DIY ottoman at home. How to make a comfortable and original bean bag chair with your own hands. How to make an ottoman from a stool

Often the effect cosmetic repairs can be achieved practically without resorting to it, by introducing new details into the interior of the home, be it a wardrobe, a soft corner, or even relatively stylish looking small parts interior

An example of this would be an original ottoman, made independently or purchased from furniture store.

This article will discuss how to make an ottoman easily and without large material costs, with photos and instructions.

Fabric ottoman

To make a fabric ottoman you will need the following materials and tools:

pieces of fabric of various colors;
sewing machine;
threads, buttons and needle;
foam rubber or padding polyester filler.

In order for the ottoman to retain its shape under load and be elastic, you will need quite a lot of filler.

Work begins with making a pattern. First from a piece of suitable size thick cardboard cut out a circle of the same diameter as the product should be in its final form.

The resulting circle is divided into 6-12 parts, depending on how many types of fabric are available and what the number of segments will be for the round ottoman. Then, using these patterns, pieces of fabric are cut out with a small margin for stitching, and the same is done with the lining.

It turns out two bases - upper and lower, which are also stitched. It is important to leave one of the segments unsewn so that stuffing can be done.

The final stage of the process is stuffing the product with padding polyester or foam rubber. When stuffing, you need to pay attention to the fact that when pressed hard, the ottoman does not become deformed.

After the process is completed, the remaining unsewn segments are sewn together, and a button is sewn in the center where the petals meet on both sides of the ottoman.

Ottoman filled with polyethylene bottles

Usually plastic bottles are thrown into the trash, but there is a better option - use them as filler. For work you will need the following materials and tools:

several dozen plastic bottles;
tape, preferably wide;
lining made of padding polyester or foam rubber;
threads, needle and buttons;
sufficient amount of fabric to make a cover.

First of all, a frame is constructed from bottles with tightly screwed caps, which is held together with tape. If possible, the frame is given a rounded shape.

Then two circles of the appropriate diameter are cut out of cardboard. Also, using tape, the cardboard is attached to the bottles at the top and bottom.

Two circles of the corresponding diameter are cut out of foam rubber for the upper and lower sides, and a rectangle into which the frame is wrapped from the side. Fastening is carried out to the cardboard using a glue stapler or sewn, with foam rubber placed on the side of the glue.

The only thing left to do is to sew a cover of the appropriate shape and size for the resulting softened frame.

Thus, with minimal material costs, you get a quite decent, soft ottoman with original design.

Ottoman made from a plastic bucket

If the household has a plastic bucket without a handle, and there are no ideas where to put it, you can use it as a frame for an ottoman. In addition to the bucket, you will need hemp rope, a glue gun, cardboard, and a button. large sizes, microfiber and stapler.

The idea is this: the bucket is braided with a rope, which is immediately glued to its side surface. Next, a circle is cut out of cardboard according to the shape of the bottom of the bucket, and a circle of slightly larger diameter is also made from fabric.

In the center, the fabric and cardboard are connected with a button, which is wrapped in microfiber rolled into a tube, fixing it with a glue gun.

Wrapping is done to the edge of the cardboard, then the top layer of fabric is attached to the back side using a stapler. To complete the product, the lid and base are glued together. The cost of funds, as in previous cases, is minimal.

Photo instructions on how to make an ottoman with your own hands

If you want to update the interior of your home, but your plans do not include large financial investments, then such a wonderful piece of furniture as a soft ottoman would be an excellent solution. It will refresh the atmosphere of your home, and also add coziness and comfort.

Poufs are not only a beautiful decorative element, but also have wide functionality. They are used as a footrest, a soft seat, a pillow for a beloved animal, for storing things, etc. And if an armchair or sofa, it would be better to buy it in furniture showroom, then you can make an ottoman with your own hands, using various available means. Today you can find a lot of ideas on the Internet. self-made poufs. And what kind of materials are not used in this case, you read and simply wonder how you could have thought of this! But once you try to bring one of them to life, you immediately ask yourself: why didn’t I know this before?

First of all, we present to your attention a master class on how to make a cylindrical ottoman with your own hands. A pouf of this classic shape can be placed in the hallway, living room or bedroom.

To produce it we will need:

Cylindrical ottoman

chipboard sheet with a thickness of at least 16 mm;
wooden blocks 30x20 mm – 8 pcs.;
furniture stapler;
self-tapping screws;
screwdriver;
sheets of foam rubber and padding polyester;
glue for foam rubber;
furniture fabric (tapestry, velor, capiton, etc.);
legs or rollers.

Having decided on the required size of the future pouf, cut out two circles from sheet chipboard and one of the same from foam rubber.

We cut out chipboard circles of the required sizes and timber parts

Connect the beams and circles, securing them tightly with screws - the frame for the pouf is ready.

We connect the circles and timber with self-tapping screws into a frame

Then from chipboard sheet You should cut a rectangle with a width equal to the height of the frame and secure it around the perimeter, making a wall.

We fix a sheet of chipboard around the perimeter

Fully fixed wall

A circle of foam rubber is glued to the seat, and padding polyester is placed around the structure.

Fastening foam rubber and padding polyester

A cover is sewn from the selected upholstery fabric according to a pattern similar to the one we used to make blanks for the frame.

We make a case

Ready case

Ready-made cover - the upholstery is placed on a wooden structure and fixed at the base of the pouf using a stapler or nails.

We put on the cover and secure it at the bottom with a stapler or nails

All that remains is to attach the legs and the homemade pouf is ready!

We fasten the legs

Ready product

Following our step by step instructions You can easily sew a comfortable, original pouf with your own hands. In the same way, a square pouf is made, photo and video examples of which can be found in huge quantities on the RuNet.

Fashionable and modern: pear ottoman

Pear ottoman diagram

Next we will talk about how to sew an ottoman bag with your own hands - a very fashionable piece of furniture in modern decor interiors. You might think, isn’t it easier to buy such a corner ottoman in a store? Of course it’s easier, but much more expensive! And it is for those who value their money and have at least a little knowledge of the field of cutting and sewing that this step-by-step instruction is dedicated.

To make a soft pear ottoman you will need:

dense upholstery fabric – 320x150 mm;
fabric for the inner cover – 300x150 mm;
polystyrene foam filler with the addition of holofiber - 0.5-1 cubic meters. meter.;
pattern paper;
dense threads;
zipper – 60 cm.

The sizes of ottomans are determined mainly by the height of the people who will use them. It is better to look up to the tallest member of the family, since people with shorter stature will in any case be very comfortable sitting on a larger bag.

It is advisable to choose a fabric for upholstery that is dense to support the shape of the bag and is more resistant to wear. An excellent option would be tapestry, suede, jeans, capitonne, eco-leather, etc.

The inner cover of the pouf should be made of smooth, sliding, synthetic fabric. Thanks to this choice, the filler will move freely throughout the bag, taking the shape of the person sitting in it.

Sewing the product

The pouf pattern consists of six wedges of the bag itself and one lower part for its base.

Bean bag chair pattern

First, you need to make drawings of the required parts on paper, and then transfer them to fabric for the inside and outside of the pouf.

Cutting is carried out taking into account seam allowances of about 1.5 cm.

The parts of the bag for upholstery should be slightly larger than those intended for the filling - this will make it much easier for you to put the outer cover on the bag with filling.

The second stage of work will be sewing together all the fabric elements of the bag. First, sew the wedges together, and then proceed to the base. Don't forget to leave room for a zipper on the outer cover - the zipper will make it easier to care for the chair with the bag and will allow you to update the cover at any time. When both bags are ready, fill the inner bag with 2/3 of its volume and carefully sew the remaining areas. Place a decorative cover on top and fasten the zipper. The ottoman is ready!

Ready pouf pear

Despite the fact that such soft ottomans with a backrest are made at home, they will look great in any room in your home, adding coziness and comfort to them. In a similar way, you can create a soft place for a dog with your own hands, only in a much smaller size.

A practical piece of furniture – a pouffe with a storage box

Ottoman with drawer

We bring to your attention a brief description of how to make an ottoman with your own hands, which will combine several practical functions:

a transformable pouf with one movement of the hand can turn from a soft seat into a storage place for many different items;
an ottoman with a drawer is perfect for dressing tables, because you can not only sit comfortably on it, but also put a lot of hairdressing accessories inside, such as straightening irons, curlers, hair stylers and other items;
You can not only sit on a homemade ottoman while undressing in the hallway, but also use it at the same time as a cabinet for shoes or for storing shoe care products.

Materials for work:

chipboard sheet;
wooden beam with a section of 4x4 cm;
wood glue;
screws;
hacksaw;
construction stapler for furniture;
screwdriver or screwdriver;
foam;
padding polyester;
fabric for upholstery (velor, eco-leather, suede, capitonne, etc.);
butt hinges;
furniture casters.

Stages of work

It is necessary to cut blanks of the following sizes from a sheet of chipboard:

37x40 cm – 2 pcs;
37x37 cm – 2 pcs;
40x40 cm – 2 pcs.

Cut out four pieces of 37 cm each from a wooden beam - this will be the height of the ottoman. Next, you should assemble the box - all the side fragments are joined together, after which internal corners the bars are glued.

Ottoman frame

From the outside, all parts of the structure are secured with self-tapping screws. Glue is applied to the bottom of the beam and the bottom of the box is glued. Then you need to let the glue dry well, and then screw in the screws for reliability.

Small block stoppers for the ottoman lid

The box is covered with padding polyester and then covered with upholstery fabric using a furniture stapler. For mobility of the product, rollers can be attached to its bottom side.

The manufacture of the cover, which acts as a soft and comfortable seat, is carried out as follows: to one of the surfaces of a chipboard sheet measuring 40x40 cm, we glue padding polyester and then foam rubber.

We glue foam rubber

This way the pillow will be soft, but at the same time keep its shape.

Ottoman lid upholstery

On this wooden pouf IR ready with your own hands!

New life for old furniture - a pouf from a stool

Pouf from a stool

Next, we will talk about how to make an ottoman from a stool yourself. If you have an old one at home that has lost its presentable appearance, but at the same time it’s still a strong stool, you shouldn’t write it off. Using a little fabric and foam rubber, you can transform it with your own hands from scrap materials into a magnificent, soft and comfortable pouf.

So, how we make an ottoman from an old stool:

We cut out a piece of upholstery fabric measuring 120 cm by 34 cm for the side and a circle with a diameter of 48 cm for the pillow. To make the seat soft, cut out a circle of foam rubber and glue it to the top of the chair.
We sew a cover from fabric blanks: first you need to sew a stitch along the edge of the circle and pull it lightly. Next, you need to sew the circle to the long side of the rectangular cut, and decorate the seams with decorative cord or ribbon. Sew adhesive tape along the open edge; the bottom edge must be hemmed.
Make 4 pockets from pieces of fabric and sew them to the cover at an even distance from each other. Pockets can be decorated to taste with different decorative elements.
We put the finished cover, which took no more than an hour to make, on the stool.

Today we told you about how to make an ottoman with your own hands step by step in several options - a pouf from stools, a pouf made from chipboard and soft filling. You are given the opportunity to choose the most optimal and acceptable option for yourself, which will depend on your abilities, financial capabilities, as well as the design style of your rooms. In any case, such an original detail in the interior will not go unnoticed and will not only decorate the house for many years, but also make your holiday and life more comfortable.

Have you ever wondered how to make an ottoman with your own hands? Actually, it's not difficult. The main thing is to select the necessary materials and tools, and then follow the instructions. An ottoman is a very comfortable thing in the interior. It doesn't take up much space. You can choose many design options depending on the style of the room. In addition, making it yourself is a pleasant task that allows you to embody the most interesting ideas.

How to make a frame pouf

A frame pouf is very easy to make yourself. Such a piece of furniture will decorate the room and will serve as a chair (and a very comfortable and soft one). In addition, you can also store some small items in it.

It is necessary to prepare in advance a ruler, glue ( carpentry type), pencil, stapler (construction), hacksaw, wood screws, screwdriver and hammer. The materials you will need are special fabric, which we will use to cover the frame. It is necessary to choose exactly the one that is intended specifically for decorative upholstery upholstered furniture. In addition, you need 1 more beam with dimensions of 15 * 4 * 4 cm, a pair of piano hinges, 4 casters for furniture, chipboard with dimensions of 175 * 240 * 0.16 cm. All this is taken based on a standard ottoman with dimensions of approximately 40 *40*50 cm.

Before starting work, you need to study the step-by-step instructions. It is as follows:

First you need to make markings on the material, and then the blanks. To make the walls of the structure, you will need 2 cuts with dimensions of 37*40 cm. To decorate the side parts, you need 2 blanks that have dimensions of 37*37 cm. In addition, you need to cut 1 more square with a length and width of 40 cm.
Now you can start cutting out these parts. You can use a hacksaw for this.
The beam is supposed to be divided into 4 parts, so that each is 37 cm long.
Now you need to assemble a box from the cut out parts. The height should be 37 cm.
The completed structure is secured with wood glue. It should be applied to the inside of the product. Thanks to this, the part will be more rigid.
Now you additionally need to secure the corners with self-tapping screws - this must be done from the outside of the corners. If desired, the structure can also be strengthened with metal corners, which should be purchased first at any hardware store.
Now you need to apply an adhesive substance to the bottom side of the box. The same applies to the end side of the beams.
Glue the bottom and wait until assembled frame will dry out.
Additionally, insert self-tapping screws into the ends to strengthen the product.
Now you can start making the lid. It is necessary to fix 4 stopper bars in the inner surface of the box perimeter.
It is necessary to check that the stiffeners are correctly fixed. They should not interfere with the lifting of the pouffe cover.
Now all that remains is to do the upholstery. How to cover an ottoman is something everyone chooses independently, depending on their own preferences and the interior of the room. It is recommended to use batting, padding polyester, foam rubber, holofiber. The top can be covered with additional upholstery material.

Now the ottoman is completely ready. And this is not just a beautiful object - it can replace a chair and a small bedside table for small things.

Ottomans made from bottles and reels

At home, you can make an ottoman from the most unusual objects. For example, you can use plastic bottles. There are already many crafts made from this affordable material. A pouf made from it will not only be distinguished by its decorative properties, but will also become very practical.

It is necessary to prepare 40 plastic bottles in advance. And don’t throw away the lids from them. In addition, you also need adhesive tape - choose only a wide tape. For filling you need padding polyester or foam rubber - the material will be used for lining. Additionally, you need scissors, knitting threads, a stapler, a crochet hook or knitting needles that are used for knitting. And of course, you need to choose decorative fabric for the upholstery.

A DIY ottoman looks like this step by step:

First, make a structure out of bottles. All containers must be tightly closed with lids. Use tape to connect parts. It is necessary to make several layers of plastic bottles. You can fix all the bottles at once, but experts advise fixing them only a few at a time - this will increase the strength of the structure. When the sections are received, they must also be secured together.
Now you will need to start making a cardboard pattern. To do this, you simply need to attach the workpiece to a circle, the diameter of which is approximately 40 cm. Then draw lines with a pencil. After this, cut out 2 circles. Both blanks must be placed on both sides of the improvised pouf and secured with tape.
Next we need to do the lining. It is necessary to cut 2 circles of the same diameter as the previous blanks. In addition, you also need to cut out a rectangle that is supposed to wrap the structure on the sides. Using a stapler, you should fix the foam rubber or other material used for linings on the structure. The linings will still need to be additionally sewn together along the connecting lines.
It is necessary to make a cover. Any thick fabric can be used for this. You can choose a special material that is used for upholstering upholstered furniture, but if this is not possible, then any other material will do - the main thing is that it is dense enough.
At the end, all that remains is to sew the sides and top parts of the pouf to the bottom part.

Now the pouf from ordinary plastic bottles is ready. By the way, it can be made with a backrest. In this case, it is still necessary to make a blank of the shape that the pouf should have. The back of the product should also be covered with foam rubber and decorative fabric.

You can make a round ottoman from a reel with your own hands. If the interior of the room is rustic or classic style, then you can decorate it with a pouf made from a reel. The result is a durable and reliable product that can be decorated as you wish. The pouf will turn out to be original and interesting.

You need to find a wooden spool. It can be made not from wood, but from chipboard - this option is also suitable. Cardboard is also needed upholstery, batting or foam rubber, polystyrene foam and adhesive mass. The tools you need to prepare in advance are a drill, stapler and sewing machine.

Instructions for creating a pouf are as follows:

Cut out parts with the planned shape from foam plastic. They should be the same size as the tops of the coil. Use glue to secure the parts.
Now you need to make a template to work with the soft layer and decorative fabric. To do this, cut out a circle on paper or film with the same dimensions as the tops of the coil, but you still need to make a small allowance to sew these parts together.
Wooden circles are supposed to be smeared with glue and circles cut from foam rubber are attached to them.
It is necessary to wrap the entire structure with cardboard and fix it with glue and a stapler.
After this, you need to wrap the pouf in batting and also secure it with a stapler. You have to measure everything first, and then remove everything unnecessary.
All that remains is to do the upholstery. The material should be stretched, but not too tightly.

In the end, all that remains is to attach the legs to the structure.

How to make fabric poufs

You can make a multi-colored pouf from fabric. The original product comes out. It will require different pieces of fabric, but they should all match each other in shades. In addition, fillers and lining material are needed. Large buttons are also needed.

The algorithm of actions is quite simple:

First think about the pattern. It is necessary to draw a circle whose diameter will be the same as that of the planned product. Next, divide the circle into 4 parts, and then each piece obtained into 3 more. Now you need to cut out pieces in the shape of petals from the fabric. Be sure to leave a couple more centimeters to connect the joints. The same should be done with the lining material.
Connect all the parts.
Now make the bottom part of the product. It is best to use thick fabric. The top and bottom of the pouf need to be sewn from the inside out. At the same time, do not sew up 1 petal-shaped part at the end.
Now you need to turn the material out and use the filler.
In the end, all that remains is to sew the remaining places and disguise the seams with large buttons, attaching them to the top and bottom of the structure.

You can also make an interesting and simple pouf from an ordinary sweater. Such an item will fit into any interior, and anyone can handle its creation. You need to find a suitable sweater - you can even take a worn one, but it is recommended to choose a wool product.

Another interesting option is a pouf that looks like a ball. To create it, you only need polyethylene, fillers, graph paper (to make a pattern) and various fabrics in two shades. This ottoman is very simple, but at the same time comfortable and will definitely fit into any room.

Conclusion

Among all the listed options, everyone can find the one that suits them best. All the instructions described are very simple, so even a beginner can cope with this task and make a pouf with their own hands. This piece of furniture is very comfortable and practical. In addition, it will also decorate the room.

How to make an ottoman with your own hands without throwing money away? Of course, you can buy it in a furniture store, but looking at the cost of a simple chipboard product, you will want to do crafts at home. If we consider furniture sets as a whole, then most of them belong to rather complex structures.

Experienced craftsmen can make something from this list with their own hands, and only the ottoman is made without special skills and knowledge from improvised means. A practical item will be obtained when you choose a durable and high-quality upholstery fabric that can be wiped, cleaned, and washed.

Such materials include leather or furniture fabric sold in specialized stores. All that remains is to view the step-by-step instructions for making ottomans various forms.

So:

An ottoman for seating several people is comparable in height to an armchair and more like a soft bench. For the home, such a model is inconvenient and unnecessary, but in fitting and waiting areas it is very relevant.
An ottoman in addition to something with a certain height. From the definition itself it becomes clear that it does not act an independent product, but serves as an application. Models that barely rise above the floor are not intended for sitting on, but are used as footrests for adults. Children love these things in miniature and enjoy using them in their games.
Complementing armchairs, sofas, beds, sliding under the table or as a component in a non-standard combination (beach cabin with pouf), ottomans firmly occupy a niche in furniture showrooms. One can say more, there is a fashion for designer items that make the interior fashionable, complementing it.
The video in this article introduces poufs with advanced features. Looking through it, you remember the plot of the film, when “with a slight movement of the hand, trousers turn into shorts,” and here the ottoman transforms into a full-fledged chair with a table, a bed with a lamp stand and other necessary items, while taking up a minimum of space.

Before you start making an ottoman with your own hands, you need to have an idea about this seemingly simple furniture family.

So, poufs are classified according to materials, design, functions and shapes:

Soft products use textiles, leather. It’s nice to throw your legs on a hand-knitted ottoman, and when the size allows, you can lounge on it.
Rigid ottoman designs are made from rattan, wood, often varnished, and cork tree bark.. Hard ottomans, made with your own hands, are not suitable for long-term sitting, but they bring liveliness and intrigue to the interior.

Attention: An ottoman is definitely a necessary thing, and its need is felt when entering the house, or rather, the hallway.

How to make, sew, knit and what design of an ottoman to choose is not an easy task. Ottomans can be with exposed frames made of steel tubes or tree.
The ottoman may have a closed frame, and the legs are hidden under the frills of a decorative skirt. Such products are popular among the British and Americans.
Ottoman with barely visible legs when a chair is copied without armrests and backrest.
DIY ottoman with back- not only a comfortable chair for members of the whole family, regardless of body weight, but also excellent support for a sore back.
What could be simpler than an inflatable ottoman?, consisting of a textile cover with a zipper and an inflatable chamber inside it? Ottomans differ not only in materials and designs, but also in shape.
DIY square ottoman, round, triangular, combined from different geometric shapes, can be made from available materials.

Tools at home

How to make an ottoman yourself if you don’t have the skills or desire to saw, cut, or twist? Craftsmen offer a lot of ideas and proposals that are brought to life. The work of making a cute ottoman is not difficult, but quite exciting, and a thing made with your own hands radiates a special warmth and has an aura of home comfort.

Soft ottomans

The most simple circuit How to make a soft ottoman with your own hands is as follows:

Two circles are cut out of fabric with a diameter equal to the diameter of the upper and lower parts of the product.

Tip: When cutting out parts, remember to leave seam allowances.

Two rectangular parts of the same size are cut out:

width of the height of the pouf;
length equal to half the circumference of the top and bottom of the pouf.

Rectangular parts are sewn together on one side along the width to obtain a long ribbon.
One of the circles is basted to it and sewed along the seam.
The same is done with the second circle.

Tip: If the seam is not too even or neat, it is trimmed with a decorative border.

The resulting pouf cover is stuffed with any suitable material.
A zipper is sewn into the unstitched edges remaining in the rectangular tape.

The photo shows a diagram of how to make a pouf in the simplest way.

In a similar way, you can make an ottoman in the shape of a cube. The difference is in making the pieces, which must be square in shape, and to make the sides you will need to make four pieces of fabric rather than two.

Then:

The details fit together.
To more clearly indicate the edges of the cube, you can use a canvas of a different contrasting color.
A denser fabric will provide additional strength and elasticity.
Such a pouf can be filled with padding polyester and foam rubber. These materials hold their shape perfectly and do not deform.
The hole for stuffing the material is made at the bottom of the pouf so that it is not visible.
If desired, it can be stitched tightly after stuffing the pouf, or a zipper can be sewn in so that the material can be replaced if necessary.

Sewing an ottoman

The video in this article demonstrates the procedure for sewing an 8-piece ottoman. To do this, a sheet of paper is folded in four, a template is drawn on it and cut out according to the diagram below.

The unfolded template is fixed on the fabric and cutting of blanks in the amount of 8 pieces begins.

Attention: It is not necessary to purchase new fabric for the pattern; you can use old deposits of knitted clothes and old sweaters.

The photo below shows that sharp end Each hexagon is bent inward by approximately 5-6 cm and stitched on a machine, which makes it possible to obtain an octagonal hole for stuffing the finished product after assembling all the elements.

The blanks are attached to each other in pairs with a distance from the edge of approximately 1 cm. The pairs are folded with the front side so that the seams are on the wrong side; when sewn, there are 4 segments of 2 blanks.
In the same way, they are sewn together in 2 sections and you get 2 halves of the future ottoman.
The halves are connected to each other by machine, the cover is turned right side out.
The ottoman is stuffed with prepared filling (holofiber, foam rubber, padding polyester), and the hole is closed with a lid of the appropriate size. The edges of the lid should already be finished, and it is manually, carefully sewn on top of the stuffing hole.
The instructions for beginners recommend sewing an ottoman with literally three seams. Why cut out 2 circles, the diameter of which is about 50 cm, or 2 squares, if you prefer clear lines. Geometric shapes will serve as the top or bottom of the future product.
A strip of the same material or another is cut out in a size corresponding to the length of the circle or the perimeter of the square; the width of the strip depends on the height of the ottoman. The height of the ottoman, in turn, is selected depending on the function that the product will perform, whether it is a footrest, a seat in the hallway, a toy for young children, or a structure in the living room.

Attention: The cutting of the strip for the side of the ottoman is done taking into account seam allowances.

The work is done in such a way that the seams are on the wrong side, the strip is sewn first of all to the bottom of the product and only then to the top.
After stitching all the seams, the ottoman is turned right side out and stuffed.
Using the same patterns presented above, covers for the ottoman with a zipper are cut out for the first option and for the second. This will allow you to wash or clean the cover in the future without unnecessary problems and time-consuming, and without having to solve the problem of how to cover the ottoman with fabric if it is already made of fabric.

Reliable base for plastic bottles

Plastic bottles are available in every home in unlimited quantities. Take, for example, beer and water bottles with a capacity of 1.5 - 2 liters; their color in the finished product does not matter, and they will help unload debris in the yard and house.

To make a good, stable ottoman you will need at least 16 1.5 liter bottles or 9 2 liter bottles.
Cardboard packaging from household appliances also waits its turn and is not thrown away for years, but what if the refrigerator breaks down, how do you take it for repairs? The video in this article will show how cardboard is used to make an ottoman from plastic bottles.

You need to stock up on tape, foam rubber and upholstery material.

Hot glue gun, zipper for case.

Attention: From round bottles you can make an even larger circle, square or rectangle, that is, the shape of the product is chosen according to your preferences.

For ease of use, if a very large ottoman is planned, the bottles are connected into separate sectors and sections with tape, and then the formation of the overall structure begins.

If the future product is planned to be round in shape, then the ottoman should be made starting from the middle.
To do this, take a bottle and, using radial movements, attach new elements to it, which are carefully fixed to each other with tape.
After completing the circle, cut out a base from thick cardboard. It should be slightly larger in size than the bottle structure.

The cardboard is also secured with several layers of adhesive tape. There is no need to dwell once again on the point that 2 bases must be prepared, and everything is clear.
Now it’s the turn of the soft upholstery, for which two parts for the top and bottom are cut out of dense foam rubber, which are glued in place.
From the remaining part of the foam rubber, according to the dimensions of the circumference line of the side part, a rectangle is cut out, which is wrapped around the pouf.
All that remains is the final stage of sewing a cover made of furniture fabric, preferably with a zipper. This operation will allow you not only to easily remove the cover for washing, but also to make several options and update the appearance of your product from time to time.

Ottoman from grandma's rarity

How to make an ottoman out of a stool so that grandma’s rarity can serve for many more years?

Indeed, a well-built stool made of durable wood, painted with oil paint, can delight its owners for many years, but the appearance does not match modern environment. Remaking an old stool into a stylish ottoman will help bring balance to the interior.

The stool structure is first strengthened with self-tapping screws.
The legs are shortened a little - do not forget to check the level so that the ottoman does not wobble later.
The frame of the future ottoman is assembled using 4 sheets of plywood. They are attached with self-tapping screws to the legs of the stool.
The fifth sheet of plywood is screwed from below and serves as the bottom of the future craft.
The foam for the seat is cut out with an allowance of 5 cm.

Attention: The upper part of the ottoman is coated with glue, then the foam rubber will not bunch up into an untidy lump over time.

The upholstery fabric on the seat is attached together with the foam rubber using staplers.
Foam rubber can be attached to the sides with slats, which help give the ottoman a round shape and make it more beautiful.
The rest of the structure is covered with fabric and secured with staples.
The wheels are screwed on or, as in the photo above, the cute little legs of the updated stool peek out from under the flirty upholstery.
The problem of how to make an ottoman from a stool was solved in a short time.

For those who like to knock

The rich Russian language raises many associations and questions. How to knock, where to knock, when to knock? For those who like to hit a nail with a hammer, we suggest making an ottoman with your own hands from boards and chipboard.

Rectangular pieces of 40x30 cm from chipboard are pre-prepared in the amount of 4 pieces.
A circle with a diameter of 30 cm and 4 wooden blocks.
Wood glue.
Furniture wheels with special fasteners.
Metal corners, screws.
Foam rubber and upholstery fabric.

As you can see, the set of necessary materials does not differ much from each other when we make an ottoman with our own hands, even in different ways:

A box is assembled from rectangles. Metal corners and self-tapping screws are used, all corners of the structure are aligned, they must be straight.
The bars on which the wheels will later be located are fixed with glue on the lower part.
A base is attached to the top in an individually selected shape.
The finished frame is upholstered using the same technology using foam rubber, fabric and a zipper on the cover.

For lovers of knitting and stuffing

How to make an ottoman with your own hands that is frameless and therefore soft. Needlewomen who know how to crochet will be able to knit a soft ottoman much faster, but not everyone may like their appearance.

Lovers of working with knitting needles present interesting models of ottomans knitted with them:

To work, you will need the thickest knitting needles that are available in stores.
For knitting needles with a diameter of 9 mm, fairly thick wool is suitable.
Ordinary threads offered in stores are too thin. The price for them is not high, but due to the fact that you will have to make thicker ones out of them, weaving them together, you will have to purchase a fairly large quantity, which will add to the cost of the product.
You can, of course, cut, unravel, and twist unnecessary knitwear, which takes a lot of time, and finding the right amount of plain knitted clothing at home that has become unusable is quite problematic.
It seems that the solution to the problem of how to make an ottoman with your own hands has reached a dead end, but cotton clotheslines caught my eye.

Attention: Synthetic clotheslines are not suitable for this job, and cotton ropes are difficult to buy in small towns.

For a soft ottoman of sufficient size, you will need 20-30 of these ropes, which are tied into a long rectangle.
The side is tied together with rope to create a spacious, wide skirt.
The bottom is tied with a rope of the same color and you get a bag that needs to be stuffed with something. There are 2 options here - use old items neatly stacked on shelves in the closet or go to the store and buy foam rubber or holofiber.

Unnecessary old items make the ottoman heavy and not as round and fluffy as those made from store-bought materials, but it frees up space in the closet for new clothes.
The top of the ottoman is decorated with the same rope and you can try out your product.

Ottoman from an old bucket

Here is another interesting solution for which we will need: an old plastic bucket, thick jute rope, a hot glue gun, a stapler, scissors, a cabinet handle, Velcro tape, upholstery fabric and a few new microfiber cloths. You will also need cardboard, but it will be better if you replace it with thin plywood.

First, wash the bucket and remove the metal handle.

Next, using hot glue, glue the outer surface of the bucket with rope, starting from the bottom.

Cut the end of the rope and hide it carefully.

Place the bottom of the bucket on the cardboard and trace it. Lay out the upholstery fabric according to the intended template and cut the round blank with a 5-centimeter outlet.

We make a hole in the center of the cardboard and fabric. We pass a bolt from a furniture handle through them and screw on the knob.

Next, we roll the fiber into tubes and radially wrap the bolt between the cardboard and paper, creating a kind of roll. To prevent the fiber from unwinding, we securely fix it with glue.

The fabric is then stretched and secured with reverse side stapler.

To hide the cardboard marks, cover the back of the seat with another piece of fabric, which needs to be placed on glue.

Cut the Velcro into four equal pieces and stick them crosswise onto the bottom of the bucket and the base of the saddle - with the bristles towards the bucket and the fluffy part towards the seat. Connect the two parts. Hooray! The ottoman is ready!

The result is something like this useful craft, on which you can sit comfortably.

Various options provide the opportunity to solve the problem of how to make an ottoman yourself from scrap materials, which are available in abundance in any home. The only thing I still wanted to focus on was the floor in the room.

Laminate is quite sensitive to mechanical stress, so it is better to make an ottoman without wheels and legs, that is, with a solid bottom. On soft surfaces, carpet, ottomans on casters are appropriate, but for tiled flooring there are no restrictions, unless forged legs can be an exception.

Chipboard ottoman

In one toast, the hero of “Prisoner of the Caucasus” expressed the very essence of existence, so that “our desires coincide with our capabilities.” If you have free time and a desire to make an ottoman with your own hands from chipboard, you need to prepare the possibilities.

Tools and necessary materials are stocked in advance.

A good ottoman cannot be made without a good base made from a sheet of chipboard. Optimal size the design is within the range of 400x400x500 mm.
You can make a wooden ottoman using a simplified technology, making a frame in the form mailbox from timber and screw it on by cutting the sides, but since the ottoman is being made for yourself, you can try.

Work with pleasure

You should not start work in a bad mood: something will fall on your foot or you will hit the wrong nail with a hammer.

5 squares of 400x400 mm are marked and cut from a sheet of chipboard to make the walls of the structure and the bottom.

Attention: The bottom of the ottoman should not be made of plywood; small children like to hide in secluded corners, can break through thin plywood and cause injury.

The lid can be made in any geometric shape: square, round, oval. Beginners may not want to experiment and just stick with a square lid. It will have dimensions slightly larger than the main box 430x430 mm, in order to protect it from falling inside.
The height of the finished product is made up of its constituent elements - the height of the structure is 400 mm, plus the rollers are 50 mm, the bottom and tire are 32 mm thick, the upholstery is 50 mm thick, for a total of 532 mm.
From the prepared elements, the formation of the structure begins.
The sides of the ottoman are fastened with metal corners. The beams that glue all the internal corners will help increase rigidity and reliability.
From the front side of the ottoman, the cutouts themselves are screwed into the beams, the heads of which should be recessed into the wood so that later there are no problems with torn upholstery.
The lower part of the box is coated with wood glue along the perimeter, capturing the ends of the beams.
The bottom of the ottoman is attached, and the cuts themselves are again screwed into the ends of the beams. Assembled structure should dry well.
The base of the ottoman has been made, but there are still no wheels and a lid on which you can sit in the future.
The lid is secured with 4 bars screwed from the inside. The work is carried out after you are sure that the lid closes smoothly and the side reinforcement bars do not interfere with the closing of the lid.
The finished structure is turned over, and the wheels themselves are attached with the cuts.

Attention: They are fixed through the bottom to the ends of the beams, for which small holes are drilled in the bottom.

Before continuing work, you need to make sure that the resulting structure is sufficiently stable, holds the person sitting on it well and there are no shortcomings that would interfere with further work, otherwise there is no point in starting the upholstery.

The ottoman gets dressed

A do-it-yourself ottoman made of wood, chipboard, or generally soft needs clothing on top. This function is performed with honor by high-quality upholstery fabric, neatly attached to the frame of the structure.

First, the cover of the ottoman is made, for which a soft lining is cut out from foam rubber, padding polyester, and batting. The size of the pad must correspond to the parameters of the seat so that it is neatly glued into place without drooping.
From the fabric intended for upholstery, a blank is cut out to be somewhat larger in size than the lid. This is done so that the edges can be folded under the lid and secured from the inside with a stapler or furniture nails.
The instructions instruct you to further design the sides of the ottoman.
A part is cut out from upholstery fabric 400 mm x 4 = 1600 mm with a margin for connection. Also in height, the material must have an allowance at the top and bottom.

Attention: The fabric must be straightened, stretched, tucked inward, and the edges must be secured with furniture nails or a stapler.

The seat is decorated, the niche is upholstered, all edges are carefully closed and the finished product can be presented to discerning family members for inspection.
A do-it-yourself plywood ottoman is made according to the same pattern if you choose this simple design option.
The work becomes a little more complicated when an opening drawer is provided on the ottoman, then the stop bars are replaced with door hinges.

Getting acquainted with the design of this simple piece of furniture, one detail catches your eye: despite the difference in shapes of ottomans and their types, the base is a rigid frame, there is a seat and legs. They are decorated in different ways, but quilted leather or leatherette gives the products an elite, luxurious look and you cannot immediately determine that the price of the product is within reasonable limits.

Although, it should be noted that a neat ottoman, covered with a different material, can bring comfort and convenience to the room and looks no less elegant than a leather one.

DIY ottoman - simple instructions for creating stylish and high-quality furniture (110 photos)

A pouf is a small and very functional piece of furniture. Its popularity has not decreased at all over recent years. Now this useful piece of furniture is as popular as ever. Making it can be the first step towards starting your own production of upholstered furniture. This will allow you to first try your hand and work out the technology.

This short review will describe how to make an ottoman with your own hands. The assembled product will be a wonderful addition to the interior of the living room or hallway.

Choice of design and construction

This item is the easiest to produce, so even the most novice craftsman can handle its production. Before starting work, you first need to decide on the design of the future product. Studying photos of various ottomans will help with this.

The ottoman can have a rigid frame or do without one at all. Can be used as a frame various materials. The most commonly used classic carpentry materials are boards, plywood, and chipboard.

Ottoman frame

Assembling this item is not difficult. Let's figure out what and with what materials you can make a pouf with your own hands. Depending on the design used different instruments and materials.

Frameless pouf

The simplest soft ottoman without a rigid frame is made using a minimal set of tools. To do this, you need to sew a bag with a lining and fill it with granulated polystyrene foam, specially produced in the form of balls for stuffing furniture. Therefore, it is easy to purchase at a hardware store or on the market.

Tire pouf

A new and quite popular model now are ottomans from the old car tire. Making them is also very simple. This will require old tire preferably mounted on a metal disk for rigidity.

If the tire does not have a disk, then the rigidity of the structure can be given wooden partitions installed inside the tire.

note

In order to make such an ottoman, you need to cut two circles from plywood 3-5 millimeters thick and attach them with screws to the tire at the top and bottom to create horizontal planes. Then, using quick-drying glue, glue the rope to the surface from the center to the edges in a spiral.

Perhaps such a piece of furniture will not fit into the living room or bedroom, but it may be suitable for a home workshop or office. In this case, you can try not to decorate its surface with rope, but only stick a soft seat on the upper surface, leaving the rubber untouched.

Pouf made from plastic bottles

Such furniture can be made from a variety of materials. For example, you can even use plastic bottles and old buckets as a frame, but it is better to use more durable materials. They are not so expensive in price and their consumption is very small.

With their help, you can create an ottoman of any size and shape and add additional structural elements to it: assemble an ottoman with a hinged lid, drawer For various little things, legs or rollers.

Pouf made of plywood, chipboard

Poufs with a frame made of chipboard, wood or plywood are quite simple to make. Such products can be heavily loaded and can be used as an ordinary stool

To create it, it is first cut in accordance with the drawing. sheet material. It is fastened with screws and wooden blocks fixed along the edges of the sheets. Small irregularities will be hidden by soft upholstery and finishing fabric.

The pouf may have a liftable lid attached to hinges. It will be possible to store small things in it, but for this you need to make a bottom. The lid, depending on the base, can have a different shape: round, square.

Lining

The next step is to attach the soft lining. For these purposes, padding polyester or foam rubber is used, which is attached using construction staples and glue. A decorative covering made of fabric or leather is attached the same way over soft upholstery.

The color and type of coating determines the design of the product as much as its frame. The finish of a product defines it overall design, so it depends on how well the product fits into the interior. Since the product turns out to be quite small, it is quite possible to use the most daring color solutions, which will almost always be appropriate.

When making any furniture, the main thing is to patiently complete all the work, carefully following each step. You can make an ottoman with your own hands from almost anything; you can use a wide variety of materials and ideas.

The most important thing is that for this you will be rewarded with a new piece of furniture that will serve you for many years, delighting you with a pleasant appearance.

Photos of do-it-yourself ottomans

Making an ottoman with your own hands: choosing the design and construction of the product

When you want to bring something new into the interior or update your style, additional furniture attributes will help you. For example, anyone can make an ottoman with their own hands - how experienced master handicrafts, and a beginner in this field.

Poufs are popular for a reason, because they can be used as a chair, table or as a footrest.

Poufs are popular for a reason, because they can be used as a chair, table or as a footrest. Plus, they take up little space, which is a huge plus for homes with limited space.

You are not limited in the choice of shape, parameters and raw materials.

Ottomans made by yourself have many advantages: you are not limited in the choice of shape, parameters and raw materials. To create an ottoman, you can use any available materials and it will not require large expenses, or it will be completely free.

Handmade ottomans have many advantages.

Anyone can make an ottoman with their own hands, regardless of skill level. Some of the available models will be from plastic bottles or tires.

With a little more effort, you can make a pouf from boards. And if you have carpentry skills, you can easily make a wooden pouf with drawers.

According to the instructions, you will receive a high-quality, original piece of furniture that will serve you for a long time.

A pouf bag that will delight children will be original and quite simple to make. To create it, you will need to sew a bag with a lining and fill it with polystyrene foam - it is sold in many construction supermarkets.

Having experience in cutting and sewing, you can create a unique product of any shape and model.

In any case, the main thing is to patiently and slowly follow each step, according to the instructions, then you will receive a high-quality, original piece of furniture that will serve you for a long time.

Anyone can make an ottoman with their own hands, regardless of skill level.

Pouf made from plastic bottles.

Anyone can make it, for this take:

plastic bottles, volume 1.5-2 liters;
thick cardboard (equipment packaging will do);
foam;
upholstery fabric;
scissors;
thread, needle;
scotch;
glue.

When the ottoman is ready, the hole can be sewn tightly or a zipper can be sewn in its place.

Next, start finishing the product - cut out two round and one rectangular parts from foam rubber, be sure to leave some allowance for seam allowances. Connect them together with strong stitches. Instead of foam rubber, you can use padding polyester, insulation, or dense fabric folded in several layers.

Anyone can make an ottoman with their own hands - both an experienced craftsman and a beginner in this field.

Some of the available ones will be models made from plastic bottles or tires.

DIY ottoman from an old bucket.

To create it you will need the following materials and tools:

jute rope;
construction glue gun;
cardboard;
upholstery fabric;
microfiber;
stapler;
large button.

Remove the handle from the bucket, place it upside down and wind the rope tightly in a circle. In order for it to hold well, each stitch must be placed on glue.

Instead of foam rubber, you can use padding polyester, insulation, or dense fabric folded in several layers.

When the entire bucket is wrapped in rope, proceed to making the ottoman seat. Make a circle out of thick cardboard that matches the diameter of the bucket. Prepare a circle from fabric too, but 10 centimeters larger. Using a button in the center, connect the fabric and cardboard.

Shape the microfiber into a tube, wrap it around the button between the fabric and the cardboard, fixing it glue gun. Fill the cardboard base to the brim with tubes. The top fabric should be stapled to the back of the cardboard.

Now glue the part to the base and the work on the ottoman is completed.

First you will need to cut out two equal round parts (or squares if you want to get square ottoman) suitable size- this will be the top and bottom of the ottoman.

Tire pouf - great idea for a cottage or living room.

Prepare the following materials and tools:

old tire;
twine (at least 20 meters long);
self-tapping screws;
glue gun;
a sheet of plywood 3-5 millimeters thick;
jigsaw;
electric drill.

First, you should measure the inner diameter of the tire before it thickens, divide this value in half and add one and a half centimeters to the result - you get the radius of the desired circle.

You can also add a strap, which makes it possible to easily move the product.

Draw it on a sheet of plywood and cut it out with a jigsaw. You should make two circles - on the seat and the bottom of the ottoman. Then drill holes in the tire and plywood, secure the parts together with self-tapping screws.

note

Now you can glue the rope to the tire. To create a unique design, start from the center of the seat, laying the twine in a snail pattern.

The top fabric should be stapled to the back of the cardboard.

Use clear, fast-drying, high-strength adhesive.

When the top of the pouf is completely covered, proceed to the sides of the tire. To make it easier to attach the twine, turn the product over from top to bottom. After the first circle, let the glue dry thoroughly to avoid the rope moving.

Make a case for the ottoman according to the above diagram.

When the glue has dried well, coat the finished pouf with clear varnish.

The product can be decorated with legs or wheels.

As decoration, attach buttons, rhinestones or borders to the seams.

How to make an ottoman quickly without patterns.

For work, prepare:

textile;
stuffing material;
scissors;
needle, thread;
measuring tape.

Prepare two identical ones from fabric round element, the parameters of which are equal to the top and bottom of the product. Allow a few extra inches for seams.

First, measure the inner diameter of the tire before it thickens.

Then cut out two equal rectangles - their width is the height of the ottoman, their length is half the circumference of the upper and lower zones.

The seams can be decorated with ribbons and borders.

Apply seams to the resulting rectangular elements from one edge so that they form a long ribbon.

Then you need to baste the first circle to it, stitch along the seam. Then do the same with the next circle. The seams can be decorated with ribbons and borders.

Do not rush, apply a lot of glue, process the future pouf circle by circle.

This is how you can make a pouf cover without wasting time on patterns. The filler can be different different materials. To prevent the opening for stuffing from being noticeable, place it at the bottom of the product. When the ottoman is ready, the hole can be sewn tightly or a zipper can be sewn in its place.

Following this description, you can build a cube ottoman.

Following this description, you can build a cube ottoman. The only difference is that all the parts should be made square, and there are four of them in the side parts. In order for the product to better hold its shape, use dense fabrics, and choose synthetic padding or foam rubber as a filler.

In order for the product to better hold its shape, use dense fabrics, and choose synthetic padding or foam rubber as a filler.

There is a whole host of available unusual ideas how to make an ottoman with your own hands, don’t be afraid to imagine and experiment.

There are a whole lot of affordable, unusual ideas on how to make an ottoman with your own hands, don’t be afraid to fantasize and experiment.

VIDEO: How to make a round ottoman with your own hands

50 photo ideas: making your own ottoman for your home

Making a banquette with your own hands

A banquette can be called a popular type of furniture for the hallway. Over time, its design has not undergone fundamental changes. This is not only a comfortable pouf on which to accommodate guests, but also a stylish…

How to make a beanbag with your own hands?

Furniture is part of the design of any room. Poufs are a type of upholstered furniture that is suitable for a children's room, living room, public places and garden. The buyer has a choice in stores...

How to make a chair cover with your own hands.

Upholstered furniture is the basis for creating a cozy atmosphere in any home. But no matter how much care is taken for upholstered furniture, including armchairs, sooner or later the upholstery is subject to wear and tear. And absolutely...

How to choose the right ottoman bed with lifting mechanism.

Man came up with upholstered furniture to make it as comfortable as possible during sleep and relaxation. This also includes an ottoman with a lifting mechanism. When choosing furniture, we, of course, first of all determine...

How to make a knitted pouf with your own hands: master class

To complete the interior style, decorative elements are needed. A knitted pouf can be an excellent addition to the decor in any room: children's room, bedroom, living room, hallway. What is this item...

We clean upholstered furniture at home.

When buying new furniture or other interior items, people strive to ensure that their homes and apartments are cozy, bright and comfortable, experiencing a feeling of happiness from the purchase. So that this feeling...

Do-it-yourself ottoman: step-by-step instructions from photos on how to create original ottomans

In order for a new comfortable and original piece of furniture to appear in your home, it is not at all necessary to go to the store and spend a lot of money.

Of course, it’s better to buy a sofa or bed, but such an interior detail as an ottoman is not at all difficult to make with your own hands.

In addition, if you decide to start making an ottoman, you can make it the one that best suits your design.

You can choose the desired shape, material and color. However, this is not the only advantage of homemade ottomans, since its production may cost nothing at all.

Soft poufs

The easiest way is to sew a frameless soft ottoman yourself. To make it, you only need a piece of fabric, stuffing material and a sewing machine.

Although if there is none, then it is quite possible to do without it by sewing all the parts by hand. In order for your ottoman to be smooth and look beautiful, you need to make a pattern out of paper. It should be a square with triangles at the ends.

Using this template, you need to cut out 8 identical pieces of fabric, not forgetting to leave seam allowances. Moreover, you can use either one piece of fabric or materials of different colors and textures for each of the parts cut according to the pattern.

After all the parts are ready, you need to stitch them together to form a shape similar to a ball. And in order for the ottoman to be stuffed, bend the top of the triangle of each of its parts inward.

Filler

In order for the pouf to keep its shape, padding polyester or foam rubber are well suited. But other materials can also be used. Even fabric scraps are suitable as such.

To give the ottoman a finished look, you need to close the remaining hole by sewing on a circle of material with processed edges. If it is difficult for you to process the edges of a round-shaped part, then it can be cut into an octahedron shape.

You can simplify the task and sew a pouf from two round parts, which will be the top and bottom of the product, and two rectangular parts, which will be the sides of the pouf.

The height of the ottoman can be adjusted by the width of the rectangle. But the length should always be equal to half the length of the cut circle.

By sewing rectangular parts, stitching a circle to them and filling them with filler, you can get round ottoman, which will be soft and light. It will become not only a practical piece of furniture, but also a wonderful toy for children that cannot be injured.

A cube-shaped ottoman is made in a similar way. In this case, instead of two rectangular pieces and two circles, you will need 6 squares. Making a cube out of them is not difficult. And if you sew a hidden zipper into one of the edges, you can change the filling and wash the cover.

Pouf made from plastic bottles

You can make an ottoman with your own hands and from plastic bottles. They, of course, must have the same volume.

For this top part bottles, where it begins to narrow, need to be cut off and the part remaining without a cap must be put on another similar bottle. Repeating this procedure with other bottles, we form them into a round structure.

To prevent the bottles from deforming and the pouf from losing its shape, we fasten them with tape.

note

In order to cover the upper and lower areas, you need to cut a circle out of cardboard or chipboard according to the diameter of the connected bottles. We glue foam rubber to these circles and wrap it around the outside of the pouf.

All that remains is to sew a cover for the finished ottoman. You can sew a zipper around its upper part.

Such furniture will save filler. And if the cover is made of raincoat or water-repellent fabric, then such furniture can even be placed outdoors.

In addition, as can be seen in the photo, round ottomans, made without a frame and containing plastic bottles inside, are practically no different in appearance.

Pouf with lid

In order to make a pouf similar to those sold in stores, you need carpentry skills and some tools. To begin with, you should cut out 4 rectangular pieces from chipboard, 33 cm wide and 40 cm long.

Use wooden blocks to hold them together. A square with a side of 40 cm is attached to the bottom. As a result, you should end up with a kind of box.

This blank can be sheathed with material from the inside using a construction stapler. The square, which will act as a lid, is also lined with material from below. And the top, before being covered with upholstery fabric, is covered with foam rubber in order to give the ottoman softness.

Along the entire outer perimeter, the pouf, like the lid, is wrapped with foam rubber. And only then they cover it with material. Hinges are used to attach the lid to the cube. To give this piece of furniture mobility, you can attach furniture wheels to the bottom.

The main thing is that, like poufs, they have a removable or opening lid. Then you just need to wrap the workpiece with foam rubber or other soft material and put a cover on it.

All homemade ottomans can fit perfectly not only into the interior of an apartment, but they are also a great option for a summer house or outdoor recreation. After all, ottomans are lightweight, mobile due to their size, and comfortable pieces of furniture.

They are very suitable for children's rooms, giving little ones the opportunity to sit comfortably on them, or even build castles using poufs as blocks.

It is much more convenient to use such a piece of furniture to sit at a low coffee table, because a homemade pouf can be made to any height.

Photo of a do-it-yourself ottoman

DIY ottoman: step-by-step instructions on how to make original and comfortable furniture

Pouf is a soft low stool. But the diminutive form of this word has taken root in the lexicon - ottoman. For those who decide to try making upholstered furniture themselves, an ottoman is the easiest option. In this article you will get step by step instructions how to make an ottoman.

Options

Ottomans are made in various shapes and materials for external decoration. For a small hallway, you can make an ottoman with a built-in cabinet for storing shoes; for a child’s room, a soft ottoman.

The pouf looks very respectable as part of a furniture set made of leather. Photos of various ottomans, including self made presented on this page.

Frameless ottoman

The idea of how to make an ottoman without spending a lot of money can be realized by making it from scrap materials. For example, a soft frameless ottoman made of fabric.

To make it you will need:

Thick fabric
Zipper closure
Sewing machine
Whatman paper for patterns
Padding material

First, we make a pattern for the top and bottom of the pouf. On whatman paper we draw a circle with a diameter of 35-40 cm. Do not forget about the seam allowances. Transfer to fabric and cut.

We sew the rectangular pattern first to one circle, then to the second. We sew in a zipper. Stuff it tightly and the ottoman is ready.

The sizes given in the description are not dogma, choose them to your taste. If there are no solid pieces of fabric, sew the necessary parts from various pieces of fabric. The best version of a DIY patchwork style ottoman will get a lot of likes on social networks.

Ottoman "Pear"

“Pear” is another option for a frameless pouf. It uses polystyrene as a filler. It's basically a bag with foam inside. It is very comfortable to sit on such a chair because it takes the shape of the body. Our site will tell you how to properly sew a bean bag ottoman from scrap materials with your own hands and what you need for this.

Unlike the previous version, the pear ottoman is made from two bags. They are inserted into each other, and the filler is poured. If necessary, the top cover can be removed and washed.

The filling bag is made of dense fabric, such as jacquard. The outer cover is made from a variety of fabrics - get creative with it.

For each cover you will need fabric 1.5 m wide and 2.2-2.5 m long. You will need two zippers. For an inner bag – from 40 cm, for an outer bag – 1 m.

The filler is polystyrene. This is a harmless, hypoallergenic filler. Polystyrene is sold in stores for frameless furniture.

If you make a pear ottoman according to the most budget-friendly option, then you can use packaging foam as a filler. Pieces of foam crumble into small balls, but this is a troublesome task.

Using a paper pattern, we make blank parts and sew bags. Then, fill the inner case with filler. We put on the top cover and fasten it. Ready.

Padding

Another way to make a new piece of upholstered furniture is to reupholster the old one. The choice of fabrics in stores selling furniture components is large. You will find information on how to beautifully cover an ottoman with your own hands on our website.

For reupholstery you will need the following materials and tools:

Upholstery fabric
Foam rubber - may be needed if the old one begins to collapse
Stapler, staples
Sewing machine
Scissors, knife, measuring tape

We disassemble the old ottoman and remove the staples securing the fabric. We carefully rip out the old upholstery, it will serve as a template for the pattern of the new one. In addition, according to old upholstery can be calculated required amount new fabric. We evaluate the condition of the foam rubber.

Replacing foam rubber

If the old foam rubber begins to deteriorate, it is easy to replace. To do this, you need foam rubber of appropriate thickness. Better fit foam rubber with a density of 25-30 kg/m3.

Draw the outline of the ottoman seat on the foam rubber and cut it out sharp knife. In furniture production, foam rubber is glued with specialized glue. At home, you can use any glue that does not contain toluene.

Ottoman with lid

A pouffe with a lid is very convenient for storing things. To make it yourself you will need simple tools, available in the arsenal of any home craftsman: jigsaw, drill, stapler. You can find diagrams and drawings on how to make an ottoman with a lid on our website.

Conclusion

Making a soft ottoman at home is very simple. This does not require production capacity or expensive equipment. And the master classes on our site will help you with this.

Photos of do-it-yourself ottomans

DIY ottoman: how to make an original interior element at home

Everyone from time to time has the feeling that the interior of their room is outdated or simply boring. In both cases, a new piece of furniture works well and quickly refreshes the look. For this, something small is best suited, for example, a homemade ottoman.

The thing is not complicated, and in some places the process can turn out to be very interesting and entertaining. Ottomans have many areas of application, and therefore they can come in handy very often in the home.

It can be used as an item to eat on, place your feet on, or place some things on. Depending on the design, objects can also be placed inside the ottoman. But I'm getting ahead of myself a little.

Why with your own hands?

If you are planning, but are still in doubt, to make an ottoman yourself, fearing the complexity of the process, calm down, there is nothing complicated about it. Moreover, there are a number of advantages to this approach.

First of all, this is because you are not limited to what the market offers you, but start from your own desires. There are a huge number of original ideas for DIY ottomans that are available in free access in the Internet. I’m not even talking about thematic magazines, which often contain detailed creation instructions.

Design

To create this interesting piece of furniture you do not need any special skills or abilities. This can be done by either a man or a woman, an adult or a teenager, and what’s more, even a primary school child can do it.

It's more about desire and desire. With a little searching online, you can see models made from a variety of materials, such as baskets, tires, and even bottles.

For example, it is very easy to make a pouf from a small box. As a result, you can get an ottoman with a drawer and a lid, while putting in less effort than it would take to create a stool.

All you need to do is a cover, which it is advisable to attach the fastening mechanism. From now on it will only be a matter of external finishing pouf.

Don’t forget that this can also be a basket, to which you just need to add a frame for strength, and then cover it all behind fabric or other decorative material.

To do this, you just need to pick up the right bag and go to the construction supermarket, where you need to buy polystyrene foam. Essentially that's all you need to do. It really is as simple as it seems at first glance.

This is exactly what I meant when I said that even a child can make a pouf. In any case, patience is required, but at the end you can get an item that can be useful for a long time.

Example Workflow

It was not for nothing that I previously spoke about ottomans made from bottles. It sounds strange, but we will look at fairly detailed instructions for making this type of ottoman. There is nothing complicated, but the result may pleasantly surprise you.

I will tell you based on personal experience. It wasn't that long ago, so I remember it quite clearly. My nephew's parents were away on business, and I volunteered to take him over for the weekend. He is six years old, he is already quite old, and we decided to do something together.

I didn’t consider watching TV, because I wanted to spend time interesting and active. The IKEA catalog, which accidentally ended up in the hands of a nephew, came to the rescue.

There he found small stools and poufs, and said that he would like one for himself, but his parents do not want to buy one yet. After some searching online, I discovered that you can make an ottoman from simple plastic bottles.

We liked the idea, and we took on the materials.

To tell the truth, I was pleasantly surprised to learn what you can use to make an ottoman with your own hands in modern world. Bottles weren’t a problem – I had a dozen more from mineral water in my garage plastic containers, so this was not a problem. I can only say that you should take bottles of the same height and the same volume.

Now we have a frame, but no foundation. You could have used plain high-density cardboard, but I decided it would be better to use sheets of plywood. A little denser, a little more reliable, in short, a good option. In addition, you need quite a lot of foam. It depends more on whether you want the pouf to be soft or not very soft.

The furniture was made for a child, so we decided not to skimp on this. For plywood and foam rubber, we went to a construction supermarket, after which we stopped at a fabric store, where we selected the fabric we liked for the exterior upholstery.

By cutting 2 sheets of plywood into a circle shape, we got our bases. We also glued them with tape to the existing structure. Next we took foam rubber and glued it around and on top of the structure with glue.

Next I had to work a little with a needle and sew a cover for the pouf. As you can see, nothing complicated had to be done, but at the end we got a beautiful, light and interesting ottoman, which still pleases the owner.

Photos of do-it-yourself ottomans

The best ideas for making an ottoman for your home with your own hands

Poufs are not only a beautiful decorative element, but also have wide functionality. They are used as a footstool, soft seat, pillow for your favorite animal, for storing things, etc.

And if it would be better to buy an armchair or sofa in a furniture showroom, then you can make an ottoman with your own hands, using various improvised means. Today you can find quite a lot of ideas for making poufs yourself on the Internet.

note

And what kind of materials are not used in this case, you read and simply wonder how you could have thought of this! But once you try to bring one of them to life, you immediately ask yourself: why didn’t I know this before?

Soft ottoman in the shape of a cylinder

First of all, we present to your attention a master class on how to make a cylindrical ottoman with your own hands. A pouf of this classic shape can be placed in the hallway, living room or bedroom.

To produce it we will need:

chipboard sheet with a thickness of at least 16 mm;
wooden blocks 30x20 mm – 8 pcs.;
furniture stapler;
self-tapping screws;
screwdriver;
sheets of foam rubber and padding polyester;
glue for foam rubber;
furniture fabric (tapestry, velor, capiton, etc.);
legs or rollers.

Having decided on the required size of the future pouf, cut out two circles from sheet chipboard and one of the same from foam rubber.

We cut out chipboard circles of the required sizes and timber parts

Connect the beams and circles, securing them tightly with screws - the frame for the pouf is ready.

We connect the circles and timber with self-tapping screws into a frame

Then you should cut a rectangle from a sheet of chipboard with a width equal to the height of the frame and fasten it around the perimeter, making a wall.

We fix the chipboard sheet around the perimeter. Fully fixed wall

A circle of foam rubber is glued to the seat, and padding polyester is placed around the structure.

Fastening foam rubber and padding polyester

A cover is sewn from the selected upholstery fabric according to a pattern similar to the one we used to make blanks for the frame.

The finished cover - the upholstery is placed on a wooden structure and, using a stapler or nails, is fixed at the base of the pouf.

We put on the cover and secure it at the bottom with a stapler or nails

All that remains is to attach the legs and the homemade pouf is ready!

By following our step-by-step instructions, you can easily sew a comfortable, original pouf with your own hands. In the same way, a square pouf is made, photo and video examples of which can be found in huge quantities on the RuNet.

Fashionable and modern: pear ottoman

Next we will talk about how to sew a bag ottoman with your own hands - a very fashionable piece of furniture in modern interior decor. You might think, isn’t it easier to buy such a corner ottoman in a store? Of course it’s easier, but much more expensive! And it is for those who value their money and have at least a little knowledge of the field of cutting and sewing that this step-by-step instruction is dedicated.

To make a soft pear ottoman you will need:

dense upholstery fabric – 320x150 mm;
fabric for the inner cover – 300x150 mm;
polystyrene foam filler with the addition of holofiber - 0.5-1 cubic meters. meter.;
pattern paper;
dense threads;
zipper – 60 cm.

The inner cover of the pouf should be made of smooth, sliding, synthetic fabric. Thanks to this choice, the filler will move freely throughout the bag, taking the shape of the person sitting in it.

Sewing the product

The pouf pattern consists of six wedges of the bag itself and one lower part for its base.

First, you need to make drawings of the required parts on paper, and then transfer them to fabric for the inside and outside of the pouf.

The parts of the bag for upholstery should be slightly larger than those intended for the filling - this will make it much easier for you to put the outer cover on the bag with filling.

The second stage of work will be sewing together all the fabric elements of the bag. First, sew the wedges together, and then proceed to the base.

Don't forget to leave room for a zipper on the outer cover - the zipper will make it easier to care for the chair with the bag and will allow you to update the cover at any time.

When both bags are ready, fill the inner bag with 2/3 of its volume and carefully sew the remaining areas. Place a decorative cover on top and fasten the zipper. The ottoman is ready!

A practical piece of furniture – a pouffe with a storage box

We bring to your attention a brief description of how to make an ottoman with your own hands, which will combine several practical functions:

a transformable pouf with one movement of the hand can turn from a soft seat into a storage place for many different items;
an ottoman with a drawer is perfect for dressing tables, because you can not only sit comfortably on it, but also put a lot of hairdressing accessories inside, such as straightening irons, curlers, hair stylers and other items;
You can not only sit on a homemade ottoman while undressing in the hallway, but also use it at the same time as a cabinet for shoes or for storing shoe care products.

Materials for work:

chipboard sheet;
wooden beam with a section of 4x4 cm;
wood glue;
screws;
hacksaw;
construction stapler for furniture;
screwdriver or screwdriver;
foam;
padding polyester;
fabric for upholstery (velor, eco-leather, suede, capitonne, etc.);
butt hinges;
furniture casters.

Stages of work

It is necessary to cut blanks of the following sizes from a sheet of chipboard:

37x40 cm – 2 pcs;
37x37 cm – 2 pcs;
40x40 cm – 2 pcs.

Small block stoppers for the ottoman lid

The box is covered with padding polyester and then covered with upholstery fabric using a furniture stapler. For mobility of the product, rollers can be attached to its bottom side.

This way the pillow will be soft, but at the same time keep its shape.

With this, your DIY wooden ottoman is ready!

New life for old furniture - a pouf from a stool

Next, we will talk about how to make an ottoman from a stool yourself. If you have an old stool at home that has lost its presentable appearance, but is still strong, do not write it off. Using a little fabric and foam rubber, you can transform it with your own hands from scrap materials into a magnificent, soft and comfortable pouf.

So, how we make an ottoman from an old stool:

We cut out a piece of upholstery fabric measuring 120 cm by 34 cm for the side and a circle with a diameter of 48 cm for the pillow. To make the seat soft, cut out a circle of foam rubber and glue it to the top of the chair.

We sew a cover from fabric blanks: first you need to sew a stitch along the edge of the circle and pull it lightly. Next, you need to sew the circle to the long side of the rectangular cut, and decorate the seams with decorative cord or ribbon. Sew adhesive tape along the open edge; the bottom edge must be hemmed.

Make 4 pockets from pieces of fabric and sew them to the cover at an even distance from each other. Pockets can be decorated to taste with different decorative elements.

We put the finished cover, which took no more than an hour to make, on the stool.

Today we told you about how to make an ottoman with your own hands step by step in several options - a pouf from stools, a pouf made from chipboard and soft filling.

You are given the opportunity to choose the most optimal and acceptable option for yourself, which will depend on your abilities, financial capabilities, as well as the design style of your rooms.

In any case, such an original detail in the interior will not go unnoticed and will not only decorate the house for many years, but also make your holiday and life more comfortable.

How to make an ottoman with your own hands: 6 master classes

You can even make an ottoman for your home yourself using different materials and techniques: crocheted or knitted, sewn from improvised materials or even from an old sweater.

Our review presents interesting master classes how to make an ottoman for a hall or hallway and non-standard ideas use of the product in the interior. So, let's find out how to create a stylish piece of furniture step by step and what you need for this.

Ottoman filler

There are many fillers for making frameless furniture. Each material has its own characteristics and features.

If synthetic materials are not suitable, you should choose natural ones:

Wood sawdust and shavings from waste cedar and pine. The raw material repels pests and has a healing effect, but it needs to be changed periodically.

Pooh presents yourself light filler.

Buckwheat husk is popular. This filling allows you to create comfortable furniture.

To the benefits Natural fillers include the absence of harmful chemical components.

Synthetic materials are also used as fillers:

Expanded polystyrene looks like small balls. Elastic granules allow you to create additional volume.

Holofiber is a lightweight filler. It allows you to get upholstered furniture.

Polyurethane foam is an elastic material that does not provoke allergies.

ADVICE: You can also use an old blanket, pillow or rag as a filler.

Products filled with balls can be used outdoors, because the material does not absorb moisture. For creation items furniture improvised means are also used. Original materials include cereals, legumes, dry grass and cotton wool. There are a large number of options for furniture fillers

Knitted square ottoman

Let's find out how to make a knitted ottoman with your own hands. Furniture made from handmade yarn – original solution for the interior and a soft object for a comfortable pastime. The stylish item looks like a sample from a store.

To make a soft ottoman with your own hands, you need to knit six squares of wool of the same size. Knitting is done by crochet. The “sampler” texture and bobble screeds are used. You can watch the knitting method in the video.

ADVICE: Such a pouf is suitable as an addition to an ottoman, as well as as an item for decorating bedrooms and living rooms.

Lyon brand yarn, 450 grams, gray– 5 skeins;
needles for creating tapestries;
crochet hook, size 6.5 mm;
pouffe filling;
special fibers and foam;
plastic bags.

Step-by-step instruction:

Connect the squares using seams. To do this you will need a double thick thread.

You can check the shape of the product on the box.

Filling a piece of furniture.

To strengthen the product, it is worth using materials such as plastic bags, foam or newspaper.

ADVICE: To prevent the filling from penetrating through the knitted pattern, it is recommended to place a pillowcase or soft lining inside.

Once filled, connect the two remaining sides. The yarn product is ready for use.

Master class from an old sweater

Let's figure out how to make an ottoman with your own hands from an old sweater. The lower part of the clothing can be used to decorate the upper surface of the product. Even when cutting off the sleeves, unsightly seams will not appear.

Assembly technology:

Turn the sweater inside out and cut a circle at the collar.

Sew up the arm holes with strong threads.

Then turn the product inside out.

The bottom should be slightly rounded.

Place a special polyester lining inside the sweater. Then cut out two circles and connect these elements.

The product must be filled with soft filler.

TOTAL: After stuffing the pouf, you should sew up the hole. The decorative product has many uses for the home. This perfect solution for home interior decoration.

Crochet an ottoman

You can knit a round pouf with your own hands. To knit a product with a diameter of 50 cm you will need 2-3 balls of Bobbin yarn. A detailed description is presented in the photo below.

But the knitting technology is as follows:

First a basket or bag is knitted
Filled with filler
And then the “lid” is knitted separately and sewn to the base of the ottoman

How to sew an ottoman bag with your own hands: photos and ideas

You can make an interesting product for your child. A DIY ottoman bag is perfect for creating a cozy place to spend your leisure time.

A soft piece of furniture can be made from two pieces of fabric, bean pellet filling and a zipper. Like option Not suitable for small children, as filler granules may fall out of the unzipped zipper. There is a danger of the child choking. If necessary, the zipper can be sewn up.

IDEA the fact is that we sew like a bag - BUT we sew the OPPOSITE corners and get the design as in the photo

Master class: how to sew a fabric ottoman

Universal products can be made from fabric. This provides additional seating and leg rest space. In this master class you will learn how to make a round ottoman with your own hands.

For manufacturing you will need the following components:

1.25 meters of thick woolen fabric;
lightning;
scissors;
measuring tape;
sewing pins;
a piece of leather;
filler;
sewing machine.

The process of creating ottomans

Cut out a circle (46 cm), a rectangle (length 142 cm, width 40) and a square (side 48 cm).

Cut the square into two parts.

Sew a zipper to both sides. The zipper should connect the two halves.

Then cut out a circle from the square using a ready-made template.

Fold the rectangle in half along the short side.

After that this part need to be sewn to one circle and then to another.

From a strip of leather can you make a handle.

Additionally, buttons are attached to the leather strap.

You can use polystyrene beans as a filler. Foam or polyester is also used. It is recommended to sew the zipper together before use.

This DIY round ottoman is ready to use.

Ottoman-banquette in the hallway for shoes

To create an ottoman for the hallway with your own hands, you will need two drawers and some other materials. Such a product is not only practical, but also functional. You can install shelves inside and put shoes or things there.

You will need the following components:

two wooden boxes;
batting and foam for drapery;
fasteners;
sheet and burlap;
special paint;
wood plank;
wood glue;
tools;
brush;
stapler

To make an ottoman in the hallway with your own hands, you need to follow these steps:

The boxes are glued along the long side.

A bar is attached to the bottom where the rollers can be attached.

Then foam and batting are fixed to the top surface.

The burlap is sewn together with the sheet. The sheet acts as a lining.

The box is covered special paint. If desired, you can apply an aging effect.

The cover fits over the drawers.

You can make other ottomans from boxes with your own hands. The photo shows original options. One option involves opening the drawers, inside which you can place shelves for shoes. And it is attached on top soft pillow with filler.

A practical option can be made from one box. First, the box needs to be sanded and painted with spray paint. Filler is laid on the plywood, and fabric is laid on top.
The material is fixed on the reverse side with a stapler. Z
The plywood is then attached to the surface of the box. You can attach rollers at the bottom.

How to make an ottoman from a stool

When deciding which ottoman you can make with your own hands from available materials, you should try the option from an old chair. For creative manipulations you will need an old stool.

Let's start assembling:

Disassemble the chair and remove the seat.

Cut out the blanks. Circle in plywood and foam.

Use glue to attach the foam to the board.

Put a fur cover on top and secure the ends with a stapler.

Assemble the chair.

It is necessary to let the chair stand for at least a day for the glue to harden. The fur needs to be combed.

A detailed master class on how to update a chair in this article.

Ideas for ottomans using improvised materials

Let's consider options for ottomans with original design. Common objects, bottles, tires and rags serve as filler and frame.

Bottles

Unusual creation option DIY ottoman made from plastic bottles. The bottles need to be held together in a round shape and secured with tape. The bottom and top of the product are made from cardboard.

The bases are made from foam. They are fixed with tape. The cover is made from beautiful fabric. You can see the design made from bottles at photo. A similar item is suitable for decorating a living room.

Tires

Interesting models can be made from tires. How to make an ottoman depends on the availability of available materials and skill. The tires need to be fastened together. A material similar to foam rubber is placed inside. The holes are then covered with thin boards. A soft base is mounted on top and a cover is put on. To decorate the structure you need to use dense fabrics.

Ottomans for children

To make an ottoman with your own hands, you can use drawings and diagrams. Bright and colorful fabrics are used to make products. Try these options:

The model, made of two pieces of material, looks interesting. different color. Plain fabric can be used at the bottom.

A wonderful solution is square-shaped structures.

An original composition can be achieved by using fabrics of different colors.

Children will love the cone-shaped ottoman.

You can even sleep on a long ottoman. To make it you will need flat pillows and a long blanket. The pillows are placed in a fabric cover and secured in place.

Ottoman in the interior with different designs

The choice of ottoman option largely depends on the type of room. For the hallway, you should choose frame models with a rigid base. Cylindrical designs help smooth out the angularity of the room. For comfortable rest In the living room, models with soft upholstery are suitable. To create an accent, you should choose a product made from a material with a bright color palette.

Round poufs are ideal for small space. Rectangular ones are recommended to be placed near armchairs and sofas. The product for the kitchen must be made of moisture-resistant fabrics. For a child's room, you need to choose safe, comfortable and soft models.

We hope that our master classes will help you figure out in detail how to make an ottoman from simple materials. Homemade products will add comfort and coziness to any room. Original seats are suitable for different interiors.