler is polystyrene balls

Cut the fabrics - (1.4 * 2.5) for the cover for the filler and for the cover of the chair the same amount.

Stitched inner filler pouch.

Already with filler inside.

First try.

The outer cover has already been sewn. Ready. The most difficult thing was to collect all the balls, since static voltage scatters them everywhere ... I collected them with a vacuum cleaner.
Here is a pattern if anyone needs it:

I have not photographed the whole process of work in detail (there is never time for this)), but here are the main stages. I wanted to make exactly the chair. Stable and robust. It seemed as if several kids would jump on it at once (and I was right))).

So, at first such a "sandwich" was made in the form of a semicircle: chipboard - between the bars - chipboard. It turned out a base about 10 cm thick. This is so that the walls can be fixed. For the same purpose, vertical racks. Front wall - plywood; back - hardboard (it bends so well))). The bend of the back was first drawn by eye on the remnants of the wallpaper, the back is slightly higher in the back. Base on 4 legs made of old Polina wooden cubes. Polina fell in love with the chair already at this stage)) Here you can see that I began to glue cardboard, filling inner space armchairs. Not all layers are solid, most are just glued pieces, between them in some places there are gaps, this does not matter. First glued on PVA. But she soon abandoned it, because the cardboard from it swells like a wet waffle and deforms, so I had to put a load on top, wait until it dries up ... It's long and inconvenient, so after a few layers I switched to wood glue. Great thing in every way.

From the photo it is clear how the walls turned out. In the course of work and at the end, I straightened them with a knife. Everything is so easy to cut))

Further foam rubber + glue Moment Gel.
And a cover. (This was the most enjoyable part)) Done.
The chair turned out to be sooooo heavy. But I think it's a plus - at least it won't turn over)) And of course the fabric…. These are just some remnants that were found at home. The sewing machine on the armrests, although glued with non-woven fabric, cannot count on long life... But we wanted temporary furniture that would not be a pity to throw away. (In fact, it turned out to be a pity to throw it away ... The kids tore the fabric on the armrests and on the pillow, well ... my fault - I really wanted to use this particular fabric. It's a pity to throw it away - the chair itself is simply indestructible!)

well now the promised

this is what gives the product rigidity - these ribs

we continue to make the back, here we use three-layer cardboard, usually such cardboard is boxes from under refrigerators or from under cigarettes (such boxes are huge 1.20 m by 80 cm in height), even a 5-layer cardboard goes from under cigarettes, down on my chair and top shelf By the way, they were made of such cardboard, it has a width of 3-3.5 cm somewhere.)

but the bends are pasted over with cardboard thinner than usual cardboard boxes... We assemble the chair, by the way, I glued my chair with a glue gun and some other glue for wood, I don't remember, it was a long time ago.
We finish the sides, well, that's almost done, it remains to paint.

Plastic bottles are an excellent material for creativity and handy tool to solve many problems. Whatever they do. And a variety of boxes, scoops, buckets, and brooches, and curtains. They are laid instead of pipes in summer cottages, flowerbeds are decorated with them, etc. My son and I decided to make an armchair, since, as it seemed to us, there was clearly not enough such furniture in our room. We now understand that we got a little excited, not taking into account the modest dimensions of our room, but five months ago we began to collect plastic bottles with enthusiasm.

As we accumulated, we cut them accordingly and put them in "blocks" of two pieces. It looked like this: the neck of one bottle was cut off and, turning it over, it was installed in the lower part. Then the second bottle was sent neck-to-neck.

As a result, such blanks of the future chair were obtained, which are much more compact and convenient in storage than the bottles themselves.

In total, our chair took something about ninety two-liter plastic bottles... Along the way, we stocked up with scotch tape and stretch wrap.
When there were blocks enough, we started assembling. It will not be possible to clearly demonstrate this process, since at the time of writing the material, the chair had already been assembled, but I will try to simply tell you. Moreover, there is nothing complicated in this, and your imagination can tell you completely different, more interesting forms.
For the seat, we first prepared, on the basis of the existing ones, larger blocks, tightly wrapping tape every four "bottles" out of sixteen. Then, with the same adhesive tape, they combined the resulting four enlarged blocks into one.
Then came the turn of the "sides" and backrests. They are made of the same single modules, only higher ones - not from two, but from three and five bottles. The build-up scheme is pretty simple. We cut off the bottom from the top bottle, set it inward, as we did with the neck before. After that, again, with the neck down, we put the next bottle. Etc…
By the way, testing the harness for strength, we found that the blocks inside diverge. It was this moment that gave us the idea of stretch wrap. However, it seems that in this case it was possible to get by with scotch tape. But we had the film, and therefore we swaddled the base blocks with it.
We carefully tied the finished sidewalls and backrest with tape to the seat and, unable to resist the temptation, completely tightened the resulting structure with stretch film. And this is what we got in the end.

This is, so to speak, the basis. The chair is, of course, harsh and needs some work. It can be "whipped" and a cover can be sewn onto it. My chair is still covered with a blanket and is waiting for the move to the dacha, while my son and I are thinking about a bar counter made of plastic bottles for the kitchen. And what? It may very well be

We will dance from the stove, that is, from the foam rubber, which in this case is the basis for us. It is better to draw on paper, but I will show it on foam rubber for clarity.

Here is a 50cm by 50cm piece. We divide it in half cross by cross. 10 cm distance to recline the backrest.
We cut it out like this. Exactly can be cut an ordinary knife(sharp).

I have a radius of 6.5cm. In general, you need to find something round with a diameter of 13cm. And attach to outline an arc.
With a knife, cut exactly like in the picture. And we trim the rest with scissors. It turns out a little rough, but nothing. The rest will be smoothed out by the batting. We got such details.

We glue them in a row. I apply the glue with a spray gun. At home, of course, this is a problem. A brush is bad, a lot of glue will be wasted, and the seals will be from greasy smears when it dries. I think the short-pile roller is the most the best option here will be.
Here are the places where the future seams will pass. They need to be drawn on foam rubber immediately and the approximate size of the blanks should be measured by them.

In the junction of the back and seat, you need to make a cut of about 4 cm. For retraction.
Like this. Velcro will be tucked into the cut when putting on the cover, so we glue its half inside
Here is the cut set. it makes no sense for me to indicate the sizes that have turned out. They will each be slightly different. It is important to show the principle.

Parts A and B are the sidewalls. They are larger than the foam pattern by 8mm along the contour. The seam will be 10mm, + will give the thickness of the batting. This is for the cover to be tight, not loose. C - seat, D - back. Strip E is a retraction that we will put into the cut with Velcro sewn onto it. F and G - backrest. G is wider because it is sewn on with a release and covers the zipper.
Here is a schematic diagram of how the back is sewn. (then I will try to draw it more correctly). The seams are red and blue (so as not to merge. The dimensions of the F and G parts I could not immediately determine and cut out the parts with some margin, wrote down the size and cut it in place. First, after completing the knot with the zipper, I cut off the excess to fit the width, then subtract them from the original blank with a margin already wrote down the size for the next cut. Immediately as you do not measure you will not get, well, if you succeed - good. The same parsley and in length. Blanks were made with a margin, then trimmed when it was almost sewn.
Retraction unit. (from below) Everything is clear here.
The width of parts C and D is 8mm larger at the edges from the width of the foam rubber. I sew 10mm. When sewing, it is advisable to pin up the cut with pins, having previously placed marks at the locations of the transverse seams. Especially if the machine is not non-stop. The contour is large - an error occurs.
The cover is put on starting from the filling of the retractor. A twist, pressing down the foam rubber. Easier to do together, one is not comfortable.

Sitting comfortably in this chair, you can safely say that you are sitting in your own library. Indeed, such a chair is a mobile mini-library and is the ideal furniture option for book lovers. Isn't it a great idea to combine an armchair and a bookcase into a single furniture unit! There are shelves for storing books and a place for reading them at the same time.
There are enough shelves to accommodate a large number of books and magazines. Such furniture is ideal for small spaces. But you are unlikely to buy such a mini-library chair anywhere, but you can make it yourself if you follow the advice of the German magazine Selber Machen. It is recommended that all parts of the chair be made of 16 mm. MDF boards... Instead of MDF board, multi-layer plywood is quite suitable for this purpose. The dimensions of all parts of the chair are shown in the figure.

Before assembling, I process the parts with sandpaper. Especially carefully work the edges at the cutting points. Then all surfaces of the parts should be covered with two coats of furniture enamel. The color can be chosen independently and optionally, as shown in the picture, in dark tones.
The seat assembly sequence is shown in the figure.

For seat, armrests and inner cladding you will need foam rubber and furniture upholstery fabric... The color of the fabric should be in harmony with the color of the enamel used to paint the chair.

Armchair - bed (without frame)
To make 1 bed chair, you will need 2 sheets of foam rubber 10 cm wide, size 100 cm by 200 cm. Furniture fabric -3 meters, 7 locks - 80 cm zippers, reinforced threads, a little PVA glue to glue the foam rubber between the layers. Sewing machine, the ability to scribble, the desire to create. If you sew 3 chairs, it takes 5 sheets of foam rubber.

The chair consists of 4 parts
We cut the foam rubber into blanks
... square 80cm x 80cm - 2 pieces
... rectangle 80cm x 60cm - 2 pieces
... rectangle 80cm x 20cm - 2 pieces
... rectangle 80cm x 30cm - 2 pieces (see photo pink)

We glue 2 layers of 10 cm foam rubber of each part together. All parts become 20 cm high.
Then we cut the furniture fabric according to the same principle as the foam rubber (given without seam allowances).
For seams of 1-1.5 cm.
1 piece
1.1. square 80cm x 80cm - 2 pieces
1.2. rectangle 20 cm x 160 cm - 3 pieces
We fold two parts 1.3 in half, sew locks towards each other.

It turns out a prefabricated part 20 cm x 160 cm.Sew sides a) and b) and, according to the principle of a suitcase, we collect a square. Do not forget to sew the handles down to make it easier to carry the chair, just do not rush to insert the foam rubber. It must be inserted when the entire cover has been sewn-assembled completely. By the same principle, we cut and sew parts 2,3,4.
An important fact: initially provide for what principle you will connect the parts together, so that later there will be no problems. For those who know how to sew well, I suggest a sewn-in option, that is, when connecting part 1.1 with part 1.2

On both sides inner part sew in a double strip of fabric almost the entire width of the chair, as small as possible.
The smaller the gap, the tighter the parts will then be assembled into the chair.
Or you can sew up a double strip, as shown in the photo

when all 4 parts of the chair are sewn, look carefully at the photo only for the principle and the connection points.

We sew 2 piece of the chair
2.1. rectangle 80cm x 60cm - 2 pieces
2.2 rectangle 20 cm x 120 cm - 1 pc
2.3. rectangle 20 cm x 160 cm - 2 pieces
3 armchair detail
rectangle 80 (+ 6cm under the lock) cm x 60 cm - 1 piece
square 20cm x 20cm - 4 pieces
The locks for this part can be trimmed as you like. I did not sew two locks into one chair and sewed one - 80 cm, but then, when I inserted foam rubber, I was a big problem, even broke the lock and slightly tore the side of the part. To avoid such problems, do not complicate your life, sew two locks. Try to keep the locks as close as possible to each other at the meeting point.
4 armchair detail
note! - before inserting this part into the cover, I covered it with a thin layer of foam rubber and silk lining material (not necessarily new) just 80 cm wide and sewn by hand. Since on this part the lock is only sewn into the bottom 80 cm wide and it is very difficult to insert, and when covered with silk the foam rubber "slips" inside.
rectangle 20cm x 30cm - 2 pieces
rectangle 20cm x 80cm - 2 pieces
rectangle 80cm x 78cm - 1 piece

4 The armchair part can be sewn separately for the "Sofa-corner"

lay out and sleep.

And when 3 chairs are sewn, fantasize:

There is an assumption that in the future the foam rubber on the front of the seats will probably sag, I think that this is fixable: you can turn the foam rubber in the other direction, or you can add thin foam rubber layers.
Time will show. I wish you success, add your imagination. Use your material possibilities and then the furniture fabric can be applied "abruptly": Leather, fur, combining smooth with a cage, etc.
When sewing parts for internal processing I used an overlog of seams, but you can process it with edging. This will add rigidity. See how this is done on many bags and schoolbags.

And now there is enough necessary information for craftsmen who make furniture with their own hands - the ergonomics of the chair. Everyone has long known that making homemade products, including furniture, is not at all difficult. It is important that it is comfortable to use. This is where the science of ergonomics comes in handy.

Ergonomic chair dimensions.
Chair size chart developed by the Swedish Furniture Institute.
Letter Description Size
A
Seat height to edge 45 cm
B
Seat height 3 cm less than A
C
Seat tilt 3 cm
D
Seat depth 42 cm
E
Seat width min. 40 cm
G
Backrest to edge max. 42 (28-33) cm
H
Back to bottom edge 13 (18) cm
I
Backrest height min 15 cm
J
Backrest recline 18 ′
K
Projection point 18 cm
O
Distance between armrests 48 cm
P
Armrest height 23 cm
Q
Armrest length 30 cm
R
Armrest width min. 5 cm
T
Distance between edge and armrest min. 10 cm
U
Free space under the seat max. 60 ′
X
Seat-back angle 103 ′

All kids deserve a cozy place to call their own, whether it's for idleness, watching cartoons or reading. Even something as small as a comfortable seat can be.

And while you can choose from absolutely any chair in the store, wouldn't you want to make it as unique as your child? Try making a child seat yourself.

By building something with your own hands, you will get exactly what you would like, and also save money.

The most simple option there will be a pear chair, or a bag chair. The simplicity, perhaps, lies in the fact that this model is frameless.

Some tutorial videos on the Internet can be daunting in their complexity. But don't worry. Two pieces of fabric, a zipper, some straight stitching and a charming beanbag baby seat.

Necessary materials:

two cuts of fabric (fabric for upholstery is preferable - it is more durable);
zipper 60 cm long;
filler (the amount will depend on the type of material).

For seam allowances, it is necessary to leave 1.5-2 cm.

Progress:

Cut two 107 x 82 cm pieces of fabric. Cuts can be the same or different colors.
Fold the fabric right over. Sew the long raw edges with a zigzag stitch. This will prevent wear and tear. Then sew the same edges with a straight seam. It is advisable to use a short stitch length, which will also give density to the product.
Fold the fabric in half (horizontally).
Starting at the folded side, round off the ends, cutting about 15 centimeters from the corner.
Turn the fabric right out. The result is a symmetrical, rounded bend on one side. You have a rough edge again. Zigzag it, then sew it straight.
Expand the raw edge. Fold the right sides together, but now so that the seam between the two pieces of fabric is facing up.
Sew the zipper into the opening. You can use invisibility zipper, it will be almost invisible.
Close the hem of the closure with straight stitches on both sides.
Turn the finished cover onto the front side and fill with filler.

Frame chair

What it consists of:

chipboards;
plywood;
foam rubber;
special glue;
upholstery fabric.

Instruments:

self-tapping screws.

Progress:

Cut the chipboard sheets in a semicircle - this is your base. Using self-tapping screws, attach three bars (40 cm each) at an angle of 90 °.
Cut the front pillars out of plywood. Their width should be half the length of the semicircular part. The length is equal to the length of the bars.
Attach all parts to the beams with a drill and self-tapping screws.
Attach the foam rubber to the frame.
Sew a fabric over the finished fittings.

You can also use a leather substitute for covering, which is very convenient for children's furniture. Such upholstery is easy to maintain.

Keslo from tires

A great idea how to put into use the remaining plywood scraps and worn out tires after the repair.

What you need:

2 tires;
plywood;
foam rubber;
fabric for upholstery.

Instruments:

self-tapping screws;
furniture stapler.

Progress:

Install the tires one by one.
Secure together with large self-tapping screws.
Be sure to cover the lower tire with felt so as not to damage the floor in the future.
Make a plywood back. Give it the shape you want. Also attach it with self-tapping screws.
Choose a thicker foam for the inside of the seat. Cut out a circle and fill the tire with it. Then cut a larger circle to cover the top of the seat. You can use thinner foam.
Sew the foam back with a furniture stapler.
Cover the chair with upholstery.

Instead of upholstery, you can sew a cute quilted cover. The child will appreciate it!

Unfortunately, it is sometimes difficult to navigate the size and quantity of materials if you are using leftovers. Try to create your own unique model.

First, evaluate your resources: what materials and tools do you have at your disposal? Is there enough? Get down to the blueprints! Don't worry if the materials available to you are a bit off-the-wall. By connecting imagination and enthusiasm, a chair for a child can be made of anything.

What is upholstered children's furniture made of? Yes of everything:

Styrofoam;
thick cardboard;
old furniture cushions;
foam rubber without using a frame;
remnants of laminate or parquet;
polyurethane foam;
plastic bottles and whatnot.

Involve your child - he will give you a thousand ideas. Make your chair soft and comfortable. Find fun prints that you think fit with the personality of your little one. This will become an unforgettable gift not only for a holiday, but also just like that.

There are no related posts.