Do-it-yourself homemade products for your garden and garden not only perfectly complement your garden plot, but will also help you save a decent amount of money. Today there are many useful devices for the garden, simplifying daily life. Usually, a large number of unnecessary things and materials that people do not use in their apartments are collected at the dacha. it takes up a lot of space. Any summer resident has the opportunity, using his imagination, to make simple homemade items.
Garden tools
When visiting hardware stores, many buyers note that the quality of garden tools does not correspond to their cost. Even an expensive and high-quality shovel is very easy to damage. One option is to personally make some kind of country tool that can perfectly replace a regular bayonet shovel. for example, a garden digger, which is not only very easy to make, but also easy to use. If we compare an ordinary shovel and this country tool, it can be noted that it is much easier for the second to dig the ground, and it does not place heavy loads on the human spine.
To make a digger for the garden with your own hands, you need those items that often lie and gather dust in the country. Must have:
- metal sheet 2 mm thick;
- metal pipe 0.5 inches in diameter;
- 2 bolts and 2 nuts;
- 2 engraver washers for the bolts and 2 hours of free time.
You need to cut the metal sheet into 7 pieces, similar to stakes. That is, you should get a stake that is wide on one side and tapering to the other. Then, take a pipe 43 cm long and measure 5 mm from the edge. The following marks are made every 6 cm. Another 5 mm should remain on the other edge of the pipe, which should also be marked. Using a grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.
The cut stakes are taken (they will act as legs), inserted into the grooves cut in the pipe and secured by welding. Then the remaining pipes are welded into a handle U-shaped and bolted to the workpiece. That's all, the digger is ready to use.
Garden decoration
We should not forget about the opportunity to become a designer of our own garden in the country. After all, you can make not only garden tools, but also much more. And to add some zest to your country house, you can lay out a beautiful and original garden path made of stone. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:
- stone used to lay out the path;
- sand;
- gravel and board 25-30 mm thick.
Work should begin with a preliminary measurement of the distance of the future path. To do this, four pegs are driven in and connected in pairs with a guide rope. Afterwards, you need to remove upper layer soil, or in other words, dig a trench. When working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will not only help to use building materials correctly and economically, but will also simplify subsequent work. You need to install boards along the edges of the trench; they will act as sides into which sand and stones are placed.
First of all, gravel should be poured into the bottom of the hole. It will not only perform a shock-absorbing function, but will also provide indispensable assistance with drainage groundwater. Next, the gravel is covered with sand, which should be moistened in advance - this way it will lie more tightly. It is best to make a sand cushion with a thickness of 10 cm, and then you need to level the surface of the embankment with a board. Only after this can stone or paving stones be laid. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone again.
Mosquito traps
The invention fights not mosquitoes, but their larvae. It is suspended from tree branches. Mosquitoes lay their offspring in this device, which prevents the newly born mosquitoes from leaving it. For more effective fight with bloodsuckers you should make as many of these traps as possible. But even the use of this gadget cannot provide 100% protection from mosquito bites.
One of the most simple ways- is to use regular plastic bottle as a trap. Needs to be cut top part with a neck and insert it into the lower part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this you will need 15 g of yeast, 45 g of sugar and warm water. All 3 components need to be mixed and the resulting solution poured into the trap. Then, the bottle must be darkened. To do this, you can use a dark cloth or thick paper. This trap can attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in residential premises.
These were just 3 of the most interesting and easily made devices for the garden and garden. Do not forget that a person can create something more useful and unique from available materials, you just need to give freedom to your imagination.
Interesting homemade products for the dacha are waiting for you in this article. You will learn how to make a lawn mower from an old washing machine, make a sink, country shower, dryer made from scrap materials.
Useful homemade products for the garden - do-it-yourself washing
Not everyone has the financial opportunity to buy a Karcher car. If you can't buy it, then why not invent it? A homemade car wash will allow you to do without running water, reduce water consumption and thoroughly wash your car, fence, garden path or other objects.
Here's what you'll need for this homemade garden project:
- plastic canister with a capacity of 5–20 l;
- hose connector kit;
- automobile nipple;
- a piece of hose;
- silicone sealant;
- sharp knife;
- compressor or car pump;
- watering gun.
Take a set of hose attachments, which includes 2 connectors, a 3/4 threaded fitting, and a 1/2 adapter.
Here is the principle of operation of such a homemade product for the dacha: you connect the gun to a hose, attach this device to the bottom of the canister. A nipple will be built into its neck.
Fill the container with water, but not to the top. Then screw on the lid and pump air inside. Pressure will be created here, and the water will flow well when you pull the trigger of the gun. Here's how to assemble such a mini-wash.
Using the tip of a knife, carefully cut a hole in the lid. It should be slightly smaller than the diameter of the nipple leg. Also cut a circle required diameter at the bottom of the side of the canister.
Insert the nipple into the cover.
Now, helping yourself with the wire, place the coupling in the hole intended for it. Apply silicone sealant to secure the connection between the coupling and the canister.
It is necessary to tighten the lid and carry out other work only after the sealant has completely hardened. Then you will connect one end of the hose to the water gun and the other to the canister.
Pour water into the container, but not to the top, so that there is room for pumping air. But do not pump too much, so that the canister does not deform or burst under pressure. Look at how the fitting should be tightened and the connectors installed.
If everything is done correctly, then when you press the trigger of the water pistol, the water will shoot out in a good stream. You can adjust the pressure by twisting the tip of the gun.
At the dacha you can hardly do without a shower. Try to make something unusual rather than tropical, then you will be able to enjoy water treatments even more.
How to make a rain shower from scrap materials for your summer house?
If you have just recently purchased a plot of land and do not yet have a washing room, then you can take a shower right on the street, enclosing a small area near the fence with a curtain. To make such a rain shower, you will need very few components, these are:
- bracket;
- wire;
- flexible hose;
- metal beer can;
- hose adapter;
- awl;
- nails.
Tie the top of the hose with wire to the bracket, and attach the other end to the water supply or pump. When you lower the pump into a barrel of heated water, you will be able to take pleasant water treatments.
You can also make a rain shower head using a disc container as it. In its center you need to fix a plastic adapter that is attached to the shower hose, and the central axis of the discs needs to be removed. Using an awl, make holes at the top of the lid. Seal all fasteners well with sealant. This nozzle is held on a bracket using a thick wire or on a rigid pipe.
If you want to make a rain shower, then you can use plastic pipes for this.
You need to supply water to them, first make many small holes with a soldering iron, and then enjoy the flowing drops. Children really like these water procedures.
But do not forget to first check the water in the container from which it will be poured into the shower; it must warm up in the sun.
And to make a stationary shower, you need to first pour water into a tank or barrel, which will be located under the roof or on the roof of the building. On a warm summer day, the water here warms up well, and you can wash yourself to your heart's content. To be able to do this in cooler weather, then you need to provide a heating system in such containers.
DIY country shower
Before installing it, you need to make a shower stall. If possible, you can make it out of wood, installing this small structure on the base. Put wooden door or limit yourself to a shower curtain like this.
There are more simple options. If you have oilskin fabric, then use it.
Another option is to purchase impregnated fabric or use an old awning or tent.
If you made a fence from corrugated sheets and you have some materials left, then try making a shower for your dacha out of them. Metal pipes you need to dig in according to the markings and fill them with concrete. When it dries, cut sheets of corrugated sheets are welded to the racks. One of them will become the roof.
If you don't have enough wooden planks, then implement the option shown in the next photo on the right. And on the left is a shower that is made like a fence. So the materials for it will cost almost free.
When the shower is ready, you can install a water container on it. To make it warm up better, you can make a kind of coil out of metal or a hose. Then the water will warm up more actively.
These and other homemade products for the garden allow you to make the most of your existing containers.
To be able to get warm water even when it is not heated by the sun, use electric heating. To do this, you can place the plastic barrel vertically or horizontally. Then it will be necessary to install a shadow on one side, and on the other? water fill fitting. Make an overflow hole so that excess liquid flows out and you can see that the container is already full.
Now all that remains is to install the tank. This is usually done using a shower roof. You can put a flat tank here, made of iron or plastic. You can also make a canister for the soul from metal or iron barrel. If you need to heat water, then a heating element is installed in the barrel.
Check out other examples of what you can do with personal plot with your own hands.
Interesting DIY crafts for your garden
Gardening tools are very necessary for working on the ground. Often, the store sells not very high-quality sets. After a short period of use, the handle of the shovel breaks off, or the teeth of the hoe become bent. Therefore, if possible, try to make your own tools.
Take:
- stalk;
- fragment of a water pipe;
- scrap from a two-handed saw;
- screws;
- screws;
- fragment profile pipe cross section 3 cm.
To make the blade, take a scrap of a two-handed saw and draw the outline of the future hoe. Punch two holes.
At the same distance and the same diameter, you need to make 2 holes on the chopper itself, and then cut out a fragment from a two-handed saw.
Drill these holes using a drill and a bit designed for metal work. Connect these two parts using rivets, which are screws.
Now drill a hole in the top of the hoe so you can attach the handle here.
Make also a scoop, which is very interesting to work in the beds. Then such homemade products for the garden will allow you to acquire a very durable set of tools.
Saw off the required piece of the cutting with a grinder and begin to straighten part of it with a chisel.
Then, using lever tools to help yourself, straighten this part almost completely.
All that remains is to work with the hammer so that the blade of the scoop takes on the desired shape. Using a felt-tip pen, draw the outline of its working part and cut it out with a grinder.
Using an abrasive wheel, clean the edges of the shovel and make them smoother. Now sand the tool with a flap wheel. This is how shiny this shovel will be.
Also drill a hole in it for the handle, then insert it and secure it with a screw.
Cover the handles of both instruments with an antiseptic and then with varnish. Now you can use the tools for their intended purpose. If you want, use the same principle to make a ripper for beds.
It’s very exciting to create things like this for your garden with your own hands. Maybe after you've made the tools, you'll want to make a device that you can use to dry the part harvested. See how one gardener did it.
How to make a dryer for fruits and vegetables?
Look at what materials you need to take for this:
- sheet metal;
- square pipes;
- locking mechanism;
- polycarbonate sheet;
- self-tapping screws;
- 2 door hinges.
- grinder;
- welding machine;
- drill;
- stationery knife;
- tape measure and marker;
- metal scissors;
- with a hacksaw.
The door here will be metal. To make it, cut 4 fragments from an iron pipe and weld them into a rectangle. Then you need to sheathe this base with metal using screws with nuts and self-tapping screws. If possible, weld a steel sheet. To make a mount for baking sheets, attach wooden blocks to the back of the frame. Take self-tapping screws for this. In this case, on each side there are 4 wooden blocks for 4 baking trays.
An absorber is installed in the dryer. Take some sheet metal and paint it black. Use heat-resistant paint. When it is dry, place this blank on the bottom of the dryer.
For the absorber, take a thick aluminum or copper sheet, or, in extreme cases, steel. These materials conduct heat well.
Now you need to sheathe the outside of the dryer, make the roof transparent, made of polycarbonate. Then the sun's rays will penetrate well here. Glass can also be used. Close the ventilation windows mosquito net so that insects do not fly here.
Attach hinges and a locking mechanism to the door. Secure the door in place. Look what a wonderful, beautiful and spacious dryer it turned out to be.
All that remains is to make the baking sheets. They must allow air to pass through. First, knock together the frames from the bars, and then attach the metal mesh to them.
Now you can cut fruit and watch how your device will work. Place a thermometer in the dryer to monitor the temperature. It should be between 50–55°C. At lower temperatures, cover the bottom holes by placing a rag here.
In such a homemade dryer you can dry not only fruits, but also vegetables, herbs, fish, meat, and roots.
If this design diagram for such a device seems complicated to you, then you can make a dryer from a metal barrel. A hole for the door is cut out in it, and metal mesh racks are inserted inside.
To prevent water from flowing in here and for better ventilation, a roof like this is installed on top.
You can upgrade this fixture by installing a fan and an electric heater inside.
If you want to make your own lawn mower, then this is also possible.
Turn an old washing machine into it, for example, like this one.
And if you still have an old bedside table, then you can turn it into a platform for a future almost self-propelled device. But you only need the door from the bedside table.
Drill holes in the center of the motor shaft. Make a cutting knife from an old two-handed saw. It is necessary to saw off it to the size of the desired shape, cut out a recess inside.
Attach two wooden pickets that will become the handles of the mower. Don't forget to secure the motor and extension cord to it. Now you can test such an interesting unit.
If you are interested in other homemade products for the garden, then you will find it useful to watch the following video.
Many interesting ideas await you in the first video.
And with cool homemade products from plastic pipes you can get acquainted if you watch the second story.
A summer cottage is not only about tedious weeding of beds, planting vegetables, fruit trees, greens and berries, daily watering of plants, harvesting and conservation. This is rest, relaxation and a pleasant time in nature, in the fresh air.
Unlike urban apartment dwellers, those who have Vacation home and a summer cottage, have more possibilities create a special atmosphere and decorate your property in an original way.
Despite the fact that everything country crafts You can buy them in stores; you can get more pleasure by making them yourself from improvised means and inexpensive materials.
About how to makewith your own hands useful homemade products , we will tell you in this article.
Which crafts for the gardenobtained from old furniture and fittings
There can never be too much furniture in a country house or in a private home! It is used not only in the house, but also on the veranda, on the terrace, on the plot, in the vegetable garden or in the garden. Only for this it needs to be restored - painted and a protective coating applied so thathomemade products for the gardendid not deteriorate for a long time due to exposure to weather.
From an old wooden crib, painted White color, you will get a large box for flowers.
A chest of drawers with pull-out cabinets will be useful in the kitchen, bedroom or on the veranda of a country house.
If your mother or grandmother has an ownerless chest stored in the cellar, be sure to take it out and polish it. Such crafts at the dacha are valued not only because original look“antique”, but also because of functionality. Grandma's chest will become a chic coffee table with a niche for many useful things.
Are you going to throw away a shoe rack that doesn’t fit into the interior of your apartment after renovation? Do not hurry! These shelves can be used to store fruits and vegetables in the cellar, basement or directly in the country house.
Over time, every family collects a lot of accessories. If you nail unnecessary door handles onto an old board (no need to paint or sand it), you will get a chic hanger for jewelry that will look great in the interior of a private home or cottage.
Photos of country homemade products, do it yourselfmade from kitchen utensils
Every housewife wants to be surrounded by not only beautiful, but also functional objects. It often happens that comfortable wooden spatulas, which were purchased as a set, oven mitts and a hot mitt, look unaesthetic. Don't rush to part with them. They can be given a second life and taken to the dacha, and an old rake nailed to a board can be used as a hanger.
What crafts at the dacha can be created from car tires?
Car tires and tires - excellent material Forcountry homemade products.Coloring in bright colors, they are used for arranging flower beds and flower beds.
Trees and ornamental plants are planted in large tires.
Country house chair made from car tires: master class
A little imagination, desire and bright paint - and old tire will turn into any thing. Several tires are used to make garden chairs, tables, figures of animals and birds, and swings for children.
If you have boards and gas blocks left after construction, make them a bench and a rack with drawers.
Manufacturing of such crafts at the dacha won't take much time. They will turn out to be stylish, functional and will fit perfectly into the interior.
Don't forget: if you havesummer cottage, for DIY crafts everything will be useful:
- broken flower pots,
- non-closing umbrellas,
- old banks,
- etc.
The main thing is to know where and how to apply them!
Photos of garden crafts for inspiration
Landscaping your dacha will not be a problem or an expensive investment if you show a little ingenuity. It’s not difficult to create homemade products with your own hands – you will need time, simple tools and equipment. You can use leftovers building materials, unnecessary boards, car tires, felled trees.
What materials are used
Any summer resident will not refuse the stylish decor of the site. Many companies offer original things. However, handmade crafts will help add originality to the site.
Materials most often used in work:
When decorating a dacha, there is no need to restrain your imagination - bold combinations of materials and non-standard use of unnecessary things are encouraged.
It is not necessary to follow proportions or natural color combinations. The giraffe may have purple spots, and the train may be small in size.
Original decor for the recreation area
Many city residents buy suburban areas for a relaxing holiday. It's nice to take a break from everyday life on the weekend and feel connected to nature. The design of a relaxation corner deserves attention; it is advisable to fence it off from the agricultural work area. A fashionable solution is to build small gazebos from leftover boards. You will also need pillars and beams for supports and cross beams.
Sequence of work:
- In the corners of the site, holes are dug 50-60 cm deep, into which beams are inserted and fixed with mortar.
- The support beams are secured to the upper ends of the beams using self-tapping screws.
- Cross boards are secured to support beams. On the uneven bars, the boards are fixed in horizontal view, leaving gaps 5-7 cm wide.
A neat trimmed lawn or a platform paved with stone – any options are suitable for decorating the site. To revive the structure, flowerpots with flowers are installed near the site or planted nearby climbing plants.
How to beautifully design flower beds
Fragrant flower beds are the best decor for a relaxation area.
It’s easy to make a non-standard flowerbed fencing using available materials:
- If there is a small amount of brick left, you can lay out any flower bed in several rows. geometric shape. The solution will help secure the structure and give it strength. Flower beds made of natural stone also look natural.
- Car tires have long been a popular material in dachas. To give the flower garden a well-groomed appearance, it is advisable to paint the tires with bright paint and lay them out in several layers, forming flowerpots, or lay them out around the area in a curved form, forming circles and ovals.
Give non-standard look an old bicycle will be helped by a couple of plastic or wooden flowerpots. The transformation is done quickly: the bicycle is painted with bright paint, flowerpots are fixed above the front and rear wheels. Climbing plants, whose branches will skillfully camouflage the metal structures, will give the structure a picturesque appearance.
An old bathtub won't look like trash at all if you transform it in a non-standard way. Of course, the simplest option is to use a colorfully painted container as a reservoir.
However, meticulous and not lazy summer residents will transform the bathtub into cozy furniture for relaxation. For a wonderful transformation, you need to cut out part of the side wall with a grinder and carefully sand the sections. Comfortable sofas are ennobled: painted in the desired shade, decorated with soft mattresses and headrests.
An impromptu flower bed in the form of a garden watering can, installed next to the sofa, will create a real relaxation area.
Stylish design of garden paths
Rusted metal tanks or old wooden barrels can be turned into original flower beds or even original beds that will successfully complement garden paths.
Stages of work:
Barrels, tubs, thick logs can be called the most pleasant material for work. It’s great that objects can be placed not only vertically, but also horizontally, sawed in half or built into multi-tiered structures.
The products do not require special decoration - the colorful wooden texture will serve as the best decoration.
DIY figurative compositions
It is quite understandable that every summer resident wants to give the site a unique look. In order not to spend money on the services of designers, you can create fun crafts with your own hands from scrap materials. Unnecessary garden tools, broken metal products, household containers, cobblestones and stones different sizes- everything comes into play.
How to make metal decor
Unique figures assembled from old shovels and broken rakes and hoes will become creative decorations for paths and lawns. It’s not difficult to create expressive images – the main thing is not to limit your imagination. To assemble a snail figurine you will need literally a narrow sheet of metal and a can of canned food. Black paint will give the figure laconic look and will make it very noticeable against the background of a green lawn.
The original solution is to combine different materials when creating figures. The union of stone and metal looks elegant and natural. The cat, assembled from rounded cobblestones of different sizes and metal elements. The stone pet is placed comfortably on a large stone to bask in the sun.
Flowers collected from metal tablespoons will become a brilliant decoration of the flower bed. An impromptu flower garden will delight summer residents at any time of the year - rainy autumn and snowy winter. Flirty and aerial view The flowerbed will be enhanced by an umbrella made from metal tubes. It is not difficult to weld the structure at home. To plant flowers, first make a frame from plywood or thick film.
Original DIY crafts made from wood
Wood products always bring coziness to the decor garden plot. A wooden composition in the form of large porcini mushrooms will fit perfectly into the landscape design of the site. However, you can give the fungus a playful look by using a stump that has not been uprooted. It’s easy to create a funny grimace on wood using a chisel. And the hat can be made from thick saw cuts.
Decorative compositions assembled from wooden cuts or logs become real works of art. Animal figurines made from old branches, sticks and several logs look playful. A more practical solution is to arrange flower beds from small logs.
Create a small flower garden in several stages:
- The log is sawn into several equal parts, and thin wooden branches are cut separately to decorate the wheels.
- Each element is removed inner part and separately, an improvised cabin of a train is made from small boards.
- Wheels are attached to the logs and the composition is laid on the site in the form of a train.
To make it easier to care for flowers, plants are planted in separate pots, which are simply placed in recesses.
Functional homemade products assembled with your own hands deserve special attention - country furniture assembled from scrap materials. The easiest way to make objects is from cut down thick wood. It is enough to make a table from the base of the trunk, and less thick logs will be used to create chairs. A small bench is assembled from individual branches and boards. It is not recommended to paint such furniture with colored paints - the natural texture of wood, coated with a colorless water-repellent varnish, looks more elegant.
A popular option for crafts is animal figurines collected from tree cuts. You can put together a composition from a couple of owls located on a stump. The stage of assembling homemade products created with your own hands takes a little time: from large saw cuts they make bodies on which they attach Round eyes and wings.
Do-it-yourself crafts for a country children's corner
Any tree - best option for decorating a children's playground at the dacha. Various materials will be useful in the work: logs, hemp, boards. Creating crafts for the garden with your own hands is a fun activity in which all family members can take part. Simple forms, a minimum of details, bright colors - such figures look elegant and fun.
Easy to assemble figures from different materials. As an option - a set of wooden poles, car tires.
It’s easy to build a figurine near the playground:
- The tire is dug halfway into the ground.
- A pillar 8-10 cm thick is dug in front of the tire.
- An improvised muzzle made from a small log is attached to the top of the log. The details of the figurine (tail, ears, eyes) are cut out from plastic bottles.
- You can color the figurine to match any animal.
In order for a child to have fun spending time on the site, it is advisable to create not just decorative crafts, but gaming.
As an option, install plywood animal figures. Holes of different widths are made in the canvas through which balls can be thrown.
The solution is to design trains from small logs of the same size. To build the structure, you will need logs, paint, and tools.
Main stages of work:
- Holes are made in the base logs (an even number) of the same size.
- The bases are laid out on the ground at equal intervals and painted in one color.
- Log “cars” painted with multi-colored bright paints are placed perpendicularly on the bases.
- To highlight the “locomotive”, a pipe and a small “cabin” block are attached to the log.
Flowerbeds decorated in small metal barrels, will add brightness to the playground. Kids will love taking care of the flowers themselves, planted in colorful flowerpots.
Amazing crafts at the dacha are a great chance to give products a “second life” and decorate the area in an original way. With a little time and diligence, you can add functionality to modern, laconic decor, or simply decorate the area with figurines of your favorite cartoon characters.
Video about original crafts at the dacha
A summer cottage is an area where you can give yourself the freedom to conduct numerous experiments and dream to your heart’s content. This manifests itself not only in interior design, but mainly in the design of a garden or vegetable garden. Inquisitive and inventive owners have long been no longer guided by expensive and standard methods for arranging their plots, since there are a lot of alternative solutions for virtually all areas of activity.
There are several types of vertical beds that allow you to optimize the use of free space. Non-standard designs – a great opportunity create interesting design garden, vegetable garden, summer cottage.
This type of beds is in most cases used for growing ornamental plants or herbs.
Materials for production:
Length drainpipes regulated in accordance with the wishes of the owner of the site. However, you should not make bulky beds, as they can complicate movement around the area.
Creating a bed
Stage 1. Create a container. To do this, take a drainpipe, cut it in half lengthwise and put special plugs on both sides.
Stage 2. We take the prepared metal holders and put them on the resulting frames for the beds.
Stage 3. We make holes in the pipe. They are made in those places where metal fasteners will be located.
Stage 4. We pass a cable or strong rope through the holes made.
Stage 5. Fix the cable/rope using fasteners.
Stage 6. Fill the resulting beds with expanded clay and soil.
Stage 7. Plant the plants in the beds.
Stage 8. We hang the pipes to the selected location. Sometimes a special wooden crossbar is installed for this purpose, or rather a structure in the shape of the letter “P”.
Step 9: Alternatively, a special design can be made for the pipes.
Important! A bed made of drainpipes is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four directions by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.
A bed made from a plastic bag is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.
Materials for production:
- durable polyethylene film;
- sewing machine;
- priming;
- seedling.
In order for the bed to be strong, it is recommended Special attention pay attention to thickness polyethylene film, which in this case will act as the “framework” of the structure. Minimum thickness films - 0.2 millimeters.
The process of creating a polyethylene bed
Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the bed being created. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the bed is twenty centimeters.
Step 2. Sew the rectangles together, leaving only the top part of the bag unconnected.
Step 3. We sew a handle to the future bed, the strength of which will allow it to withstand the weight of the bag filled with soil. It should also be taken into account that when watering the weight will increase.
Step 4. Fill the bag with fertilized soil.
Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary for planting seedlings in the garden bed.
Step 6. Plant seedlings.
Step 7. Regularly water the soil and add the necessary fertilizers.
With these simple steps you can get a cheap and useful garden bed.
An integral element of every summer cottage is a compost heap. This is the place where all sorts of biochemical reactions take place to create fertilizers.
To create fertilizers that will satisfy all the requirements placed on them, you should carefully consider several key steps: creating a container and directly making the compost itself correctly. Let's talk about each of them in more detail.
Stage 1. Take eight support posts of the same length.
Stage 2. Treat the bottom of the wooden posts with motor oil or tar.
Stage 3. We dig the posts into the ground so that they are reliable and stable. If the compost bin will be located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.
Stage 4. Between each two adjacent posts we nail the crossbars so that we end up with three independent sections. Be sure to leave gaps that will serve as ventilation holes.
Stage 5. In two sections, we nail the boards horizontally to half the height of the pillars. In these places it is planned to create two small doors.
Step 6. The remaining section will have a large door, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.
Stage 7. Install the covers. To do this, you can use one large solid board.
Stage 8. Install the pre-prepared doors.
Stage 9. We provide the doors with handles and latches.
Stage 10. We process the wood using special impregnations.
Stage 11. Paint the box in any color that suits your preferences.
Many gardeners mistakenly believe that any components can be dumped into a compost heap. In reality, to create the right biofertilizer, the “ingredients” must be carefully selected.
Among the required components compost heap the following components:
- peat;
- ash;
- needles;
- tree branches;
- leaves;
- hay or grass;
- wood ash;
- plant roots;
- raw vegetables and fruits, etc.
All elements are randomly mixed in a heap. To speed up chemical reactions It is recommended to cover the pile with a tarpaulin (this is especially true if there is no box).
Trips to the dacha with the family require the presence of entertainment elements on the site that will delight children. The most common way to keep young summer residents occupied is a swing.
Building a swing yourself is not an easy task, but it is quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build comfortable structures with a comfortable place to sit.
Structural components:
- two logs;
- strong rope.
Indicators:
- log diameter – 85 mm;
- log length – 700 mm;
- distance between ropes – 500 mm.
Making a swing
Stage 1. We stretch the ropes between the logs.
Stage 2. Wrap ropes around each log.
Stage 3. Let the ropes out.
Stage 4. Tighten the ropes to 3 knots.
Stage 5. Attach the swing to the tree.
Important: this swing is designed for only one person.
Garden path from scrap materials
There are several types of garden paths that you can easily make with your own hands.
Step 1. Remove the sidewall from the tire using a knife or saw.
Step 2. Cut the tires.
Step 3. Line the space with corrugated stripes.
Step 4. Paint the path with paint.
Step 5. Sprinkle with stone chips.
This is an economical option for those who do not want to rack their brains and waste time on a full-fledged garden path. Tire paths are usually used for vegetable gardens, as they are easily laid in the ground.
Stage 1. Paint the corks in different colors.
Stage 2. Dig a small trench.
Stage 3. We drive in supports to strengthen the future path.
Stage 4. We construct the formwork using boards.
Stage 5. Install spacers along the edges of the trench.
Stage 6. Place crushed stone deep into the trench and compact it thoroughly.
Stage 7. Make a solution from sand, cement, glue and water.
Stage 8. Pour the solution into the trench.
Stage 9. Press in the plugs in random order. Smooth multi-colored stripes look interesting.
These are the simplest and quick ways make a garden path without purchasing expensive materials.
DIY tools
The expression “everything comes in handy around the house” turns out to be more relevant when it comes to cans. From this plastic container you can make a large number of indispensable tools that are actively used in the process of dacha work.
To make this tool, we only need a sharp knife and the container itself.
Stage 1. Cut off the bottom of the canister.
Stage 2. Mark a cut line for the scoop on the container so that the handle of the canister is the handle of the future tool.
Stage 3. Cut off excess material.
As a result of these simple steps, we get an excellent scoop with a comfortable handle.
Materials:
Manufacturing
Step 1. Wash the canister thoroughly so that no odor remains in it.
Stage 2. Cut the canister vertically into two parts.
Stage 3. We make a groove on the board using a woodworking machine.
Stage 4. Apply glue to the plywood and insert it into the bottom of the canister.
Stage 5. Paint the resulting shelf using a spray can.
Of course, such a design will not withstand heavy weight, however, it is quite suitable for storing small parts.
Materials:
- 40 cans;
- scissors;
- rope;
- paper;
- marker.
Stage 1. Pierce the top of the canisters with a knife.
Stage 2. Make a stencil from paper.
Stage 3. Apply it to the canister and outline it with a marker.
Stage 4. Cut out large holes using scissors.
Stage 5. We stack the prepared canisters in several rows, tying each row by hooking a rope under the handles of the containers.
Stage 6. We tie all the rows around the perimeter for greater strength.
Stage 7. If you plan to lean the cabinet against the wall, then drill it to the surface.
Stage 8. Place heavy objects - stones or bricks - in the bottom row.
The result is a fairly spacious and functional rack that will help get rid of the problem of storing many small parts.
Be resourceful and bold in implementing your ideas. Good luck!
Video – DIY crafts for a summer cottage
Video - We do it ourselves for the dacha